summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla1280.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/qla1280.c
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/scsi/qla1280.c')
-rw-r--r--drivers/scsi/qla1280.c4863
1 files changed, 4863 insertions, 0 deletions
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
new file mode 100644
index 000000000000..4ad280814990
--- /dev/null
+++ b/drivers/scsi/qla1280.c
@@ -0,0 +1,4863 @@
+/******************************************************************************
+* QLOGIC LINUX SOFTWARE
+*
+* QLogic QLA1280 (Ultra2) and QLA12160 (Ultra3) SCSI driver
+* Copyright (C) 2000 Qlogic Corporation (www.qlogic.com)
+* Copyright (C) 2001-2004 Jes Sorensen, Wild Open Source Inc.
+* Copyright (C) 2003-2004 Christoph Hellwig
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2, or (at your option) any
+* later version.
+*
+* This program is distributed in the hope that it will be useful, but
+* WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+* General Public License for more details.
+*
+******************************************************************************/
+#define QLA1280_VERSION "3.25"
+/*****************************************************************************
+ Revision History:
+ Rev 3.25.1, February 10, 2005 Christoph Hellwig
+ - use pci_map_single to map non-S/G requests
+ - remove qla1280_proc_info
+ Rev 3.25, September 28, 2004, Christoph Hellwig
+ - add support for ISP1020/1040
+ - don't include "scsi.h" anymore for 2.6.x
+ Rev 3.24.4 June 7, 2004 Christoph Hellwig
+ - restructure firmware loading, cleanup initialization code
+ - prepare support for ISP1020/1040 chips
+ Rev 3.24.3 January 19, 2004, Jes Sorensen
+ - Handle PCI DMA mask settings correctly
+ - Correct order of error handling in probe_one, free_irq should not
+ be called if request_irq failed
+ Rev 3.24.2 January 19, 2004, James Bottomley & Andrew Vasquez
+ - Big endian fixes (James)
+ - Remove bogus IOCB content on zero data transfer commands (Andrew)
+ Rev 3.24.1 January 5, 2004, Jes Sorensen
+ - Initialize completion queue to avoid OOPS on probe
+ - Handle interrupts during mailbox testing
+ Rev 3.24 November 17, 2003, Christoph Hellwig
+ - use struct list_head for completion queue
+ - avoid old Scsi_FOO typedefs
+ - cleanup 2.4 compat glue a bit
+ - use <scsi/scsi_*.h> headers on 2.6 instead of "scsi.h"
+ - make initialization for memory mapped vs port I/O more similar
+ - remove broken pci config space manipulation
+ - kill more cruft
+ - this is an almost perfect 2.6 scsi driver now! ;)
+ Rev 3.23.39 December 17, 2003, Jes Sorensen
+ - Delete completion queue from srb if mailbox command failed to
+ to avoid qla1280_done completeting qla1280_error_action's
+ obsolete context
+ - Reduce arguments for qla1280_done
+ Rev 3.23.38 October 18, 2003, Christoph Hellwig
+ - Convert to new-style hotplugable driver for 2.6
+ - Fix missing scsi_unregister/scsi_host_put on HBA removal
+ - Kill some more cruft
+ Rev 3.23.37 October 1, 2003, Jes Sorensen
+ - Make MMIO depend on CONFIG_X86_VISWS instead of yet another
+ random CONFIG option
+ - Clean up locking in probe path
+ Rev 3.23.36 October 1, 2003, Christoph Hellwig
+ - queuecommand only ever receives new commands - clear flags
+ - Reintegrate lost fixes from Linux 2.5
+ Rev 3.23.35 August 14, 2003, Jes Sorensen
+ - Build against 2.6
+ Rev 3.23.34 July 23, 2003, Jes Sorensen
+ - Remove pointless TRUE/FALSE macros
+ - Clean up vchan handling
+ Rev 3.23.33 July 3, 2003, Jes Sorensen
+ - Don't define register access macros before define determining MMIO.
+ This just happend to work out on ia64 but not elsewhere.
+ - Don't try and read from the card while it is in reset as
+ it won't respond and causes an MCA
+ Rev 3.23.32 June 23, 2003, Jes Sorensen
+ - Basic support for boot time arguments
+ Rev 3.23.31 June 8, 2003, Jes Sorensen
+ - Reduce boot time messages
+ Rev 3.23.30 June 6, 2003, Jes Sorensen
+ - Do not enable sync/wide/ppr before it has been determined
+ that the target device actually supports it
+ - Enable DMA arbitration for multi channel controllers
+ Rev 3.23.29 June 3, 2003, Jes Sorensen
+ - Port to 2.5.69
+ Rev 3.23.28 June 3, 2003, Jes Sorensen
+ - Eliminate duplicate marker commands on bus resets
+ - Handle outstanding commands appropriately on bus/device resets
+ Rev 3.23.27 May 28, 2003, Jes Sorensen
+ - Remove bogus input queue code, let the Linux SCSI layer do the work
+ - Clean up NVRAM handling, only read it once from the card
+ - Add a number of missing default nvram parameters
+ Rev 3.23.26 Beta May 28, 2003, Jes Sorensen
+ - Use completion queue for mailbox commands instead of busy wait
+ Rev 3.23.25 Beta May 27, 2003, James Bottomley
+ - Migrate to use new error handling code
+ Rev 3.23.24 Beta May 21, 2003, James Bottomley
+ - Big endian support
+ - Cleanup data direction code
+ Rev 3.23.23 Beta May 12, 2003, Jes Sorensen
+ - Switch to using MMIO instead of PIO
+ Rev 3.23.22 Beta April 15, 2003, Jes Sorensen
+ - Fix PCI parity problem with 12160 during reset.
+ Rev 3.23.21 Beta April 14, 2003, Jes Sorensen
+ - Use pci_map_page()/pci_unmap_page() instead of map_single version.
+ Rev 3.23.20 Beta April 9, 2003, Jes Sorensen
+ - Remove < 2.4.x support
+ - Introduce HOST_LOCK to make the spin lock changes portable.
+ - Remove a bunch of idiotic and unnecessary typedef's
+ - Kill all leftovers of target-mode support which never worked anyway
+ Rev 3.23.19 Beta April 11, 2002, Linus Torvalds
+ - Do qla1280_pci_config() before calling request_irq() and
+ request_region()
+ - Use pci_dma_hi32() to handle upper word of DMA addresses instead
+ of large shifts
+ - Hand correct arguments to free_irq() in case of failure
+ Rev 3.23.18 Beta April 11, 2002, Jes Sorensen
+ - Run source through Lindent and clean up the output
+ Rev 3.23.17 Beta April 11, 2002, Jes Sorensen
+ - Update SCSI firmware to qla1280 v8.15.00 and qla12160 v10.04.32
+ Rev 3.23.16 Beta March 19, 2002, Jes Sorensen
+ - Rely on mailbox commands generating interrupts - do not
+ run qla1280_isr() from ql1280_mailbox_command()
+ - Remove device_reg_t
+ - Integrate ql12160_set_target_parameters() with 1280 version
+ - Make qla1280_setup() non static
+ - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request
+ sent to the card - this command pauses the firmare!!!
+ Rev 3.23.15 Beta March 19, 2002, Jes Sorensen
+ - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions
+ - Remove a pile of pointless and confusing (srb_t **) and
+ (scsi_lu_t *) typecasts
+ - Explicit mark that we do not use the new error handling (for now)
+ - Remove scsi_qla_host_t and use 'struct' instead
+ - Remove in_abort, watchdog_enabled, dpc, dpc_sched, bios_enabled,
+ pci_64bit_slot flags which weren't used for anything anyway
+ - Grab host->host_lock while calling qla1280_isr() from abort()
+ - Use spin_lock()/spin_unlock() in qla1280_intr_handler() - we
+ do not need to save/restore flags in the interrupt handler
+ - Enable interrupts early (before any mailbox access) in preparation
+ for cleaning up the mailbox handling
+ Rev 3.23.14 Beta March 14, 2002, Jes Sorensen
+ - Further cleanups. Remove all trace of QL_DEBUG_LEVEL_x and replace
+ it with proper use of dprintk().
+ - Make qla1280_print_scsi_cmd() and qla1280_dump_buffer() both take
+ a debug level argument to determine if data is to be printed
+ - Add KERN_* info to printk()
+ Rev 3.23.13 Beta March 14, 2002, Jes Sorensen
+ - Significant cosmetic cleanups
+ - Change debug code to use dprintk() and remove #if mess
+ Rev 3.23.12 Beta March 13, 2002, Jes Sorensen
+ - More cosmetic cleanups, fix places treating return as function
+ - use cpu_relax() in qla1280_debounce_register()
+ Rev 3.23.11 Beta March 13, 2002, Jes Sorensen
+ - Make it compile under 2.5.5
+ Rev 3.23.10 Beta October 1, 2001, Jes Sorensen
+ - Do no typecast short * to long * in QL1280BoardTbl, this
+ broke miserably on big endian boxes
+ Rev 3.23.9 Beta September 30, 2001, Jes Sorensen
+ - Remove pre 2.2 hack for checking for reentrance in interrupt handler
+ - Make data types used to receive from SCSI_{BUS,TCN,LUN}_32
+ unsigned int to match the types from struct scsi_cmnd
+ Rev 3.23.8 Beta September 29, 2001, Jes Sorensen
+ - Remove bogus timer_t typedef from qla1280.h
+ - Remove obsolete pre 2.2 PCI setup code, use proper #define's
+ for PCI_ values, call pci_set_master()
+ - Fix memleak of qla1280_buffer on module unload
+ - Only compile module parsing code #ifdef MODULE - should be
+ changed to use individual MODULE_PARM's later
+ - Remove dummy_buffer that was never modified nor printed
+ - ENTER()/LEAVE() are noops unless QL_DEBUG_LEVEL_3, hence remove
+ #ifdef QL_DEBUG_LEVEL_3/#endif around ENTER()/LEAVE() calls
+ - Remove \r from print statements, this is Linux, not DOS
+ - Remove obsolete QLA1280_{SCSILU,INTR,RING}_{LOCK,UNLOCK}
+ dummy macros
+ - Remove C++ compile hack in header file as Linux driver are not
+ supposed to be compiled as C++
+ - Kill MS_64BITS macro as it makes the code more readable
+ - Remove unnecessary flags.in_interrupts bit
+ Rev 3.23.7 Beta August 20, 2001, Jes Sorensen
+ - Dont' check for set flags on q->q_flag one by one in qla1280_next()
+ - Check whether the interrupt was generated by the QLA1280 before
+ doing any processing
+ - qla1280_status_entry(): Only zero out part of sense_buffer that
+ is not being copied into
+ - Remove more superflouous typecasts
+ - qla1280_32bit_start_scsi() replace home-brew memcpy() with memcpy()
+ Rev 3.23.6 Beta August 20, 2001, Tony Luck, Intel
+ - Don't walk the entire list in qla1280_putq_t() just to directly
+ grab the pointer to the last element afterwards
+ Rev 3.23.5 Beta August 9, 2001, Jes Sorensen
+ - Don't use SA_INTERRUPT, it's use is deprecated for this kinda driver
+ Rev 3.23.4 Beta August 8, 2001, Jes Sorensen
+ - Set dev->max_sectors to 1024
+ Rev 3.23.3 Beta August 6, 2001, Jes Sorensen
+ - Provide compat macros for pci_enable_device(), pci_find_subsys()
+ and scsi_set_pci_device()
+ - Call scsi_set_pci_device() for all devices
+ - Reduce size of kernel version dependent device probe code
+ - Move duplicate probe/init code to separate function
+ - Handle error if qla1280_mem_alloc() fails
+ - Kill OFFSET() macro and use Linux's PCI definitions instead
+ - Kill private structure defining PCI config space (struct config_reg)
+ - Only allocate I/O port region if not in MMIO mode
+ - Remove duplicate (unused) sanity check of sife of srb_t
+ Rev 3.23.2 Beta August 6, 2001, Jes Sorensen
+ - Change home-brew memset() implementations to use memset()
+ - Remove all references to COMTRACE() - accessing a PC's COM2 serial
+ port directly is not legal under Linux.
+ Rev 3.23.1 Beta April 24, 2001, Jes Sorensen
+ - Remove pre 2.2 kernel support
+ - clean up 64 bit DMA setting to use 2.4 API (provide backwards compat)
+ - Fix MMIO access to use readl/writel instead of directly
+ dereferencing pointers
+ - Nuke MSDOS debugging code
+ - Change true/false data types to int from uint8_t
+ - Use int for counters instead of uint8_t etc.
+ - Clean up size & byte order conversion macro usage
+ Rev 3.23 Beta January 11, 2001 BN Qlogic
+ - Added check of device_id when handling non
+ QLA12160s during detect().
+ Rev 3.22 Beta January 5, 2001 BN Qlogic
+ - Changed queue_task() to schedule_task()
+ for kernels 2.4.0 and higher.
+ Note: 2.4.0-testxx kernels released prior to
+ the actual 2.4.0 kernel release on January 2001
+ will get compile/link errors with schedule_task().
+ Please update your kernel to released 2.4.0 level,
+ or comment lines in this file flagged with 3.22
+ to resolve compile/link error of schedule_task().
+ - Added -DCONFIG_SMP in addition to -D__SMP__
+ in Makefile for 2.4.0 builds of driver as module.
+ Rev 3.21 Beta January 4, 2001 BN Qlogic
+ - Changed criteria of 64/32 Bit mode of HBA
+ operation according to BITS_PER_LONG rather
+ than HBA's NVRAM setting of >4Gig memory bit;
+ so that the HBA auto-configures without the need
+ to setup each system individually.
+ Rev 3.20 Beta December 5, 2000 BN Qlogic
+ - Added priority handling to IA-64 onboard SCSI
+ ISP12160 chip for kernels greater than 2.3.18.
+ - Added irqrestore for qla1280_intr_handler.
+ - Enabled /proc/scsi/qla1280 interface.
+ - Clear /proc/scsi/qla1280 counters in detect().
+ Rev 3.19 Beta October 13, 2000 BN Qlogic
+ - Declare driver_template for new kernel
+ (2.4.0 and greater) scsi initialization scheme.
+ - Update /proc/scsi entry for 2.3.18 kernels and
+ above as qla1280
+ Rev 3.18 Beta October 10, 2000 BN Qlogic
+ - Changed scan order of adapters to map
+ the QLA12160 followed by the QLA1280.
+ Rev 3.17 Beta September 18, 2000 BN Qlogic
+ - Removed warnings for 32 bit 2.4.x compiles
+ - Corrected declared size for request and response
+ DMA addresses that are kept in each ha
+ Rev. 3.16 Beta August 25, 2000 BN Qlogic
+ - Corrected 64 bit addressing issue on IA-64
+ where the upper 32 bits were not properly
+ passed to the RISC engine.
+ Rev. 3.15 Beta August 22, 2000 BN Qlogic
+ - Modified qla1280_setup_chip to properly load
+ ISP firmware for greater that 4 Gig memory on IA-64
+ Rev. 3.14 Beta August 16, 2000 BN Qlogic
+ - Added setting of dma_mask to full 64 bit
+ if flags.enable_64bit_addressing is set in NVRAM
+ Rev. 3.13 Beta August 16, 2000 BN Qlogic
+ - Use new PCI DMA mapping APIs for 2.4.x kernel
+ Rev. 3.12 July 18, 2000 Redhat & BN Qlogic
+ - Added check of pci_enable_device to detect() for 2.3.x
+ - Use pci_resource_start() instead of
+ pdev->resource[0].start in detect() for 2.3.x
+ - Updated driver version
+ Rev. 3.11 July 14, 2000 BN Qlogic
+ - Updated SCSI Firmware to following versions:
+ qla1x80: 8.13.08
+ qla1x160: 10.04.08
+ - Updated driver version to 3.11
+ Rev. 3.10 June 23, 2000 BN Qlogic
+ - Added filtering of AMI SubSys Vendor ID devices
+ Rev. 3.9
+ - DEBUG_QLA1280 undefined and new version BN Qlogic
+ Rev. 3.08b May 9, 2000 MD Dell
+ - Added logic to check against AMI subsystem vendor ID
+ Rev. 3.08 May 4, 2000 DG Qlogic
+ - Added logic to check for PCI subsystem ID.
+ Rev. 3.07 Apr 24, 2000 DG & BN Qlogic
+ - Updated SCSI Firmware to following versions:
+ qla12160: 10.01.19
+ qla1280: 8.09.00
+ Rev. 3.06 Apr 12, 2000 DG & BN Qlogic
+ - Internal revision; not released
+ Rev. 3.05 Mar 28, 2000 DG & BN Qlogic
+ - Edit correction for virt_to_bus and PROC.
+ Rev. 3.04 Mar 28, 2000 DG & BN Qlogic
+ - Merge changes from ia64 port.
+ Rev. 3.03 Mar 28, 2000 BN Qlogic
+ - Increase version to reflect new code drop with compile fix
+ of issue with inclusion of linux/spinlock for 2.3 kernels
+ Rev. 3.02 Mar 15, 2000 BN Qlogic
+ - Merge qla1280_proc_info from 2.10 code base
+ Rev. 3.01 Feb 10, 2000 BN Qlogic
+ - Corrected code to compile on a 2.2.x kernel.
+ Rev. 3.00 Jan 17, 2000 DG Qlogic
+ - Added 64-bit support.
+ Rev. 2.07 Nov 9, 1999 DG Qlogic
+ - Added new routine to set target parameters for ISP12160.
+ Rev. 2.06 Sept 10, 1999 DG Qlogic
+ - Added support for ISP12160 Ultra 3 chip.
+ Rev. 2.03 August 3, 1999 Fred Lewis, Intel DuPont
+ - Modified code to remove errors generated when compiling with
+ Cygnus IA64 Compiler.
+ - Changed conversion of pointers to unsigned longs instead of integers.
+ - Changed type of I/O port variables from uint32_t to unsigned long.
+ - Modified OFFSET macro to work with 64-bit as well as 32-bit.
+ - Changed sprintf and printk format specifiers for pointers to %p.
+ - Changed some int to long type casts where needed in sprintf & printk.
+ - Added l modifiers to sprintf and printk format specifiers for longs.
+ - Removed unused local variables.
+ Rev. 1.20 June 8, 1999 DG, Qlogic
+ Changes to support RedHat release 6.0 (kernel 2.2.5).
+ - Added SCSI exclusive access lock (io_request_lock) when accessing
+ the adapter.
+ - Added changes for the new LINUX interface template. Some new error
+ handling routines have been added to the template, but for now we
+ will use the old ones.
+ - Initial Beta Release.
+*****************************************************************************/
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/processor.h>
+#include <asm/types.h>
+#include <asm/system.h>
+
+#if LINUX_VERSION_CODE >= 0x020545
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#else
+#include <linux/blk.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "sd.h"
+#endif
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
+#include <asm/sn/io.h>
+#endif
+
+#if LINUX_VERSION_CODE < 0x020407
+#error "Kernels older than 2.4.7 are no longer supported"
+#endif
+
+
+/*
+ * Compile time Options:
+ * 0 - Disable and 1 - Enable
+ */
+#define DEBUG_QLA1280_INTR 0
+#define DEBUG_PRINT_NVRAM 0
+#define DEBUG_QLA1280 0
+
+/*
+ * The SGI VISWS is broken and doesn't support MMIO ;-(
+ */
+#ifdef CONFIG_X86_VISWS
+#define MEMORY_MAPPED_IO 0
+#else
+#define MEMORY_MAPPED_IO 1
+#endif
+
+#define UNIQUE_FW_NAME
+#include "qla1280.h"
+#include "ql12160_fw.h" /* ISP RISC codes */
+#include "ql1280_fw.h"
+#include "ql1040_fw.h"
+
+
+/*
+ * Missing PCI ID's
+ */
+#ifndef PCI_DEVICE_ID_QLOGIC_ISP1080
+#define PCI_DEVICE_ID_QLOGIC_ISP1080 0x1080
+#endif
+#ifndef PCI_DEVICE_ID_QLOGIC_ISP1240
+#define PCI_DEVICE_ID_QLOGIC_ISP1240 0x1240
+#endif
+#ifndef PCI_DEVICE_ID_QLOGIC_ISP1280
+#define PCI_DEVICE_ID_QLOGIC_ISP1280 0x1280
+#endif
+#ifndef PCI_DEVICE_ID_QLOGIC_ISP10160
+#define PCI_DEVICE_ID_QLOGIC_ISP10160 0x1016
+#endif
+#ifndef PCI_DEVICE_ID_QLOGIC_ISP12160
+#define PCI_DEVICE_ID_QLOGIC_ISP12160 0x1216
+#endif
+
+#ifndef PCI_VENDOR_ID_AMI
+#define PCI_VENDOR_ID_AMI 0x101e
+#endif
+
+#ifndef BITS_PER_LONG
+#error "BITS_PER_LONG not defined!"
