diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-11 18:11:21 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-11 18:11:21 -0700 |
commit | 8931084c0d017314ad025f19353f7c5c1d3782d8 (patch) | |
tree | e5ae4dcaba8353cad27744b0150dd0b6513413fc /drivers/mmc/core | |
parent | 17a20acaf171124017f43bc70bb4d7ca88070659 (diff) | |
parent | 59592cc1f5937ced72e11e681c3e358a0375f7ae (diff) | |
download | linux-8931084c0d017314ad025f19353f7c5c1d3782d8.tar.gz linux-8931084c0d017314ad025f19353f7c5c1d3782d8.tar.bz2 linux-8931084c0d017314ad025f19353f7c5c1d3782d8.zip |
Merge tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Let the dma map ops deal with bouncing and drop dma_max_pfn() from
the dma-mapping interface for ARM
- Convert the generic MMC DT doc to YAML schemas
- Drop questionable support for powered-on re-init of SDIO cards at
runtime resume and for SDIO HW reset
- Prevent questionable re-init of powered-on removable SDIO cards at
system resume
- Cleanup and clarify some SDIO core code
MMC host:
- tmio: Make runtime PM enablement more flexible for variants
- tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt
to clarify
- sdhci-pci: Add support for Intel EHL
- sdhci-pci-o2micro: Enable support for 8-bit bus
- sdhci-msm: Prevent acquiring a mutex while holding a spin_lock
- sdhci-of-esdhc: Improve clock management and tuning
- sdhci_am654: Enable support for 4 and 8-bit bus on J721E
- sdhci-sprd: Use pinctrl for a proper signal voltage switch
- sdhci-sprd: Add support for HS400 enhanced strobe mode
- sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the
clock
- sdhci-sprd: Add support for optional gate clock
- sunxi-mmc: Convert DT doc to YAML schemas
- meson-gx: Add support for broken DRAM access for DMA
MEMSTICK core:
- Fixup error path of memstick_init()"
* tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654
mmc: alcor: remove a redundant greater or equal to zero comparison
mmc: sdhci-msm: fix mutex while in spinlock
mmc: sdhci_am654: Make some symbols static
dma-mapping: remove dma_max_pfn
mmc: core: let the dma map ops handle bouncing
dt-binding: mmc: rename tmio_mmc.txt to renesas,sdhi.txt
mmc: sdhci-sprd: Add pin control support for voltage switch
dt-bindings: mmc: sprd: Add pinctrl support
mmc: sdhci-sprd: Add start_signal_voltage_switch ops
mmc: sdhci-pci: Add support for Intel EHL
mmc: tmio: Use dma_max_mapping_size() instead of a workaround
mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card()
mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card()
mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume
mmc: sdio: Drop powered-on re-init at runtime resume and HW reset
mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card()
mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore()
mmc: sdio: Turn sdio_run_irqs() into static
mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUS
...
Diffstat (limited to 'drivers/mmc/core')
-rw-r--r-- | drivers/mmc/core/debugfs.c | 56 | ||||
-rw-r--r-- | drivers/mmc/core/mmc_test.c | 10 | ||||
-rw-r--r-- | drivers/mmc/core/queue.c | 7 | ||||
-rw-r--r-- | drivers/mmc/core/sdio.c | 92 | ||||
-rw-r--r-- | drivers/mmc/core/sdio_irq.c | 3 |
5 files changed, 49 insertions, 119 deletions
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 2797771a5fa8..09e0c7659469 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -227,45 +227,21 @@ void mmc_add_host_debugfs(struct mmc_host *host) struct dentry *root; root = debugfs_create_dir(mmc_hostname(host), NULL); - if (IS_ERR(root)) - /* Don't complain -- debugfs just isn't enabled */ - return; - if (!root) - /* Complain -- debugfs is enabled, but it failed to - * create the directory. */ - goto err_root; - host->debugfs_root = root; - if (!debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops)) - goto err_node; - - if (!debugfs_create_x32("caps", S_IRUSR, root, &host->caps)) - goto err_node; - - if (!debugfs_create_x32("caps2", S_IRUSR, root, &host->caps2)) - goto err_node; - - if (!debugfs_create_file("clock", S_IRUSR | S_IWUSR, root, host, - &mmc_clock_fops)) - goto err_node; + debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops); + debugfs_create_x32("caps", S_IRUSR, root, &host->caps); + debugfs_create_x32("caps2", S_IRUSR, root, &host->caps2); + debugfs_create_file("clock", S_IRUSR | S_IWUSR, root, host, + &mmc_clock_fops); #ifdef CONFIG_FAIL_MMC_REQUEST if (fail_request) setup_fault_attr(&fail_default_attr, fail_request); host->fail_mmc_request = fail_default_attr; - if (IS_ERR(fault_create_debugfs_attr("fail_mmc_request", - root, - &host->fail_mmc_request))) - goto