diff options
author | Robert Jarzmik <robert.jarzmik@free.fr> | 2011-10-05 15:22:34 +0200 |
---|---|---|
committer | Artem Bityutskiy <artem.bityutskiy@intel.com> | 2011-10-14 12:03:47 +0300 |
commit | efa2ca73a7bc1a8f8e66bcfad33391746819ffe6 (patch) | |
tree | 09846f5b9888fcf935be868b1362cef767d9ebec /drivers/mtd | |
parent | 86a9893d08420a320191a1bcc0136ec2b6b04595 (diff) | |
download | linux-efa2ca73a7bc1a8f8e66bcfad33391746819ffe6.tar.gz linux-efa2ca73a7bc1a8f8e66bcfad33391746819ffe6.tar.bz2 linux-efa2ca73a7bc1a8f8e66bcfad33391746819ffe6.zip |
mtd: Add DiskOnChip G3 support
Add support for DiskOnChip G3 chips. The support is quite
limited yet :
- no flash writes/erases are implemented
- ECC fixes are not implemented
- powerdown is not implemented
- IPL handling is not yet done
On the brighter side, the chip reading does work.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/devices/Kconfig | 10 | ||||
-rw-r--r-- | drivers/mtd/devices/Makefile | 3 | ||||
-rw-r--r-- | drivers/mtd/devices/docg3.c | 1114 | ||||
-rw-r--r-- | drivers/mtd/devices/docg3.h | 297 |
4 files changed, 1424 insertions, 0 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 35081ce77fbd..6d91a1f049c8 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -249,6 +249,16 @@ config MTD_DOC2001PLUS under "NAND Flash Device Drivers" (currently that driver does not support all Millennium Plus devices). +config MTD_DOCG3 + tristate "M-Systems Disk-On-Chip G3" + ---help--- + This provides an MTD device driver for the M-Systems DiskOnChip + G3 devices. + + The driver provides access to G3 DiskOnChip, distributed by + M-Systems and now Sandisk. The support is very experimental, + and doesn't give access to any write operations. + config MTD_DOCPROBE tristate select MTD_DOCECC diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index f3226b1d38fc..56c7cd462f11 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_MTD_DOC2000) += doc2000.o obj-$(CONFIG_MTD_DOC2001) += doc2001.o obj-$(CONFIG_MTD_DOC2001PLUS) += doc2001plus.o +obj-$(CONFIG_MTD_DOCG3) += docg3.o obj-$(CONFIG_MTD_DOCPROBE) += docprobe.o obj-$(CONFIG_MTD_DOCECC) += docecc.o obj-$(CONFIG_MTD_SLRAM) += slram.o @@ -17,3 +18,5 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o obj-$(CONFIG_MTD_SST25L) += sst25l.o + +CFLAGS_docg3.o += -I$(src)
\ No newline at end of file diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c new file mode 100644 index 000000000000..bdcf5df982e8 --- /dev/null +++ b/drivers/mtd/devices/docg3.c @@ -0,0 +1,1114 @@ +/* + * Handles the M-Systems DiskOnChip G3 chip + * + * Copyright (C) 2011 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/platform_device.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +#define CREATE_TRACE_POINTS +#include "docg3.h" + +/* + * This driver handles the DiskOnChip G3 flash memory. + * + * As no specification is available from M-Systems/Sandisk, this drivers lacks + * several functions available on the chip, as : + * - block erase + * - page write + * - IPL write + * - ECC fixing (lack of BCH algorith understanding) + * - powerdown / powerup + * + * The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and + * the driver assumes a 16bits data bus. + * + * DocG3 relies on 2 ECC algorithms, which are handled in hardware : + * - a 1 byte Hamming code stored in the OOB for each page + * - a 7 bytes BCH code stored in the OOB for each page + * The BCH part is only used for check purpose, no correction is available as + * some information is missing. What is known is that : + * - BCH is in GF(2^14) + * - BCH is over data of 520 bytes (512 page + 7 page_info bytes + * + 1 hamming byte) + * - BCH can correct up to 4 bits (t = 4) + * - BCH syndroms are calculated in hardware, and checked in hardware as well + * + */ + +static inline u8 doc_readb(struct docg3 *docg3, u16 reg) +{ + u8 val = readb(docg3->base + reg); + + trace_docg3_io(0, 8, reg, (int)val); + return val; +} + +static inline u16 doc_readw(struct docg3 *docg3, u16 reg) +{ + u16 val = readw(docg3->base + reg); + + trace_docg3_io(0, 16, reg, (int)val); + return val; +} + +static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg) +{ + writeb(val, docg3->base + reg); + trace_docg3_io(1, 16, reg, val); +} + +static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg) +{ + writew(val, docg3->base + reg); + trace_docg3_io(1, 16, reg, val); +} + +static inline void doc_flash_command(struct docg3 *docg3, u8 cmd) +{ + doc_writeb(docg3, cmd, DOC_FLASHCOMMAND); +} + +static inline void doc_flash_sequence(struct docg3 *docg3, u8 seq) +{ + doc_writeb(docg3, seq, DOC_FLASHSEQUENCE); +} + +static inline void doc_flash_address(struct docg3 *docg3, u8 addr) +{ + doc_writeb(docg3, addr, DOC_FLASHADDRESS); +} + +static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL }; + +static int doc_register_readb(struct docg3 *docg3, int reg) +{ + u8 val; + + doc_writew(docg3, reg, DOC_READADDRESS); + val = doc_readb(docg3, reg); + doc_vdbg("Read register %04x : %02x\n", reg, val); + return val; +} + +static int doc_register_readw(struct docg3 *docg3, int