summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x_main.c
diff options
context:
space:
mode:
authorYaniv Rosner <yanivr@broadcom.com>2008-06-23 20:27:52 -0700
committerDavid S. Miller <davem@davemloft.net>2008-06-23 20:27:52 -0700
commitc18487ee24381b40df3b8b4f54dd13ee9367a1ce (patch)
tree0c52df7c30f0789fd7509426c38b2d1551c444b9 /drivers/net/bnx2x_main.c
parentea4e040abc72f2dbbfdd8d04e271a18593ba72c7 (diff)
downloadlinux-c18487ee24381b40df3b8b4f54dd13ee9367a1ce.tar.gz
linux-c18487ee24381b40df3b8b4f54dd13ee9367a1ce.tar.bz2
linux-c18487ee24381b40df3b8b4f54dd13ee9367a1ce.zip
bnx2x: New link code
New Link code: Moving all the link related code (including the calculations, the initialization of the MAC and PHY and the external PHY's code) into a separated file. The changes from the code that used to be part of bnx2x.c (now called bnx2x_main.c) are: - Using separate structures for link inputs and link outputs to clearly identify what was configured and what is the outcome - Adding code to read external PHY FW version and print it as part of ethtool -i - Adding code to upgrade external PHY FW from ethtool -E with special magic number - Changing the link down indication to ERR level - Adding a lock on all PHY access to prevent an interrupt and setting changes to overlap - Adding support for emulation and FPGA (small chunk of code that really helps in the lab) - Adding support for 1G on BCM8706 PHY - Adding clear debug print incase of fan failure (the PHY type is now "failure") Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x_main.c')
-rw-r--r--drivers/net/bnx2x_main.c3097
1 files changed, 325 insertions, 2772 deletions
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 70cba64732ca..7b547f03b565 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -61,6 +61,7 @@
#include "bnx2x_reg.h"
#include "bnx2x_fw_defs.h"
#include "bnx2x_hsi.h"
+#include "bnx2x_link.h"
#include "bnx2x.h"
#include "bnx2x_init.h"
@@ -174,7 +175,7 @@ static void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae,
REG_WR(bp, dmae_reg_go_c[idx], 1);
}
-static void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr,
+void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr,
u32 dst_addr, u32 len32)
{
struct dmae_command *dmae = &bp->dmae;
@@ -236,8 +237,7 @@ static void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr,
}
}
-#ifdef BNX2X_DMAE_RD
-static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
+void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
{
struct dmae_command *dmae = &bp->dmae;
int port = bp->port;
@@ -294,7 +294,6 @@ static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
*/
}
-#endif
static int bnx2x_mc_assert(struct bnx2x *bp)
{
@@ -1135,67 +1134,19 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
/* end of fast path */
-/* PHY/MAC */
+
+/* Link */
/*
* General service functions
*/
-static void bnx2x_leds_set(struct bnx2x *bp, unsigned int speed)
-{
- int port = bp->port;
-
- NIG_WR(NIG_REG_LED_MODE_P0 + port*4,
- ((bp->hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
- SHARED_HW_CFG_LED_MODE_SHIFT));
- NIG_WR(NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
-
- /* Set blinking rate to ~15.9Hz */
- NIG_WR(NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4,
- LED_BLINK_RATE_VAL);
- NIG_WR(NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port*4, 1);
-
- /* On Ax chip versions for speeds less than 10G
- LED scheme is different */
- if ((CHIP_REV(bp) == CHIP_REV_Ax) && (speed < SPEED_10000)) {
- NIG_WR(NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 1);
- NIG_WR(NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4, 0);
- NIG_WR(NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 + port*4, 1);
- }
-}
-
-static void bnx2x_leds_unset(struct bnx2x *bp)
-{
- int port = bp->port;
-
- NIG_WR(NIG_REG_LED_10G_P0 + port*4, 0);
- NIG_WR(NIG_REG_LED_MODE_P0 + port*4, SHARED_HW_CFG_LED_MAC1);
-}
-
-static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits)
-{
- u32 val = REG_RD(bp, reg);
-
- val |= bits;
- REG_WR(bp, reg, val);
- return val;
-}
-
-static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
-{
- u32 val = REG_RD(bp, reg);
-
- val &= ~bits;
- REG_WR(bp, reg, val);
- return val;
-}
-
static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
{
- u32 cnt;
u32 lock_status;
u32 resource_bit = (1 << resource);
- u8 func = bp->port;
+ u8 port = bp->port;
+ int cnt;
/* Validating that the resource is within range */
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
@@ -1206,7 +1157,7 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
}
/* Validating that the resource is not already taken */
- lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
if (lock_status & resource_bit) {
DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
lock_status, resource_bit);
@@ -1216,9 +1167,9 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
/* Try for 1 second every 5ms */
for (cnt = 0; cnt < 200; cnt++) {
/* Try to acquire the lock */
- REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4,
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8 + 4,
resource_bit);
- lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
if (lock_status & resource_bit)
return 0;
@@ -1232,7 +1183,7 @@ static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
{
u32 lock_status;
u32 resource_bit = (1 << resource);
- u8 func = bp->port;
+ u8 port = bp->port;
/* Validating that the resource is within range */
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
@@ -1243,18 +1194,41 @@ static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
}
/* Validating that the resource is currently taken */
- lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
if (!(lock_status & resource_bit)) {
DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
lock_status, resource_bit);
return -EFAULT;
}
- REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit);
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8, resource_bit);
return 0;
}
-static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+/* HW Lock for shared dual port PHYs */
+static void bnx2x_phy_hw_lock(struct bnx2x *bp)
+{
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+
+ mutex_lock(&bp->phy_mutex);
+
+ if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
+ (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+}
+
+static void bnx2x_phy_hw_unlock(struct bnx2x *bp)
+{
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+
+ if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
+ (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+
+ mutex_unlock(&bp->phy_mutex);
+}
+
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
{
/* The GPIO should be swapped if swap register is set and active */
int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
@@ -1353,1281 +1327,45 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
return 0;
}
-static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val)
-{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 tmp;
- int i, rc;
-
-/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n",
- bp->phy_addr, reg, val); */
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
-
- tmp = ((bp->phy_addr << 21) | (reg << 16) |
- (val & EMAC_MDIO_COMM_DATA) |
- EMAC_MDIO_COMM_COMMAND_WRITE_22 |
- EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
- if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
- udelay(5);
- break;
- }
- }
-
- if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("write phy register failed\n");
-
- rc = -EBUSY;
- } else {
- rc = 0;
- }
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- }
-
- return rc;
-}
-
-static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
-{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val;
- int i, rc;
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
-
- val = ((bp->phy_addr << 21) | (reg << 16) |
- EMAC_MDIO_COMM_COMMAND_READ_22 |
- EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
- if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
- val &= EMAC_MDIO_COMM_DATA;
- break;
- }
- }
-
- if (val & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("read phy register failed\n");
-
- *ret_val = 0x0;
- rc = -EBUSY;
- } else {
- *ret_val = val;
- rc = 0;
- }
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- }
-
-/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x ret_val 0x%08x\n",
- bp->phy_addr, reg, *ret_val); */
-
- return rc;
-}
-
-static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl,
- u32 phy_addr, u32 reg, u32 addr, u32 val)
-{
- u32 tmp;
- int i, rc = 0;
-
- /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
- * (a value of 49==0x31) and make sure that the AUTO poll is off
- */
- tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
- tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
- (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
- REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
-
- /* address */
- tmp = ((phy_addr << 21) | (reg << 16) | addr |
- EMAC_MDIO_COMM_COMMAND_ADDRESS |
- EMAC_MDIO_COMM_START_BUSY);
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
- if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
- udelay(5);
- break;
- }
- }
- if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("write phy register failed\n");
-
- rc = -EBUSY;
-
- } else {
- /* data */
- tmp = ((phy_addr << 21) | (reg << 16) | val |
- EMAC_MDIO_COMM_COMMAND_WRITE_45 |
- EMAC_MDIO_COMM_START_BUSY);
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
- if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
- udelay(5);
- break;
- }
- }
-
- if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("write phy register failed\n");
-
- rc = -EBUSY;
- }
- }
-
- /* unset clause 45 mode, set the MDIO clock to a faster value
- * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
- */
- tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
- tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
- tmp |= EMAC_MDIO_MODE_AUTO_POLL;
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
-
- return rc;
-}
-
-static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg,
- u32 addr, u32 val)
-{
- u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
- return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr,
- reg, addr, val);
-}
-
-static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl,
- u32 phy_addr, u32 reg, u32 addr,
- u32 *ret_val)
-{
- u32 val;
- int i, rc = 0;
-
- /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
- * (a value of 49==0x31) and make sure that the AUTO poll is off
- */
- val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
- val |= (EMAC_MDIO_MODE_CLAUSE_45 |
- (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
- REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
-
- /* address */
- val = ((phy_addr << 21) | (reg << 16) | addr |
- EMAC_MDIO_COMM_COMMAND_ADDRESS |
- EMAC_MDIO_COMM_START_BUSY);
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
- if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
- udelay(5);
- break;
- }
- }
- if (val & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("read phy register failed\n");
-
- *ret_val = 0;
- rc = -EBUSY;
-
- } else {
- /* data */
- val = ((phy_addr << 21) | (reg << 16) |
- EMAC_MDIO_COMM_COMMAND_READ_45 |
- EMAC_MDIO_COMM_START_BUSY);
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
- if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
- val &= EMAC_MDIO_COMM_DATA;
- break;
- }
- }
-
- if (val & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("read phy register failed\n");
-
- val = 0;
- rc = -EBUSY;
- }
-
- *ret_val = val;
- }
-
- /* unset clause 45 mode, set the MDIO clock to a faster value
- * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
- */
- val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
- val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
- val |= EMAC_MDIO_MODE_AUTO_POLL;
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
-
- return rc;
-}
-
-static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg,
- u32 addr, u32 *ret_val)
-{
- u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
- return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr,
- reg, addr, ret_val);
-}
-
-static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg,
- u32 addr, u32 val)
-{
- int i;
- u32 rd_val;
-
- might_sleep();
- for (i = 0; i < 10; i++) {
- bnx2x_mdio45_write(bp, phy_addr, reg, addr, val);
- msleep(5);
- bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val);
- /* if the read value is not the same as the value we wrote,
- we should write it again */
- if (rd_val == val)
- return 0;
- }
- BNX2X_ERR("MDIO write in CL45 failed\n");
- return -EBUSY;
-}
-
-/*
- * link management
- */
-
-static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result)
-{
- switch (pause_result) { /* ASYM P ASYM P */
- case 0xb: /* 1 0 1 1 */
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case 0xe: /* 1 1 1 0 */
- bp->flow_ctrl = FLOW_CTRL_RX;
- break;
-
- case 0x5: /* 0 1 0 1 */
- case 0x7: /* 0 1 1 1 */
- case 0xd: /* 1 1 0 1 */
- case 0xf: /* 1 1 1 1 */
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- break;
-
- default:
- break;
- }
-}
-
-static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp)
-{
- u32 ext_phy_addr;
- u32 ld_pause; /* local */
- u32 lp_pause; /* link partner */
- u32 an_complete; /* AN complete */
- u32 pause_result;
- u8 ret = 0;
-
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- /* read twice */
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_STATUS, &an_complete);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_STATUS, &an_complete);
-
- if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) {
- ret = 1;
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_LP_AUTO_NEG, &lp_pause);
- pause_result = (ld_pause &
- EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8;
- pause_result |= (lp_pause &
- EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10;
- DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
- pause_result);
- bnx2x_pause_resolve(bp, pause_result);
- }
- return ret;
-}
-
-static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
-{
- u32 ld_pause; /* local driver */
- u32 lp_pause; /* link partner */
- u32 pause_result;
-
- bp->flow_ctrl = 0;
-
- /* resolve from gp_status in case of AN complete and not sgmii */
- if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
- (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
- (!(bp->phy_flags & PHY_SGMII_FLAG)) &&
- (XGXS_EXT_PHY_TYPE(bp) == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) {
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
- &ld_pause);
- bnx2x_mdio22_read(bp,
- MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
- &lp_pause);
- pause_result = (ld_pause &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5;
- pause_result |= (lp_pause &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
- DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
- bnx2x_pause_resolve(bp, pause_result);
- } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) ||
- !(bnx2x_ext_phy_resove_fc(bp))) {
- /* forced speed */
- if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- else
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case FLOW_CTRL_TX:
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case FLOW_CTRL_RX:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_RX;
- break;
-
- case FLOW_CTRL_BOTH:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- else
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case FLOW_CTRL_NONE:
- default:
- break;
- }
- } else { /* forced mode */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
- " req_autoneg 0x%x\n",
- bp->req_flow_ctrl, bp->req_autoneg);
- break;
-
- case FLOW_CTRL_TX:
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->flow_ctrl = bp->req_flow_ctrl;
- break;
-
- case FLOW_CTRL_NONE:
- default:
- break;
- }
- }
- }
- DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl);
-}
-
-static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
-{
- bp->link_status = 0;
-
- if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
- DP(NETIF_MSG_LINK, "phy link up\n");
-
- bp->phy_link_up = 1;
- bp->link_status |= LINK_STATUS_LINK_UP;
-
- if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
- bp->duplex = DUPLEX_FULL;
- else
- bp->duplex = DUPLEX_HALF;
-
- bnx2x_flow_ctrl_resolve(bp, gp_status);
-
- switch (gp_status & GP_STATUS_SPEED_MASK) {
- case GP_STATUS_10M:
- bp->line_speed = SPEED_10;
- if (bp->duplex == DUPLEX_FULL)
- bp->link_status |= LINK_10TFD;
- else
- bp->link_status |= LINK_10THD;
- break;
-
- case GP_STATUS_100M:
- bp->line_speed = SPEED_100;
- if (bp->duplex == DUPLEX_FULL)
- bp->link_status |= LINK_100TXFD;
- else
- bp->link_status |= LINK_100TXHD;
- break;
-
- case GP_STATUS_1G:
- case GP_STATUS_1G_KX:
- bp->line_speed = SPEED_1000;
- if (bp->duplex == DUPLEX_FULL)
- bp->link_status |= LINK_1000TFD;
- else
- bp->link_status |= LINK_1000THD;
- break;
-
- case GP_STATUS_2_5G:
- bp->line_speed = SPEED_2500;
- if (bp->duplex == DUPLEX_FULL)
- bp->link_status |= LINK_2500TFD;
- else
- bp->link_status |= LINK_2500THD;
- break;
-
- case GP_STATUS_5G:
- case GP_STATUS_6G:
- BNX2X_ERR("link speed unsupported gp_status 0x%x\n",
- gp_status);
- break;
-
- case GP_STATUS_10G_KX4:
- case GP_STATUS_10G_HIG:
- case GP_STATUS_10G_CX4:
- bp->line_speed = SPEED_10000;
- bp->link_status |= LINK_10GTFD;
- break;
-
- case GP_STATUS_12G_HIG:
- bp->line_speed = SPEED_12000;
- bp->link_status |= LINK_12GTFD;
- break;
-
- case GP_STATUS_12_5G:
- bp->line_speed = SPEED_12500;
- bp->link_status |= LINK_12_5GTFD;
- break;
-
- case GP_STATUS_13G:
- bp->line_speed = SPEED_13000;
- bp->link_status |= LINK_13GTFD;
- break;
-
- case GP_STATUS_15G:
- bp->line_speed = SPEED_15000;
- bp->link_status |= LINK_15GTFD;
- break;
-
- case GP_STATUS_16G:
- bp->line_speed = SPEED_16000;
- bp->link_status |= LINK_16GTFD;
- break;
-
- default:
- BNX2X_ERR("link speed unsupported gp_status 0x%x\n",
- gp_status);
- break;
- }
-
- bp->link_status |= LINK_STATUS_SERDES_LINK;
-
- if (bp->req_autoneg & AUTONEG_SPEED) {
- bp->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
-
- if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE)
- bp->link_status |=
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
-
- if (bp->autoneg & AUTONEG_PARALLEL)
- bp->link_status |=
- LINK_STATUS_PARALLEL_DETECTION_USED;
- }
-
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- bp->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
-
- if (bp->flow_ctrl & FLOW_CTRL_RX)
- bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
-
- } else { /* link_down */
- DP(NETIF_MSG_LINK, "phy link down\n");
-
- bp->phy_link_up = 0;
-
- bp->line_speed = 0;
- bp->duplex = DUPLEX_FULL;
- bp->flow_ctrl = 0;
- }
-
- DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n"
- DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x"
- " link_status 0x%x\n",
- gp_status, bp->phy_link_up, bp->line_speed, bp->duplex,
- bp->flow_ctrl, bp->link_status);
-}
-
-static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
-{
- int port = bp->port;
-
- /* first reset all status
- * we assume only one line will be change at a time */
- bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_STATUS_XGXS0_LINK10G |
- NIG_STATUS_XGXS0_LINK_STATUS |
- NIG_STATUS_SERDES0_LINK_STATUS));
- if (bp->phy_link_up) {
- if (is_10g) {
- /* Disable the 10G link interrupt
- * by writing 1 to the status register
- */
- DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
- bnx2x_bits_en(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_STATUS_XGXS0_LINK10G);
-
- } else if (bp->phy_flags & PHY_XGXS_FLAG) {
- /* Disable the link interrupt
- * by writing 1 to the relevant lane
- * in the status register
- */
- DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
- bnx2x_bits_en(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- ((1 << bp->ser_lane) <<
- NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
-
- } else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes phy link up\n");
- /* Disable the link interrupt
- * by writing 1 to the status register
- */
- bnx2x_bits_en(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_STATUS_SERDES0_LINK_STATUS);
- }
-
- } else { /* link_down */
- }
-}
-
-static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp)
+static void bnx2x_calc_fc_adv(struct bnx2x *bp)
{
- u32 ext_phy_type;
- u32 ext_phy_addr;
- u32 val1 = 0, val2;
- u32 rx_sd, pcs_status;
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "XGXS Direct\n");
- val1 = 1;
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- DP(NETIF_MSG_LINK, "XGXS 8705\n");
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
-
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
-
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
- val1 = (rx_sd & 0x1);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8706\n");
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
-
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
-
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PCS_DEVAD,
- EXT_PHY_OPT_PCS_STATUS, &pcs_status);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_LINK_STATUS, &val2);
-
- DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x"
- " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n",
- rx_sd, pcs_status, val2, (val2 & (1<<1)));
- /* link is up if both bit 0 of pmd_rx_sd and
- * bit 0 of pcs_status are set, or if the autoneg bit
- 1 is set
- */
- val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1)));
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
- bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
-
- /* clear the interrupt LASI status register */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PCS_DEVAD,
- EXT_PHY_KR_LASI_STATUS, &val2);
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PCS_DEVAD,
- EXT_PHY_KR_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n",
- val2, val1);
- /* Check the LASI */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0x9003, &val2);
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0x9003, &val1);
- DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
- val2, val1);
- /* Check the link status */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PCS_DEVAD,
- EXT_PHY_KR_PCS_STATUS, &val2);
- DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
- /* Check the link status on 1.1.2 */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_KR_STATUS, &val2);
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_KR_STATUS, &val1);
- DP(NETIF_MSG_LINK,
- "KR PMA status 0x%x->0x%x\n", val2, val1);
- val1 = ((val1 & 4) == 4);
- /* If 1G was requested assume the link is up */
- if (!(bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->req_line_speed == SPEED_1000))
- val1 = 1;
- bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val2);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK,
- "10G-base-T LASI status 0x%x->0x%x\n", val2, val1);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_KR_STATUS, &val2);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_KR_STATUS, &val1);
- DP(NETIF_MSG_LINK,
- "10G-base-T PMA status 0x%x->0x%x\n", val2, val1);
- val1 = ((val1 & 4) == 4);
- /* if link is up
- * print the AN outcome of the SFX7101 PHY
- */
