diff options
author | Mark Brown <broonie@kernel.org> | 2021-06-25 14:08:26 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2021-06-25 14:08:26 +0100 |
commit | 1bee1ecf232cd90ad112d78ab5124850b4e5ea09 (patch) | |
tree | 850cf42ea49ec040c2042fdd8bc61d332461e948 /drivers/spi | |
parent | edf978a5a17dc9e38625b33821dc71f10c46f694 (diff) | |
parent | b470e10eb43f19e08245cd87dd3192a8141cfbb5 (diff) | |
download | linux-1bee1ecf232cd90ad112d78ab5124850b4e5ea09.tar.gz linux-1bee1ecf232cd90ad112d78ab5124850b4e5ea09.tar.bz2 linux-1bee1ecf232cd90ad112d78ab5124850b4e5ea09.zip |
Merge remote-tracking branch 'spi/for-5.14' into spi-next
Diffstat (limited to 'drivers/spi')
37 files changed, 830 insertions, 668 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f4481fe48bf0..e71a4c514f7b 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -806,6 +806,7 @@ config SPI_STM32_QSPI tristate "STMicroelectronics STM32 QUAD SPI controller" depends on ARCH_STM32 || COMPILE_TEST depends on OF + depends on SPI_MEM help This enables support for the Quad SPI controller in master mode. This driver does not support generic SPI. The implementation only diff --git a/drivers/spi/spi-altera-dfl.c b/drivers/spi/spi-altera-dfl.c index 3e32e4fe5895..39a3e1a032e0 100644 --- a/drivers/spi/spi-altera-dfl.c +++ b/drivers/spi/spi-altera-dfl.c @@ -148,10 +148,8 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev) base = devm_ioremap_resource(dev, &dfl_dev->mmio_res); - if (IS_ERR(base)) { - dev_err(dev, "%s get mem resource fail!\n", __func__); + if (IS_ERR(base)) return PTR_ERR(base); - } config_spi_master(base, master); dev_dbg(dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__, diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index 98ace748cd98..d1e287d2d9cd 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -19,7 +19,6 @@ #include <linux/bitops.h> #include <linux/clk.h> #include <linux/err.h> -#include <linux/platform_data/spi-ath79.h> #define DRV_NAME "ath79-spi" @@ -138,7 +137,6 @@ static int ath79_spi_probe(struct platform_device *pdev) { struct spi_master *master; struct ath79_spi *sp; - struct ath79_spi_platform_data *pdata; unsigned long rate; int ret; @@ -152,15 +150,10 @@ static int ath79_spi_probe(struct platform_device *pdev) master->dev.of_node = pdev->dev.of_node; platform_set_drvdata(pdev, sp); - pdata = dev_get_platdata(&pdev->dev); - master->use_gpio_descriptors = true; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); master->flags = SPI_MASTER_GPIO_SS; - if (pdata) { - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->num_chipselect; - } + master->num_chipselect = 3; sp->bitbang.master = master; sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 7cd5fe00dfc1..2ef74885ffa2 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -700,7 +700,6 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master, static int atmel_spi_next_xfer_dma_submit(struct spi_master *master, struct spi_transfer *xfer, u32 *plen) - __must_hold(&as->lock) { struct atmel_spi *as = spi_master_get_devdata(master); struct dma_chan *rxchan = master->dma_rx; @@ -716,8 +715,6 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master, if (!rxchan || !txchan) return -ENODEV; - /* release lock for DMA operations */ - atmel_spi_unlock(as); *plen = xfer->len; @@ -786,15 +783,12 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master, rxchan->device->device_issue_pending(rxchan); txchan->device->device_issue_pending(txchan); - /* take back lock */ - atmel_spi_lock(as); return 0; err_dma: spi_writel(as, IDR, SPI_BIT(OVRES)); atmel_spi_stop_dma(master); err_exit: - atmel_spi_lock(as); return -ENOMEM; } @@ -863,7 +857,6 @@ static int atmel_spi_set_xfer_speed(struct atmel_spi *as, * lock is held, spi irq is blocked */ static void atmel_spi_pdc_next_xfer(struct spi_master *master, - struct spi_message *msg, struct spi_transfer *xfer) { struct atmel_spi *as = spi_master_get_devdata(master); @@ -879,12 +872,12 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master, spi_writel(as, RPR, rx_dma); spi_writel(as, TPR, tx_dma); - if (msg->spi->bits_per_word > 8) + if (xfer->bits_per_word > 8) len >>= 1; spi_writel(as, RCR, len); spi_writel(as, TCR, len); - dev_dbg(&msg->spi->dev, + dev_dbg(&master->dev, " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n", xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma, xfer->rx_buf, @@ -898,12 +891,12 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master, spi_writel(as, RNPR, rx_dma); spi_writel(as, TNPR, tx_dma); - if (msg->spi->bits_per_word > 8) + if (xfer->bits_per_word > 8) len >>= 1; spi_writel(as, RNCR, len); spi_writel(as, TNCR, len); - dev_dbg(&msg->spi->dev, + dev_dbg(&master->dev, " next xfer %p: len %u tx %p/%08llx rx %p/%08llx\n", xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma, xfer->rx_buf, @@ -1054,8 +1047,6 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) /* Interrupt * - * No need for locking in this Interrupt handler: done_status is the - * only information modified. */ static irqreturn_t atmel_spi_pio_interrupt(int irq, void *dev_id) @@ -1273,12 +1264,28 @@ static int atmel_spi_setup(struct spi_device *spi) return 0; } +static void atmel_spi_set_cs(struct spi_device *spi, bool enable) +{ + struct atmel_spi *as = spi_master_get_devdata(spi->master); + /* the core doesn't really pass us enable/disable, but CS HIGH vs CS LOW + * since we already have routines for activate/deactivate translate + * high/low to active/inactive + */ + enable = (!!(spi->mode & SPI_CS_HIGH) == enable); + + if (enable) { + cs_activate(as, spi); + } else { + cs_deactivate(as, spi); + } + +} + static int atmel_spi_one_transfer(struct spi_master *master, - struct spi_message *msg, + struct spi_device *spi, struct spi_transfer *xfer) { struct atmel_spi *as; - struct spi_device *spi = msg->spi; u8 bits; u32 len; struct atmel_spi_device *asd; @@ -1288,11 +1295,6 @@ static int atmel_spi_one_transfer(struct spi_master *master, as = spi_master_get_devdata(master); - if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { - dev_dbg(&spi->dev, "missing rx or tx buf\n"); - return -EINVAL; - } - asd = spi->controller_state; bits = (asd->csr >> 4) & 0xf; if (bits != xfer->bits_per_word - 8) { @@ -1305,13 +1307,13 @@ static int atmel_spi_one_transfer(struct spi_master *master, * DMA map early, for performance (empties dcache ASAP) and * better fault reporting. */ - if ((!msg->is_dma_mapped) + if ((!master->cur_msg_mapped) && as->use_pdc) { if (atmel_spi_dma_map_xfer(as, xfer) < 0) return -ENOMEM; } - atmel_spi_set_xfer_speed(as, msg->spi, xfer); + atmel_spi_set_xfer_speed(as, spi, xfer); as->done_status = 0; as->current_transfer = xfer; @@ -1320,7 +1322,9 @@ static int atmel_spi_one_transfer(struct spi_master *master, reinit_completion(&as->xfer_completion); if (as->use_pdc) { - atmel_spi_pdc_next_xfer(master, msg, xfer); + atmel_spi_lock(as); + atmel_spi_pdc_next_xfer(master, xfer); + atmel_spi_unlock(as); } else if (atmel_spi_use_dma(as, xfer)) { len = as->current_remaining_bytes; ret = atmel_spi_next_xfer_dma_submit(master, @@ -1328,21 +1332,21 @@ static int atmel_spi_one_transfer(struct spi_master *master, if (ret) { dev_err(&spi->dev, "unable to use DMA, fallback to PIO\n"); - atmel_spi_next_xfer_pio(master, xfer); + as->done_status = ret; + break; } else { as->current_remaining_bytes -= len; if (as->current_remaining_bytes < 0) as->current_remaining_bytes = 0; } } else { + atmel_spi_lock(as); atmel_spi_next_xfer_pio(master, xfer); + atmel_spi_unlock(as); } - /* interrupts are disabled, so free the lock for schedule */ - atmel_spi_unlock(as); dma_timeout = wait_for_completion_timeout(&as->xfer_completion, SPI_DMA_TIMEOUT); - atmel_spi_lock(as); if (WARN_ON(dma_timeout == 0)) { dev_err(&spi->dev, "spi transfer timeout\n"); as->done_status = -EIO; @@ -1381,90 +1385,16 @@ static int atmel_spi_one_transfer(struct spi_master *master, } else if (atmel_spi_use_dma(as, xfer)) { atmel_spi_stop_dma(master); } - - if (!msg->is_dma_mapped - && as->use_pdc) - atmel_spi_dma_unmap_xfer(master, xfer); - - return 0; - - } else { - /* only update length if no error */ - msg->actual_length += xfer->len; } - if (!msg->is_dma_mapped + if (!master->cur_msg_mapped && as->use_pdc) atmel_spi_dma_unmap_xfer(master, xfer); - spi_transfer_delay_exec(xfer); - - if (xfer->cs_change) { - if (list_is_last(&xfer->transfer_list, - &msg->transfers)) { - as->keep_cs = true; - } else { - cs_deactivate(as, msg->spi); - udelay(10); - cs_activate(as, msg->spi); - } - } - - return 0; -} - -static int atmel_spi_transfer_one_message(struct spi_master *master, - struct spi_message *msg) -{ - struct atmel_spi *as; - struct spi_transfer *xfer; - struct spi_device *spi = msg->spi; - int ret = 0; - - as = spi_master_get_devdata(master); - - dev_dbg(&spi->dev, "new message %p submitted for %s\n", - msg, dev_name(&spi->dev)); - - atmel_spi_lock(as); - cs_activate(as, spi); - - as->keep_cs = false; - - msg->status = 0; - msg->actual_length = 0; - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - trace_spi_transfer_start(msg, xfer); - - ret = atmel_spi_one_transfer(master, msg, xfer); - if (ret) - goto msg_done; - - trace_spi_transfer_stop(msg, xfer); - } - if (as->use_pdc) atmel_spi_disable_pdc_transfer(as); - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - dev_dbg(&spi->dev, - " xfer %p: len %u tx %p/%pad rx %p/%pad\n", - xfer, xfer->len, - xfer->tx_buf, &xfer->tx_dma, - xfer->rx_buf, &xfer->rx_dma); - } - -msg_done: - if (!as->keep_cs) - cs_deactivate(as, msg->spi); - - atmel_spi_unlock(as); - - msg->status = as->done_status; - spi_finalize_current_message(spi->master); - - return ret; + return as->done_status; } static void atmel_spi_cleanup(struct spi_device *spi) @@ -1554,7 +1484,8 @@ static int atmel_spi_probe(struct platform_device *pdev) master->num_chipselect = 4; master->setup = atmel_spi_setup; master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX); - master->transfer_one_message = atmel_spi_transfer_one_message; + master->transfer_one = atmel_spi_one_transfer; + master->set_cs = atmel_spi_set_cs; master->cleanup = atmel_spi_cleanup; master->auto_runtime_pm = true; master->max_dma_len = SPI_MAX_DMA_XFER; diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index fe40626e45aa..5f8771fe1a31 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -68,7 +68,6 @@ #define BCM2835_SPI_FIFO_SIZE 64 #define BCM2835_SPI_FIFO_SIZE_3_4 48 #define BCM2835_SPI_DMA_MIN_LENGTH 96 -#define BCM2835_SPI_NUM_CS 24 /* raise as necessary */ #define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ | SPI_NO_CS | SPI_3WIRE) @@ -96,8 +95,6 @@ MODULE_PARM_DESC(polling_limit_us, * @rx_prologue: bytes received without DMA if first RX sglist entry's * length is not a multiple of 4 (to overcome hardware limitation) * @tx_spillover: whether @tx_prologue spills over to second TX sglist entry - * @prepare_cs: precalculated CS register value for ->prepare_message() - * (uses slave-specific clock polarity and phase settings) * @debugfs_dir: the debugfs directory - neede to remove debugfs when * unloading the module * @count_transfer_polling: count of how often polling mode is used @@ -107,7 +104,7 @@ MODULE_PARM_DESC(polling_limit_us, * These are counted as well in @count_transfer_polling and * @count_transfer_irq * @count_transfer_dma: count how often dma mode is used - * @chip_select: SPI slave currently selected + * @slv: SPI slave currently selected * (used by bcm2835_spi_dma_tx_done() to write @clear_rx_cs) * @tx_dma_active: whether a TX DMA descriptor is in progress * @rx_dma_active: whether a RX DMA descriptor is in progress @@ -115,11 +112,6 @@ MODULE_PARM_DESC(polling_limit_us, * @fill_tx_desc: preallocated TX DMA descriptor used for RX-only transfers * (cyclically copies from zero page to TX FIFO) * @fill_tx_addr: bus address of zero page - * @clear_rx_desc: preallocated RX DMA descriptor used for TX-only transfers - * (cyclically clears RX FIFO by writing @clear_rx_cs to CS register) - * @clear_rx_addr: bus address of @clear_rx_cs - * @clear_rx_cs: precalculated CS register value to clear RX FIFO - * (uses slave-specific clock polarity and phase settings) */ struct bcm2835_spi { void __iomem *regs; @@ -134,7 +126,6 @@ struct bcm2835_spi { int tx_prologue; int rx_prologue; unsigned int tx_spillover; - u32 prepare_cs[BCM2835_SPI_NUM_CS]; struct dentry *debugfs_dir; u64 count_transfer_polling; @@ -142,14 +133,28 @@ struct bcm2835_spi { u64 count_transfer_irq_after_polling; u64 count_transfer_dma; - u8 chip_select; + struct bcm2835_spidev *slv; unsigned int tx_dma_active; unsigned int rx_dma_active; struct dma_async_tx_descriptor *fill_tx_desc; dma_addr_t fill_tx_addr; - struct dma_async_tx_descriptor *clear_rx_desc[BCM2835_SPI_NUM_CS]; +}; + +/** + * struct bcm2835_spidev - BCM2835 SPI slave + * @prepare_cs: precalculated CS register value for ->prepare_message() + * (uses slave-specific clock polarity and phase settings) + * @clear_rx_desc: preallocated RX DMA descriptor used for TX-only transfers + * (cyclically clears RX FIFO by writing @clear_rx_cs to CS register) + * @clear_rx_addr: bus address of @clear_rx_cs + * @clear_rx_cs: precalculated CS register value to clear RX FIFO + * (uses slave-specific clock polarity and phase settings) + */ +struct bcm2835_spidev { + u32 prepare_cs; + struct dma_async_tx_descriptor *clear_rx_desc; dma_addr_t clear_rx_addr; - u32 clear_rx_cs[BCM2835_SPI_NUM_CS] ____cacheline_aligned; + u32 clear_rx_cs ____cacheline_aligned; }; #if defined(CONFIG_DEBUG_FS) @@ -624,8 +629,7 @@ static void bcm2835_spi_dma_tx_done(void *data) /* busy-wait for TX FIFO to empty */ while (!(bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_DONE)) - bcm2835_wr(bs, BCM2835_SPI_CS, - bs->clear_rx_cs[bs->chip_select]); + bcm2835_wr(bs, BCM2835_SPI_CS, bs->slv->clear_rx_cs); bs->tx_dma_active = false; smp_wmb(); @@ -646,18 +650,18 @@ static void bcm2835_spi_dma_tx_done(void *data) /** * bcm2835_spi_prepare_sg() - prepare and submit DMA descriptor for sglist * @ctlr: SPI master controller - * @spi: SPI slave * @tfr: SPI transfer * @bs: BCM2835 SPI controller + * @slv: BCM2835 SPI slave * @is_tx: whether to submit DMA descriptor for TX or RX sglist * * Prepare and submit a DMA descriptor for the TX or RX sglist of @tfr. * Return 0 on success or a negative error number. */ static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr, - struct spi_device *spi, struct spi_transfer *tfr, struct bcm2835_spi *bs, + struct bcm2835_spidev *slv, bool is_tx) { struct dma_chan *chan; @@ -697,7 +701,7 @@ static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr, } else if (!tfr->rx_buf) { desc->callback = bcm2835_spi_dma_tx_done; desc->callback_param = ctlr; - bs->chip_select = spi->chip_select; + bs->slv = slv; } /* submit it to DMA-engine */ @@ -709,8 +713,8 @@ static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr, /** * bcm2835_spi_transfer_one_dma() - perform SPI transfer using DMA engine * @ctlr: SPI master controller - * @spi: SPI slave * @tfr: SPI transfer + * @slv: BCM2835 SPI slave * @cs: CS register * * For *bidirectional* transfers (both tx_buf and rx_buf are non-%NULL), set up @@ -754,8 +758,8 @@ static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr, * performed at the end of an RX-only transfer. */ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr, - struct spi_device *spi, struct spi_transfer *tfr, + struct bcm2835_spidev *slv, u32 cs) { struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); @@ -773,7 +777,7 @@ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr, /* setup tx-DMA */ if (bs->tx_buf) { - ret = bcm2835_spi_prepare_sg(ctlr, spi, tfr, bs, true); + ret = bcm2835_spi_prepare_sg(ctlr, tfr, bs, slv, true); } else { cookie = dmaengine_submit(bs->fill_tx_desc); ret = dma_submit_error(cookie); @@ -799,9 +803,9 @@ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr, * this saves 10us or more. */ if (bs->rx_buf) { - ret = bcm2835_spi_prepare_sg(ctlr, spi, tfr, bs, false); + ret = bcm2835_spi_prepare_sg(ctlr, tfr, bs, slv, false); } else { - cookie = dmaengine_submit(bs->clear_rx_desc[spi->chip_select]); + cookie = dmaengine_submit(slv->clear_rx_desc); ret = dma_submit_error(cookie); } if (ret) { @@ -850,8 +854,6 @@ static bool bcm2835_spi_can_dma(struct spi_controller *ctlr, static void bcm2835_dma_release(struct spi_controller *ctlr, struct bcm2835_spi *bs) { - int i; - if (ctlr->dma_tx) { dmaengine_terminate_sync(ctlr->dma_tx); @@ -870,17 +872,6 @@ static void bcm2835_dma_release(struct spi_controller *ctlr, if (ctlr->dma_rx) { dmaengine_terminate_sync(ctlr->dma_rx); - - for (i = 0; i < BCM2835_SPI_NUM_CS; i++) - if (bs->clear_rx_desc[i]) - dmaengine_desc_free(bs->clear_rx_desc[i]); - - if (bs->clear_rx_addr) - dma_unmap_single(ctlr->dma_rx->device->dev, - bs->clear_rx_addr, - sizeof(bs->clear_rx_cs), - DMA_TO_DEVICE); - dma_release_channel(ctlr->dma_rx); ctlr->dma_rx = NULL; } @@ -892,7 +883,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev, struct dma_slave_config slave_config; const __be32 *addr; dma_addr_t dma_reg_base; - int ret, i; + int ret; /* base address in dma-space */ addr = of_get_address(ctlr->dev.of_node, 0, NULL, NULL); @@ -972,35 +963,6 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev, if (ret) goto err_config; - bs->clear_rx_addr = dma_map_single(ctlr->dma_rx->device->dev, - bs->clear_rx_cs, - sizeof(bs->clear_rx_cs), - DMA_TO_DEVICE); - if (dma_mapping_error(ctlr->dma_rx->device->dev, bs->clear_rx_addr)) { - dev_err(dev, "cannot map clear_rx_cs - not using DMA mode\n"); - bs->clear_rx_addr = 0; - ret = -ENOMEM; - goto err_release; - } - - for (i = 0; i < BCM2835_SPI_NUM_CS; i++) { - bs->clear_rx_desc[i] = dmaengine_prep_dma_cyclic(ctlr->dma_rx, - bs->clear_rx_addr + i * sizeof(u32), - sizeof(u32), 0, - DMA_MEM_TO_DEV, 0); - if (!bs->clear_rx_desc[i]) { - dev_err(dev, "cannot prepare clear_rx_desc - not using DMA mode\n"); - ret = -ENOMEM; - goto err_release; - } - - ret = dmaengine_desc_set_reuse(bs->clear_rx_desc[i]); - if (ret) { - dev_err(dev, "cannot reuse clear_rx_desc - not using DMA mode\n"); - goto err_release; - } - } - /* all went well, so set can_dma */ ctlr->can_dma = bcm2835_spi_can_dma; @@ -1082,9 +1044,10 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, struct spi_transfer *tfr) { struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); + struct bcm2835_spidev *slv = spi_get_ctldata(spi); unsigned long spi_hz, clk_hz, cdiv; unsigned long hz_per_byte, byte_limit; - u32 cs = bs->prepare_cs[spi->chip_select]; + u32 cs = slv->prepare_cs; /* set clock */ spi_hz = tfr->speed_hz; @@ -1133,7 +1096,7 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, * this 1 idle clock cycle pattern but runs the spi clock without gaps */ if (ctlr->can_dma && bcm2835_spi_can_dma(ctlr, spi, tfr)) - return bcm2835_spi_transfer_one_dma(ctlr, spi, tfr, cs); + return bcm2835_spi_transfer_one_dma(ctlr, tfr, slv, cs); /* run in interrupt-mode */ return bcm2835_spi_transfer_one_irq(ctlr, spi, tfr, cs, true); @@ -1144,6 +1107,7 @@ static int bcm2835_spi_prepare_message(struct spi_controller *ctlr, { struct spi_device *spi = msg->spi; struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); + struct bcm2835_spidev *slv = spi_get_ctldata(spi); int ret; if (ctlr->can_dma) { @@ -1162,7 +1126,7 @@ static int bcm2835_spi_prepare_message(struct spi_controller *ctlr, * Set up clock polarity before spi_transfer_one_message() asserts * chip select to avoid a gratuitous clock signal edge. */ - bcm2835_wr(bs, BCM2835_SPI_CS, bs->prepare_cs[spi->chip_select]); + bcm2835_wr(bs, BCM2835_SPI_CS, slv->prepare_cs); return 0; } @@ -1188,17 +1152,81 @@ static int chip_match_name(struct gpio_chip *chip, void *data) return !strcmp(chip->label, data); } +static void bcm2835_spi_cleanup(struct spi_device *spi) +{ + struct bcm2835_spidev *slv = spi_get_ctldata(spi); + struct spi_controller *ctlr = spi->controller; + + if (slv->clear_rx_desc) + dmaengine_desc_free(slv->clear_rx_desc); + + if (slv->clear_rx_addr) + dma_unmap_single(ctlr->dma_rx->device->dev, + slv->clear_rx_addr, + sizeof(u32), + DMA_TO_DEVICE); + + kfree(slv); +} + +static int bcm2835_spi_setup_dma(struct spi_controller *ctlr, + struct spi_device *spi, + struct bcm2835_spi *bs, + struct bcm2835_spidev *slv) +{ + int ret; + + if (!ctlr->dma_rx) + return 0; + + slv->clear_rx_addr = dma_map_single(ctlr->dma_rx->device->dev, + &slv->clear_rx_cs, + sizeof(u32), + DMA_TO_DEVICE); + if (dma_mapping_error(ctlr->dma_rx->device->dev, slv->clear_rx_addr)) { + dev_err(&spi->dev, "cannot map clear_rx_cs\n"); + slv->clear_rx_addr = 0; + return -ENOMEM; + } + + slv->clear_rx_desc = dmaengine_prep_dma_cyclic(ctlr->dma_rx, + slv->clear_rx_addr, + sizeof(u32), 0, + DMA_MEM_TO_DEV, 0); + if (!slv->clear_rx_desc) { + dev_err(&spi->dev, "cannot prepare clear_rx_desc\n"); + return -ENOMEM; + } + + ret = dmaengine_desc_set_reuse(slv->clear_rx_desc); + if (ret) { + dev_err(&spi->dev, "cannot reuse clear_rx_desc\n"); + return ret; + } + + return 0; +} + static int bcm2835_spi_setup(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); + struct bcm2835_spidev *slv = spi_get_ctldata(spi); struct gpio_chip *chip; + int ret; u32 cs; - if (spi->chip_select >= BCM2835_SPI_NUM_CS) { - dev_err(&spi->dev, "only %d chip-selects supported\n", - BCM2835_SPI_NUM_CS - 1); - return -EINVAL; + if (!slv) { + slv = kzalloc(ALIGN(sizeof(*slv), dma_get_cache_alignment()), + GFP_KERNEL); + if (!slv) + return -ENOMEM; + + spi_set_ctldata(spi, slv); + + ret = bcm2835_spi_setup_dma(ctlr, spi, bs, slv); + if (ret) + goto err_cleanup; } /* @@ -1212,20 +1240,19 @@ static int bcm2835_spi_setup(struct spi_device *spi) cs |= BCM2835_SPI_CS_CPOL; if (spi->mode & SPI_CPHA) cs |= BCM2835_SPI_CS_CPHA; - bs->prepare_cs[spi->chip_select] = cs; + slv->prepare_cs = cs; /* * Precalculate SPI slave's CS register value to clear RX FIFO * in case of a TX-only DMA transfer. */ if (ctlr->dma_rx) { - bs->clear_rx_cs[spi->chip_select] = cs | - BCM2835_SPI_CS_TA | - BCM2835_SPI_CS_DMAEN | - BCM2835_SPI_CS_CLEAR_RX; + slv->clear_rx_cs = cs | BCM2835_SPI_CS_TA | + BCM2835_SPI_CS_DMAEN | + BCM2835_SPI_CS_CLEAR_RX; dma_sync_single_for_device(ctlr->dma_rx->device->dev, - bs->clear_rx_addr, - sizeof(bs->clear_rx_cs), + slv->clear_rx_addr, + sizeof(u32), DMA_TO_DEVICE); } @@ -1247,7 +1274,8 @@ static int bcm2835_spi_setup(struct spi_device *spi) */ dev_err(&spi->dev, "setup: only two native chip-selects are supported\n"); - return -EINVAL; + ret = -EINVAL; + goto err_cleanup; } /* @@ -1268,14 +1296,20 @@ static int bcm2835_spi_setup(struct spi_device *spi) DRV_NAME, GPIO_LOOKUP_FLAGS_DEFAULT, GPIOD_OUT_LOW); - if (IS_ERR(spi->cs_gpiod)) - return PTR_ERR(spi->cs_gpiod); + if (IS_ERR(spi->cs_gpiod)) { + ret = PTR_ERR(spi->cs_gpiod); + goto err_cleanup; + } /* and set up the "mode" and level */ dev_info(&spi->dev, "setting up native-CS%i to use GPIO\n", spi->chip_select); return 0; + +err_cleanup: + bcm2835_spi_cleanup(spi); + return ret; } static int bcm2835_spi_probe(struct platform_device *pdev) @@ -1284,8 +1318,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) struct bcm2835_spi *bs; int err; - ctlr = devm_spi_alloc_master(&pdev->dev, ALIGN(sizeof(*bs), - dma_get_cache_alignment())); + ctlr = devm_spi_alloc_master(&pdev->dev, sizeof(*bs)); if (!ctlr) return -ENOMEM; @@ -1296,6 +1329,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) ctlr->bits_per_word_mask = SPI_BPW_MASK(8); ctlr->num_chipselect = 3; ctlr->setup = bcm2835_spi_setup; + ctlr->cleanup = bcm2835_spi_cleanup; ctlr->transfer_one = bcm2835_spi_transfer_one; ctlr->handle_err = bcm2835_spi_handle_err; ctlr->prepare_message = bcm2835_spi_prepare_message; diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index 75589ac6e95f..37eab100a7d8 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -384,7 +384,7 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master, bs->pending = 0; /* Calculate the estimated time in us the transfer runs. Note that - * there are are 2 idle clocks cycles after each chunk getting + * there are 2 idle clocks cycles after each chunk getting * transferred - in our case the chunk size is 3 bytes, so we * approximate this by 9 cycles/byte. This is used to find the number * of Hz per byte per polling limit. E.g., we can transfer 1 byte in diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 17c06039a74d..3379720cfcb8 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -56,7 +56,7 @@ struct dw_spi_mscc { /* * The Designware SPI controller (referred to as master in the documentation) * automatically deasserts chip select when the tx fifo is empty. The chip - * selects then needs to be either driven as GPIOs or, for the first 4 using the + * selects then needs to be either driven as GPIOs or, for the first 4 using * the SPI boot controller registers. the final chip select is an OR gate * between the Designware SPI controller and the SPI boot controller. */ diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index 3d0d8ddd5772..b3861fb88711 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -639,8 +639,8 @@ static irqreturn_t geni_spi_isr(int irq, void *data) complete(&mas->abort_done); /* - * It's safe or a good idea to Ack all of our our interrupts at the - * end of the function. Specifically: + * It's safe or a good idea to Ack all of our interrupts at the end + * of the function. Specifically: * - M_CMD_DONE_EN / M_RX_FIFO_LAST_EN: Edge triggered interrupts and * clearing Acks. Clearing at the end relies on nobody else having * started a new transfer yet or else we could be clearing _their_ diff --git a/drivers/spi/spi-hisi-kunpeng.c b/drivers/spi/spi-hisi-kunpeng.c index 3f986ba1c328..58b823a16fc4 100644 --- a/drivers/spi/spi-hisi-kunpeng.c +++ b/drivers/spi/spi-hisi-kunpeng.c @@ -9,6 +9,7 @@ #include <linux/acpi.h> #include <linux/bitfield.h> +#include <linux/debugfs.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/interrupt.h> @@ -126,6 +127,7 @@ struct hisi_spi { void __iomem *regs; int irq; u32 fifo_len; /* depth of the FIFO buffer */ + u16 bus_num; /* Current message transfer state info */ const void *tx; @@ -133,8 +135,49 @@ struct hisi_spi { void *rx; unsigned int rx_len; u8 n_bytes; /* current is a 1/2/4 bytes op */ + + struct dentry *debugfs; + struct debugfs_regset32 regset; +}; + +#define HISI_SPI_DBGFS_REG(_name, _off) \ +{ \ + .name = _name, \ + .offset = _off, \ +} + +static const struct debugfs_reg32 hisi_spi_regs[] = { + HISI_SPI_DBGFS_REG("CSCR", HISI_SPI_CSCR), + HISI_SPI_DBGFS_REG("CR", HISI_SPI_CR), + HISI_SPI_DBGFS_REG("ENR", HISI_SPI_ENR), + HISI_SPI_DBGFS_REG("FIFOC", HISI_SPI_FIFOC), + HISI_SPI_DBGFS_REG("IMR", HISI_SPI_IMR), + HISI_SPI_DBGFS_REG("DIN", HISI_SPI_DIN), + HISI_SPI_DBGFS_REG("DOUT", HISI_SPI_DOUT), + HISI_SPI_DBGFS_REG("SR", HISI_SPI_SR), + HISI_SPI_DBGFS_REG("RISR", HISI_SPI_RISR), + HISI_SPI_DBGFS_REG("ISR", HISI_SPI_ISR), + HISI_SPI_DBGFS_REG("ICR", HISI_SPI_ICR), + HISI_SPI_DBGFS_REG("VERSION", HISI_SPI_VERSION), }; +static int hisi_spi_debugfs_init(struct hisi_spi *hs) +{ + char name[32]; + + snprintf(name, 32, "hisi_spi%d", hs->bus_num); + hs->debugfs = debugfs_create_dir(name, NULL); + if (!hs->debugfs) + return -ENOMEM; + + hs->regset.regs = hisi_spi_regs; + hs->regset.nregs = ARRAY_SIZE(hisi_spi_regs); + hs->regset.base = hs->regs; + debugfs_create_regset32("registers", 0400, hs->debugfs, &hs->regset); + + return 0; +} + static u32 hisi_spi_busy(struct hisi_spi *hs) { return readl(hs->regs + HISI_SPI_SR) & SR_BUSY; @@ -424,6 +467,7 @@ static int hisi_spi_probe(struct platform_device *pdev) hs = spi_controller_get_devdata(master); hs->dev = dev; hs->irq = irq; + hs->bus_num = pdev->id; hs->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hs->regs)) @@ -446,7 +490,7 @@ static int hisi_spi_probe(struct platform_device *pdev) master->use_gpio_descriptors = true; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); - master->bus_num = pdev->id; + master->bus_num = hs->bus_num; master->setup = hisi_spi_setup; master->cleanup = hisi_spi_cleanup; master->transfer_one = hisi_spi_transfer_one; @@ -462,6 +506,9 @@ static int hisi_spi_probe(struct platform_device *pdev) return ret; } + if (hisi_spi_debugfs_init(hs)) + dev_info(dev, "failed to create debugfs dir\n"); + ret = spi_register_controller(master); if (ret) { dev_err(dev, "failed to register spi master, ret=%d\n", ret); @@ -478,7 +525,9 @@ static int hisi_spi_probe(struct platform_device *pdev) static int hisi_spi_remove(struct platform_device *pdev) { struct spi_controller *master = platform_get_drvdata(pdev); + struct hisi_spi *hs = spi_controller_get_devdata(master); + debugfs_remove_recursive(hs->debugfs); spi_unregister_controller(master); return 0; diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c index f914b8d2043e..ead0507c63be 100644 --- a/drivers/spi/spi-lm70llp.c +++ b/drivers/spi/spi-lm70llp.c @@ -202,7 +202,7 @@ static void spi_lm70llp_attach(struct parport *p) * the lm70 driver could verify it, reading the manf ID. */ - master = spi_alloc_master(p->physport->dev, sizeof *pp); + master = spi_alloc_master(p->physport->dev, sizeof(*pp)); if (!master) { status = -ENOMEM; goto out_fail; diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index f1cf2232f0b5..4d4f77a186a9 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -875,7 +875,7 @@ static int spi_test_run_iter(struct spi_device *spi, test.transfers[i].len = len; if (test.transfers[i].tx_buf) test.transfers[i].tx_buf += tx_off; - if (test.transfers[i].tx_buf) + if (test.transfers[i].rx_buf) test.transfers[i].rx_buf += rx_off; } diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 1513553e4080..37f4443ce9a0 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -6,6 +6,7 @@ * Author: Boris Brezillon <boris.brezillon@bootlin.com> */ #include <linux/dmaengine.h> +#include <linux/iopoll.h> #include <linux/pm_runtime.h> #include <linux/spi/spi.h> #include <linux/spi/spi-mem.h> @@ -743,6 +744,91 @@ static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv) return container_of(drv, struct spi_mem_driver, spidrv.driver); } +static int spi_mem_read_status(struct spi_mem *mem, + const struct spi_mem_op *op, + u16 *status) +{ + const u8 *bytes = (u8 *)op->data.buf.in; + int ret; + + ret = spi_mem_exec_op(mem, op); + if (ret) + return ret; + + if (op->data.nbytes > 1) + *status = ((u16)bytes[0] << 8) | bytes[1]; + else + *status = bytes[0]; + + return 0; +} + +/** + * spi_mem_poll_status() - Poll memory device status + * @mem: SPI memory device + * @op: the memory operation to execute + * @mask: status bitmask to ckeck + * @match: (status & mask) expected value + * @initial_delay_us: delay in us before starting to poll + * @polling_delay_us: time to sleep between reads in us + * @timeout_ms: timeout in milliseconds + * + * This function polls a status register and returns when + * (status & mask) == match or when the timeout has expired. + * + * Return: 0 in case of success, -ETIMEDOUT in case of error, + * -EOPNOTSUPP if not supported. + */ +int spi_mem_poll_status(struct spi_mem *mem, + const struct spi_mem_op *op, + u16 mask, u16 match, + unsigned long initial_delay_us, + unsigned long polling_delay_us, + u16 timeout_ms) +{ + struct spi_controller *ctlr = mem->spi->controller; + int ret = -EOPNOTSUPP; + int read_status_ret; + u16 status; + + if (op->data.nbytes < 1 || op->data.nbytes > 2 || + op->data.dir != SPI_MEM_DATA_IN) + return -EINVAL; + + if (ctlr->mem_ops && ctlr->mem_ops->poll_status) { + ret = spi_mem_access_start(mem); + if (ret) + return ret; + + ret = ctlr->mem_ops->poll_status(mem, op, mask, match, + initial_delay_us, polling_delay_us, + timeout_ms); + + spi_mem_access_end(mem); + } + + if (ret == -EOPNOTSUPP) { + if (!spi_mem_supports_op(mem, op)) + return ret; + + if (initial_delay_us < 10) + udelay(initial_delay_us); + else + usleep_range((initial_delay_us >> 2) + 1, + initial_delay_us); + + ret = read_poll_timeout(spi_mem_read_status, read_status_ret, + (read_status_ret || ((status) & mask) == match), + polling_delay_us, timeout_ms * 1000, false, mem, + op, &status); + if (read_status_ret) + return read_status_ret; + } + + return ret; +} +EXPORT_SYMBOL_GPL(spi_mem_poll_status); + static int spi_mem_probe(struct spi_device *spi) { struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver); @@ -810,7 +896,7 @@ int spi_mem_driver_register_with_owner(struct spi_mem_driver *memdrv, EXPORT_SYMBOL_GPL(spi_mem_driver_register_with_owner); /** - * spi_mem_driver_unregister_with_owner() - Unregister a SPI memory driver + * spi_mem_driver_unregister() - Unregister a SPI memory driver * @memdrv: the SPI memory driver to unregister * * Unregisters a SPI memory driver. diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index ecba6b4a5d85..b2c4621db34d 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -725,7 +725,7 @@ static int meson_spicc_probe(struct platform_device *pdev) ret = clk_prepare_enable(spicc->pclk); if (ret) { dev_err(&pdev->dev, "pclk clock enable failed\n"); - goto out_master; + goto out_core_clk; } device_reset_optional(&pdev->dev); @@ -752,7 +752,7 @@ static int meson_spicc_probe(struct platform_device *pdev) ret = meson_spicc_clk_init(spicc); if (ret) { dev_err(&pdev->dev, "clock registration failed\n"); - goto out_master; + goto out_clk; } ret = devm_spi_register_master(&pdev->dev, master); @@ -764,9 +764,11 @@ static int meson_spicc_probe(struct platform_device *pdev) return 0; out_clk: - clk_disable_unprepare(spicc->core); clk_disable_unprepare(spicc->pclk); +out_core_clk: + clk_disable_unprepare(spicc->core); + out_master: spi_master_put(master); diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index ea1b07953d38..78a9bca8cc68 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -369,7 +369,7 @@ static int mpc512x_psc_spi_setup(struct spi_device *spi) return -EINVAL; if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); + cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) return -ENOMEM; @@ -491,7 +491,7 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, void *tempp; struct clk *clk; - master = spi_alloc_master(dev, sizeof *mps); + master = spi_alloc_master(dev, sizeof(*mps)); if (master == NULL) return -ENOMEM; diff --git a/drivers/spi/spi-mpc52xx-psc.c b/drivers/spi/spi-mpc52xx-psc.c index 17935e71b02f..21ef5d481faf 100644 --- a/drivers/spi/spi-mpc52xx-psc.c +++ b/drivers/spi/spi-mpc52xx-psc.c @@ -265,7 +265,7 @@ static int mpc52xx_psc_spi_setup(struct spi_device *spi) return -EINVAL; if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); + cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) return -ENOMEM; spi->controller_state = cs; @@ -365,7 +365,7 @@ static int mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr, struct spi_master *master; int ret; - master = spi_alloc_master(dev, sizeof *mps); + master = spi_alloc_master(dev, sizeof(*mps)); if (master == NULL) return -ENOMEM; diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c