Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

5 files changed, 211 insertions, 5 deletions

diff --git a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
index e8682855b73a..c1fe245bb07e 100644
--- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
@@ -29,6 +29,7 @@
 
 /* Chipcommon Core Chip IDs */
 #define BCM4313_CHIP_ID		0x4313
+#define BCM43143_CHIP_ID	43143
 #define BCM43224_CHIP_ID	43224
 #define BCM43225_CHIP_ID	43225
 #define BCM43235_CHIP_ID	43235
@@ -39,5 +40,6 @@
 #define BCM4330_CHIP_ID		0x4330
 #define BCM4331_CHIP_ID		0x4331
 #define BCM4334_CHIP_ID		0x4334
+#define BCM4335_CHIP_ID		0x4335
 
 #endif				/* _BRCM_HW_IDS_H_ */
diff --git a/drivers/net/wireless/brcm80211/include/brcmu_d11.h b/drivers/net/wireless/brcm80211/include/brcmu_d11.h
new file mode 100644
index 000000000000..92623f02b1c0
--- /dev/null
+++ b/drivers/net/wireless/brcm80211/include/brcmu_d11.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef	_BRCMU_D11_H_
+#define	_BRCMU_D11_H_
+
+/* d11 io type */
+#define BRCMU_D11N_IOTYPE		1
+#define BRCMU_D11AC_IOTYPE		2
+
+/* A chanspec (channel specification) holds the channel number, band,
+ * bandwidth and control sideband
+ */
+
+/* chanspec binary format */
+
+#define BRCMU_CHSPEC_INVALID		255
+/* bit 0~7 channel number
+ * for 80+80 channels: bit 0~3 low channel id, bit 4~7 high channel id
+ */
+#define BRCMU_CHSPEC_CH_MASK		0x00ff
+#define BRCMU_CHSPEC_CH_SHIFT		0
+#define BRCMU_CHSPEC_CHL_MASK		0x000f
+#define BRCMU_CHSPEC_CHL_SHIFT		0
+#define BRCMU_CHSPEC_CHH_MASK		0x00f0
+#define BRCMU_CHSPEC_CHH_SHIFT		4
+
+/* bit 8~16 for dot 11n IO types
+ * bit 8~9 sideband
+ * bit 10~11 bandwidth
+ * bit 12~13 spectral band
+ * bit 14~15 not used
+ */
+#define BRCMU_CHSPEC_D11N_SB_MASK	0x0300
+#define BRCMU_CHSPEC_D11N_SB_SHIFT	8
+#define  BRCMU_CHSPEC_D11N_SB_L		0x0100	/* control lower */
+#define  BRCMU_CHSPEC_D11N_SB_U		0x0200	/* control upper */
+#define  BRCMU_CHSPEC_D11N_SB_N		0x0300	/* none */
+#define BRCMU_CHSPEC_D11N_BW_MASK	0x0c00
+#define BRCMU_CHSPEC_D11N_BW_SHIFT	10
+#define  BRCMU_CHSPEC_D11N_BW_10	0x0400
+#define  BRCMU_CHSPEC_D11N_BW_20	0x0800
+#define  BRCMU_CHSPEC_D11N_BW_40	0x0c00
+#define BRCMU_CHSPEC_D11N_BND_MASK	0x3000
+#define BRCMU_CHSPEC_D11N_BND_SHIFT	12
+#define  BRCMU_CHSPEC_D11N_BND_5G	0x1000
+#define  BRCMU_CHSPEC_D11N_BND_2G	0x2000
+
+/* bit 8~16 for dot 11ac IO types
+ * bit 8~10 sideband
+ * bit 11~13 bandwidth
+ * bit 14~15 spectral band
+ */
+#define BRCMU_CHSPEC_D11AC_SB_MASK	0x0700
+#define BRCMU_CHSPEC_D11AC_SB_SHIFT	8
+#define  BRCMU_CHSPEC_D11AC_SB_LLL	0x0000
+#define  BRCMU_CHSPEC_D11AC_SB_LLU	0x0100
+#define  BRCMU_CHSPEC_D11AC_SB_LUL	0x0200
+#define  BRCMU_CHSPEC_D11AC_SB_LUU	0x0300
+#define  BRCMU_CHSPEC_D11AC_SB_ULL	0x0400
