diff options
author | Matthias Schwarzott <zzam@gentoo.org> | 2014-07-22 17:12:12 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <m.chehab@samsung.com> | 2014-07-27 17:01:41 -0300 |
commit | 3e54a1697ace99d1ad602ec268abf117ace1412f (patch) | |
tree | 86afb2e3aa37a0cded48484eedf6c83fe3454beb /drivers/media | |
parent | 9ca72fa1f854a596092901f3e0ee90bb3d459ed5 (diff) | |
download | linux-3e54a1697ace99d1ad602ec268abf117ace1412f.tar.gz linux-3e54a1697ace99d1ad602ec268abf117ace1412f.tar.bz2 linux-3e54a1697ace99d1ad602ec268abf117ace1412f.zip |
[media] si2165: Add demod driver for DVB-T only
DVB-T was tested with 8MHz BW channels in germany
This driver is the simplest possible, it uses automatic mode for all
parameters (TPS).
Added spectrum inversion support.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/dvb-frontends/Kconfig | 9 | ||||
-rw-r--r-- | drivers/media/dvb-frontends/Makefile | 1 | ||||
-rw-r--r-- | drivers/media/dvb-frontends/si2165.c | 1040 | ||||
-rw-r--r-- | drivers/media/dvb-frontends/si2165.h | 64 | ||||
-rw-r--r-- | drivers/media/dvb-frontends/si2165_priv.h | 23 |
5 files changed, 1137 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 5b8b04c9f211..fe0ddcca192c 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -63,6 +63,15 @@ config DVB_TDA18271C2DD Say Y when you want to support this tuner. +config DVB_SI2165 + tristate "Silicon Labs si2165 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C/T demodulator. + + Say Y when you want to support this frontend. + comment "DVB-S (satellite) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile index 655e3c8ac173..edf103d45920 100644 --- a/drivers/media/dvb-frontends/Makefile +++ b/drivers/media/dvb-frontends/Makefile @@ -105,6 +105,7 @@ obj-$(CONFIG_DVB_STV0367) += stv0367.o obj-$(CONFIG_DVB_CXD2820R) += cxd2820r.o obj-$(CONFIG_DVB_DRXK) += drxk.o obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o +obj-$(CONFIG_DVB_SI2165) += si2165.o obj-$(CONFIG_DVB_A8293) += a8293.o obj-$(CONFIG_DVB_TDA10071) += tda10071.o obj-$(CONFIG_DVB_RTL2830) += rtl2830.o diff --git a/drivers/media/dvb-frontends/si2165.c b/drivers/media/dvb-frontends/si2165.c new file mode 100644 index 000000000000..3a2d6c5aded6 --- /dev/null +++ b/drivers/media/dvb-frontends/si2165.c @@ -0,0 +1,1040 @@ +/* + Driver for Silicon Labs SI2165 DVB-C/-T Demodulator + + Copyright (C) 2013-2014 Matthias Schwarzott <zzam@gentoo.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + References: + http://www.silabs.com/Support%20Documents/TechnicalDocs/Si2165-short.pdf +*/ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/firmware.h> + +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "si2165_priv.h" +#include "si2165.h" + +/* Hauppauge WinTV-HVR-930C-HD B130 / PCTV QuatroStick 521e 1113xx + * uses 16 MHz xtal */ + +/* Hauppauge WinTV-HVR-930C-HD B131 / PCTV QuatroStick 522e 1114xx + * uses 24 MHz clock provided by tuner */ + +struct si2165_state { + struct i2c_adapter *i2c; + + struct dvb_frontend frontend; + + struct si2165_config config; + + /* chip revision */ + u8 revcode; + /* chip type */ + u8 chip_type; + + /* calculated by xtal and div settings */ + u32 fvco_hz; + u32 sys_clk; + u32 adc_clk; + + bool has_dvbc; + bool has_dvbt; + bool firmware_loaded; +}; + +#define DEBUG_OTHER 0x01 +#define DEBUG_I2C_WRITE 0x02 +#define DEBUG_I2C_READ 0x04 +#define DEBUG_REG_READ 0x08 +#define DEBUG_REG_WRITE 