summaryrefslogtreecommitdiffstats
path: root/drivers/remoteproc/remoteproc_core.c
diff options
context:
space:
mode:
authorOhad Ben-Cohen <ohad@wizery.com>2012-02-13 22:30:39 +0100
committerOhad Ben-Cohen <ohad@wizery.com>2012-03-06 19:14:12 +0200
commit7a186941626d19f668b08108db158379b32e6e02 (patch)
treed478210fa3ae45ef8b3eaf6a6432eadc49cbb55a /drivers/remoteproc/remoteproc_core.c
parent41a6ee09ee8dd7ac3a6ac12a24e26279b5d93385 (diff)
downloadlinux-7a186941626d19f668b08108db158379b32e6e02.tar.gz
linux-7a186941626d19f668b08108db158379b32e6e02.tar.bz2
linux-7a186941626d19f668b08108db158379b32e6e02.zip
remoteproc: remove the single rpmsg vdev limitation
Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers/remoteproc/remoteproc_core.c')
-rw-r--r--drivers/remoteproc/remoteproc_core.c292
1 files changed, 150 insertions, 142 deletions
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 10348451c6c9..ca02f128b435 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -52,8 +52,8 @@ static void klist_rproc_put(struct klist_node *n);
* We need this in order to support name-based lookups (needed by the
* rproc_get_by_name()).
*
- * That said, we don't use rproc_get_by_name() anymore within the rpmsg
- * framework. The use cases that do require its existence should be
+ * That said, we don't use rproc_get_by_name() at this point.
+ * The use cases that do require its existence should be
* scrutinized, and hopefully migrated to rproc_boot() using device-based
* binding.
*
@@ -279,80 +279,112 @@ rproc_load_segments(struct rproc *rproc, const u8 *elf_data, size_t len)
return ret;
}
-/**
- * rproc_handle_early_vdev() - early handle a virtio header resource
- * @rproc: the remote processor
- * @rsc: the resource descriptor
- * @avail: size of available data (for sanity checking the image)
- *
- * The existence of this virtio hdr resource entry means that the firmware
- * of this @rproc supports this virtio device.
- *
- * Currently we support only a single virtio device of type VIRTIO_ID_RPMSG,
- * but the plan is to remove this limitation and support any number
- * of virtio devices (and of any type). We'll also add support for dynamically
- * adding (and removing) virtio devices over the rpmsg bus, but simple
- * firmwares that doesn't want to get involved with rpmsg will be able
- * to simply use the resource table for this.
- *
- * Returns 0 on success, or an appropriate error code otherwise
- */
-static int rproc_handle_early_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
- int avail)
+static int
+__rproc_handle_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i)
{
- struct rproc_vdev *rvdev;
+ struct rproc *rproc = rvdev->rproc;
+ struct device *dev = rproc->dev;
+ struct fw_rsc_vdev_vring *vring = &rsc->vring[i];
+ dma_addr_t dma;
+ void *va;
+ int ret, size, notifyid;
- /* make sure resource isn't truncated */
- if (sizeof(*rsc) > avail) {
- dev_err(rproc->dev, "vdev rsc is truncated\n");
+ dev_dbg(dev, "vdev rsc: vring%d: da %x, qsz %d, align %d\n",
+ i, vring->da, vring->num, vring->align);
+
+ /* make sure reserved bytes are zeroes */
+ if (vring->reserved) {
+ dev_err(dev, "vring rsc has non zero reserved bytes\n");
return -EINVAL;
}
- /* we only support VIRTIO_ID_RPMSG devices for now */
- if (rsc->id != VIRTIO_ID_RPMSG) {
- dev_warn(rproc->dev, "unsupported vdev: %d\n", rsc->id);
