diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-23 16:16:31 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-23 16:16:31 -0700 |
commit | bd7e8c996f5aba542f416ee6d19e91fd3668674f (patch) | |
tree | d75c0094e0e2f82d18e02fbb7e5362984b36863f /drivers/input | |
parent | 40a03b750bb3ded71a0f21a0b7dfbf3b24068dcb (diff) | |
parent | bb0bc0cfeabc0d6865865e8d3a601bea6711f951 (diff) | |
download | linux-bd7e8c996f5aba542f416ee6d19e91fd3668674f.tar.gz linux-bd7e8c996f5aba542f416ee6d19e91fd3668674f.tar.bz2 linux-bd7e8c996f5aba542f416ee6d19e91fd3668674f.zip |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for ADC driven joysticks
- a new Zintix touchscreen driver
- enhancements to Intel SoC button array driver
- support for F3A "function" in Synaptics RMI4 driver
- assorted driver fixups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
Input: Add MAINTAINERS entry for SiS i2c touch input driver
Input: evdev - per-client waitgroups
Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1
Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2
Input: synaptics-rmi4 - support bootloader v8 in f34v7
Input: synaptics-rmi4 - add support for F3A
Input: synaptics-rmi4 - rename f30_data to gpio_data
Input: add zinitix touchscreen driver
dt-bindings: input/touchscreen: add bindings for zinitix
Input: joystick - add ADC attached joystick driver.
dt-bindings: input: Add docs for ADC driven joystick
Input: sun4i-ps2 - fix handling of platform_get_irq() error
Input: twl4030_keypad - fix handling of platform_get_irq() error
Input: omap4-keypad - fix handling of platform_get_irq() error
Input: ep93xx_keypad - fix handling of platform_get_irq() error
Input: stmfts - fix a & vs && typo
Input: imx6ul_tsc - unify open/close and PM paths
Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()
Input: elants_i2c - fix typo for an attribute to show calibration count
Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information.
...
Diffstat (limited to 'drivers/input')
25 files changed, 1337 insertions, 160 deletions
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index e494295d1c7b..95f90699d2b1 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -28,7 +28,6 @@ struct evdev { int open; struct input_handle handle; - wait_queue_head_t wait; struct evdev_client __rcu *grab; struct list_head client_list; spinlock_t client_lock; /* protects client_list */ @@ -43,6 +42,7 @@ struct evdev_client { unsigned int tail; unsigned int packet_head; /* [future] position of the first element of next packet */ spinlock_t buffer_lock; /* protects access to buffer, head and tail */ + wait_queue_head_t wait; struct fasync_struct *fasync; struct evdev *evdev; struct list_head node; @@ -245,7 +245,6 @@ static void evdev_pass_values(struct evdev_client *client, const struct input_value *vals, unsigned int count, ktime_t *ev_time) { - struct evdev *evdev = client->evdev; const struct input_value *v; struct input_event event; struct timespec64 ts; @@ -282,7 +281,7 @@ static void evdev_pass_values(struct evdev_client *client, spin_unlock(&client->buffer_lock); if (wakeup) - wake_up_interruptible_poll(&evdev->wait, + wake_up_interruptible_poll(&client->wait, EPOLLIN | EPOLLOUT | EPOLLRDNORM | EPOLLWRNORM); } @@ -426,11 +425,11 @@ static void evdev_hangup(struct evdev *evdev) struct evdev_client *client; spin_lock(&evdev->client_lock); - list_for_each_entry(client, &evdev->client_list, node) + list_for_each_entry(client, &evdev->client_list, node) { kill_fasync(&client->fasync, SIGIO, POLL_HUP); + wake_up_interruptible_poll(&client->wait, EPOLLHUP | EPOLLERR); + } spin_unlock(&evdev->client_lock); - - wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR); } static int evdev_release(struct inode *inode, struct file *file) @@ -479,6 +478,7 @@ static int evdev_open(struct inode *inode, struct file *file) if (!client) return -ENOMEM; + init_waitqueue_head(&client->wait); client->bufsize = bufsize; spin_lock_init(&client->buffer_lock); client->evdev = evdev; @@ -595,7 +595,7 @@ static ssize_t evdev_read(struct file *file, char __user *buffer, break; if (!(file->f_flags & O_NONBLOCK)) { - error = wait_event_interruptible(evdev->wait, + error = wait_event_interruptible(client->wait, client->packet_head != client->tail || !evdev->exist || client->revoked); if (error) @@ -613,7 +613,7 @@ static __poll_t evdev_poll(struct file *file, poll_table *wait) struct evdev *evdev = client->evdev; __poll_t mask; - poll_wait(file, &evdev->wait, wait); + poll_wait(file, &client->wait, wait); if (evdev->exist && !client->revoked) mask = EPOLLOUT | EPOLLWRNORM; @@ -946,7 +946,7 @@ static int evdev_revoke(struct evdev *evdev, struct evdev_client *client, client->revoked = true; evdev_ungrab(evdev, client); input_flush_device(&evdev->handle, file); - wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR); + wake_up_interruptible_poll(&client->wait, EPOLLHUP | EPOLLERR); return 0; } @@ -1358,7 +1358,6 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev, INIT_LIST_HEAD(&evdev->client_list); spin_lock_init(&evdev->client_lock); mutex_init(&evdev->mutex); - init_waitqueue_head(&evdev->wait); evdev->exist = true; dev_no = minor; diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index f699538bdac4..44fe6f2f063c 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -323,11 +323,14 @@ static int adjust_dual(int *begin, int step, int *end, int eq, int mu) p = begin + step; s = p == end ? f + 1 : *p; - for (; p != end; p += step) - if (*p < f) - s = f, f = *p; - else if (*p < s) + for (; p != end; p += step) { + if (*p < f) { + s = f; + f = *p; + } else if (*p < s) { s = *p; + } + } c = (f + s + 1) / 2; if (c == 0 || (c > mu && (!eq || mu > 0))) diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index eb031b7a4866..b080f0cfb068 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -42,6 +42,16 @@ config JOYSTICK_A3D To compile this driver as a module, choose M here: the module will be called a3d. +config JOYSTICK_ADC + tristate "Simple joystick connected over ADC" + depends on IIO + select IIO_BUFFER_CB + help + Say Y here if you have a simple joystick connected over ADC. + + To compile this driver as a module, choose M here: the + module will be called adc-joystick. + config JOYSTICK_ADI tristate "Logitech ADI digital joysticks and gamepads" select GAMEPORT diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index 8656023f6ef5..58232b3057d3 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -6,6 +6,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_JOYSTICK_A3D) += a3d.o +obj-$(CONFIG_JOYSTICK_ADC) += adc-joystick.o obj-$(CONFIG_JOYSTICK_ADI) += adi.o obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c new file mode 100644 index 000000000000..78ebca7d400a --- /dev/null +++ b/drivers/input/joystick/adc-joystick.