0x10 +#define DEBUG_FW_LOAD 0x20 + +static int debug = 0x00; + +#define dprintk(args...) \ + do { \ + if (debug & DEBUG_OTHER) \ + printk(KERN_DEBUG "si2165: " args); \ + } while (0) + +#define deb_i2c_write(args...) \ + do { \ + if (debug & DEBUG_I2C_WRITE) \ + printk(KERN_DEBUG "si2165: i2c write: " args); \ + } while (0) + +#define deb_i2c_read(args...) \ + do { \ + if (debug & DEBUG_I2C_READ) \ + printk(KERN_DEBUG "si2165: i2c read: " args); \ + } while (0) + +#define deb_readreg(args...) \ + do { \ + if (debug & DEBUG_REG_READ) \ + printk(KERN_DEBUG "si2165: reg read: " args); \ + } while (0) + +#define deb_writereg(args...) \ + do { \ + if (debug & DEBUG_REG_WRITE) \ + printk(KERN_DEBUG "si2165: reg write: " args); \ + } while (0) + +#define deb_fw_load(args...) \ + do { \ + if (debug & DEBUG_FW_LOAD) \ + printk(KERN_DEBUG "si2165: fw load: " args); \ + } while (0) + +static int si2165_write(struct si2165_state *state, const u16 reg, + const u8 *src, const int count) +{ + int ret; + struct i2c_msg msg; + u8 buf[2 + 4]; /* write a maximum of 4 bytes of data */ + + if (count + 2 > sizeof(buf)) { + dev_warn(&state->i2c->dev, + "%s: i2c wr reg=%04x: count=%d is too big!\n", + KBUILD_MODNAME, reg, count); + return -EINVAL; + } + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + memcpy(buf + 2, src, count); + + msg.addr = state->config.i2c_addr; + msg.flags = 0; + msg.buf = buf; + msg.len = count + 2; + + if (debug & DEBUG_I2C_WRITE) + deb_i2c_write("reg: 0x%04x, data: %*ph\n", reg, count, src); + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) { + dev_err(&state->i2c->dev, "%s: ret == %d\n", __func__, ret); + if (ret < 0) + return ret; + else + return -EREMOTEIO; + } + + return 0; +} + +static int si2165_read(struct si2165_state *state, + const u16 reg, u8 *val, const int count) +{ + int ret; + u8 reg_buf[] = { reg >> 8, reg & 0xff }; + struct i2c_msg msg[] = { + { .addr = state->config.i2c_addr, + .flags = 0, .buf = reg_buf, .len = 2 }, + { .addr = state->config.i2c_addr, + .flags = I2C_M_RD, .buf = val, .len = count }, + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + dev_err(&state->i2c->dev, "%s: error (addr %02x reg %04x error (ret == %i)\n", + __func__, state->config.i2c_addr, reg, ret); + if (ret < 0) + return ret; + else + return -EREMOTEIO; + } + + if (debug & DEBUG_I2C_READ) + deb_i2c_read("reg: 0x%04x, data: %*ph\n", reg, count, val); + + return 0; +} + +static int si2165_readreg8(struct si2165_state *state, + const u16 reg, u8 *val) +{ + int ret; + + ret = si2165_read(state, reg, val, 1); + deb_readreg("R(0x%04x)=0x%02x\n", reg, *val); + return ret; +} + +static int si2165_readreg16(struct si2165_state *state, + const u16 reg, u16 *val) +{ + u8 buf[2]; + + int ret = si2165_read(state, reg, buf, 2); + *val = buf[0] | buf[1] << 8; + deb_readreg("R(0x%04x)=0x%04x\n", reg, *val); + return ret; +} + +static int si2165_writereg8(struct si2165_state *state, const u16 reg, u8 val) +{ + return si2165_write(state, reg, &val, 1); +} + +static int si2165_writereg16(struct si2165_state *state, const u16 reg, u16 val) +{ + u8 buf[2] = { val & 0xff, (val >> 8) & 0xff }; + + return si2165_write(state, reg, buf, 2); +} + +static int si2165_writereg24(struct si2165_state *state, const u16 reg, u32 val) +{ + u8 buf[3] = { val & 0xff, (val >> 8) & 0xff, (val >> 16) & 0xff }; + + return si2165_write(state, reg, buf, 3); +} + +static