index 124cba7213f1..51041526546d 100644 --- a/drivers/spi/spi-mpc52xx.c +++ b/drivers/spi/spi-mpc52xx.c @@ -415,7 +415,7 @@ static int mpc52xx_spi_probe(struct platform_device *op) } dev_dbg(&op->dev, "allocating spi_master struct\n"); - master = spi_alloc_master(&op->dev, sizeof *ms); + master = spi_alloc_master(&op->dev, sizeof(*ms)); if (!master) { rc = -ENOMEM; goto err_alloc; diff --git a/drivers/spi/spi-npcm-pspi.c b/drivers/spi/spi-npcm-pspi.c index 56d10c4511db..1668a347e003 100644 --- a/drivers/spi/spi-npcm-pspi.c +++ b/drivers/spi/spi-npcm-pspi.c @@ -105,7 +105,7 @@ static void npcm_pspi_set_mode(struct spi_device *spi) u16 regtemp; u16 mode_val; - switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { + switch (spi->mode & SPI_MODE_X_MASK) { case SPI_MODE_0: mode_val = 0; break; diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c index f3843f0ff260..38c14c4e4e21 100644 --- a/drivers/spi/spi-oc-tiny.c +++ b/drivers/spi/spi-oc-tiny.c @@ -86,7 +86,7 @@ static int tiny_spi_setup(struct spi_device *spi) hw->speed_hz = spi->max_speed_hz; hw->baud = tiny_spi_baud(spi, hw->speed_hz); } - hw->mode = spi->mode & (SPI_CPOL | SPI_CPHA); + hw->mode = spi->mode & SPI_MODE_X_MASK; return 0; } diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 7062f2902253..20b047172965 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -6,7 +6,7 @@ * * Copyright (C) 2005, 2006 Nokia Corporation * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and - * Juha Yrj�l� <juha.yrjola@nokia.com> + * Juha Yrjola <juha.yrjola@nokia.com> */ #include <linux/kernel.h> #include <linux/init.h> @@ -241,7 +241,7 @@ static int omap1_spi100k_setup_transfer(struct spi_device *spi, else word_len = spi->bits_per_word; - if (spi->bits_per_word > 32) + if (word_len > 32) return -EINVAL; cs->word_len = word_len; @@ -296,7 +296,6 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master, list_for_each_entry(t, &m->transfers, transfer_list) { if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { - status = -EINVAL; break; } status = omap1_spi100k_setup_transfer(spi, t); @@ -315,7 +314,6 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master, m->actual_length += count; if (count != t->len) { - status = -EIO; break; } } diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index df28c6664aba..087172a193fa 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -330,7 +330,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if (spi->mode & SPI_CPOL) flags |= UWIRE_CLK_INVERTED; - switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { + switch (spi->mode & SPI_MODE_X_MASK) { case SPI_MODE_0: case SPI_MODE_3: flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE; @@ -460,7 +460,7 @@ static int uwire_probe(struct platform_device *pdev) struct uwire_spi *uwire; int status; - master = spi_alloc_master(&pdev->dev, sizeof *uwire); + master = spi_alloc_master(&pdev->dev, sizeof(*uwire)); if (!master) return -ENODEV; diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index ede7f05e5ced..60c9cdf1c94b 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -4,7 +4,7 @@ * * Copyright (C) 2005, 2006 Nokia Corporation * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and - * Juha Yrj�l� <juha.yrjola@nokia.com> + * Juha Yrjola <juha.yrjola@nokia.com> */ #include <linux/kernel.h> @@ -1054,7 +1054,7 @@ static int omap2_mcspi_setup(struct spi_device *spi) struct omap2_mcspi_cs *cs = spi->controller_state; if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); + cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) return -ENOMEM; cs->base = mcspi->base + spi->chip_select * 0x14; diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 0c9e3f270f05..feebda66f56e 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -288,7 +288,7 @@ #define SPI_POLLING_TIMEOUT 1000 /* - * The type of reading going on on this chip + * The type of reading going on this chip */ enum ssp_reading { READING_NULL, @@ -298,7 +298,7 @@ enum ssp_reading { }; /* - * The type of writing going on on this chip + * The type of writing going on this chip */ enum ssp_writing { WRITING_NULL, diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c index d8ee363fb714..d65f047b6c82 100644 --- a/drivers/spi/spi-ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -34,7 +34,7 @@ #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/dcr.h> #include <asm/dcr-regs.h> @@ -223,7 +223,7 @@ static int spi_ppc4xx_setup(struct spi_device *spi) } if (cs == NULL) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); + cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) return -ENOMEM; spi->controller_state = cs; @@ -235,7 +235,7 @@ static int spi_ppc4xx_setup(struct spi_device *spi) */ cs->mode = SPI_PPC4XX_MODE_SPE; - switch (spi->mode & (SPI_CPHA | SPI_CPOL)) { + switch (spi->mode & SPI_MODE_X_MASK) { case SPI_MODE_0: cs->mode |= SPI_CLK_MODE0; break; @@ -326,7 +326,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw) { /* * On all 4xx PPC's the SPI bus is shared/multiplexed with - * the 2nd I2C bus. We need to enable the the SPI bus before + * the 2nd I2C bus. We need to enable the SPI bus before * using it. */ @@ -349,7 +349,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) int ret; const unsigned int *clk; - master = spi_alloc_master(dev, sizeof *hw); + master = spi_alloc_master(dev, sizeof(*hw)); if (master == NULL) return -ENOMEM; master->dev.of_node = np; diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index 37567bc7a523..be563f0dd03a 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -2,18 +2,18 @@ /* * PXA2xx SPI DMA engine support. * - * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2013, 2021 Intel Corporation * Author: Mika Westerberg <mika.westerberg@linux.intel.com> */ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> -#include <linux/pxa2xx_ssp.h> #include <linux/scatterlist.h> #include <linux/sizes.h> -#include <linux/spi/spi.h> + #include <linux/spi/pxa2xx_spi.h> +#include <linux/spi/spi.h> #include "spi-pxa2xx.h" @@ -26,7 +26,7 @@ static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data, * It is possible that one CPU is handling ROR interrupt and other * just gets DMA completion. Calling pump_transfers() twice for the * same transfer leads to problems thus we prevent concurrent calls - * by using ->dma_running. + * by using dma_running. */ if (atomic_dec_and_test(&drv_data->dma_running)) { /* @@ -34,25 +34,18 @@ static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data, * might not know about the error yet. So we re-check the * ROR bit here before we clear the status register. */ - if (!error) { - u32 status = pxa2xx_spi_read(drv_data, SSSR) - & drv_data->mask_sr; - error = status & SSSR_ROR; - } + if (!error) + error = read_SSSR_bits(drv_data, drv_data->mask_sr) & SSSR_ROR; /* Clear status & disable interrupts */ - pxa2xx_spi_write(drv_data, SSCR1, - pxa2xx_spi_read(drv_data, SSCR1) - & ~drv_data->dma_cr1); + clear_SSCR1_bits(drv_data, drv_data->dma_cr1); write_SSSR_CS(drv_data, drv_data->clear_sr); if (!pxa25x_ssp_comp(drv_data)) pxa2xx_spi_write(drv_data, SSTO, 0); if (error) { /* In case we got an error we disable the SSP now */ - pxa2xx_spi_write(drv_data, SSCR0, - pxa2xx_spi_read(drv_data, SSCR0) - & ~SSCR0_SSE); + pxa_ssp_disable(drv_data->ssp); msg->status = -EIO; } @@ -94,14 +87,14 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, cfg.direction = dir; if (dir == DMA_MEM_TO_DEV) { - cfg.dst_addr = drv_data->ssdr_physical; + cfg.dst_addr = drv_data->ssp->phys_base + SSDR; cfg.dst_addr_width = width; cfg.dst_maxburst = chip->dma_burst_size; sgt = &xfer->tx_sg; chan = drv_data->controller->dma_tx; } else { - cfg.src_addr = drv_data->ssdr_physical; + cfg.src_addr = drv_data->ssp->phys_base + SSDR; cfg.src_addr_width = width; cfg.src_maxburst = chip->dma_burst_size; @@ -111,7 +104,7 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, ret = dmaengine_slave_config(chan, &cfg); if (ret) { - dev_warn(&drv_data->pdev->dev, "DMA slave config failed\n"); + dev_warn(drv_data->ssp->dev, "DMA slave config failed\n"); return NULL; } @@ -123,9 +116,9 @@ irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data) { u32 status; - status = pxa2xx_spi_read(drv_data, SSSR) & drv_data->mask_sr; + status = read_SSSR_bits(drv_data, drv_data->mask_sr); if (status & SSSR_ROR) { - dev_err(&drv_data->pdev->dev, "FIFO overrun\n"); + dev_err(drv_data->ssp->dev, "FIFO overrun\n"); dmaengine_terminate_async(drv_data->controller->dma_rx); dmaengine_terminate_async(drv_data->controller->dma_tx); @@ -145,16 +138,14 @@ int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV, xfer); if (!tx_desc) { - dev_err(&drv_data->pdev->dev, - "failed to get DMA TX descriptor\n"); + dev_err(drv_data->ssp->dev, "failed to get DMA TX descriptor\n"); err = -EBUSY; goto err_tx; } rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM, xfer); if (!rx_desc) { - dev_err(&drv_data->pdev->dev, - "failed to get DMA RX descriptor\n"); + dev_err(drv_data->ssp->dev, "failed to get DMA RX descriptor\n"); err = -EBUSY; goto err_rx; } @@ -191,8 +182,8 @@ void pxa2xx_spi_dma_stop(struct driver_data *drv_data) int pxa2xx_spi_dma_setup(struct driver_data *drv_data) { struct pxa2xx_spi_controller *pdata = drv_data->controller_info; - struct device *dev = &drv_data->pdev->dev; struct spi_controller *controller = drv_data->controller; + struct device *dev = drv_data->ssp->dev; dma_cap_mask_t mask; dma_cap_zero(mask); diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 1833f5876e9f..2e134eb4bd2c 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -1,13 +1,15 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * CE4100's SPI device is more or less the same one as found on PXA + * PCI glue driver for SPI PXA2xx compatible controllers. + * CE4100's SPI device is more or less the same one as found on PXA. * - * Copyright (C) 2016, Intel Corporation + * Copyright (C) 2016, 2021 Intel Corporation */ #include <linux/clk-provider.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/platform_device.h> + #include <linux/spi/pxa2xx_spi.h> #include <linux/dmaengine.h> @@ -178,7 +180,7 @@ static struct pxa_spi_info spi_info_configs[] = { .rx_param = &bsw2_rx_param, }, [PORT_MRFLD] = { - .type = PXA27x_SSP, + .type = MRFLD_SSP, .max_clk_rate = 25000000, .setup = mrfld_spi_setup, }, @@ -239,6 +241,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, spi_pdata.dma_burst_size = c->dma_burst_size ? c->dma_burst_size : 1; ssp = &spi_pdata.ssp; + ssp->dev = &dev->dev; ssp->phys_base = pci_resource_start(dev, 0); ssp->mmio_base = pcim_iomap_table(dev)[0]; ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn; @@ -254,7 +257,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id); ssp->clk = clk_register_fixed_rate(&dev->dev, buf, NULL, 0, c->max_clk_rate); - if (IS_ERR(ssp->clk)) + if (IS_ERR(ssp->clk)) return PTR_ERR(ssp->clk); memset(&pi, 0, sizeof(pi)); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 8ee0cc071777..974e30744b83 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs - * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2013, 2021 Intel Corporation */ #include <linux/acpi.h> @@ -9,6 +9,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/dmaengine.