+#endif
+#if (BITS_PER_LONG == 64) || defined CONFIG_HIGHMEM
+#define QLA_64BIT_PTR 1
+#endif
+
+#ifdef QLA_64BIT_PTR
+#define pci_dma_hi32(a) ((a >> 16) >> 16)
+#else
+#define pci_dma_hi32(a) 0
+#endif
+#define pci_dma_lo32(a) (a & 0xffffffff)
+
+#define NVRAM_DELAY() udelay(500) /* 2 microseconds */
+
+#if LINUX_VERSION_CODE < 0x020500
+#define HOST_LOCK &io_request_lock
+#define irqreturn_t void
+#define IRQ_RETVAL(foo)
+#define MSG_ORDERED_TAG 1
+
+#define DMA_BIDIRECTIONAL SCSI_DATA_UNKNOWN
+#define DMA_TO_DEVICE SCSI_DATA_WRITE
+#define DMA_FROM_DEVICE SCSI_DATA_READ
+#define DMA_NONE SCSI_DATA_NONE
+
+#ifndef HAVE_SECTOR_T
+typedef unsigned int sector_t;
+#endif
+
+static inline void
+scsi_adjust_queue_depth(struct scsi_device *device, int tag, int depth)
+{
+ if (tag) {
+ device->tagged_queue = tag;
+ device->current_tag = 0;
+ }
+ device->queue_depth = depth;
+}
+static inline struct Scsi_Host *scsi_host_alloc(Scsi_Host_Template *t, size_t s)
+{
+ return scsi_register(t, s);
+}
+static inline void scsi_host_put(struct Scsi_Host *h)
+{
+ scsi_unregister(h);
+}
+#else
+#define HOST_LOCK ha->host->host_lock
+#endif
+#if LINUX_VERSION_CODE < 0x020600
+#define DEV_SIMPLE_TAGS(device) device->tagged_queue
+/*
+ * Hack around that qla1280_remove_one is called from
+ * qla1280_release in 2.4
+ */
+#undef __devexit
+#define __devexit
+#else
+#define DEV_SIMPLE_TAGS(device) device->simple_tags
+#endif
+#if defined(__ia64__) && !defined(ia64_platform_is)
+#define ia64_platform_is(foo) (!strcmp(x, platform_name))
+#endif
+
+
+#define IS_ISP1040(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020)
+#define IS_ISP1x40(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020 || \
+ ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1240)
+#define IS_ISP1x160(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \
+ ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160)
+
+
+static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *);
+static void qla1280_remove_one(struct pci_dev *);
+
+/*
+ * QLogic Driver Support Function Prototypes.
+ */
+static void qla1280_done(struct scsi_qla_host *);
+#if LINUX_VERSION_CODE < 0x020545
+static void qla1280_get_target_options(struct scsi_cmnd *, struct scsi_qla_host *);
+#endif
+static int qla1280_get_token(char *);
+static int qla1280_setup(char *s) __init;
+
+/*
+ * QLogic ISP1280 Hardware Support Function Prototypes.
+ */
+static int qla1280_load_firmware(struct scsi_qla_host *);
+static int qla1280_init_rings(struct scsi_qla_host *);
+static int qla1280_nvram_config(struct scsi_qla_host *);
+static int qla1280_mailbox_command(struct scsi_qla_host *,
+ uint8_t, uint16_t *);
+static int qla1280_bus_reset(struct scsi_qla_host *, int);
+static int qla1280_device_reset(struct scsi_qla_host *, int, int);
+static int qla1280_abort_device(struct scsi_qla_host *, int, int, int);
+static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
+static int qla1280_abort_isp(struct scsi_qla_host *);
+#ifdef QLA_64BIT_PTR
+static int qla1280_64bit_start_scsi(struct scsi_qla_host *, struct srb *);
+#else
+static int qla1280_32bit_start_scsi(struct scsi_qla_host *, struct srb *);
+#endif
+static void qla1280_nv_write(struct scsi_qla_host *, uint16_t);
+static void qla1280_poll(struct scsi_qla_host *);
+static void qla1280_reset_adapter(struct scsi_qla_host *);
+static void qla1280_marker(struct scsi_qla_host *, int, int, int, u8);
+static void qla1280_isp_cmd(struct scsi_qla_host *);
+static void qla1280_isr(struct scsi_qla_host *, struct list_head *);
+static void qla1280_rst_aen(struct scsi_qla_host *);
+static void qla1280_status_entry(struct scsi_qla_host *, struct response *,
+ struct list_head *);
+static void qla1280_error_entry(struct scsi_qla_host *, struct response *,
+ struct list_head *);
+static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *, uint32_t);
+static uint16_t qla1280_nvram_request(struct scsi_qla_host *, uint32_t);
+static uint16_t qla1280_debounce_register(volatile uint16_t __iomem *);
+static request_t *qla1280_req_pkt(struct scsi_qla_host *);
+static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *,
+ unsigned int);
+static void qla1280_get_target_parameters(struct scsi_qla_host *,
+ struct scsi_device *);
+static int qla1280_set_target_parameters(struct scsi_qla_host *, int, int);
+
+
+static struct qla_driver_setup driver_setup;
+
+/*
+ * convert scsi data direction to request_t control flags
+ */
+static inline uint16_t
+qla1280_data_direction(struct scsi_cmnd *cmnd)
+{
+ switch(cmnd->sc_data_direction) {
+ case DMA_FROM_DEVICE:
+ return BIT_5;
+ case DMA_TO_DEVICE:
+ return BIT_6;
+ case DMA_BIDIRECTIONAL:
+ return BIT_5 | BIT_6;
+ /*
+ * We could BUG() on default here if one of the four cases aren't
+ * met, but then again if we receive something like that from the
+ * SCSI layer we have more serious problems. This shuts up GCC.
+ */
+ case DMA_NONE:
+ default:
+ return 0;
+ }
+}
+
+#if DEBUG_QLA1280
+static void __qla1280_print_scsi_cmd(struct scsi_cmnd * cmd);
+static void __qla1280_dump_buffer(char *, int);
+#endif
+
+
+/*
+ * insmod needs to find the variable and make it point to something
+ */
+#ifdef MODULE
+static char *qla1280;
+
+/* insmod qla1280 options=verbose" */
+module_param(qla1280, charp, 0);
+#else
+__setup("qla1280=", qla1280_setup);
+#endif
+
+
+/*
+ * We use the scsi_pointer structure that's included with each scsi_command
+ * to overlay our struct srb over it. qla1280_init() checks that a srb is not
+ * bigger than a scsi_pointer.
+ */
+
+#define CMD_SP(Cmnd) &Cmnd->SCp
+#define CMD_CDBLEN(Cmnd) Cmnd->cmd_len
+#define CMD_CDBP(Cmnd) Cmnd->cmnd
+#define CMD_SNSP(Cmnd) Cmnd->sense_buffer
+#define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer)
+#define CMD_RESULT(Cmnd) Cmnd->result
+#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
+#if LINUX_VERSION_CODE < 0x020545
+#define CMD_REQUEST(Cmnd) Cmnd->request.cmd
+#else
+#define CMD_REQUEST(Cmnd) Cmnd->request->cmd
+#endif
+
+#define CMD_HOST(Cmnd) Cmnd->device->host
+#define SCSI_BUS_32(Cmnd) Cmnd->device->channel
+#define SCSI_TCN_32(Cmnd) Cmnd->device->id
+#define SCSI_LUN_32(Cmnd) Cmnd->device->lun
+
+
+/*****************************************/
+/* ISP Boards supported by this driver */
+/*****************************************/
+
+struct qla_boards {
+ unsigned char name[9]; /* Board ID String */
+ int numPorts; /* Number of SCSI ports */
+ unsigned short *fwcode; /* pointer to FW array */
+ unsigned short *fwlen; /* number of words in array */
+ unsigned short *fwstart; /* start address for F/W */
+ unsigned char *fwver; /* Ptr to F/W version array */
+};
+
+/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
+static struct pci_device_id qla1280_pci_tbl[] = {
+ {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+#ifdef CONFIG_SCSI_QLOGIC_1280_1040
+ {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+#endif
+ {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+ {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+ {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1280,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
+ {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP10160,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
+ {0,}
+};
+MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
+
+static struct qla_boards ql1280_board_tbl[] = {
+ /* Name , Number of ports, FW details */
+ {"QLA12160", 2, &fw12160i_code01[0], &fw12160i_length01,
+ &fw12160i_addr01, &fw12160i_version_str[0]},
+ {"QLA1040", 1, &risc_code01[0], &risc_code_length01,
+ &risc_code_addr01, &firmware_version[0]},
+ {"QLA1080", 1, &fw1280ei_code01[0], &fw1280ei_length01,
+ &fw1280ei_addr01, &fw1280ei_version_str[0]},
+ {"QLA1240", 2, &fw1280ei_code01[0], &fw1280ei_length01,
+ &fw1280ei_addr01, &fw1280ei_version_str[0]},
+ {"QLA1280", 2, &fw1280ei_code01[0], &fw1280ei_length01,
+ &fw1280ei_addr01, &fw1280ei_version_str[0]},
+ {"QLA10160", 1, &fw12160i_code01[0], &fw12160i_length01,
+ &fw12160i_addr01, &fw12160i_version_str[0]},
+ {" ", 0}
+};
+
+static int qla1280_verbose = 1;
+
+#if DEBUG_QLA1280
+static int ql_debug_level = 1;
+#define dprintk(level, format, a...) \
+ do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0)
+#define qla1280_dump_buffer(level, buf, size) \
+ if (ql_debug_level >= level) __qla1280_dump_buffer(buf, size)
+#define qla1280_print_scsi_cmd(level, cmd) \
+ if (ql_debug_level >= level) __qla1280_print_scsi_cmd(cmd)
+#else
+#define ql_debug_level 0
+#define dprintk(level, format, a...) do{}while(0)
+#define qla1280_dump_buffer(a, b, c) do{}while(0)
+#define qla1280_print_scsi_cmd(a, b) do{}while(0)
+#endif
+
+#define ENTER(x) dprintk(3, "qla1280 : Entering %s()\n", x);
+#define LEAVE(x) dprintk(3, "qla1280 : Leaving %s()\n", x);
+#define ENTER_INTR(x) dprintk(4, "qla1280 : Entering %s()\n", x);
+#define LEAVE_INTR(x) dprintk(4, "qla1280 : Leaving %s()\n", x);
+
+
+static int qla1280_read_nvram(struct scsi_qla_host *ha)
+{
+ uint16_t *wptr;
+ uint8_t chksum;
+ int cnt, i;
+ struct nvram *nv;
+
+ ENTER("qla1280_read_nvram");
+
+ if (driver_setup.no_nvram)
+ return 1;
+
+ printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no);
+
+ wptr = (uint16_t *)&ha->nvram;
+ nv = &ha->nvram;
+ chksum = 0;
+ for (cnt = 0; cnt < 3; cnt++) {
+ *wptr = qla1280_get_nvram_word(ha, cnt);
+ chksum += *wptr & 0xff;
+ chksum += (*wptr >> 8) & 0xff;
+ wptr++;
+ }
+
+ if (nv->id0 != 'I' || nv->id1 != 'S' ||
+ nv->id2 != 'P' || nv->id3 != ' ' || nv->version < 1) {
+ dprintk(2, "Invalid nvram ID or version!\n");
+ chksum = 1;
+ } else {
+ for (; cnt < sizeof(struct nvram); cnt++) {
+ *wptr = qla1280_get_nvram_word(ha, cnt);
+ chksum += *wptr & 0xff;
+ chksum += (*wptr >> 8) & 0xff;
+ wptr++;
+ }
+ }
+
+ dprintk(3, "qla1280_read_nvram: NVRAM Magic ID= %c %c %c %02x"
+ " version %i\n", nv->id0, nv->id1, nv->id2, nv->id3,
+ nv->version);
+
+
+ if (chksum) {
+ if (!driver_setup.no_nvram)
+ printk(KERN_WARNING "scsi(%ld): Unable to identify or "
+ "validate NVRAM checksum, using default "
+ "settings\n", ha->host_no);
+ ha->nvram_valid = 0;
+ } else
+ ha->nvram_valid = 1;
+
+ /* The firmware interface is, um, interesting, in that the
+ * actual firmware image on the chip is little endian, thus,
+ * the process of taking that image to the CPU would end up
+ * little endian. However, the firmare interface requires it
+ * to be read a word (two bytes) at a time.
+ *
+ * The net result of this would be that the word (and
+ * doubleword) quantites in the firmware would be correct, but
+ * the bytes would be pairwise reversed. Since most of the
+ * firmware quantites are, in fact, bytes, we do an extra
+ * le16_to_cpu() in the firmware read routine.
+ *
+ * The upshot of all this is that the bytes in the firmware
+ * are in the correct places, but the 16 and 32 bit quantites
+ * are still in little endian format. We fix that up below by
+ * doing extra reverses on them */
+ nv->isp_parameter = cpu_to_le16(nv->isp_parameter);
+ nv->firmware_feature.w = cpu_to_le16(nv->firmware_feature.w);
+ for(i = 0; i < MAX_BUSES; i++) {
+ nv->bus[i].selection_timeout = cpu_to_le16(nv->bus[i].selection_timeout);
+ nv->bus[i].max_queue_depth = cpu_to_le16(nv->bus[i].max_queue_depth);
+ }
+ dprintk(1, "qla1280_read_nvram: Completed Reading NVRAM\n");
+ LEAVE("qla1280_read_nvram");
+
+ return chksum;
+}
+
+/**************************************************************************
+ * qla1280_info
+ * Return a string describing the driver.
+ **************************************************************************/
+static const char *
+qla1280_info(struct Scsi_Host *host)
+{
+ static char qla1280_scsi_name_buffer[125];
+ char *bp;
+ struct scsi_qla_host *ha;
+ struct qla_boards *bdp;
+
+ bp = &qla1280_scsi_name_buffer[0];
+ ha = (struct scsi_qla_host *)host->hostdata;
+ bdp = &ql1280_board_tbl[ha->devnum];
+ memset(bp, 0, sizeof(qla1280_scsi_name_buffer));
+
+ sprintf (bp,
+ "QLogic %s PCI to SCSI Host Adapter\n"
+ " Firmware version: %2d.%02d.%02d, Driver version %s",
+ &bdp->name[0], bdp->fwver[0], bdp->fwver[1], bdp->fwver[2],
+ QLA1280_VERSION);
+ return bp;
+}
+
+/**************************************************************************
+ * qla1200_queuecommand
+ * Queue a command to the controller.
+ *
+ * Note:
+ * The mid-level driver tries to ensures that queuecommand never gets invoked
+ * concurrently with itself or the interrupt handler (although the
+ * interrupt handler may call this routine as part of request-completion
+ * handling). Unfortunely, it sometimes calls the scheduler in interrupt
+ * context which is a big NO! NO!.
+ **************************************************************************/
+static int
+qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
+ struct srb *sp = (struct srb *)&cmd->SCp;
+ int status;
+
+ cmd->scsi_done = fn;
+ sp->cmd = cmd;
+ sp->flags = 0;
+
+ qla1280_print_scsi_cmd(5, cmd);
+
+#ifdef QLA_64BIT_PTR
+ /*
+ * Using 64 bit commands if the PCI bridge doesn't support it is a
+ * bit wasteful, however this should really only happen if one's
+ * PCI controller is completely broken, like the BCM1250. For
+ * sane hardware this is not an issue.
+ */
+ status = qla1280_64bit_start_scsi(ha, sp);
+#else
+ status = qla1280_32bit_start_scsi(ha, sp);
+#endif
+ return status;
+}
+
+enum action {
+ ABORT_COMMAND,
+ ABORT_DEVICE,
+ DEVICE_RESET,
+ BUS_RESET,
+ ADAPTER_RESET,
+ FAIL
+};
+
+/* timer action for error action processor */
+static void qla1280_error_wait_timeout(unsigned long __data)
+{
+ struct scsi_cmnd *cmd = (struct scsi_cmnd *)__data;
+ struct srb *sp = (struct srb *)CMD_SP(cmd);
+
+ complete(sp->wait);
+}
+
+static void qla1280_mailbox_timeout(unsigned long __data)
+{
+ struct scsi_qla_host *ha = (struct scsi_qla_host *)__data;
+ struct device_reg __iomem *reg;
+ reg = ha->iobase;
+
+ ha->mailbox_out[0] = RD_REG_WORD(&reg->mailbox0);
+ printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, "
+ "ictrl %04x, istatus %04x\n", ha->host_no, ha->mailbox_out[0],
+ RD_REG_WORD(&reg->ictrl), RD_REG_WORD(&reg->istatus));
+ complete(ha->mailbox_wait);
+}
+
+/**************************************************************************
+ * qla1200_error_action
+ * The function will attempt to perform a specified error action and
+ * wait for the results (or time out).
+ *
+ * Input:
+ * cmd = Linux SCSI command packet of the command that cause the
+ * bus reset.
+ * action = error action to take (see action_t)
+ *
+ * Returns:
+ * SUCCESS or FAILED
+ *
+ * Note:
+ * Resetting the bus always succeeds - is has to, otherwise the
+ * kernel will panic! Try a surgical technique - sending a BUS
+ * DEVICE RESET message - on the offending target before pulling
+ * the SCSI bus reset line.
+ **************************************************************************/
+static int
+qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
+{
+ struct scsi_qla_host *ha;
+ int bus, target, lun;
+ struct srb *sp;
+ uint16_t data;
+ unsigned char *handle;
+ int result, i;
+ DECLARE_COMPLETION(wait);
+ struct timer_list timer;
+
+ ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
+
+ dprintk(4, "error_action %i, istatus 0x%04x\n", action,
+ RD_REG_WORD(&ha->iobase->istatus));
+
+ dprintk(4, "host_cmd 0x%04x, ictrl 0x%04x, jiffies %li\n",
+ RD_REG_WORD(&ha->iobase->host_cmd),
+ RD_REG_WORD(&ha->iobase->ictrl), jiffies);
+
+ ENTER("qla1280_error_action");
+ if (qla1280_verbose)
+ printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
+ "Handle=0x%p, action=0x%x\n",
+ ha->host_no, cmd, CMD_HANDLE(cmd), action);
+
+ if (cmd == NULL) {
+ printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL "
+ "si_Cmnd pointer, failing.\n");
+ LEAVE("qla1280_error_action");
+ return FAILED;
+ }
+
+ ha = (struct scsi_qla_host *)cmd->device->host->hostdata;
+ sp = (struct srb *)CMD_SP(cmd);
+ handle = CMD_HANDLE(cmd);
+
+ /* Check for pending interrupts. */
+ data = qla1280_debounce_register(&ha->iobase->istatus);
+ /*
+ * The io_request_lock is held when the reset handler is called, hence
+ * the interrupt handler cannot be running in parallel as it also
+ * grabs the lock. /Jes
+ */
+ if (data & RISC_INT)
+ qla1280_isr(ha, &ha->done_q);
+
+ /*
+ * Determine the suggested action that the mid-level driver wants
+ * us to perform.
+ */
+ if (handle == (unsigned char *)INVALID_HANDLE || handle == NULL) {
+ if(action == ABORT_COMMAND) {
+ /* we never got this command */
+ printk(KERN_INFO "qla1280: Aborting a NULL handle\n");
+ return SUCCESS; /* no action - we don't have command */
+ }
+ } else {
+ sp->wait = &wait;
+ }
+
+ bus = SCSI_BUS_32(cmd);
+ target = SCSI_TCN_32(cmd);
+ lun = SCSI_LUN_32(cmd);
+
+ /* Overloading result. Here it means the success or fail of the
+ * *issue* of the action. When we return from the routine, it must
+ * mean the actual success or fail of the action */
+ result = FAILED;
+ switch (action) {
+ case FAIL:
+ break;
+
+ case ABORT_COMMAND:
+ if ((sp->flags & SRB_ABORT_PENDING)) {
+ printk(KERN_WARNING
+ "scsi(): Command has a pending abort "
+ "message - ABORT_PENDING.\n");
+ /* This should technically be impossible since we
+ * now wait for abort completion */
+ break;
+ }
+
+ for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
+ if (sp == ha->outstanding_cmds[i]) {
+ dprintk(1, "qla1280: RISC aborting command\n");
+ if (qla1280_abort_command(ha, sp, i) == 0)
+ result = SUCCESS;
+ else {
+ /*
+ * Since we don't know what might
+ * have happend to the command, it
+ * is unsafe to remove it from the
+ * device's queue at this point.
