Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...

1 files changed, 91 insertions, 10 deletions

diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index fe9a785b7b6f..ca724fe91b8d 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -21,8 +21,8 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"07.707.51.00-rc1"
-#define MEGASAS_RELDATE				"February 7, 2019"
+#define MEGASAS_VERSION				"07.710.06.00-rc1"
+#define MEGASAS_RELDATE				"June 18, 2019"
 
 /*
  * Device IDs
@@ -52,6 +52,10 @@
 #define PCI_DEVICE_ID_LSI_AERO_10E2		0x10e2
 #define PCI_DEVICE_ID_LSI_AERO_10E5		0x10e5
 #define PCI_DEVICE_ID_LSI_AERO_10E6		0x10e6
+#define PCI_DEVICE_ID_LSI_AERO_10E0		0x10e0
+#define PCI_DEVICE_ID_LSI_AERO_10E3		0x10e3
+#define PCI_DEVICE_ID_LSI_AERO_10E4		0x10e4
+#define PCI_DEVICE_ID_LSI_AERO_10E7		0x10e7
 
 /*
  * Intel HBA SSDIDs
@@ -123,6 +127,8 @@
 #define MFI_RESET_ADAPTER			0x00000002
 #define MEGAMFI_FRAME_SIZE			64
 
+#define MFI_STATE_FAULT_CODE			0x0FFF0000
+#define MFI_STATE_FAULT_SUBCODE			0x0000FF00
 /*
  * During FW init, clear pending cmds & reset state using inbound_msg_0
  *
@@ -190,6 +196,7 @@ enum MFI_CMD_OP {
 	MFI_CMD_SMP		= 0x7,
 	MFI_CMD_STP		= 0x8,
 	MFI_CMD_NVME		= 0x9,
+	MFI_CMD_TOOLBOX		= 0xa,
 	MFI_CMD_OP_COUNT,
 	MFI_CMD_INVALID		= 0xff
 };
@@ -1449,7 +1456,39 @@ struct megasas_ctrl_info {
 
 	u8 reserved6[64];
 
-	u32 rsvdForAdptOp[64];
+	struct {
+	#if defined(__BIG_ENDIAN_BITFIELD)
+		u32 reserved:19;
+		u32 support_pci_lane_margining: 1;
+		u32 support_psoc_update:1;
+		u32 support_force_personality_change:1;
+		u32 support_fde_type_mix:1;
+		u32 support_snap_dump:1;
+		u32 support_nvme_tm:1;
+		u32 support_oce_only:1;
+		u32 support_ext_mfg_vpd:1;
+		u32 support_pcie:1;
+		u32 support_cvhealth_info:1;
+		u32 support_profile_change:2;
+		u32 mr_config_ext2_supported:1;
+	#else
+		u32 mr_config_ext2_supported:1;
+		u32 support_profile_change:2;
+		u32 support_cvhealth_info:1;
+		u32 support_pcie:1;
+		u32 support_ext_mfg_vpd:1;
+		u32 support_oce_only:1;
+		u32 support_nvme_tm:1;
+		u32 support_snap_dump:1;
+		u32 support_fde_type_mix:1;
+		u32 support_force_personality_change:1;
+		u32 support_psoc_update:1;
+		u32 support_pci_lane_margining: 1;
+		u32 reserved:19;
+	#endif
+	} adapter_operations5;
+
+	u32 rsvdForAdptOp[63];
 
 	u8 reserved7[3];
 
@@ -1483,7 +1522,9 @@ struct megasas_ctrl_info {
 #define MEGASAS_FW_BUSY				1
 
 /* Driver's internal Logging levels*/
-#define OCR_LOGS    (1 << 0)
+#define OCR_DEBUG    (1 << 0)
+#define TM_DEBUG     (1 << 1)
+#define LD_PD_DEBUG    (1 << 2)
 
 #define SCAN_PD_CHANNEL	0x1
 #define SCAN_VD_CHANNEL	0x2
@@ -1559,6 +1600,7 @@ enum FW_BOOT_CONTEXT {
 #define MFI_IO_TIMEOUT_SECS			180
 #define MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF	(5 * HZ)
 #define MEGASAS_OCR_SETTLE_TIME_VF		(1000 * 30)
+#define MEGASAS_SRIOV_MAX_RESET_TRIES_VF	1
 #define MEGASAS_ROUTINE_WAIT_TIME_VF		300
 #define MFI_REPLY_1078_MESSAGE_INTERRUPT	0x80000000
 #define MFI_REPLY_GEN2_MESSAGE_INTERRUPT	0x00000001
@@ -1583,7 +1625,10 @@ enum FW_BOOT_CONTEXT {
 
 #define MR_CAN_HANDLE_SYNC_CACHE_OFFSET		0X01000000
 
+#define MR_ATOMIC_DESCRIPTOR_SUPPORT_OFFSET	(1 << 24)
+
 #define MR_CAN_HANDLE_64_BIT_DMA_OFFSET		(1 << 25)
+#define MR_INTR_COALESCING_SUPPORT_OFFSET	(1 << 26)
 