int si2165_writereg32(struct si2165_state *state, const u16 reg, u32 val) +{ + u8 buf[4] = { + val & 0xff, + (val >> 8) & 0xff, + (val >> 16) & 0xff, + (val >> 24) & 0xff + }; + return si2165_write(state, reg, buf, 4); +} + +static int si2165_writereg_mask8(struct si2165_state *state, const u16 reg, + u8 val, u8 mask) +{ + int ret; + u8 tmp; + + if (mask != 0xff) { + ret = si2165_readreg8(state, reg, &tmp); + if (ret < 0) + goto err; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + ret = si2165_writereg8(state, reg, val); +err: + return ret; +} + +static int si2165_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 1000; + return 0; +} + +static int si2165_init_pll(struct si2165_state *state) +{ + u32 ref_freq_Hz = state->config.ref_freq_Hz; + u8 divr = 1; /* 1..7 */ + u8 divp = 1; /* only 1 or 4 */ + u8 divn = 56; /* 1..63 */ + u8 divm = 8; + u8 divl = 12; + u8 buf[4]; + + /* hardcoded values can be deleted if calculation is verified + * or it yields the same values as the windows driver */ + switch (ref_freq_Hz) { + case 16000000u: + divn = 56; + break; + case 24000000u: + divr = 2; + divp = 4; + divn = 19; + break; + default: + /* ref_freq / divr must be between 4 and 16 MHz */ + if (ref_freq_Hz > 16000000u) + divr = 2; + + /* now select divn and divp such that + * fvco is in 1624..1824 MHz */ + if (1624000000u * divr > ref_freq_Hz * 2u * 63u) + divp = 4; + + /* is this already correct regarding rounding? */ + divn = 1624000000u * divr / (ref_freq_Hz * 2u * divp); + break; + } + + /* adc_clk and sys_clk depend on xtal and pll settings */ + state->fvco_hz = ref_freq_Hz / divr + * 2u * divn * divp; + state->adc_clk = state->fvco_hz / (divm * 4u); + state->sys_clk = state->fvco_hz / (divl * 2u); + + /* write pll registers 0x00a0..0x00a3 at once */ + buf[0] = divl; + buf[1] = divm; + buf[2] = (divn & 0x3f) | ((divp == 1) ? 0x40 : 0x00) | 0x80; + buf[3] = divr; + return si2165_write(state, 0x00a0, buf, 4); +} + +static int si2165_adjust_pll_divl(struct si2165_state *state, u8 divl) +{ + state->sys_clk = state->fvco_hz / (divl * 2u); + return si2165_writereg8(state, 0x00a0, divl); /* pll_divl */ +} + +static u32 si2165_get_fe_clk(struct si2165_state *state) +{ + /* assume Oversampling mode Ovr4 is used */ + return state->adc_clk; +} + +static bool si2165_wait_init_done(struct si2165_state *state) +{ + int ret = -EINVAL; + u8 val = 0; + int i; + + for (i = 0; i < 3; ++i) { + si2165_readreg8(state, 0x0054, &val); + if (val == 0x01) + return 0; + usleep_range(1000, 50000); + } + dev_err(&state->i2c->dev, "%s: init_done was not set\n", + KBUILD_MODNAME); + return ret; +} + +static int si2165_upload_firmware_block(struct si2165_state *state, + const u8 *data, u32 len, u32 *poffset, u32 block_count) +{ + int ret; + u8 buf_ctrl[4] = { 0x00, 0x00, 0x00, 0xc0 }; + u8 wordcount; + u32 cur_block = 0; + u32 offset = poffset ? *poffset : 0; + + if (len < 4) + return -EINVAL; + if (len % 4 != 0) + return -EINVAL; + + deb_fw_load("si2165_upload_firmware_block called with len=0x%x offset=0x%x blockcount=0x%x\n", + len, offset, block_count); + while (offset+12 <= len && cur_block < block_count) { + deb_fw_load("si2165_upload_firmware_block in while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n", + len, offset, cur_block, block_count); + wordcount = data[offset]; + if (wordcount < 1 || data[offset+1] || + data[offset+2] || data[offset+3]) { + dev_warn(&state->i2c->dev, + "%s: bad fw data[0..3] = %*ph\n", + KBUILD_MODNAME, 4, data); + return -EINVAL; + } + + if (offset + 8 + wordcount * 4 > len) { + dev_warn(&state->i2c->dev, + "%s: len is too small for block len=%d, wordcount=%d\n", + KBUILD_MODNAME, len, wordcount); + return -EINVAL; + } + + buf_ctrl[0] = wordcount - 1; + + ret = si2165_write(state, 0x0364, buf_ctrl, 4); + if (ret < 0) + goto error; + ret = si2165_write(state, 0x0368, data+offset+4, 4); + if (ret < 0) + goto error; + + offset += 8; + + while (wordcount > 0) { + ret = si2165_write(state, 0x36c, data+offset, 4); + if (ret < 0) + goto error; + wordcount--; + offset += 4; + } + cur_block++; + } + + deb_fw_load("si2165_upload_firmware_block after while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n", + len, offset, cur_block, block_count); + + if (poffset) + *poffset = offset; + + deb_fw_load("si2165_upload_firmware_block returned offset=0x%x\n", + offset); + + return 0; +error: + return ret; +} + +static int si2165_upload_firmware(struct si2165_state *state) +{ + /* int ret; */ + u8 val[3]; + u16 val16; + int ret; + + const struct firmware *fw = NULL; + u8 *fw_file = SI2165_FIRMWARE; + const u8 *data; + u32 len; + u32 offset; + u8 patch_version; + u8 block_count; + u16 crc_expected; + + /* request the firmware, this will block and timeout */ + ret = request_firmware(&fw, fw_file, state->i2c->dev.parent); + if (ret) { + dev_warn(&state->i2c->dev, "%s: firmare file '%s' not found\n", + KBUILD_MODNAME, fw_file); + goto error; + } + + data = fw->data; + len = fw->size; + + dev_info(&state->i2c->dev, "%s: downloading firmware from file '%s' size=%d\n", + KBUILD_MODNAME, fw_file, len); + + if (len % 4 != 0) { + dev_warn(&state->i2c->dev, "%s: firmware size is not multiple of 4\n", + KBUILD_MODNAME); + ret = -EINVAL; + goto error; + } + + /* check header (8 bytes) */ + if (len < 8) { + dev_warn(&state->i2c->dev, "%s: firmware header is missing\n", + KBUILD_MODNAME); + ret = -EINVAL; + goto error; + } + + if (data[0] != 1 || data[1] != 0) { + dev_warn(&state->i2c->dev, "%s: firmware file version is wrong\n", + KBUILD_MODNAME); + ret = -EINVAL; + goto error; + } + + patch_version = data[2]; + block_count = data[4]; + crc_expected = data[7] << 8 | data[6]; + + /* start uploading fw */ + /* boot/wdog status */ + ret = si2165_writereg8(state, 0x0341, 0x00); + if (ret < 0) + goto error; + /* reset */ + ret = si2165_writereg8(state, 0x00c0, 0x00); + if (ret < 0) + goto error; + /* boot/wdog status */ + ret = si2165_readreg8(state, 0x0341, val); + if (ret < 0) + goto error; + + /* enable reset on error */ + ret = si2165_readreg8(state, 0x035c, val); + if (ret < 0) + goto error; + ret = si2165_readreg8(state, 0x035c, val); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x035c, 0x02); + if (ret < 0) + goto error; + + /* start right after the header */ + offset = 8; + + dev_info(&state->i2c->dev, "%s: si2165_upload_firmware extracted patch_version=0x%02x, block_count=0x%02x, crc_expected=0x%04x\n", + KBUILD_MODNAME, patch_version, block_count, crc_expected); + + ret = si2165_upload_firmware_block(state, data, len, &offset, 1); + if (ret < 0) + goto error; + + ret = si2165_writereg8(state, 0x0344, patch_version); + if (ret < 0) + goto error; + + /* reset crc */ + ret = si2165_writereg8(state, 0x0379, 0x01); + if (ret) + return ret; + + ret = si2165_upload_firmware_block(state, data, len, + &offset, block_count); + if (ret < 0) { + dev_err(&state->i2c->dev, + "%s: firmare could not be uploaded\n", + KBUILD_MODNAME); + goto error; + } + + /* read crc */ + ret = si2165_readreg16(state, 0x037a, &val16); + if (ret) + goto error; + + if (val16 != crc_expected) { + dev_err(&state->i2c->dev, + "%s: firmware crc mismatch %04x != %04x\n", + KBUILD_MODNAME, val16, crc_expected); + ret = -EINVAL; + goto error; + } + + ret = si2165_upload_firmware_block(state, data, len, &offset, 5); + if (ret) + goto error; + + if (len != offset) { + dev_err(&state->i2c->dev, + "%s: firmare len mismatch %04x != %04x\n", + KBUILD_MODNAME, len, offset); + ret = -EINVAL; + goto error; + } + + /* reset watchdog error register */ + ret = si2165_writereg_mask8(state, 0x0341, 0x02, 0x02); + if (ret < 0) + goto error; + + /* enable reset on error */ + ret = si2165_writereg_mask8(state, 0x035c, 0x01, 0x01); + if (ret < 0) + goto error; + + dev_info(&state->i2c->dev, "%s: fw load finished\n", KBUILD_MODNAME); + + ret = 0; + state->firmware_loaded = true; +error: + if (fw) { + release_firmware(fw); + fw = NULL; + } + + return ret; +} + +static int si2165_init(struct dvb_frontend *fe) +{ + int ret = 0; + struct si2165_state *state = fe->demodulator_priv; + u8 val; + u8 patch_version = 0x00; + + dprintk("%s: called\n", __func__); + + /* powerup */ + ret = si2165_writereg8(state, 0x0000, state->config.chip_mode); + if (ret < 0) + goto error; + /* dsp_clock_enable */ + ret = si2165_writereg8(state, 0x0104, 0x01); + if (ret < 0) + goto error; + ret = si2165_readreg8(state, 0x0000, &val); /* verify chip_mode */ + if (ret < 0) + goto error; + if (val != state->config.chip_mode) { + dev_err(&state->i2c->dev, "%s: could not set chip_mode\n", + KBUILD_MODNAME); + return -EINVAL; + } + + /* agc */ + ret = si2165_writereg8(state, 0x018b, 0x00); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x0190, 0x01); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x0170, 0x00); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x0171, 0x07); + if (ret < 0) + goto error; + /* rssi pad */ + ret = si2165_writereg8(state, 0x0646, 0x00); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x0641, 0x00); + if (ret < 0) + goto error; + + ret = si2165_init_pll(state); + if (ret < 0) + goto error; + + /* enable chip_init */ + ret = si2165_writereg8(state, 0x0050, 0x01); + if (ret < 0) + goto error; + /* set start_init */ + ret = si2165_writereg8(state, 0x0096, 0x01); + if (ret < 0) + goto error; + ret = si2165_wait_init_done(state); + if (ret < 0) + goto error; + + /* disable chip_init */ + ret = si2165_writereg8(state, 0x0050, 0x00); + if (ret < 0) + goto error; + + /* ber_pkt */ + ret = si2165_writereg16(state, 0x0470 , 0x7530); + if (ret < 0) + goto error; + + ret = si2165_readreg8(state, 0x0344, &patch_version); + if (ret < 0) + goto error; + + ret = si2165_writereg8(state, 0x00cb, 0x00); + if (ret < 0) + goto error; + + /* dsp_addr_jump */ + ret = si2165_writereg32(state, 0x0348, 0xf4000000); + if (ret < 0) + goto error; + /* boot/wdog status */ + ret = si2165_readreg8(state, 0x0341, &val); + if (ret < 0) + goto error; + + if (patch_version == 0x00) { + ret = si2165_upload_firmware(state); + if (ret < 0) + goto error; + } + + /* write adc values after each reset*/ + ret = si2165_writereg8(state, 0x012a, 0x46); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x012c, 