+ /* the firmware must provide the expected queue size */
+ if (!vring->num) {
+ dev_err(dev, "invalid qsz (%d)\n", vring->num);
return -EINVAL;
}
- /* we only support a single vdev per rproc for now */
- if (rproc->rvdev) {
- dev_warn(rproc->dev, "redundant vdev entry\n");
+ /* actual size of vring (in bytes) */
+ size = PAGE_ALIGN(vring_size(vring->num, AMP_VRING_ALIGN));
+
+ if (!idr_pre_get(&rproc->notifyids, GFP_KERNEL)) {
+ dev_err(dev, "idr_pre_get failed\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Allocate non-cacheable memory for the vring. In the future
+ * this call will also configure the IOMMU for us
+ */
+ va = dma_alloc_coherent(dev, size, &dma, GFP_KERNEL);
+ if (!va) {
+ dev_err(dev, "dma_alloc_coherent failed\n");
return -EINVAL;
}
- rvdev = kzalloc(sizeof(struct rproc_vdev), GFP_KERNEL);
- if (!rvdev)
- return -ENOMEM;
+ /* assign an rproc-wide unique index for this vring */
+ /* TODO: assign a notifyid for rvdev updates as well */
+ ret = idr_get_new(&rproc->notifyids, &rvdev->vring[i], &notifyid);
+ if (ret) {
+ dev_err(dev, "idr_get_new failed: %d\n", ret);
+ dma_free_coherent(dev, size, va, dma);
+ return ret;
+ }
- /* remember the device features */
- rvdev->dfeatures = rsc->dfeatures;
+ /* let the rproc know the da and notifyid of this vring */
+ /* TODO: expose this to remote processor */
+ vring->da = dma;
+ vring->notifyid = notifyid;
- rproc->rvdev = rvdev;
- rvdev->rproc = rproc;
+ dev_dbg(dev, "vring%d: va %p dma %x size %x idr %d\n", i, va,
+ dma, size, notifyid);
+
+ rvdev->vring[i].len = vring->num;
+ rvdev->vring[i].va = va;
+ rvdev->vring[i].dma = dma;
+ rvdev->vring[i].notifyid = notifyid;
+ rvdev->vring[i].rvdev = rvdev;
return 0;
}
+static void __rproc_free_vrings(struct rproc_vdev *rvdev, int i)
+{
+ struct rproc *rproc = rvdev->rproc;
+
+ for (i--; i > 0; i--) {
+ struct rproc_vring *rvring = &rvdev->vring[i];
+ int size = PAGE_ALIGN(vring_size(rvring->len, AMP_VRING_ALIGN));
+
+ dma_free_coherent(rproc->dev, size, rvring->va, rvring->dma);
+ idr_remove(&rproc->notifyids, rvring->notifyid);
+ }
+}
+
/**
* rproc_handle_vdev() - handle a vdev fw resource
* @rproc: the remote processor
* @rsc: the vring resource descriptor
* @avail: size of available data (for sanity checking the image)
*
- * This resource entry requires allocation of non-cacheable memory
- * for a virtio vring. Currently we only support two vrings per remote
- * processor, required for the virtio rpmsg device.
- *
- * The 'len' member of @rsc should contain the number of buffers this vring
- * support and 'da' should either contain the device address where
- * the remote processor is expecting the vring, or indicate that
- * dynamically allocation of the vring's device address is supported.
- *
- * Note: 'da' is currently not handled. This will be revised when the generic
- * iommu-based DMA API will arrive, or a dynanic & non-iommu use case show
- * up. Meanwhile, statically-addressed iommu-based images should use
- * RSC_DEVMEM resource entries to map their require 'da' to the physical
- * address of their base CMA region.
+ * This resource entry requests the host to statically register a virtio
+ * device (vdev), and setup everything needed to support it. It contains
+ * everything needed to make it possible: the virtio device id, virtio
+ * device features, vrings information, virtio config space, etc...