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Input driver for joysticks connected over ADC. + * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu> + */ +#include <linux/ctype.h> +#include <linux/input.h> +#include <linux/iio/iio.h> +#include <linux/iio/consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> + +#include <asm/unaligned.h> + +struct adc_joystick_axis { + u32 code; + s32 range[2]; + s32 fuzz; + s32 flat; +}; + +struct adc_joystick { + struct input_dev *input; + struct iio_cb_buffer *buffer; + struct adc_joystick_axis *axes; + struct iio_channel *chans; + int num_chans; +}; + +static int adc_joystick_handle(const void *data, void *private) +{ + struct adc_joystick *joy = private; + enum iio_endian endianness; + int bytes, msb, val, idx, i; + const u16 *data_u16; + bool sign; + + bytes = joy->chans[0].channel->scan_type.storagebits >> 3; + + for (i = 0; i < joy->num_chans; ++i) { + idx = joy->chans[i].channel->scan_index; + endianness = joy->chans[i].channel->scan_type.endianness; + msb = joy->chans[i].channel->scan_type.realbits - 1; + sign = tolower(joy->chans[i].channel->scan_type.sign) == 's'; + + switch (bytes) { + case 1: + val = ((const u8 *)data)[idx]; + break; + case 2: + data_u16 = (const u16 *)data + idx; + + /* + * Data is aligned to the sample size by IIO core. + * Call `get_unaligned_xe16` to hide type casting. + */ + if (endianness == IIO_BE) + val = get_unaligned_be16(data_u16); + else if (endianness == IIO_LE) + val = get_unaligned_le16(data_u16); + else /* IIO_CPU */ + val = *data_u16; + break; + default: + return -EINVAL; + } + + val >>= joy->chans[i].channel->scan_type.shift; + if (sign) + val = sign_extend32(val, msb); + else + val &= GENMASK(msb, 0); + input_report_abs(joy->input, joy->axes[i].code, val); + } + + input_sync(joy->input); + + return 0; +} + +static int adc_joystick_open(struct input_dev *dev) +{ + struct adc_joystick *joy = input_get_drvdata(dev); + struct device *devp = &dev->dev; + int ret; + + ret = iio_channel_start_all_cb(joy->buffer); + if (ret) + dev_err(devp, "Unable to start callback buffer: %d\n", ret); + + return ret; +} + +static void adc_joystick_close(struct input_dev *dev) +{ + struct adc_joystick *joy = input_get_drvdata(dev); + + iio_channel_stop_all_cb(joy->buffer); +} + +static void adc_joystick_cleanup(void *data) +{ + iio_channel_release_all_cb(data); +} + +static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) +{ + struct adc_joystick_axis *axes; + struct fwnode_handle *child; + int num_axes, error, i; + + num_axes = device_get_child_node_count(dev); + if (!num_axes) { + dev_err(dev, "Unable to find child nodes\n"); + return -EINVAL; + } + + if (num_axes != joy->num_chans) { + dev_err(dev, "Got %d child nodes for %d channels\n", + num_axes, joy->num_chans); + return -EINVAL; + } + + axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL); + if (!axes) + return -ENOMEM; + + device_for_each_child_node(dev, child) { + error = fwnode_property_read_u32(child, "reg", &i); + if (error) { + dev_err(dev, "reg invalid or missing\n"); + goto err_fwnode_put; + } + + if (i >= num_axes) { + error = -EINVAL; + dev_err(dev, "No matching axis for reg %d\n", i); + goto err_fwnode_put; + } + + error = fwnode_property_read_u32(child, "linux,code", + &axes[i].code); + if (error) { + dev_err(dev, "linux,code invalid or missing\n"); + goto err_fwnode_put; + } + + error = fwnode_property_read_u32_array(child, "abs-range", + axes[i].range, 2); + if (error) { + dev_err(dev, "abs-range invalid or missing\n"); + goto err_fwnode_put; + } + + fwnode_property_read_u32(child, "abs-fuzz", &axes[i].fuzz); + fwnode_property_read_u32(child, "abs-flat", &axes[i].flat); + + input_set_abs_params(joy->input, axes[i].code, + axes[i].range[0], axes[i].range[1], + axes[i].fuzz, axes[i].flat); + input_set_capability(joy->input, EV_ABS, axes[i].code); + } + + joy->axes = axes; + + return 0; + +err_fwnode_put: + fwnode_handle_put(child); + return error; +} + +static int adc_joystick_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adc_joystick *joy; + struct input_dev *input; + int error; + int bits; + int i; + + joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL); + if (!joy) + return -ENOMEM; + + joy->chans = devm_iio_channel_get_all(dev); + if (IS_ERR(joy->chans)) { + error = PTR_ERR(joy->chans); + if (error != -EPROBE_DEFER) + dev_err(dev, "Unable to get IIO channels"); + return error; + } + + /* Count how many channels we got. NULL terminated. */ + for (i = 0; joy->chans[i].indio_dev; i++) { + bits = joy->chans[i].channel->scan_type.storagebits; + if (!bits || bits > 16) { + dev_err(dev, "Unsupported channel storage size\n"); + return -EINVAL; + } + if (bits != joy->chans[0].channel->scan_type.storagebits) { + dev_err(dev, "Channels must have equal storage size\n"); + return -EINVAL; + } + } + joy->num_chans = i; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "Unable to allocate input device\n"); + return -ENOMEM; + } + + joy->input = input; + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->open = adc_joystick_open; + input->close = adc_joystick_close; + + error = adc_joystick_set_axes(dev, joy); + if (error) + return error; + + input_set_drvdata(input, joy); + error = input_register_device(input); + if (error) { + dev_err(dev, "Unable to register input device\n"); + return error; + } + + joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy); + if (IS_ERR(joy->buffer)) { + dev_err(dev, "Unable to allocate callback buffer\n"); + return PTR_ERR(joy->buffer); + } + + error = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer); + if (error) { + dev_err(dev, "Unable to add action\n"); + return error; + } + + return 0; +} + +static const struct of_device_id adc_joystick_of_match[] = { + { .compatible = "adc-joystick", }, + { } +}; +MODULE_DEVICE_TABLE(of, adc_joystick_of_match); + +static struct platform_driver adc_joystick_driver = { + .driver = { + .name = "adc-joystick", + .of_match_table = adc_joystick_of_match, + }, + .probe = adc_joystick_probe, +}; +module_platform_driver(adc_joystick_driver); + +MODULE_DESCRIPTION("Input driver for joysticks connected over ADC"); +MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index 7c70492d9d6b..f831f01501d5 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -250,8 +250,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev) } keypad->irq = platform_get_irq(pdev, 0); - if (!keypad->irq) { - err = -ENXIO; + if (keypad->irq < 0) { + err = keypad->irq; goto failed_free; } diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index 94c94d7f5155..d6c924032aaa 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -240,10 +240,8 @@ static int omap4_keypad_probe(struct platform_device *pdev) } irq = platform_get_irq(pdev, 0); - if (!irq) { - dev_err(&pdev->dev, "no keyboard irq assigned\n"); - return -EINVAL; - } + if (irq < 0) + return irq; keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL); if (!keypad_data) { diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index af3a6824f1a4..77e0743a3cf8 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -50,7 +50,7 @@ struct twl4030_keypad { bool autorepeat; unsigned int n_rows; unsigned int n_cols; - unsigned int irq; + int irq; struct device *dbg_dev; struct input_dev *input; @@ -376,10 +376,8 @@ static int twl4030_kp_probe(struct platform_device *pdev) } kp->irq = platform_get_irq(pdev, 0); - if (!kp->irq) { - dev_err(&pdev->dev, "no keyboard irq assigned\n"); - return -EINVAL; - } + if (kp->irq < 0) + return kp->irq; error = matrix_keypad_build_keymap(keymap_data, NULL, TWL4030_MAX_ROWS, diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 08520b3a18b8..cae1a3fae83a 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/acpi.h> +#include <linux/dmi.h> #include <linux/gpio/consumer.