Merge tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A fairly quiet release again, a couple of relatively small new
  features and a bunch of driver specific work including yet more code
  elimination and fixes from Axel Lin.

   - Addidion of linear_min_sel for offsetting linear selectors in the
     helpers.
   - Support for continuous voltage ranges for regulators with extremely
     high resolution.
   - Drivers for AS3711, DA9055, MAX9873, TPS51632, TPS80031 and ARM
     vexpress."

Fix up trivial conflict (due to typo fix) in palmas-regulator.c

* tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (80 commits)
  regulator: core: Fix logic to determinate if regulator can change voltage
  regulator: s5m8767: Fix to work even if no DVS gpio present
  regulator: s5m8767: Fix to read the first DVS register.
  regulator: s5m8767: Fix to work when platform registers less regulators
  regulator: gpio-regulator: gpio_set_value should use cansleep
  regulator: gpio-regulator: Fix logical error in for() loop
  regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap
  regulator: anatop: Use linear_min_sel with linear mapping
  regulator: max1586: Implement get_voltage_sel callback
  regulator: lp8788-buck: Kill _gpio_request function
  regulator: tps80031: Convert tps80031_ldo_ops to linear_min_sel and list_voltage_linear
  regulator: lp8788-ldo: Remove val array in lp8788_config_ldo_enable_mode
  regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_match
  regulator: palmas: Convert palmas_ops_smps to regulator_[get|set]_voltage_sel_regmap
  regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel
  regulators: add regulator_can_change_voltage() function
  regulator: tps51632: Ensure [base|max]_voltage_uV pdata settings are valid
  regulator: wm831x-dcdc: Add MODULE_ALIAS for wm831x-boostp
  regulator: wm831x-dcdc: Ensure selected voltage falls within requested range
  regulator: tps51632: Use linear_min_sel and regulator_[map|list]_voltage_linear
  ...

1 files changed, 12 insertions, 22 deletions

diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 1af97686f444..0199eeea63b1 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -48,36 +48,21 @@ static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg,
 					unsigned selector)
 {
 	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
-	u32 val, mask;
 
 	if (!anatop_reg->control_reg)
 		return -ENOTSUPP;
 
-	val = anatop_reg->min_bit_val + selector;
-	dev_dbg(&reg->dev, "%s: calculated val %d\n", __func__, val);
-	mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
-		anatop_reg->vol_bit_shift;
-	val <<= anatop_reg->vol_bit_shift;
-	regmap_update_bits(anatop_reg->anatop, anatop_reg->control_reg,
-				mask, val);
-
-	return 0;
+	return regulator_set_voltage_sel_regmap(reg, selector);
 }
 
 static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
 {
 	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
-	u32 val, mask;
 
 	if (!anatop_reg->control_reg)
 		return -ENOTSUPP;
 
-	regmap_read(anatop_reg->anatop, anatop_reg->control_reg, &val);
-	mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
-		anatop_reg->vol_bit_shift;
-	val = (val & mask) >> anatop_reg->vol_bit_shift;
-
-	return val - anatop_reg->min_bit_val;
+	return regulator_get_voltage_sel_regmap(reg);
 }
 
 static struct regulator_ops anatop_rops = {
@@ -87,7 +72,7 @@ static struct regulator_ops anatop_rops = {
 	.map_voltage = regulator_map_voltage_linear,
 };
 
-static int __devinit anatop_regulator_probe(struct platform_device *pdev)
+static int anatop_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
@@ -158,15 +143,20 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
 		goto anatop_probe_end;
 	}
 
-	rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
-		/ 25000 + 1;
+	rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1
+			    + sreg->min_bit_val;
 	rdesc->min_uV = sreg->min_voltage;
 	rdesc->uV_step = 25000;
+	rdesc->linear_min_sel = sreg->min_bit_val;
+	rdesc->vsel_reg = sreg->control_reg;
+	rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
+			   sreg->vol_bit_shift;
 
 	config.dev = &pdev->dev;
 	config.init_data = initdata;
 	config.driver_data = sreg;
 	config.of_node = pdev->dev.of_node;
+	config.regmap = sreg->anatop;
 
 	/* register regulator */
 	rdev = regulator_register(rdesc, &config);
@@ -186,7 +176,7 @@ anatop_probe_end:
 	return ret;
 }
 
-static int __devexit anatop_regulator_remove(struct platform_device *pdev)
+static int anatop_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 	struct anatop_regulator *sreg = rdev_get_drvdata(rdev);
@@ -210,7 +200,7 @@ static struct platform_driver anatop_regulator_driver = {
 		.of_match_table = of_anatop_regulator_match_tbl,
 	},
 	.probe	= anatop_regulator_probe,
-	.remove	= __devexit_p(anatop_regulator_remove),
+	.remove	= anatop_regulator_remove,
 };
 
 static int __init anatop_regulator_init(void)