reg) +{ + u16 val; + + doc_writew(docg3, reg, DOC_READADDRESS); + val = doc_readw(docg3, reg); + doc_vdbg("Read register %04x : %04x\n", reg, val); + return val; +} + +/** + * doc_delay - delay docg3 operations + * @docg3: the device + * @nbNOPs: the number of NOPs to issue + * + * As no specification is available, the right timings between chip commands are + * unknown. The only available piece of information are the observed nops on a + * working docg3 chip. + * Therefore, doc_delay relies on a busy loop of NOPs, instead of scheduler + * friendlier msleep() functions or blocking mdelay(). + */ +static void doc_delay(struct docg3 *docg3, int nbNOPs) +{ + int i; + + doc_dbg("NOP x %d\n", nbNOPs); + for (i = 0; i < nbNOPs; i++) + doc_writeb(docg3, 0, DOC_NOP); +} + +static int is_prot_seq_error(struct docg3 *docg3) +{ + int ctrl; + + ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + return ctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR); +} + +static int doc_is_ready(struct docg3 *docg3) +{ + int ctrl; + + ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + return ctrl & DOC_CTRL_FLASHREADY; +} + +static int doc_wait_ready(struct docg3 *docg3) +{ + int maxWaitCycles = 100; + + do { + doc_delay(docg3, 4); + cpu_relax(); + } while (!doc_is_ready(docg3) && maxWaitCycles--); + doc_delay(docg3, 2); + if (maxWaitCycles > 0) + return 0; + else + return -EIO; +} + +static int doc_reset_seq(struct docg3 *docg3) +{ + int ret; + + doc_writeb(docg3, 0x10, DOC_FLASHCONTROL); + doc_flash_sequence(docg3, DOC_SEQ_RESET); + doc_flash_command(docg3, DOC_CMD_RESET); + doc_delay(docg3, 2); + ret = doc_wait_ready(docg3); + + doc_dbg("doc_reset_seq() -> isReady=%s\n", ret ? "false" : "true"); + return ret; +} + +/** + * doc_read_data_area - Read data from data area + * @docg3: the device + * @buf: the buffer to fill in + * @len: the lenght to read + * @first: first time read, DOC_READADDRESS should be set + * + * Reads bytes from flash data. Handles the single byte / even bytes reads. + */ +static void doc_read_data_area(struct docg3 *docg3, void *buf, int len, + int first) +{ + int i, cdr, len4; + u16 data16, *dst16; + u8 data8, *dst8; + + doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len); + cdr = len & 0x3; + len4 = len - cdr; + + if (first) + doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS); + dst16 = buf; + for (i = 0; i < len4; i += 2) { + data16 = doc_readw(docg3, DOC_IOSPACE_DATA); + *dst16 = data16; + dst16++; + } + + if (cdr) { + doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE, + DOC_READADDRESS); + doc_delay(docg3, 1); + dst8 = (u8 *)dst16; + for (i = 0; i < cdr; i++) { + data8 = doc_readb(docg3, DOC_IOSPACE_DATA); + *dst8 = data8; + dst8++; + } + } +} + +/** + * doc_set_data_mode - Sets the flash to reliable data mode + * @docg3: the device + * + * The reliable data mode is a bit slower than the fast mode, but less errors + * occur. Entering the reliable mode cannot be done without entering the fast + * mode first. + */ +static void doc_set_reliable_mode(struct docg3 *docg3) +{ + doc_dbg("doc_set_reliable_mode()\n"); + doc_flash_sequence(docg3, DOC_SEQ_SET_MODE); + doc_flash_command(docg3, DOC_CMD_FAST_MODE); + doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE); + doc_delay(docg3, 2); +} + +/** + * doc_set_asic_mode - Set the ASIC mode + * @docg3: the device + * @mode: the mode + * + * The ASIC can work in 3 modes : + * - RESET: all registers are zeroed + * - NORMAL: receives and handles commands + * - POWERDOWN: minimal poweruse, flash parts shut off + */ +static void doc_set_asic_mode(struct docg3 *docg3, u8 mode) +{ + int i; + + for (i = 0; i < 12; i++) + doc_readb(docg3, DOC_IOSPACE_IPL); + + mode |= DOC_ASICMODE_MDWREN; + doc_dbg("doc_set_asic_mode(%02x)\n", mode); + doc_writeb(docg3, mode, DOC_ASICMODE); + doc_writeb(docg3, ~mode, DOC_ASICMODECONFIRM); + doc_delay(docg3, 1); +} + +/** + * doc_set_device_id - Sets the devices id for cascaded G3 chips + * @docg3: the device + * @id: the chip to select (amongst 0, 1, 2, 3) + * + * There can be 4 cascaded G3 chips. This function selects the one which will + * should be the active one. + */ +static void doc_set_device_id(struct docg3 *docg3, int id) +{ + u8 ctrl; + + doc_dbg("doc_set_device_id(%d)\n", id); + doc_writeb(docg3, id, DOC_DEVICESELECT); + ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + + ctrl &= ~DOC_CTRL_VIOLATION; + ctrl |= DOC_CTRL_CE; + doc_writeb(docg3, ctrl, DOC_FLASHCONTROL); +} + +/** + * doc_set_extra_page_mode - Change flash page layout + * @docg3: the device + * + * Normally, the flash page is split into the data (512 bytes) and the out of + * band data (16 bytes). For each, 4 more bytes can be accessed, where the wear + * leveling counters are stored. To access this last area of 4 bytes, a special + * mode must be input to the flash ASIC. + * + * Returns 0 if no error occured, -EIO else. + */ +static int doc_set_extra_page_mode(struct docg3 *docg3) +{ + int fctrl; + + doc_dbg("doc_set_extra_page_mode()\n"); + doc_flash_sequence(docg3, DOC_SEQ_PAGE_SIZE_532); + doc_flash_command(docg3, DOC_CMD_PAGE_SIZE_532); + doc_delay(docg3, 2); + + fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + if (fctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR)) + return -EIO; + else + return 0; +} + +/** + * doc_seek - Set both flash planes to the specified block, page for reading + * @docg3: the device + * @block0: the first plane block index + * @block1: the second plane block index + * @page: the page index within the block + * @wear: if true, read will occur on the 4 extra bytes of the wear area + * @ofs: offset in page to read + * + * Programs the flash even and odd planes to the specific block and page. + * Alternatively, programs the flash to the wear area of the specified page. + */ +static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page, + int wear, int ofs) +{ + int sector, ret = 0; + + doc_dbg("doc_seek(blocks=(%d,%d), page=%d, ofs=%d, wear=%d)\n", + block0, block1, page, ofs, wear); + + if (!wear && (ofs < 2 * DOC_LAYOUT_PAGE_SIZE)) { + doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1); + doc_flash_command(docg3, DOC_CMD_READ_PLANE1); + doc_delay(docg3, 2); + } else { + doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2); + doc_flash_command(docg3, DOC_CMD_READ_PLANE2); + doc_delay(docg3, 2); + } + + doc_set_reliable_mode(docg3); + if (wear) + ret = doc_set_extra_page_mode(docg3); + if (ret) + goto out; + + sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); + doc_flash_sequence(docg3, DOC_SEQ_READ); + doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR); + doc_delay(docg3, 1); + doc_flash_address(docg3, sector & 0xff); + doc_flash_address(docg3, (sector >> 8) & 0xff); + doc_flash_address(docg3, (sector >> 16) & 0xff); + doc_delay(docg3, 1); + + sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); + doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR); + doc_delay(docg3, 1); + doc_flash_address(docg3, sector & 0xff); + doc_flash_address(docg3, (sector >> 8) & 0xff); + doc_flash_address(docg3, (sector >> 16) & 0xff); + doc_delay(docg3, 2); + +out: + return ret; +} + +/** + * doc_read_page_ecc_init - Initialize hardware ECC engine + * @docg3: the device + * @len: the number of bytes covered by the ECC (BCH covered) + * + * The function does initialize the hardware ECC engine to compute the Hamming + * ECC (on 1 byte) and the BCH Syndroms (on 7 bytes). + * + * Return 0 if succeeded, -EIO on error + */ +static int doc_read_page_ecc_init(struct docg3 *docg3, int len) +{ + doc_writew(docg3, DOC_ECCCONF0_READ_MODE + | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE + | (len & DOC_ECCCONF0_DATA_BYTES_MASK), + DOC_ECCCONF0); + doc_delay(docg3, 4); + doc_register_readb(docg3, DOC_FLASHCONTROL); + return doc_wait_ready(docg3); +} + +/** + * doc_read_page_prepare - Prepares reading data from a flash page + * @docg3: the device + * @block0: the first plane block index on flash memory + * @block1: the second plane block index on flash memory + * @page: the page index in the block + * @offset: the offset in the page (must be a multiple of 4) + * + * Prepares the page to be read in the flash memory : + * - tell ASIC to map the flash pages + * - tell ASIC to be in read mode + * + * After a call to this method, a call to doc_read_page_finish is mandatory, + * to end the read cycle of the flash. + * + * Read data from a flash page. The length to be read must be between 0 and + * (page_size + oob_size + wear_size), ie. 532, and a multiple of 4 (because + * the extra bytes reading is not implemented). + * + * As pages are grouped by 2 (in 2 planes), reading from a page must be done + * in two steps: + * - one read of 512 bytes at offset 0 + * - one read of 512 bytes at offset 512 + 16 + * + * Returns 0 if successful, -EIO if a read error occured. + */ +static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1, + int page, int offset) +{ + int wear_area = 0, ret = 0; + + doc_dbg("doc_read_page_prepare(blocks=(%d,%d), page=%d, ofsInPage=%d)\n", + block0, block1, page, offset); + if (offset >= DOC_LAYOUT_WEAR_OFFSET) + wear_area = 1; + if (!wear_area && offset > (DOC_LAYOUT_PAGE_OOB_SIZE * 2)) + return -EINVAL; + + doc_set_device_id(docg3, docg3->device_id); + ret = doc_reset_seq(docg3); + if (ret) + goto err; + + /* Program the flash address block and page */ + ret = doc_read_seek(docg3, block0, block1, page, wear_area, offset); + if (ret) + goto err; + + doc_flash_command(docg3, DOC_CMD_READ_ALL_PLANES); + doc_delay(docg3, 2); + doc_wait_ready(docg3); + + doc_flash_command(docg3, DOC_CMD_SET_ADDR_READ); + doc_delay(docg3, 1); + if (offset >= DOC_LAYOUT_PAGE_SIZE * 2) + offset -= 2 * DOC_LAYOUT_PAGE_SIZE; + doc_flash_address(docg3, offset >> 2); + doc_delay(docg3, 1); + doc_wait_ready(docg3); + + doc_flash_command(docg3, DOC_CMD_READ_FLASH); + + return 0; +err: + doc_writeb(docg3, 0, DOC_DATAEND); + doc_delay(docg3, 2); + return -EIO; +} + +/** + * doc_read_page_getbytes - Reads bytes from a prepared page + * @docg3: the device + * @len: the number of bytes to be read (must be a multiple of 4) + * @buf: the buffer to be