+ * Wait and let the escalation
+ * process take care of it.
+ */
+ printk(KERN_WARNING
+ "scsi(%li:%i:%i:%i): Unable"
+ " to abort command!\n",
+ ha->host_no, bus, target, lun);
+ }
+ }
+ }
+ break;
+
+ case ABORT_DEVICE:
+ ha->flags.in_reset = 1;
+ if (qla1280_verbose)
+ printk(KERN_INFO
+ "scsi(%ld:%d:%d:%d): Queueing abort device "
+ "command.\n", ha->host_no, bus, target, lun);
+ if (qla1280_abort_device(ha, bus, target, lun) == 0)
+ result = SUCCESS;
+ break;
+
+ case DEVICE_RESET:
+ if (qla1280_verbose)
+ printk(KERN_INFO
+ "scsi(%ld:%d:%d:%d): Queueing device reset "
+ "command.\n", ha->host_no, bus, target, lun);
+ ha->flags.in_reset = 1;
+ if (qla1280_device_reset(ha, bus, target) == 0)
+ result = SUCCESS;
+ break;
+
+ case BUS_RESET:
+ if (qla1280_verbose)
+ printk(KERN_INFO "qla1280(%ld:%d): Issuing BUS "
+ "DEVICE RESET\n", ha->host_no, bus);
+ ha->flags.in_reset = 1;
+ if (qla1280_bus_reset(ha, bus == 0))
+ result = SUCCESS;
+
+ break;
+
+ case ADAPTER_RESET:
+ default:
+ if (qla1280_verbose) {
+ printk(KERN_INFO
+ "scsi(%ld): Issued ADAPTER RESET\n",
+ ha->host_no);
+ printk(KERN_INFO "scsi(%ld): I/O processing will "
+ "continue automatically\n", ha->host_no);
+ }
+ ha->flags.reset_active = 1;
+ /*
+ * We restarted all of the commands automatically, so the
+ * mid-level code can expect completions momentitarily.
+ */
+ if (qla1280_abort_isp(ha) == 0)
+ result = SUCCESS;
+
+ ha->flags.reset_active = 0;
+ }
+
+ if (!list_empty(&ha->done_q))
+ qla1280_done(ha);
+ ha->flags.in_reset = 0;
+
+ /* If we didn't manage to issue the action, or we have no
+ * command to wait for, exit here */
+ if (result == FAILED || handle == NULL ||
+ handle == (unsigned char *)INVALID_HANDLE) {
+ /*
+ * Clear completion queue to avoid qla1280_done() trying
+ * to complete the command at a later stage after we
+ * have exited the current context
+ */
+ sp->wait = NULL;
+ goto leave;
+ }
+
+ /* set up a timer just in case we're really jammed */
+ init_timer(&timer);
+ timer.expires = jiffies + 4*HZ;
+ timer.data = (unsigned long)cmd;
+ timer.function = qla1280_error_wait_timeout;
+ add_timer(&timer);
+
+ /* wait for the action to complete (or the timer to expire) */
+ spin_unlock_irq(HOST_LOCK);
+ wait_for_completion(&wait);
+ del_timer_sync(&timer);
+ spin_lock_irq(HOST_LOCK);
+ sp->wait = NULL;
+
+ /* the only action we might get a fail for is abort */
+ if (action == ABORT_COMMAND) {
+ if(sp->flags & SRB_ABORTED)
+ result = SUCCESS;
+ else
+ result = FAILED;
+ }
+
+ leave:
+ dprintk(1, "RESET returning %d\n", result);
+
+ LEAVE("qla1280_error_action");
+ return result;
+}
+
+/**************************************************************************
+ * qla1280_abort
+ * Abort the specified SCSI command(s).
+ **************************************************************************/
+static int
+qla1280_eh_abort(struct scsi_cmnd * cmd)
+{
+ return qla1280_error_action(cmd, ABORT_COMMAND);
+}
+
+/**************************************************************************
+ * qla1280_device_reset
+ * Reset the specified SCSI device
+ **************************************************************************/
+static int
+qla1280_eh_device_reset(struct scsi_cmnd *cmd)
+{
+ return qla1280_error_action(cmd, DEVICE_RESET);
+}
+
+/**************************************************************************
+ * qla1280_bus_reset
+ * Reset the specified bus.
+ **************************************************************************/
+static int
+qla1280_eh_bus_reset(struct scsi_cmnd *cmd)
+{
+ return qla1280_error_action(cmd, BUS_RESET);
+}
+
+/**************************************************************************
+ * qla1280_adapter_reset
+ * Reset the specified adapter (both channels)
+ **************************************************************************/
+static int
+qla1280_eh_adapter_reset(struct scsi_cmnd *cmd)
+{
+ return qla1280_error_action(cmd, ADAPTER_RESET);
+}
+
+static int
+qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int geom[])
+{
+ int heads, sectors, cylinders;
+
+ heads = 64;
+ sectors = 32;
+ cylinders = (unsigned long)capacity / (heads * sectors);
+ if (cylinders > 1024) {
+ heads = 255;
+ sectors = 63;
+ cylinders = (unsigned long)capacity / (heads * sectors);
+ /* if (cylinders > 1023)
+ cylinders = 1023; */
+ }
+
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+
+ return 0;
+}
+
+#if LINUX_VERSION_CODE < 0x020600
+static int
+qla1280_detect(Scsi_Host_Template *template)
+{
+ struct pci_device_id *id = &qla1280_pci_tbl[0];
+ struct pci_dev *pdev = NULL;
+ int num_hosts = 0;
+
+ if (sizeof(struct srb) > sizeof(Scsi_Pointer)) {
+ printk(KERN_WARNING
+ "qla1280: struct srb too big, aborting\n");
+ return 0;
+ }
+
+ if ((DMA_BIDIRECTIONAL != PCI_DMA_BIDIRECTIONAL) ||
+ (DMA_TO_DEVICE != PCI_DMA_TODEVICE) ||
+ (DMA_FROM_DEVICE != PCI_DMA_FROMDEVICE) ||
+ (DMA_NONE != PCI_DMA_NONE)) {
+ printk(KERN_WARNING
+ "qla1280: dma direction bits don't match\n");
+ return 0;
+ }
+
+#ifdef MODULE
+ /*
+ * If we are called as a module, the qla1280 pointer may not be null
+ * and it would point to our bootup string, just like on the lilo
+ * command line. IF not NULL, then process this config string with
+ * qla1280_setup
+ *
+ * Boot time Options
+ * To add options at boot time add a line to your lilo.conf file like:
+ * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
+ * which will result in the first four devices on the first two
+ * controllers being set to a tagged queue depth of 32.
+ */
+ if (qla1280)
+ qla1280_setup(qla1280);
+#endif
+
+ /* First Initialize QLA12160 on PCI Bus 1 Dev 2 */
+ while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
+ if (pdev->bus->number == 1 && PCI_SLOT(pdev->devfn) == 2) {
+ if (!qla1280_probe_one(pdev, id))
+ num_hosts++;
+ }
+ }
+
+ pdev = NULL;
+ /* Try and find each different type of adapter we support */
+ for (id = &qla1280_pci_tbl[0]; id->device; id++) {
+ while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
+ /*
+ * skip QLA12160 already initialized on
+ * PCI Bus 1 Dev 2 since we already initialized
+ * and presented it
+ */
+ if (id->device == PCI_DEVICE_ID_QLOGIC_ISP12160 &&
+ pdev->bus->number == 1 &&
+ PCI_SLOT(pdev->devfn) == 2)
+ continue;
+
+ if (!qla1280_probe_one(pdev, id))
+ num_hosts++;
+ }
+ }
+
+ return num_hosts;
+}
+
+/*
+ * This looks a bit ugly as we could just pass down host to
+ * qla1280_remove_one, but I want to keep qla1280_release purely a wrapper
+ * around pci_driver::remove as used from 2.6 onwards.
+ */
+static int
+qla1280_release(struct Scsi_Host *host)
+{
+ struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
+
+ qla1280_remove_one(ha->pdev);
+ return 0;
+}
+
+static int
+qla1280_biosparam_old(Disk * disk, kdev_t dev, int geom[])
+{
+ return qla1280_biosparam(disk->device, NULL, disk->capacity, geom);
+}
+#endif
+
+/**************************************************************************
+ * qla1280_intr_handler
+ * Handles the H/W interrupt
+ **************************************************************************/
+static irqreturn_t
+qla1280_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct scsi_qla_host *ha;
+ struct device_reg __iomem *reg;
+ u16 data;
+ int handled = 0;
+
+ ENTER_INTR ("qla1280_intr_handler");
+ ha = (struct scsi_qla_host *)dev_id;
+
+ spin_lock(HOST_LOCK);
+
+ ha->isr_count++;
+ reg = ha->iobase;
+
+ WRT_REG_WORD(&reg->ictrl, 0); /* disable our interrupt. */
+
+ data = qla1280_debounce_register(&reg->istatus);
+ /* Check for pending interrupts. */
+ if (data & RISC_INT) {
+ qla1280_isr(ha, &ha->done_q);
+ handled = 1;
+ }
+ if (!list_empty(&ha->done_q))
+ qla1280_done(ha);
+
+ spin_unlock(HOST_LOCK);
+
+ /* enable our interrupt. */
+ WRT_REG_WORD(&reg->ictrl, (ISP_EN_INT | ISP_EN_RISC));
+
+ LEAVE_INTR("qla1280_intr_handler");
+ return IRQ_RETVAL(handled);
+}
+
+
+static int
+qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
+{
+ uint8_t mr;
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ struct nvram *nv;
+ int status;
+
+ nv = &ha->nvram;
+
+ mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;
+
+ /* Set Target Parameters. */
+ mb[0] = MBC_SET_TARGET_PARAMETERS;
+ mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
+ mb[1] <<= 8;
+
+ mb[2] = (nv->bus[bus].target[target].parameter.c << 8);
+
+ if (IS_ISP1x160(ha)) {
+ mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;
+ mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8) |
+ nv->bus[bus].target[target].sync_period;
+ mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
+ nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
+ mr |= BIT_6;
+ } else {
+ mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8) |
+ nv->bus[bus].target[target].sync_period;
+ }
+
+ status = qla1280_mailbox_command(ha, mr, &mb[0]);
+
+ if (status)
+ printk(KERN_WARNING "scsi(%ld:%i:%i): "
+ "qla1280_set_target_parameters() failed\n",
+ ha->host_no, bus, target);
+ return status;
+}
+
+
+/**************************************************************************
+ * qla1280_slave_configure
+ *
+ * Description:
+ * Determines the queue depth for a given device. There are two ways
+ * a queue depth can be obtained for a tagged queueing device. One
+ * way is the default queue depth which is determined by whether
+ * If it is defined, then it is used
+ * as the default queue depth. Otherwise, we use either 4 or 8 as the
+ * default queue depth (dependent on the number of hardware SCBs).
+ **************************************************************************/
+static int
+qla1280_slave_configure(struct scsi_device *device)
+{
+ struct scsi_qla_host *ha;
+ int default_depth = 3;
+ int bus = device->channel;
+ int target = device->id;
+ int status = 0;
+ struct nvram *nv;
+ unsigned long flags;
+
+ ha = (struct scsi_qla_host *)device->host->hostdata;
+ nv = &ha->nvram;
+
+ if (qla1280_check_for_dead_scsi_bus(ha, bus))
+ return 1;
+
+ if (device->tagged_supported &&
+ (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {
+ scsi_adjust_queue_depth(device, MSG_ORDERED_TAG,
+ ha->bus_settings[bus].hiwat);
+ } else {
+ scsi_adjust_queue_depth(device, 0, default_depth);
+ }
+
+#if LINUX_VERSION_CODE > 0x020500
+ nv->bus[bus].target[target].parameter.f.enable_sync = device->sdtr;
+ nv->bus[bus].target[target].parameter.f.enable_wide = device->wdtr;
+ nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
+#endif
+
+ if (driver_setup.no_sync ||
+ (driver_setup.sync_mask &&
+ (~driver_setup.sync_mask & (1 << target))))
+ nv->bus[bus].target[target].parameter.f.enable_sync = 0;
+ if (driver_setup.no_wide ||
+ (driver_setup.wide_mask &&
+ (~driver_setup.wide_mask & (1 << target))))
+ nv->bus[bus].target[target].parameter.f.enable_wide = 0;
+ if (IS_ISP1x160(ha)) {
+ if (driver_setup.no_ppr ||
+ (driver_setup.ppr_mask &&
+ (~driver_setup.ppr_mask & (1 << target))))
+ nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
+ }
+
+ spin_lock_irqsave(HOST_LOCK, flags);
+ if (nv->bus[bus].target[target].parameter.f.enable_sync)
+ status = qla1280_set_target_parameters(ha, bus, target);
+ qla1280_get_target_parameters(ha, device);
+ spin_unlock_irqrestore(HOST_LOCK, flags);
+ return status;
+}
+
+#if LINUX_VERSION_CODE < 0x020545
+/**************************************************************************
+ * qla1280_select_queue_depth
+ *
+ * Sets the queue depth for each SCSI device hanging off the input
+ * host adapter. We use a queue depth of 2 for devices that do not
+ * support tagged queueing.
+ **************************************************************************/
+static void
+qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q)
+{
+ struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
+ struct scsi_device *sdev;
+
+ ENTER("qla1280_select_queue_depth");
+ for (sdev = sdev_q; sdev; sdev = sdev->next)
+ if (sdev->host == host)
+ qla1280_slave_configure(sdev);
+
+ if (sdev_q)
+ qla1280_check_for_dead_scsi_bus(ha, sdev_q->channel);
+ LEAVE("qla1280_select_queue_depth");
+}
+#endif
+
+/*
+ * qla1280_done
+ * Process completed commands.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * done_q = done queue.
+ */
+static void
+qla1280_done(struct scsi_qla_host *ha)
+{
+ struct srb *sp;
+ struct list_head *done_q;
+ int bus, target, lun;
+ struct scsi_cmnd *cmd;
+
+ ENTER("qla1280_done");
+
+ done_q = &ha->done_q;
+
+ while (!list_empty(done_q)) {
+ sp = list_entry(done_q->next, struct srb, list);
+
+ list_del(&sp->list);
+
+ cmd = sp->cmd;
+ bus = SCSI_BUS_32(cmd);
+ target = SCSI_TCN_32(cmd);
+ lun = SCSI_LUN_32(cmd);
+
+ switch ((CMD_RESULT(cmd) >> 16)) {
+ case DID_RESET:
+ /* Issue marker command. */
+ qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
+ break;
+ case DID_ABORT:
+ sp->flags &= ~SRB_ABORT_PENDING;
+ sp->flags |= SRB_ABORTED;
+ if (sp->flags & SRB_TIMEOUT)
+ CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16;
+ break;
+ default:
+ break;
+ }
+
+ /* Release memory used for this I/O */
+ if (cmd->use_sg) {
+ pci_unmap_sg(ha->pdev, cmd->request_buffer,
+ cmd->use_sg, cmd->sc_data_direction);
+ } else if (cmd->request_bufflen) {
+ pci_unmap_single(ha->pdev, sp->saved_dma_handle,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ }
+
+ /* Call the mid-level driver interrupt handler */
+ CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
+ ha->actthreads--;
+
+#if LINUX_VERSION_CODE < 0x020500
+ if (cmd->cmnd[0] == INQUIRY)
+ qla1280_get_target_options(cmd, ha);
+#endif
+ (*(cmd)->scsi_done)(cmd);
+
+ if(sp->wait != NULL)
+ complete(sp->wait);
+ }
+ LEAVE("qla1280_done");
+}
+
+/*
+ * Translates a ISP error to a Linux SCSI error
+ */
+static int
+qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
+{
+ int host_status = DID_ERROR;
+ uint16_t comp_status = le16_to_cpu(sts->comp_status);
+ uint16_t state_flags = le16_to_cpu(sts->state_flags);
+ uint16_t residual_length = le16_to_cpu(sts->residual_length);
+ uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
+#if DEBUG_QLA1280_INTR
+ static char *reason[] = {
+ "DID_OK",
+ "DID_NO_CONNECT",
+ "DID_BUS_BUSY",
+ "DID_TIME_OUT",
+ "DID_BAD_TARGET",
+ "DID_ABORT",
+ "DID_PARITY",
+ "DID_ERROR",
+ "DID_RESET",
+ "DID_BAD_INTR"
+ };
+#endif /* DEBUG_QLA1280_INTR */
+
+ ENTER("qla1280_return_status");
+
+#if DEBUG_QLA1280_INTR
+ /*
+ dprintk(1, "qla1280_return_status: compl status = 0x%04x\n",
+ comp_status);
+ */
+#endif
+
+ switch (comp_status) {
+ case CS_COMPLETE:
+ host_status = DID_OK;
+ break;
+
+ case CS_INCOMPLETE:
+ if (!(state_flags & SF_GOT_BUS))
+ host_status = DID_NO_CONNECT;
+ else if (!(state_flags & SF_GOT_TARGET))
+ host_status = DID_BAD_TARGET;
+ else if (!(state_flags & SF_SENT_CDB))
+ host_status = DID_ERROR;
+ else if (!(state_flags & SF_TRANSFERRED_DATA))
+ host_status = DID_ERROR;
+ else if (!(state_flags & SF_GOT_STATUS))
+ host_status = DID_ERROR;
+ else if (!(state_flags & SF_GOT_SENSE))
+ host_status = DID_ERROR;
+ break;
+
+ case CS_RESET:
+ host_status = DID_RESET;
+ break;
+
+ case CS_ABORTED:
+ host_status = DID_ABORT;
+ break;
+
+ case CS_TIMEOUT:
+ host_status = DID_TIME_OUT;
+ break;
+
+ case CS_DATA_OVERRUN:
+ dprintk(2, "Data overrun 0x%x\n", residual_length);
+ dprintk(2, "qla1280_isr: response packet data\n");
+ qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE);
+ host_status = DID_ERROR;
+ break;
+
+ case CS_DATA_UNDERRUN:
+ if ((cp->request_bufflen - residual_length) <
+ cp->underflow) {
+ printk(KERN_WARNING
+ "scsi: Underflow detected - retrying "
+ "command.\n");
+ host_status = DID_ERROR;
+ } else
+ host_status = DID_OK;
+ break;
+
+ default:
+ host_status = DID_ERROR;
+ break;
+ }
+
+#if DEBUG_QLA1280_INTR
+ dprintk(1, "qla1280 ISP status: host status (%s) scsi status %x\n",
+ reason[host_status], scsi_status);
+#endif
+
+ LEAVE("qla1280_return_status");
+
+ return (scsi_status & 0xff) | (host_status << 16);
+}
+
+/****************************************************************************/
+/* QLogic ISP1280 Hardware Support Functions. */
+/****************************************************************************/
+
+ /*
+ * qla2100_enable_intrs
+ * qla2100_disable_intrs
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * None
+ */
+static inline void
+qla1280_enable_intrs(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg;
+
+ reg = ha->iobase;
+ /* enable risc and host interrupts */
+ WRT_REG_WORD(&reg->ictrl, (ISP_EN_INT | ISP_EN_RISC));
+ RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
+ ha->flags.ints_enabled = 1;
+}
+
+static inline void
+qla1280_disable_intrs(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg;
+
+ reg = ha->iobase;
+ /* disable risc and host interrupts */
+ WRT_REG_WORD(&reg->ictrl, 0);
+ RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
+ ha->flags.ints_enabled = 0;
+}
+
+/*
+ * qla1280_initialize_adapter
+ * Initialize board.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * 0 = success
+ */
+static int __devinit
+qla1280_initialize_adapter(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg;
+ int status;
+ int bus;
+#if LINUX_VERSION_CODE > 0x020500
+ unsigned long flags;
+#endif
+
+ ENTER("qla1280_initialize_adapter");
+
+ /* Clear adapter flags. */
+ ha->flags.online = 0;
+ ha->flags.disable_host_adapter = 0;
+ ha->flags.reset_active = 0;
+ ha->flags.abort_isp_active = 0;
+
+ ha->flags.ints_enabled = 0;
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
+ if (ia64_platform_is("sn2")) {
+ printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
+ "dual channel lockup workaround\n", ha->host_no);
+ ha->flags.use_pci_vchannel = 1;
+ driver_setup.no_nvram = 1;
+ }
+#endif
+
+ /* TODO: implement support for the 1040 nvram format */
+ if (IS_ISP1040(ha))
+ driver_setup.no_nvram = 1;
+
+ dprintk(1, "Configure PCI space for adapter...\n");
+
+ reg = ha->iobase;
+
+ /* Insure mailbox registers are free. */
+ WRT_REG_WORD(&reg->semaphore, 0);
+ WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
+ WRT_REG_WORD(&reg->host_cmd, HC_CLR_HOST_INT);
+ RD_REG_WORD(&reg->host_cmd);
+
+ if (qla1280_read_nvram(ha)) {
+ dprintk(2, "qla1280_initialize_adapter: failed to read "
+ "NVRAM\n");
+ }
+
+#if LINUX_VERSION_CODE >= 0x020500
+ /*
+ * It's necessary to grab the spin here as qla1280_mailbox_command
+ * needs to be able to drop the lock unconditionally to wait
+ * for completion.