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/gpio/consumer.h> @@ -25,6 +26,7 @@ #include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/slab.h> + #include <linux/spi/pxa2xx_spi.h> #include <linux/spi/spi.h> @@ -38,11 +40,11 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define TIMOUT_DFLT 1000 /* - * for testing SSCR1 changes that require SSP restart, basically - * everything except the service and interrupt enables, the pxa270 developer + * For testing SSCR1 changes that require SSP restart, basically + * everything except the service and interrupt enables, the PXA270 developer * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this - * list, but the PXA255 dev man says all bits without really meaning the - * service and interrupt enables + * list, but the PXA255 developer manual says all bits without really meaning + * the service and interrupt enables. */ #define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \ | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \ @@ -198,6 +200,17 @@ static bool is_mmp2_ssp(const struct driver_data *drv_data) return drv_data->ssp_type == MMP2_SSP; } +static bool is_mrfld_ssp(const struct driver_data *drv_data) +{ + return drv_data->ssp_type == MRFLD_SSP; +} + +static void pxa2xx_spi_update(const struct driver_data *drv_data, u32 reg, u32 mask, u32 value) +{ + if ((pxa2xx_spi_read(drv_data, reg) & mask) != value) + pxa2xx_spi_write(drv_data, reg, value & mask); +} + static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data) { switch (drv_data->ssp_type) { @@ -239,7 +252,7 @@ static bool pxa2xx_spi_txfifo_full(const struct driver_data *drv_data) break; } - return (pxa2xx_spi_read(drv_data, SSSR) & mask) == mask; + return read_SSSR_bits(drv_data, mask) == mask; } static void pxa2xx_spi_clear_rx_thre(const struct driver_data *drv_data, @@ -284,13 +297,11 @@ static u32 pxa2xx_configure_sscr0(const struct driver_data *drv_data, case QUARK_X1000_SSP: return clk_div | QUARK_X1000_SSCR0_Motorola - | QUARK_X1000_SSCR0_DataSize(bits > 32 ? 8 : bits) - | SSCR0_SSE; + | QUARK_X1000_SSCR0_DataSize(bits > 32 ? 8 : bits); default: return clk_div | SSCR0_Motorola | SSCR0_DataSize(bits > 16 ? bits - 16 : bits) - | SSCR0_SSE | (bits > 16 ? SSCR0_EDSS : 0); } } @@ -325,7 +336,7 @@ static void lpss_ssp_setup(struct driver_data *drv_data) u32 value; config = lpss_get_config(drv_data); - drv_data->lpss_base = drv_data->ioaddr + config->offset; + drv_data->lpss_base = drv_data->ssp->mmio_base + config->offset; /* Enable software chip select control */ value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); @@ -421,7 +432,7 @@ static void cs_assert(struct spi_device *spi) spi_controller_get_devdata(spi->controller); if (drv_data->ssp_type == CE4100_SSP) { - pxa2xx_spi_write(drv_data, SSSR, chip->frm); + pxa2xx_spi_write(drv_data, SSSR, spi->chip_select); return; } @@ -430,11 +441,6 @@ static void cs_assert(struct spi_device *spi) return; } - if (chip->gpiod_cs) { - gpiod_set_value(chip->gpiod_cs, chip->gpio_cs_inverted); - return; - } - if (is_lpss_ssp(drv_data)) lpss_ssp_cs_control(spi, true); } @@ -460,11 +466,6 @@ static void cs_deassert(struct spi_device *spi) return; } - if (chip->gpiod_cs) { - gpiod_set_value(chip->gpiod_cs, !chip->gpio_cs_inverted); - return; - } - if (is_lpss_ssp(drv_data)) lpss_ssp_cs_control(spi, false); } @@ -482,7 +483,7 @@ int pxa2xx_spi_flush(struct driver_data *drv_data) unsigned long limit = loops_per_jiffy << 1; do { - while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE) + while (read_SSSR_bits(drv_data, SSSR_RNE)) pxa2xx_spi_read(drv_data, SSDR); } while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit); write_SSSR_CS(drv_data, SSSR_ROR); @@ -496,8 +497,7 @@ static void pxa2xx_spi_off(struct driver_data *drv_data) if (is_mmp2_ssp(drv_data)) return; - pxa2xx_spi_write(drv_data, SSCR0, - pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE); + pxa_ssp_disable(drv_data->ssp); } static int null_writer(struct driver_data *drv_data) @@ -518,8 +518,7 @@ static int null_reader(struct driver_data *drv_data) { u8 n_bytes = drv_data->n_bytes; - while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE) - && (drv_data->rx < drv_data->rx_end)) { + while (read_SSSR_bits(drv_data, SSSR_RNE) && drv_data->rx < drv_data->rx_end) { pxa2xx_spi_read(drv_data, SSDR); drv_data->rx += n_bytes; } @@ -541,8 +540,7 @@ static int u8_writer(struct driver_data *drv_data) static int u8_reader(struct driver_data *drv_data) { - while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE) - && (drv_data->rx < drv_data->rx_end)) { + while (read_SSSR_bits(drv_data, SSSR_RNE) && drv_data->rx < drv_data->rx_end) { *(u8 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR); ++drv_data->rx; } @@ -564,8 +562,7 @@ static int u16_writer(struct driver_data *drv_data) static int u16_reader(struct driver_data *drv_data) { - while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE) - && (drv_data->rx < drv_data->rx_end)) { + while (read_SSSR_bits(drv_data, SSSR_RNE) && drv_data->rx < drv_data->rx_end) { *(u16 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR); drv_data->rx += 2; } @@ -587,8 +584,7 @@ static int u32_writer(struct driver_data *drv_data) static int u32_reader(struct driver_data *drv_data) { - while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE) - && (drv_data->rx < drv_data->rx_end)) { + while (read_SSSR_bits(drv_data, SSSR_RNE) && drv_data->rx < drv_data->rx_end) { *(u32 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR); drv_data->rx += 4; } @@ -618,47 +614,51 @@ static void reset_sccr1(struct driver_data *drv_data) pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg); } -static void int_error_stop(struct driver_data *drv_data, const char *msg) +static void int_stop_and_reset(struct driver_data *drv_data) { - /* Stop and reset SSP */ + /* Clear and disable interrupts */ write_SSSR_CS(drv_data, drv_data->clear_sr); reset_sccr1(drv_data); - if (!pxa25x_ssp_comp(drv_data)) - pxa2xx_spi_write(drv_data, SSTO, 0); + if (pxa25x_ssp_comp(drv_data)) + return; + + pxa2xx_spi_write(drv_data, SSTO, 0); +} + +static void int_error_stop(struct driver_data *drv_data, const char *msg, int err) +{ + int_stop_and_reset(drv_data); pxa2xx_spi_flush(drv_data); pxa2xx_spi_off(drv_data); - dev_err(&drv_data->pdev->dev, "%s\n", msg); + dev_err(drv_data->ssp->dev, "%s\n", msg); - drv_data->controller->cur_msg->status = -EIO; + drv_data->controller->cur_msg->status = err; spi_finalize_current_transfer(drv_data->controller); } static void int_transfer_complete(struct driver_data *drv_data) { - /* Clear and disable interrupts */ - write_SSSR_CS(drv_data, drv_data->clear_sr); - reset_sccr1(drv_data); - if (!pxa25x_ssp_comp(drv_data)) - pxa2xx_spi_write(drv_data, SSTO, 0); + int_stop_and_reset(drv_data); spi_finalize_current_transfer(drv_data->controller); } static irqreturn_t interrupt_transfer(struct driver_data *drv_data) { - u32 irq_mask = (pxa2xx_spi_read(drv_data, SSCR1) & SSCR1_TIE) ? - drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS; + u32 irq_status; - u32 irq_status = pxa2xx_spi_read(drv_data, SSSR) & irq_mask; + irq_status = read_SSSR_bits(drv_data, drv_data->mask_sr); + if (!(pxa2xx_spi_read(drv_data, SSCR1) & SSCR1_TIE)) + irq_status &= ~SSSR_TFS; if (irq_status & SSSR_ROR) { - int_error_stop(drv_data, "interrupt_transfer: fifo overrun"); + int_error_stop(drv_data, "interrupt_transfer: FIFO overrun", -EIO); return IRQ_HANDLED; } if (irq_status & SSSR_TUR) { - int_error_stop(drv_data, "interrupt_transfer: fifo underrun"); + int_error_stop(drv_data, "interrupt_transfer: FIFO underrun", -EIO); return IRQ_HANDLED; } @@ -670,7 +670,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data) } } - /* Drain rx fifo, Fill tx fifo and prevent overruns */ + /* Drain Rx FIFO, Fill Tx FIFO and prevent overruns */ do { if (drv_data->read(drv_data)) { int_transfer_complete(drv_data); @@ -691,8 +691,8 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data) sccr1_reg &= ~SSCR1_TIE; /* - * PXA25x_SSP has no timeout, set up rx threshould for the - * remaining RX bytes. + * PXA25x_SSP has no timeout, set up Rx threshold for + * the remaining Rx bytes. */ if (pxa25x_ssp_comp(drv_data)) { u32 rx_thre; @@ -725,14 +725,12 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data) static void handle_bad_msg(struct driver_data *drv_data) { pxa2xx_spi_off(drv_data); - pxa2xx_spi_write(drv_data, SSCR1, - pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1); + clear_SSCR1_bits(drv_data, drv_data->int_cr1); if (!pxa25x_ssp_comp(drv_data)) pxa2xx_spi_write(drv_data, SSTO, 0); write_SSSR_CS(drv_data, drv_data->clear_sr); - dev_err(&drv_data->pdev->dev, - "bad message state in interrupt handler\n"); + dev_err(drv_data->ssp->dev, "bad message state in interrupt handler\n"); } static irqreturn_t ssp_int(int irq, void *dev_id) @@ -748,7 +746,7 @@ static irqreturn_t ssp_int(int irq, void *dev_id) * the IRQ was not for us (we shouldn't be RPM suspended when the * interrupt is enabled). */ - if (pm_runtime_suspended(&drv_data->pdev->dev)) + if (pm_runtime_suspended(drv_data->ssp->dev)) return IRQ_NONE; /* @@ -916,7 +914,7 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) /* * Calculate the divisor for the SCR (Serial Clock Rate), avoiding - * that the SSP transmission rate can be greater than the device rate + * that the SSP transmission rate can be greater than the device rate. */ if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff; @@ -974,7 +972,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, /* Check if we can DMA this transfer */ if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { - /* reject already-mapped transfers; PIO won't always work */ + /* Reject already-mapped transfers; PIO won't always work */ if (message->is_dma_mapped || transfer->rx_dma || transfer->tx_dma) { dev_err(&spi->dev, @@ -983,10 +981,10 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, return -EINVAL; } - /* warn ... we force this to PIO mode */ + /* Warn ... we force this to PIO mode */ dev_warn_ratelimited(&spi->dev, - "DMA disabled for transfer length %ld greater than %d\n", - (long)transfer->len, MAX_DMA_LEN); + "DMA disabled for transfer length %u greater than %d\n", + transfer->len, MAX_DMA_LEN); } /* Setup the transfer state based on the type of transfer */ @@ -1028,8 +1026,8 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, u32_writer : null_writer; } /* - * if bits/word is changed in dma mode, then must check the - * thresholds and burst also + * If bits per word is changed in DMA mode, then must check + * the thresholds and burst also. */ if (chip->enable_dma) { if (pxa2xx_spi_set_dma_burst_and_threshold(chip, @@ -1080,47 +1078,45 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, dma_mapped ? "DMA" : "PIO"); if (is_lpss_ssp(drv_data)) { - if ((pxa2xx_spi_read(drv_data, SSIRF) & 0xff) - != chip->lpss_rx_threshold) - pxa2xx_spi_write(drv_data, SSIRF, - chip->lpss_rx_threshold); - if ((pxa2xx_spi_read(drv_data, SSITF) & 0xffff) - != chip->lpss_tx_threshold) - pxa2xx_spi_write(drv_data, SSITF, - chip->lpss_tx_threshold); + pxa2xx_spi_update(drv_data, SSIRF, GENMASK(7, 0), chip->lpss_rx_threshold); + pxa2xx_spi_update(drv_data, SSITF, GENMASK(15, 0), chip->lpss_tx_threshold); } - if (is_quark_x1000_ssp(drv_data) && - (pxa2xx_spi_read(drv_data, DDS_RATE) != chip->dds_rate)) - pxa2xx_spi_write(drv_data, DDS_RATE, chip->dds_rate); - - /* see if we need to reload the config registers */ - if ((pxa2xx_spi_read(drv_data, SSCR0) != cr0) - || (pxa2xx_spi_read(drv_data, SSCR1) & change_mask) - != (cr1 & change_mask)) { - /* stop the SSP, and update the other bits */ - if (!is_mmp2_ssp(drv_data)) - pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE); - if (!pxa25x_ssp_comp(drv_data)) - pxa2xx_spi_write(drv_data, SSTO, chip->timeout); - /* first set CR1 without interrupt and service enables */ - pxa2xx_spi_write(drv_data, SSCR1, cr1 & change_mask); - /* restart the SSP */ - pxa2xx_spi_write(drv_data, SSCR0, cr0); + if (is_mrfld_ssp(drv_data)) { + u32 mask = SFIFOTT_RFT | SFIFOTT_TFT; + u32 thresh = 0; - } else { - if (!pxa25x_ssp_comp(drv_data)) - pxa2xx_spi_write(drv_data, SSTO, chip->timeout); + thresh |= SFIFOTT_RxThresh(chip->lpss_rx_threshold); + thresh |= SFIFOTT_TxThresh(chip->lpss_tx_threshold); + + pxa2xx_spi_update(drv_data, SFIFOTT, mask, thresh); } + if (is_quark_x1000_ssp(drv_data)) + pxa2xx_spi_update(drv_data, DDS_RATE, GENMASK(23, 0), chip->dds_rate); + + /* Stop the SSP */ + if (!is_mmp2_ssp(drv_data)) + pxa_ssp_disable(drv_data->ssp); + + if (!pxa25x_ssp_comp(drv_data)) + pxa2xx_spi_write(drv_data, SSTO, chip->timeout); + + /* First set CR1 without interrupt and service enables */ + pxa2xx_spi_update(drv_data, SSCR1, change_mask, cr1); + + /* See if we need to reload the configuration registers */ + pxa2xx_spi_update(drv_data, SSCR0, GENMASK(31, 0), cr0); + + /* Restart the SSP */ + pxa_ssp_enable(drv_data->ssp); + if (is_mmp2_ssp(drv_data)) { - u8 tx_level = (pxa2xx_spi_read(drv_data, SSSR) - & SSSR_TFL_MASK) >> 8; + u8 tx_level = read_SSSR_bits(drv_data, SSSR_TFL_MASK) >> 8; if (tx_level) { - /* On MMP2, flipping SSE doesn't to empty TXFIFO. */ - dev_warn(&spi->dev, "%d bytes of garbage in TXFIFO!