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> @@ -23,6 +24,7 @@ struct soc_button_info { unsigned int event_code; bool autorepeat; bool wakeup; + bool active_low; }; struct soc_device_data { @@ -42,22 +44,65 @@ struct soc_button_data { }; /* + * Some 2-in-1s which use the soc_button_array driver have this ugly issue in + * their DSDT where the _LID method modifies the irq-type settings of the GPIOs + * used for the power and home buttons. The intend of this AML code is to + * disable these buttons when the lid is closed. + * The AML does this by directly poking the GPIO controllers registers. This is + * problematic because when re-enabling the irq, which happens whenever _LID + * gets called with the lid open (e.g. on boot and on resume), it sets the + * irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the + * type to, and expects it to be, IRQ_TYPE_EDGE_BOTH. + * To work around this we don't set gpio_keys_button.gpio on these 2-in-1s, + * instead we get the irq for the GPIO ourselves, configure it as + * IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and pass + * the irq in gpio_keys_button.irq. Below is a list of affected devices. + */ +static const struct dmi_system_id dmi_use_low_level_irq[] = { + { + /* + * Acer Switch 10 SW5-012. _LID method messes with home- and + * power-button GPIO IRQ settings. When (re-)enabling the irq + * it ors in its own flags without clearing the previous set + * ones, leading to an irq-type of IRQ_TYPE_LEVEL_LOW | + * IRQ_TYPE_LEVEL_HIGH causing a continuous interrupt storm. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), + }, + }, + { + /* + * Acer One S1003. _LID method messes with power-button GPIO + * IRQ settings, leading to a non working power-button. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "One S1003"), + }, + }, + {} /* Terminating entry */ +}; + +/* * Get the Nth GPIO number from the ACPI object. */ -static int soc_button_lookup_gpio(struct device *dev, int acpi_index) +static int soc_button_lookup_gpio(struct device *dev, int acpi_index, + int *gpio_ret, int *irq_ret) { struct gpio_desc *desc; - int gpio; desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS); if (IS_ERR(desc)) return PTR_ERR(desc); - gpio = desc_to_gpio(desc); + *gpio_ret = desc_to_gpio(desc); + *irq_ret = gpiod_to_irq(desc); gpiod_put(desc); - return gpio; + return 0; } static struct platform_device * @@ -69,9 +114,8 @@ soc_button_device_create(struct platform_device *pdev, struct platform_device *pd; struct gpio_keys_button *gpio_keys; struct gpio_keys_platform_data *gpio_keys_pdata; + int error, gpio, irq; int n_buttons = 0; - int gpio; - int error; for (info = button_info; info->name; info++) if (info->autorepeat == autorepeat) @@ -91,8 +135,8 @@ soc_button_device_create(struct platform_device *pdev, if (info->autorepeat != autorepeat) continue; - gpio = soc_button_lookup_gpio(&pdev->dev, info->acpi_index); - if (!gpio_is_valid(gpio)) { + error = soc_button_lookup_gpio(&pdev->dev, info->acpi_index, &gpio, &irq); + if (error || irq < 0) { /* * Skip GPIO if not present. Note we deliberately * ignore -EPROBE_DEFER errors here. On some devices @@ -107,10 +151,18 @@ soc_button_device_create(struct platform_device *pdev, continue; } + /* See dmi_use_low_level_irq[] comment */ + if (!autorepeat && dmi_check_system(dmi_use_low_level_irq)) { + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); + gpio_keys[n_buttons].irq = irq; + gpio_keys[n_buttons].gpio = -ENOENT; + } else { + gpio_keys[n_buttons].gpio = gpio; + } + gpio_keys[n_buttons].type = info->event_type; gpio_keys[n_buttons].code = info->event_code; - gpio_keys[n_buttons].gpio = gpio; - gpio_keys[n_buttons].active_low = 1; + gpio_keys[n_buttons].active_low = info->active_low; gpio_keys[n_buttons].desc = info->name; gpio_keys[n_buttons].wakeup = info->wakeup; /* These devices often use cheap buttons, use 50 ms debounce */ @@ -173,6 +225,7 @@ static int soc_button_parse_btn_desc(struct device *dev, } info->event_type = EV_KEY; + info->active_low = true; info->acpi_index = soc_button_get_acpi_object_int(&desc->package.elements[1]); upage = soc_button_get_acpi_object_int(&desc->package.elements[3]); @@ -383,11 +436,11 @@ static int soc_button_probe(struct platform_device *pdev) * Platforms" */ static const struct soc_button_info soc_button_PNP0C40[] = { - { "power", 0, EV_KEY, KEY_POWER, false, true }, - { "home", 1, EV_KEY, KEY_LEFTMETA, false, true }, - { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false }, - { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false }, - { "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false }, + { "power", 0, EV_KEY, KEY_POWER, false, true, true }, + { "home", 1, EV_KEY, KEY_LEFTMETA, false, true, true }, + { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true }, + { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true }, + { "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false, true }, { } }; @@ -395,6 +448,15 @@ static const struct soc_device_data soc_device_PNP0C40 = { .button_info = soc_button_PNP0C40, }; +static const struct soc_button_info soc_button_INT33D3[] = { + { "tablet_mode", 0, EV_SW, SW_TABLET_MODE, false, false, false }, + { } +}; + +static const struct soc_device_data soc_device_INT33D3 = { + .button_info = soc_button_INT33D3, +}; + /* * Special device check for Surface Book 2 and Surface Pro (2017). * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned @@ -444,9 +506,9 @@ static int soc_device_check_MSHW0040(struct device *dev) * Obtained from DSDT/testing. */ static const struct soc_button_info soc_button_MSHW0040[] = { - { "power", 0, EV_KEY, KEY_POWER, false, true }, - { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false }, - { "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false }, + { "power", 0, EV_KEY, KEY_POWER, false, true, true }, + { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true }, + { "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false, true }, { } }; @@ -457,6 +519,8 @@ static const struct soc_device_data soc_device_MSHW0040 = { static const struct acpi_device_id soc_button_acpi_match[] = { { "PNP0C40", (unsigned long)&soc_device_PNP0C40 }, + { "INT33D3", (unsigned long)&soc_device_INT33D3 }, + { "ID9001", (unsigned long)&soc_device_INT33D3 }, { "ACPI0011", 0 }, /* Microsoft Surface Devices (5th and 6th generation) */ diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 4b81b2d0fe06..82577095e175 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -179,12 +179,14 @@ static const char * const smbus_pnp_ids[] = { "LEN0093", /* T480 */ "LEN0096", /* X280 */ "LEN0097", /* X280 -> ALPS trackpoint */ - "LEN0099", /* X1 Extreme 1st */ + "LEN0099", /* X1 Extreme Gen 1 / P1 Gen 1 */ "LEN009b", /* T580 */ + "LEN0402", /* X1 Extreme Gen 2 / P1 Gen 2 */ "LEN200f", /* T450s */ "LEN2044", /* L470 */ "LEN2054", /* E480 */ "LEN2055", /* E580 */ + "LEN2068", /* T14 Gen 1 */ "SYN3052", /* HP EliteBook 840 G4 */ "SYN3221", /* HP 15-ay000 */ "SYN323d", /* HP Spectre X360 13-w013dx */ @@ -1752,7 +1754,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse, .kernel_tracking = false, .topbuttonpad = topbuttonpad, }, - .f30_data = { + .gpio_data = { .buttonpad = SYN_CAP_CLICKPAD(info->ext_cap_0c), .trackstick_buttons = !!