- if (val1) {
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0x21, &val2);
- DP(NETIF_MSG_LINK,
- "SFX7101 AN status 0x%x->%s\n", val2,
- (val2 & (1<<14)) ? "Master" : "Slave");
- }
- break;
-
- default:
- DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- val1 = 0;
- break;
- }
-
- } else { /* SerDes */
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "SerDes Direct\n");
- val1 = 1;
- break;
-
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
- DP(NETIF_MSG_LINK, "SerDes 5482\n");
- val1 = 1;
- break;
-
- default:
- DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- val1 = 0;
- break;
- }
- }
-
- return val1;
-}
-
-static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
-{
- int port = bp->port;
- u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
- u32 wb_write[2];
- u32 val;
-
- DP(NETIF_MSG_LINK, "enabling BigMAC\n");
- /* reset and unreset the BigMac */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
- msleep(5);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* enable access for bmac registers */
- NIG_WR(NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
-
- /* XGXS control */
- wb_write[0] = 0x3c;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_XGXS_CONTROL,
- wb_write, 2);
-
- /* tx MAC SA */
- wb_write[0] = ((bp->dev->dev_addr[2] << 24) |
- (bp->dev->dev_addr[3] << 16) |
- (bp->dev->dev_addr[4] << 8) |
- bp->dev->dev_addr[5]);
- wb_write[1] = ((bp->dev->dev_addr[0] << 8) |
- bp->dev->dev_addr[1]);
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR,
- wb_write, 2);
-
- /* tx control */
- val = 0xc0;
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- val |= 0x800000;
- wb_write[0] = val;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, wb_write, 2);
-
- /* set tx mtu */
- wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; /* -CRC */
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, wb_write, 2);
-
- /* mac control */
- val = 0x3;
- if (is_lb) {
- val |= 0x4;
- DP(NETIF_MSG_LINK, "enable bmac loopback\n");
- }
- wb_write[0] = val;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
- wb_write, 2);
-
- /* rx control set to don't strip crc */
- val = 0x14;
- if (bp->flow_ctrl & FLOW_CTRL_RX)
- val |= 0x20;
- wb_write[0] = val;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, wb_write, 2);
-
- /* set rx mtu */
- wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, wb_write, 2);
-
- /* set cnt max size */
- wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; /* -VLAN */
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE,
- wb_write, 2);
-
- /* configure safc */
- wb_write[0] = 0x1000200;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
- wb_write, 2);
-
- /* fix for emulation */
- if (CHIP_REV(bp) == CHIP_REV_EMUL) {
- wb_write[0] = 0xf000;
- wb_write[1] = 0;
- REG_WR_DMAE(bp,
- bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
- wb_write, 2);
- }
-
- /* reset old bmac stats */
- memset(&bp->old_bmac, 0, sizeof(struct bmac_stats));
-
- NIG_WR(NIG_REG_XCM0_OUT_EN + port*4, 0x0);
-
- /* select XGXS */
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1);
- NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
-
- /* disable the NIG in/out to the emac */
- NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0x0);
- NIG_WR(NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
-
- /* enable the NIG in/out to the bmac */
- NIG_WR(NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
-
- NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0x1);
- val = 0;
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- val = 1;
- NIG_WR(NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0x1);
-
- bp->phy_flags |= PHY_BMAC_FLAG;
-
- bp->stats_state = STATS_STATE_ENABLE;
-}
-
-static void bnx2x_bmac_rx_disable(struct bnx2x *bp)
-{
- int port = bp->port;
- u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
- u32 wb_write[2];
-
- /* Only if the bmac is out of reset */
- if (REG_RD(bp, MISC_REG_RESET_REG_2) &
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) {
- /* Clear Rx Enable bit in BMAC_CONTROL register */
-#ifdef BNX2X_DMAE_RD
- bnx2x_read_dmae(bp, bmac_addr +
- BIGMAC_REGISTER_BMAC_CONTROL, 2);
- wb_write[0] = *bnx2x_sp(bp, wb_data[0]);
- wb_write[1] = *bnx2x_sp(bp, wb_data[1]);
-#else
- wb_write[0] = REG_RD(bp,
- bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL);
- wb_write[1] = REG_RD(bp,
- bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4);
-#endif
- wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
- wb_write, 2);
- msleep(1);
- }
-}
-
-static void bnx2x_emac_enable(struct bnx2x *bp)
-{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val;
- int timeout;
-
- DP(NETIF_MSG_LINK, "enabling EMAC\n");
- /* reset and unreset the emac core */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
- msleep(5);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
- (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
-
- /* enable emac and not bmac */
- NIG_WR(NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
-
- /* for paladium */
- if (CHIP_REV(bp) == CHIP_REV_EMUL) {
- /* Use lane 1 (of lanes 0-3) */
- NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
- }
- /* for fpga */
- else if (CHIP_REV(bp) == CHIP_REV_FPGA) {
- /* Use lane 1 (of lanes 0-3) */
- NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0);
- }
- /* ASIC */
- else {
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- DP(NETIF_MSG_LINK, "XGXS\n");
- /* select the master lanes (out of 0-3) */
- NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4,
- bp->ser_lane);
- /* select XGXS */
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
-
- } else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes\n");
- /* select SerDes */
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0);
- }
- }
-
- /* enable emac */
- NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 1);
-
- /* init emac - use read-modify-write */
- /* self clear reset */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
- EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
-
- timeout = 200;
- while (val & EMAC_MODE_RESET) {
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
- DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
- if (!timeout) {
- BNX2X_ERR("EMAC timeout!\n");
- break;
- }
- timeout--;
- }
-
- /* reset tx part */
- EMAC_WR(EMAC_REG_EMAC_TX_MODE, EMAC_TX_MODE_RESET);
-
- timeout = 200;
- while (val & EMAC_TX_MODE_RESET) {
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_TX_MODE);
- DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
- if (!timeout) {
- BNX2X_ERR("EMAC timeout!\n");
- break;
- }
- timeout--;
- }
-
- if (CHIP_REV_IS_SLOW(bp)) {
- /* config GMII mode */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
- EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_PORT_GMII));
-
- } else { /* ASIC */
- /* pause enable/disable */
- bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
- EMAC_RX_MODE_FLOW_EN);
- if (bp->flow_ctrl & FLOW_CTRL_RX)
- bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
- EMAC_RX_MODE_FLOW_EN);
-
- bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
- EMAC_TX_MODE_EXT_PAUSE_EN);
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
- EMAC_TX_MODE_EXT_PAUSE_EN);
- }
-
- /* KEEP_VLAN_TAG, promiscuous */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
- val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
- EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
-
- /* identify magic packets */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
- EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_MPKT));
-
- /* enable emac for jumbo packets */
- EMAC_WR(EMAC_REG_EMAC_RX_MTU_SIZE,
- (EMAC_RX_MTU_SIZE_JUMBO_ENA |
- (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD))); /* -VLAN */
-
- /* strip CRC */
- NIG_WR(NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1);
-
- val = ((bp->dev->dev_addr[0] << 8) |
- bp->dev->dev_addr[1]);
- EMAC_WR(EMAC_REG_EMAC_MAC_MATCH, val);
-
- val = ((bp->dev->dev_addr[2] << 24) |
- (bp->dev->dev_addr[3] << 16) |
- (bp->dev->dev_addr[4] << 8) |
- bp->dev->dev_addr[5]);
- EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
-
- /* disable the NIG in/out to the bmac */
- NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0x0);
- NIG_WR(NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0);
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0x0);
-
- /* enable the NIG in/out to the emac */
- NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0x1);
- val = 0;
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- val = 1;
- NIG_WR(NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1);
-
- if (CHIP_REV(bp) == CHIP_REV_FPGA) {
- /* take the BigMac out of reset */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* enable access for bmac registers */
- NIG_WR(NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
- }
-
- bp->phy_flags |= PHY_EMAC_FLAG;
-
- bp->stats_state = STATS_STATE_ENABLE;
-}
-
-static void bnx2x_emac_program(struct bnx2x *bp)
-{
- u16 mode = 0;
- int port = bp->port;
-
- DP(NETIF_MSG_LINK, "setting link speed & duplex\n");
- bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
- (EMAC_MODE_25G_MODE |
- EMAC_MODE_PORT_MII_10M |
- EMAC_MODE_HALF_DUPLEX));
- switch (bp->line_speed) {
- case SPEED_10:
- mode |= EMAC_MODE_PORT_MII_10M;
+ switch (bp->link_vars.ieee_fc) {
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
+ bp->advertising &= ~(ADVERTISED_Asym_Pause |
+ ADVERTISED_Pause);
break;
-
- case SPEED_100:
- mode |= EMAC_MODE_PORT_MII;
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
+ bp->advertising |= (ADVERTISED_Asym_Pause |
+ ADVERTISED_Pause);
break;
-
- case SPEED_1000:
- mode |= EMAC_MODE_PORT_GMII;
- break;
-
- case SPEED_2500:
- mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII);
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
+ bp->advertising |= ADVERTISED_Asym_Pause;
break;
-
default:
- /* 10G not valid for EMAC */
- BNX2X_ERR("Invalid line_speed 0x%x\n", bp->line_speed);
+ bp->advertising &= ~(ADVERTISED_Asym_Pause |
+ ADVERTISED_Pause);
break;
}
-
- if (bp->duplex == DUPLEX_HALF)
- mode |= EMAC_MODE_HALF_DUPLEX;
- bnx2x_bits_en(bp, GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
- mode);
-
- bnx2x_leds_set(bp, bp->line_speed);
-}
-
-static void bnx2x_set_sgmii_tx_driver(struct bnx2x *bp)
-{
- u32 lp_up2;
- u32 tx_driver;
-
- /* read precomp */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
- bnx2x_mdio22_read(bp, MDIO_OVER_1G_LP_UP2, &lp_up2);
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_TX0);
- bnx2x_mdio22_read(bp, MDIO_TX0_TX_DRIVER, &tx_driver);
-
- /* bits [10:7] at lp_up2, positioned at [15:12] */
- lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >>
- MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) <<
- MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT);
-
- if ((lp_up2 != 0) &&
- (lp_up2 != (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK))) {
- /* replace tx_driver bits [15:12] */
- tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK;
- tx_driver |= lp_up2;
- bnx2x_mdio22_write(bp, MDIO_TX0_TX_DRIVER, tx_driver);
- }
-}
-
-static void bnx2x_pbf_update(struct bnx2x *bp)
-{
- int port = bp->port;
- u32 init_crd, crd;
- u32 count = 1000;
- u32 pause = 0;
-
- /* disable port */
- REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
-
- /* wait for init credit */
- init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4);
- crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
- DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd);
-
- while ((init_crd != crd) && count) {
- msleep(5);
-
- crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
- count--;
- }
- crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
- if (init_crd != crd)
- BNX2X_ERR("BUG! init_crd 0x%x != crd 0x%x\n", init_crd, crd);
-
- if (bp->flow_ctrl & FLOW_CTRL_RX)
- pause = 1;
- REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, pause);
- if (pause) {
- /* update threshold */
- REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
- /* update init credit */
- init_crd = 778; /* (800-18-4) */
-
- } else {
- u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)/16;
-
- /* update threshold */
- REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
- /* update init credit */
- switch (bp->line_speed) {
- case SPEED_10:
- case SPEED_100:
- case SPEED_1000:
- init_crd = thresh + 55 - 22;
- break;
-
- case SPEED_2500:
- init_crd = thresh + 138 - 22;
- break;
-
- case SPEED_10000:
- init_crd = thresh + 553 - 22;
- break;
-
- default:
- BNX2X_ERR("Invalid line_speed 0x%x\n",
- bp->line_speed);
- break;
- }
- }
- REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd);
- DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n",
- bp->line_speed, init_crd);
-
- /* probe the credit changes */
- REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1);
- msleep(5);
- REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0);
-
- /* enable port */
- REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0);
-}
-
-static void bnx2x_update_mng(struct bnx2x *bp)
-{
- if (!nomcp)
- SHMEM_WR(bp, port_mb[bp->port].link_status,
- bp->link_status);
}
static void bnx2x_link_report(struct bnx2x *bp)
{
- if (bp->link_up) {
- netif_carrier_on(bp->dev);
+ if (bp->link_vars.link_up) {
+ if (bp->state == BNX2X_STATE_OPEN)
+ netif_carrier_on(bp->dev);
printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
- printk("%d Mbps ", bp->line_speed);
+ printk("%d Mbps ", bp->link_vars.line_speed);
- if (bp->duplex == DUPLEX_FULL)
+ if (bp->link_vars.duplex == DUPLEX_FULL)
printk("full duplex");
else
printk("half duplex");
- if (bp->flow_ctrl) {
- if (bp->flow_ctrl & FLOW_CTRL_RX) {
+ if (bp->link_vars.flow_ctrl != FLOW_CTRL_NONE) {
+ if (bp->link_vars.flow_ctrl & FLOW_CTRL_RX) {
printk(", receive ");
- if (bp->flow_ctrl & FLOW_CTRL_TX)
+ if (bp->link_vars.flow_ctrl & FLOW_CTRL_TX)
printk("& transmit ");
} else {
printk(", transmit ");
@@ -2638,1318 +1376,78 @@ static void bnx2x_link_report(struct bnx2x *bp)
} else { /* link_down */
netif_carrier_off(bp->dev);
- printk(KERN_INFO PFX "%s NIC Link is Down\n", bp->dev->name);
- }
-}
-
-static void bnx2x_link_up(struct bnx2x *bp)
-{
- int port = bp->port;
-
- /* PBF - link up */
- bnx2x_pbf_update(bp);
-
- /* disable drain */
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
-
- /* update shared memory */
- bnx2x_update_mng(bp);
-
- /* indicate link up */
- bnx2x_link_report(bp);
-}
-
-static void bnx2x_link_down(struct bnx2x *bp)
-{
- int port = bp->port;
-
- /* notify stats */
- if (bp->stats_state != STATS_STATE_DISABLE) {
- bp->stats_state = STATS_STATE_STOP;
- DP(BNX2X_MSG_STATS, "stats_state - STOP\n");
- }
-
- /* indicate no mac active */
- bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG);
-
- /* update shared memory */
- bnx2x_update_mng(bp);
-
- /* activate nig drain */
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
-
- /* reset BigMac */
- bnx2x_bmac_rx_disable(bp);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* indicate link down */
- bnx2x_link_report(bp);
-}
-
-static void bnx2x_init_mac_stats(struct bnx2x *bp);
-
-/* This function is called upon link interrupt */
-static void bnx2x_link_update(struct bnx2x *bp)
-{
- int port = bp->port;
- int i;
- u32 gp_status;
- int link_10g;
-
- DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
- " int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
- " 10G %x, XGXS_LINK %x\n", port,
- (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
- REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
- REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask,
- REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
- REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
- REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
- REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
- );
-
- might_sleep();
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS);
- /* avoid fast toggling */
- for (i = 0; i < 10; i++) {
- msleep(10);
- bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1,
- &gp_status);
+ printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
}
-
- bnx2x_link_settings_status(bp, gp_status);
-
- /* anything 10 and over uses the bmac */
- link_10g = ((bp->line_speed >= SPEED_10000) &&
- (bp->line_speed <= SPEED_16000));
-
- bnx2x_link_int_ack(bp, link_10g);
-
- /* link is up only if both local phy and external phy are up */
- bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp));
- if (bp->link_up) {
- if (link_10g) {
- bnx2x_bmac_enable(bp, 0);
- bnx2x_leds_set(bp, SPEED_10000);
-
- } else {
- bnx2x_emac_enable(bp);
- bnx2x_emac_program(bp);
-
- /* AN complete? */
- if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
- if (!(bp->phy_flags & PHY_SGMII_FLAG))
- bnx2x_set_sgmii_tx_driver(bp);
- }
- }
- bnx2x_link_up(bp);
-
- } else { /* link down */
- bnx2x_leds_unset(bp);
- bnx2x_link_down(bp);
- }
-
- bnx2x_init_mac_stats(bp);
}
-/*
- * Init service functions
- */
-
-static void bnx2x_set_aer_mmd(struct bnx2x *bp)
+static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
{
- u16 offset = (bp->phy_flags & PHY_XGXS_FLAG) ?
- (bp->phy_addr + bp->ser_lane) : 0;
+ u8 rc;
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_AER_BLOCK);
- bnx2x_mdio22_write(bp, MDIO_AER_BLOCK_AER_REG, 0x3800 + offset);
-}
+ /* Initialize link parameters structure variables */
+ bp->link_params.mtu = bp->dev->mtu;
-static void bnx2x_set_master_ln(struct bnx2x *bp)
-{
- u32 new_master_ln;
-
- /* set the master_ln for AN */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
- bnx2x_mdio22_read(bp, MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
- &new_master_ln);
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
- (new_master_ln | bp->ser_lane));
-}
-
-static void bnx2x_reset_unicore(struct bnx2x *bp)
-{
- u32 mii_control;
- int i;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
- /* reset the unicore */
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- (mii_control | MDIO_COMBO_IEEO_MII_CONTROL_RESET));
-
- /* wait for the reset to self clear */
- for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) {
- udelay(5);
-
- /* the reset erased the previous bank value */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
-
- if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) {
- udelay(5);
- return;
- }
- }
-
- BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n",
- (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
- bp->phy_addr);
-}
-
-static void bnx2x_set_swap_lanes(struct bnx2x *bp)
-{
- /* Each two bits represents a lane number:
- No swap is 0123 => 0x1b no need to enable the swap */
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
- if (bp->rx_lane_swap != 0x1b) {
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_RX_LN_SWAP,
- (bp->rx_lane_swap |
- MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE |
- MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE));
- } else {
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0);
- }
-
- if (bp->tx_lane_swap != 0x1b) {
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TX_LN_SWAP,
- (bp->tx_lane_swap |
- MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE));
- } else {
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0);
- }
-}
-
-static void bnx2x_set_parallel_detection(struct bnx2x *bp)
-{
- u32 control2;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL);
- bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
- &control2);
-
- if (bp->autoneg & AUTONEG_PARALLEL) {
- control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
- } else {
- control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
- }
- bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
- control2);
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- DP(NETIF_MSG_LINK, "XGXS\n");
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT);
-
- bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
-
- bnx2x_mdio22_read(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- &control2);
-
- if (bp->autoneg & AUTONEG_PARALLEL) {
- control2 |=
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
- } else {
- control2 &=
- ~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
- }
- bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- control2);
-
- /* Disable parallel detection of HiG */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
- MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
- MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
- }
-}
-
-static void bnx2x_set_autoneg(struct bnx2x *bp)
-{
- u32 reg_val;
-
- /* CL37 Autoneg */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
- if ((bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->autoneg & AUTONEG_CL37)) {
- /* CL37 Autoneg Enabled */
- reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
- } else {
- /* CL37 Autoneg Disabled */
- reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
- MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN);
- }
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
-
- /* Enable/Disable Autodetection */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL);
- bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
- reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
-
- if ((bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->autoneg & AUTONEG_SGMII_FIBER_AUTODET)) {
- reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
- } else {
- reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
- }
- bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val);
-
- /* Enable TetonII and BAM autoneg */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_BAM_NEXT_PAGE);
- bnx2x_mdio22_read(bp, MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
- &reg_val);
- if ((bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->autoneg & AUTONEG_CL37) && (bp->autoneg & AUTONEG_BAM)) {
- /* Enable BAM aneg Mode and TetonII aneg Mode */
- reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
- MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
- } else {
- /* TetonII and BAM Autoneg Disabled */
- reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
- MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
- }
- bnx2x_mdio22_write(bp, MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
- reg_val);
-
- /* Enable Clause 73 Aneg */
- if ((bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->autoneg & AUTONEG_CL73)) {
- /* Enable BAM Station Manager */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_USERB0);
- bnx2x_mdio22_write(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL1,
- (MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
- MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
- MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN));
-
- /* Merge CL73 and CL37 aneg resolution */
- bnx2x_mdio22_read(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL3,
- &reg_val);
- bnx2x_mdio22_write(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL3,
- (reg_val |
- MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR));
-
- /* Set the CL73 AN speed */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB1);
- bnx2x_mdio22_read(bp, MDIO_CL73_IEEEB1_AN_ADV2, &reg_val);
- /* In the SerDes we support only the 1G.