+ *
+ * Before registering the vdev, the vrings are allocated from non-cacheable
+ * physically contiguous memory. Currently we only support two vrings per
+ * remote processor (temporary limitation). We might also want to consider
+ * doing the vring allocation only later when ->find_vqs() is invoked, and
+ * then release them upon ->del_vqs().
+ *
+ * Note: @da is currently not really handled correctly: we dynamically
+ * allocate it using the DMA API, ignoring requested hard coded addresses,
+ * and we don't take care of any required IOMMU programming. This is all
+ * going to be taken care of when the generic iommu-based DMA API will be
+ * merged. Meanwhile, statically-addressed iommu-based firmware images should
+ * use RSC_DEVMEM resource entries to map their required @da to the physical
+ * address of their base CMA region (ouch, hacky!).
*
* Returns 0 on success, or an appropriate error code otherwise
*/
@@ -360,8 +392,8 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
int avail)
{
struct device *dev = rproc->dev;
- struct rproc_vdev *rvdev = rproc->rvdev;
- int i;
+ struct rproc_vdev *rvdev;
+ int i, ret;
/* make sure resource isn't truncated */
if (sizeof(*rsc) + rsc->num_of_vrings * sizeof(struct fw_rsc_vdev_vring)
@@ -379,61 +411,41 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
dev_dbg(dev, "vdev rsc: id %d, dfeatures %x, cfg len %d, %d vrings\n",
rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings);
- /* no vdev is in place ? */
- if (!rvdev) {
- dev_err(dev, "vring requested without a virtio dev entry\n");
- return -EINVAL;
- }
-
- /* we currently support two vrings per rproc (for rx and tx) */
- if (rsc->num_of_vrings != ARRAY_SIZE(rvdev->vring)) {
+ /* we currently support only two vrings per rvdev */
+ if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) {
dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings);
return -EINVAL;
}
- /* initialize the vrings */
- for (i = 0; i < rsc->num_of_vrings; i++) {
- struct fw_rsc_vdev_vring *vring = &rsc->vring[i];
- dma_addr_t dma;
- int size;
- void *va;
-
- /* make sure reserved bytes are zeroes */
- if (vring->reserved) {
- dev_err(dev, "vring rsc has non zero reserved bytes\n");
- return -EINVAL;
- }
+ rvdev = kzalloc(sizeof(struct rproc_vdev), GFP_KERNEL);
+ if (!rvdev)
+ return -ENOMEM;
- /* the firmware must provide the expected queue size */
- if (!vring->num) {
- dev_err(dev, "missing expected queue size\n");
- /* potential cleanups are taken care of later on */
- return -EINVAL;
- }
+ rvdev->rproc = rproc;
- /* actual size of vring (in bytes) */
- size = PAGE_ALIGN(vring_size(vring->num, AMP_VRING_ALIGN));
+ /* allocate the vrings */
+ for (i = 0; i < rsc->num_of_vrings; i++) {
+ ret = __rproc_handle_vring(rvdev, rsc, i);
+ if (ret)
+ goto free_vrings;
+ }
- /*
- * Allocate non-cacheable memory for the vring. In the future
- * this call will also configure the IOMMU for us
- */
- va = dma_alloc_coherent(dev, size, &dma, GFP_KERNEL);
- if (!va) {
- dev_err(dev, "dma_alloc_coherent failed\n");
- /* potential cleanups are taken care of later on */
- return -EINVAL;
- }
+ /* remember the device features */
+ rvdev->dfeatures = rsc->dfeatures;
- dev_dbg(dev, "vring%d: va %p dma %x qsz %d ring size %x\n", i,
- va, dma, vring->num, size);
+ list_add_tail(&rvdev->node, &rproc->rvdevs);
- rvdev->vring[i].len = vring->num;
- rvdev->vring[i].va = va;
- rvdev->vring[i].dma = dma;
- }
+ /* it is now safe to add the virtio device */
+ ret = rproc_add_virtio_dev(rvdev, rsc->id);
+ if (ret)
+ goto free_vrings;
return 0;
+
+free_vrings:
+ __rproc_free_vrings(rvdev, i);
+ kfree(rvdev);
+ return ret;
}
/**
@@ -731,7 +743,7 @@ static rproc_handle_resource_t rproc_handle_rsc[] = {
