diff options
| author | Takashi Iwai <tiwai@suse.de> | 2011-10-03 18:09:14 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-10-03 20:51:51 -0700 |
| commit | 05faadcf59507e8eea57ffbeea9cbb14c9a2ab3d (patch) | |
| tree | b9ca093ad44c9391464756053d5d1f7c0885704f /drivers/misc/lis3lv02d/lis3lv02d.c | |
| parent | 0f86267b79bc6e357b8606077c7f70239045ea9c (diff) | |
| download | linux-05faadcf59507e8eea57ffbeea9cbb14c9a2ab3d.tar.gz linux-05faadcf59507e8eea57ffbeea9cbb14c9a2ab3d.tar.bz2 linux-05faadcf59507e8eea57ffbeea9cbb14c9a2ab3d.zip | |
lis3: fix regression of HP DriveGuard with 8bit chip
Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a
regression on HP laptops with 8bit chip. Writing CTRL2_BOOT_8B bit seems
clearing the BIOS setup, and no proper interrupt for DriveGuard will be
triggered any more.
Since the init code there is basically only for embedded devices, put a
pdata check so that the problematic initialization will be skipped for
hp_accel stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/misc/lis3lv02d/lis3lv02d.c')
| -rw-r--r-- | drivers/misc/lis3lv02d/lis3lv02d.c | 14 |
1 files changed, 8 insertions, 6 deletions
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c index b928bc14e97b..8b51cd62d067 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d.c +++ b/drivers/misc/lis3lv02d/lis3lv02d.c @@ -375,12 +375,14 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3) * both have been read. So the value read will always be correct. * Set BOOT bit to refresh factory tuning values. */ - lis3->read(lis3, CTRL_REG2, ®); - if (lis3->whoami == WAI_12B) - reg |= CTRL2_BDU | CTRL2_BOOT; - else - reg |= CTRL2_BOOT_8B; - lis3->write(lis3, CTRL_REG2, reg); + if (lis3->pdata) { + lis3->read(lis3, CTRL_REG2, ®); + if (lis3->whoami == WAI_12B) + reg |= CTRL2_BDU | CTRL2_BOOT; + else + reg |= CTRL2_BOOT_8B; + lis3->write(lis3, CTRL_REG2, reg); + } /* LIS3 power on delay is quite long */ msleep(lis3->pwron_delay / lis3lv02d_get_odr()); |