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10), diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig index a212ff706f74..16119f760d11 100644 --- a/drivers/input/rmi4/Kconfig +++ b/drivers/input/rmi4/Kconfig @@ -100,6 +100,14 @@ config RMI4_F34 device via the firmware loader interface. This is triggered using a sysfs attribute. +config RMI4_F3A + bool "RMI4 Function 3A (GPIO)" + help + Say Y here if you want to add support for RMI4 function 3A. + + Function 3A provides GPIO support for RMI4 devices. This includes + support for buttons on TouchPads and ClickPads. + config RMI4_F54 bool "RMI4 Function 54 (Analog diagnostics)" depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m) diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile index f17631656987..02f14c846861 100644 --- a/drivers/input/rmi4/Makefile +++ b/drivers/input/rmi4/Makefile @@ -10,6 +10,7 @@ rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o rmi_f34v7.o +rmi_core-$(CONFIG_RMI4_F3A) += rmi_f3a.o rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o rmi_core-$(CONFIG_RMI4_F55) += rmi_f55.o diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c index af706a583656..47d1b97ed6cf 100644 --- a/drivers/input/rmi4/rmi_bus.c +++ b/drivers/input/rmi4/rmi_bus.c @@ -365,6 +365,9 @@ static struct rmi_function_handler *fn_handlers[] = { #ifdef CONFIG_RMI4_F34 &rmi_f34_handler, #endif +#ifdef CONFIG_RMI4_F3A + &rmi_f3a_handler, +#endif #ifdef CONFIG_RMI4_F54 &rmi_f54_handler, #endif diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h index 65bfaa95e193..1c6c6086c0e5 100644 --- a/drivers/input/rmi4/rmi_driver.h +++ b/drivers/input/rmi4/rmi_driver.h @@ -135,6 +135,7 @@ extern struct rmi_function_handler rmi_f11_handler; extern struct rmi_function_handler rmi_f12_handler; extern struct rmi_function_handler rmi_f30_handler; extern struct rmi_function_handler rmi_f34_handler; +extern struct rmi_function_handler rmi_f3a_handler; extern struct rmi_function_handler rmi_f54_handler; extern struct rmi_function_handler rmi_f55_handler; #endif diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c index a90dad1d9ac7..35045f161dc2 100644 --- a/drivers/input/rmi4/rmi_f30.c +++ b/drivers/input/rmi4/rmi_f30.c @@ -168,17 +168,17 @@ static int rmi_f30_config(struct rmi_function *fn) rmi_get_platform_data(fn->rmi_dev); int error; - /* can happen if f30_data.disable is set */ + /* can happen if gpio_data.disable is set */ if (!f30) return 0; - if (pdata->f30_data.trackstick_buttons) { + if (pdata->gpio_data.trackstick_buttons) { /* Try [re-]establish link to F03. */ f30->f03 = rmi_find_function(fn->rmi_dev, 0x03); f30->trackstick_buttons = f30->f03 != NULL; } - if (pdata->f30_data.disable) { + if (pdata->gpio_data.disable) { drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask); } else { /* Write Control Register values back to device */ @@ -245,10 +245,10 @@ static int rmi_f30_map_gpios(struct rmi_function *fn, if (!rmi_f30_is_valid_button(i, f30->ctrl)) continue; - if (pdata->f30_data.trackstick_buttons && + if (pdata->gpio_data.trackstick_buttons && i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) { f30->gpioled_key_map[i] = trackstick_button++; - } else if (!pdata->f30_data.buttonpad || !button_mapped) { + } else if (!pdata->gpio_data.buttonpad || !button_mapped) { f30->gpioled_key_map[i] = button; input_set_capability(input, EV_KEY, button++); button_mapped = true; @@ -264,7 +264,7 @@ static int rmi_f30_map_gpios(struct rmi_function *fn, * but I am not sure, so use only the pdata info and the number of * mapped buttons. */ - if (pdata->f30_data.buttonpad || (button - BTN_LEFT == 1)) + if (pdata->gpio_data.buttonpad || (button - BTN_LEFT == 1)) __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); return 0; @@ -372,7 +372,7 @@ static int rmi_f30_probe(struct rmi_function *fn) struct f30_data *f30; int error; - if (pdata->f30_data.disable) + if (pdata->gpio_data.disable) return 0; if (!drv_data->input) { diff --git a/drivers/input/rmi4/rmi_f34v7.c b/drivers/input/rmi4/rmi_f34v7.c index 74f7c6f214ff..8d7ec9d89b18 100644 --- a/drivers/input/rmi4/rmi_f34v7.c +++ b/drivers/input/rmi4/rmi_f34v7.c @@ -1364,9 +1364,14 @@ int rmi_f34v7_probe(struct f34_data *f34) f34->bl_version = 6; } else if (f34->bootloader_id[1] == 7) { f34->bl_version = 7; + } else if (f34->bootloader_id[1] == 8) { + f34->bl_version = 8; } else { - dev_err(&f34->fn->dev, "%s: Unrecognized bootloader version\n", - __func__); + dev_err(&f34->fn->dev, + "%s: Unrecognized bootloader version: %d (%c) %d (%c)\n", + __func__, + f34->bootloader_id[0], f34->bootloader_id[0], + f34->bootloader_id[1], f34->bootloader_id[1]); return -EINVAL; } diff --git a/drivers/input/rmi4/rmi_f3a.c b/drivers/input/rmi4/rmi_f3a.c new file mode 100644 index 000000000000..0e8baed84dbb --- /dev/null +++ b/drivers/input/rmi4/rmi_f3a.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2012-2020 Synaptics Incorporated + */ + +#include <linux/kernel.h> +#include <linux/rmi.h> +#include <linux/input.h> +#include <linux/slab.h> +#include "rmi_driver.h" + +#define RMI_F3A_MAX_GPIO_COUNT 128 +#define RMI_F3A_MAX_REG_SIZE DIV_ROUND_UP(RMI_F3A_MAX_GPIO_COUNT, 8) + +/* Defs for Query 0 */ +#define RMI_F3A_GPIO_COUNT 0x7F + +#define RMI_F3A_DATA_REGS_MAX_SIZE RMI_F3A_MAX_REG_SIZE + +#define TRACKSTICK_RANGE_START 3 +#define TRACKSTICK_RANGE_END 6 + +struct f3a_data { + /* Query Data */ + u8 gpio_count; + + u8 register_count; + + u8 data_regs[RMI_F3A_DATA_REGS_MAX_SIZE]; + u16 *gpio_key_map; + + struct input_dev *input; + + struct rmi_function *f03; + bool trackstick_buttons; +}; + +static void rmi_f3a_report_button(struct rmi_function *fn, + struct f3a_data *f3a, unsigned int button) +{ + u16 key_code = f3a->gpio_key_map[button]; + bool key_down = !