+ * In 2.4 ->detect is called with the io_request_lock held.
+ */
+ spin_lock_irqsave(HOST_LOCK, flags);
+#endif
+
+ status = qla1280_load_firmware(ha);
+ if (status) {
+ printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n",
+ ha->host_no);
+ goto out;
+ }
+
+ /* Setup adapter based on NVRAM parameters. */
+ dprintk(1, "scsi(%ld): Configure NVRAM parameters\n", ha->host_no);
+ qla1280_nvram_config(ha);
+
+ if (ha->flags.disable_host_adapter) {
+ status = 1;
+ goto out;
+ }
+
+ status = qla1280_init_rings(ha);
+ if (status)
+ goto out;
+
+ /* Issue SCSI reset, if we can't reset twice then bus is dead */
+ for (bus = 0; bus < ha->ports; bus++) {
+ if (!ha->bus_settings[bus].disable_scsi_reset &&
+ qla1280_bus_reset(ha, bus) &&
+ qla1280_bus_reset(ha, bus))
+ ha->bus_settings[bus].scsi_bus_dead = 1;
+ }
+
+ ha->flags.online = 1;
+ out:
+#if LINUX_VERSION_CODE >= 0x020500
+ spin_unlock_irqrestore(HOST_LOCK, flags);
+#endif
+ if (status)
+ dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n");
+
+ LEAVE("qla1280_initialize_adapter");
+ return status;
+}
+
+
+/*
+ * ISP Firmware Test
+ * Checks if present version of RISC firmware is older than
+ * driver firmware.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * 0 = firmware does not need to be loaded.
+ */
+static int
+qla1280_isp_firmware(struct scsi_qla_host *ha)
+{
+ struct nvram *nv = (struct nvram *) ha->response_ring;
+ int status = 0; /* dg 2/27 always loads RISC */
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+
+ ENTER("qla1280_isp_firmware");
+
+ dprintk(1, "scsi(%li): Determining if RISC is loaded\n", ha->host_no);
+
+ /* Bad NVRAM data, load RISC code. */
+ if (!ha->nvram_valid) {
+ ha->flags.disable_risc_code_load = 0;
+ } else
+ ha->flags.disable_risc_code_load =
+ nv->cntr_flags_1.disable_loading_risc_code;
+
+ if (ha->flags.disable_risc_code_load) {
+ dprintk(3, "qla1280_isp_firmware: Telling RISC to verify "
+ "checksum of loaded BIOS code.\n");
+
+ /* Verify checksum of loaded RISC code. */
+ mb[0] = MBC_VERIFY_CHECKSUM;
+ /* mb[1] = ql12_risc_code_addr01; */
+ mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
+
+ if (!(status =
+ qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]))) {
+ /* Start firmware execution. */
+ dprintk(3, "qla1280_isp_firmware: Startng F/W "
+ "execution.\n");
+
+ mb[0] = MBC_EXECUTE_FIRMWARE;
+ /* mb[1] = ql12_risc_code_addr01; */
+ mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
+ qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+ } else
+ printk(KERN_INFO "qla1280: RISC checksum failed.\n");
+ } else {
+ dprintk(1, "qla1280: NVRAM configured to load RISC load.\n");
+ status = 1;
+ }
+
+ if (status)
+ dprintk(2, "qla1280_isp_firmware: **** Load RISC code ****\n");
+
+ LEAVE("qla1280_isp_firmware");
+ return status;
+}
+
+/*
+ * Chip diagnostics
+ * Test chip for proper operation.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * 0 = success.
+ */
+static int
+qla1280_chip_diag(struct scsi_qla_host *ha)
+{
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ struct device_reg __iomem *reg = ha->iobase;
+ int status = 0;
+ int cnt;
+ uint16_t data;
+ dprintk(3, "qla1280_chip_diag: testing device at 0x%p \n", &reg->id_l);
+
+ dprintk(1, "scsi(%ld): Verifying chip\n", ha->host_no);
+
+ /* Soft reset chip and wait for it to finish. */
+ WRT_REG_WORD(&reg->ictrl, ISP_RESET);
+
+ /*
+ * We can't do a traditional PCI write flush here by reading
+ * back the register. The card will not respond once the reset
+ * is in action and we end up with a machine check exception
+ * instead. Nothing to do but wait and hope for the best.
+ * A portable pci_write_flush(pdev) call would be very useful here.
+ */
+ udelay(20);
+ data = qla1280_debounce_register(&reg->ictrl);
+ /*
+ * Yet another QLogic gem ;-(
+ */
+ for (cnt = 1000000; cnt && data & ISP_RESET; cnt--) {
+ udelay(5);
+ data = RD_REG_WORD(&reg->ictrl);
+ }
+
+ if (!cnt)
+ goto fail;
+
+ /* Reset register cleared by chip reset. */
+ dprintk(3, "qla1280_chip_diag: reset register cleared by chip reset\n");
+
+ WRT_REG_WORD(&reg->cfg_1, 0);
+
+ /* Reset RISC and disable BIOS which
+ allows RISC to execute out of RAM. */
+ WRT_REG_WORD(&reg->host_cmd, HC_RESET_RISC |
+ HC_RELEASE_RISC | HC_DISABLE_BIOS);
+
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+ data = qla1280_debounce_register(&reg->mailbox0);
+
+ /*
+ * I *LOVE* this code!
+ */
+ for (cnt = 1000000; cnt && data == MBS_BUSY; cnt--) {
+ udelay(5);
+ data = RD_REG_WORD(&reg->mailbox0);
+ }
+
+ if (!cnt)
+ goto fail;
+
+ /* Check product ID of chip */
+ dprintk(3, "qla1280_chip_diag: Checking product ID of chip\n");
+
+ if (RD_REG_WORD(&reg->mailbox1) != PROD_ID_1 ||
+ (RD_REG_WORD(&reg->mailbox2) != PROD_ID_2 &&
+ RD_REG_WORD(&reg->mailbox2) != PROD_ID_2a) ||
+ RD_REG_WORD(&reg->mailbox3) != PROD_ID_3 ||
+ RD_REG_WORD(&reg->mailbox4) != PROD_ID_4) {
+ printk(KERN_INFO "qla1280: Wrong product ID = "
+ "0x%x,0x%x,0x%x,0x%x\n",
+ RD_REG_WORD(&reg->mailbox1),
+ RD_REG_WORD(&reg->mailbox2),
+ RD_REG_WORD(&reg->mailbox3),
+ RD_REG_WORD(&reg->mailbox4));
+ goto fail;
+ }
+
+ /*
+ * Enable ints early!!!
+ */
+ qla1280_enable_intrs(ha);
+
+ dprintk(1, "qla1280_chip_diag: Checking mailboxes of chip\n");
+ /* Wrap Incoming Mailboxes Test. */
+ mb[0] = MBC_MAILBOX_REGISTER_TEST;
+ mb[1] = 0xAAAA;
+ mb[2] = 0x5555;
+ mb[3] = 0xAA55;
+ mb[4] = 0x55AA;
+ mb[5] = 0xA5A5;
+ mb[6] = 0x5A5A;
+ mb[7] = 0x2525;
+
+ status = qla1280_mailbox_command(ha, 0xff, mb);
+ if (status)
+ goto fail;
+
+ if (mb[1] != 0xAAAA || mb[2] != 0x5555 || mb[3] != 0xAA55 ||
+ mb[4] != 0x55AA || mb[5] != 0xA5A5 || mb[6] != 0x5A5A ||
+ mb[7] != 0x2525) {
+ printk(KERN_INFO "qla1280: Failed mbox check\n");
+ goto fail;
+ }
+
+ dprintk(3, "qla1280_chip_diag: exiting normally\n");
+ return 0;
+ fail:
+ dprintk(2, "qla1280_chip_diag: **** FAILED ****\n");
+ return status;
+}
+
+static int
+qla1280_load_firmware_pio(struct scsi_qla_host *ha)
+{
+ uint16_t risc_address, *risc_code_address, risc_code_size;
+ uint16_t mb[MAILBOX_REGISTER_COUNT], i;
+ int err;
+
+ /* Load RISC code. */
+ risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
+ risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
+ risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
+
+ for (i = 0; i < risc_code_size; i++) {
+ mb[0] = MBC_WRITE_RAM_WORD;
+ mb[1] = risc_address + i;
+ mb[2] = risc_code_address[i];
+
+ err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
+ if (err) {
+ printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
+ ha->host_no);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+#define DUMP_IT_BACK 0 /* for debug of RISC loading */
+static int
+qla1280_load_firmware_dma(struct scsi_qla_host *ha)
+{
+ uint16_t risc_address, *risc_code_address, risc_code_size;
+ uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
+ int err = 0, num, i;
+#if DUMP_IT_BACK
+ uint8_t *sp, *tbuf;
+ dma_addr_t p_tbuf;
+
+ tbuf = pci_alloc_consistent(ha->pdev, 8000, &p_tbuf);
+ if (!tbuf)
+ return -ENOMEM;
+#endif
+
+ /* Load RISC code. */
+ risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
+ risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
+ risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
+
+ dprintk(1, "%s: DMA RISC code (%i) words\n",
+ __FUNCTION__, risc_code_size);
+
+ num = 0;
+ while (risc_code_size > 0) {
+ int warn __attribute__((unused)) = 0;
+
+ cnt = 2000 >> 1;
+
+ if (cnt > risc_code_size)
+ cnt = risc_code_size;
+
+ dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p),"
+ "%d,%d(0x%x)\n",
+ risc_code_address, cnt, num, risc_address);
+ for(i = 0; i < cnt; i++)
+ ((uint16_t *)ha->request_ring)[i] =
+ cpu_to_le16(risc_code_address[i]);
+
+ mb[0] = MBC_LOAD_RAM;
+ mb[1] = risc_address;
+ mb[4] = cnt;
+ mb[3] = ha->request_dma & 0xffff;
+ mb[2] = (ha->request_dma >> 16) & 0xffff;
+ mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
+ mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
+ dprintk(2, "%s: op=%d 0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n",
+ __FUNCTION__, mb[0],
+ (void *)(long)ha->request_dma,
+ mb[6], mb[7], mb[2], mb[3]);
+ err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
+ BIT_1 | BIT_0, mb);
+ if (err) {
+ printk(KERN_ERR "scsi(%li): Failed to load partial "
+ "segment of f\n", ha->host_no);
+ goto out;
+ }
+
+#if DUMP_IT_BACK
+ mb[0] = MBC_DUMP_RAM;
+ mb[1] = risc_address;
+ mb[4] = cnt;
+ mb[3] = p_tbuf & 0xffff;
+ mb[2] = (p_tbuf >> 16) & 0xffff;
+ mb[7] = pci_dma_hi32(p_tbuf) & 0xffff;
+ mb[6] = pci_dma_hi32(p_tbuf) >> 16;
+
+ err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
+ BIT_1 | BIT_0, mb);
+ if (err) {
+ printk(KERN_ERR
+ "Failed to dump partial segment of f/w\n");
+ goto out;
+ }
+ sp = (uint8_t *)ha->request_ring;
+ for (i = 0; i < (cnt << 1); i++) {
+ if (tbuf[i] != sp[i] && warn++ < 10) {
+ printk(KERN_ERR "%s: FW compare error @ "
+ "byte(0x%x) loop#=%x\n",
+ __FUNCTION__, i, num);
+ printk(KERN_ERR "%s: FWbyte=%x "
+ "FWfromChip=%x\n",
+ __FUNCTION__, sp[i], tbuf[i]);
+ /*break; */
+ }
+ }
+#endif
+ risc_address += cnt;
+ risc_code_size = risc_code_size - cnt;
+ risc_code_address = risc_code_address + cnt;
+ num++;
+ }
+
+ out:
+#if DUMP_IT_BACK
+ pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
+#endif
+ return err;
+}
+
+static int
+qla1280_start_firmware(struct scsi_qla_host *ha)
+{
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ int err;
+
+ dprintk(1, "%s: Verifying checksum of loaded RISC code.\n",
+ __FUNCTION__);
+
+ /* Verify checksum of loaded RISC code. */
+ mb[0] = MBC_VERIFY_CHECKSUM;
+ /* mb[1] = ql12_risc_code_addr01; */
+ mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
+ err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
+ if (err) {
+ printk(KERN_ERR "scsi(%li): Failed checksum\n", ha->host_no);
+ return err;
+ }
+
+ /* Start firmware execution. */
+ dprintk(1, "%s: start firmware running.\n", __FUNCTION__);
+ mb[0] = MBC_EXECUTE_FIRMWARE;
+ mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
+ err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+ if (err) {
+ printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
+ ha->host_no);
+ }
+
+ return err;
+}
+
+static int
+qla1280_load_firmware(struct scsi_qla_host *ha)
+{
+ int err = -ENODEV;
+
+ /* If firmware needs to be loaded */
+ if (!qla1280_isp_firmware(ha)) {
+ printk(KERN_ERR "scsi(%li): isp_firmware() failed!\n",
+ ha->host_no);
+ goto out;
+ }
+
+ err = qla1280_chip_diag(ha);
+ if (err)
+ goto out;
+ if (IS_ISP1040(ha))
+ err = qla1280_load_firmware_pio(ha);
+ else
+ err = qla1280_load_firmware_dma(ha);
+ if (err)
+ goto out;
+ err = qla1280_start_firmware(ha);
+ out:
+ return err;
+}
+
+/*
+ * Initialize rings
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * ha->request_ring = request ring virtual address
+ * ha->response_ring = response ring virtual address
+ * ha->request_dma = request ring physical address
+ * ha->response_dma = response ring physical address
+ *
+ * Returns:
+ * 0 = success.
+ */
+static int
+qla1280_init_rings(struct scsi_qla_host *ha)
+{
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ int status = 0;
+
+ ENTER("qla1280_init_rings");
+
+ /* Clear outstanding commands array. */
+ memset(ha->outstanding_cmds, 0,
+ sizeof(struct srb *) * MAX_OUTSTANDING_COMMANDS);
+
+ /* Initialize request queue. */
+ ha->request_ring_ptr = ha->request_ring;
+ ha->req_ring_index = 0;
+ ha->req_q_cnt = REQUEST_ENTRY_CNT;
+ /* mb[0] = MBC_INIT_REQUEST_QUEUE; */
+ mb[0] = MBC_INIT_REQUEST_QUEUE_A64;
+ mb[1] = REQUEST_ENTRY_CNT;
+ mb[3] = ha->request_dma & 0xffff;
+ mb[2] = (ha->request_dma >> 16) & 0xffff;
+ mb[4] = 0;
+ mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
+ mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
+ if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 |
+ BIT_3 | BIT_2 | BIT_1 | BIT_0,
+ &mb[0]))) {
+ /* Initialize response queue. */
+ ha->response_ring_ptr = ha->response_ring;
+ ha->rsp_ring_index = 0;
+ /* mb[0] = MBC_INIT_RESPONSE_QUEUE; */
+ mb[0] = MBC_INIT_RESPONSE_QUEUE_A64;
+ mb[1] = RESPONSE_ENTRY_CNT;
+ mb[3] = ha->response_dma & 0xffff;
+ mb[2] = (ha->response_dma >> 16) & 0xffff;
+ mb[5] = 0;
+ mb[7] = pci_dma_hi32(ha->response_dma) & 0xffff;
+ mb[6] = pci_dma_hi32(ha->response_dma) >> 16;
+ status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 |
+ BIT_3 | BIT_2 | BIT_1 | BIT_0,
+ &mb[0]);
+ }
+
+ if (status)
+ dprintk(2, "qla1280_init_rings: **** FAILED ****\n");
+
+ LEAVE("qla1280_init_rings");
+ return status;
+}
+
+static void
+qla1280_print_settings(struct nvram *nv)
+{
+ dprintk(1, "qla1280 : initiator scsi id bus[0]=%d\n",
+ nv->bus[0].config_1.initiator_id);
+ dprintk(1, "qla1280 : initiator scsi id bus[1]=%d\n",
+ nv->bus[1].config_1.initiator_id);
+
+ dprintk(1, "qla1280 : bus reset delay[0]=%d\n",
+ nv->bus[0].bus_reset_delay);
+ dprintk(1, "qla1280 : bus reset delay[1]=%d\n",
+ nv->bus[1].bus_reset_delay);
+
+ dprintk(1, "qla1280 : retry count[0]=%d\n", nv->bus[0].retry_count);
+ dprintk(1, "qla1280 : retry delay[0]=%d\n", nv->bus[0].retry_delay);
+ dprintk(1, "qla1280 : retry count[1]=%d\n", nv->bus[1].retry_count);
+ dprintk(1, "qla1280 : retry delay[1]=%d\n", nv->bus[1].retry_delay);
+
+ dprintk(1, "qla1280 : async data setup time[0]=%d\n",
+ nv->bus[0].config_2.async_data_setup_time);
+ dprintk(1, "qla1280 : async data setup time[1]=%d\n",
+ nv->bus[1].config_2.async_data_setup_time);
+
+ dprintk(1, "qla1280 : req/ack active negation[0]=%d\n",
+ nv->bus[0].config_2.req_ack_active_negation);
+ dprintk(1, "qla1280 : req/ack active negation[1]=%d\n",
+ nv->bus[1].config_2.req_ack_active_negation);
+
+ dprintk(1, "qla1280 : data line active negation[0]=%d\n",
+ nv->bus[0].config_2.data_line_active_negation);
+ dprintk(1, "qla1280 : data line active negation[1]=%d\n",
+ nv->bus[1].config_2.data_line_active_negation);
+
+ dprintk(1, "qla1280 : disable loading risc code=%d\n",
+ nv->cntr_flags_1.disable_loading_risc_code);
+
+ dprintk(1, "qla1280 : enable 64bit addressing=%d\n",
+ nv->cntr_flags_1.enable_64bit_addressing);
+
+ dprintk(1, "qla1280 : selection timeout limit[0]=%d\n",
+ nv->bus[0].selection_timeout);
+ dprintk(1, "qla1280 : selection timeout limit[1]=%d\n",
+ nv->bus[1].selection_timeout);
+
+ dprintk(1, "qla1280 : max queue depth[0]=%d\n",
+ nv->bus[0].max_queue_depth);
+ dprintk(1, "qla1280 : max queue depth[1]=%d\n",
+ nv->bus[1].max_queue_depth);
+}
+
+static void
+qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
+{
+ struct nvram *nv = &ha->nvram;
+
+ nv->bus[bus].target[target].parameter.f.renegotiate_on_error = 1;
+ nv->bus[bus].target[target].parameter.f.auto_request_sense = 1;
+ nv->bus[bus].target[target].parameter.f.tag_queuing = 1;
+ nv->bus[bus].target[target].parameter.f.enable_sync = 1;
+#if 1 /* Some SCSI Processors do not seem to like this */
+ nv->bus[bus].target[target].parameter.f.enable_wide = 1;
+#endif
+ nv->bus[bus].target[target].parameter.f.parity_checking = 1;
+ nv->bus[bus].target[target].parameter.f.disconnect_allowed = 1;
+ nv->bus[bus].target[target].execution_throttle =
+ nv->bus[bus].max_queue_depth - 1;
+
+ if (IS_ISP1x160(ha)) {
+ nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
+ nv->bus[bus].target[target].flags.flags1x160.sync_offset = 0x0e;
+ nv->bus[bus].target[target].sync_period = 9;
+ nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
+ nv->bus[bus].target[target].ppr_1x160.flags.ppr_options = 2;
+ nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width = 1;
+ } else {
+ nv->bus[bus].target[target].flags.flags1x80.device_enable = 1;
+ nv->bus[bus].target[target].flags.flags1x80.sync_offset = 12;
+ nv->bus[bus].target[target].sync_period = 10;
+ }
+}
+
+static void
+qla1280_set_defaults(struct scsi_qla_host *ha)
+{
+ struct nvram *nv = &ha->nvram;
+ int bus, target;
+
+ dprintk(1, "Using defaults for NVRAM: \n");
+ memset(nv, 0, sizeof(struct nvram));
+
+ /* nv->cntr_flags_1.disable_loading_risc_code = 1; */
+ nv->firmware_feature.f.enable_fast_posting = 1;
+ nv->firmware_feature.f.disable_synchronous_backoff = 1;
+ nv->termination.f.scsi_bus_0_control = 3;
+ nv->termination.f.scsi_bus_1_control = 3;
+ nv->termination.f.auto_term_support = 1;
+
+ /*
+ * Set default FIFO magic - What appropriate values would be here
+ * is unknown. This is what I have found testing with 12160s.