- In the XGXS we support the 10G KX4
- but we currently do not support the KR */
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- DP(NETIF_MSG_LINK, "XGXS\n");
- /* 10G KX4 */
- reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
- } else {
- DP(NETIF_MSG_LINK, "SerDes\n");
- /* 1000M KX */
- reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
- }
- bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB1_AN_ADV2, reg_val);
-
- /* CL73 Autoneg Enabled */
- reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
- } else {
- /* CL73 Autoneg Disabled */
- reg_val = 0;
- }
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0);
- bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val);
-}
-
-/* program SerDes, forced speed */
-static void bnx2x_program_serdes(struct bnx2x *bp)
-{
- u32 reg_val;
-
- /* program duplex, disable autoneg */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
- reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX |
- MDIO_COMBO_IEEO_MII_CONTROL_AN_EN);
- if (bp->req_duplex == DUPLEX_FULL)
- reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
-
- /* program speed
- - needed only if the speed is greater than 1G (2.5G or 10G) */
- if (bp->req_line_speed > SPEED_1000) {
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL);
- bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_MISC1, &reg_val);
- /* clearing the speed value before setting the right speed */
- reg_val &= ~MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK;
- reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
- MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
- if (bp->req_line_speed == SPEED_10000)
- reg_val |=
- MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
- bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_MISC1, reg_val);
- }
-}
-
-static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp)
-{
- u32 val = 0;
-
- /* configure the 48 bits for BAM AN */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
-
- /* set extended capabilities */
- if (bp->advertising & ADVERTISED_2500baseX_Full)
- val |= MDIO_OVER_1G_UP1_2_5G;
- if (bp->advertising & ADVERTISED_10000baseT_Full)
- val |= MDIO_OVER_1G_UP1_10G;
- bnx2x_mdio22_write(bp, MDIO_OVER_1G_UP1, val);
-
- bnx2x_mdio22_write(bp, MDIO_OVER_1G_UP3, 0);
-}
-
-static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp)
-{
- u32 an_adv;
-
- /* for AN, we are always publishing full duplex */
- an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
-
- /* resolve pause mode and advertisement
- * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
- if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- if (bp->dev->mtu <= 4500) {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- }
- break;
-
- case FLOW_CTRL_TX:
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
-
- case FLOW_CTRL_RX:
- if (bp->dev->mtu <= 4500) {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- }
- break;
-
- case FLOW_CTRL_BOTH:
- if (bp->dev->mtu <= 4500) {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- }
- break;
-
- case FLOW_CTRL_NONE:
- default:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- } else { /* forced mode */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
- " req_autoneg 0x%x\n",
- bp->req_flow_ctrl, bp->req_autoneg);
- break;
-
- case FLOW_CTRL_TX:
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
-
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
-
- case FLOW_CTRL_NONE:
- default:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- }
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_AUTO_NEG_ADV, an_adv);
-}
-
-static void bnx2x_restart_autoneg(struct bnx2x *bp)
-{
- if (bp->autoneg & AUTONEG_CL73) {
- /* enable and restart clause 73 aneg */
- u32 an_ctrl;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0);
- bnx2x_mdio22_read(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
- &an_ctrl);
- bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
- (an_ctrl |
- MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
- MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
-
- } else {
- /* Enable and restart BAM/CL37 aneg */
- u32 mii_control;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- (mii_control |
- MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
- MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
- }
-}
-
-static void bnx2x_initialize_sgmii_process(struct bnx2x *bp)
-{
- u32 control1;
-
- /* in SGMII mode, the unicore is always slave */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL);
- bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
- &control1);
- control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT;
- /* set sgmii mode (and not fiber) */
- control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE |
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET |
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE);
- bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
- control1);
-
- /* if forced speed */
- if (!(bp->req_autoneg & AUTONEG_SPEED)) {
- /* set speed, disable autoneg */
- u32 mii_control;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
- mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
- MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK |
- MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
-
- switch (bp->req_line_speed) {
- case SPEED_100:
- mii_control |=
- MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
- break;
- case SPEED_1000:
- mii_control |=
- MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000;
- break;
- case SPEED_10:
- /* there is nothing to set for 10M */
- break;
- default:
- /* invalid speed for SGMII */
- DP(NETIF_MSG_LINK, "Invalid req_line_speed 0x%x\n",
- bp->req_line_speed);
- break;
- }
-
- /* setting the full duplex */
- if (bp->req_duplex == DUPLEX_FULL)
- mii_control |=
- MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- mii_control);
-
- } else { /* AN mode */
- /* enable and restart AN */
- bnx2x_restart_autoneg(bp);
- }
-}
-
-static void bnx2x_link_int_enable(struct bnx2x *bp)
-{
- int port = bp->port;
- u32 ext_phy_type;
- u32 mask;
-
- /* setting the status to report on link up
- for either XGXS or SerDes */
- bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_STATUS_XGXS0_LINK10G |
- NIG_STATUS_XGXS0_LINK_STATUS |
- NIG_STATUS_SERDES0_LINK_STATUS));
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- mask = (NIG_MASK_XGXS0_LINK10G |
- NIG_MASK_XGXS0_LINK_STATUS);
- DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
- (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
- (ext_phy_type !=
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
- mask |= NIG_MASK_MI_INT;
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
- }
-
- } else { /* SerDes */
- mask = NIG_MASK_SERDES0_LINK_STATUS;
- DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
- if ((ext_phy_type !=
- PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
- (ext_phy_type !=
- PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
- mask |= NIG_MASK_MI_INT;
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
- }
- }
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- mask);
- DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
- " int_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
- " 10G %x, XGXS_LINK %x\n", port,
- (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
- REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
- REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
- REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
- REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
- REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
- REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
- );
-}
-
-static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp)
-{
- u32 ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- u32 fw_ver1, fw_ver2;
-
- /* Need to wait 200ms after reset */
- msleep(200);
- /* Boot port from external ROM
- * Set ser_boot_ctl bit in the MISC_CTRL1 register
- */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- EXT_PHY_KR_MISC_CTRL1, 0x0001);
-
- /* Reset internal microprocessor */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
- EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
- /* set micro reset = 0 */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
- EXT_PHY_KR_ROM_MICRO_RESET);
- /* Reset internal microprocessor */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
- EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
- /* wait for 100ms for code download via SPI port */
- msleep(100);
-
- /* Clear ser_boot_ctl bit */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- EXT_PHY_KR_MISC_CTRL1, 0x0000);
- /* Wait 100ms */
- msleep(100);
-
- /* Print the PHY FW version */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0xca19, &fw_ver1);
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0xca1a, &fw_ver2);
- DP(NETIF_MSG_LINK,
- "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
-}
-
-static void bnx2x_bcm8072_force_10G(struct bnx2x *bp)
-{
- u32 ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- /* Force KR or KX */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL,
- 0x2040);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2,
- 0x000b);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL,
- 0x0000);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL,
- 0x0000);
-}
-
-static void bnx2x_ext_phy_init(struct bnx2x *bp)
-{
- u32 ext_phy_type;
- u32 ext_phy_addr;
- u32 cnt;
- u32 ctrl;
- u32 val = 0;
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- /* Make sure that the soft reset is off (expect for the 8072:
- * due to the lock, it will be done inside the specific
- * handling)
- */
- if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
- (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
- (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
- (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) {
- /* Wait for soft reset to get cleared upto 1 sec */
- for (cnt = 0; cnt < 1000; cnt++) {
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL, &ctrl);
- if (!(ctrl & (1<<15)))
- break;
- msleep(1);
- }
- DP(NETIF_MSG_LINK,
- "control reg 0x%x (after %d ms)\n", ctrl, cnt);
- }
-
- switch (ext_phy_type) {
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "XGXS Direct\n");
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- DP(NETIF_MSG_LINK, "XGXS 8705\n");
-
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_MISC_CNTL,
- 0x8288);
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PHY_IDENTIFIER,
- 0x7fbf);
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CMU_PLL_BYPASS,
- 0x0100);
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_CNTL, 0x1);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8706\n");
-
- if (!(bp->req_autoneg & AUTONEG_SPEED)) {
- /* Force speed */
- if (bp->req_line_speed == SPEED_10000) {
- DP(NETIF_MSG_LINK,
- "XGXS 8706 force 10Gbps\n");
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_DIGITAL_CNT,
- 0x400);
- } else {
- /* Force 1Gbps */
- DP(NETIF_MSG_LINK,
- "XGXS 8706 force 1Gbps\n");
-
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL,
- 0x0040);
-
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL2,
- 0x000D);
- }
+ bnx2x_phy_hw_lock(bp);
+ rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
- /* Enable LASI */
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_CNTL,
- 0x1);
- } else {
- /* AUTONEG */
- /* Allow CL37 through CL73 */
- DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_CL37_CL73,
- 0x040c);
-
- /* Enable Full-Duplex advertisment on CL37 */
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_CL37_FD,
- 0x0020);
- /* Enable CL37 AN */
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_CL37_AN,
- 0x1000);
- /* Advertise 10G/1G support */
- if (bp->advertising &
- ADVERTISED_1000baseT_Full)
- val = (1<<5);
- if (bp->advertising &
- ADVERTISED_10000baseT_Full)
- val |= (1<<7);
-
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_ADV, val);
- /* Enable LASI */
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_CNTL,
- 0x1);
-
- /* Enable clause 73 AN */
- bnx2x_mdio45_write(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_CNTL,
- 0x1200);
- }
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
- bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- /* Wait for soft reset to get cleared upto 1 sec */
- for (cnt = 0; cnt < 1000; cnt++) {
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL, &ctrl);
- if (!(ctrl & (1<<15)))
- break;
- msleep(1);
- }
- DP(NETIF_MSG_LINK,
- "8072 control reg 0x%x (after %d ms)\n",
- ctrl, cnt);
-
- bnx2x_bcm8072_external_rom_boot(bp);
- DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n");
-
- /* enable LASI */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0x9000, 0x0400);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- EXT_PHY_KR_LASI_CNTL, 0x0004);
-
- /* If this is forced speed, set to KR or KX
- * (all other are not supported)
- */
- if (!(bp->req_autoneg & AUTONEG_SPEED)) {
- if (bp->req_line_speed == SPEED_10000) {
- bnx2x_bcm8072_force_10G(bp);
- DP(NETIF_MSG_LINK,
- "Forced speed 10G on 8072\n");
- /* unlock */
- bnx2x_hw_unlock(bp,
- HW_LOCK_RESOURCE_8072_MDIO);
- break;
- } else
- val = (1<<5);
- } else {
-
- /* Advertise 10G/1G support */
- if (bp->advertising &
- ADVERTISED_1000baseT_Full)
- val = (1<<5);
- if (bp->advertising &
- ADVERTISED_10000baseT_Full)
- val |= (1<<7);
- }
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0x11, val);
- /* Add support for CL37 ( passive mode ) I */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0x8370, 0x040c);
- /* Add support for CL37 ( passive mode ) II */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0xffe4, 0x20);
- /* Add support for CL37 ( passive mode ) III */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0xffe0, 0x1000);
- /* Restart autoneg */
- msleep(500);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_CTRL, 0x1200);
- DP(NETIF_MSG_LINK, "8072 Autoneg Restart: "
- "1G %ssupported 10G %ssupported\n",
- (val & (1<<5)) ? "" : "not ",
- (val & (1<<7)) ? "" : "not ");
-
- /* unlock */
- bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- DP(NETIF_MSG_LINK,
- "Setting the SFX7101 LASI indication\n");
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_CNTL, 0x1);
- DP(NETIF_MSG_LINK,
- "Setting the SFX7101 LED to blink on traffic\n");
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- 0xC007, (1<<3));
-
- /* read modify write pause advertizing */
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_AUTO_NEG_ADVERT, &val);
- val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH;
- /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
- if (bp->advertising & ADVERTISED_Pause)
- val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE;
-
- if (bp->advertising & ADVERTISED_Asym_Pause) {
- val |=
- EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC;
- }
- DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val);
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_AUTO_NEG_ADVERT, val);
- /* Restart autoneg */
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_CTRL, &val);
- val |= 0x200;
- bnx2x_mdio45_write(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_CTRL, val);
- break;
-
- default:
- BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- break;
- }
-
- } else { /* SerDes */
-/* ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
-*/
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "SerDes Direct\n");
- break;
-
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
- DP(NETIF_MSG_LINK, "SerDes 5482\n");
- break;
-
- default:
- DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- break;
- }
- }
-}
-
-static void bnx2x_ext_phy_reset(struct bnx2x *bp)
-{
- u32 ext_phy_type;
- u32 ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
-
- /* The PHY reset is controled by GPIO 1
- * Give it 1ms of reset pulse
- */
- if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
- (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW);
- msleep(1);
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH);
- }
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "XGXS Direct\n");
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
- bnx2x_mdio45_write(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL, 0xa040);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
- DP(NETIF_MSG_LINK, "XGXS 8072\n");
- bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0, 1<<15);
- bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
- break;
-
- default:
- DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- break;
- }
-
- } else { /* SerDes */
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "SerDes Direct\n");
- break;
-
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
- DP(NETIF_MSG_LINK, "SerDes 5482\n");
- break;
+ if (bp->link_vars.link_up)
+ bnx2x_link_report(bp);
- default:
- DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- break;
- }
- }
+ bnx2x_calc_fc_adv(bp);
+ return rc;
}
-static void bnx2x_link_initialize(struct bnx2x *bp)
+static void bnx2x_link_set(struct bnx2x *bp)
{
- int port = bp->port;
-
- /* disable attentions */
- bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- (NIG_MASK_XGXS0_LINK_STATUS |
- NIG_MASK_XGXS0_LINK10G |
- NIG_MASK_SERDES0_LINK_STATUS |
- NIG_MASK_MI_INT));
-
- /* Activate the external PHY */
- bnx2x_ext_phy_reset(bp);
-
- bnx2x_set_aer_mmd(bp);
-
- if (bp->phy_flags & PHY_XGXS_FLAG)
- bnx2x_set_master_ln(bp);
-
- /* reset the SerDes and wait for reset bit return low */
- bnx2x_reset_unicore(bp);
-
- bnx2x_set_aer_mmd(bp);
-
- /* setting the masterLn_def again after the reset */
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- bnx2x_set_master_ln(bp);
- bnx2x_set_swap_lanes(bp);
- }
-
- /* Set Parallel Detect */
- if (bp->req_autoneg & AUTONEG_SPEED)
- bnx2x_set_parallel_detection(bp);
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- if (bp->req_line_speed &&
- bp->req_line_speed < SPEED_1000) {
- bp->phy_flags |= PHY_SGMII_FLAG;
- } else {
- bp->phy_flags &= ~PHY_SGMII_FLAG;
- }
- }
-
- if (!(bp->phy_flags & PHY_SGMII_FLAG)) {
- u16 bank, rx_eq;
-
- rx_eq = ((bp->serdes_config &
- PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
- PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
-
- DP(NETIF_MSG_LINK, "setting rx eq to %d\n", rx_eq);
- for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
- bank += (MDIO_REG_BANK_RX1 - MDIO_REG_BANK_RX0)) {
- MDIO_SET_REG_BANK(bp, bank);
- bnx2x_mdio22_write(bp, MDIO_RX0_RX_EQ_BOOST,
- ((rx_eq &
- MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
- MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
- }
-
- /* forced speed requested? */
- if (!(bp->req_autoneg & AUTONEG_SPEED)) {
- DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
-
- /* disable autoneg */
- bnx2x_set_autoneg(bp);
-
- /* program speed and duplex */
- bnx2x_program_serdes(bp);
-
- } else { /* AN_mode */
- DP(NETIF_MSG_LINK, "not SGMII, AN\n");
-
- /* AN enabled */
- bnx2x_set_brcm_cl37_advertisment(bp);
-
- /* program duplex & pause advertisement (for aneg) */
- bnx2x_set_ieee_aneg_advertisment(bp);
-
- /* enable autoneg */
- bnx2x_set_autoneg(bp);
-
- /* enable and restart AN */
- bnx2x_restart_autoneg(bp);
- }
-
- } else { /* SGMII mode */
- DP(NETIF_MSG_LINK, "SGMII\n");
-
- bnx2x_initialize_sgmii_process(bp);
- }
-
- /* init ext phy and enable link state int */
- bnx2x_ext_phy_init(bp);
+ bnx2x_phy_hw_lock(bp);
+ bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
- /* enable the interrupt */
- bnx2x_link_int_enable(bp);
+ bnx2x_calc_fc_adv(bp);
}
-static void bnx2x_phy_deassert(struct bnx2x *bp)
+static void bnx2x__link_reset(struct bnx2x *bp)
{
- int port = bp->port;
- u32 val;
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- DP(NETIF_MSG_LINK, "XGXS\n");
- val = XGXS_RESET_BITS;
-
- } else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes\n");
- val = SERDES_RESET_BITS;
- }
-
- val = val << (port*16);
-
- /* reset and unreset the SerDes/XGXS */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
- msleep(5);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);
+ bnx2x_phy_hw_lock(bp);
+ bnx2x_link_reset(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
}
-static int bnx2x_phy_init(struct bnx2x *bp)
+static u8 bnx2x_link_test(struct bnx2x *bp)
{
- DP(NETIF_MSG_LINK, "started\n");
- if (CHIP_REV(bp) == CHIP_REV_FPGA) {
- bp->phy_flags |= PHY_EMAC_FLAG;
- bp->link_up = 1;
- bp->line_speed = SPEED_10000;
- bp->duplex = DUPLEX_FULL;
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + bp->port*4, 0);
- bnx2x_emac_enable(bp);
- bnx2x_link_report(bp);
- return 0;
+ u8 rc;
- } else if (CHIP_REV(bp) == CHIP_REV_EMUL) {
- bp->phy_flags |= PHY_BMAC_FLAG;
- bp->link_up = 1;
- bp->line_speed = SPEED_10000;
- bp->duplex = DUPLEX_FULL;
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + bp->port*4, 0);
- bnx2x_bmac_enable(bp, 0);
- bnx2x_link_report(bp);
- return 0;
+ bnx2x_phy_hw_lock(bp);
+ rc = bnx2x_test_link(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
- } else {
- bnx2x_phy_deassert(bp);
- bnx2x_link_initialize(bp);
- }
-
- return 0;
+ return rc;
}
-static void bnx2x_link_reset(struct bnx2x *bp)
+/* This function is called upon link interrupt */
+static void bnx2x_link_attn(struct bnx2x *bp)
{
- int port = bp->port;
- u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
-
- /* update shared memory */
- bp->link_status = 0;
- bnx2x_update_mng(bp);
-
- /* disable attentions */
- bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- (NIG_MASK_XGXS0_LINK_STATUS |
- NIG_MASK_XGXS0_LINK10G |
- NIG_MASK_SERDES0_LINK_STATUS |
- NIG_MASK_MI_INT));
-
- /* activate nig drain */
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
-
- /* disable nig egress interface */
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
-
- /* Stop BigMac rx */
- bnx2x_bmac_rx_disable(bp);
-
- /* disable emac */
- NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
-
- msleep(10);
+ bnx2x_phy_hw_lock(bp);
+ bnx2x_link_update(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
- /* The PHY reset is controled by GPIO 1
- * Hold it as output low
- */
- if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
- (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW);
- DP(NETIF_MSG_LINK, "reset external PHY\n");
- }
-
- /* reset the SerDes/XGXS */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
- (0x1ff << (port*16)));
-
- /* reset BigMac */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* disable nig ingress interface */
- NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
- NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0);
-
- /* set link down */
- bp->link_up = 0;
+ /* indicate link status */
+ bnx2x_link_report(bp);
}
-#ifdef BNX2X_XGXS_LB
-static void bnx2x_set_xgxs_loopback(struct bnx2x *bp, int is_10g)
+static void bnx2x__link_status_update(struct bnx2x *bp)
{
- int port = bp->port;
-
- if (is_10g) {
- u32 md_devad;
-
- DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
-
- /* change the uni_phy_addr in the nig */
- REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18),
- &md_devad);
- NIG_WR(NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5);
-
- /* change the aer mmd */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_AER_BLOCK);
- bnx2x_mdio22_write(bp, MDIO_AER_BLOCK_AER_REG, 0x2800);
-
- /* config combo IEEE0 control reg for loopback */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0);
- bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
- 0x6041);
-
- /* set aer mmd back */
- bnx2x_set_aer_mmd(bp);
-
- /* and md_devad */
- NIG_WR(NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, md_devad);
-
- } else {
- u32 mii_control;
+ if (bp->state != BNX2X_STATE_OPEN)
+ return;
- DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n");
+ bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- (mii_control |
- MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK));
- }
+ /* indicate link status */
+ bnx2x_link_report(bp);
}
-#endif
-/* end of PHY/MAC */
+/* end of Link */
/* slow path */
@@ -4113,7 +1611,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
REG_WR(bp, nig_int_mask_addr, 0);
- bnx2x_link_update(bp);
+ bnx2x_link_attn(bp);
/* handle unicore attn? */
}
@@ -4196,14 +1694,14 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_LOW);
/* mark the failure */
- bp->ext_phy_config &=
+ bp->link_params.ext_phy_config &=
~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
- bp->ext_phy_config |=
+ bp->link_params.ext_phy_config |=
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
SHMEM_WR(bp,
dev_info.port_hw_config[port].