+#define  BRCMU_CHSPEC_D11AC_SB_ULU	0x0500
+#define  BRCMU_CHSPEC_D11AC_SB_UUL	0x0600
+#define  BRCMU_CHSPEC_D11AC_SB_UUU	0x0700
+#define  BRCMU_CHSPEC_D11AC_SB_LL	BRCMU_CHSPEC_D11AC_SB_LLL
+#define  BRCMU_CHSPEC_D11AC_SB_LU	BRCMU_CHSPEC_D11AC_SB_LLU
+#define  BRCMU_CHSPEC_D11AC_SB_UL	BRCMU_CHSPEC_D11AC_SB_LUL
+#define  BRCMU_CHSPEC_D11AC_SB_UU	BRCMU_CHSPEC_D11AC_SB_LUU
+#define  BRCMU_CHSPEC_D11AC_SB_L	BRCMU_CHSPEC_D11AC_SB_LLL
+#define  BRCMU_CHSPEC_D11AC_SB_U	BRCMU_CHSPEC_D11AC_SB_LLU
+#define BRCMU_CHSPEC_D11AC_BW_MASK	0x3800
+#define BRCMU_CHSPEC_D11AC_BW_SHIFT	11
+#define  BRCMU_CHSPEC_D11AC_BW_5	0x0000
+#define  BRCMU_CHSPEC_D11AC_BW_10	0x0800
+#define  BRCMU_CHSPEC_D11AC_BW_20	0x1000
+#define  BRCMU_CHSPEC_D11AC_BW_40	0x1800
+#define  BRCMU_CHSPEC_D11AC_BW_80	0x2000
+#define  BRCMU_CHSPEC_D11AC_BW_160	0x2800
+#define  BRCMU_CHSPEC_D11AC_BW_8080	0x3000
+#define BRCMU_CHSPEC_D11AC_BND_MASK	0xc000
+#define BRCMU_CHSPEC_D11AC_BND_SHIFT	14
+#define  BRCMU_CHSPEC_D11AC_BND_2G	0x0000
+#define  BRCMU_CHSPEC_D11AC_BND_3G	0x4000
+#define  BRCMU_CHSPEC_D11AC_BND_4G	0x8000
+#define  BRCMU_CHSPEC_D11AC_BND_5G	0xc000
+
+#define BRCMU_CHAN_BAND_2G		0
+#define BRCMU_CHAN_BAND_5G		1
+
+enum brcmu_chan_bw {
+	BRCMU_CHAN_BW_20,
+	BRCMU_CHAN_BW_40,
+	BRCMU_CHAN_BW_80,
+	BRCMU_CHAN_BW_80P80,
+	BRCMU_CHAN_BW_160,
+};
+
+enum brcmu_chan_sb {
+	BRCMU_CHAN_SB_NONE = 0,
+	BRCMU_CHAN_SB_L,
+	BRCMU_CHAN_SB_U,
+	BRCMU_CHAN_SB_LL,
+	BRCMU_CHAN_SB_LU,
+	BRCMU_CHAN_SB_UL,
+	BRCMU_CHAN_SB_UU,
+	BRCMU_CHAN_SB_LLL,
+	BRCMU_CHAN_SB_LLU,
+	BRCMU_CHAN_SB_LUL,
+	BRCMU_CHAN_SB_LUU,
+	BRCMU_CHAN_SB_ULL,
+	BRCMU_CHAN_SB_ULU,
+	BRCMU_CHAN_SB_UUL,
+	BRCMU_CHAN_SB_UUU,
+};
+
+struct brcmu_chan {
+	u16 chspec;
+	u8 chnum;
+	u8 band;
+	enum brcmu_chan_bw bw;
+	enum brcmu_chan_sb sb;
+};
+
+struct brcmu_d11inf {
+	u8 io_type;
+
+	void (*encchspec)(struct brcmu_chan *ch);
+	void (*decchspec)(struct brcmu_chan *ch);
+};
+
+extern void brcmu_d11_attach(struct brcmu_d11inf *d11inf);
+
+#endif	/* _BRCMU_CHANNELS_H_ */
diff --git a/drivers/net/wireless/brcm80211/include/brcmu_utils.h b/drivers/net/wireless/brcm80211/include/brcmu_utils.h
index 477b92ad3d62..898cacb8d01d 100644
--- a/drivers/net/wireless/brcm80211/include/brcmu_utils.h
+++ b/drivers/net/wireless/brcm80211/include/brcmu_utils.h
@@ -120,6 +120,10 @@ extern struct sk_buff *brcmu_pktq_penq_head(struct pktq *pq, int prec,
 				      struct sk_buff *p);
 extern struct sk_buff *brcmu_pktq_pdeq(struct pktq *pq, int prec);
 extern struct sk_buff *brcmu_pktq_pdeq_tail(struct pktq *pq, int prec);
+extern struct sk_buff *brcmu_pktq_pdeq_match(struct pktq *pq, int prec,
+					     bool (*match_fn)(struct sk_buff *p,
+							      void *arg),
+					     void *arg);
 