+ *
+ * Now, I would love the magic decoder ring for this one, the
+ * header file provided by QLogic seems to be bogus or incomplete
+ * at best.
+ */
+ nv->isp_config.c = ISP_CFG1_BENAB|ISP_CFG1_F128;
+ if (IS_ISP1x160(ha))
+ nv->isp_parameter = 0x01; /* fast memory enable */
+
+ for (bus = 0; bus < MAX_BUSES; bus++) {
+ nv->bus[bus].config_1.initiator_id = 7;
+ nv->bus[bus].config_2.req_ack_active_negation = 1;
+ nv->bus[bus].config_2.data_line_active_negation = 1;
+ nv->bus[bus].selection_timeout = 250;
+ nv->bus[bus].max_queue_depth = 256;
+
+ if (IS_ISP1040(ha)) {
+ nv->bus[bus].bus_reset_delay = 3;
+ nv->bus[bus].config_2.async_data_setup_time = 6;
+ nv->bus[bus].retry_delay = 1;
+ } else {
+ nv->bus[bus].bus_reset_delay = 5;
+ nv->bus[bus].config_2.async_data_setup_time = 8;
+ }
+
+ for (target = 0; target < MAX_TARGETS; target++)
+ qla1280_set_target_defaults(ha, bus, target);
+ }
+}
+
+static int
+qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
+{
+ struct nvram *nv = &ha->nvram;
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ int status, lun;
+
+ /* Set Target Parameters. */
+ mb[0] = MBC_SET_TARGET_PARAMETERS;
+ mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
+ mb[1] <<= 8;
+
+ /*
+ * Do not enable wide, sync, and ppr for the initial
+ * INQUIRY run. We enable this later if we determine
+ * the target actually supports it.
+ */
+ nv->bus[bus].target[target].parameter.f.
+ auto_request_sense = 1;
+ nv->bus[bus].target[target].parameter.f.
+ stop_queue_on_check = 0;
+
+ if (IS_ISP1x160(ha))
+ nv->bus[bus].target[target].ppr_1x160.
+ flags.enable_ppr = 0;
+
+ /*
+ * No sync, wide, etc. while probing
+ */
+ mb[2] = (nv->bus[bus].target[target].parameter.c << 8) &
+ ~(TP_SYNC /*| TP_WIDE | TP_PPR*/);
+
+ if (IS_ISP1x160(ha))
+ mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
+ else
+ mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
+ mb[3] |= nv->bus[bus].target[target].sync_period;
+
+ status = qla1280_mailbox_command(ha, BIT_3 | BIT_2 | BIT_1 | BIT_0, &mb[0]);
+
+ /* Save Tag queuing enable flag. */
+ mb[0] = BIT_0 << target;
+ if (nv->bus[bus].target[target].parameter.f.tag_queuing)
+ ha->bus_settings[bus].qtag_enables |= mb[0];
+
+ /* Save Device enable flag. */
+ if (IS_ISP1x160(ha)) {
+ if (nv->bus[bus].target[target].flags.flags1x160.device_enable)
+ ha->bus_settings[bus].device_enables |= mb[0];
+ ha->bus_settings[bus].lun_disables |= 0;
+ } else {
+ if (nv->bus[bus].target[target].flags.flags1x80.device_enable)
+ ha->bus_settings[bus].device_enables |= mb[0];
+ /* Save LUN disable flag. */
+ if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)
+ ha->bus_settings[bus].lun_disables |= mb[0];
+ }
+
+ /* Set Device Queue Parameters. */
+ for (lun = 0; lun < MAX_LUNS; lun++) {
+ mb[0] = MBC_SET_DEVICE_QUEUE;
+ mb[1] = (uint16_t)(bus ? target | BIT_7 : target);
+ mb[1] = mb[1] << 8 | lun;
+ mb[2] = nv->bus[bus].max_queue_depth;
+ mb[3] = nv->bus[bus].target[target].execution_throttle;
+ status |= qla1280_mailbox_command(ha, 0x0f, &mb[0]);
+ }
+
+ return status;
+}
+
+static int
+qla1280_config_bus(struct scsi_qla_host *ha, int bus)
+{
+ struct nvram *nv = &ha->nvram;
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ int target, status;
+
+ /* SCSI Reset Disable. */
+ ha->bus_settings[bus].disable_scsi_reset =
+ nv->bus[bus].config_1.scsi_reset_disable;
+
+ /* Initiator ID. */
+ ha->bus_settings[bus].id = nv->bus[bus].config_1.initiator_id;
+ mb[0] = MBC_SET_INITIATOR_ID;
+ mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 :
+ ha->bus_settings[bus].id;
+ status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+
+ /* Reset Delay. */
+ ha->bus_settings[bus].bus_reset_delay =
+ nv->bus[bus].bus_reset_delay;
+
+ /* Command queue depth per device. */
+ ha->bus_settings[bus].hiwat = nv->bus[bus].max_queue_depth - 1;
+
+ /* Set target parameters. */
+ for (target = 0; target < MAX_TARGETS; target++)
+ status |= qla1280_config_target(ha, bus, target);
+
+ return status;
+}
+
+static int
+qla1280_nvram_config(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+ struct nvram *nv = &ha->nvram;
+ int bus, target, status = 0;
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ uint16_t mask;
+
+ ENTER("qla1280_nvram_config");
+
+ if (ha->nvram_valid) {
+ /* Always force AUTO sense for LINUX SCSI */
+ for (bus = 0; bus < MAX_BUSES; bus++)
+ for (target = 0; target < MAX_TARGETS; target++) {
+ nv->bus[bus].target[target].parameter.f.
+ auto_request_sense = 1;
+ }
+ } else {
+ qla1280_set_defaults(ha);
+ }
+
+ qla1280_print_settings(nv);
+
+ /* Disable RISC load of firmware. */
+ ha->flags.disable_risc_code_load =
+ nv->cntr_flags_1.disable_loading_risc_code;
+
+ if (IS_ISP1040(ha)) {
+ uint16_t hwrev, cfg1, cdma_conf, ddma_conf;
+
+ hwrev = RD_REG_WORD(&reg->cfg_0) & ISP_CFG0_HWMSK;
+
+ cfg1 = RD_REG_WORD(&reg->cfg_1);
+ cdma_conf = RD_REG_WORD(&reg->cdma_cfg);
+ ddma_conf = RD_REG_WORD(&reg->ddma_cfg);
+
+ /* Busted fifo, says mjacob. */
+ if (hwrev == ISP_CFG0_1040A)
+ WRT_REG_WORD(&reg->cfg_1, cfg1 | ISP_CFG1_F64);
+ else
+ WRT_REG_WORD(&reg->cfg_1, cfg1 | ISP_CFG1_F64 | ISP_CFG1_BENAB);
+
+ WRT_REG_WORD(&reg->cdma_cfg, cdma_conf | CDMA_CONF_BENAB);
+ WRT_REG_WORD(&reg->ddma_cfg, cdma_conf | DDMA_CONF_BENAB);
+ } else {
+ /* Set ISP hardware DMA burst */
+ mb[0] = nv->isp_config.c;
+ /* Enable DMA arbitration on dual channel controllers */
+ if (ha->ports > 1)
+ mb[0] |= BIT_13;
+ WRT_REG_WORD(&reg->cfg_1, mb[0]);
+
+ /* Set SCSI termination. */
+ WRT_REG_WORD(&reg->gpio_enable, (BIT_3 + BIT_2 + BIT_1 + BIT_0));
+ mb[0] = nv->termination.c & (BIT_3 + BIT_2 + BIT_1 + BIT_0);
+ WRT_REG_WORD(&reg->gpio_data, mb[0]);
+ }
+
+ /* ISP parameter word. */
+ mb[0] = MBC_SET_SYSTEM_PARAMETER;
+ mb[1] = nv->isp_parameter;
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+
+ if (IS_ISP1x40(ha)) {
+ /* clock rate - for qla1240 and older, only */
+ mb[0] = MBC_SET_CLOCK_RATE;
+ mb[1] = 40;
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
+ }
+
+ /* Firmware feature word. */
+ mb[0] = MBC_SET_FIRMWARE_FEATURES;
+ mask = BIT_5 | BIT_1 | BIT_0;
+ mb[1] = le16_to_cpu(nv->firmware_feature.w) & (mask);
+#if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2)
+ if (ia64_platform_is("sn2")) {
+ printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
+ "workaround\n", ha->host_no);
+ mb[1] |= BIT_9;
+ }
+#endif
+ status |= qla1280_mailbox_command(ha, mask, &mb[0]);
+
+ /* Retry count and delay. */
+ mb[0] = MBC_SET_RETRY_COUNT;
+ mb[1] = nv->bus[0].retry_count;
+ mb[2] = nv->bus[0].retry_delay;
+ mb[6] = nv->bus[1].retry_count;
+ mb[7] = nv->bus[1].retry_delay;
+ status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 |
+ BIT_1 | BIT_0, &mb[0]);
+
+ /* ASYNC data setup time. */
+ mb[0] = MBC_SET_ASYNC_DATA_SETUP;
+ mb[1] = nv->bus[0].config_2.async_data_setup_time;
+ mb[2] = nv->bus[1].config_2.async_data_setup_time;
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+
+ /* Active negation states. */
+ mb[0] = MBC_SET_ACTIVE_NEGATION;
+ mb[1] = 0;
+ if (nv->bus[0].config_2.req_ack_active_negation)
+ mb[1] |= BIT_5;
+ if (nv->bus[0].config_2.data_line_active_negation)
+ mb[1] |= BIT_4;
+ mb[2] = 0;
+ if (nv->bus[1].config_2.req_ack_active_negation)
+ mb[2] |= BIT_5;
+ if (nv->bus[1].config_2.data_line_active_negation)
+ mb[2] |= BIT_4;
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+
+ mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
+ mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+
+ /* thingy */
+ mb[0] = MBC_SET_PCI_CONTROL;
+ mb[1] = 2; /* Data DMA Channel Burst Enable */
+ mb[2] = 2; /* Command DMA Channel Burst Enable */
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+
+ mb[0] = MBC_SET_TAG_AGE_LIMIT;
+ mb[1] = 8;
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+
+ /* Selection timeout. */
+ mb[0] = MBC_SET_SELECTION_TIMEOUT;
+ mb[1] = nv->bus[0].selection_timeout;
+ mb[2] = nv->bus[1].selection_timeout;
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+
+ for (bus = 0; bus < ha->ports; bus++)
+ status |= qla1280_config_bus(ha, bus);
+
+ if (status)
+ dprintk(2, "qla1280_nvram_config: **** FAILED ****\n");
+
+ LEAVE("qla1280_nvram_config");
+ return status;
+}
+
+/*
+ * Get NVRAM data word
+ * Calculates word position in NVRAM and calls request routine to
+ * get the word from NVRAM.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * address = NVRAM word address.
+ *
+ * Returns:
+ * data word.
+ */
+static uint16_t
+qla1280_get_nvram_word(struct scsi_qla_host *ha, uint32_t address)
+{
+ uint32_t nv_cmd;
+ uint16_t data;
+
+ nv_cmd = address << 16;
+ nv_cmd |= NV_READ_OP;
+
+ data = le16_to_cpu(qla1280_nvram_request(ha, nv_cmd));
+
+ dprintk(8, "qla1280_get_nvram_word: exiting normally NVRAM data = "
+ "0x%x", data);
+
+ return data;
+}
+
+/*
+ * NVRAM request
+ * Sends read command to NVRAM and gets data from NVRAM.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * nv_cmd = Bit 26 = start bit
+ * Bit 25, 24 = opcode
+ * Bit 23-16 = address
+ * Bit 15-0 = write data
+ *
+ * Returns:
+ * data word.
+ */
+static uint16_t
+qla1280_nvram_request(struct scsi_qla_host *ha, uint32_t nv_cmd)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+ int cnt;
+ uint16_t data = 0;
+ uint16_t reg_data;
+
+ /* Send command to NVRAM. */
+
+ nv_cmd <<= 5;
+ for (cnt = 0; cnt < 11; cnt++) {
+ if (nv_cmd & BIT_31)
+ qla1280_nv_write(ha, NV_DATA_OUT);
+ else
+ qla1280_nv_write(ha, 0);
+ nv_cmd <<= 1;
+ }
+
+ /* Read data from NVRAM. */
+
+ for (cnt = 0; cnt < 16; cnt++) {
+ WRT_REG_WORD(&reg->nvram, (NV_SELECT | NV_CLOCK));
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+ NVRAM_DELAY();
+ data <<= 1;
+ reg_data = RD_REG_WORD(&reg->nvram);
+ if (reg_data & NV_DATA_IN)
+ data |= BIT_0;
+ WRT_REG_WORD(&reg->nvram, NV_SELECT);
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+ NVRAM_DELAY();
+ }
+
+ /* Deselect chip. */
+
+ WRT_REG_WORD(&reg->nvram, NV_DESELECT);
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+ NVRAM_DELAY();
+
+ return data;
+}
+
+static void
+qla1280_nv_write(struct scsi_qla_host *ha, uint16_t data)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+
+ WRT_REG_WORD(&reg->nvram, data | NV_SELECT);
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+ NVRAM_DELAY();
+ WRT_REG_WORD(&reg->nvram, data | NV_SELECT | NV_CLOCK);
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+ NVRAM_DELAY();
+ WRT_REG_WORD(&reg->nvram, data | NV_SELECT);
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+ NVRAM_DELAY();
+}
+
+/*
+ * Mailbox Command
+ * Issue mailbox command and waits for completion.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * mr = mailbox registers to load.
+ * mb = data pointer for mailbox registers.
+ *
+ * Output:
+ * mb[MAILBOX_REGISTER_COUNT] = returned mailbox data.
+ *
+ * Returns:
+ * 0 = success
+ */
+static int
+qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+#if 0
+ LIST_HEAD(done_q);
+#endif
+ int status = 0;
+ int cnt;
+ uint16_t *optr, *iptr;
+ uint16_t __iomem *mptr;
+ uint16_t data;
+ DECLARE_COMPLETION(wait);
+ struct timer_list timer;
+
+ ENTER("qla1280_mailbox_command");
+
+ if (ha->mailbox_wait) {
+ printk(KERN_ERR "Warning mailbox wait already in use!\n");
+ }
+ ha->mailbox_wait = &wait;
+
+ /*
+ * We really should start out by verifying that the mailbox is
+ * available before starting sending the command data
+ */
+ /* Load mailbox registers. */
+ mptr = (uint16_t __iomem *) &reg->mailbox0;
+ iptr = mb;
+ for (cnt = 0; cnt < MAILBOX_REGISTER_COUNT; cnt++) {
+ if (mr & BIT_0) {
+ WRT_REG_WORD(mptr, (*iptr));
+ }
+
+ mr >>= 1;
+ mptr++;
+ iptr++;
+ }
+
+ /* Issue set host interrupt command. */
+
+ /* set up a timer just in case we're really jammed */
+ init_timer(&timer);
+ timer.expires = jiffies + 20*HZ;
+ timer.data = (unsigned long)ha;
+ timer.function = qla1280_mailbox_timeout;
+ add_timer(&timer);
+
+ spin_unlock_irq(HOST_LOCK);
+ WRT_REG_WORD(&reg->host_cmd, HC_SET_HOST_INT);
+ data = qla1280_debounce_register(&reg->istatus);
+
+ wait_for_completion(&wait);
+ del_timer_sync(&timer);
+
+ spin_lock_irq(HOST_LOCK);
+
+ ha->mailbox_wait = NULL;
+
+ /* Check for mailbox command timeout. */
+ if (ha->mailbox_out[0] != MBS_CMD_CMP) {
+ printk(KERN_WARNING "qla1280_mailbox_command: Command failed, "
+ "mailbox0 = 0x%04x, mailbox_out0 = 0x%04x, istatus = "
+ "0x%04x\n",
+ mb[0], ha->mailbox_out[0], RD_REG_WORD(&reg->istatus));
+ printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n",
+ RD_REG_WORD(&reg->mailbox0), RD_REG_WORD(&reg->mailbox1),
+ RD_REG_WORD(&reg->mailbox2), RD_REG_WORD(&reg->mailbox3));
+ printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n",
+ RD_REG_WORD(&reg->mailbox4), RD_REG_WORD(&reg->mailbox5),
+ RD_REG_WORD(&reg->mailbox6), RD_REG_WORD(&reg->mailbox7));
+ status = 1;
+ }
+
+ /* Load return mailbox registers. */
+ optr = mb;
+ iptr = (uint16_t *) &ha->mailbox_out[0];
+ mr = MAILBOX_REGISTER_COUNT;
+ memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
+
+#if 0
+ /* Go check for any response interrupts pending. */
+ qla1280_isr(ha, &done_q);
+#endif
+
+ if (ha->flags.reset_marker)
+ qla1280_rst_aen(ha);
+
+#if 0
+ if (!list_empty(&done_q))
+ qla1280_done(ha, &done_q);
+#endif
+
+ if (status)
+ dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
+ "0x%x ****\n", mb[0]);
+
+ LEAVE("qla1280_mailbox_command");
+ return status;
+}
+
+/*
+ * qla1280_poll
+ * Polls ISP for interrupts.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ */
+static void
+qla1280_poll(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+ uint16_t data;
+ LIST_HEAD(done_q);
+
+ /* ENTER("qla1280_poll"); */
+
+ /* Check for pending interrupts. */
+ data = RD_REG_WORD(&reg->istatus);
+ if (data & RISC_INT)
+ qla1280_isr(ha, &done_q);
+
+ if (!ha->mailbox_wait) {
+ if (ha->flags.reset_marker)
+ qla1280_rst_aen(ha);
+ }
+
+ if (!list_empty(&done_q))
+ qla1280_done(ha);
+
+ /* LEAVE("qla1280_poll"); */
+}
+
+/*
+ * qla1280_bus_reset
+ * Issue SCSI bus reset.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * bus = SCSI bus number.
+ *
+ * Returns:
+ * 0 = success
+ */
+static int
+qla1280_bus_reset(struct scsi_qla_host *ha, int bus)
+{
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ uint16_t reset_delay;
+ int status;
+
+ dprintk(3, "qla1280_bus_reset: entered\n");
+
+ if (qla1280_verbose)
+ printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n",
+ ha->host_no, bus);
+
+ reset_delay = ha->bus_settings[bus].bus_reset_delay;
+ mb[0] = MBC_BUS_RESET;
+ mb[1] = reset_delay;
+ mb[2] = (uint16_t) bus;
+ status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+
+ if (status) {
+ if (ha->bus_settings[bus].failed_reset_count > 2)
+ ha->bus_settings[bus].scsi_bus_dead = 1;
+ ha->bus_settings[bus].failed_reset_count++;
+ } else {
+ spin_unlock_irq(HOST_LOCK);
+ schedule_timeout(reset_delay * HZ);
+ spin_lock_irq(HOST_LOCK);
+
+ ha->bus_settings[bus].scsi_bus_dead = 0;
+ ha->bus_settings[bus].failed_reset_count = 0;
+ ha->bus_settings[bus].reset_marker = 0;
+ /* Issue marker command. */
+ qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL);
+ }
+
+ /*
+ * We should probably call qla1280_set_target_parameters()
+ * here as well for all devices on the bus.
+ */
+
+ if (status)
+ dprintk(2, "qla1280_bus_reset: **** FAILED ****\n");
+ else
+ dprintk(3, "qla1280_bus_reset: exiting normally\n");
+
+ return status;
+}
+
+/*
+ * qla1280_device_reset
+ * Issue bus device reset message to the target.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * bus = SCSI BUS number.
+ * target = SCSI ID.