external_phy_config,
- bp->ext_phy_config);
+ bp->link_params.ext_phy_config);
/* log the failure */
printk(KERN_ERR PFX "Fan Failure on Network"
" Controller %s has caused the driver to"
@@ -4580,7 +2078,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
#endif
(port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0));
- if (bp->link_up)
+ if (bp->link_vars.link_up)
opcode |= (DMAE_CMD_C_DST_GRC | DMAE_CMD_C_ENABLE);
dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]);
@@ -4593,7 +2091,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
dmae->dst_addr_hi = 0;
dmae->len = (offsetof(struct bnx2x_eth_stats, mac_stx_end) -
sizeof(u32)) >> 2;
- if (bp->link_up) {
+ if (bp->link_vars.link_up) {
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
@@ -4604,7 +2102,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
}
}
- if (!bp->link_up) {
+ if (!bp->link_vars.link_up) {
/* no need to collect statistics in link down */
return;
}
@@ -4619,7 +2117,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
#endif
(port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0));
- if (bp->phy_flags & PHY_BMAC_FLAG) {
+ if (bp->link_vars.mac_type == MAC_TYPE_BMAC) {
mac_addr = (port ? NIG_REG_INGRESS_BMAC1_MEM :
NIG_REG_INGRESS_BMAC0_MEM);
@@ -4656,7 +2154,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
- } else if (bp->phy_flags & PHY_EMAC_FLAG) {
+ } else if (bp->link_vars.mac_type == MAC_TYPE_EMAC) {
mac_addr = (port ? GRCBASE_EMAC1 : GRCBASE_EMAC0);
@@ -5099,10 +2597,10 @@ static void bnx2x_update_stats(struct bnx2x *bp)
if (!bnx2x_update_storm_stats(bp)) {
- if (bp->phy_flags & PHY_BMAC_FLAG) {
+ if (bp->link_vars.mac_type == MAC_TYPE_BMAC) {
bnx2x_update_bmac_stats(bp);
- } else if (bp->phy_flags & PHY_EMAC_FLAG) {
+ } else if (bp->link_vars.mac_type == MAC_TYPE_EMAC) {
bnx2x_update_emac_stats(bp);
} else { /* unreached */
@@ -6568,7 +4066,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
break;
}
- bnx2x_link_reset(bp);
+ bnx2x__link_reset(bp);
/* Reset PCIE errors for debug */
REG_WR(bp, 0x2114, 0xffffffff);
@@ -7210,7 +4708,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
bnx2x_set_mac_addr(bp);
- bnx2x_phy_init(bp);
+ bnx2x_initial_phy_init(bp);
/* Start fast path */
if (req_irq) { /* IRQ is only requested from bnx2x_open */
@@ -7435,7 +4933,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq)
}
unload_error:
- bnx2x_link_reset(bp);
+ bnx2x__link_reset(bp);
if (!nomcp)
reset_code = bnx2x_fw_command(bp, reset_code);
@@ -7477,13 +4975,12 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
int port = bp->port;
u32 ext_phy_type;
- bp->phy_flags = 0;
-
switch (switch_cfg) {
case SWITCH_CFG_1G:
BNX2X_DEV_INFO("switch_cfg 0x%x (1G)\n", switch_cfg);
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
+ ext_phy_type =
+ SERDES_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
@@ -7505,8 +5002,6 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
BNX2X_DEV_INFO("ext_phy_type 0x%x (5482)\n",
ext_phy_type);
- bp->phy_flags |= PHY_SGMII_FLAG;
-
bp->supported |= (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
@@ -7521,7 +5016,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
default:
BNX2X_ERR("NVRAM config error. "
"BAD SerDes ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ bp->link_params.ext_phy_config);
return;
}
@@ -7533,9 +5028,8 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
case SWITCH_CFG_10G:
BNX2X_DEV_INFO("switch_cfg 0x%x (10G)\n", switch_cfg);
- bp->phy_flags |= PHY_XGXS_FLAG;
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ ext_phy_type =
+ XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
@@ -7588,6 +5082,19 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_Asym_Pause);
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_2500baseX_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
ext_phy_type);
@@ -7599,10 +5106,15 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_Asym_Pause);
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
+ BNX2X_ERR("XGXS PHY Failure detected 0x%x\n",
+ bp->link_params.ext_phy_config);
+ break;
+
default:
BNX2X_ERR("NVRAM config error. "
"BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ bp->link_params.ext_phy_config);
return;
}
@@ -7610,17 +5122,6 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
port*0x18);
BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->phy_addr);
- bp->ser_lane = ((bp->lane_config &
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
- bp->rx_lane_swap = ((bp->lane_config &
- PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT);
- bp->tx_lane_swap = ((bp->lane_config &
- PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT);
- BNX2X_DEV_INFO("rx_lane_swap 0x%x tx_lane_swap 0x%x\n",
- bp->rx_lane_swap, bp->tx_lane_swap);
break;
default:
@@ -7628,32 +5129,36 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
bp->link_config);
return;
}
+ bp->link_params.phy_addr = bp->phy_addr;
/* mask what we support according to speed_cap_mask */
- if (!(bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
bp->supported &= ~SUPPORTED_10baseT_Half;
- if (!(bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
bp->supported &= ~SUPPORTED_10baseT_Full;
- if (!(bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
bp->supported &= ~SUPPORTED_100baseT_Half;
- if (!(bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
bp->supported &= ~SUPPORTED_100baseT_Full;
- if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
bp->supported &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
bp->supported &= ~SUPPORTED_2500baseX_Full;
- if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
bp->supported &= ~SUPPORTED_10000baseT_Full;
BNX2X_DEV_INFO("supported 0x%x\n", bp->supported);
@@ -7661,20 +5166,23 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
static void bnx2x_link_settings_requested(struct bnx2x *bp)
{
- bp->req_autoneg = 0;
- bp->req_duplex = DUPLEX_FULL;
+ bp->link_params.req_duplex = DUPLEX_FULL;
switch (bp->link_config & PORT_FEATURE_LINK_SPEED_MASK) {
case PORT_FEATURE_LINK_SPEED_AUTO:
if (bp->supported & SUPPORTED_Autoneg) {
- bp->req_autoneg |= AUTONEG_SPEED;
- bp->req_line_speed = 0;
+ bp->link_params.req_line_speed = SPEED_AUTO_NEG;
bp->advertising = bp->supported;
} else {
- if (XGXS_EXT_PHY_TYPE(bp) ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) {
+ u32 ext_phy_type =
+ XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+
+ if ((ext_phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
+ (ext_phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
/* force 10G, no AN */
- bp->req_line_speed = SPEED_10000;
+ bp->link_params.req_line_speed = SPEED_10000;
bp->advertising =
(ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
@@ -7690,86 +5198,92 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
case PORT_FEATURE_LINK_SPEED_10M_FULL:
if (bp->supported & SUPPORTED_10baseT_Full) {
- bp->req_line_speed = SPEED_10;
+ bp->link_params.req_line_speed = SPEED_10;
bp->advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_10M_HALF:
if (bp->supported & SUPPORTED_10baseT_Half) {
- bp->req_line_speed = SPEED_10;
- bp->req_duplex = DUPLEX_HALF;
+ bp->link_params.req_line_speed = SPEED_10;
+ bp->link_params.req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_100M_FULL:
if (bp->supported & SUPPORTED_100baseT_Full) {
- bp->req_line_speed = SPEED_100;
+ bp->link_params.req_line_speed = SPEED_100;
bp->advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
if (bp->supported & SUPPORTED_100baseT_Half) {
- bp->req_line_speed = SPEED_100;
- bp->req_duplex = DUPLEX_HALF;
+ bp->link_params.req_line_speed = SPEED_100;
+ bp->link_params.req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_1G:
if (bp->supported & SUPPORTED_1000baseT_Full) {
- bp->req_line_speed = SPEED_1000;
+ bp->link_params.req_line_speed = SPEED_1000;
bp->advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_2_5G:
if (bp->supported & SUPPORTED_2500baseX_Full) {
- bp->req_line_speed = SPEED_2500;
+ bp->link_params.req_line_speed = SPEED_2500;
bp->advertising = (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
@@ -7778,14 +5292,15 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
case PORT_FEATURE_LINK_SPEED_10G_KX4:
case PORT_FEATURE_LINK_SPEED_10G_KR:
if (bp->supported & SUPPORTED_10000baseT_Full) {
- bp->req_line_speed = SPEED_10000;
+ bp->link_params.req_line_speed = SPEED_10000;
bp->advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
@@ -7794,30 +5309,28 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
BNX2X_ERR("NVRAM config error. "
"BAD link speed link_config 0x%x\n",
bp->link_config);
- bp->req_autoneg |= AUTONEG_SPEED;
- bp->req_line_speed = 0;
+ bp->link_params.req_line_speed = SPEED_AUTO_NEG;
bp->advertising = bp->supported;
break;
}
- BNX2X_DEV_INFO("req_line_speed %d req_duplex %d\n",
- bp->req_line_speed, bp->req_duplex);
- bp->req_flow_ctrl = (bp->link_config &
+ bp->link_params.req_flow_ctrl = (bp->link_config &
PORT_FEATURE_FLOW_CONTROL_MASK);
- if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) &&
- (bp->supported & SUPPORTED_Autoneg))
- bp->req_autoneg |= AUTONEG_FLOW_CTRL;
+ if ((bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ (!bp->supported & SUPPORTED_Autoneg))
+ bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
- BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x"
+ BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x"
" advertising 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl, bp->advertising);
+ bp->link_params.req_line_speed,
+ bp->link_params.req_duplex,
+ bp->link_params.req_flow_ctrl, bp->advertising);
}
static void bnx2x_get_hwinfo(struct bnx2x *bp)
{
u32 val, val2, val3, val4, id;
int port = bp->port;
- u32 switch_cfg;
bp->shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
BNX2X_DEV_INFO("shmem offset is %x\n", bp->shmem_base);
@@ -7835,6 +5348,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
bp->chip_id = id;
BNX2X_DEV_INFO("chip ID is %x\n", id);
+ bp->link_params.bp = bp;
+
if (!bp->shmem_base || (bp->shmem_base != 0xAF900)) {
BNX2X_DEV_INFO("MCP not active\n");
nomcp = 1;
@@ -7851,35 +5366,32 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board);
- bp->serdes_config =
+ bp->link_params.serdes_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
- bp->lane_config =
+ bp->link_params.lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
- bp->ext_phy_config =
+ bp->link_params.ext_phy_config =
SHMEM_RD(bp,
dev_info.port_hw_config[port].external_phy_config);
- bp->speed_cap_mask =
+ bp->link_params.speed_cap_mask =
SHMEM_RD(bp,
