diff options
author | Barry Song <song.bao.hua@hisilicon.com> | 2020-08-27 21:29:57 +1200 |
---|---|---|
committer | Will Deacon <will@kernel.org> | 2020-09-07 14:17:17 +0100 |
commit | bd07a20a38b6598dc09f5543eb03710e807cb429 (patch) | |
tree | 3dbea0cc5e4f86212b4d7bd443029491d88af53f /drivers/iommu | |
parent | 9305d02adcc14adc0f4e7d5ad0c370174923e6dc (diff) | |
download | linux-bd07a20a38b6598dc09f5543eb03710e807cb429.tar.gz linux-bd07a20a38b6598dc09f5543eb03710e807cb429.tar.bz2 linux-bd07a20a38b6598dc09f5543eb03710e807cb429.zip |
iommu/arm-smmu-v3: permit users to disable msi polling
Polling by MSI isn't necessarily faster than polling by SEV. Tests on
hi1620 show hns3 100G NIC network throughput can improve from 25G to
27G if we disable MSI polling while running 16 netperf threads sending
UDP packets in size 32KB. TX throughput can improve from 7G to 7.7G for
single thread.
The reason for the throughput improvement is that the latency to poll
the completion of CMD_SYNC becomes smaller. After sending a CMD_SYNC
in an empty cmd queue, typically we need to wait for 280ns using MSI
polling. But we only need around 190ns after disabling MSI polling.
This patch provides a command line option so that users can decide to
use MSI polling or not based on their tests.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200827092957.22500-4-song.bao.hua@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Diffstat (limited to 'drivers/iommu')
-rw-r--r-- | drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 17 |
1 files changed, 12 insertions, 5 deletions
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index c9805ab296c4..ebb3885e9035 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -418,6 +418,11 @@ module_param(disable_bypass, bool, 0444); MODULE_PARM_DESC(disable_bypass, "Disable bypass streams such that incoming transactions from devices that are not attached to an iommu domain will report an abort back to the device and will not be allowed to pass through the SMMU."); +static bool disable_msipolling; +module_param(disable_msipolling, bool, 0444); +MODULE_PARM_DESC(disable_msipolling, + "Disable MSI-based polling for CMD_SYNC completion."); + enum pri_resp { PRI_RESP_DENY = 0, PRI_RESP_FAIL = 1, @@ -652,6 +657,7 @@ struct arm_smmu_device { #define ARM_SMMU_OPT_SKIP_PREFETCH (1 << 0) #define ARM_SMMU_OPT_PAGE0_REGS_ONLY (1 << 1) +#define ARM_SMMU_OPT_MSIPOLL (1 << 2) u32 options; struct arm_smmu_cmdq cmdq; @@ -992,8 +998,7 @@ static void arm_smmu_cmdq_build_sync_cmd(u64 *cmd, struct arm_smmu_device *smmu, * Beware that Hi16xx adds an extra 32 bits of goodness to its MSI * payload, so the write will zero the entire command on that platform. */ - if (smmu->features & ARM_SMMU_FEAT_MSI && - smmu->features & ARM_SMMU_FEAT_COHERENCY) { + if (smmu->options & ARM_SMMU_OPT_MSIPOLL) { ent.sync.msiaddr = q->base_dma + Q_IDX(&q->llq, prod) * q->ent_dwords * 8; } @@ -1331,8 +1336,7 @@ static int __arm_smmu_cmdq_poll_until_consumed(struct arm_smmu_device *smmu, static int arm_smmu_cmdq_poll_until_sync(struct arm_smmu_device *smmu, struct arm_smmu_ll_queue *llq) { - if (smmu->features & ARM_SMMU_FEAT_MSI && - smmu->features & ARM_SMMU_FEAT_COHERENCY) + if (smmu->options & ARM_SMMU_OPT_MSIPOLL) return __arm_smmu_cmdq_poll_until_msi(smmu, llq); return __arm_smmu_cmdq_poll_until_consumed(smmu, llq); @@ -3740,8 +3744,11 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu) if (reg & IDR0_SEV) smmu->features |= ARM_SMMU_FEAT_SEV; - if (reg & IDR0_MSI) + if (reg & IDR0_MSI) { smmu->features |= ARM_SMMU_FEAT_MSI; + if (coherent && !disable_msipolling) + smmu->options |= ARM_SMMU_OPT_MSIPOLL; + } if (reg & IDR0_HYP) smmu->features |= ARM_SMMU_FEAT_HYP; |