err_node; + fault_create_debugfs_attr("fail_mmc_request", root, + &host->fail_mmc_request); #endif - return; - -err_node: - debugfs_remove_recursive(root); - host->debugfs_root = NULL; -err_root: - dev_err(&host->class_dev, "failed to initialize debugfs\n"); } void mmc_remove_host_debugfs(struct mmc_host *host) @@ -282,25 +258,9 @@ void mmc_add_card_debugfs(struct mmc_card *card) return; root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root); - if (IS_ERR(root)) - /* Don't complain -- debugfs just isn't enabled */ - return; - if (!root) - /* Complain -- debugfs is enabled, but it failed to - * create the directory. */ - goto err; - card->debugfs_root = root; - if (!debugfs_create_x32("state", S_IRUSR, root, &card->state)) - goto err; - - return; - -err: - debugfs_remove_recursive(root); - card->debugfs_root = NULL; - dev_err(&card->dev, "failed to initialize debugfs\n"); + debugfs_create_x32("state", S_IRUSR, root, &card->state); } void mmc_remove_card_debugfs(struct mmc_card *card) diff --git a/drivers/mmc/core/mmc_test.c b/drivers/mmc/core/mmc_test.c index b27df2d2b5ae..492dd4596314 100644 --- a/drivers/mmc/core/mmc_test.c +++ b/drivers/mmc/core/mmc_test.c @@ -3167,15 +3167,7 @@ static int __mmc_test_register_dbgfs_file(struct mmc_card *card, struct mmc_test_dbgfs_file *df; if (card->debugfs_root) - file = debugfs_create_file(name, mode, card->debugfs_root, - card, fops); - - if (IS_ERR_OR_NULL(file)) { - dev_err(&card->dev, - "Can't create %s. Perhaps debugfs is disabled.\n", - name); - return -ENODEV; - } + debugfs_create_file(name, mode, card->debugfs_root, card, fops); df = kmalloc(sizeof(*df), GFP_KERNEL); if (!df) { diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index 3557d5c51141..e327f80ebe70 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -350,18 +350,15 @@ static const struct blk_mq_ops mmc_mq_ops = { static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) { struct mmc_host *host = card->host; - u64 limit = BLK_BOUNCE_HIGH; unsigned block_size = 512; - if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask) - limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT; - blk_queue_flag_set(QUEUE_FLAG_NONROT, mq->queue); blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, mq->queue); if (mmc_can_erase(card)) mmc_queue_setup_discard(mq->queue, card); - blk_queue_bounce_limit(mq->queue, limit); + if (!mmc_dev(host)->dma_mask || !*mmc_dev(host)->dma_mask) + blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_HIGH); blk_queue_max_hw_sectors(mq->queue, min(host->max_blk_count, host->max_req_size / 512)); blk_queue_max_segments(mq->queue, host->max_segs); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 712a7742765e..8dd8fc32ecca 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -559,7 +559,7 @@ static void mmc_sdio_resend_if_cond(struct mmc_host *host, * we're trying to reinitialise. */ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, - struct mmc_card *oldcard, int powered_resume) + struct mmc_card *oldcard) { struct mmc_card *card; int err; @@ -582,11 +582,9 @@ try_again: /* * Inform the card of the voltage */ - if (!powered_resume) { - err = mmc_send_io_op_cond(host, ocr, &rocr); - if (err) - goto err; - } + err = mmc_send_io_op_cond(host, ocr, &rocr); + if (err) + goto err; /* * For SPI, enable CRC as appropriate. @@ -645,7 +643,7 @@ try_again: * try to init uhs card. sdio_read_cccr will take over this task * to make sure which speed mode should work. */ - if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) { + if (rocr & ocr & R4_18V_PRESENT) { err = mmc_set_uhs_voltage(host, ocr_card); if (err == -EAGAIN) { mmc_sdio_resend_if_cond(host, card); @@ -659,7 +657,7 @@ try_again: /* * For native busses: set card RCA and quit open drain mode. */ - if (!powered_resume && !mmc_host_is_spi(host)) { + if (!mmc_host_is_spi(host)) { err = mmc_send_relative_addr(host, &card->rca); if (err) goto remove; @@ -687,7 +685,7 @@ try_again: /* * Select card, as all following commands rely on that. */ - if (!powered_resume && !mmc_host_is_spi(host)) { + if (!mmc_host_is_spi(host)) { err = mmc_select_card(card); if (err) goto remove; @@ -816,10 +814,27 @@ err: return err; } -static int mmc_sdio_reinit_card(struct mmc_host *host, bool powered_resume) +static int mmc_sdio_reinit_card(struct mmc_host *host) { int ret; + /* + * Reset the card by performing the same steps that are taken by + * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. + * + * sdio_reset() is technically not needed. Having just powered up