+ *
+ * Returns:
+ * 0 = success
+ */
+static int
+qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
+{
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ int status;
+
+ ENTER("qla1280_device_reset");
+
+ mb[0] = MBC_ABORT_TARGET;
+ mb[1] = (bus ? (target | BIT_7) : target) << 8;
+ mb[2] = 1;
+ status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+
+ /* Issue marker command. */
+ qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
+
+ if (status)
+ dprintk(2, "qla1280_device_reset: **** FAILED ****\n");
+
+ LEAVE("qla1280_device_reset");
+ return status;
+}
+
+/*
+ * qla1280_abort_device
+ * Issue an abort message to the device
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * bus = SCSI BUS.
+ * target = SCSI ID.
+ * lun = SCSI LUN.
+ *
+ * Returns:
+ * 0 = success
+ */
+static int
+qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun)
+{
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ int status;
+
+ ENTER("qla1280_abort_device");
+
+ mb[0] = MBC_ABORT_DEVICE;
+ mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
+ status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+
+ /* Issue marker command. */
+ qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN);
+
+ if (status)
+ dprintk(2, "qla1280_abort_device: **** FAILED ****\n");
+
+ LEAVE("qla1280_abort_device");
+ return status;
+}
+
+/*
+ * qla1280_abort_command
+ * Abort command aborts a specified IOCB.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * sp = SB structure pointer.
+ *
+ * Returns:
+ * 0 = success
+ */
+static int
+qla1280_abort_command(struct scsi_qla_host *ha, struct srb * sp, int handle)
+{
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ unsigned int bus, target, lun;
+ int status;
+
+ ENTER("qla1280_abort_command");
+
+ bus = SCSI_BUS_32(sp->cmd);
+ target = SCSI_TCN_32(sp->cmd);
+ lun = SCSI_LUN_32(sp->cmd);
+
+ sp->flags |= SRB_ABORT_PENDING;
+
+ mb[0] = MBC_ABORT_COMMAND;
+ mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
+ mb[2] = handle >> 16;
+ mb[3] = handle & 0xffff;
+ status = qla1280_mailbox_command(ha, 0x0f, &mb[0]);
+
+ if (status) {
+ dprintk(2, "qla1280_abort_command: **** FAILED ****\n");
+ sp->flags &= ~SRB_ABORT_PENDING;
+ }
+
+
+ LEAVE("qla1280_abort_command");
+ return status;
+}
+
+/*
+ * qla1280_reset_adapter
+ * Reset adapter.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ */
+static void
+qla1280_reset_adapter(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+
+ ENTER("qla1280_reset_adapter");
+
+ /* Disable ISP chip */
+ ha->flags.online = 0;
+ WRT_REG_WORD(&reg->ictrl, ISP_RESET);
+ WRT_REG_WORD(&reg->host_cmd,
+ HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS);
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+
+ LEAVE("qla1280_reset_adapter");
+}
+
+/*
+ * Issue marker command.
+ * Function issues marker IOCB.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * bus = SCSI BUS number
+ * id = SCSI ID
+ * lun = SCSI LUN
+ * type = marker modifier
+ */
+static void
+qla1280_marker(struct scsi_qla_host *ha, int bus, int id, int lun, u8 type)
+{
+ struct mrk_entry *pkt;
+
+ ENTER("qla1280_marker");
+
+ /* Get request packet. */
+ if ((pkt = (struct mrk_entry *) qla1280_req_pkt(ha))) {
+ pkt->entry_type = MARKER_TYPE;
+ pkt->lun = (uint8_t) lun;
+ pkt->target = (uint8_t) (bus ? (id | BIT_7) : id);
+ pkt->modifier = type;
+ pkt->entry_status = 0;
+
+ /* Issue command to ISP */
+ qla1280_isp_cmd(ha);
+ }
+
+ LEAVE("qla1280_marker");
+}
+
+
+/*
+ * qla1280_64bit_start_scsi
+ * The start SCSI is responsible for building request packets on
+ * request ring and modifying ISP input pointer.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * sp = SB structure pointer.
+ *
+ * Returns:
+ * 0 = success, was able to issue command.
+ */
+#ifdef QLA_64BIT_PTR
+static int
+qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+ struct scsi_cmnd *cmd = sp->cmd;
+ cmd_a64_entry_t *pkt;
+ struct scatterlist *sg = NULL;
+ u32 *dword_ptr;
+ dma_addr_t dma_handle;
+ int status = 0;
+ int cnt;
+ int req_cnt;
+ u16 seg_cnt;
+ u8 dir;
+
+ ENTER("qla1280_64bit_start_scsi:");
+
+ /* Calculate number of entries and segments required. */
+ req_cnt = 1;
+ if (cmd->use_sg) {
+ sg = (struct scatterlist *) cmd->request_buffer;
+ seg_cnt = pci_map_sg(ha->pdev, sg, cmd->use_sg,
+ cmd->sc_data_direction);
+
+ if (seg_cnt > 2) {
+ req_cnt += (seg_cnt - 2) / 5;
+ if ((seg_cnt - 2) % 5)
+ req_cnt++;
+ }
+ } else if (cmd->request_bufflen) { /* If data transfer. */
+ seg_cnt = 1;
+ } else {
+ seg_cnt = 0;
+ }
+
+ if ((req_cnt + 2) >= ha->req_q_cnt) {
+ /* Calculate number of free request entries. */
+ cnt = RD_REG_WORD(&reg->mailbox4);
+ if (ha->req_ring_index < cnt)
+ ha->req_q_cnt = cnt - ha->req_ring_index;
+ else
+ ha->req_q_cnt =
+ REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
+ }
+
+ /* If room for request in request ring. */
+ if ((req_cnt + 2) >= ha->req_q_cnt) {
+ status = 1;
+ dprintk(2, "qla1280_64bit_start_scsi: in-ptr=0x%x req_q_cnt="
+ "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
+ req_cnt);
+ goto out;
+ }
+
+ /* Check for room in outstanding command list. */
+ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
+ ha->outstanding_cmds[cnt] != 0; cnt++);
+
+ if (cnt >= MAX_OUTSTANDING_COMMANDS) {
+ status = 1;
+ dprintk(2, "qla1280_64bit_start_scsi: NO ROOM IN "
+ "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
+ goto out;
+ }
+
+ ha->outstanding_cmds[cnt] = sp;
+ ha->req_q_cnt -= req_cnt;
+ CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1);
+
+ dprintk(2, "64bit_start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp,
+ cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
+ dprintk(2, " bus %i, target %i, lun %i\n",
+ SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
+ qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);
+
+ /*
+ * Build command packet.
+ */
+ pkt = (cmd_a64_entry_t *) ha->request_ring_ptr;
+
+ pkt->entry_type = COMMAND_A64_TYPE;
+ pkt->entry_count = (uint8_t) req_cnt;
+ pkt->sys_define = (uint8_t) ha->req_ring_index;
+ pkt->entry_status = 0;
+ pkt->handle = cpu_to_le32(cnt);
+
+ /* Zero out remaining portion of packet. */
+ memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
+
+ /* Set ISP command timeout. */
+ pkt->timeout = cpu_to_le16(30);
+
+ /* Set device target ID and LUN */
+ pkt->lun = SCSI_LUN_32(cmd);
+ pkt->target = SCSI_BUS_32(cmd) ?
+ (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
+
+ /* Enable simple tag queuing if device supports it. */
+ if (DEV_SIMPLE_TAGS(cmd->device))
+ pkt->control_flags |= cpu_to_le16(BIT_3);
+
+ /* Load SCSI command packet. */
+ pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
+ memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+ /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
+
+ /* Set transfer direction. */
+ dir = qla1280_data_direction(cmd);
+ pkt->control_flags |= cpu_to_le16(dir);
+
+ /* Set total data segment count. */
+ pkt->dseg_count = cpu_to_le16(seg_cnt);
+
+ /*
+ * Load data segments.
+ */
+ if (seg_cnt) { /* If data transfer. */
+ /* Setup packet address segment pointer. */
+ dword_ptr = (u32 *)&pkt->dseg_0_address;
+
+ if (cmd->use_sg) { /* If scatter gather */
+ /* Load command entry data segments. */
+ for (cnt = 0; cnt < 2 && seg_cnt; cnt++, seg_cnt--) {
+ dma_handle = sg_dma_address(sg);
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
+ if (ha->flags.use_pci_vchannel)
+ sn_pci_set_vchan(ha->pdev,
+ (unsigned long *)&dma_handle,
+ SCSI_BUS_32(cmd));
+#endif
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_lo32(dma_handle));
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_hi32(dma_handle));
+ *dword_ptr++ = cpu_to_le32(sg_dma_len(sg));
+ sg++;
+ dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n",
+ cpu_to_le32(pci_dma_hi32(dma_handle)),
+ cpu_to_le32(pci_dma_lo32(dma_handle)),
+ cpu_to_le32(sg_dma_len(sg)));
+ }
+ dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
+ "command packet data - b %i, t %i, l %i \n",
+ SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
+ SCSI_LUN_32(cmd));
+ qla1280_dump_buffer(5, (char *)pkt,
+ REQUEST_ENTRY_SIZE);
+
+ /*
+ * Build continuation packets.
+ */
+ dprintk(3, "S/G Building Continuation...seg_cnt=0x%x "
+ "remains\n", seg_cnt);
+
+ while (seg_cnt > 0) {
+ /* Adjust ring index. */
+ ha->req_ring_index++;
+ if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
+ ha->req_ring_index = 0;
+ ha->request_ring_ptr =
+ ha->request_ring;
+ } else
+ ha->request_ring_ptr++;
+
+ pkt = (cmd_a64_entry_t *)ha->request_ring_ptr;
+
+ /* Zero out packet. */
+ memset(pkt, 0, REQUEST_ENTRY_SIZE);
+
+ /* Load packet defaults. */
+ ((struct cont_a64_entry *) pkt)->entry_type =
+ CONTINUE_A64_TYPE;
+ ((struct cont_a64_entry *) pkt)->entry_count = 1;
+ ((struct cont_a64_entry *) pkt)->sys_define =
+ (uint8_t)ha->req_ring_index;
+ /* Setup packet address segment pointer. */
+ dword_ptr =
+ (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address;
+
+ /* Load continuation entry data segments. */
+ for (cnt = 0; cnt < 5 && seg_cnt;
+ cnt++, seg_cnt--) {
+ dma_handle = sg_dma_address(sg);
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
+ if (ha->flags.use_pci_vchannel)
+ sn_pci_set_vchan(ha->pdev,
+ (unsigned long *)&dma_handle,
+ SCSI_BUS_32(cmd));
+#endif
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_lo32(dma_handle));
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_hi32(dma_handle));
+ *dword_ptr++ =
+ cpu_to_le32(sg_dma_len(sg));
+ dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n",
+ cpu_to_le32(pci_dma_hi32(dma_handle)),
+ cpu_to_le32(pci_dma_lo32(dma_handle)),
+ cpu_to_le32(sg_dma_len(sg)));
+ sg++;
+ }
+ dprintk(5, "qla1280_64bit_start_scsi: "
+ "continuation packet data - b %i, t "
+ "%i, l %i \n", SCSI_BUS_32(cmd),
+ SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
+ qla1280_dump_buffer(5, (char *)pkt,
+ REQUEST_ENTRY_SIZE);
+ }
+ } else { /* No scatter gather data transfer */
+ dma_handle = pci_map_single(ha->pdev,
+ cmd->request_buffer,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+
+ sp->saved_dma_handle = dma_handle;
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
+ if (ha->flags.use_pci_vchannel)
+ sn_pci_set_vchan(ha->pdev,
+ (unsigned long *)&dma_handle,
+ SCSI_BUS_32(cmd));
+#endif
+ *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle));
+ *dword_ptr++ = cpu_to_le32(pci_dma_hi32(dma_handle));
+ *dword_ptr = cpu_to_le32(cmd->request_bufflen);
+
+ dprintk(5, "qla1280_64bit_start_scsi: No scatter/"
+ "gather command packet data - b %i, t %i, "
+ "l %i \n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
+ SCSI_LUN_32(cmd));
+ qla1280_dump_buffer(5, (char *)pkt,
+ REQUEST_ENTRY_SIZE);
+ }
+ } else { /* No data transfer */
+ dprintk(5, "qla1280_64bit_start_scsi: No data, command "
+ "packet data - b %i, t %i, l %i \n",
+ SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
+ qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
+ }
+ /* Adjust ring index. */
+ ha->req_ring_index++;
+ if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
+ ha->req_ring_index = 0;
+ ha->request_ring_ptr = ha->request_ring;
+ } else
+ ha->request_ring_ptr++;
+
+ /* Set chip new ring index. */
+ dprintk(2,
+ "qla1280_64bit_start_scsi: Wakeup RISC for pending command\n");
+ sp->flags |= SRB_SENT;
+ ha->actthreads++;
+ WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
+ /* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */
+ mmiowb();
+
+ out:
+ if (status)
+ dprintk(2, "qla1280_64bit_start_scsi: **** FAILED ****\n");
+ else
+ dprintk(3, "qla1280_64bit_start_scsi: exiting normally\n");
+
+ return status;
+}
+#else /* !QLA_64BIT_PTR */
+
+/*
+ * qla1280_32bit_start_scsi
+ * The start SCSI is responsible for building request packets on
+ * request ring and modifying ISP input pointer.
+ *
+ * The Qlogic firmware interface allows every queue slot to have a SCSI
+ * command and up to 4 scatter/gather (SG) entries. If we need more
+ * than 4 SG entries, then continuation entries are used that can
+ * hold another 7 entries each. The start routine determines if there
+ * is eought empty slots then build the combination of requests to
+ * fulfill the OS request.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * sp = SCSI Request Block structure pointer.
+ *
+ * Returns:
+ * 0 = success, was able to issue command.
+ */
+static int
+qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+ struct scsi_cmnd *cmd = sp->cmd;
+ struct cmd_entry *pkt;
+ struct scatterlist *sg = NULL;
+ uint32_t *dword_ptr;
+ int status = 0;
+ int cnt;
+ int req_cnt;
+ uint16_t seg_cnt;
+ dma_addr_t dma_handle;
+ u8 dir;
+
+ ENTER("qla1280_32bit_start_scsi");
+
+ dprintk(1, "32bit_start: cmd=%p sp=%p CDB=%x\n", cmd, sp,
+ cmd->cmnd[0]);
+
+ /* Calculate number of entries and segments required. */
+ req_cnt = 1;
+ if (cmd->use_sg) {
+ /*
+ * We must build an SG list in adapter format, as the kernel's
+ * SG list cannot be used directly because of data field size
+ * (__alpha__) differences and the kernel SG list uses virtual
+ * addresses where we need physical addresses.
+ */
+ sg = (struct scatterlist *) cmd->request_buffer;
+ seg_cnt = pci_map_sg(ha->pdev, sg, cmd->use_sg,
+ cmd->sc_data_direction);
+
+ /*
+ * if greater than four sg entries then we need to allocate
+ * continuation entries
+ */
+ if (seg_cnt > 4) {
+ req_cnt += (seg_cnt - 4) / 7;
+ if ((seg_cnt - 4) % 7)
+ req_cnt++;
+ }
+ dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x\n",
+ cmd, seg_cnt, req_cnt);
+ } else if (cmd->request_bufflen) { /* If data transfer. */
+ dprintk(3, "No S/G transfer t=%x cmd=%p len=%x CDB=%x\n",
+ SCSI_TCN_32(cmd), cmd, cmd->request_bufflen,
+ cmd->cmnd[0]);
+ seg_cnt = 1;
+ } else {
+ /* dprintk(1, "No data transfer \n"); */
+ seg_cnt = 0;
+ }
+
+ if ((req_cnt + 2) >= ha->req_q_cnt) {
+ /* Calculate number of free request entries. */
+ cnt = RD_REG_WORD(&reg->mailbox4);
+ if (ha->req_ring_index < cnt)
+ ha->req_q_cnt = cnt - ha->req_ring_index;
+ else
+ ha->req_q_cnt =
+ REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
+ }
+
+ dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
+ ha->req_q_cnt, seg_cnt);
+ /* If room for request in request ring. */
+ if ((req_cnt + 2) >= ha->req_q_cnt) {
+ status = 1;
+ dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
+ "req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
+ ha->req_q_cnt, req_cnt);
+ goto out;
+ }
+
+ /* Check for empty slot in outstanding command list. */
+ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
+ (ha->outstanding_cmds[cnt] != 0); cnt++) ;
+
+ if (cnt >= MAX_OUTSTANDING_COMMANDS) {
+ status = 1;
+ dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
+ "ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
+ goto out;
+ }
+
+ CMD_HANDLE(sp->cmd) = (unsigned char *) (unsigned long)(cnt + 1);
+ ha->outstanding_cmds[cnt] = sp;
+ ha->req_q_cnt -= req_cnt;
+
+ /*
+ * Build command packet.
+ */
+ pkt = (struct cmd_entry *) ha->request_ring_ptr;
+
+ pkt->entry_type = COMMAND_TYPE;
+ pkt->entry_count = (uint8_t) req_cnt;
+ pkt->sys_define = (uint8_t) ha->req_ring_index;
+ pkt->entry_status = 0;
+ pkt->handle = cpu_to_le32(cnt);
+
+ /* Zero out remaining portion of packet. */
+ memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
+
+ /* Set ISP command timeout. */
+ pkt->timeout = cpu_to_le16(30);
+
+ /* Set device target ID and LUN */
+ pkt->lun = SCSI_LUN_32(cmd);
+ pkt->target = SCSI_BUS_32(cmd) ?
+ (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
+
+ /* Enable simple tag queuing if device supports it. */
+ if (DEV_SIMPLE_TAGS(cmd->device))
+ pkt->control_flags |= cpu_to_le16(BIT_3);
+
+ /* Load SCSI command packet. */
+ pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
+ memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+
+ /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
+ /* Set transfer direction. */
+ dir = qla1280_data_direction(cmd);
+ pkt->control_flags |= cpu_to_le16(dir);
+
+ /* Set total data segment count. */
+ pkt->dseg_count = cpu_to_le16(seg_cnt);
+
+ /*
+ * Load data segments.
+ */
+ if (seg_cnt) {
+ /* Setup packet address segment pointer. */
+ dword_ptr = &pkt->dseg_0_address;
+
+ if (cmd->use_sg) { /* If scatter gather */
+ dprintk(3, "Building S/G data segments..\n");
+ qla1280_dump_buffer(1, (char *)sg, 4 * 16);
+
+ /* Load command entry data segments. */
+ for (cnt = 0; cnt < 4 && seg_cnt; cnt++, seg_cnt--) {
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_lo32(sg_dma_address(sg)));
+ *dword_ptr++ =
+ cpu_to_le32(sg_dma_len(sg));
+ dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n",
+ (pci_dma_lo32(sg_dma_address(sg))),
+ (sg_dma_len(sg)));
+ sg++;
+ }
+ /*
+ * Build continuation packets.
