diff options
author | Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> | 2017-08-30 13:50:39 +0200 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2017-10-09 21:01:45 +0100 |
commit | e72a060151e5bb673af24993665e270fc4f674a7 (patch) | |
tree | 4931e3d26c32eb9f554b91b9a10d4b50d1f24a51 /drivers/iio | |
parent | c1375d671a352c525d76a8aba306667e0000d98a (diff) | |
download | linux-e72a060151e5bb673af24993665e270fc4f674a7.tar.gz linux-e72a060151e5bb673af24993665e270fc4f674a7.tar.bz2 linux-e72a060151e5bb673af24993665e270fc4f674a7.zip |
iio: st_sensors: add register mask for status register
Introduce register mask for data-ready status register since
pressure sensors (e.g. LPS22HB) export just two channels
(BIT(0) and BIT(1)) and BIT(2) is marked reserved while in
st_sensors_new_samples_available() value read from status register
is masked using 0x7.
Moreover do not mask status register using active_scan_mask since
now status value is properly masked and if the result is not zero the
interrupt has to be consumed by the driver. This fix an issue on LPS25H
and LPS331AP where channel definition is swapped respect to status
register.
Furthermore that change allows to properly support new devices
(e.g LIS2DW12) that report just ZYXDA (data-ready) field in status register
to figure out if the interrupt has been generated by the device.
Fixes: 97865fe41322 (iio: st_sensors: verify interrupt event to status)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio')
-rw-r--r-- | drivers/iio/accel/st_accel_core.c | 35 | ||||
-rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_core.c | 2 | ||||
-rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_trigger.c | 16 | ||||
-rw-r--r-- | drivers/iio/gyro/st_gyro_core.c | 15 | ||||
-rw-r--r-- | drivers/iio/magnetometer/st_magn_core.c | 10 | ||||
-rw-r--r-- | drivers/iio/pressure/st_pressure_core.c | 15 |
6 files changed, 65 insertions, 28 deletions
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 1a2e54ff473a..140ba26f6131 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -164,7 +164,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = 0x00, .addr_ihl = 0x25, .mask_ihl = 0x02, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, @@ -236,7 +239,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, @@ -318,7 +324,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = 0x00, .addr_ihl = 0x23, .mask_ihl = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, .ig1 = { .en_addr = 0x23, .en_mask = 0x08, @@ -389,7 +398,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .drdy_irq = { .addr = 0x21, .mask_int1 = 0x04, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -451,7 +463,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -569,7 +584,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .drdy_irq = { .addr = 0x21, .mask_int1 = 0x04, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -640,7 +658,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = 0x00, .addr_ihl = 0x25, .mask_ihl = 0x02, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 02e833b14db0..34115f05d5c4 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -470,7 +470,7 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable) * different one. Take into account irq status register * to understand if irq trigger can be properly supported */ - if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) + if (sdata->sensor_settings->drdy_irq.stat_drdy.addr) sdata->hw_irq_trigger = enable; return 0; } diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index fa73e6795359..fdcc5a891958 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -31,7 +31,7 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev, int ret; /* How would I know if I can't check it? */ - if (!sdata->sensor_settings->drdy_irq.addr_stat_drdy) + if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) return -EINVAL; /* No scan mask, no interrupt */ @@ -39,23 +39,15 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev, return 0; ret = sdata->tf->read_byte(&sdata->tb, sdata->dev, - sdata->sensor_settings->drdy_irq.addr_stat_drdy, + sdata->sensor_settings->drdy_irq.stat_drdy.addr, &status); if (ret < 0) { dev_err(sdata->dev, "error checking samples available\n"); return ret; } - /* - * the lower bits of .active_scan_mask[0] is directly mapped - * to the channels on the sensor: either bit 0 for - * one-dimensional sensors, or e.g. x,y,z for accelerometers, - * gyroscopes or magnetometers. No sensor use more than 3 - * channels, so cut the other status bits here. - */ - status &= 0x07; - if (status & (u8)indio_dev->active_scan_mask[0]) + if (status & sdata->sensor_settings->drdy_irq.stat_drdy.mask) return 1; return 0; @@ -212,7 +204,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, * it was "our" interrupt. */ if (sdata->int_pin_open_drain && - sdata->sensor_settings->drdy_irq.addr_stat_drdy) + sdata->sensor_settings->drdy_irq.stat_drdy.addr) irq_trig |= IRQF_SHARED; err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 4cf85aa01dde..22c0c1732996 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -118,7 +118,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, @@ -188,7 +191,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, @@ -253,7 +259,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 703de313c418..ace72c57f53c 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -317,7 +317,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { }, .drdy_irq = { /* drdy line is routed drdy pin */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, @@ -361,7 +364,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .drdy_irq = { .addr = 0x62, .mask_int1 = 0x01, - .addr_stat_drdy = 0x67, + .stat_drdy = { + .addr = 0x67, + .mask = 0x07, + }, }, .multi_read_bit = false, .bootime = 2, diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 86120715913b..5f8358e23f5b 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -287,7 +287,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = true, .bootime = 2, @@ -395,7 +398,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = true, .bootime = 2, @@ -456,7 +462,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x12, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = false, .bootime = 2, |