filled in + * @first: 1 if first time read, DOC_READADDRESS should be set + * + */ +static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf, + int first) +{ + doc_read_data_area(docg3, buf, len, first); + doc_delay(docg3, 2); + return len; +} + +/** + * doc_get_hw_bch_syndroms - Get hardware calculated BCH syndroms + * @docg3: the device + * @syns: the array of 7 integers where the syndroms will be stored + */ +static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns) +{ + int i; + + for (i = 0; i < DOC_ECC_BCH_SIZE; i++) + syns[i] = doc_register_readb(docg3, DOC_BCH_SYNDROM(i)); +} + +/** + * doc_read_page_finish - Ends reading of a flash page + * @docg3: the device + * + * As a side effect, resets the chip selector to 0. This ensures that after each + * read operation, the floor 0 is selected. Therefore, if the systems halts, the + * reboot will boot on floor 0, where the IPL is. + */ +static void doc_read_page_finish(struct docg3 *docg3) +{ + doc_writeb(docg3, 0, DOC_DATAEND); + doc_delay(docg3, 2); + doc_set_device_id(docg3, 0); +} + +/** + * calc_block_sector - Calculate blocks, pages and ofs. + + * @from: offset in flash + * @block0: first plane block index calculated + * @block1: second plane block index calculated + * @page: page calculated + * @ofs: offset in page + */ +static void calc_block_sector(loff_t from, int *block0, int *block1, int *page, + int *ofs) +{ + uint sector; + + sector = from / DOC_LAYOUT_PAGE_SIZE; + *block0 = sector / (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES) + * DOC_LAYOUT_NBPLANES; + *block1 = *block0 + 1; + *page = sector % (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES); + *page /= DOC_LAYOUT_NBPLANES; + if (sector % 2) + *ofs = DOC_LAYOUT_PAGE_OOB_SIZE; + else + *ofs = 0; +} + +/** + * doc_read - Read bytes from flash + * @mtd: the device + * @from: the offset from first block and first page, in bytes, aligned on page + * size + * @len: the number of bytes to read (must be a multiple of 4) + * @retlen: the number of bytes actually read + * @buf: the filled in buffer + * + * Reads flash memory pages. This function does not read the OOB chunk, but only + * the page data. + * + * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured + */ +static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct docg3 *docg3 = mtd->priv; + int block0, block1, page, readlen, ret, ofs = 0; + int syn[DOC_ECC_BCH_SIZE], eccconf1; + u8 oob[DOC_LAYOUT_OOB_SIZE]; + + ret = -EINVAL; + doc_dbg("doc_read(from=%lld, len=%zu, buf=%p)\n", from, len, buf); + if (from % DOC_LAYOUT_PAGE_SIZE) + goto err; + if (len % 4) + goto err; + calc_block_sector(from, &block0, &block1, &page, &ofs); + if (block1 > docg3->max_block) + goto err; + + *retlen = 0; + ret = 0; + readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE); + while (!ret && len > 0) { + readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE); + ret = doc_read_page_prepare(docg3, block0, block1, page, ofs); + if (ret < 0) + goto err; + ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_COVERED_BYTES); + if (ret < 0) + goto err_in_read; + ret = doc_read_page_getbytes(docg3, readlen, buf, 1); + if (ret < readlen) + goto err_in_read; + ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE, + oob, 0); + if (ret < DOC_LAYOUT_OOB_SIZE) + goto err_in_read; + + *retlen += readlen; + buf += readlen; + len -= readlen; + + ofs ^= DOC_LAYOUT_PAGE_OOB_SIZE; + if (ofs == 0) + page += 2; + if (page > DOC_ADDR_PAGE_MASK) { + page = 0; + block0 += 2; + block1 += 2; + } + + /* + * There should be a BCH bitstream fixing algorithm here ... + * By now, a page read failure is triggered by BCH error + */ + doc_get_hw_bch_syndroms(docg3, syn); + eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1); + + doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", + oob[0], oob[1], oob[2], oob[3], oob[4], + oob[5], oob[6]); + doc_dbg("OOB - HAMMING: %02x\n", oob[7]); + doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", + oob[8], oob[9], oob[10], oob[11], oob[12], + oob[13], oob[14]); + doc_dbg("OOB - UNUSED: %02x\n", oob[15]); + doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1); + doc_dbg("ECC BCH syndrom: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", + syn[0], syn[1], syn[2], syn[3], syn[4], syn[5], syn[6]); + + ret = -EBADMSG; + if (block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) { + if (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR) + goto err_in_read; + if (is_prot_seq_error(docg3)) + goto err_in_read; + } + doc_read_page_finish(docg3); + } + + return 0; +err_in_read: + doc_read_page_finish(docg3); +err: + return ret; +} + +/** + * doc_read_oob - Read out of band bytes from flash + * @mtd: the device + * @from: the offset from first block and first page, in bytes, aligned on page + * size + * @ops: the mtd oob structure + * + * Reads flash memory OOB area of pages. + * + * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured + */ +static int doc_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct docg3 *docg3 = mtd->priv; + int block0, block1, page, ofs, ret; + u8 *buf = ops->oobbuf; + size_t len = ops->ooblen; + + doc_dbg("doc_read_oob(from=%lld, buf=%p, len=%zu)\n", from, buf, len); + if (len != DOC_LAYOUT_OOB_SIZE) + return -EINVAL; + + switch (ops->mode) { + case MTD_OPS_PLACE_OOB: + buf += ops->ooboffs; + break; + default: + break; + } + + calc_block_sector(from, &block0, &block1, &page, &ofs); + if (block1 > docg3->max_block) + return -EINVAL; + + ret = doc_read_page_prepare(docg3, block0, block1, page, + ofs + DOC_LAYOUT_PAGE_SIZE); + if (!ret) + ret = doc_read_page_ecc_init(docg3, DOC_LAYOUT_OOB_SIZE); + if (!ret) + ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE, + buf, 1); + doc_read_page_finish(docg3); + + if (ret > 0) + ops->oobretlen = ret; + else + ops->oobretlen = 0; + return (ret > 0) ? 0 : ret; +} + +static int doc_reload_bbt(struct docg3 *docg3) +{ + int block = DOC_LAYOUT_BLOCK_BBT; + int ret = 0, nbpages, page; + u_char *buf = docg3->bbt; + + nbpages = DIV_ROUND_UP(docg3->max_block + 1, 8 * DOC_LAYOUT_PAGE_SIZE); + for (page = 0; !ret && (page < nbpages); page++) { + ret = doc_read_page_prepare(docg3, block, block + 1, + page + DOC_LAYOUT_PAGE_BBT, 0); + if (!ret) + ret = doc_read_page_ecc_init(docg3, + DOC_LAYOUT_PAGE_SIZE); + if (!ret) + doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE, + buf, 1); + buf += DOC_LAYOUT_PAGE_SIZE; + } + doc_read_page_finish(docg3); + return ret; +} + +/** + * doc_block_isbad - Checks whether a block is good or not + * @mtd: the device + * @from: the offset to find the correct block + * + * Returns 1 if block is bad, 0 if block is good + */ +static int doc_block_isbad(struct mtd_info *mtd, loff_t from) +{ + struct docg3 *docg3 = mtd->priv; + int block0, block1, page, ofs, is_good; + + calc_block_sector(from, &block0, &block1, &page, &ofs); + doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n", + from, block0, block1, page, ofs); + + if (block0 < DOC_LAYOUT_BLOCK_FIRST_DATA) + return 0; + if (block1 > docg3->max_block) + return -EINVAL; + + is_good = docg3->bbt[block0 >> 3] & (1 << (block0 & 0x7)); + return !is_good; +} + +/** + * doc_get_erase_count - Get block erase count + * @docg3: the device + * @from: the offset in which the block is. + * + * Get the number of times a block was erased. The number is the maximum of + * erase times between first and second plane (which should be equal normally). + * + * Returns The number of erases, or -EINVAL or -EIO on error. + */ +static int doc_get_erase_count(struct docg3 *docg3, loff_t from) +{ + u8 buf[DOC_LAYOUT_WEAR_SIZE]; + int ret, plane1_erase_count, plane2_erase_count; + int block0, block1, page, ofs; + + doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf); + if (from % DOC_LAYOUT_PAGE_SIZE) + return -EINVAL; + calc_block_sector(from, &block0, &block1, &page, &ofs); + if (block1 > docg3->max_block) + return -EINVAL; + + ret = doc_reset_seq(docg3); + if (!ret) + ret = doc_read_page_prepare(docg3, block0, block1, page, + ofs + DOC_LAYOUT_WEAR_OFFSET); + if (!ret) + ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE, + buf, 1); + doc_read_page_finish(docg3); + + if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK)) + return -EIO; + plane1_erase_count = (u8)(~buf[1]) | ((u8)(~buf[4]) << 8) + | ((u8)(~buf[5]) << 16); + plane2_erase_count = (u8)(~buf[3]) | ((u8)(~buf[6]) << 8) + | ((u8)(~buf[7]) << 16); + + return max(plane1_erase_count, plane2_erase_count); +} + +/* + * Debug sysfs entries + */ +static int dbg_flashctrl_show(struct seq_file *s, void *p) +{ + struct docg3 *docg3 = (struct docg3 *)s->private; + + int pos = 0; + u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + + pos += seq_printf(s, + "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n", + fctrl, + fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-", + fctrl & DOC_CTRL_CE ? "active" : "inactive", + fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-", + fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-", + fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready"); + return pos; +} +DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show); + +static int dbg_asicmode_show(struct seq_file *s, void *p) +{ + struct docg3 *docg3 = (struct docg3 *)s->private; + + int pos = 0; + int pctrl = doc_register_readb(docg3, DOC_ASICMODE); + int mode = pctrl & 0x03; + + pos += seq_printf(s, + "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (", + pctrl, + pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0, + pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0, + pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0, + pctrl & DOC_ASICMODE_MDWREN ? 