Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits)
  ipw2200: Call netif_*_queue() interfaces properly.
  netxen: Needs to include linux/vmalloc.h
  [netdrvr] atl1d: fix !CONFIG_PM build
  r6040: rework init_one error handling
  r6040: bump release number to 0.18
  r6040: handle RX fifo full and no descriptor interrupts
  r6040: change the default waiting time
  r6040: use definitions for magic values in descriptor status
  r6040: completely rework the RX path
  r6040: call napi_disable when puting down the interface and set lp->dev accordingly.
  mv643xx_eth: fix NETPOLL build
  r6040: rework the RX buffers allocation routine
  r6040: fix scheduling while atomic in r6040_tx_timeout
  r6040: fix null pointer access and tx timeouts
  r6040: prefix all functions with r6040
  rndis_host: support WM6 devices as modems
  at91_ether: use netstats in net_device structure
  sfc: Create one RX queue and interrupt per CPU package by default
  sfc: Use a separate workqueue for resets
  sfc: I2C adapter initialisation fixes
  ...

1 files changed, 74 insertions, 64 deletions

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 75317a14ad1c..8a5b0d293f75 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -98,7 +98,6 @@
 #include <linux/compiler.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/ioport.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
@@ -120,11 +119,6 @@
                                  NETIF_MSG_LINK)
 
 
-/* enable PIO instead of MMIO, if CONFIG_8139TOO_PIO is selected */
-#ifdef CONFIG_8139TOO_PIO
-#define USE_IO_OPS 1
-#endif
-
 /* define to 1, 2 or 3 to enable copious debugging info */
 #define RTL8139_DEBUG 0
 
@@ -156,6 +150,13 @@
 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
    The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
 static int multicast_filter_limit = 32;
@@ -614,6 +615,8 @@ MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
 module_param(multicast_filter_limit, int, 0);
 module_param_array(media, int, NULL, 0);
 module_param_array(full_duplex, int, NULL, 0);
@@ -709,13 +712,8 @@ static void __rtl8139_cleanup_dev (struct net_device *dev)
 	assert (tp->pci_dev != NULL);
 	pdev = tp->pci_dev;
 
-#ifdef USE_IO_OPS
-	if (tp->mmio_addr)
-		ioport_unmap (tp->mmio_addr);
-#else
 	if (tp->mmio_addr)
 		pci_iounmap (pdev, tp->mmio_addr);
-#endif /* USE_IO_OPS */
 
 	/* it's ok to call this even if we have no regions to free */
 	pci_release_regions (pdev);
@@ -790,32 +788,33 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	DPRINTK("PIO region size == 0x%02X\n", pio_len);
 	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
 
-#ifdef USE_IO_OPS
-	/* make sure PCI base addr 0 is PIO */
-	if (!(pio_flags & IORESOURCE_IO)) {
-		dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-	/* check for weird/broken PCI region reporting */
-	if (pio_len < RTL_MIN_IO_SIZE) {
-		dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-#else
-	/* make sure PCI base addr 1 is MMIO */
-	if (!(mmio_flags & IORESOURCE_MEM)) {
-		dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-	if (mmio_len < RTL_MIN_IO_SIZE) {
-		dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
-		rc = -ENODEV;
-		goto err_out;
+retry:
+	if (use_io) {
+		/* make sure PCI base addr 0 is PIO */
+		if (!(pio_flags & IORESOURCE_IO)) {
+			dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		/* check for weird/broken PCI region reporting */
+		if (pio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+	} else {
+		/* make sure PCI base addr 1 is MMIO */
+		if (!(mmio_flags & IORESOURCE_MEM)) {
+			dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		if (mmio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
 	}
-#endif
 
 	rc = pci_request_regions (pdev, DRV_NAME);
 	if (rc)
@@ -825,28 +824,28 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	/* enable PCI bus-mastering */
 	pci_set_master (pdev);
 
-#ifdef USE_IO_OPS
-	ioaddr = ioport_map(pio_start, pio_len);
-	if (!ioaddr) {
-		dev_err(&pdev->dev, "cannot map PIO, aborting\n");
-		rc = -EIO;
-		goto err_out;
-	}
-	dev->base_addr = pio_start;
-	tp->mmio_addr = ioaddr;
-	tp->regs_len = pio_len;
-#else
-	/* ioremap MMIO region */
-	ioaddr = pci_iomap(pdev, 1, 0);
-	if (ioaddr == NULL) {
-		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
-		rc = -EIO;
-		goto err_out;
+	if (use_io) {
+		ioaddr = pci_iomap(pdev, 0, 0);
+		if (!ioaddr) {
+			dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+			rc = -EIO;
+			goto err_out;
+		}
+		dev->base_addr = pio_start;
+		tp->regs_len = pio_len;
+	} else {
+		/* ioremap MMIO region */
+		ioaddr = pci_iomap(pdev, 1, 0);
+		if (ioaddr == NULL) {
+			dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+			pci_release_regions(pdev);
+			use_io = 1;
+			goto retry;
+		}
+		dev->base_addr = (long) ioaddr;
+		tp->regs_len = mmio_len;
 	}
-	dev->base_addr = (long) ioaddr;
 	tp->mmio_addr = ioaddr;
-	tp->regs_len = mmio_len;
-#endif /* USE_IO_OPS */
 
 	/* Bring old chips out of low-power mode. */
 	RTL_W8 (HltClk, 'R');
@@ -952,6 +951,14 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 			   "Use the \"8139cp\" driver for improved performance and stability.\n");
 	}
 
+	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+		printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
+		use_io = 1;
+	}
+
 	i = rtl8139_init_board (pdev, &dev);
 	if (i < 0)
 		return i;
@@ -2381,20 +2388,24 @@ static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
 	np->msg_enable = datum;
 }
 
-/* TODO: we are too slack to do reg dumping for pio, for now */
-#ifdef CONFIG_8139TOO_PIO
-#define rtl8139_get_regs_len	NULL
-#define rtl8139_get_regs	NULL
-#else
 static int rtl8139_get_regs_len(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *np;
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return 0;
+	np = netdev_priv(dev);
 	return np->regs_len;
 }
 
 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *np;
+
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return;
+	np = netdev_priv(dev);
 
 	regs->version = RTL_REGS_VER;
 
@@ -2402,7 +2413,6 @@ static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	memcpy_fromio(regbuf, np->mmio_addr, regs->len);
 	spin_unlock_irq(&np->lock);
 }
-#endif /* CONFIG_8139TOO_MMIO */
 
 static int rtl8139_get_sset_count(struct net_device *dev, int sset)
 {