+ */
+ dprintk(3, "S/G Building Continuation"
+ "...seg_cnt=0x%x remains\n", seg_cnt);
+ while (seg_cnt > 0) {
+ /* Adjust ring index. */
+ ha->req_ring_index++;
+ if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
+ ha->req_ring_index = 0;
+ ha->request_ring_ptr =
+ ha->request_ring;
+ } else
+ ha->request_ring_ptr++;
+
+ pkt = (struct cmd_entry *)ha->request_ring_ptr;
+
+ /* Zero out packet. */
+ memset(pkt, 0, REQUEST_ENTRY_SIZE);
+
+ /* Load packet defaults. */
+ ((struct cont_entry *) pkt)->
+ entry_type = CONTINUE_TYPE;
+ ((struct cont_entry *) pkt)->entry_count = 1;
+
+ ((struct cont_entry *) pkt)->sys_define =
+ (uint8_t) ha->req_ring_index;
+
+ /* Setup packet address segment pointer. */
+ dword_ptr =
+ &((struct cont_entry *) pkt)->dseg_0_address;
+
+ /* Load continuation entry data segments. */
+ for (cnt = 0; cnt < 7 && seg_cnt;
+ cnt++, seg_cnt--) {
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_lo32(sg_dma_address(sg)));
+ *dword_ptr++ =
+ cpu_to_le32(sg_dma_len(sg));
+ dprintk(1,
+ "S/G Segment Cont. phys_addr=0x%x, "
+ "len=0x%x\n",
+ cpu_to_le32(pci_dma_lo32(sg_dma_address(sg))),
+ cpu_to_le32(sg_dma_len(sg)));
+ sg++;
+ }
+ dprintk(5, "qla1280_32bit_start_scsi: "
+ "continuation packet data - "
+ "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd),
+ SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
+ qla1280_dump_buffer(5, (char *)pkt,
+ REQUEST_ENTRY_SIZE);
+ }
+ } else { /* No S/G data transfer */
+ dma_handle = pci_map_single(ha->pdev,
+ cmd->request_buffer,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ sp->saved_dma_handle = dma_handle;
+
+ *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle));
+ *dword_ptr = cpu_to_le32(cmd->request_bufflen);
+ }
+ } else { /* No data transfer at all */
+ dprintk(5, "qla1280_32bit_start_scsi: No data, command "
+ "packet data - \n");
+ qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
+ }
+ dprintk(5, "qla1280_32bit_start_scsi: First IOCB block:\n");
+ qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
+ REQUEST_ENTRY_SIZE);
+
+ /* Adjust ring index. */
+ ha->req_ring_index++;
+ if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
+ ha->req_ring_index = 0;
+ ha->request_ring_ptr = ha->request_ring;
+ } else
+ ha->request_ring_ptr++;
+
+ /* Set chip new ring index. */
+ dprintk(2, "qla1280_32bit_start_scsi: Wakeup RISC "
+ "for pending command\n");
+ sp->flags |= SRB_SENT;
+ ha->actthreads++;
+ WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
+ /* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */
+ mmiowb();
+
+out:
+ if (status)
+ dprintk(2, "qla1280_32bit_start_scsi: **** FAILED ****\n");
+
+ LEAVE("qla1280_32bit_start_scsi");
+
+ return status;
+}
+#endif
+
+/*
+ * qla1280_req_pkt
+ * Function is responsible for locking ring and
+ * getting a zeroed out request packet.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * 0 = failed to get slot.
+ */
+static request_t *
+qla1280_req_pkt(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+ request_t *pkt = NULL;
+ int cnt;
+ uint32_t timer;
+
+ ENTER("qla1280_req_pkt");
+
+ /*
+ * This can be called from interrupt context, damn it!!!
+ */
+ /* Wait for 30 seconds for slot. */
+ for (timer = 15000000; timer; timer--) {
+ if (ha->req_q_cnt > 0) {
+ /* Calculate number of free request entries. */
+ cnt = RD_REG_WORD(&reg->mailbox4);
+ if (ha->req_ring_index < cnt)
+ ha->req_q_cnt = cnt - ha->req_ring_index;
+ else
+ ha->req_q_cnt =
+ REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
+ }
+
+ /* Found empty request ring slot? */
+ if (ha->req_q_cnt > 0) {
+ ha->req_q_cnt--;
+ pkt = ha->request_ring_ptr;
+
+ /* Zero out packet. */
+ memset(pkt, 0, REQUEST_ENTRY_SIZE);
+
+ /*
+ * How can this be right when we have a ring
+ * size of 512???
+ */
+ /* Set system defined field. */
+ pkt->sys_define = (uint8_t) ha->req_ring_index;
+
+ /* Set entry count. */
+ pkt->entry_count = 1;
+
+ break;
+ }
+
+ udelay(2); /* 10 */
+
+ /* Check for pending interrupts. */
+ qla1280_poll(ha);
+ }
+
+ if (!pkt)
+ dprintk(2, "qla1280_req_pkt: **** FAILED ****\n");
+ else
+ dprintk(3, "qla1280_req_pkt: exiting normally\n");
+
+ return pkt;
+}
+
+/*
+ * qla1280_isp_cmd
+ * Function is responsible for modifying ISP input pointer.
+ * Releases ring lock.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ */
+static void
+qla1280_isp_cmd(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+
+ ENTER("qla1280_isp_cmd");
+
+ dprintk(5, "qla1280_isp_cmd: IOCB data:\n");
+ qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
+ REQUEST_ENTRY_SIZE);
+
+ /* Adjust ring index. */
+ ha->req_ring_index++;
+ if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
+ ha->req_ring_index = 0;
+ ha->request_ring_ptr = ha->request_ring;
+ } else
+ ha->request_ring_ptr++;
+
+ /*
+ * Update request index to mailbox4 (Request Queue In).
+ * The mmiowb() ensures that this write is ordered with writes by other
+ * CPUs. Without the mmiowb(), it is possible for the following:
+ * CPUA posts write of index 5 to mailbox4
+ * CPUA releases host lock
+ * CPUB acquires host lock
+ * CPUB posts write of index 6 to mailbox4
+ * On PCI bus, order reverses and write of 6 posts, then index 5,
+ * causing chip to issue full queue of stale commands
+ * The mmiowb() prevents future writes from crossing the barrier.
+ * See Documentation/DocBook/deviceiobook.tmpl for more information.
+ */
+ WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
+ mmiowb();
+
+ LEAVE("qla1280_isp_cmd");
+}
+
+/****************************************************************************/
+/* Interrupt Service Routine. */
+/****************************************************************************/
+
+/****************************************************************************
+ * qla1280_isr
+ * Calls I/O done on command completion.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * done_q = done queue.
+ ****************************************************************************/
+static void
+qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+ struct response *pkt;
+ struct srb *sp = NULL;
+ uint16_t mailbox[MAILBOX_REGISTER_COUNT];
+ uint16_t *wptr;
+ uint32_t index;
+ u16 istatus;
+
+ ENTER("qla1280_isr");
+
+ istatus = RD_REG_WORD(&reg->istatus);
+ if (!(istatus & (RISC_INT | PCI_INT)))
+ return;
+
+ /* Save mailbox register 5 */
+ mailbox[5] = RD_REG_WORD(&reg->mailbox5);
+
+ /* Check for mailbox interrupt. */
+
+ mailbox[0] = RD_REG_WORD_dmasync(&reg->semaphore);
+
+ if (mailbox[0] & BIT_0) {
+ /* Get mailbox data. */
+ /* dprintk(1, "qla1280_isr: In Get mailbox data \n"); */
+
+ wptr = &mailbox[0];
+ *wptr++ = RD_REG_WORD(&reg->mailbox0);
+ *wptr++ = RD_REG_WORD(&reg->mailbox1);
+ *wptr = RD_REG_WORD(&reg->mailbox2);
+ if (mailbox[0] != MBA_SCSI_COMPLETION) {
+ wptr++;
+ *wptr++ = RD_REG_WORD(&reg->mailbox3);
+ *wptr++ = RD_REG_WORD(&reg->mailbox4);
+ wptr++;
+ *wptr++ = RD_REG_WORD(&reg->mailbox6);
+ *wptr = RD_REG_WORD(&reg->mailbox7);
+ }
+
+ /* Release mailbox registers. */
+
+ WRT_REG_WORD(&reg->semaphore, 0);
+ WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
+
+ dprintk(5, "qla1280_isr: mailbox interrupt mailbox[0] = 0x%x",
+ mailbox[0]);
+
+ /* Handle asynchronous event */
+ switch (mailbox[0]) {
+ case MBA_SCSI_COMPLETION: /* Response completion */
+ dprintk(5, "qla1280_isr: mailbox SCSI response "
+ "completion\n");
+
+ if (ha->flags.online) {
+ /* Get outstanding command index. */
+ index = mailbox[2] << 16 | mailbox[1];
+
+ /* Validate handle. */
+ if (index < MAX_OUTSTANDING_COMMANDS)
+ sp = ha->outstanding_cmds[index];
+ else
+ sp = NULL;
+
+ if (sp) {
+ /* Free outstanding command slot. */
+ ha->outstanding_cmds[index] = NULL;
+
+ /* Save ISP completion status */
+ CMD_RESULT(sp->cmd) = 0;
+
+ /* Place block on done queue */
+ list_add_tail(&sp->list, done_q);
+ } else {
+ /*
+ * If we get here we have a real problem!
+ */
+ printk(KERN_WARNING
+ "qla1280: ISP invalid handle");
+ }
+ }
+ break;
+
+ case MBA_BUS_RESET: /* SCSI Bus Reset */
+ ha->flags.reset_marker = 1;
+ index = mailbox[6] & BIT_0;
+ ha->bus_settings[index].reset_marker = 1;
+
+ printk(KERN_DEBUG "qla1280_isr(): index %i "
+ "asynchronous BUS_RESET\n", index);
+ break;
+
+ case MBA_SYSTEM_ERR: /* System Error */
+ printk(KERN_WARNING
+ "qla1280: ISP System Error - mbx1=%xh, mbx2="
+ "%xh, mbx3=%xh\n", mailbox[1], mailbox[2],
+ mailbox[3]);
+ break;
+
+ case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
+ printk(KERN_WARNING
+ "qla1280: ISP Request Transfer Error\n");
+ break;
+
+ case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
+ printk(KERN_WARNING
+ "qla1280: ISP Response Transfer Error\n");
+ break;
+
+ case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
+ dprintk(2, "qla1280_isr: asynchronous WAKEUP_THRES\n");
+ break;
+
+ case MBA_TIMEOUT_RESET: /* Execution Timeout Reset */
+ dprintk(2,
+ "qla1280_isr: asynchronous TIMEOUT_RESET\n");
+ break;
+
+ case MBA_DEVICE_RESET: /* Bus Device Reset */
+ printk(KERN_INFO "qla1280_isr(): asynchronous "
+ "BUS_DEVICE_RESET\n");
+
+ ha->flags.reset_marker = 1;
+ index = mailbox[6] & BIT_0;
+ ha->bus_settings[index].reset_marker = 1;
+ break;
+
+ case MBA_BUS_MODE_CHANGE:
+ dprintk(2,
+ "qla1280_isr: asynchronous BUS_MODE_CHANGE\n");
+ break;
+
+ default:
+ /* dprintk(1, "qla1280_isr: default case of switch MB \n"); */
+ if (mailbox[0] < MBA_ASYNC_EVENT) {
+ wptr = &mailbox[0];
+ memcpy((uint16_t *) ha->mailbox_out, wptr,
+ MAILBOX_REGISTER_COUNT *
+ sizeof(uint16_t));
+
+ if(ha->mailbox_wait != NULL)
+ complete(ha->mailbox_wait);
+ }
+ break;
+ }
+ } else {
+ WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
+ }
+
+ /*
+ * We will receive interrupts during mailbox testing prior to
+ * the card being marked online, hence the double check.
+ */
+ if (!(ha->flags.online && !ha->mailbox_wait)) {
+ dprintk(2, "qla1280_isr: Response pointer Error\n");
+ goto out;
+ }
+
+ if (mailbox[5] >= RESPONSE_ENTRY_CNT)
+ goto out;
+
+ while (ha->rsp_ring_index != mailbox[5]) {
+ pkt = ha->response_ring_ptr;
+
+ dprintk(5, "qla1280_isr: ha->rsp_ring_index = 0x%x, mailbox[5]"
+ " = 0x%x\n", ha->rsp_ring_index, mailbox[5]);
+ dprintk(5,"qla1280_isr: response packet data\n");
+ qla1280_dump_buffer(5, (char *)pkt, RESPONSE_ENTRY_SIZE);
+
+ if (pkt->entry_type == STATUS_TYPE) {
+ if ((le16_to_cpu(pkt->scsi_status) & 0xff)
+ || pkt->comp_status || pkt->entry_status) {
+ dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
+ "0x%x mailbox[5] = 0x%x, comp_status "
+ "= 0x%x, scsi_status = 0x%x\n",
+ ha->rsp_ring_index, mailbox[5],
+ le16_to_cpu(pkt->comp_status),
+ le16_to_cpu(pkt->scsi_status));
+ }
+ } else {
+ dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
+ "0x%x, mailbox[5] = 0x%x\n",
+ ha->rsp_ring_index, mailbox[5]);
+ dprintk(2, "qla1280_isr: response packet data\n");
+ qla1280_dump_buffer(2, (char *)pkt,
+ RESPONSE_ENTRY_SIZE);
+ }
+
+ if (pkt->entry_type == STATUS_TYPE || pkt->entry_status) {
+ dprintk(2, "status: Cmd %p, handle %i\n",
+ ha->outstanding_cmds[pkt->handle]->cmd,
+ pkt->handle);
+ if (pkt->entry_type == STATUS_TYPE)
+ qla1280_status_entry(ha, pkt, done_q);
+ else
+ qla1280_error_entry(ha, pkt, done_q);
+ /* Adjust ring index. */
+ ha->rsp_ring_index++;
+ if (ha->rsp_ring_index == RESPONSE_ENTRY_CNT) {
+ ha->rsp_ring_index = 0;
+ ha->response_ring_ptr = ha->response_ring;
+ } else
+ ha->response_ring_ptr++;
+ WRT_REG_WORD(&reg->mailbox5, ha->rsp_ring_index);
+ }
+ }
+
+ out:
+ LEAVE("qla1280_isr");
+}
+
+/*
+ * qla1280_rst_aen
+ * Processes asynchronous reset.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ */
+static void
+qla1280_rst_aen(struct scsi_qla_host *ha)
+{
+ uint8_t bus;
+
+ ENTER("qla1280_rst_aen");
+
+ if (ha->flags.online && !ha->flags.reset_active &&
+ !ha->flags.abort_isp_active) {
+ ha->flags.reset_active = 1;
+ while (ha->flags.reset_marker) {
+ /* Issue marker command. */
+ ha->flags.reset_marker = 0;
+ for (bus = 0; bus < ha->ports &&
+ !ha->flags.reset_marker; bus++) {
+ if (ha->bus_settings[bus].reset_marker) {
+ ha->bus_settings[bus].reset_marker = 0;
+ qla1280_marker(ha, bus, 0, 0,
+ MK_SYNC_ALL);
+ }
+ }
+ }
+ }
+
+ LEAVE("qla1280_rst_aen");
+}
+
+
+#if LINUX_VERSION_CODE < 0x020500
+/*
+ *
+ */
+static void
+qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha)
+{
+ unsigned char *result;
+ struct nvram *n;
+ int bus, target, lun;
+
+ bus = SCSI_BUS_32(cmd);
+ target = SCSI_TCN_32(cmd);
+ lun = SCSI_LUN_32(cmd);
+
+ /*
+ * Make sure to not touch anything if someone is using the
+ * sg interface.
+ */
+ if (cmd->use_sg || (CMD_RESULT(cmd) >> 16) != DID_OK || lun)
+ return;
+
+ result = cmd->request_buffer;
+ n = &ha->nvram;
+
+ n->bus[bus].target[target].parameter.f.enable_wide = 0;
+ n->bus[bus].target[target].parameter.f.enable_sync = 0;
+ n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
+
+ if (result[7] & 0x60)
+ n->bus[bus].target[target].parameter.f.enable_wide = 1;
+ if (result[7] & 0x10)
+ n->bus[bus].target[target].parameter.f.enable_sync = 1;
+ if ((result[2] >= 3) && (result[4] + 5 > 56) &&
+ (result[56] & 0x4))
+ n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
+
+ dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n",
+ n->bus[bus].target[target].parameter.f.enable_wide,
+ n->bus[bus].target[target].parameter.f.enable_sync,
+ n->bus[bus].target[target].ppr_1x160.flags.enable_ppr);
+}
+#endif
+
+/*
+ * qla1280_status_entry
+ * Processes received ISP status entry.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * pkt = entry pointer.
+ * done_q = done queue.
+ */
+static void
+qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
+ struct list_head *done_q)
+{
+ unsigned int bus, target, lun;
+ int sense_sz;
+ struct srb *sp;
+ struct scsi_cmnd *cmd;
+ uint32_t handle = le32_to_cpu(pkt->handle);
+ uint16_t scsi_status = le16_to_cpu(pkt->scsi_status);
+ uint16_t comp_status = le16_to_cpu(pkt->comp_status);
+
+ ENTER("qla1280_status_entry");
+
+ /* Validate handle. */
+ if (handle < MAX_OUTSTANDING_COMMANDS)
+ sp = ha->outstanding_cmds[handle];
+ else
+ sp = NULL;
+
+ if (!sp) {
+ printk(KERN_WARNING "qla1280: Status Entry invalid handle\n");
+ goto out;
+ }
+
+ /* Free outstanding command slot. */
+ ha->outstanding_cmds[handle] = NULL;
+
+ cmd = sp->cmd;
+
+ /* Generate LU queue on cntrl, target, LUN */
+ bus = SCSI_BUS_32(cmd);
+ target = SCSI_TCN_32(cmd);
+ lun = SCSI_LUN_32(cmd);
+
+ if (comp_status || scsi_status) {
+ dprintk(3, "scsi: comp_status = 0x%x, scsi_status = "
+ "0x%x, handle = 0x%x\n", comp_status,
+ scsi_status, handle);
+ }
+
+ /* Target busy */
+ if (scsi_status & SS_BUSY_CONDITION &&
+ scsi_status != SS_RESERVE_CONFLICT) {
+ CMD_RESULT(cmd) =
+ DID_BUS_BUSY << 16 | (scsi_status & 0xff);
+ } else {
+
+ /* Save ISP completion status */
+ CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd);
+
+ if (scsi_status & SS_CHECK_CONDITION) {
+ if (comp_status != CS_ARS_FAILED) {
+ uint16_t req_sense_length =
+ le16_to_cpu(pkt->req_sense_length);
+ if (req_sense_length < CMD_SNSLEN(cmd))
+ sense_sz = req_sense_length;
+ else
+ /*
+ * scsi_cmnd->sense_buffer is
+ * 64 bytes, why only copy 63?
+ * This looks wrong! /Jes
+ */
+ sense_sz = CMD_SNSLEN(cmd) - 1;
+
+ memcpy(cmd->sense_buffer,
+ &pkt->req_sense_data, sense_sz);
+ } else
+ sense_sz = 0;
+ memset(cmd->sense_buffer + sense_sz, 0,
+ sizeof(cmd->sense_buffer) - sense_sz);
+
+ dprintk(2, "qla1280_status_entry: Check "
+ "condition Sense data, b %i, t %i, "
+ "l %i\n", bus, target, lun);
+ if (sense_sz)
+ qla1280_dump_buffer(2,
+ (char *)cmd->sense_buffer,
+ sense_sz);
+ }
+ }
+
+ /* Place command on done queue. */
+ list_add_tail(&sp->list, done_q);
+ out:
+ LEAVE("qla1280_status_entry");
+}
+
+/*
+ * qla1280_error_entry
+ * Processes error entry.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * pkt = entry pointer.
+ * done_q = done queue.
+ */
+static void
+qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt,
+ struct list_head *done_q)
+{
+ struct srb *sp;
+ uint32_t handle = le32_to_cpu(pkt->handle);
+
+ ENTER("qla1280_error_entry");
+
+ if (pkt->entry_status & BIT_3)
+ dprintk(2, "qla1280_error_entry: BAD PAYLOAD flag error\n");
+ else if (pkt->entry_status & BIT_2)
+ dprintk(2, "qla1280_error_entry: BAD HEADER flag error\n");
+ else if (pkt->entry_status & BIT_1)
+ dprintk(2, "qla1280_error_entry: FULL flag error\n");
+ else
+ dprintk(2, "qla1280_error_entry: UNKNOWN flag error\n");
+
+ /* Validate handle. */
+ if (handle < MAX_OUTSTANDING_COMMANDS)
+ sp = ha->outstanding_cmds[handle];
+ else
+ sp = NULL;
+
+ if (sp) {
+ /* Free outstanding command slot. */
+ ha->outstanding_cmds[handle] = NULL;
+
+ /* Bad payload or header */
+ if (pkt->entry_status & (BIT_3 + BIT_2)) {
+ /* Bad payload or header, set error status. */
+ /* CMD_RESULT(sp->cmd) = CS_BAD_PAYLOAD; */
+ CMD_RESULT(sp->cmd) = DID_ERROR << 16;
+ } else if (pkt->entry_status & BIT_1) { /* FULL flag */
+ CMD_RESULT(sp->cmd) = DID_BUS_BUSY << 16;
+ } else {
+ /* Set error status. */
+ CMD_RESULT(sp->cmd) = DID_ERROR << 16;
+ }
+
+ /* Place command on done queue. */
+ list_add_tail(&sp->list, done_q);
+ }
+#ifdef QLA_64BIT_PTR
+ else if (pkt->entry_type == COMMAND_A64_TYPE) {
+ printk(KERN_WARNING "!qla1280: Error Entry invalid handle");
+ }
+#endif
+
+ LEAVE("qla1280_error_entry");
+}
+
+/*
+ * qla1280_abort_isp
+ * Resets ISP and aborts all outstanding commands.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * 0 = success
+ */
+static int
+qla1280_abort_isp(struct scsi_qla_host *ha)
+{
+ struct device_reg __iomem *reg = ha->iobase;
+ struct srb *sp;
+ int status = 0;
+ int cnt;
+ int bus;
+
+ ENTER("qla1280_abort_isp");
+
+ if (ha->flags.abort_isp_active || !ha->flags.online)
+ goto out;
+
+ ha->flags.abort_isp_active = 1;
+
+ /* Disable ISP interrupts. */
+ qla1280_disable_intrs(ha);
+ WRT_REG_WORD(&reg->host_cmd, HC_PAUSE_RISC);
+ RD_REG_WORD(&reg->id_l);
+
+ printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n",
+ ha->host_no);
+ /* Dequeue all commands in outstanding command list. */
+ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+ struct scsi_cmnd *cmd;
+ sp = ha->outstanding_cmds[cnt];
+ if (sp) {
+
+ cmd = sp->cmd;
+ CMD_RESULT(cmd) = DID_RESET << 16;
+
+ sp->cmd = NULL;
+ ha->outstanding_cmds[cnt] = NULL;
+
+ (*cmd->scsi_done)(cmd);
+
+ sp->flags = 0;
+ }
+ }
+
+ status = qla1280_load_firmware(ha);
+ if (status)
+ goto out;
+
+ /* Setup adapter based on NVRAM parameters. */
+ qla1280_nvram_config (ha);
+
+ status = qla1280_init_rings(ha);
+ if (status)
+ goto out;
+
+ /* Issue SCSI reset. */
+ for (bus = 0; bus < ha->ports; bus++)
+ qla1280_bus_reset(ha, bus);
+
+ ha->flags.abort_isp_active = 0;
+ out:
+ if (status) {
+ printk(KERN_WARNING
+ "qla1280: ISP error recovery failed, board disabled");
+ qla1280_reset_adapter(ha);
+ dprintk(2, "qla1280_abort_isp: **** FAILED ****\n");
+ }
+
+ LEAVE("qla1280_abort_isp");
+ return status;
+}
+
+
+/*
+ * qla1280_debounce_register
+ * Debounce register.