1 : 0, + pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0, + mode >> 1, mode & 0x1); + + switch (mode) { + case DOC_ASICMODE_RESET: + pos += seq_printf(s, "reset"); + break; + case DOC_ASICMODE_NORMAL: + pos += seq_printf(s, "normal"); + break; + case DOC_ASICMODE_POWERDOWN: + pos += seq_printf(s, "powerdown"); + break; + } + pos += seq_printf(s, ")\n"); + return pos; +} +DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show); + +static int dbg_device_id_show(struct seq_file *s, void *p) +{ + struct docg3 *docg3 = (struct docg3 *)s->private; + int pos = 0; + int id = doc_register_readb(docg3, DOC_DEVICESELECT); + + pos += seq_printf(s, "DeviceId = %d\n", id); + return pos; +} +DEBUGFS_RO_ATTR(device_id, dbg_device_id_show); + +static int dbg_protection_show(struct seq_file *s, void *p) +{ + struct docg3 *docg3 = (struct docg3 *)s->private; + int pos = 0; + int protect = doc_register_readb(docg3, DOC_PROTECTION); + int dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS); + int dps0_low = doc_register_readb(docg3, DOC_DPS0_ADDRLOW); + int dps0_high = doc_register_readb(docg3, DOC_DPS0_ADDRHIGH); + int dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS); + int dps1_low = doc_register_readb(docg3, DOC_DPS1_ADDRLOW); + int dps1_high = doc_register_readb(docg3, DOC_DPS1_ADDRHIGH); + + pos += seq_printf(s, "Protection = 0x%02x (", + protect); + if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK) + pos += seq_printf(s, "FOUNDRY_OTP_LOCK,"); + if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK) + pos += seq_printf(s, "CUSTOMER_OTP_LOCK,"); + if (protect & DOC_PROTECT_LOCK_INPUT) + pos += seq_printf(s, "LOCK_INPUT,"); + if (protect & DOC_PROTECT_STICKY_LOCK) + pos += seq_printf(s, "STICKY_LOCK,"); + if (protect & DOC_PROTECT_PROTECTION_ENABLED) + pos += seq_printf(s, "PROTECTION ON,"); + if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK) + pos += seq_printf(s, "IPL_DOWNLOAD_LOCK,"); + if (protect & DOC_PROTECT_PROTECTION_ERROR) + pos += seq_printf(s, "PROTECT_ERR,"); + else + pos += seq_printf(s, "NO_PROTECT_ERR"); + pos += seq_printf(s, ")\n"); + + pos += seq_printf(s, "DPS0 = 0x%02x : " + "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, " + "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n", + dps0, dps0_low, dps0_high, + !!(dps0 & DOC_DPS_OTP_PROTECTED), + !!(dps0 & DOC_DPS_READ_PROTECTED), + !!(dps0 & DOC_DPS_WRITE_PROTECTED), + !!(dps0 & DOC_DPS_HW_LOCK_ENABLED), + !!(dps0 & DOC_DPS_KEY_OK)); + pos += seq_printf(s, "DPS1 = 0x%02x : " + "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, " + "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n", + dps1, dps1_low, dps1_high, + !!(dps1 & DOC_DPS_OTP_PROTECTED), + !!(dps1 & DOC_DPS_READ_PROTECTED), + !!(dps1 & DOC_DPS_WRITE_PROTECTED), + !!(dps1 & DOC_DPS_HW_LOCK_ENABLED), + !!(dps1 & DOC_DPS_KEY_OK)); + return pos; +} +DEBUGFS_RO_ATTR(protection, dbg_protection_show); + +static int __init doc_dbg_register(struct docg3 *docg3) +{ + struct dentry *root, *entry; + + root = debugfs_create_dir("docg3", NULL); + if (!root) + return -ENOMEM; + + entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3, + &flashcontrol_fops); + if (entry) + entry = debugfs_create_file("asic_mode", S_IRUSR, root, + docg3, &asic_mode_fops); + if (entry) + entry = debugfs_create_file("device_id", S_IRUSR, root, + docg3, &device_id_fops); + if (entry) + entry = debugfs_create_file("protection", S_IRUSR, root, + docg3, &protection_fops); + if (entry) { + docg3->debugfs_root = root; + return 0; + } else { + debugfs_remove_recursive(root); + return -ENOMEM; + } +} + +static void __exit doc_dbg_unregister(struct docg3 *docg3) +{ + debugfs_remove_recursive(docg3->debugfs_root); +} + +/** + * doc_set_driver_info - Fill the mtd_info structure and docg3 structure + * @chip_id: The chip ID of the supported chip + * @mtd: The structure to fill + */ +static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) +{ + struct docg3 *docg3 = mtd->priv; + int cfg; + + cfg = doc_register_readb(docg3, DOC_CONFIGURATION); + docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0); + + switch (chip_id) { + case DOC_CHIPID_G3: + mtd->name = "DiskOnChip G3"; + docg3->max_block = 2047; + break; + } + mtd->type = MTD_NANDFLASH; + /* + * Once write methods are added, the correct flags will be set. + * mtd->flags = MTD_CAP_NANDFLASH; + */ + mtd->flags = MTD_CAP_ROM; + mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE; + mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES; + mtd->writesize = DOC_LAYOUT_PAGE_SIZE; + mtd->oobsize = DOC_LAYOUT_OOB_SIZE; + mtd->owner = THIS_MODULE; + mtd->erase = NULL; + mtd->point = NULL; + mtd->unpoint = NULL; + mtd->read = doc_read; + mtd->write = NULL; + mtd->read_oob = doc_read_oob; + mtd->write_oob = NULL; + mtd->sync = NULL; + mtd->block_isbad = doc_block_isbad; +} + +/** + * doc_probe - Probe the IO space for a DiskOnChip G3 chip + * @pdev: platform device + * + * Probes for a G3 chip at the specified IO space in the platform data + * ressources. + * + * Returns 0 on success, -ENOMEM, -ENXIO on error + */ +static int __init docg3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct docg3 *docg3; + struct mtd_info *mtd; + struct resource *ress; + int ret, bbt_nbpages; + u16 chip_id, chip_id_inv; + + ret = -ENOMEM; + docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL); + if (!docg3) + goto nomem1; + mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd) + goto nomem2; + mtd->priv = docg3; + + ret = -ENXIO; + ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!ress) { + dev_err(dev, "No I/O memory resource defined\n"); + goto noress; + } + docg3->base = ioremap(ress->start, DOC_IOSPACE_SIZE); + + docg3->dev = &pdev->dev; + docg3->device_id = 0; + doc_set_device_id(docg3, docg3->device_id); + doc_set_asic_mode(docg3, DOC_ASICMODE_RESET); + doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL); + + chip_id = doc_register_readw(docg3, DOC_CHIPID); + chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV); + + ret = -ENODEV; + if (chip_id != (u16)(~chip_id_inv)) { + doc_info("No device found at IO addr %p\n", + (void *)ress->start); + goto nochipfound; + } + + switch (chip_id) { + case DOC_CHIPID_G3: + doc_info("Found a G3 DiskOnChip at addr %p\n", + (void *)ress->start); + break; + default: + doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id); + goto nochipfound; + } + + doc_set_driver_info(chip_id, mtd); + platform_set_drvdata(pdev, mtd); + + ret = -ENOMEM; + bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1, + 8 * DOC_LAYOUT_PAGE_SIZE); + docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL); + if (!docg3->bbt) + goto nochipfound; + doc_reload_bbt(docg3); + + ret = mtd_device_parse_register(mtd, part_probes, + NULL, NULL, 0); + if (ret) + goto register_error; + + doc_dbg_register(docg3); + return 0; + +register_error: + kfree(docg3->bbt); +nochipfound: + iounmap(docg3->base); +noress: + kfree(mtd); +nomem2: + kfree(docg3); +nomem1: + return ret; +} + +/** + * docg3_release - Release the driver + * @pdev: the platform device + * + * Returns 0 + */ +static int __exit docg3_release(struct platform_device *pdev) +{ + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct docg3 *docg3 = mtd->priv; + + doc_dbg_unregister(docg3); + mtd_device_unregister(mtd); + iounmap(docg3->base); + kfree(docg3->bbt); + kfree(docg3); + kfree(mtd); + return 0; +} + +static struct platform_driver g3_driver = { + .driver = { + .name = "docg3", + .owner = THIS_MODULE, + }, + .remove = __exit_p(docg3_release), +}; + +static int __init docg3_init(void) +{ + return platform_driver_probe(&g3_driver, docg3_probe); +} +module_init(docg3_init); + + +static void __exit docg3_exit(void) +{ + platform_driver_unregister(&g3_driver); +} +module_exit(docg3_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>"); +MODULE_DESCRIPTION("MTD driver for DiskOnChip G3"); diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h new file mode 100644 index 000000000000..0d407be24594 --- /dev/null +++ b/drivers/mtd/devices/docg3.h @@ -0,0 +1,297 @@ +/* + * Handles the M-Systems DiskOnChip G3 chip + * + * Copyright (C) 2011 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _MTD_DOCG3_H +#define _MTD_DOCG3_H + +/* + * Flash memory areas : + * - 0x0000 .. 0x07ff : IPL + * - 0x0800 .. 0x0fff : Data area + * - 0x1000 .. 0x17ff : Registers + * - 0x1800 .. 0x1fff : Unknown + */ +#define DOC_IOSPACE_IPL 0x0000 +#define DOC_IOSPACE_DATA 0x0800 +#define DOC_IOSPACE_SIZE 0x2000 + +/* + * DOC G3 layout and adressing scheme + * A page address for the block "b", plane "P" and page "p": + * address = [bbbb bPpp pppp] + */ + +#define DOC_ADDR_PAGE_MASK 0x3f +#define DOC_ADDR_BLOCK_SHIFT 6 +#define DOC_LAYOUT_NBPLANES 2 +#define DOC_LAYOUT_PAGES_PER_BLOCK 64 +#define DOC_LAYOUT_PAGE_SIZE 512 +#define DOC_LAYOUT_OOB_SIZE 16 +#define DOC_LAYOUT_WEAR_SIZE 8 +#define DOC_LAYOUT_PAGE_OOB_SIZE \ + (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE) +#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2) +#define DOC_LAYOUT_BLOCK_SIZE \ + (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE) +#define DOC_ECC_BCH_SIZE 7 +#define DOC_ECC_BCH_COVERED_BYTES \ + (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \ + DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ) + +/* + * Blocks distribution + */ +#define DOC_LAYOUT_BLOCK_BBT 0 +#define DOC_LAYOUT_BLOCK_OTP 0 +#define DOC_LAYOUT_BLOCK_FIRST_DATA 6 + +#define DOC_LAYOUT_PAGE_BBT 4 + +/* + * Extra page OOB (16 bytes wide) layout + */ +#define DOC_LAYOUT_OOB_PAGEINFO_OFS 0 +#define DOC_LAYOUT_OOB_HAMMING_OFS 7 +#define DOC_LAYOUT_OOB_BCH_OFS 8 +#define DOC_LAYOUT_OOB_UNUSED_OFS 15 +#define DOC_LAYOUT_OOB_PAGEINFO_SZ 7 +#define DOC_LAYOUT_OOB_HAMMING_SZ 1 +#define DOC_LAYOUT_OOB_BCH_SZ 7 +#define DOC_LAYOUT_OOB_UNUSED_SZ 1 + + +#define DOC_CHIPID_G3 0x200 +#define DOC_ERASE_MARK 0xaa +/* + * Flash registers + */ +#define DOC_CHIPID 0x1000 +#define DOC_TEST 0x1004 +#define DOC_BUSLOCK 0x1006 +#define DOC_ENDIANCONTROL 0x1008 +#define DOC_DEVICESELECT 0x100a +#define DOC_ASICMODE 0x100c +#define DOC_CONFIGURATION 0x100e +#define DOC_INTERRUPTCONTROL 0x1010 +#define DOC_READADDRESS 0x101a +#define DOC_DATAEND 0x101e +#define DOC_INTERRUPTSTATUS 0x1020 + +#define DOC_FLASHSEQUENCE 0x1032 +#define DOC_FLASHCOMMAND 0x1034 +#define DOC_FLASHADDRESS 0x1036 +#define DOC_FLASHCONTROL 0x1038 +#define DOC_NOP 0x103e + +#define DOC_ECCCONF0 0x1040 +#define DOC_ECCCONF1 0x1042 +#define DOC_ECCPRESET 0x1044 +#define DOC_HAMMINGPARITY 0x1046 +#define DOC_BCH_SYNDROM(idx) (0x1048 + (idx << 1)) + +#define DOC_PROTECTION 0x1056 +#define DOC_DPS0_ADDRLOW 0x1060 +#define DOC_DPS0_ADDRHIGH 0x1062 +#define DOC_DPS1_ADDRLOW 0x1064 +#define DOC_DPS1_ADDRHIGH 0x1066 +#define DOC_DPS0_STATUS 0x106c +#define DOC_DPS1_STATUS 0x106e + +#define DOC_ASICMODECONFIRM 0x1072 +#define DOC_CHIPID_INV 0x1074 + +/* + * Flash sequences + * A sequence is preset before one or more commands are input to the chip. + */ +#define DOC_SEQ_RESET 0x00 +#define DOC_SEQ_PAGE_SIZE_532 0x03 +#define DOC_SEQ_SET_MODE 0x09 +#define DOC_SEQ_READ 0x12 +#define DOC_SEQ_SET_PLANE1 0x0e +#define DOC_SEQ_SET_PLANE2 0x10 +#define DOC_SEQ_PAGE_SETUP 0x1d + +/* + * Flash commands + */ +#define DOC_CMD_READ_PLANE1 0x00 +#define DOC_CMD_SET_ADDR_READ 0x05 +#define DOC_CMD_READ_ALL_PLANES 0x30 +#define DOC_CMD_READ_PLANE2 0x50 +#define DOC_CMD_READ_FLASH 0xe0 +#define DOC_CMD_PAGE_SIZE_532 0x3c + +#define DOC_CMD_PROG_BLOCK_ADDR 0x60 +#define DOC_CMD_PROG_CYCLE1 0x80 +#define DOC_CMD_PROG_CYCLE2 0x10 +#define DOC_CMD_ERASECYCLE2 0xd0 + +#define DOC_CMD_RELIABLE_MODE 0x22 +#define DOC_CMD_FAST_MODE 0xa2 + +#define DOC_CMD_RESET 0xff + +/* + * Flash register : DOC_FLASHCONTROL + */ +#define DOC_CTRL_VIOLATION 0x20 +#define DOC_CTRL_CE 0x10 +#define DOC_CTRL_UNKNOWN_BITS 0x08 +#define DOC_CTRL_PROTECTION_ERROR 0x04 +#define DOC_CTRL_SEQUENCE_ERROR 0x02 +#define DOC_CTRL_FLASHREADY 0x01 + +/* + * Flash register : DOC_ASICMODE + */ +#define DOC_ASICMODE_RESET 0x00 +#define DOC_ASICMODE_NORMAL 0x01 +#define DOC_ASICMODE_POWERDOWN 0x02 +#define DOC_ASICMODE_MDWREN 0x04 +#define DOC_ASICMODE_BDETCT_RESET 0x08 +#define DOC_ASICMODE_RSTIN_RESET 0x10 +#define DOC_ASICMODE_RAM_WE 0x20 + +/* + * Flash register : DOC_ECCCONF0 + */ +#define DOC_ECCCONF0_READ_MODE 0x8000 +#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000 +#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000 +#define DOC_ECCCONF0_BCH_ENABLE 0x0800 +#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff + +/* + * Flash register : DOC_ECCCONF1 + */ +#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80 +#define DOC_ECCCONF1_UNKOWN1 0x40 +#define DOC_ECCCONF1_UNKOWN2 0x20 +#define DOC_ECCCONF1_UNKOWN3 0x10 +#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f + +/* + * Flash register : DOC_PROTECTION + */ +#define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01 +#define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02 +#define DOC_PROTECT_LOCK_INPUT 0x04 +#define DOC_PROTECT_STICKY_LOCK 0x08 +#define DOC_PROTECT_PROTECTION_ENABLED 0x10 +#define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20 +#define DOC_PROTECT_PROTECTION_ERROR 0x80 + +/* + * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS + */ +#define DOC_DPS_OTP_PROTECTED 0x01 +#define DOC_DPS_READ_PROTECTED 0x02 +#define DOC_DPS_WRITE_PROTECTED 0x04 +#define DOC_DPS_HW_LOCK_ENABLED 0x08 +#define DOC_DPS_KEY_OK 0x80 + +/* + * Flash register : DOC_CONFIGURATION + */ +#define DOC_CONF_IF_CFG 0x80 +#define DOC_CONF_MAX_ID_MASK 0x30 +#define DOC_CONF_VCCQ_3V 0x01 + +/* + * Flash register : DOC_READADDRESS + */ +#define DOC_READADDR_INC 0x8000 +#define DOC_READADDR_ONE_BYTE 0x4000 +#define DOC_READADDR_ADDR_MASK 0x1fff + +/** + * struct docg3 - DiskOnChip driver private data + * @dev: the device currently under control + * @base: mapped IO space + * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3) + * @if_cfg: if true, reads are on 16bits, else reads are on 8bits + * @bbt: bad block table cache + * @debugfs_root: debugfs root node + */ +struct docg3 { + struct device *dev; + void __iomem *base; + unsigned int device_id:4; + unsigned int if_cfg:1; + int max_block; + u8 *bbt; + struct dentry *debugfs_root; +}; + +#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg) +#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg) +#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg) +#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg) + +#define DEBUGFS_RO_ATTR(name, show_fct) \ + static int name##_open(struct inode *inode, struct file *file) \ + { return single_open(file, show_fct, inode->i_private); } \ + static const struct file_operations name##_fops = { \ + .owner = THIS_MODULE, \ + .open = name##_open, \ + .llseek = seq_lseek, \ + .read = seq_read, \ + .release = single_release \ + }; +#endif + +/* + * Trace events part + */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM docg3 + +#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ) +#define _MTD_DOCG3_TRACE + +#include <linux/tracepoint.h> + +TRACE_EVENT(docg3_io, + TP_PROTO(int op, int width, u16 reg, int val), + TP_ARGS(op, width, reg, val), + TP_STRUCT__entry( + __field(int, op) + __field(unsigned char, width) + __field(u16, reg) + __field(int, val)), + TP_fast_assign( + __entry->op = op; + __entry->width = width; + __entry->reg = reg; + __entry->val = val;), + TP_printk("docg3: %s%02d reg=%04x, val=%04x", + __entry->op ? "write" : "read", __entry->width, + __entry->reg, __entry->val) + ); +#endif + +/* This part must be outside protection */ +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE docg3 +#include <trace/define_trace.h> |