diff options
author | James Smart <jsmart2021@gmail.com> | 2019-10-18 14:18:30 -0700 |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2019-10-24 21:02:06 -0400 |
commit | 83c6cb1ae8be6948b5fa43b2450a176dba80688b (patch) | |
tree | d2f126c2a1207af94ff078953b429fcb24f5d1c2 /drivers/scsi/lpfc/lpfc_init.c | |
parent | e7d8595272553c27846946601b72e4c581f9712a (diff) | |
download | linux-83c6cb1ae8be6948b5fa43b2450a176dba80688b.tar.gz linux-83c6cb1ae8be6948b5fa43b2450a176dba80688b.tar.bz2 linux-83c6cb1ae8be6948b5fa43b2450a176dba80688b.zip |
scsi: lpfc: Add FC-AL support to lpe32000 models
In the past, the lpe32000 models, based their main support being for 32G,
and as FC-AL is not supported in the FC standards past 8G, did not support
FC-AL operation.
This patch adds private-loop FC-AL support for the LPE32000 adapters
when a link is 8G or below. To avoid conditions where link rate may
change, which would cause non-connectivity to the AL device, FC-AL
mode must become a persistent setting and the link kept at a speed
supporting FC-AL.
The patch:
- Adds a pls attribute indicating whether the adapter properly supports
FC-AL.
- Adds support for the adapter to indicate that topology should be fixed
and the topology types to be configured.
- Adds a pt attribute to report the persistent topology if present.
Link: https://lore.kernel.org/r/20191018211832.7917-15-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d821adbb0047..686677dd52a4 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -8239,6 +8239,94 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx)); } +static const char * const lpfc_topo_to_str[] = { + "Loop then P2P", + "Loopback", + "P2P Only", + "Unsupported", + "Loop Only", + "Unsupported", + "P2P then Loop", +}; + +/** + * lpfc_map_topology - Map the topology read from READ_CONFIG + * @phba: pointer to lpfc hba data structure. + * @rdconf: pointer to read config data + * + * This routine is invoked to map the topology values as read + * from the read config mailbox command. If the persistent + * topology feature is supported, the firmware will provide the + * saved topology information to be used in INIT_LINK + * + **/ +#define LINK_FLAGS_DEF 0x0 +#define LINK_FLAGS_P2P 0x1 +#define LINK_FLAGS_LOOP 0x2 +static void +lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config) +{ + u8 ptv, tf, pt; + + ptv = bf_get(lpfc_mbx_rd_conf_ptv, rd_config); + tf = bf_get(lpfc_mbx_rd_conf_tf, rd_config); + pt = bf_get(lpfc_mbx_rd_conf_pt, rd_config); + + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "2027 Read Config Data : ptv:0x%x, tf:0x%x pt:0x%x", + ptv, tf, pt); + if (!ptv) { + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + "2019 FW does not support persistent topology " + "Using driver parameter defined value [%s]", + lpfc_topo_to_str[phba->cfg_topology]); + return; + } + /* FW supports persistent topology - override module parameter value */ + phba->hba_flag |= HBA_PERSISTENT_TOPO; + switch (phba->pcidev->device) { + case PCI_DEVICE_ID_LANCER_G7_FC: + if (tf || (pt == LINK_FLAGS_LOOP)) { + /* Invalid values from FW - use driver params */ + phba->hba_flag &= ~HBA_PERSISTENT_TOPO; + } else { + /* Prism only supports PT2PT topology */ + phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT; + } + break; + case PCI_DEVICE_ID_LANCER_G6_FC: + if (!tf) { + phba->cfg_topology = ((pt == LINK_FLAGS_LOOP) + ? FLAGS_TOPOLOGY_MODE_LOOP + : FLAGS_TOPOLOGY_MODE_PT_PT); + } else { + phba->hba_flag &= ~HBA_PERSISTENT_TOPO; + } + break; + default: /* G5 */ + if (tf) { + /* If topology failover set - pt is '0' or '1' */ + phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP : + FLAGS_TOPOLOGY_MODE_LOOP_PT); + } else { + phba->cfg_topology = ((pt == LINK_FLAGS_P2P) + ? FLAGS_TOPOLOGY_MODE_PT_PT + : FLAGS_TOPOLOGY_MODE_LOOP); + } + break; + } + if (phba->hba_flag & HBA_PERSISTENT_TOPO) { + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "2020 Using persistent topology value [%s]", + lpfc_topo_to_str[phba->cfg_topology]); + } else { + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + "2021 Invalid topology values from FW " + "Using driver parameter defined value [%s]", + lpfc_topo_to_str[phba->cfg_topology]); + } +} + /** * lpfc_sli4_read_config - Get the config parameters. * @phba: pointer to lpfc hba data structure. @@ -8350,6 +8438,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ? (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0; phba->max_vports = phba->max_vpi; + lpfc_map_topology(phba, rd_config); lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "2003 cfg params Extents? %d " "XRI(B:%d M:%d), " @@ -11542,6 +11631,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) sli4_params->cqav = bf_get(cfg_cqav, mbx_sli4_parameters); sli4_params->wqsize = bf_get(cfg_wqsize, mbx_sli4_parameters); sli4_params->bv1s = bf_get(cfg_bv1s, mbx_sli4_parameters); + sli4_params->pls = bf_get(cfg_pvl, mbx_sli4_parameters); sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt, mbx_sli4_parameters); sli4_params->wqpcnt = bf_get(cfg_wqpcnt, mbx_sli4_parameters); |