scsi: ufs-qcom: add debug prints for test bus

Adds support for configuring and reading the test bus and debug
registers. This change also adds another vops in order to print the
debug registers.

Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 36 insertions, 1 deletions

diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index db2c0a00e846..1b71a1b0be9f 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -58,6 +58,16 @@ enum {
 	REG_UFS_CFG2                        = 0xE0,
 	REG_UFS_HW_VERSION                  = 0xE4,
 
+	UFS_TEST_BUS				= 0xE8,
+	UFS_TEST_BUS_CTRL_0			= 0xEC,
+	UFS_TEST_BUS_CTRL_1			= 0xF0,
+	UFS_TEST_BUS_CTRL_2			= 0xF4,
+	UFS_UNIPRO_CFG				= 0xF8,
+
+};
+
+/* QCOM UFS host controller vendor specific debug registers */
+enum {
 	UFS_DBG_RD_REG_UAWM			= 0x100,
 	UFS_DBG_RD_REG_UARM			= 0x200,
 	UFS_DBG_RD_REG_TXUC			= 0x300,
@@ -73,6 +83,9 @@ enum {
 	UFS_UFS_DBG_RD_EDTL_RAM			= 0x1900,
 };
 
+#define TEST_BUS_EN		BIT(18)
+#define TEST_BUS_SEL		GENMASK(22, 19)
+
 /* bit definitions for REG_UFS_CFG2 register */
 #define UAWM_HW_CGC_EN		(1 << 0)
 #define UARM_HW_CGC_EN		(1 << 1)
@@ -83,6 +96,9 @@ enum {
 #define TMRLUT_HW_CGC_EN	(1 << 6)
 #define OCSC_HW_CGC_EN		(1 << 7)
 
+/* bit definition for UFS_UFS_TEST_BUS_CTRL_n */
+#define TEST_BUS_SUB_SEL_MASK	0x1F  /* All XXX_SEL fields are 5 bits wide */
+
 #define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
 				 TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
 				 DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
@@ -106,6 +122,15 @@ enum ufs_qcom_phy_init_type {
 	UFS_PHY_INIT_CFG_RESTORE,
 };
 
+/* QCOM UFS debug print bit mask */
+#define UFS_QCOM_DBG_PRINT_REGS_EN	BIT(0)
+#define UFS_QCOM_DBG_PRINT_ICE_REGS_EN	BIT(1)
+#define UFS_QCOM_DBG_PRINT_TEST_BUS_EN	BIT(2)
+
+#define UFS_QCOM_DBG_PRINT_ALL	\
+	(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_ICE_REGS_EN | \
+	 UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
+
 static inline void
 ufs_qcom_get_controller_revision(struct ufs_hba *hba,
 				 u8 *major, u16 *minor, u16 *step)
@@ -157,8 +182,13 @@ struct ufs_hw_version {
 	u16 minor;
 	u8 major;
 };
-struct ufs_qcom_host {
 
+struct ufs_qcom_testbus {
+	u8 select_major;
+	u8 select_minor;
+};
+
+struct ufs_qcom_host {
 	/*
 	 * Set this capability if host controller supports the QUniPro mode
 	 * and if driver wants the Host controller to operate in QUniPro mode.
@@ -179,12 +209,17 @@ struct ufs_qcom_host {
 	bool is_lane_clks_enabled;
 
 	struct ufs_hw_version hw_ver;
+	/* Bitmask for enabling debug prints */
+	u32 dbg_print_en;
+	struct ufs_qcom_testbus testbus;
 };
 
 #define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
 #define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
 #define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
 
+int ufs_qcom_testbus_config(struct ufs_qcom_host *host);
+
 static inline bool ufs_qcom_cap_qunipro(struct ufs_qcom_host *host)
 {
 	if (host->caps & UFS_QCOM_CAP_QUNIPRO)