Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Introduce host claiming by context to support blkmq
   - Preparations for enabling CQE (eMMC CMDQ) requests
   - Re-factorizations to prepare for blkmq support
   - Re-factorizations to prepare for CQE support
   - Fix signal voltage switch for SD cards without power cycle
   - Convert RPMB to a character device
   - Export eMMC revision via sysfs
   - Support eMMC DT binding for fixed driver type
   - Document mmc_regulator_get_supply() API

 MMC host:
   - omap_hsmmc: Updated regulator management for PBIAS
   - sdhci-omap: Add new OMAP SDHCI driver
   - meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
   - sdhci-pci: Add support for Intel CDF
   - sdhci-acpi: Fix voltage switch for some Intel host controllers
   - sdhci-msm: Enable delay circuit calibration clocks
   - sdhci-msm: Manage power IRQ properly
   - mediatek: Add support of mt2701/mt2712
   - mediatek: Updates management of clocks and tunings
   - mediatek: Upgrade eMMC HS400 support
   - rtsx_pci: Update tuning for gen3 PCI-Express
   - renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
   - Catch all errors when getting regulators
   - Various additional improvements and cleanups"

* tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
  sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute
  dt-bindings: sdhci-fujitsu: document cmd-dat-delay property
  mmc: tmio: Replace msleep() of 20ms or less with usleep_range()
  mmc: dw_mmc: Convert timers to use timer_setup()
  mmc: dw_mmc: Cleanup the DTO timer like the CTO one
  mmc: vub300: Use common code in __download_offload_pseudocode()
  mmc: tmio: Use common error handling code in tmio_mmc_host_probe()
  mmc: Convert timers to use timer_setup()
  mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers
  mmc: sdhci-acpi: Let devices define their own private data
  mmc: mediatek: perfer to use rise edge latching for cmd line
  mmc: mediatek: improve eMMC hs400 mode read performance
  mmc: mediatek: add latch-ck support
  mmc: mediatek: add support of source_cg clock
  mmc: mediatek: add stop_clk fix and enhance_rx support
  mmc: mediatek: add busy_check support
  mmc: mediatek: add async fifo and data tune support
  mmc: mediatek: add pad_tune0 support
  mmc: mediatek: make hs400_tune_response only for mt8173
  arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
  ...

1 files changed, 41 insertions, 5 deletions

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 36217ad5e9b1..a552f61060d2 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -780,6 +780,7 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
 MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
 MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
 MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv);
+MMC_DEV_ATTR(rev, "0x%x\n", card->ext_csd.rev);
 MMC_DEV_ATTR(pre_eol_info, "%02x\n", card->ext_csd.pre_eol_info);
 MMC_DEV_ATTR(life_time, "0x%02x 0x%02x\n",
 	card->ext_csd.device_life_time_est_typ_a,
@@ -838,6 +839,7 @@ static struct attribute *mmc_std_attrs[] = {
 	&dev_attr_name.attr,
 	&dev_attr_oemid.attr,
 	&dev_attr_prv.attr,
+	&dev_attr_rev.attr,
 	&dev_attr_pre_eol_info.attr,
 	&dev_attr_life_time.attr,
 	&dev_attr_serial.attr,
@@ -1289,13 +1291,18 @@ out_err:
 static void mmc_select_driver_type(struct mmc_card *card)
 {
 	int card_drv_type, drive_strength, drv_type;
+	int fixed_drv_type = card->host->fixed_drv_type;
 
 	card_drv_type = card->ext_csd.raw_driver_strength |
 			mmc_driver_type_mask(0);
 
-	drive_strength = mmc_select_drive_strength(card,
-						   card->ext_csd.hs200_max_dtr,
-						   card_drv_type, &drv_type);
+	if (fixed_drv_type >= 0)
+		drive_strength = card_drv_type & mmc_driver_type_mask(fixed_drv_type)
+				 ? fixed_drv_type : 0;
+	else
+		drive_strength = mmc_select_drive_strength(card,
+							   card->ext_csd.hs200_max_dtr,
+							   card_drv_type, &drv_type);
 
 	card->drive_strength = drive_strength;
 
@@ -1786,12 +1793,41 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
+	 * Enable Command Queue if supported. Note that Packed Commands cannot
+	 * be used with Command Queue.
+	 */
+	card->ext_csd.cmdq_en = false;
+	if (card->ext_csd.cmdq_support && host->caps2 & MMC_CAP2_CQE) {
+		err = mmc_cmdq_enable(card);
+		if (err && err != -EBADMSG)
+			goto free_card;
+		if (err) {
+			pr_warn("%s: Enabling CMDQ failed\n",
+				mmc_hostname(card->host));
+			card->ext_csd.cmdq_support = false;
+			card->ext_csd.cmdq_depth = 0;
+			err = 0;
+		}
+	}
+	/*
 	 * In some cases (e.g. RPMB or mmc_test), the Command Queue must be
 	 * disabled for a time, so a flag is needed to indicate to re-enable the
 	 * Command Queue.
 	 */
 	card->reenable_cmdq = card->ext_csd.cmdq_en;
 
+	if (card->ext_csd.cmdq_en && !host->cqe_enabled) {
+		err = host->cqe_ops->cqe_enable(host, card);
+		if (err) {
+			pr_err("%s: Failed to enable CQE, error %d\n",
+				mmc_hostname(host), err);
+		} else {
+			host->cqe_enabled = true;
+			pr_info("%s: Command Queue Engine enabled\n",
+				mmc_hostname(host));
+		}
+	}
+
 	if (!oldcard)
 		host->card = card;
 
@@ -1911,14 +1947,14 @@ static void mmc_detect(struct mmc_host *host)
 {
 	int err;
 
-	mmc_get_card(host->card);
+	mmc_get_card(host->card, NULL);
 
 	/*
 	 * Just check if our card has been removed.
 	 */
 	err = _mmc_detect_card_removed(host);
 
-	mmc_put_card(host->card);
+	mmc_put_card(host->card, NULL);
 
 	if (err) {
 		mmc_remove(host);