 #define MEGASAS_WATCHDOG_THREAD_INTERVAL	1000
 #define MEGASAS_WAIT_FOR_NEXT_DMA_MSECS		20
@@ -1762,7 +1807,7 @@ struct megasas_init_frame {
 	__le32 pad_0;		/*0Ch */
 
 	__le16 flags;		/*10h */
-	__le16 reserved_3;		/*12h */
+	__le16 replyqueue_mask;		/*12h */
 	__le32 data_xfer_len;	/*14h */
 
 	__le32 queue_info_new_phys_addr_lo;	/*18h */
@@ -2160,6 +2205,10 @@ struct megasas_aen_event {
 struct megasas_irq_context {
 	struct megasas_instance *instance;
 	u32 MSIxIndex;
+	u32 os_irq;
+	struct irq_poll irqpoll;
+	bool irq_poll_scheduled;
+	bool irq_line_enable;
 };
 
 struct MR_DRV_SYSTEM_INFO {
@@ -2190,6 +2239,23 @@ enum MR_PD_TYPE {
 #define MR_DEFAULT_NVME_MDTS_KB		128
 #define MR_NVME_PAGE_SIZE_MASK		0x000000FF
 
+/*Aero performance parameters*/
+#define MR_HIGH_IOPS_QUEUE_COUNT	8
+#define MR_DEVICE_HIGH_IOPS_DEPTH	8
+#define MR_HIGH_IOPS_BATCH_COUNT	16
+
+enum MR_PERF_MODE {
+	MR_BALANCED_PERF_MODE		= 0,
+	MR_IOPS_PERF_MODE		= 1,
+	MR_LATENCY_PERF_MODE		= 2,
+};
+
+#define MEGASAS_PERF_MODE_2STR(mode) \
+		((mode) == MR_BALANCED_PERF_MODE ? "Balanced" : \
+		 (mode) == MR_IOPS_PERF_MODE ? "IOPS" : \
+		 (mode) == MR_LATENCY_PERF_MODE ? "Latency" : \
+		 "Unknown")
+
 struct megasas_instance {
 
 	unsigned int *reply_map;
@@ -2246,6 +2312,7 @@ struct megasas_instance {
 	u32 secure_jbod_support;
 	u32 support_morethan256jbod; /* FW support for more than 256 PD/JBOD */
 	bool use_seqnum_jbod_fp;   /* Added for PD sequence */
+	bool smp_affinity_enable;
 	spinlock_t crashdump_lock;
 
 	struct megasas_register_set __iomem *reg_set;
@@ -2263,6 +2330,7 @@ struct megasas_instance {
 	u16 ldio_threshold;
 	u16 cur_can_queue;
 	u32 max_sectors_per_req;
+	bool msix_load_balance;
 	struct megasas_aen_event *ev;
 
 	struct megasas_cmd **cmd_list;
@@ -2290,15 +2358,13 @@ struct megasas_instance {
 	struct pci_dev *pdev;
 	u32 unique_id;
 	u32 fw_support_ieee;
+	u32 threshold_reply_count;
 
 	atomic_t fw_outstanding;
 	atomic_t ldio_outstanding;
 	atomic_t fw_reset_no_pci_access;
-	atomic_t ieee_sgl;
-	atomic_t prp_sgl;
-	atomic_t sge_holes_type1;
-	atomic_t sge_holes_type2;
-	atomic_t sge_holes_type3;
+	atomic64_t total_io_count;
+	atomic64_t high_iops_outstanding;
 
 	struct megasas_instance_template *instancet;
 	struct tasklet_struct isr_tasklet;
@@ -2366,8 +2432,18 @@ struct megasas_instance {
 	u8 task_abort_tmo;
 	u8 max_reset_tmo;
 	u8 snapdump_wait_time;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_root;
+	struct dentry *raidmap_dump;
+#endif
 	u8 enable_fw_dev_list;
+	bool atomic_desc_support;
+	bool support_seqnum_jbod_fp;
+	bool support_pci_lane_margining;
+	u8  low_latency_index_start;
+	int perf_mode;
 };
+
 struct MR_LD_VF_MAP {
 	u32 size;
 	union MR_LD_REF ref;
@@ -2623,4 +2699,9 @@ void megasas_fusion_stop_watchdog(struct megasas_instance *instance);
 void megasas_set_dma_settings(struct megasas_instance *instance,
 			      struct megasas_dcmd_frame *dcmd,
 			      dma_addr_t dma_addr, u32 dma_len);
+int megasas_adp_reset_wait_for_ready(struct megasas_instance *instance,
+				     bool do_adp_reset,
+				     int ocr_context);
+int megasas_irqpoll(struct irq_poll *irqpoll, int budget);
+void megasas_dump_fusion_io(struct scsi_cmnd *scmd);
 #endif				/*LSI_MEGARAID_SAS_H */