 /* packet primitives */
 extern struct sk_buff *brcmu_pkt_buf_get_skb(uint len);
@@ -173,6 +177,29 @@ extern void brcmu_pktq_flush(struct pktq *pq, bool dir,
 /* ip address */
 struct ipv4_addr;
 
+/*
+ * bitfield macros using masking and shift
+ *
+ * remark: the mask parameter should be a shifted mask.
+ */
+static inline void brcmu_maskset32(u32 *var, u32 mask, u8 shift, u32 value)
+{
+	value = (value << shift) & mask;
+	*var = (*var & ~mask) | value;
+}
+static inline u32 brcmu_maskget32(u32 var, u32 mask, u8 shift)
+{
+	return (var & mask) >> shift;
+}
+static inline void brcmu_maskset16(u16 *var, u16 mask, u8 shift, u16 value)
+{
+	value = (value << shift) & mask;
+	*var = (*var & ~mask) | value;
+}
+static inline u16 brcmu_maskget16(u16 var, u16 mask, u8 shift)
+{
+	return (var & mask) >> shift;
+}
 
 /* externs */
 /* format/print */
diff --git a/drivers/net/wireless/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/brcm80211/include/brcmu_wifi.h
index c11a290a1edf..0505cc065e0d 100644
--- a/drivers/net/wireless/brcm80211/include/brcmu_wifi.h
+++ b/drivers/net/wireless/brcm80211/include/brcmu_wifi.h
@@ -32,8 +32,9 @@
 #define CH_20MHZ_APART			4
 #define CH_10MHZ_APART			2
 #define CH_5MHZ_APART			1 /* 2G band channels are 5 Mhz apart */
+#define CH_MIN_2G_CHANNEL		1
 #define CH_MAX_2G_CHANNEL		14	/* Max channel in 2G band */
-#define BRCM_MAX_2G_CHANNEL	CH_MAX_2G_CHANNEL	/* legacy define */
+#define CH_MIN_5G_CHANNEL		34
 
 /* bandstate array indices */
 #define BAND_2G_INDEX		0	/* wlc->bandstate[x] index */
@@ -60,6 +61,7 @@
 #define WL_CHANSPEC_BW_10		0x0400
 #define WL_CHANSPEC_BW_20		0x0800
 #define WL_CHANSPEC_BW_40		0x0C00
+#define WL_CHANSPEC_BW_80		0x2000
 
 #define WL_CHANSPEC_BAND_MASK		0xf000
 #define WL_CHANSPEC_BAND_SHIFT		12
@@ -67,6 +69,25 @@
 #define WL_CHANSPEC_BAND_2G		0x2000
 #define INVCHANSPEC			255
 