\n", - tx_level); + /* On MMP2, flipping SSE doesn't to empty Tx FIFO. */ + dev_warn(&spi->dev, "%u bytes of garbage in Tx FIFO!\n", tx_level); if (tx_level > transfer->len) tx_level = transfer->len; drv_data->tx += tx_level; @@ -1139,7 +1135,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, /* * Release the data by enabling service requests and interrupts, - * without changing any mode bits + * without changing any mode bits. */ pxa2xx_spi_write(drv_data, SSCR1, cr1); @@ -1150,18 +1146,7 @@ static int pxa2xx_spi_slave_abort(struct spi_controller *controller) { struct driver_data *drv_data = spi_controller_get_devdata(controller); - /* Stop and reset SSP */ - write_SSSR_CS(drv_data, drv_data->clear_sr); - reset_sccr1(drv_data); - if (!pxa25x_ssp_comp(drv_data)) - pxa2xx_spi_write(drv_data, SSTO, 0); - pxa2xx_spi_flush(drv_data); - pxa2xx_spi_off(drv_data); - - dev_dbg(&drv_data->pdev->dev, "transfer aborted\n"); - - drv_data->controller->cur_msg->status = -EINTR; - spi_finalize_current_transfer(drv_data->controller); + int_error_stop(drv_data, "transfer aborted", -EINTR); return 0; } @@ -1175,9 +1160,7 @@ static void pxa2xx_spi_handle_err(struct spi_controller *controller, pxa2xx_spi_off(drv_data); /* Clear and disable interrupts and service requests */ write_SSSR_CS(drv_data, drv_data->clear_sr); - pxa2xx_spi_write(drv_data, SSCR1, - pxa2xx_spi_read(drv_data, SSCR1) - & ~(drv_data->int_cr1 | drv_data->dma_cr1)); + clear_SSCR1_bits(drv_data, drv_data->int_cr1 | drv_data->dma_cr1); if (!pxa25x_ssp_comp(drv_data)) pxa2xx_spi_write(drv_data, SSTO, 0); @@ -1202,63 +1185,61 @@ static int pxa2xx_spi_unprepare_transfer(struct spi_controller *controller) return 0; } +static void cleanup_cs(struct spi_device *spi) +{ + if (!gpio_is_valid(spi->cs_gpio)) + return; + + gpio_free(spi->cs_gpio); + spi->cs_gpio = -ENOENT; +} + static int setup_cs(struct spi_device *spi, struct chip_data *chip, struct pxa2xx_spi_chip *chip_info) { - struct driver_data *drv_data = - spi_controller_get_devdata(spi->controller); - struct gpio_desc *gpiod; - int err = 0; + struct driver_data *drv_data = spi_controller_get_devdata(spi->controller); if (chip == NULL) return 0; - if (drv_data->cs_gpiods) { - gpiod = drv_data->cs_gpiods[spi->chip_select]; - if (gpiod) { - chip->gpiod_cs = gpiod; - chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH; - gpiod_set_value(gpiod, chip->gpio_cs_inverted); - } - + if (chip_info == NULL) return 0; - } - if (chip_info == NULL) + if (drv_data->ssp_type == CE4100_SSP) return 0; - /* NOTE: setup() can be called multiple times, possibly with - * different chip_info, release previously requested GPIO + /* + * NOTE: setup() can be called multiple times, possibly with + * different chip_info, release previously requested GPIO. */ - if (chip->gpiod_cs) { - gpiod_put(chip->gpiod_cs); - chip->gpiod_cs = NULL; - } + cleanup_cs(spi); - /* If (*cs_control) is provided, ignore GPIO chip select */ + /* If ->cs_control() is provided, ignore GPIO chip select */ if (chip_info->cs_control) { chip->cs_control = chip_info->cs_control; return 0; } if (gpio_is_valid(chip_info->gpio_cs)) { - err = gpio_request(chip_info->gpio_cs, "SPI_CS"); + int gpio = chip_info->gpio_cs; + int err; + + err = gpio_request(gpio, "SPI_CS"); if (err) { - dev_err(&spi->dev, "failed to request chip select GPIO%d\n", - chip_info->gpio_cs); + dev_err(&spi->dev, "failed to request chip select GPIO%d\n", gpio); return err; } - gpiod = gpio_to_desc(chip_info->gpio_cs); - chip->gpiod_cs = gpiod; - chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH; + err = gpio_direction_output(gpio, !(spi->mode & SPI_CS_HIGH)); + if (err) { + gpio_free(gpio); + return err; + } - err = gpiod_direction_output(gpiod, !chip->gpio_cs_inverted); - if (err) - gpiod_put(chip->gpiod_cs); + spi->cs_gpio = gpio; } - return err; + return 0; } static int setup(struct spi_device *spi) @@ -1277,6 +1258,11 @@ static int setup(struct spi_device *spi) tx_hi_thres = 0; rx_thres = RX_THRESH_QUARK_X1000_DFLT; break; + case MRFLD_SSP: + tx_thres = TX_THRESH_MRFLD_DFLT; + tx_hi_thres = 0; + rx_thres = RX_THRESH_MRFLD_DFLT; + break; case CE4100_SSP: tx_thres = TX_THRESH_CE4100_DFLT; tx_hi_thres = 0; @@ -1305,7 +1291,7 @@ static int setup(struct spi_device *spi) break; } - /* Only alloc on first setup */ + /* Only allocate on the first setup */ chip = spi_get_ctldata(spi); if (!chip) { chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); @@ -1319,15 +1305,15 @@ static int setup(struct spi_device *spi) kfree(chip); return -EINVAL; } - - chip->frm = spi->chip_select; } chip->enable_dma = drv_data->controller_info->enable_dma; chip->timeout = TIMOUT_DFLT; } - /* protocol drivers may change the chip settings, so... - * if chip_info exists, use it */ + /* + * Protocol drivers may change the chip settings, so... + * if chip_info exists, use it. + */ chip_info = spi->controller_data; /* chip_info isn't always needed */ @@ -1352,15 +1338,24 @@ static int setup(struct spi_device *spi) chip->cr1 |= SSCR1_SPH; } - chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres); - chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres) - | SSITF_TxHiThresh(tx_hi_thres); + if (is_lpss_ssp(drv_data)) { + chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres); + chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres) | + SSITF_TxHiThresh(tx_hi_thres); + } + + if (is_mrfld_ssp(drv_data)) { + chip->lpss_rx_threshold = rx_thres; + chip->lpss_tx_threshold = tx_thres; + } - /* set dma burst and threshold outside of chip_info path so that if - * chip_info goes away after setting chip->enable_dma, the - * burst and threshold can still respond to changes in bits_per_word */ + /* + * Set DMA burst and threshold outside of chip_info path so that if + * chip_info goes away after setting chip->enable_dma, the burst and + * threshold can still respond to changes in bits_per_word. + */ if (chip->enable_dma) { - /* set up legal burst and threshold for dma */ + /* Set up legal burst and threshold for DMA */ if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi, spi->bits_per_word, &chip->dma_burst_size, @@ -1391,8 +1386,8 @@ static int setup(struct spi_device *spi) } chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); - chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) - | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); + chip->cr1 |= ((spi->mode & SPI_CPHA) ? SSCR1_SPH : 0) | + ((spi->mode & SPI_CPOL) ? SSCR1_SPO : 0); if (spi->mode & SPI_LOOP) chip->cr1 |= SSCR1_LBM; @@ -1426,16 +1421,8 @@ static int setup(struct spi_device *spi) static void cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata(spi); - struct driver_data *drv_data = - spi_controller_get_devdata(spi->controller); - - if (!chip) - return; - - if (drv_data->ssp_type != CE4100_SSP && !drv_data->cs_gpiods && - chip->gpiod_cs) - gpiod_put(chip->gpiod_cs); + cleanup_cs(spi); kfree(chip); } @@ -1652,7 +1639,7 @@ static int pxa2xx_spi_fw_translate_cs(struct spi_controller *controller, { struct driver_data *drv_data = spi_controller_get_devdata(controller); - if (has_acpi_companion(&drv_data->pdev->dev)) { + if (has_acpi_companion(drv_data->ssp->dev)) { switch (drv_data->ssp_type) { /* * For Atoms the ACPI DeviceSelection used by the Windows @@ -1684,7 +1671,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) struct driver_data *drv_data; struct ssp_device *ssp; const struct lpss_config *config; - int status, count; + int status; u32 tmp; platform_info = dev_get_platdata(dev); @@ -1701,7 +1688,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) ssp = &platform_info->ssp; if (!ssp->mmio_base) { - dev_err(&pdev->dev, "failed to get ssp\n"); + dev_err(&pdev->dev, "failed to get SSP\n"); return -ENODEV; } @@ -1712,17 +1699,18 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) if (!controller) { dev_err(&pdev->dev, "cannot alloc spi_controller\n"); - pxa_ssp_free(ssp); - return -ENOMEM; + status = -ENOMEM; + goto out_error_controller_alloc; } drv_data = spi_controller_get_devdata(controller); drv_data->controller = controller; drv_data->controller_info = platform_info; - drv_data->pdev = pdev; drv_data->ssp = ssp; - controller->dev.of_node = pdev->dev.of_node; - /* the spi->mode bits understood by this driver: */ + controller->dev.of_node = dev->of_node; + controller->dev.fwnode = dev->fwnode; + + /* The spi->mode bits understood by this driver: */ controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; controller->bus_num = ssp->port_id; @@ -1740,8 +1728,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) drv_data->ssp_type = ssp->type; - drv_data->ioaddr = ssp->mmio_base; - drv_data->ssdr_physical = ssp->phys_base + SSDR; if (pxa25x_ssp_comp(drv_data)) { switch (drv_data->ssp_type) { case QUARK_X1000_SSP: @@ -1803,15 +1789,16 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) controller->min_speed_hz = DIV_ROUND_UP(controller->max_speed_hz, 512); + pxa_ssp_disable(ssp); + /* Load default SSP configuration */ - pxa2xx_spi_write(drv_data, SSCR0, 0); switch (drv_data->ssp_type) { case QUARK_X1000_SSP: tmp = QUARK_X1000_SSCR1_RxTresh(RX_THRESH_QUARK_X1000_DFLT) | QUARK_X1000_SSCR1_TxTresh(TX_THRESH_QUARK_X1000_DFLT); pxa2xx_spi_write(drv_data, SSCR1, tmp); - /* using the Motorola SPI protocol and use 8 bit frame */ + /* Using the Motorola SPI protocol and use 8 bit frame */ tmp = QUARK_X1000_SSCR0_Motorola | QUARK_X1000_SSCR0_DataSize(8); pxa2xx_spi_write(drv_data, SSCR0, tmp); break; @@ -1863,38 +1850,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) } } controller->num_chipselect = platform_info->num_chipselect; - - count = gpiod_count(&pdev->dev, "cs"); - if (count > 0) { - int i; - - controller->num_chipselect = max_t(int, count, - controller->num_chipselect); - - drv_data->cs_gpiods = devm_kcalloc(&pdev->dev, - controller->num_chipselect, sizeof(struct gpio_desc *), - GFP_KERNEL); - if (!drv_data->cs_gpiods) { - status = -ENOMEM; - goto out_error_clock_enabled; - } - - for (i = 0; i < controller->num_chipselect; i++) { - struct gpio_desc *gpiod; - - gpiod = devm_gpiod_get_index(dev, "cs", i, GPIOD_ASIS); - if (IS_ERR(gpiod)) { - /* Means use native chip select */ - if (PTR_ERR(gpiod) == -ENOENT) - continue; - - status = PTR_ERR(gpiod); - goto out_error_clock_enabled; - } else { - drv_data->cs_gpiods[i] = gpiod; - } - } - } + controller->use_gpio_descriptors = true; if (platform_info->is_slave) { drv_data->gpiod_ready = devm_gpiod_get_optional(dev, @@ -1913,8 +1869,8 