diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-05-25 13:28:20 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-05-25 13:28:20 +0200 |
commit | ca681aa49200422a4144ee376a2079a9f717bf11 (patch) | |
tree | de603ed4c5463ebdccc1841685209267b7b7a046 /drivers/phy/amlogic | |
parent | 14f3a5ccacdb4268764474d834ee353219dbd1a2 (diff) | |
parent | 1c11e74e9079289d8aaccc34b74cbf6463c0b791 (diff) | |
download | linux-ca681aa49200422a4144ee376a2079a9f717bf11.tar.gz linux-ca681aa49200422a4144ee376a2079a9f717bf11.tar.bz2 linux-ca681aa49200422a4144ee376a2079a9f717bf11.zip |
Merge tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.8 merge window
Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.
Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits)
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
usb: dwc3: gadget: Check for prepared TRBs
usb: gadget: Fix issue with config_ep_by_speed function
usb: cdns3: ep0: delete the redundant status stage
usb: dwc2: Update Core Reset programming flow.
usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
usb: gadget: fix potential double-free in m66592_probe.
usb: cdns3: Fix runtime PM imbalance on error
usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
usb: dwc3: Increase timeout for CmdAct cleared by device controller
USB: dummy-hcd: use configurable endpoint naming scheme
usb: cdns3: gadget: assign interrupt number to USB gadget structure
usb: gadget: core: sync interrupt before unbind the udc
arm64: dts: qcom: sc7180: Add interconnect properties for USB
arm64: dts: qcom: sdm845: Add interconnect properties for USB
dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
ARM: dts: at91: Remove the USB EP child node
dt-bindings: usb: atmel: Mark EP child node as deprecated
...
Diffstat (limited to 'drivers/phy/amlogic')
-rw-r--r-- | drivers/phy/amlogic/Kconfig | 12 | ||||
-rw-r--r-- | drivers/phy/amlogic/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/amlogic/phy-meson-gxl-usb3.c | 283 |
3 files changed, 0 insertions, 296 deletions
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index 5ec53874d1ea..617cf073e9aa 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -27,18 +27,6 @@ config PHY_MESON_GXL_USB2 GXL and GXM SoCs. If unsure, say N. -config PHY_MESON_GXL_USB3 - tristate "Meson GXL and GXM USB3 PHY drivers" - default ARCH_MESON - depends on OF && (ARCH_MESON || COMPILE_TEST) - depends on USB_SUPPORT - select GENERIC_PHY - select REGMAP_MMIO - help - Enable this to support the Meson USB3 PHY and OTG detection - IP block found in Meson GXL and GXM SoCs. - If unsure, say N. - config PHY_MESON_G12A_USB2 tristate "Meson G12A USB2 PHY driver" default ARCH_MESON diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index e2baa133f7af..99702a45e9be 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -2,7 +2,6 @@ obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o -obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb3.c b/drivers/phy/amlogic/phy-meson-gxl-usb3.c deleted file mode 100644 index c0e9e4c16149..000000000000 --- a/drivers/phy/amlogic/phy-meson-gxl-usb3.c +++ /dev/null @@ -1,283 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Meson GXL USB3 PHY and OTG mode detection driver - * - * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> - */ - -#include <linux/bitfield.h> -#include <linux/bitops.h> -#include <linux/clk.h> -#include <linux/module.h> -#include <linux/of_device.h> -#include <linux/phy/phy.h> -#include <linux/regmap.h> -#include <linux/reset.h> -#include <linux/platform_device.h> - -#define USB_R0 0x00 - #define USB_R0_P30_FSEL_MASK GENMASK(5, 0) - #define USB_R0_P30_PHY_RESET BIT(6) - #define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7) - #define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8) - #define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9) - #define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14) - #define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17) - #define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18) - #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19) - #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29) - #define USB_R0_U2D_ACT BIT(31) - -#define USB_R1 0x04 - #define USB_R1_U3H_BIGENDIAN_GS BIT(0) - #define USB_R1_U3H_PME_ENABLE BIT(1) - #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2) - #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7) - #define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12) - #define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16) - #define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17) - #define USB_R1_U3H_HOST_MSI_ENABLE BIT(18) - #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19) - #define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25) - -#define USB_R2 0x08 - #define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0) - #define USB_R2_P30_CR_READ BIT(16) - #define USB_R2_P30_CR_WRITE BIT(17) - #define USB_R2_P30_CR_CAP_ADDR BIT(18) - #define USB_R2_P30_CR_CAP_DATA BIT(19) - #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20) - #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26) - -#define USB_R3 0x0c - #define USB_R3_P30_SSC_ENABLE BIT(0) - #define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1) - #define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4) - #define USB_R3_P30_REF_SSP_EN BIT(13) - #define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16) - #define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19) - #define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24) - -#define