+#define WL_CHAN_VALID_HW		(1 << 0) /* valid with current HW */
+#define WL_CHAN_VALID_SW		(1 << 1) /* valid with country sett. */
+#define WL_CHAN_BAND_5G			(1 << 2) /* 5GHz-band channel */
+#define WL_CHAN_RADAR			(1 << 3) /* radar sensitive  channel */
+#define WL_CHAN_INACTIVE		(1 << 4) /* inactive due to radar */
+#define WL_CHAN_PASSIVE			(1 << 5) /* channel in passive mode */
+#define WL_CHAN_RESTRICTED		(1 << 6) /* restricted use channel */
+
+/* values for band specific 40MHz capabilities  */
+#define WLC_N_BW_20ALL			0
+#define WLC_N_BW_40ALL			1
+#define WLC_N_BW_20IN2G_40IN5G		2
+
+/* band types */
+#define	WLC_BAND_AUTO			0	/* auto-select */
+#define	WLC_BAND_5G			1	/* 5 Ghz */
+#define	WLC_BAND_2G			2	/* 2.4 Ghz */
+#define	WLC_BAND_ALL			3	/* all bands */
+
 #define CHSPEC_CHANNEL(chspec)	((u8)((chspec) & WL_CHANSPEC_CHAN_MASK))
 #define CHSPEC_BAND(chspec)	((chspec) & WL_CHANSPEC_BAND_MASK)
 
@@ -79,10 +100,11 @@
 #define CHSPEC_IS20(chspec) \
 	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20)
 
-#ifndef CHSPEC_IS40
 #define CHSPEC_IS40(chspec) \
 	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)
-#endif
+
+#define CHSPEC_IS80(chspec) \
+	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_80)
 
 #define CHSPEC_IS5G(chspec) \
 	(((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G)
diff --git a/drivers/net/wireless/brcm80211/include/chipcommon.h b/drivers/net/wireless/brcm80211/include/chipcommon.h
index f96834a7c055..d242333b7559 100644
--- a/drivers/net/wireless/brcm80211/include/chipcommon.h
+++ b/drivers/net/wireless/brcm80211/include/chipcommon.h
@@ -205,7 +205,7 @@ struct chipcregs {
 	u32 res_req_timer_sel;
 	u32 res_req_timer;
 	u32 res_req_mask;
-	u32 PAD;
+	u32 pmucapabilities_ext; /* 0x64c, pmurev >=15 */
 	u32 chipcontrol_addr;	/* 0x650 */
 	u32 chipcontrol_data;	/* 0x654 */
 	u32 regcontrol_addr;
@@ -214,7 +214,11 @@ struct chipcregs {
 	u32 pllcontrol_data;
 	u32 pmustrapopt;	/* 0x668, corerev >= 28 */
 	u32 pmu_xtalfreq;	/* 0x66C, pmurev >= 10 */
-	u32 PAD[100];
+	u32 retention_ctl;          /* 0x670, pmurev >= 15 */
+	u32 PAD[3];
+	u32 retention_grpidx;       /* 0x680 */
+	u32 retention_grpctl;       /* 0x684 */
+	u32 PAD[94];
 	u16 sromotp[768];
 };
 
@@ -276,6 +280,12 @@ struct chipcregs {
 #define PCAP5_VC_SHIFT	22
 #define PCAP5_CC_MASK	0xf8000000
 #define PCAP5_CC_SHIFT	27
+/* pmucapabilites_ext PMU rev >= 15 */
+#define PCAPEXT_SR_SUPPORTED_MASK	(1 << 1)
+/* retention_ctl PMU rev >= 15 */
+#define PMU_RCTL_MACPHY_DISABLE_MASK        (1 << 26)
+#define PMU_RCTL_LOGIC_DISABLE_MASK         (1 << 27)
+
 
 /*
 * Maximum delay for the PMU state transition in us.