(f3a->data_regs[0] & BIT(button)); + + if (f3a->trackstick_buttons && + button >= TRACKSTICK_RANGE_START && + button <= TRACKSTICK_RANGE_END) { + rmi_f03_overwrite_button(f3a->f03, key_code, key_down); + } else { + rmi_dbg(RMI_DEBUG_FN, &fn->dev, + "%s: call input report key (0x%04x) value (0x%02x)", + __func__, key_code, key_down); + input_report_key(f3a->input, key_code, key_down); + } +} + +static irqreturn_t rmi_f3a_attention(int irq, void *ctx) +{ + struct rmi_function *fn = ctx; + struct f3a_data *f3a = dev_get_drvdata(&fn->dev); + struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); + int error; + int i; + + if (drvdata->attn_data.data) { + if (drvdata->attn_data.size < f3a->register_count) { + dev_warn(&fn->dev, + "F3A interrupted, but data is missing\n"); + return IRQ_HANDLED; + } + memcpy(f3a->data_regs, drvdata->attn_data.data, + f3a->register_count); + drvdata->attn_data.data += f3a->register_count; + drvdata->attn_data.size -= f3a->register_count; + } else { + error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr, + f3a->data_regs, f3a->register_count); + if (error) { + dev_err(&fn->dev, + "%s: Failed to read F3a data registers: %d\n", + __func__, error); + return IRQ_RETVAL(error); + } + } + + for (i = 0; i < f3a->gpio_count; i++) + if (f3a->gpio_key_map[i] != KEY_RESERVED) + rmi_f3a_report_button(fn, f3a, i); + if (f3a->trackstick_buttons) + rmi_f03_commit_buttons(f3a->f03); + + return IRQ_HANDLED; +} + +static int rmi_f3a_config(struct rmi_function *fn) +{ + struct f3a_data *f3a = dev_get_drvdata(&fn->dev); + struct rmi_driver *drv = fn->rmi_dev->driver; + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(fn->rmi_dev); + + if (!f3a) + return 0; + + if (pdata->gpio_data.trackstick_buttons) { + /* Try [re-]establish link to F03. */ + f3a->f03 = rmi_find_function(fn->rmi_dev, 0x03); + f3a->trackstick_buttons = f3a->f03 != NULL; + } + + drv->set_irq_bits(fn->rmi_dev, fn->irq_mask); + + return 0; +} + +static bool rmi_f3a_is_valid_button(int button, struct f3a_data *f3a, + u8 *query1_regs, u8 *ctrl1_regs) +{ + /* gpio exist && direction input */ + return (query1_regs[0] & BIT(button)) && !(ctrl1_regs[0] & BIT(button)); +} + +static int rmi_f3a_map_gpios(struct rmi_function *fn, struct f3a_data *f3a, + u8 *query1_regs, u8 *ctrl1_regs) +{ + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(fn->rmi_dev); + struct input_dev *input = f3a->input; + unsigned int button = BTN_LEFT; + unsigned int trackstick_button = BTN_LEFT; + bool button_mapped = false; + int i; + int button_count = min_t(u8, f3a->gpio_count, TRACKSTICK_RANGE_END); + + f3a->gpio_key_map = devm_kcalloc(&fn->dev, + button_count, + sizeof(f3a->gpio_key_map[0]), + GFP_KERNEL); + if (!f3a->gpio_key_map) { + dev_err(&fn->dev, "Failed to allocate gpio map memory.\n"); + return -ENOMEM; + } + + for (i = 0; i < button_count; i++) { + if (!rmi_f3a_is_valid_button(i, f3a, query1_regs, ctrl1_regs)) + continue; + + if (pdata->gpio_data.trackstick_buttons && + i >= TRACKSTICK_RANGE_START && + i < TRACKSTICK_RANGE_END) { + f3a->gpio_key_map[i] = trackstick_button++; + } else if (!pdata->gpio_data.buttonpad || !button_mapped) { + f3a->gpio_key_map[i] = button; + input_set_capability(input, EV_KEY, button++); + button_mapped = true; + } + } + input->keycode = f3a->gpio_key_map; + input->keycodesize = sizeof(f3a->gpio_key_map[0]); + input->keycodemax = f3a->gpio_count; + + if (pdata->gpio_data.buttonpad || (button - BTN_LEFT == 1)) + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); + + return 0; +} + +static int rmi_f3a_initialize(struct rmi_function *fn, struct f3a_data *f3a) +{ + u8 query1[RMI_F3A_MAX_REG_SIZE]; + u8 ctrl1[RMI_F3A_MAX_REG_SIZE]; + u8 buf; + int error; + + error = rmi_read(fn->rmi_dev, fn->fd.query_base_addr, &buf); + if (error < 0) { + dev_err(&fn->dev, "Failed to read general info register: %d\n", + error); + return -ENODEV; + } + + f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT; + f3a->register_count = DIV_ROUND_UP(f3a->gpio_count, 8); + + /* Query1 -> gpio exist */ + error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr + 1, + query1, f3a->register_count); + if (error) { + dev_err(&fn->dev, "Failed to read query1 register\n"); + return error; + } + + /* Ctrl1 -> gpio direction */ + error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr + 1, + ctrl1, f3a->register_count); + if (error) { + dev_err(&fn->dev, "Failed to read control1 register\n"); + return error; + } + + error = rmi_f3a_map_gpios(fn, f3a, query1, ctrl1); + if (error) + return error; + + return 0; +} + +static int rmi_f3a_probe(struct rmi_function *fn) +{ + struct rmi_device *rmi_dev = fn->rmi_dev; + struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev); + struct f3a_data *f3a; + int error; + + if (!drv_data->input) { + dev_info(&fn->dev, "F3A: no input device found, ignoring\n"); + return -ENXIO; + } + + f3a = devm_kzalloc(&fn->dev, sizeof(*f3a), GFP_KERNEL); + if (!f3a) + return -ENOMEM; + + f3a->input = drv_data->input; + + error = rmi_f3a_initialize(fn, f3a); + if (error) + return error; + + dev_set_drvdata(&fn->dev, f3a); + return 0; +} + +struct rmi_function_handler rmi_f3a_handler = { + .driver = { + .name = "rmi4_f3a", + }, + .func = 0x3a, + .probe = rmi_f3a_probe, + .config = rmi_f3a_config, + .attention = rmi_f3a_attention, +}; diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c index a681a2c04e39..f15ed3dcdb9b 100644 --- a/drivers/input/serio/sun4i-ps2.c +++ b/drivers/input/serio/sun4i-ps2.c @@ -211,7 +211,6 @@ static int sun4i_ps2_probe(struct platform_device *pdev) struct sun4i_ps2data *drvdata; struct serio *serio; struct device *dev = &pdev->dev; - unsigned int irq; int error; drvdata = kzalloc(sizeof(struct sun4i_ps2data), GFP_KERNEL); @@ -264,14 +263,12 @@ static int sun4i_ps2_probe(struct platform_device *pdev) writel(0, drvdata->reg_base + PS2_REG_GCTL); /* Get IRQ for the device */ - irq = platform_get_irq(pdev, 0); - if (!irq) { - dev_err(dev, "no IRQ found\n"); - error = -ENXIO; + drvdata->irq = platform_get_irq(pdev, 0); + if (drvdata->irq < 0) { + error = drvdata->irq; goto err_disable_clk; } - drvdata->irq = irq; drvdata->serio = serio; drvdata->dev = dev; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 35c867b2d9a7..f012fe746df0 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -1322,4 +1322,16 @@ config TOUCHSCREEN_IQS5XX To compile this driver as a module, choose M here: the module will be called iqs5xx. +config TOUCHSCREEN_ZINITIX + tristate "Zinitix touchscreen support" + depends on I2C + help + Say Y here if you have a touchscreen using Zinitix bt541, + or something similar enough. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called zinitix. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 30d1e1b42492..6233541e9173 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -111,3 +111,4 @@ obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o +obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index b0bd5bb079be..50c348297e38 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -90,7 +90,7 @@ /* FW read command, 0x53 0x?? 0x0, 0x01 */ #define E_ELAN_INFO_FW_VER 0x00 #define E_ELAN_INFO_BC_VER 0x10 -#define E_ELAN_INFO_REK 0xE0 +#define E_ELAN_INFO_REK 0xD0 #define E_ELAN_INFO_TEST_VER 0xE0 #define E_ELAN_INFO_FW_ID 0xF0 #define E_INFO_OSR 0xD6 @@ -134,6 +134,7 @@ struct elants_data { u8 bc_version; u8 iap_version; u16 hw_version; + u8 major_res; unsigned int x_res; /* resolution in units/mm */ unsigned int y_res; unsigned int x_max; @@ -459,6 +460,9 @@ static int elants_i2c_query_ts_info(struct elants_data *ts) rows = resp[2] + resp[6] + resp[10]; cols = resp[3] + resp[7] + resp[11]; + /* Get report resolution value of ABS_MT_TOUCH_MAJOR */ + ts->major_res = resp[16]; + /* Process mm_to_pixel information */ error = elants_i2c_execute_command(client, get_osr_cmd, sizeof(get_osr_cmd), @@ -1325,6 +1329,8 @@ static int elants_i2c_probe(struct i2c_client *client, 0, MT_TOOL_PALM, 0, 0); input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); + if (ts->major_res > 0) + input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res); touchscreen_parse_properties(ts->input, true, &ts->prop); diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c index 9ed258854349..cd369f9ac5e6 100644 --- a/drivers/input/touchscreen/imx6ul_tsc.c +++ b/drivers/input/touchscreen/imx6ul_tsc.c @@ -315,9 +315,8 @@ static irqreturn_t adc_irq_fn(int irq, void *dev_id) return IRQ_HANDLED; } -static int imx6ul_tsc_open(struct input_dev *input_dev) +static int imx6ul_tsc_start(struct imx6ul_tsc *tsc) { - struct imx6ul_tsc *tsc = input_get_drvdata(input_dev); int err; err = clk_prepare_enable(tsc->adc_clk); @@ -349,16 +348,29 @@ disable_adc_clk: return err; } -static void imx6ul_tsc_close(struct input_dev *input_dev) +static void imx6ul_tsc_stop(struct imx6ul_tsc *tsc) { - struct imx6ul_tsc *tsc = input_get_drvdata(input_dev); - imx6ul_tsc_disable(tsc); clk_disable_unprepare(tsc->tsc_clk); clk_disable_unprepare(tsc->adc_clk); } + +static int imx6ul_tsc_open(struct input_dev *input_dev) +{ + struct imx6ul_tsc *tsc = input_get_drvdata(input_dev); + + return imx6ul_tsc_start(tsc); +} + +static void imx6ul_tsc_close(struct input_dev *input_dev) +{ + struct imx6ul_tsc *tsc = input_get_drvdata(input_dev); + + imx6ul_tsc_stop(tsc); +} + static int imx6ul_tsc_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -509,12 +521,8 @@ static int __maybe_unused imx6ul_tsc_suspend(struct device *dev) mutex_lock(&input_dev->mutex); - if (input_dev->users) { - imx6ul_tsc_disable(tsc); - - clk_disable_unprepare(tsc->tsc_clk); - clk_disable_unprepare(tsc->adc_clk); - } + if (input_dev->users) + imx6ul_tsc_stop(tsc); mutex_unlock(&input_dev->mutex); @@ -530,22 +538,11 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev) mutex_lock(&input_dev->mutex); - if (input_dev->users) { - retval = clk_prepare_enable(tsc->adc_clk); - if (retval) - goto out; - - retval = clk_prepare_enable(tsc->tsc_clk); - if (retval) { - clk_disable_unprepare(tsc->adc_clk); - goto out; - } - - retval = imx6ul_tsc_init(tsc); - } + if (input_dev->users) + retval = imx6ul_tsc_start(tsc); -out: mutex_unlock(&input_dev->mutex); + return retval; } diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c index fe245439adee..e694a9b2b1e5 100644 --- a/drivers/input/touchscreen/raydium_i2c_ts.c +++ b/drivers/input/touchscreen/raydium_i2c_ts.c @@ -51,6 +51,7 @@ /* Touch relative info */ #define RM_MAX_RETRIES 3 +#define RM_RETRY_DELAY_MS 20 #define RM_MAX_TOUCH_NUM 10 #define RM_BOOT_DELAY_MS 100 @@ -136,83 +137,82 @@ struct raydium_data { bool wake_irq_enabled; }; -static int raydium_i2c_send(struct i2c_client *client, - u8 addr, const void *data, size_t len) +static int raydium_i2c_xfer(struct i2c_client *client, + u32 addr, void *data, size_t len, bool is_read) { - u8 *buf; - int tries = 0; - int ret; - - buf = kmalloc(len + 1, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - buf[0] = addr; - memcpy(buf + 1, data, len); - - do { - ret = i2c_master_send(client, buf, len + 1); - if (likely(ret == len + 1)) - break; - - msleep(20); - } while (++tries < RM_MAX_RETRIES); - - kfree(buf); - - if (unlikely(ret != len + 1)) { - if (ret >= 0) - ret = -EIO; - dev_err(&client->dev, "%s failed: %d\n", __func__, ret); - return ret; - } + struct raydium_bank_switch_header { + u8 cmd; + __be32 be_addr; + } __packed header = { + .cmd = RM_CMD_BANK_SWITCH, + .be_addr = cpu_to_be32(addr), + }; - return 0; -} + u8 reg_addr = addr & 0xff; -static int raydium_i2c_read(struct i2c_client *client, - u8 addr, void *data, size_t len) -{ struct i2c_msg xfer[] = { { .addr = client->addr, + .len = sizeof(header), + .buf = (u8 *)&header, + }, + { + .addr = client->addr, .len = 1, - .buf = &addr, + .buf = ®_addr, }, { .addr = client->addr, - .flags = I2C_M_RD, .len = len, .buf = data, + .flags = is_read ? I2C_M_RD : 0, } }; + + /* + * If address is greater than 255, then RM_CMD_BANK_SWITCH needs to be + * sent first. Else, skip the header i.e. xfer[0]. + */ + int xfer_start_idx = (addr > 0xff) ? 0 : 1; + size_t xfer_count = ARRAY_SIZE(xfer) - xfer_start_idx; int ret; - ret = i2c_transfer(client->adapter, xfer, ARRAY_SIZE(xfer)); - if (unlikely(ret != ARRAY_SIZE(xfer))) - return ret < 0 ? ret : -EIO; + ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count); + if (likely(ret == xfer_count)) + return 0; + + return ret < 0 ? ret : -EIO; +} - return 0; +static int raydium_i2c_send(struct i2c_client *client, + u32 addr, const void *data, size_t len) +{ + int tries = 0; + int error; + + do { + error = raydium_i2c_xfer(client, addr, (void *)data, len, + false); + if (likely(!error)) + return 0; + + msleep(RM_RETRY_DELAY_MS); + } while (++tries < RM_MAX_RETRIES); + + dev_err(&client->dev, "%s failed: %d\n", __func__, error); + return error; } -static int raydium_i2c_read_message(struct i2c_client *client, - u32 addr, void *data, size_t len) +static int raydium_i2c_read(struct i2c_client *client, + u32 addr, void *data, size_t len) { - __be32 be_addr; size_t xfer_len; int error; while (len) { xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE); - - be_addr = cpu_to_be32(addr); - - error = raydium_i2c_send(client, RM_CMD_BANK_SWITCH, - &be_addr, sizeof(be_addr)); - if (!error) - error = raydium_i2c_read(client, addr & 0xff, - data, xfer_len); - if (error) + error = raydium_i2c_xfer(client, addr, data, xfer_len, true); + if (unlikely(error)) return error; len -= xfer_len; @@ -223,27 +223,13 @@ static int raydium_i2c_read_message(struct i2c_client *client, return 0; } -static int raydium_i2c_send_message(struct i2c_client *client, - u32 addr, const void *data, size_t len) -{ - __be32 be_addr = cpu_to_be32(addr); - int error; - - error = raydium_i2c_send(client, RM_CMD_BANK_SWITCH, - &be_addr, sizeof(be_addr)); - if (!error) - error = raydium_i2c_send(client, addr & 0xff, data, len); - - return error; -} - static int raydium_i2c_sw_reset(struct i2c_client *client) { const u8 soft_rst_cmd = 0x01; int error; - error = raydium_i2c_send_message(client, RM_RESET_MSG_ADDR, - &soft_rst_cmd, sizeof(soft_rst_cmd)); + error = raydium_i2c_send(client, RM_RESET_MSG_ADDR, &soft_rst_cmd, + sizeof(soft_rst_cmd)); if (error) { dev_err(&client->dev, "software reset failed: %d\n", error); return error; @@ -295,9 +281,8 @@ static int raydium_i2c_query_ts_info(struct raydium_data *ts) if (error) continue; - error = raydium_i2c_read_message(client, - le32_to_cpu(query_bank_addr), - &ts->info, sizeof(ts->info)); + error = raydium_i2c_read(client, le32_to_cpu(query_bank_addr), + &ts->info, sizeof(ts->info)); if (error) continue; @@ -834,8 +819,8 @@ static irqreturn_t raydium_i2c_irq(int irq, void *_dev) if (ts->boot_mode != RAYDIUM_TS_MAIN) goto out; - error = raydium_i2c_read_message(ts->client, ts->data_bank_addr, - ts->report_data, ts->pkg_size); + error = raydium_i2c_read(ts->client, ts->data_bank_addr, + ts->report_data, ts->pkg_size); if (error) goto out; diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c index df946869d4cd..9a64e1dbc04a 100644 --- a/drivers/input/touchscreen/stmfts.c +++ b/drivers/input/touchscreen/stmfts.c @@ -479,7 +479,7 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev, mutex_lock(&sdata->mutex); - if (value & sdata->hover_enabled) + if (value && sdata->hover_enabled) goto out; if (sdata->running) diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c new file mode 100644 index 000000000000..1acc2eb2bcb3 --- /dev/null +++ b/drivers/input/touchscreen/zinitix.c @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +/* Register Map */ + +#define BT541_SWRESET_CMD 0x0000 +#define BT541_WAKEUP_CMD 0x0001 + +#define BT541_IDLE_CMD 0x0004 +#define BT541_SLEEP_CMD 0x0005 + +#define BT541_CLEAR_INT_STATUS_CMD 0x0003 +#define BT541_CALIBRATE_CMD 0x0006 +#define BT541_SAVE_STATUS_CMD 0x0007 +#define BT541_SAVE_CALIBRATION_CMD 0x0008 +#define BT541_RECALL_FACTORY_CMD 0x000f + +#define BT541_THRESHOLD 0x0020 + +#define BT541_LARGE_PALM_REJECT_AREA_TH 0x003F + +#define BT541_DEBUG_REG 0x0115 /* 0~7 */ + +#define BT541_TOUCH_MODE 0x0010 +#define BT541_CHIP_REVISION 0x0011 +#define BT541_FIRMWARE_VERSION 0x0012 + +#define ZINITIX_USB_DETECT 0x116 + +#define BT541_MINOR_FW_VERSION 0x0121 + +#define BT541_VENDOR_ID 0x001C +#define BT541_HW_ID 0x0014 + +#define BT541_DATA_VERSION_REG 0x0013 +#define BT541_SUPPORTED_FINGER_NUM 0x0015 +#define BT541_EEPROM_INFO 0x0018 +#define BT541_INITIAL_TOUCH_MODE 0x0019 + +#define BT541_TOTAL_NUMBER_OF_X 0x0060 +#define BT541_TOTAL_NUMBER_OF_Y 0x0061 + +#define BT541_DELAY_RAW_FOR_HOST 0x007f + +#define BT541_BUTTON_SUPPORTED_NUM 0x00B0 +#define BT541_BUTTON_SENSITIVITY 0x00B2 +#define BT541_DUMMY_BUTTON_SENSITIVITY 0X00C8 + +#define BT541_X_RESOLUTION 0x00C0 +#define BT541_Y_RESOLUTION 0x00C1 + +#define BT541_POINT_STATUS_REG 0x0080 +#define BT541_ICON_STATUS_REG 0x00AA + +#define BT541_POINT_COORD_REG (BT541_POINT_STATUS_REG + 2) + +#define BT541_AFE_FREQUENCY 0x0100 +#define BT541_DND_N_COUNT 0x0122 +#define BT541_DND_U_COUNT 0x0135 + +#define BT541_RAWDATA_REG 0x0200 + +#define BT541_EEPROM_INFO_REG 0x0018 + +#define BT541_INT_ENABLE_FLAG 0x00f0 +#define BT541_PERIODICAL_INTERRUPT_INTERVAL 0x00f1 + +#define BT541_BTN_WIDTH 0x016d + +#define BT541_CHECKSUM_RESULT 0x012c + +#define BT541_INIT_FLASH 0x01d0 +#define BT541_WRITE_FLASH 0x01d1 +#define BT541_READ_FLASH 0x01d2 + +#define ZINITIX_INTERNAL_FLAG_02 0x011e +#define ZINITIX_INTERNAL_FLAG_03 0x011f + +#define ZINITIX_I2C_CHECKSUM_WCNT 0x016a +#define ZINITIX_I2C_CHECKSUM_RESULT 0x016c + +/* Interrupt & status register flags */ + +#define BIT_PT_CNT_CHANGE BIT(0) +#define BIT_DOWN BIT(1) +#define BIT_MOVE BIT(2) +#define BIT_UP BIT(3) +#define BIT_PALM BIT(4) +#define BIT_PALM_REJECT BIT(5) +#define BIT_RESERVED_0 BIT(6) +#define BIT_RESERVED_1 BIT(7) +#define BIT_WEIGHT_CHANGE BIT(8) +#define BIT_PT_NO_CHANGE BIT(9) +#define BIT_REJECT BIT(10) +#define BIT_PT_EXIST BIT(11) +#define BIT_RESERVED_2 BIT(12) +#define BIT_ERROR BIT(13) +#define BIT_DEBUG BIT(14) +#define BIT_ICON_EVENT BIT(15) + +#define SUB_BIT_EXIST BIT(0) +#define SUB_BIT_DOWN BIT(1) +#define SUB_BIT_MOVE BIT(2) +#define SUB_BIT_UP BIT(3) +#define SUB_BIT_UPDATE BIT(4) +#define SUB_BIT_WAIT BIT(5) + +#define DEFAULT_TOUCH_POINT_MODE 2 +#define MAX_SUPPORTED_FINGER_NUM 5 + +#define CHIP_ON_DELAY 15 // ms +#define FIRMWARE_ON_DELAY 40 // ms + +struct point_coord { + __le16 x; + __le16 y; + u8 width; + u8 sub_status; + // currently unused, but needed as padding: + u8 minor_width; + u8 angle; +}; + +struct touch_event { + __le16 status; + u8 finger_cnt; + u8 time_stamp; + struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM]; +}; + +struct bt541_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct touchscreen_properties prop; + struct regulator_bulk_data supplies[2]; + u32 zinitix_mode; +}; + +static int zinitix_read_data(struct i2c_client *client, + u16 reg, void *values, size_t length) +{ + __le16 reg_le = cpu_to_le16(reg); + int ret; + + /* A single i2c_transfer() transaction does not work here. */ + ret = i2c_master_send(client, (u8 *)®_le, sizeof(reg_le)); + if (ret != sizeof(reg_le)) + return ret < 0 ? ret : -EIO; + + ret = i2c_master_recv(client, (u8 *)values, length); + if (ret != length) + return ret < 0 ? ret : -EIO; ; + + return 0; +} + +static int zinitix_write_u16(struct i2c_client *client, u16 reg, u16 value) +{ + __le16 packet[2] = {cpu_to_le16(reg), cpu_to_le16(value)}; + int ret; + + ret = i2c_master_send(client, (u8 *)packet, sizeof(packet)); + if (ret != sizeof(packet)) + return ret < 0 ? ret : -EIO; + + return 0; +} + +static int zinitix_write_cmd(struct i2c_client *client, u16 reg) +{ + __le16 reg_le = cpu_to_le16(reg); + int ret; + + ret = i2c_master_send(client, (u8 *)®_le, sizeof(reg_le)); + if (ret != sizeof(reg_le)) + return ret < 0 ? ret : -EIO; + + return 0; +} + +static bool zinitix_init_touch(struct bt541_ts_data *bt541) +{ + struct i2c_client *client = bt541->client; + int i; + int error; + + error = zinitix_write_cmd(client, BT541_SWRESET_CMD); + if (error) { + dev_err(&client->dev, "Failed to write reset command\n"); + return error; + } + + error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0); + if (error) { + dev_err(&client->dev, + "Failed to reset interrupt enable flag\n"); + return error; + } + + /* initialize */ + error = zinitix_write_u16(client, BT541_X_RESOLUTION, + bt541->prop.max_x); + if (error) + return error; + + error = zinitix_write_u16(client, BT541_Y_RESOLUTION, + bt541->prop.max_y); + if (error) + return error; + + error = zinitix_write_u16(client, BT541_SUPPORTED_FINGER_NUM, + MAX_SUPPORTED_FINGER_NUM); + if (error) + return error; + + error = zinitix_write_u16(client, BT541_INITIAL_TOUCH_MODE, + bt541->zinitix_mode); + if (error) + return error; + + error = zinitix_write_u16(client, BT541_TOUCH_MODE, + bt541->zinitix_mode); + if (error) + return error; + + error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, + BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE | + BIT_UP); + if (error) + return error; + + /* clear queue */ + for (i = 0; i < 10; i++) { + zinitix_write_cmd(client, BT541_CLEAR_INT_STATUS_CMD); + udelay(10); + } + + return 0; +} + +static int zinitix_init_regulators(struct bt541_ts_data *bt541) +{ + struct i2c_client *client = bt541->client; + int error; + + bt541->supplies[0].supply = "vdd"; + bt541->supplies[1].supply = "vddo"; + error = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(bt541->supplies), + bt541->supplies); + if (error < 0) { + dev_err(&client->dev, "Failed to get regulators: %d\n", error); + return error; + } + + return 0; +} + +static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541) +{ + int error; + struct i2c_client *client = bt541->client; + + error = zinitix_write_u16(client, 0xc000, 0x0001); + if (error) { + dev_err(&client->dev, + "Failed to send power sequence(vendor cmd enable)\n"); + return error; + } + udelay(10); + + error = zinitix_write_cmd(client, 0xc004); + if (error) { + dev_err(&client->dev, + "Failed to send power sequence (intn clear)\n"); + return error; + } + udelay(10); + + error = zinitix_write_u16(client, 0xc002, 0x0001); + if (error) { + dev_err(&client->dev, + "Failed to send power sequence (nvm init)\n"); + return error; + } + mdelay(2); + + error = zinitix_write_u16(client, 0xc001, 0x0001); + if (error) { + dev_err(&client->dev, + "Failed to send power sequence (program start)\n"); + return error; + } + msleep(FIRMWARE_ON_DELAY); + + return 0; +} + +static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot, + const struct point_coord *p) +{ + input_mt_slot(bt541->input_dev, slot); + input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true); + touchscreen_report_pos(bt541->input_dev, &bt541->prop, + le16_to_cpu(p->x), le16_to_cpu(p->y), true); + input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, p->width); +} + +static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) +{ + struct bt541_ts_data *bt541 = bt541_handler; + struct i2c_client *client = bt541->client; + struct touch_event touch_event; + int error; + int i; + + memset(&touch_event, 0, sizeof(struct touch_event)); + + error = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG, + &touch_event, sizeof(struct touch_event)); + if (error) { + dev_err(&client->dev, "Failed to read in touchpoint struct\n"); + goto out; + } + + for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) + if (touch_event.point_coord[i].sub_status & SUB_BIT_EXIST) + zinitix_report_finger(bt541, i, + &touch_event.point_coord[i]); + + input_mt_sync_frame(bt541->input_dev); + input_sync(bt541->input_dev); + +out: + zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD); + return IRQ_HANDLED; +} + +static int zinitix_start(struct bt541_ts_data *bt541) +{ + int error; + + error = regulator_bulk_enable(ARRAY_SIZE(bt541->supplies), + bt541->supplies); + if (error) { + dev_err(&bt541->client->dev, + "Failed to enable regulators: %d\n", error); + return error; + } + + msleep(CHIP_ON_DELAY); + + error = zinitix_send_power_on_sequence(bt541); + if (error) { + dev_err(&bt541->client->dev, + "Error while sending power-on sequence: %d\n", error); + return error; + } + + error = zinitix_init_touch(bt541); + if (error) { + dev_err(&bt541->client->dev, + "Error while configuring touch IC\n"); + return error; + } + + enable_irq(bt541->client->irq); + + return 0; +} + +static int zinitix_stop(struct bt541_ts_data *bt541) +{ + int error; + + disable_irq(bt541->client->irq); + + error = regulator_bulk_disable(ARRAY_SIZE(bt541->supplies), + bt541->supplies); + if (error) { + dev_err(&bt541->client->dev, + "Failed to disable regulators: %d\n", error); + return error; + } + + return 0; +} + +static int zinitix_input_open(struct input_dev *dev) +{ + struct bt541_ts_data *bt541 = input_get_drvdata(dev); + + return zinitix_start(bt541); +} + +static void zinitix_input_close(struct input_dev *dev) +{ + struct bt541_ts_data *bt541 = input_get_drvdata(dev); + + zinitix_stop(bt541); +} + +static int zinitix_init_input_dev(struct bt541_ts_data *bt541) +{ + struct input_dev *input_dev; + int error; + + input_dev = devm_input_allocate_device(&bt541->client->dev); + if (!input_dev) { + dev_err(&bt541->client->dev, + "Failed to allocate input device."); + return -ENOMEM; + } + + input_set_drvdata(input_dev, bt541); + bt541->input_dev = input_dev; + + input_dev->name = "Zinitix Capacitive TouchScreen"; + input_dev->phys = "input/ts"; + input_dev->id.bustype = BUS_I2C; + input_dev->open = zinitix_input_open; + input_dev->close = zinitix_input_close; + + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + + touchscreen_parse_properties(input_dev, true, &bt541->prop); + if (!bt541->prop.max_x || !bt541->prop.max_y) { + dev_err(&bt541->client->dev, + "Touchscreen-size-x and/or touchscreen-size-y not set in dts\n"); + return -EINVAL; + } + + error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(&bt541->client->dev, + "Failed to initialize MT slots: %d", error); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&bt541->client->dev, + "Failed to register input device: %d", error); + return error; + } + + return 0; +} + +static int zinitix_ts_probe(struct i2c_client *client) +{ + struct bt541_ts_data *bt541; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, + "Failed to assert adapter's support for plain I2C.\n"); + return -ENXIO; + } + + bt541 = devm_kzalloc(&client->dev, sizeof(*bt541), GFP_KERNEL); + if (!bt541) + return -ENOMEM; + + bt541->client = client; + i2c_set_clientdata(client, bt541); + + error = zinitix_init_regulators(bt541); + if (error) { + dev_err(&client->dev, + "Failed to initialize regulators: %d\n", error); + return error; + } + + error = zinitix_init_input_dev(bt541); + if (error) { + dev_err(&client->dev, + "Failed to initialize input device: %d\n", error); + return error; + } + + error = device_property_read_u32(&client->dev, "zinitix,mode", + &bt541->zinitix_mode); + if (error < 0) { + /* fall back to mode 2 */ + bt541->zinitix_mode = DEFAULT_TOUCH_POINT_MODE; + } + + if (bt541->zinitix_mode != 2) { + /* + * If there are devices that don't support mode 2, support + * for other modes (0, 1) will be needed. + */ + dev_err(&client->dev, + "Malformed zinitix,mode property, must be 2 (supplied: %d)\n", + bt541->zinitix_mode); + return -EINVAL; + } + + irq_set_status_flags(client->irq, IRQ_NOAUTOEN); + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, zinitix_ts_irq_handler, + IRQF_ONESHOT, client->name, bt541); + if (error) { + dev_err(&client->dev, "Failed to request IRQ: %d\n", error); + return error; + } + + return 0; +} + +static int __maybe_unused zinitix_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bt541_ts_data *bt541 = i2c_get_clientdata(client); + + mutex_lock(&bt541->input_dev->mutex); + + if (bt541->input_dev->users) + zinitix_stop(bt541); + + mutex_unlock(&bt541->input_dev->mutex); + + return 0; +} + +static int __maybe_unused zinitix_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bt541_ts_data *bt541 = i2c_get_clientdata(client); + int ret = 0; + + mutex_lock(&bt541->input_dev->mutex); + + if (bt541->input_dev->users) + ret = zinitix_start(bt541); + + mutex_unlock(&bt541->input_dev->mutex); + + return ret; +} + +static SIMPLE_DEV_PM_OPS(zinitix_pm_ops, zinitix_suspend, zinitix_resume); + +#ifdef CONFIG_OF +static const struct of_device_id zinitix_of_match[] = { + { .compatible = "zinitix,bt541" }, + { } +}; +MODULE_DEVICE_TABLE(of, zinitix_of_match); +#endif + +static struct i2c_driver zinitix_ts_driver = { + .probe_new = zinitix_ts_probe, + .driver = { + .name = "Zinitix-TS", + .pm = &zinitix_pm_ops, + .of_match_table = of_match_ptr(zinitix_of_match), + }, +}; +module_i2c_driver(zinitix_ts_driver); + +MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>"); +MODULE_DESCRIPTION("Zinitix touchscreen driver"); +MODULE_LICENSE("GPL v2"); |