0x00); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x012e, 0x0a); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x012f, 0xff); + if (ret < 0) + goto error; + ret = si2165_writereg8(state, 0x0123, 0x70); + if (ret < 0) + goto error; + + return 0; +error: + return ret; +} + +static int si2165_sleep(struct dvb_frontend *fe) +{ + int ret; + struct si2165_state *state = fe->demodulator_priv; + + /* dsp clock disable */ + ret = si2165_writereg8(state, 0x0104, 0x00); + if (ret < 0) + return ret; + /* chip mode */ + ret = si2165_writereg8(state, 0x0000, SI2165_MODE_OFF); + if (ret < 0) + return ret; + return 0; +} + +static int si2165_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + int ret; + u8 fec_lock = 0; + struct si2165_state *state = fe->demodulator_priv; + + if (!state->has_dvbt) + return -EINVAL; + + /* check fec_lock */ + ret = si2165_readreg8(state, 0x4e0, &fec_lock); + if (ret < 0) + return ret; + *status = 0; + if (fec_lock & 0x01) { + *status |= FE_HAS_SIGNAL; + *status |= FE_HAS_CARRIER; + *status |= FE_HAS_VITERBI; + *status |= FE_HAS_SYNC; + *status |= FE_HAS_LOCK; + } + + return 0; +} + +static int si2165_set_oversamp(struct si2165_state *state, u32 dvb_rate) +{ + u64 oversamp; + u32 reg_value; + + oversamp = si2165_get_fe_clk(state); + oversamp <<= 23; + do_div(oversamp, dvb_rate); + reg_value = oversamp & 0x3fffffff; + + /* oversamp, usbdump contained 0x03100000; */ + return si2165_writereg32(state, 0x00e4, reg_value); +} + +static int si2165_set_if_freq_shift(struct si2165_state *state, u32 IF) +{ + u64 if_freq_shift; + s32 reg_value = 0; + u32 fe_clk = si2165_get_fe_clk(state); + + if_freq_shift = IF; + if_freq_shift <<= 29; + + do_div(if_freq_shift, fe_clk); + reg_value = (s32)if_freq_shift; + + if (state->config.inversion) + reg_value = -reg_value; + + reg_value = reg_value & 0x1fffffff; + + /* if_freq_shift, usbdump contained 0x023ee08f; */ + return si2165_writereg32(state, 0x00e8, reg_value); +} + +static int si2165_set_parameters(struct dvb_frontend *fe) +{ + int ret; + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct si2165_state *state = fe->demodulator_priv; + u8 val[3]; + u32 IF; + u32 dvb_rate = 0; + u16 bw10k; + + dprintk("%s: called\n", __func__); + + if (!fe->ops.tuner_ops.get_if_frequency) { + dev_err(&state->i2c->dev, + "%s: Error: get_if_frequency() not defined at tuner. Can't work without it!\n", + KBUILD_MODNAME); + return -EINVAL; + } + + if (!state->has_dvbt) + return -EINVAL; + + if (p->bandwidth_hz > 0) { + dvb_rate = p->bandwidth_hz * 8 / 7; + bw10k = p->bandwidth_hz / 10000; + } else { + dvb_rate = 8 * 8 / 7; + bw10k = 800; + } + + /* standard = DVB-T */ + ret = si2165_writereg8(state, 0x00ec, 0x01); + if (ret < 0) + return ret; + ret = si2165_adjust_pll_divl(state, 12); + if (ret < 0) + return ret; + + fe->ops.tuner_ops.get_if_frequency(fe, &IF); + ret = si2165_set_if_freq_shift(state, IF); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x08f8, 0x00); + if (ret < 0) + return ret; + /* ts output config */ + ret = si2165_writereg8(state, 0x04e4, 0x20); + if (ret < 0) + return ret; + ret = si2165_writereg16(state, 0x04ef, 0x00fe); + if (ret < 0) + return ret; + ret = si2165_writereg24(state, 0x04f4, 0x555555); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x04e5, 0x01); + if (ret < 0) + return ret; + /* bandwidth in 10KHz steps */ + ret = si2165_writereg16(state, 0x0308, bw10k); + if (ret < 0) + return ret; + ret = si2165_set_oversamp(state, dvb_rate); + if (ret < 0) + return ret; + /* impulsive_noise_remover */ + ret = si2165_writereg8(state, 0x031c, 0x01); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x00cb, 0x00); + if (ret < 0) + return ret; + /* agc2 */ + ret = si2165_writereg8(state, 0x016e, 0x41); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x016c, 0x0e); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x016d, 0x10); + if (ret < 0) + return ret; + /* agc */ + ret = si2165_writereg8(state, 0x015b, 0x03); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x0150, 0x78); + if (ret < 0) + return ret; + /* agc */ + ret = si2165_writereg8(state, 0x01a0, 0x78); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x01c8, 0x68); + if (ret < 0) + return ret; + /* freq_sync_range */ + ret = si2165_writereg16(state, 0x030c, 0x0064); + if (ret < 0) + return ret; + /* gp_reg0 */ + ret = si2165_readreg8(state, 0x0387, val); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x0387, 0x00); + if (ret < 0) + return ret; + /* dsp_addr_jump */ + ret = si2165_writereg32(state, 0x0348, 0xf4000000); + if (ret < 0) + return ret; + + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* recalc if_freq_shift if IF might has changed */ + fe->ops.tuner_ops.get_if_frequency(fe, &IF); + ret = si2165_set_if_freq_shift(state, IF); + if (ret < 0) + return ret; + + /* boot/wdog status */ + ret = si2165_readreg8(state, 0x0341, val); + if (ret < 0) + return ret; + ret = si2165_writereg8(state, 0x0341, 0x00); + if (ret < 0) + return ret; + /* reset all */ + ret = si2165_writereg8(state, 0x00c0, 0x00); + if (ret < 0) + return ret; + /* gp_reg0 */ + ret = si2165_writereg32(state, 0x0384, 0x00000000); + if (ret < 0) + return ret; + /* start_synchro */ + ret = si2165_writereg8(state, 0x02e0, 0x01); + if (ret < 0) + return ret; + /* boot/wdog status */ + ret = si2165_readreg8(state, 0x0341, val); + if (ret < 0) + return ret; + + return 0; +} + +static void si2165_release(struct dvb_frontend *fe) +{ + struct si2165_state *state = fe->demodulator_priv; + + dprintk("%s: called\n", __func__); + kfree(state); +} + +static struct dvb_frontend_ops si2165_ops = { + .info = { + .name = "Silicon Labs Si2165", + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_MUTE_TS | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_RECOVER + }, + + .get_tune_settings = si2165_get_tune_settings, + + .init = si2165_init, + .sleep = si2165_sleep, + + .set_frontend = si2165_set_parameters, + .read_status = si2165_read_status, + + .release = si2165_release, +}; + +struct dvb_frontend *si2165_attach(const struct si2165_config *config, + struct i2c_adapter *i2c) +{ + struct si2165_state *state = NULL; + int n; + int io_ret; + u8 val; + + if (config == NULL || i2c == NULL) + goto error; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct si2165_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = i2c; + state->config = *config; + + if (state->config.ref_freq_Hz < 4000000 + || state->config.ref_freq_Hz > 27000000) { + dev_err(&state->i2c->dev, "%s: ref_freq of %d Hz not supported by this driver\n", + KBUILD_MODNAME, state->config.ref_freq_Hz); + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &si2165_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + /* powerup */ + io_ret = si2165_writereg8(state, 0x0000, state->config.chip_mode); + if (io_ret < 0) + goto error; + + io_ret = si2165_readreg8(state, 0x0000, &val); + if (io_ret < 0) + goto error; + if (val != state->config.chip_mode) + goto error; + + io_ret = si2165_readreg8(state, 0x0023 , &state->revcode); + if (io_ret < 0) + goto error; + + io_ret = si2165_readreg8(state, 0x0118, &state->chip_type); + if (io_ret < 0) + goto error; + + /* powerdown */ + io_ret = si2165_writereg8(state, 0x0000, SI2165_MODE_OFF); + if (io_ret < 0) + goto error; + + dev_info(&state->i2c->dev, "%s: hardware revision 0x%02x, chip type 0x%02x\n", + KBUILD_MODNAME, state->revcode, state->chip_type); + + /* It is a guess that register 0x0118 (chip type?) can be used to + * differ between si2161, si2163 and si2165 + * Only si2165 has been tested. + */ + if (state->revcode == 0x03 && state->chip_type == 0x07) { + state->has_dvbt = true; + state->has_dvbc = true; + } else { + dev_err(&state->i2c->dev, "%s: Unsupported chip.\n", + KBUILD_MODNAME); + goto error; + } + + n = 0; + if (state->has_dvbt) { + state->frontend.ops.delsys[n++] = SYS_DVBT; + strlcat(state->frontend.ops.info.name, " DVB-T", + sizeof(state->frontend.ops.info.name)); + } + if (state->has_dvbc) + dev_warn(&state->i2c->dev, "%s: DVB-C is not yet supported.\n", + KBUILD_MODNAME); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(si2165_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Silicon Labs Si2165 DVB-C/-T Demodulator driver"); +MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(SI2165_FIRMWARE); diff --git a/drivers/media/dvb-frontends/si2165.h b/drivers/media/dvb-frontends/si2165.h new file mode 100644 index 000000000000..7a6b59ded4e2 --- /dev/null +++ b/drivers/media/dvb-frontends/si2165.h @@ -0,0 +1,64 @@ +/* + Driver for Silicon Labs SI2165 DVB-C/-T Demodulator + + Copyright (C) 2013-2014 Matthias Schwarzott <zzam@gentoo.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + References: + http://www.silabs.com/Support%20Documents/TechnicalDocs/Si2165-short.pdf +*/ + +#ifndef _DVB_SI2165_H +#define _DVB_SI2165_H + +#include <linux/dvb/frontend.h> + +#if IS_ENABLED(CONFIG_DVB_SI2165) + +enum { + SI2165_MODE_OFF = 0x00, + SI2165_MODE_PLL_EXT = 0x20, + SI2165_MODE_PLL_XTAL = 0x21 +}; + +struct si2165_config { + /* i2c addr + * possible values: 0x64,0x65,0x66,0x67 */ + u8 i2c_addr; + + /* external clock or XTAL */ + u8 chip_mode; + + /* frequency of external clock or xtal in Hz + * possible values: 4000000, 16000000, 20000000, 240000000, 27000000 + */ + u32 ref_freq_Hz; + + /* invert the spectrum */ + bool inversion; +}; + +/* Addresses: 0x64,0x65,0x66,0x67 */ +struct dvb_frontend *si2165_attach( + const struct si2165_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *si2165_attach( + const struct si2165_config *config, + struct i2c_adapter *i2c) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_SI2165 */ + +#endif /* _DVB_SI2165_H */ diff --git a/drivers/media/dvb-frontends/si2165_priv.h b/drivers/media/dvb-frontends/si2165_priv.h new file mode 100644 index 000000000000..d4cc93fe1096 --- /dev/null +++ b/drivers/media/dvb-frontends/si2165_priv.h @@ -0,0 +1,23 @@ +/* + Driver for Silicon Labs SI2165 DVB-C/-T Demodulator + + Copyright (C) 2013-2014 Matthias Schwarzott <zzam@gentoo.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +*/ + +#ifndef _DVB_SI2165_PRIV +#define _DVB_SI2165_PRIV + +#define SI2165_FIRMWARE "dvb-demod-si2165.fw" + +#endif /* _DVB_SI2165_PRIV */ |