the + * hardware, it should already be in reset state. However, some + * platforms (such as SD8686 on OLPC) do not instantly cut power, + * meaning that a reset is required when restoring power soon after + * powering off. It is harmless in other cases. + * + * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, + * is not necessary for non-removable cards. However, it is required + * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and + * harmless in other situations. + * + */ + sdio_reset(host); mmc_go_idle(host); mmc_send_if_cond(host, host->card->ocr); @@ -828,8 +843,7 @@ static int mmc_sdio_reinit_card(struct mmc_host *host, bool powered_resume) if (ret) return ret; - return mmc_sdio_init_card(host, host->card->ocr, host->card, - powered_resume); + return mmc_sdio_init_card(host, host->card->ocr, host->card); } /* @@ -965,7 +979,11 @@ static int mmc_sdio_resume(struct mmc_host *host) /* Basic card reinitialization. */ mmc_claim_host(host); - /* Restore power if needed */ + /* + * Restore power and reinitialize the card when needed. Note that a + * removable card is checked from a detect work later on in the resume + * process. + */ if (!mmc_card_keep_power(host)) { mmc_power_up(host, host->card->ocr); /* @@ -979,12 +997,8 @@ static int mmc_sdio_resume(struct mmc_host *host) pm_runtime_set_active(&host->card->dev); pm_runtime_enable(&host->card->dev); } - } - - /* No need to reinitialize powered-resumed nonremovable cards */ - if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) { - err = mmc_sdio_reinit_card(host, mmc_card_keep_power(host)); - } else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) { + err = mmc_sdio_reinit_card(host); + } else if (mmc_card_wake_sdio_irq(host)) { /* We may have switched to 1-bit mode during suspend */ err = sdio_enable_4bit_bus(host->card); } @@ -1009,38 +1023,6 @@ out: return err; } -static int mmc_sdio_power_restore(struct mmc_host *host) -{ - int ret; - - /* - * Reset the card by performing the same steps that are taken by - * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. - * - * sdio_reset() is technically not needed. Having just powered up the - * hardware, it should already be in reset state. However, some - * platforms (such as SD8686 on OLPC) do not instantly cut power, - * meaning that a reset is required when restoring power soon after - * powering off. It is harmless in other cases. - * - * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, - * is not necessary for non-removable cards. However, it is required - * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and - * harmless in other situations. - * - */ - - mmc_claim_host(host); - - ret = mmc_sdio_reinit_card(host, mmc_card_keep_power(host)); - if (!ret && host->sdio_irqs) - mmc_signal_sdio_irq(host); - - mmc_release_host(host); - - return ret; -} - static int mmc_sdio_runtime_suspend(struct mmc_host *host) { /* No references to the card, cut the power to it. */ @@ -1058,7 +1040,7 @@ static int mmc_sdio_runtime_resume(struct mmc_host *host) /* Restore power and re-initialize. */ mmc_claim_host(host); mmc_power_up(host, host->card->ocr); - ret = mmc_sdio_power_restore(host); + ret = mmc_sdio_reinit_card(host); mmc_release_host(host); return ret; @@ -1067,7 +1049,7 @@ static int mmc_sdio_runtime_resume(struct mmc_host *host) static int mmc_sdio_hw_reset(struct mmc_host *host) { mmc_power_cycle(host, host->card->ocr); - return mmc_sdio_power_restore(host); + return mmc_sdio_reinit_card(host); } static int mmc_sdio_sw_reset(struct mmc_host *host) @@ -1079,7 +1061,7 @@ static int mmc_sdio_sw_reset(struct mmc_host *host) mmc_set_initial_state(host); mmc_set_initial_signal_voltage(host); - return mmc_sdio_reinit_card(host, 0); + return mmc_sdio_reinit_card(host); } static const struct mmc_bus_ops mmc_sdio_ops = { @@ -1129,7 +1111,7 @@ int mmc_attach_sdio(struct mmc_host *host) /* * Detect and init the card. */ - err = mmc_sdio_init_card(host, rocr, NULL, 0); + err = mmc_sdio_init_card(host, rocr, NULL); if (err) goto err; diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index 9f54a259a1b3..0bcc5e83bd1a 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -92,7 +92,7 @@ static int process_sdio_pending_irqs(struct mmc_host *host) return ret; } -void sdio_run_irqs(struct mmc_host *host) +static void sdio_run_irqs(struct mmc_host *host) { mmc_claim_host(host); if (host->sdio_irqs) { @@ -103,7 +103,6 @@ void sdio_run_irqs(struct mmc_host *host) } mmc_release_host(host); } -EXPORT_SYMBOL_GPL(sdio_run_irqs); void sdio_irq_work(struct work_struct *work) { |