summaryrefslogtreecommitdiffstats
path: root/drivers/net/defxx.c
diff options
context:
space:
mode:
authorMaciej W. Rozycki <macro@linux-mips.org>2006-10-23 13:53:17 +0100
committerJeff Garzik <jeff@garzik.org>2006-12-02 00:12:01 -0500
commitb2e68aa337f950e4a8c893a82b95b1755309bc56 (patch)
tree4f7696e09d08cb173306e68bfdc4dc98aa97ef0b /drivers/net/defxx.c
parentc3a9392e4f3b9d97803b067871d66bc143369dbf (diff)
downloadlinux-b2e68aa337f950e4a8c893a82b95b1755309bc56.tar.gz
linux-b2e68aa337f950e4a8c893a82b95b1755309bc56.tar.bz2
linux-b2e68aa337f950e4a8c893a82b95b1755309bc56.zip
[PATCH] defxx: Big-endian hosts support
The PDQ DMA engine requires a different byte-swapping mode for big-endian hosts; also the MAC address which is read from a register through PIO has to be byte-swapped. These changes have been verified with DEFPA-DC (PCI) boards and a Broadcom BCM91250A (MIPS CPU based) host. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/defxx.c')
-rw-r--r--drivers/net/defxx.c39
1 files changed, 19 insertions, 20 deletions
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 8f514cc0debd..dc3ab3b5c8cb 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -192,6 +192,7 @@
* 04 Aug 2003 macro Converted to the DMA API.
* 14 Aug 2004 macro Fix device names reported.
* 14 Jun 2005 macro Use irqreturn_t.
+ * 23 Oct 2006 macro Big-endian host support.
*/
/* Include files */
@@ -218,8 +219,8 @@
/* Version information string should be updated prior to each new release! */
#define DRV_NAME "defxx"
-#define DRV_VERSION "v1.08"
-#define DRV_RELDATE "2005/06/14"
+#define DRV_VERSION "v1.09"
+#define DRV_RELDATE "2006/10/23"
static char version[] __devinitdata =
DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
@@ -859,6 +860,7 @@ static int __devinit dfx_driver_init(struct net_device *dev,
print_name);
return(DFX_K_FAILURE);
}
+ data = cpu_to_le32(data);
memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32));
if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
@@ -867,6 +869,7 @@ static int __devinit dfx_driver_init(struct net_device *dev,
print_name);
return(DFX_K_FAILURE);
}
+ data = cpu_to_le32(data);
memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16));
/*
@@ -1085,27 +1088,23 @@ static int dfx_adap_init(DFX_board_t *bp, int get_buffers)
}
/*
- * Set base address of Descriptor Block and bring adapter to DMA_AVAILABLE state
+ * Set the base address of Descriptor Block and bring adapter
+ * to DMA_AVAILABLE state.
*
- * Note: We also set the literal and data swapping requirements in this
- * command. Since this driver presently runs on Intel platforms
- * which are Little Endian, we'll tell the adapter to byte swap
- * data only. This code will need to change when we support
- * Big Endian systems (eg. PowerPC).
+ * Note: We also set the literal and data swapping requirements
+ * in this command.
*
- * Assumption: 32-bit physical address of descriptor block is 8Kbyte
- * aligned. That is, bits 0-12 of the address must be zero.
+ * Assumption: 32-bit physical address of descriptor block
+ * is 8Kbyte aligned.
*/
-
- if (dfx_hw_port_ctrl_req(bp,
- PI_PCTRL_M_INIT,
- (u32) (bp->descr_block_phys | PI_PDATA_A_INIT_M_BSWAP_DATA),
- 0,
- NULL) != DFX_K_SUCCESS)
- {
- printk("%s: Could not set descriptor block address!\n", bp->dev->name);
- return(DFX_K_FAILURE);
- }
+ if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_INIT,
+ (u32)(bp->descr_block_phys |
+ PI_PDATA_A_INIT_M_BSWAP_INIT),
+ 0, NULL) != DFX_K_SUCCESS) {
+ printk("%s: Could not set descriptor block address!\n",
+ bp->dev->name);
+ return DFX_K_FAILURE;
+ }
/* Set transmit flush timeout value */