[RSC_CARVEOUT] = (rproc_handle_resource_t)rproc_handle_carveout,
[RSC_DEVMEM] = (rproc_handle_resource_t)rproc_handle_devmem,
[RSC_TRACE] = (rproc_handle_resource_t)rproc_handle_trace,
- [RSC_VDEV] = (rproc_handle_resource_t)rproc_handle_vdev,
+ [RSC_VDEV] = NULL, /* VDEVs were handled upon registrarion */
};
/* handle firmware resource entries before booting the remote processor */
@@ -784,6 +796,7 @@ rproc_handle_virtio_rsc(struct rproc *rproc, struct resource_table *table, int l
int offset = table->offset[i];
struct fw_rsc_hdr *hdr = (void *)table + offset;
int avail = len - offset - sizeof(*hdr);
+ struct fw_rsc_vdev *vrsc;
/* make sure table isn't truncated */
if (avail < 0) {
@@ -793,12 +806,14 @@ rproc_handle_virtio_rsc(struct rproc *rproc, struct resource_table *table, int l
dev_dbg(dev, "%s: rsc type %d\n", __func__, hdr->type);
- if (hdr->type == RSC_VDEV) {
- struct fw_rsc_vdev *vrsc =
- (struct fw_rsc_vdev *)hdr->data;
- ret = rproc_handle_early_vdev(rproc, vrsc, avail);
+ if (hdr->type != RSC_VDEV)
+ continue;
+
+ vrsc = (struct fw_rsc_vdev *)hdr->data;
+
+ ret = rproc_handle_vdev(rproc, vrsc, avail);
+ if (ret)
break;
- }
}
return ret;
@@ -889,14 +904,12 @@ static int rproc_handle_resources(struct rproc *rproc, const u8 *elf_data,
* @rproc: rproc handle
*
* This function will free all resources acquired for @rproc, and it
- * is called when @rproc shuts down, or just failed booting.
+ * is called whenever @rproc either shuts down or fails to boot.
*/
static void rproc_resource_cleanup(struct rproc *rproc)
{
struct rproc_mem_entry *entry, *tmp;
struct device *dev = rproc->dev;
- struct rproc_vdev *rvdev = rproc->rvdev;
- int i;
/* clean up debugfs trace entries */
list_for_each_entry_safe(entry, tmp, &rproc->traces, node) {
@@ -906,23 +919,6 @@ static void rproc_resource_cleanup(struct rproc *rproc)
kfree(entry);
}
- /* free the coherent memory allocated for the vrings */
- for (i = 0; rvdev && i < ARRAY_SIZE(rvdev->vring); i++) {
- int qsz = rvdev->vring[i].len;
- void *va = rvdev->vring[i].va;
- int dma = rvdev->vring[i].dma;
-
- /* virtqueue size is expressed in number of buffers supported */
- if (qsz) {
- /* how many bytes does this vring really occupy ? */
- int size = PAGE_ALIGN(vring_size(qsz, AMP_VRING_ALIGN));
-
- dma_free_coherent(rproc->dev, size, va, dma);
-
- rvdev->vring[i].len = 0;
- }
- }
-
/* clean up carveout allocations */
list_for_each_entry_safe(entry, tmp, &rproc->carveouts, node) {
dma_free_coherent(dev, entry->len, entry->va, entry->dma);
@@ -1100,11 +1096,6 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
goto out;
}
- /* add the virtio device (currently only rpmsg vdevs are supported) */
- ret = rproc_add_rpmsg_vdev(rproc);
- if (ret)
- goto out;
-
out:
if (fw)
release_firmware(fw);
@@ -1266,13 +1257,23 @@ EXPORT_SYMBOL(rproc_shutdown);
void rproc_release(struct kref *kref)
{
struct rproc *rproc = container_of(kref, struct rproc, refcount);
+ struct rproc_vdev *rvdev, *rvtmp;
dev_info(rproc->dev, "removing %s\n", rproc->name);
rproc_delete_debug_dir(rproc);
- /* at this point no one holds a reference to rproc anymore */
- kfree(rproc);
+ /* clean up remote vdev entries */
+ list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) {
+ __rproc_free_vrings(rvdev, RVDEV_NUM_VRINGS);
+ list_del(&rvdev->node);
+ }
+
+ /*
+ * At this point no one holds a reference to rproc anymore,
+ * so we can directly unroll rproc_alloc()
+ */
+ rproc_free(rproc);
}
/* will be called when an rproc is added to the rprocs klist */
@@ -1316,7 +1317,7 @@ static struct rproc *next_rproc(struct klist_iter *i)
* use rproc_put() to decrement it back once rproc isn't needed anymore.
*
* Note: currently this function (and its counterpart rproc_put()) are not
- * used anymore by the rpmsg subsystem. We need to scrutinize the use cases
+ * being used. We need to scrutinize the use cases
* that still need them, and see if we can migrate them to use the non
* name-based boot/shutdown interface.
*/
@@ -1391,11 +1392,8 @@ EXPORT_SYMBOL(rproc_put);
* firmware.
*
* If found, those virtio devices will be created and added, so as a result
- * of registering this remote processor, additional virtio drivers will be
+ * of registering this remote processor, additional virtio drivers might be
* probed.
- *
- * Currently, though, we only support a single RPMSG virtio vdev per remote
- * processor.
*/
int rproc_register(struct rproc *rproc)
{
@@ -1418,7 +1416,7 @@ int rproc_register(struct rproc *rproc)
/*
* We must retrieve early virtio configuration info from
- * the firmware (e.g. whether to register a virtio rpmsg device,
+ * the firmware (e.g. whether to register a virtio device,
* what virtio features does it support, ...).
*
* We're initiating an asynchronous firmware loading, so we can
@@ -1487,9 +1485,12 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
mutex_init(&rproc->lock);
+ idr_init(&rproc->notifyids);
+
INIT_LIST_HEAD(&rproc->carveouts);
INIT_LIST_HEAD(&rproc->mappings);
INIT_LIST_HEAD(&rproc->traces);
+ INIT_LIST_HEAD(&rproc->rvdevs);
rproc->state = RPROC_OFFLINE;
@@ -1509,6 +1510,9 @@ EXPORT_SYMBOL(rproc_alloc);
*/
void rproc_free(struct rproc *rproc)
{
+ idr_remove_all(&rproc->notifyids);
+ idr_destroy(&rproc->notifyids);
+
kfree(rproc);
}
EXPORT_SYMBOL(rproc_free);
@@ -1535,18 +1539,22 @@ EXPORT_SYMBOL(rproc_free);
*/
int rproc_unregister(struct rproc *rproc)
{
+ struct rproc_vdev *rvdev;
+
if (!rproc)
return -EINVAL;
/* if rproc is just being registered, wait */
wait_for_completion(&rproc->firmware_loading_complete);
- /* was an rpmsg vdev created ? */
- if (rproc->rvdev)
- rproc_remove_rpmsg_vdev(rproc);
+ /* clean up remote vdev entries */
+ list_for_each_entry(rvdev, &rproc->rvdevs, node)
+ rproc_remove_virtio_dev(rvdev);
- klist_remove(&rproc->node);
+ /* the rproc is downref'ed as soon as it's removed from the klist */
+ klist_del(&rproc->node);
+ /* the rproc will only be released after its refcount drops to zero */
kref_put(&rproc->refcount, rproc_release);
return 0;