+ *
+ * Input:
+ * port = register address.
+ *
+ * Returns:
+ * register value.
+ */
+static u16
+qla1280_debounce_register(volatile u16 __iomem * addr)
+{
+ volatile u16 ret;
+ volatile u16 ret2;
+
+ ret = RD_REG_WORD(addr);
+ ret2 = RD_REG_WORD(addr);
+
+ if (ret == ret2)
+ return ret;
+
+ do {
+ cpu_relax();
+ ret = RD_REG_WORD(addr);
+ ret2 = RD_REG_WORD(addr);
+ } while (ret != ret2);
+
+ return ret;
+}
+
+
+/************************************************************************
+ * qla1280_check_for_dead_scsi_bus *
+ * *
+ * This routine checks for a dead SCSI bus *
+ ************************************************************************/
+#define SET_SXP_BANK 0x0100
+#define SCSI_PHASE_INVALID 0x87FF
+static int
+qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
+{
+ uint16_t config_reg, scsi_control;
+ struct device_reg __iomem *reg = ha->iobase;
+
+ if (ha->bus_settings[bus].scsi_bus_dead) {
+ WRT_REG_WORD(&reg->host_cmd, HC_PAUSE_RISC);
+ config_reg = RD_REG_WORD(&reg->cfg_1);
+ WRT_REG_WORD(&reg->cfg_1, SET_SXP_BANK);
+ scsi_control = RD_REG_WORD(&reg->scsiControlPins);
+ WRT_REG_WORD(&reg->cfg_1, config_reg);
+ WRT_REG_WORD(&reg->host_cmd, HC_RELEASE_RISC);
+
+ if (scsi_control == SCSI_PHASE_INVALID) {
+ ha->bus_settings[bus].scsi_bus_dead = 1;
+#if 0
+ CMD_RESULT(cp) = DID_NO_CONNECT << 16;
+ CMD_HANDLE(cp) = INVALID_HANDLE;
+ /* ha->actthreads--; */
+
+ (*(cp)->scsi_done)(cp);
+#endif
+ return 1; /* bus is dead */
+ } else {
+ ha->bus_settings[bus].scsi_bus_dead = 0;
+ ha->bus_settings[bus].failed_reset_count = 0;
+ }
+ }
+ return 0; /* bus is not dead */
+}
+
+static void
+qla1280_get_target_parameters(struct scsi_qla_host *ha,
+ struct scsi_device *device)
+{
+ uint16_t mb[MAILBOX_REGISTER_COUNT];
+ int bus, target, lun;
+
+ bus = device->channel;
+ target = device->id;
+ lun = device->lun;
+
+
+ mb[0] = MBC_GET_TARGET_PARAMETERS;
+ mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
+ mb[1] <<= 8;
+ qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,
+ &mb[0]);
+
+ printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun);
+
+ if (mb[3] != 0) {
+ printk(" Sync: period %d, offset %d",
+ (mb[3] & 0xff), (mb[3] >> 8));
+ if (mb[2] & BIT_13)
+ printk(", Wide");
+ if ((mb[2] & BIT_5) && ((mb[6] >> 8) & 0xff) >= 2)
+ printk(", DT");
+ } else
+ printk(" Async");
+
+ if (DEV_SIMPLE_TAGS(device))
+ printk(", Tagged queuing: depth %d", device->queue_depth);
+ printk("\n");
+}
+
+
+#if DEBUG_QLA1280
+static void
+__qla1280_dump_buffer(char *b, int size)
+{
+ int cnt;
+ u8 c;
+
+ printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah "
+ "Bh Ch Dh Eh Fh\n");
+ printk(KERN_DEBUG "---------------------------------------------"
+ "------------------\n");
+
+ for (cnt = 0; cnt < size;) {
+ c = *b++;
+
+ printk("0x%02x", c);
+ cnt++;
+ if (!(cnt % 16))
+ printk("\n");
+ else
+ printk(" ");
+ }
+ if (cnt % 16)
+ printk("\n");
+}
+
+/**************************************************************************
+ * ql1280_print_scsi_cmd
+ *
+ **************************************************************************/
+static void
+__qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
+{
+ struct scsi_qla_host *ha;
+ struct Scsi_Host *host = CMD_HOST(cmd);
+ struct srb *sp;
+ /* struct scatterlist *sg; */
+
+ int i;
+ ha = (struct scsi_qla_host *)host->hostdata;
+
+ sp = (struct srb *)CMD_SP(cmd);
+ printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd));
+ printk(" chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n",
+ SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd),
+ CMD_CDBLEN(cmd));
+ printk(" CDB = ");
+ for (i = 0; i < cmd->cmd_len; i++) {
+ printk("0x%02x ", cmd->cmnd[i]);
+ }
+ printk(" seg_cnt =%d\n", cmd->use_sg);
+ printk(" request buffer=0x%p, request buffer len=0x%x\n",
+ cmd->request_buffer, cmd->request_bufflen);
+ /* if (cmd->use_sg)
+ {
+ sg = (struct scatterlist *) cmd->request_buffer;
+ printk(" SG buffer: \n");
+ qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist)));
+ } */
+ printk(" tag=%d, transfersize=0x%x \n",
+ cmd->tag, cmd->transfersize);
+ printk(" Pid=%li, SP=0x%p\n", cmd->pid, CMD_SP(cmd));
+ printk(" underflow size = 0x%x, direction=0x%x\n",
+ cmd->underflow, cmd->sc_data_direction);
+}
+
+/**************************************************************************
+ * ql1280_dump_device
+ *
+ **************************************************************************/
+static void
+ql1280_dump_device(struct scsi_qla_host *ha)
+{
+
+ struct scsi_cmnd *cp;
+ struct srb *sp;
+ int i;
+
+ printk(KERN_DEBUG "Outstanding Commands on controller:\n");
+
+ for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
+ if ((sp = ha->outstanding_cmds[i]) == NULL)
+ continue;
+ if ((cp = sp->cmd) == NULL)
+ continue;
+ qla1280_print_scsi_cmd(1, cp);
+ }
+}
+#endif
+
+
+enum tokens {
+ TOKEN_NVRAM,
+ TOKEN_SYNC,
+ TOKEN_WIDE,
+ TOKEN_PPR,
+ TOKEN_VERBOSE,
+ TOKEN_DEBUG,
+};
+
+struct setup_tokens {
+ char *token;
+ int val;
+};
+
+static struct setup_tokens setup_token[] __initdata =
+{
+ { "nvram", TOKEN_NVRAM },
+ { "sync", TOKEN_SYNC },
+ { "wide", TOKEN_WIDE },
+ { "ppr", TOKEN_PPR },
+ { "verbose", TOKEN_VERBOSE },
+ { "debug", TOKEN_DEBUG },
+};
+
+
+/**************************************************************************
+ * qla1280_setup
+ *
+ * Handle boot parameters. This really needs to be changed so one
+ * can specify per adapter parameters.
+ **************************************************************************/
+static int __init
+qla1280_setup(char *s)
+{
+ char *cp, *ptr;
+ unsigned long val;
+ int toke;
+
+ cp = s;
+
+ while (cp && (ptr = strchr(cp, ':'))) {
+ ptr++;
+ if (!strcmp(ptr, "yes")) {
+ val = 0x10000;
+ ptr += 3;
+ } else if (!strcmp(ptr, "no")) {
+ val = 0;
+ ptr += 2;
+ } else
+ val = simple_strtoul(ptr, &ptr, 0);
+
+ switch ((toke = qla1280_get_token(cp))) {
+ case TOKEN_NVRAM:
+ if (!val)
+ driver_setup.no_nvram = 1;
+ break;
+ case TOKEN_SYNC:
+ if (!val)
+ driver_setup.no_sync = 1;
+ else if (val != 0x10000)
+ driver_setup.sync_mask = val;
+ break;
+ case TOKEN_WIDE:
+ if (!val)
+ driver_setup.no_wide = 1;
+ else if (val != 0x10000)
+ driver_setup.wide_mask = val;
+ break;
+ case TOKEN_PPR:
+ if (!val)
+ driver_setup.no_ppr = 1;
+ else if (val != 0x10000)
+ driver_setup.ppr_mask = val;
+ break;
+ case TOKEN_VERBOSE:
+ qla1280_verbose = val;
+ break;
+ default:
+ printk(KERN_INFO "qla1280: unknown boot option %s\n",
+ cp);
+ }
+
+ cp = strchr(ptr, ';');
+ if (cp)
+ cp++;
+ else {
+ break;
+ }
+ }
+ return 1;
+}
+
+
+static int
+qla1280_get_token(char *str)
+{
+ char *sep;
+ long ret = -1;
+ int i, len;
+
+ len = sizeof(setup_token)/sizeof(struct setup_tokens);
+
+ sep = strchr(str, ':');
+
+ if (sep) {
+ for (i = 0; i < len; i++){
+
+ if (!strncmp(setup_token[i].token, str, (sep - str))) {
+ ret = setup_token[i].val;
+ break;
+ }
+ }
+ }
+
+ return ret;
+}
+
+#if LINUX_VERSION_CODE >= 0x020600
+static struct scsi_host_template qla1280_driver_template = {
+ .module = THIS_MODULE,
+ .proc_name = "qla1280",
+ .name = "Qlogic ISP 1280/12160",
+ .info = qla1280_info,
+ .slave_configure = qla1280_slave_configure,
+ .queuecommand = qla1280_queuecommand,
+ .eh_abort_handler = qla1280_eh_abort,
+ .eh_device_reset_handler= qla1280_eh_device_reset,
+ .eh_bus_reset_handler = qla1280_eh_bus_reset,
+ .eh_host_reset_handler = qla1280_eh_adapter_reset,
+ .bios_param = qla1280_biosparam,
+ .can_queue = 0xfffff,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+#else
+static Scsi_Host_Template qla1280_driver_template = {
+ .proc_name = "qla1280",
+ .name = "Qlogic ISP 1280/12160",
+ .detect = qla1280_detect,
+ .release = qla1280_release,
+ .info = qla1280_info,
+ .queuecommand = qla1280_queuecommand,
+ .eh_abort_handler = qla1280_eh_abort,
+ .eh_device_reset_handler= qla1280_eh_device_reset,
+ .eh_bus_reset_handler = qla1280_eh_bus_reset,
+ .eh_host_reset_handler = qla1280_eh_adapter_reset,
+ .bios_param = qla1280_biosparam_old,
+ .can_queue = 0xfffff,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = ENABLE_CLUSTERING,
+ .use_new_eh_code = 1,
+};
+#endif
+
+static int __devinit
+qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int devnum = id->driver_data;
+ struct qla_boards *bdp = &ql1280_board_tbl[devnum];
+ struct Scsi_Host *host;
+ struct scsi_qla_host *ha;
+ int error = -ENODEV;
+
+ /* Bypass all AMI SUBSYS VENDOR IDs */
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_AMI) {
+ printk(KERN_INFO
+ "qla1280: Skipping AMI SubSys Vendor ID Chip\n");
+ goto error;
+ }
+
+ printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n",
+ bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn));
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_WARNING
+ "qla1280: Failed to enabled pci device, aborting.\n");
+ goto error;
+ }
+
+ pci_set_master(pdev);
+
+ error = -ENOMEM;
+ host = scsi_host_alloc(&qla1280_driver_template, sizeof(*ha));
+ if (!host) {
+ printk(KERN_WARNING
+ "qla1280: Failed to register host, aborting.\n");
+ goto error_disable_device;
+ }
+
+ ha = (struct scsi_qla_host *)host->hostdata;
+ memset(ha, 0, sizeof(struct scsi_qla_host));
+
+ ha->pdev = pdev;
+ ha->devnum = devnum; /* specifies microcode load address */
+
+#ifdef QLA_64BIT_PTR
+ if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
+ if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+ printk(KERN_WARNING "scsi(%li): Unable to set a "
+ " suitable DMA mask - aboring\n", ha->host_no);
+ error = -ENODEV;
+ goto error_free_irq;
+ }
+ } else
+ dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
+ ha->host_no);
+#else
+ if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+ printk(KERN_WARNING "scsi(%li): Unable to set a "
+ " suitable DMA mask - aboring\n", ha->host_no);
+ error = -ENODEV;
+ goto error_free_irq;
+ }
+#endif
+
+ ha->request_ring = pci_alloc_consistent(ha->pdev,
+ ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
+ &ha->request_dma);
+ if (!ha->request_ring) {
+ printk(KERN_INFO "qla1280: Failed to get request memory\n");
+ goto error_put_host;
+ }
+
+ ha->response_ring = pci_alloc_consistent(ha->pdev,
+ ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
+ &ha->response_dma);
+ if (!ha->response_ring) {
+ printk(KERN_INFO "qla1280: Failed to get response memory\n");
+ goto error_free_request_ring;
+ }
+
+ ha->ports = bdp->numPorts;
+
+ ha->host = host;
+ ha->host_no = host->host_no;
+
+ host->irq = pdev->irq;
+ host->max_channel = bdp->numPorts - 1;
+ host->max_lun = MAX_LUNS - 1;
+ host->max_id = MAX_TARGETS;
+ host->max_sectors = 1024;
+ host->unique_id = host->host_no;
+
+#if LINUX_VERSION_CODE < 0x020545
+ host->select_queue_depths = qla1280_select_queue_depth;
+#endif
+
+ error = -ENODEV;
+
+#if MEMORY_MAPPED_IO
+ ha->mmpbase = ioremap(pci_resource_start(ha->pdev, 1),
+ pci_resource_len(ha->pdev, 1));
+ if (!ha->mmpbase) {
+ printk(KERN_INFO "qla1280: Unable to map I/O memory\n");
+ goto error_free_response_ring;
+ }
+
+ host->base = (unsigned long)ha->mmpbase;
+ ha->iobase = (struct device_reg __iomem *)ha->mmpbase;
+#else
+ host->io_port = pci_resource_start(ha->pdev, 0);
+ if (!request_region(host->io_port, 0xff, "qla1280")) {
+ printk(KERN_INFO "qla1280: Failed to reserve i/o region "
+ "0x%04lx-0x%04lx - already in use\n",
+ host->io_port, host->io_port + 0xff);
+ goto error_free_response_ring;
+ }
+
+ ha->iobase = (struct device_reg *)host->io_port;
+#endif
+
+ INIT_LIST_HEAD(&ha->done_q);
+
+ /* Disable ISP interrupts. */
+ qla1280_disable_intrs(ha);
+
+ if (request_irq(pdev->irq, qla1280_intr_handler, SA_SHIRQ,
+ "qla1280", ha)) {
+ printk("qla1280 : Failed to reserve interrupt %d already "
+ "in use\n", pdev->irq);
+ goto error_release_region;
+ }
+
+ /* load the F/W, read paramaters, and init the H/W */
+ if (qla1280_initialize_adapter(ha)) {
+ printk(KERN_INFO "qla1x160: Failed to initialize adapter\n");
+ goto error_free_irq;
+ }
+
+ /* set our host ID (need to do something about our two IDs) */
+ host->this_id = ha->bus_settings[0].id;
+
+ pci_set_drvdata(pdev, host);
+
+#if LINUX_VERSION_CODE >= 0x020600
+ error = scsi_add_host(host, &pdev->dev);
+ if (error)
+ goto error_disable_adapter;
+ scsi_scan_host(host);
+#else
+ scsi_set_pci_device(host, pdev);
+#endif
+
+ return 0;
+
+#if LINUX_VERSION_CODE >= 0x020600
+ error_disable_adapter:
+ WRT_REG_WORD(&ha->iobase->ictrl, 0);
+#endif
+ error_free_irq:
+ free_irq(pdev->irq, ha);
+ error_release_region:
+#if MEMORY_MAPPED_IO
+ iounmap(ha->mmpbase);
+#else
+ release_region(host->io_port, 0xff);
+#endif
+ error_free_response_ring:
+ pci_free_consistent(ha->pdev,
+ ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
+ ha->response_ring, ha->response_dma);
+ error_free_request_ring:
+ pci_free_consistent(ha->pdev,
+ ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
+ ha->request_ring, ha->request_dma);
+ error_put_host:
+ scsi_host_put(host);
+ error_disable_device:
+ pci_disable_device(pdev);
+ error:
+ return error;
+}
+
+
+static void __devexit
+qla1280_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
+
+#if LINUX_VERSION_CODE >= 0x020600
+ scsi_remove_host(host);
+#endif
+
+ WRT_REG_WORD(&ha->iobase->ictrl, 0);
+
+ free_irq(pdev->irq, ha);
+
+#if MEMORY_MAPPED_IO
+ iounmap(ha->mmpbase);
+#else
+ release_region(host->io_port, 0xff);
+#endif
+
+ pci_free_consistent(ha->pdev,
+ ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
+ ha->request_ring, ha->request_dma);
+ pci_free_consistent(ha->pdev,
+ ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
+ ha->response_ring, ha->response_dma);
+
+ pci_disable_device(pdev);
+
+ scsi_host_put(host);
+}
+
+#if LINUX_VERSION_CODE >= 0x020600
+static struct pci_driver qla1280_pci_driver = {
+ .name = "qla1280",
+ .id_table = qla1280_pci_tbl,
+ .probe = qla1280_probe_one,
+ .remove = __devexit_p(qla1280_remove_one),
+};
+
+static int __init
+qla1280_init(void)
+{
+ if (sizeof(struct srb) > sizeof(struct scsi_pointer)) {
+ printk(KERN_WARNING
+ "qla1280: struct srb too big, aborting\n");
+ return -EINVAL;
+ }
+
+#ifdef MODULE
+ /*
+ * If we are called as a module, the qla1280 pointer may not be null
+ * and it would point to our bootup string, just like on the lilo
+ * command line. IF not NULL, then process this config string with
+ * qla1280_setup
+ *
+ * Boot time Options
+ * To add options at boot time add a line to your lilo.conf file like:
+ * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
+ * which will result in the first four devices on the first two
+ * controllers being set to a tagged queue depth of 32.
+ */
+ if (qla1280)
+ qla1280_setup(qla1280);
+#endif
+
+ return pci_module_init(&qla1280_pci_driver);
+}
+
+static void __exit
+qla1280_exit(void)
+{
+ pci_unregister_driver(&qla1280_pci_driver);
+}
+
+module_init(qla1280_init);
+module_exit(qla1280_exit);
+
+#else
+# define driver_template qla1280_driver_template
+# include "scsi_module.c"
+#endif
+
+MODULE_AUTHOR("Qlogic & Jes Sorensen");
+MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(QLA1280_VERSION);
+
+/*
+ * Overrides for Emacs so that we almost follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only. This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */