diff options
| author | Justin Chen <justin.chen@broadcom.com> | 2023-06-15 13:06:16 -0700 |
|---|---|---|
| committer | Vinod Koul <vkoul@kernel.org> | 2023-06-21 17:43:27 +0530 |
| commit | 5095d045a96235687199015ca94a03c00d68234f (patch) | |
| tree | ab10e67707dc28b7655bd731ac180fe98e2051a8 /drivers/phy/broadcom | |
| parent | c0c2fcb1325d0d4f3b322b5ee49385f8eca2560d (diff) | |
| download | linux-5095d045a96235687199015ca94a03c00d68234f.tar.gz linux-5095d045a96235687199015ca94a03c00d68234f.tar.bz2 linux-5095d045a96235687199015ca94a03c00d68234f.zip | |
phy: usb: Turn off phy when port is in suspend
The COMMONONN bit turns off the PHY when the host controller puts it
into suspend state. This can happen during the following...
- Nothing is connected to the port
- The host controller goes into low power mode whatever due to auto
suspend or system suspend.
With COMMONONN we also must unset U2_FREECLK_EXISTS since the UTMI
clock is fed by the PHY.
With these changes we see a power savings of ~12mW when port is in
suspend.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/1686859578-45242-2-git-send-email-justin.chen@broadcom.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/phy/broadcom')
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 15 | ||||
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init.h | 8 |
2 files changed, 21 insertions, 2 deletions
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c index 76cf4280d7ed..4c10cafded4e 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -59,6 +59,8 @@ #define USB_CTLR_TP_DIAG1_wake_MASK BIT(1) #define USB_CTRL_CTLR_CSHCR 0x50 #define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK BIT(18) +#define USB_CTRL_P0_U2PHY_CFG1 0x68 +#define USB_CTRL_P0_U2PHY_CFG1_COMMONONN_MASK BIT(10) /* Register definitions for the USB_PHY block in 7211b0 */ #define USB_PHY_PLL_CTL 0x00 @@ -90,6 +92,8 @@ #define BDC_EC_AXIRDA_RTS_MASK GENMASK(31, 28) #define BDC_EC_AXIRDA_RTS_SHIFT 28 +#define USB_XHCI_GBL_GUSB2PHYCFG 0x100 +#define USB_XHCI_GBL_GUSB2PHYCFG_U2_FREECLK_EXISTS_MASK BIT(30) static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, uint8_t addr, uint16_t data) @@ -140,13 +144,17 @@ static void xhci_soft_reset(struct brcm_usb_init_params *params, int on_off) { void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *xhci_gbl = params->regs[BRCM_REGS_XHCI_GBL]; /* Assert reset */ - if (on_off) + if (on_off) { USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB); /* De-assert reset */ - else + } else { USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB); + /* Required for COMMONONN to be set */ + USB_XHCI_GBL_UNSET(xhci_gbl, GUSB2PHYCFG, U2_FREECLK_EXISTS); + } } static void usb_init_ipp(struct brcm_usb_init_params *params) @@ -320,6 +328,9 @@ static void usb_init_common_7216(struct brcm_usb_init_params *params) /* 1 millisecond - for USB clocks to settle down */ usleep_range(1000, 2000); + /* Disable PHY when port is suspended */ + USB_CTRL_SET(ctrl, P0_U2PHY_CFG1, COMMONONN); + usb_wake_enable_7216(params, false); usb_init_common(params); } diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h index f9fbf8fb80e5..c1a88f5cd4cd 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.h +++ b/drivers/phy/broadcom/phy-brcm-usb-init.h @@ -34,6 +34,14 @@ enum brcmusb_reg_sel { brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \ USB_CTRL_##reg##_##field##_MASK) +#define USB_XHCI_GBL_REG(base, reg) ((void __iomem *)base + USB_XHCI_GBL_##reg) +#define USB_XHCI_GBL_SET(base, reg, field) \ + brcm_usb_ctrl_set(USB_XHCI_GBL_REG(base, reg), \ + USB_XHCI_GBL_##reg##_##field##_MASK) +#define USB_XHCI_GBL_UNSET(base, reg, field) \ + brcm_usb_ctrl_unset(USB_XHCI_GBL_REG(base, reg), \ + USB_XHCI_GBL_##reg##_##field##_MASK) + struct brcm_usb_init_params; struct brcm_usb_init_ops { |