USB_R4 0x10 - #define USB_R4_P21_PORT_RESET_0 BIT(0) - #define USB_R4_P21_SLEEP_M0 BIT(1) - #define USB_R4_MEM_PD_MASK GENMASK(3, 2) - #define USB_R4_P21_ONLY BIT(4) - -#define USB_R5 0x14 - #define USB_R5_ID_DIG_SYNC BIT(0) - #define USB_R5_ID_DIG_REG BIT(1) - #define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2) - #define USB_R5_ID_DIG_EN_0 BIT(4) - #define USB_R5_ID_DIG_EN_1 BIT(5) - #define USB_R5_ID_DIG_CURR BIT(6) - #define USB_R5_ID_DIG_IRQ BIT(7) - #define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8) - #define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16) - -/* read-only register */ -#define USB_R6 0x18 - #define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0) - #define USB_R6_P30_CR_ACK BIT(16) - -struct phy_meson_gxl_usb3_priv { - struct regmap *regmap; - enum phy_mode mode; - struct clk *clk_phy; - struct clk *clk_peripheral; - struct reset_control *reset; -}; - -static const struct regmap_config phy_meson_gxl_usb3_regmap_conf = { - .reg_bits = 8, - .val_bits = 32, - .reg_stride = 4, - .max_register = USB_R6, -}; - -static int phy_meson_gxl_usb3_power_on(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, - USB_R5_ID_DIG_EN_0); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, - USB_R5_ID_DIG_EN_1); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_TH_MASK, - FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff)); - - return 0; -} - -static int phy_meson_gxl_usb3_power_off(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, 0); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, 0); - - return 0; -} - -static int phy_meson_gxl_usb3_set_mode(struct phy *phy, - enum phy_mode mode, int submode) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - switch (mode) { - case PHY_MODE_USB_HOST: - regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, 0); - regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0, - 0); - break; - - case PHY_MODE_USB_DEVICE: - regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, - USB_R0_U2D_ACT); - regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0, - USB_R4_P21_SLEEP_M0); - break; - - default: - dev_err(&phy->dev, "unsupported PHY mode %d\n", mode); - return -EINVAL; - } - - priv->mode = mode; - - return 0; -} - -static int phy_meson_gxl_usb3_init(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - int ret; - - ret = reset_control_reset(priv->reset); - if (ret) - goto err; - - ret = clk_prepare_enable(priv->clk_phy); - if (ret) - goto err; - - ret = clk_prepare_enable(priv->clk_peripheral); - if (ret) - goto err_disable_clk_phy; - - ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode, 0); - if (ret) - goto err_disable_clk_peripheral; - - regmap_update_bits(priv->regmap, USB_R1, - USB_R1_U3H_FLADJ_30MHZ_REG_MASK, - FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20)); - - return 0; - -err_disable_clk_peripheral: - clk_disable_unprepare(priv->clk_peripheral); -err_disable_clk_phy: - clk_disable_unprepare(priv->clk_phy); -err: - return ret; -} - -static int phy_meson_gxl_usb3_exit(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - clk_disable_unprepare(priv->clk_peripheral); - clk_disable_unprepare(priv->clk_phy); - - return 0; -} - -static const struct phy_ops phy_meson_gxl_usb3_ops = { - .power_on = phy_meson_gxl_usb3_power_on, - .power_off = phy_meson_gxl_usb3_power_off, - .set_mode = phy_meson_gxl_usb3_set_mode, - .init = phy_meson_gxl_usb3_init, - .exit = phy_meson_gxl_usb3_exit, - .owner = THIS_MODULE, -}; - -static int phy_meson_gxl_usb3_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct phy_meson_gxl_usb3_priv *priv; - struct resource *res; - struct phy *phy; - struct phy_provider *phy_provider; - void __iomem *base; - int ret; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - priv->regmap = devm_regmap_init_mmio(dev, base, - &phy_meson_gxl_usb3_regmap_conf); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); - - priv->clk_phy = devm_clk_get(dev, "phy"); - if (IS_ERR(priv->clk_phy)) - return PTR_ERR(priv->clk_phy); - - priv->clk_peripheral = devm_clk_get(dev, "peripheral"); - if (IS_ERR(priv->clk_peripheral)) - return PTR_ERR(priv->clk_peripheral); - - priv->reset = devm_reset_control_array_get_shared(dev); - if (IS_ERR(priv->reset)) - return PTR_ERR(priv->reset); - - /* - * default to host mode as hardware defaults and/or boot-loader - * behavior can result in this PHY starting up in device mode. this - * default and the initialization in phy_meson_gxl_usb3_init ensure - * that we reproducibly start in a known mode on all devices. - */ - priv->mode = PHY_MODE_USB_HOST; - - phy = devm_phy_create(dev, np, &phy_meson_gxl_usb3_ops); - if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - - return ret; - } - - phy_set_drvdata(phy, priv); - - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - - return PTR_ERR_OR_ZERO(phy_provider); -} - -static const struct of_device_id phy_meson_gxl_usb3_of_match[] = { - { .compatible = "amlogic,meson-gxl-usb3-phy", }, - { }, -}; -MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb3_of_match); - -static struct platform_driver phy_meson_gxl_usb3_driver = { - .probe = phy_meson_gxl_usb3_probe, - .driver = { - .name = "phy-meson-gxl-usb3", - .of_match_table = phy_meson_gxl_usb3_of_match, - }, -}; -module_platform_driver(phy_meson_gxl_usb3_driver); - -MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); -MODULE_DESCRIPTION("Meson GXL USB3 PHY and OTG detection driver"); -MODULE_LICENSE("GPL v2"); |