dev_info.port_hw_config[port].speed_capability_mask);
bp->link_config =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
- BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n"
- KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n"
- KERN_INFO " speed_cap_mask (%08x) link_config (%08x)"
- " fw_seq (%08x)\n",
- bp->hw_config, bp->board, bp->serdes_config,
- bp->lane_config, bp->ext_phy_config,
- bp->speed_cap_mask, bp->link_config, bp->fw_seq);
-
- switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK);
- bnx2x_link_settings_supported(bp, switch_cfg);
+ BNX2X_DEV_INFO("serdes_config (%08x) lane_config (%08x)\n"
+ KERN_INFO " ext_phy_config (%08x) speed_cap_mask (%08x)"
+ " link_config (%08x)\n",
+ bp->link_params.serdes_config,
+ bp->link_params.lane_config,
+ bp->link_params.ext_phy_config,
+ bp->link_params.speed_cap_mask,
+ bp->link_config);
- bp->autoneg = (bp->hw_config & SHARED_HW_CFG_AN_ENABLE_MASK);
- /* for now disable cl73 */
- bp->autoneg &= ~SHARED_HW_CFG_AN_ENABLE_CL73;
- BNX2X_DEV_INFO("autoneg 0x%x\n", bp->autoneg);
+ bp->link_params.switch_cfg = (bp->link_config &
+ PORT_FEATURE_CONNECTED_SWITCH_MASK);
+ bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
bnx2x_link_settings_requested(bp);
@@ -7891,8 +5403,9 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
bp->dev->dev_addr[3] = (u8)(val >> 16 & 0xff);
bp->dev->dev_addr[4] = (u8)(val >> 8 & 0xff);
bp->dev->dev_addr[5] = (u8)(val & 0xff);
+ memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
+ memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
- memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6);
val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
@@ -7945,21 +5458,23 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->advertising = bp->advertising;
if (netif_carrier_ok(dev)) {
- cmd->speed = bp->line_speed;
- cmd->duplex = bp->duplex;
+ cmd->speed = bp->link_vars.line_speed;
+ cmd->duplex = bp->link_vars.duplex;
} else {
- cmd->speed = bp->req_line_speed;
- cmd->duplex = bp->req_duplex;
+ cmd->speed = bp->link_params.req_line_speed;
+ cmd->duplex = bp->link_params.req_duplex;
}
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ if (bp->link_params.switch_cfg == SWITCH_CFG_10G) {
+ u32 ext_phy_type =
+ XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
cmd->port = PORT_FIBRE;
break;
@@ -7967,9 +5482,15 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->port = PORT_TP;
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
+ BNX2X_ERR("XGXS PHY Failure detected 0x%x\n",
+ bp->link_params.ext_phy_config);
+ break;
+
default:
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ bp->link_params.ext_phy_config);
+ break;
}
} else
cmd->port = PORT_TP;
@@ -7977,7 +5498,7 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->phy_address = bp->phy_addr;
cmd->transceiver = XCVR_INTERNAL;
- if (bp->req_autoneg & AUTONEG_SPEED)
+ if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
cmd->autoneg = AUTONEG_ENABLE;
else
cmd->autoneg = AUTONEG_DISABLE;
@@ -8018,9 +5539,8 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
/* advertise the requested speed and duplex if supported */
cmd->advertising &= bp->supported;
- bp->req_autoneg |= AUTONEG_SPEED;
- bp->req_line_speed = 0;
- bp->req_duplex = DUPLEX_FULL;
+ bp->link_params.req_line_speed = SPEED_AUTO_NEG;
+ bp->link_params.req_duplex = DUPLEX_FULL;
bp->advertising |= (ADVERTISED_Autoneg | cmd->advertising);
} else { /* forced speed */
@@ -8126,34 +5646,45 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
- bp->req_autoneg &= ~AUTONEG_SPEED;
- bp->req_line_speed = cmd->speed;
- bp->req_duplex = cmd->duplex;
+ bp->link_params.req_line_speed = cmd->speed;
+ bp->link_params.req_duplex = cmd->duplex;
bp->advertising = advertising;
}
- DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_line_speed %d\n"
+ DP(NETIF_MSG_LINK, "req_line_speed %d\n"
DP_LEVEL " req_duplex %d advertising 0x%x\n",
- bp->req_autoneg, bp->req_line_speed, bp->req_duplex,
+ bp->link_params.req_line_speed, bp->link_params.req_duplex,
bp->advertising);
bnx2x_stop_stats(bp);
- bnx2x_link_initialize(bp);
+ bnx2x_link_set(bp);
return 0;
}
+#define PHY_FW_VER_LEN 10
+
static void bnx2x_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct bnx2x *bp = netdev_priv(dev);
+ char phy_fw_ver[PHY_FW_VER_LEN];
strcpy(info->driver, DRV_MODULE_NAME);
strcpy(info->version, DRV_MODULE_VERSION);
- snprintf(info->fw_version, 32, "%d.%d.%d:%d (BC VER %x)",
+
+ phy_fw_ver[0] = '\0';
+ bnx2x_phy_hw_lock(bp);
+ bnx2x_get_ext_phy_fw_version(&bp->link_params,
+ (bp->state != BNX2X_STATE_CLOSED),
+ phy_fw_ver, PHY_FW_VER_LEN);
+ bnx2x_phy_hw_unlock(bp);
+
+ snprintf(info->fw_version, 32, "%d.%d.%d:%d BC:%x%s%s",
BCM_5710_FW_MAJOR_VERSION, BCM_5710_FW_MINOR_VERSION,
- BCM_5710_FW_REVISION_VERSION, BCM_5710_FW_COMPILE_FLAGS,
- bp->bc_ver);
+ BCM_5710_FW_REVISION_VERSION,
+ BCM_5710_FW_COMPILE_FLAGS, bp->bc_ver,
+ ((phy_fw_ver[0] != '\0')? " PHY:":""), phy_fw_ver);
strcpy(info->bus_info, pci_name(bp->pdev));
info->n_stats = BNX2X_NUM_STATS;
info->testinfo_len = BNX2X_NUM_TESTS;
@@ -8221,7 +5752,7 @@ static int bnx2x_nway_reset(struct net_device *dev)
}
bnx2x_stop_stats(bp);
- bnx2x_link_initialize(bp);
+ bnx2x_link_set(bp);
return 0;
}
@@ -8605,7 +6136,22 @@ static int bnx2x_set_eeprom(struct net_device *dev,
/* parameters already validated in ethtool_set_eeprom */
- rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len);
+ /* If the magic number is PHY (0x00504859) upgrade the PHY FW */
+ if (eeprom->magic == 0x00504859) {
+
+ bnx2x_phy_hw_lock(bp);
+ rc = bnx2x_flash_download(bp, bp->port,
+ bp->link_params.ext_phy_config,
+ (bp->state != BNX2X_STATE_CLOSED),
+ eebuf, eeprom->len);
+ rc |= bnx2x_link_reset(&bp->link_params,
+ &bp->link_vars);
+ rc |= bnx2x_phy_init(&bp->link_params,
+ &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
+
+ } else
+ rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len);
return rc;
}
@@ -8691,10 +6237,13 @@ static void bnx2x_get_pauseparam(struct net_device *dev,
{
struct bnx2x *bp = netdev_priv(dev);
- epause->autoneg =
- ((bp->req_autoneg & AUTONEG_FLOW_CTRL) == AUTONEG_FLOW_CTRL);
- epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) == FLOW_CTRL_RX);
- epause->tx_pause = ((bp->flow_ctrl & FLOW_CTRL_TX) == FLOW_CTRL_TX);
+ epause->autoneg = (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ (bp->link_params.req_line_speed == SPEED_AUTO_NEG);
+
+ epause->rx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_RX) ==
+ FLOW_CTRL_RX);
+ epause->tx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_TX) ==
+ FLOW_CTRL_TX);
DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n"
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
@@ -8710,32 +6259,31 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
- if (epause->autoneg) {
- if (!(bp->supported & SUPPORTED_Autoneg)) {
- DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
- return -EINVAL;
- }
-
- bp->req_autoneg |= AUTONEG_FLOW_CTRL;
- } else
- bp->req_autoneg &= ~AUTONEG_FLOW_CTRL;
-
- bp->req_flow_ctrl = FLOW_CTRL_AUTO;
+ bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO;
if (epause->rx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_RX;
+ bp->link_params.req_flow_ctrl |= FLOW_CTRL_RX;
+
if (epause->tx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_TX;
+ bp->link_params.req_flow_ctrl |= FLOW_CTRL_TX;
- if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
- (bp->req_flow_ctrl == FLOW_CTRL_AUTO))
- bp->req_flow_ctrl = FLOW_CTRL_NONE;
+ if (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO)
+ bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
- DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl);
+ if (epause->autoneg) {
+ if (!(bp->supported & SUPPORTED_Autoneg)) {
+ DP(NETIF_MSG_LINK, "Autoneg not supported\n");
+ return -EINVAL;
+ }
+
+ if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
+ bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO;
+ }
+ DP(NETIF_MSG_LINK,
+ "req_flow_ctrl 0x%x\n", bp->link_params.req_flow_ctrl);
bnx2x_stop_stats(bp);
- bnx2x_link_initialize(bp);
+ bnx2x_link_set(bp);
return 0;
}
@@ -8943,18 +6491,25 @@ static int bnx2x_phys_id(struct net_device *dev, u32 data)
data = 2;
for (i = 0; i < (data * 2); i++) {
- if ((i % 2) == 0) {
- bnx2x_leds_set(bp, SPEED_1000);
- } else {
- bnx2x_leds_unset(bp);
- }
+ if ((i % 2) == 0)
+ bnx2x_set_led(bp, bp->port, LED_MODE_OPER, SPEED_1000,
+ bp->link_params.hw_led_mode,
+ bp->link_params.chip_id);
+ else
+ bnx2x_set_led(bp, bp->port, LED_MODE_OFF, 0,
+ bp->link_params.hw_led_mode,
+ bp->link_params.chip_id);
+
msleep_interruptible(500);
if (signal_pending(current))
break;
}
- if (bp->link_up)
- bnx2x_leds_set(bp, bp->line_speed);
+ if (bp->link_vars.link_up)
+ bnx2x_set_led(bp, bp->port, LED_MODE_OPER,
+ bp->link_vars.line_speed,
+ bp->link_params.hw_led_mode,
+ bp->link_params.chip_id);
return 0;
}
@@ -9470,7 +7025,7 @@ static int bnx2x_change_mac_addr(struct net_device *dev, void *p)
return 0;
}
-/* Called with rtnl_lock */
+/* called with rtnl_lock */
static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = if_mii(ifr);
@@ -9482,19 +7037,19 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
data->phy_id = bp->phy_addr;
/* fallthrough */
+
case SIOCGMIIREG: {
- u32 mii_regval;
+ u16 mii_regval;
- spin_lock_bh(&bp->phy_lock);
- if (bp->state == BNX2X_STATE_OPEN) {
- err = bnx2x_mdio22_read(bp, data->reg_num & 0x1f,
- &mii_regval);
+ if (!netif_running(dev))
+ return -EAGAIN;
- data->val_out = mii_regval;
- } else {
- err = -EAGAIN;
- }
- spin_unlock_bh(&bp->phy_lock);
+ mutex_lock(&bp->phy_mutex);
+ err = bnx2x_cl45_read(bp, bp->port, 0, bp->phy_addr,
+ DEFAULT_PHY_DEV_ADDR,
+ (data->reg_num & 0x1f), &mii_regval);
+ data->val_out = mii_regval;
+ mutex_unlock(&bp->phy_mutex);
return err;
}
@@ -9502,14 +7057,14 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- spin_lock_bh(&bp->phy_lock);
- if (bp->state == BNX2X_STATE_OPEN) {
- err = bnx2x_mdio22_write(bp, data->reg_num & 0x1f,
- data->val_in);
- } else {
- err = -EAGAIN;
- }
- spin_unlock_bh(&bp->phy_lock);
+ if (!netif_running(dev))
+ return -EAGAIN;
+
+ mutex_lock(&bp->phy_mutex);
+ err = bnx2x_cl45_write(bp, bp->port, 0, bp->phy_addr,
+ DEFAULT_PHY_DEV_ADDR,
+ (data->reg_num & 0x1f), data->val_in);
+ mutex_unlock(&bp->phy_mutex);
return err;
default:
@@ -9682,8 +7237,6 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev,
bp->dev = dev;
bp->pdev = pdev;
- spin_lock_init(&bp->phy_lock);
-
INIT_WORK(&bp->reset_task, bnx2x_reset_task);
INIT_WORK(&bp->sp_task, bnx2x_sp_task);