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); status = spi_register_controller(controller); - if (status != 0) { - dev_err(&pdev->dev, "problem registering spi controller\n"); + if (status) { + dev_err(&pdev->dev, "problem registering SPI controller\n"); goto out_error_pm_runtime_enabled; } @@ -1945,7 +1901,7 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) spi_unregister_controller(drv_data->controller); /* Disable the SSP at the peripheral and SOC level */ - pxa2xx_spi_write(drv_data, SSCR0, 0); + pxa_ssp_disable(ssp); clk_disable_unprepare(ssp->clk); /* Release DMA */ @@ -1972,9 +1928,10 @@ static int pxa2xx_spi_suspend(struct device *dev) int status; status = spi_controller_suspend(drv_data->controller); - if (status != 0) + if (status) return status; - pxa2xx_spi_write(drv_data, SSCR0, 0); + + pxa_ssp_disable(ssp); if (!pm_runtime_suspended(dev)) clk_disable_unprepare(ssp->clk); diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 1400472bc986..9a20fb88e50f 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -1,28 +1,26 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs - * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2013, 2021 Intel Corporation */ #ifndef SPI_PXA2XX_H #define SPI_PXA2XX_H -#include <linux/atomic.h> -#include <linux/dmaengine.h> -#include <linux/errno.h> -#include <linux/io.h> #include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/pxa2xx_ssp.h> -#include <linux/scatterlist.h> +#include <linux/io.h> +#include <linux/types.h> #include <linux/sizes.h> -#include <linux/spi/spi.h> -#include <linux/spi/pxa2xx_spi.h> -struct driver_data { - /* Driver model hookup */ - struct platform_device *pdev; +#include <linux/pxa2xx_ssp.h> + +struct gpio_desc; +struct pxa2xx_spi_controller; +struct spi_controller; +struct spi_device; +struct spi_transfer; +struct driver_data { /* SSP Info */ struct ssp_device *ssp; @@ -33,10 +31,6 @@ struct driver_data { /* PXA hookup */ struct pxa2xx_spi_controller *controller_info; - /* SSP register addresses */ - void __iomem *ioaddr; - phys_addr_t ssdr_physical; - /* SSP masks*/ u32 dma_cr1; u32 int_cr1; @@ -59,9 +53,6 @@ struct driver_data { void __iomem *lpss_base; - /* GPIOs for chip selects */ - struct gpio_desc **cs_gpiods; - /* Optional slave FIFO ready signal */ struct gpio_desc *gpiod_ready; }; @@ -71,37 +62,32 @@ struct chip_data { u32 dds_rate; u32 timeout; u8 n_bytes; + u8 enable_dma; u32 dma_burst_size; - u32 threshold; u32 dma_threshold; + u32 threshold; u16 lpss_rx_threshold; u16 lpss_tx_threshold; - u8 enable_dma; - union { - struct gpio_desc *gpiod_cs; - unsigned int frm; - }; - int gpio_cs_inverted; + int (*write)(struct driver_data *drv_data); int (*read)(struct driver_data *drv_data); + void (*cs_control)(u32 command); }; -static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data, - unsigned reg) +static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data, u32 reg) { - return __raw_readl(drv_data->ioaddr + reg); + return pxa_ssp_read_reg(drv_data->ssp, reg); } -static inline void pxa2xx_spi_write(const struct driver_data *drv_data, - unsigned reg, u32 val) +static inline void pxa2xx_spi_write(const struct driver_data *drv_data, u32 reg, u32 val) { - __raw_writel(val, drv_data->ioaddr + reg); + pxa_ssp_write_reg(drv_data->ssp, reg, val); } #define DMA_ALIGNMENT 8 -static inline int pxa25x_ssp_comp(struct driver_data *drv_data) +static inline int pxa25x_ssp_comp(const struct driver_data *drv_data) { switch (drv_data->ssp_type) { case PXA25x_SSP: @@ -113,11 +99,21 @@ static inline int pxa25x_ssp_comp(struct driver_data *drv_data) } } -static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val) +static inline void clear_SSCR1_bits(const struct driver_data *drv_data, u32 bits) +{ + pxa2xx_spi_write(drv_data, SSCR1, pxa2xx_spi_read(drv_data, SSCR1) & ~bits); +} + +static inline u32 read_SSSR_bits(const struct driver_data *drv_data, u32 bits) +{ + return pxa2xx_spi_read(drv_data, SSSR) & bits; +} + +static inline void write_SSSR_CS(const struct driver_data *drv_data, u32 val) { if (drv_data->ssp_type == CE4100_SSP || drv_data->ssp_type == QUARK_X1000_SSP) - val |= pxa2xx_spi_read(drv_data, SSSR) & SSSR_ALT_FRM_MASK; + val |= read_SSSR_bits(drv_data, SSSR_ALT_FRM_MASK); pxa2xx_spi_write(drv_data, SSSR, val); } diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 52d6259d96ed..540861ca2ba3 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -107,6 +107,8 @@ #define CR0_OPM_MASTER 0x0 #define CR0_OPM_SLAVE 0x1 +#define CR0_SOI_OFFSET 23 + #define CR0_MTM_OFFSET 0x21 /* Bit fields in SER, 2bit */ @@ -116,13 +118,14 @@ #define BAUDR_SCKDV_MIN 2 #define BAUDR_SCKDV_MAX 65534 -/* Bit fields in SR, 5bit */ -#define SR_MASK 0x1f +/* Bit fields in SR, 6bit */ +#define SR_MASK 0x3f #define SR_BUSY (1 << 0) #define SR_TF_FULL (1 << 1) #define SR_TF_EMPTY (1 << 2) #define SR_RF_EMPTY (1 << 3) #define SR_RF_FULL (1 << 4) +#define SR_SLAVE_TX_BUSY (1 << 5) /* Bit fields in ISR, IMR, ISR, RISR, 5bit */ #define INT_MASK 0x1f @@ -156,7 +159,8 @@ */ #define ROCKCHIP_SPI_MAX_TRANLEN 0xffff -#define ROCKCHIP_SPI_MAX_CS_NUM 2 +/* 2 for native cs, 2 for cs-gpio */ +#define ROCKCHIP_SPI_MAX_CS_NUM 4 #define ROCKCHIP_SPI_VER2_TYPE1 0x05EC0002 #define ROCKCHIP_SPI_VER2_TYPE2 0x00110002 @@ -197,13 +201,19 @@ static inline void spi_enable_chip(struct rockchip_spi *rs, bool enable) writel_relaxed((enable ? 1U : 0U), rs->regs + ROCKCHIP_SPI_SSIENR); } -static inline void wait_for_idle(struct rockchip_spi *rs) +static inline void wait_for_tx_idle(struct rockchip_spi *rs, bool slave_mode) { unsigned long timeout = jiffies + msecs_to_jiffies(5); do { - if (!(readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)) - return; + if (slave_mode) { + if (!(readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_SLAVE_TX_BUSY) && + !((readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY))) + return; + } else { + if (!(readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)) + return; + } } while (!time_after(jiffies, timeout)); dev_warn(rs->dev, "spi controller is in busy state!\n"); @@ -228,7 +238,7 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) { struct spi_controller *ctlr = spi->controller; struct rockchip_spi *rs = spi_controller_get_devdata(ctlr); - bool cs_asserted = !enable; + bool cs_asserted = spi->mode & SPI_CS_HIGH ? enable : !enable; /* Return immediately for no-op */ if (cs_asserted == rs->cs_asserted[spi->chip_select]) @@ -238,11 +248,15 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) /* Keep things powered as long as CS is asserted */ pm_runtime_get_sync(rs->dev); - ROCKCHIP_SPI_SET_BITS(rs->regs + ROCKCHIP_SPI_SER, - BIT(spi->chip_select)); + if (spi->cs_gpiod) + ROCKCHIP_SPI_SET_BITS(rs->regs + ROCKCHIP_SPI_SER, 1); + else + ROCKCHIP_SPI_SET_BITS(rs->regs + ROCKCHIP_SPI_SER, BIT(spi->chip_select)); } else { - ROCKCHIP_SPI_CLR_BITS(rs->regs + ROCKCHIP_SPI_SER, - BIT(spi->chip_select)); + if (spi->cs_gpiod) + ROCKCHIP_SPI_CLR_BITS(rs->regs + ROCKCHIP_SPI_SER, 1); + else + ROCKCHIP_SPI_CLR_BITS(rs->regs + ROCKCHIP_SPI_SER, BIT(spi->chip_select)); /* Drop reference from when we first asserted CS */ pm_runtime_put(rs->dev); @@ -383,7 +397,7 @@ static void rockchip_spi_dma_txcb(void *data) return; /* Wait until the FIFO data completely. */ - wait_for_idle(rs); + wait_for_tx_idle(rs, ctlr->slave); spi_enable_chip(rs, false); spi_finalize_current_transfer(ctlr); @@ -495,6 +509,8 @@ static int rockchip_spi_config(struct rockchip_spi *rs, cr0 |= (spi->mode & 0x3U) << CR0_SCPH_OFFSET; if (spi->mode & SPI_LSB_FIRST) cr0 |= CR0_FBM_LSB << CR0_FBM_OFFSET; + if (spi->mode & SPI_CS_HIGH) + cr0 |= BIT(spi->chip_select) << CR0_SOI_OFFSET; if (xfer->rx_buf && xfer->tx_buf) cr0 |= CR0_XFM_TR << CR0_XFM_OFFSET; @@ -540,12 +556,12 @@ static int rockchip_spi_config(struct rockchip_spi *rs, * interrupt exactly when the fifo is full doesn't seem to work, * so we need the strict inequality here */ - if (xfer->len < rs->fifo_len) - writel_relaxed(xfer->len - 1, rs->regs + ROCKCHIP_SPI_RXFTLR); + if ((xfer->len / rs->n_bytes) < rs->fifo_len) + writel_relaxed(xfer->len / rs->n_bytes - 1, rs->regs + ROCKCHIP_SPI_RXFTLR); else writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR); - writel_relaxed(rs->fifo_len / 2, rs->regs + ROCKCHIP_SPI_DMATDLR); + writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_DMATDLR); writel_relaxed(rockchip_spi_calc_burst_size(xfer->len / rs->n_bytes) - 1, rs->regs + ROCKCHIP_SPI_DMARDLR); writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR); @@ -783,6 +799,14 @@ static int rockchip_spi_probe(struct platform_device *pdev) ctlr->can_dma = rockchip_spi_can_dma; } + switch (readl_relaxed(rs->regs + ROCKCHIP_SPI_VERSION)) { + case ROCKCHIP_SPI_VER2_TYPE2: + ctlr->mode_bits |= SPI_CS_HIGH; + break; + default: + break; + } + ret = devm_spi_register_controller(&pdev->dev, ctlr); if (ret < 0) { dev_err(&pdev->dev, "Failed to register controller\n"); @@ -922,6 +946,7 @@ static const struct of_device_id rockchip_spi_dt_match[] = { { .compatible = "rockchip,rk3368-spi", }, { .compatible = "rockchip,rk3399-spi", }, { .compatible = "rockchip,rv1108-spi", }, + { .compatible = "rockchip,rv1126-spi", }, { }, }; MODULE_DEVICE_TABLE(of, rockchip_spi_dt_match); diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index e39fd38f5180..d16ed88802d3 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -618,9 +618,9 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, ret = -ETIMEDOUT; } if (tx) - dmaengine_terminate_all(rspi->ctlr->dma_tx); + dmaengine_terminate_sync(rspi->ctlr->dma_tx); if (rx) - dmaengine_terminate_all(rspi->ctlr->dma_rx); + dmaengine_terminate_sync(rspi->ctlr->dma_rx); } rspi_disable_irq(rspi, irq_mask); @@ -634,7 +634,7 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, no_dma_tx: if (rx) - dmaengine_terminate_all(rspi->ctlr->dma_rx); + dmaengine_terminate_sync(rspi->ctlr->dma_rx); no_dma_rx: if (ret == -EAGAIN) { dev_warn_once(&rspi->ctlr->dev, diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 41ed9ff8fad0..f88d9acd20d9 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -853,10 +853,10 @@ stop_reset: sh_msiof_spi_stop(p, rx); stop_dma: if (tx) - dmaengine_terminate_all(p->ctlr->dma_tx); + dmaengine_terminate_sync(p->ctlr->dma_tx); no_dma_tx: if (rx) - dmaengine_terminate_all(p->ctlr->dma_rx); + dmaengine_terminate_sync(p->ctlr->dma_rx); sh_msiof_write(p, SIIER, 0); return ret; } diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index 594f64136208..27f35aa2d746 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -36,6 +36,7 @@ #define CR_FTIE BIT(18) #define CR_SMIE BIT(19) #define CR_TOIE BIT(20) +#define CR_APMS BIT(22) #define CR_PRESC_MASK GENMASK(31, 24) #define QSPI_DCR 0x04 @@ -53,6 +54,7 @@ #define QSPI_FCR 0x0c #define FCR_CTEF BIT(0) #define FCR_CTCF BIT(1) +#define FCR_CSMF BIT(3) #define QSPI_DLR 0x10 @@ -91,7 +93,6 @@ #define STM32_AUTOSUSPEND_DELAY -1 struct stm32_qspi_flash { - struct stm32_qspi *qspi; u32 cs; u32 presc; }; @@ -107,6 +108,7 @@ struct stm32_qspi { u32 clk_rate; struct stm32_qspi_flash flash[STM32_QSPI_MAX_NORCHIP]; struct completion data_completion; + struct completion match_completion; u32 fmode; struct dma_chan *dma_chtx; @@ -115,6 +117,7 @@ struct stm32_qspi { u32 cr_reg; u32 dcr_reg; + unsigned long status_timeout; /* * to protect device configuration, could be different between @@ -128,11 +131,20 @@ static irqreturn_t stm32_qspi_irq(int irq, void *dev_id) struct stm32_qspi *qspi = (struct stm32_qspi *)dev_id; u32 cr, sr; + cr = readl_relaxed(qspi->io_base + QSPI_CR); sr = readl_relaxed(qspi->io_base + QSPI_SR); + if (cr & CR_SMIE && sr & SR_SMF) { + /* disable irq */ + cr &= ~CR_SMIE; + writel_relaxed(cr, qspi->io_base + QSPI_CR); + complete(&qspi->match_completion); + + return IRQ_HANDLED; + } + if (sr & (SR_TEF | SR_TCF)) { /* disable irq */ - cr = readl_relaxed(qspi->io_base + QSPI_CR); cr &= ~CR_TCIE & ~CR_TEIE; writel_relaxed(cr, qspi->io_base + QSPI_CR); complete(&qspi->data_completion); @@ -322,6 +334,24 @@ wait_nobusy: return err; } +static int stm32_qspi_wait_poll_status(struct stm32_qspi *qspi, + const struct spi_mem_op *op) +{ + u32 cr; + + reinit_completion(&qspi->match_completion); + cr = readl_relaxed(qspi->io_base + QSPI_CR); + writel_relaxed(cr | CR_SMIE, qspi->io_base + QSPI_CR); + + if (!wait_for_completion_timeout(&qspi->match_completion, + msecs_to_jiffies(qspi->status_timeout))) + return -ETIMEDOUT; + + writel_relaxed(FCR_CSMF, qspi->io_base + QSPI_FCR); + + return 0; +} + static int stm32_qspi_get_mode(struct stm32_qspi *qspi, u8 buswidth) { if (buswidth == 4) @@ -335,7 +365,7 @@ static int stm32_qspi_send(struct spi_mem *mem, const struct spi_mem_op *op) struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master); struct stm32_qspi_flash *flash = &qspi->flash[mem->spi->chip_select]; u32 ccr, cr; - int timeout, err = 0; + int timeout, err = 0, err_poll_status = 0; dev_dbg(qspi->dev, "cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n", op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, @@ -381,6 +411,9 @@ static int stm32_qspi_send(struct spi_mem *mem, const struct spi_mem_op *op) if (op->addr.nbytes && qspi->fmode != CCR_FMODE_MM) writel_relaxed(op->addr.val, qspi->io_base + QSPI_AR); + if (qspi->fmode == CCR_FMODE_APM) + err_poll_status = stm32_qspi_wait_poll_status(qspi, op); + err = stm32_qspi_tx(qspi, op); /* @@ -390,7 +423,7 @@ static int stm32_qspi_send(struct spi_mem *mem, const struct spi_mem_op *op) * byte of device (device size - fifo size). like device size is not * knows, the prefetching is always stop. */ - if (err || qspi->fmode == CCR_FMODE_MM) + if (err || err_poll_status || qspi->fmode == CCR_FMODE_MM) goto abort; /* wait end of tx in indirect mode */ @@ -409,15 +442,49 @@ abort: cr, !(cr & CR_ABORT), 1, STM32_ABT_TIMEOUT_US); - writel_relaxed(FCR_CTCF, qspi->io_base + QSPI_FCR); + writel_relaxed(FCR_CTCF | FCR_CSMF, qspi->io_base + QSPI_FCR); - if (err || timeout) - dev_err(qspi->dev, "%s err:%d abort timeout:%d\n", - __func__, err, timeout); + if (err || err_poll_status || timeout) + dev_err(qspi->dev, "%s err:%d err_poll_status:%d abort timeout:%d\n", + __func__, err, err_poll_status, timeout); return err; } +static int stm32_qspi_poll_status(struct spi_mem *mem, const struct spi_mem_op *op, + u16 mask, u16 match, + unsigned long initial_delay_us, + unsigned long polling_rate_us, + unsigned long timeout_ms) +{ + struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master); + int ret; + + if (!spi_mem_supports_op(mem, op)) + return -EOPNOTSUPP; + + ret = pm_runtime_get_sync(qspi->dev); + if (ret < 0) { + pm_runtime_put_noidle(qspi->dev); + return ret; + } + + mutex_lock(&qspi->lock); + + writel_relaxed(mask, qspi->io_base + QSPI_PSMKR); + writel_relaxed(match, qspi->io_base + QSPI_PSMAR); + qspi->fmode = CCR_FMODE_APM; + qspi->status_timeout = timeout_ms; + + ret = stm32_qspi_send(mem, op); + mutex_unlock(&qspi->lock); + + pm_runtime_mark_last_busy(qspi->dev); + pm_runtime_put_autosuspend(qspi->dev); + + return ret; +} + static int stm32_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master); @@ -525,12 +592,11 @@ static int stm32_qspi_setup(struct spi_device *spi) presc = DIV_ROUND_UP(qspi->clk_rate, spi->max_speed_hz) - 1; flash = &qspi->flash[spi->chip_select]; - flash->qspi = qspi; flash->cs = spi->chip_select; flash->presc = presc; mutex_lock(&qspi->lock); - qspi->cr_reg = 3 << CR_FTHRES_SHIFT | CR_SSHIFT | CR_EN; + qspi->cr_reg = CR_APMS | 3 << CR_FTHRES_SHIFT | CR_SSHIFT | CR_EN; writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR); /* set dcr fsize to max address */ @@ -610,6 +676,7 @@ static const struct spi_controller_mem_ops stm32_qspi_mem_ops = { .exec_op = stm32_qspi_exec_op, .dirmap_create = stm32_qspi_dirmap_create, .dirmap_read = stm32_qspi_dirmap_read, + .poll_status = stm32_qspi_poll_status, }; static int stm32_qspi_probe(struct platform_device *pdev) @@ -664,6 +731,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) } init_completion(&qspi->data_completion); + init_completion(&qspi->match_completion); qspi->clk = devm_clk_get(dev, NULL); if (IS_ERR(qspi->clk)) { diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index a2e5907276e7..5131141bbf0d 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -1071,8 +1071,7 @@ static int tegra_spi_transfer_one_message(struct spi_master *master, ret = wait_for_completion_timeout(&tspi->xfer_completion, SPI_DMA_TIMEOUT); if (WARN_ON(ret == 0)) { - dev_err(tspi->dev, - "spi transfer timeout, err %d\n", ret); + dev_err(tspi->dev, "spi transfer timeout\n"); if (tspi->is_curr_dma_xfer && (tspi->cur_direction & DATA_DIR_TX)) dmaengine_terminate_all(tspi->tx_dma_chan); diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c index 2f806f4b2c34..2354ca1e3858 100644 --- a/drivers/spi/spi-tegra210-quad.c +++ b/drivers/spi/spi-tegra210-quad.c @@ -1028,7 +1028,7 @@ static int tegra_qspi_transfer_one_message(struct spi_master *master, struct spi ret = wait_for_completion_timeout(&tqspi->xfer_completion, QSPI_DMA_TIMEOUT); if (WARN_ON(ret == 0)) { - dev_err(tqspi->dev, "transfer timeout: %d\n", ret); + dev_err(tqspi->dev, "transfer timeout\n"); if (tqspi->is_curr_dma_xfer && (tqspi->cur_direction & DATA_DIR_TX)) dmaengine_terminate_all(tqspi->tx_dma_chan); if (tqspi->is_curr_dma_xfer && (tqspi->cur_direction & DATA_DIR_RX)) diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index b8870784fc6e..8c4615b76339 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -580,8 +580,10 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw) data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); if (data->pkt_tx_buff != NULL) { data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); - if (!data->pkt_rx_buff) + if (!data->pkt_rx_buff) { kfree(data->pkt_tx_buff); + data->pkt_tx_buff = NULL; + } } if (!data->pkt_rx_buff) { diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c index 6a9ef8ee3cc9..8900e51e1a1c 100644 --- a/drivers/spi/spi-uniphier.c +++ b/drivers/spi/spi-uniphier.c @@ -142,7 +142,7 @@ static void uniphier_spi_set_mode(struct spi_device *spi) * FSTRT start frame timing * 0: rising edge of clock, 1: falling edge of clock */ - switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { + switch (spi->mode & SPI_MODE_X_MASK) { case SPI_MODE_0: /* CKPHS=1, CKINIT=0, CKDLY=1, FSTRT=0 */ val1 = SSI_CKS_CKPHS | SSI_CKS_CKDLY; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 56c173869d97..c99181165321 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -363,6 +363,10 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) const struct spi_device *spi = to_spi_device(dev); int rc; + rc = of_device_uevent_modalias(dev, env); + if (rc != -ENODEV) + return rc; + rc = acpi_device_uevent_modalias(dev, env); if (rc != -ENODEV) return rc; @@ -560,49 +564,23 @@ static void spi_cleanup(struct spi_device *spi) spi->controller->cleanup(spi); } -/** - * spi_add_device - Add spi_device allocated with spi_alloc_device - * @spi: spi_device to register - * - * Companion function to spi_alloc_device. Devices allocated with - * spi_alloc_device can be added onto the spi bus with this function. - * - * Return: 0 on success; negative errno on failure - */ -int spi_add_device(struct spi_device *spi) +static int __spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; int status; - /* Chipselects are numbered 0..max; validate. */ - if (spi->chip_select >= ctlr->num_chipselect) { - dev_err(dev, "cs%d >= max %d\n", spi->chip_select, - ctlr->num_chipselect); - return -EINVAL; - } - - /* Set the bus ID string */ - spi_dev_set_name(spi); - - /* We need to make sure there's no other device with this - * chipselect **BEFORE** we call setup(), else we'll trash - * its configuration. Lock against concurrent add() calls. - */ - mutex_lock(&spi_add_lock); - status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check); if (status) { dev_err(dev, "chipselect %d already in use\n", spi->chip_select); - goto done; + return status; } /* Controller may unregister concurrently */ if (IS_ENABLED(CONFIG_SPI_DYNAMIC) && !device_is_registered(&ctlr->dev)) { - status = -ENODEV; - goto done; + return -ENODEV; } /* Descriptors take precedence */ @@ -619,7 +597,7 @@ int spi_add_device(struct spi_device *spi) if (status < 0) { dev_err(dev, "can't setup %s, status %d\n", dev_name(&spi->dev), status); - goto done; + return status; } /* Device may be bound to an active driver when this returns */ @@ -632,12 +610,64 @@ int spi_add_device(struct spi_device *spi) dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev)); } -done: + return status; +} + +/** + * spi_add_device - Add spi_device allocated with spi_alloc_device + * @spi: spi_device to register + * + * Companion function to spi_alloc_device. Devices allocated with + * spi_alloc_device can be added onto the spi bus with this function. + * + * Return: 0 on success; negative errno on failure + */ +int spi_add_device(struct spi_device *spi) +{ + struct spi_controller *ctlr = spi->controller; + struct device *dev = ctlr->dev.parent; + int status; + + /* Chipselects are numbered 0..max; validate. */ + if (spi->chip_select >= ctlr->num_chipselect) { + dev_err(dev, "cs%d >= max %d\n", spi->chip_select, + ctlr->num_chipselect); + return -EINVAL; + } + + /* Set the bus ID string */ + spi_dev_set_name(spi); + + /* We need to make sure there's no other device with this + * chipselect **BEFORE** we call setup(), else we'll trash + * its configuration. Lock against concurrent add() calls. + */ + mutex_lock(&spi_add_lock); + status = __spi_add_device(spi); mutex_unlock(&spi_add_lock); return status; } EXPORT_SYMBOL_GPL(spi_add_device); +static int spi_add_device_locked(struct spi_device *spi) +{ + struct spi_controller *ctlr = spi->controller; + struct device *dev = ctlr->dev.parent; + + /* Chipselects are numbered 0..max; validate. */ + if (spi->chip_select >= ctlr->num_chipselect) { + dev_err(dev, "cs%d >= max %d\n", spi->chip_select, + ctlr->num_chipselect); + return -EINVAL; + } + + /* Set the bus ID string */ + spi_dev_set_name(spi); + + WARN_ON(!mutex_is_locked(&spi_add_lock)); + return __spi_add_device(spi); +} + /** * spi_new_device - instantiate one new SPI device * @ctlr: Controller to which device is connected @@ -804,6 +834,8 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) (spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH))) return; + trace_spi_set_cs(spi, activate); + spi->controller->last_cs_enable = enable; spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; @@ -961,11 +993,15 @@ static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg) if (ctlr->dma_tx) tx_dev = ctlr->dma_tx->device->dev; + else if (ctlr->dma_map_dev) + tx_dev = ctlr->dma_map_dev; else tx_dev = ctlr->dev.parent; if (ctlr->dma_rx) rx_dev = ctlr->dma_rx->device->dev; + else if (ctlr->dma_map_dev) + rx_dev = ctlr->dma_map_dev; else rx_dev = ctlr->dev.parent; @@ -1132,10 +1168,20 @@ static int spi_transfer_wait(struct spi_controller *ctlr, if (!speed_hz) speed_hz = 100000; - ms = 8LL * 1000LL * xfer->len; + /* + * For each byte we wait for 8 cycles of the SPI clock. + * Since speed is defined in Hz and we want milliseconds, + * use respective multiplier, but before the division, + * otherwise we may get 0 for short transfers. + */ + ms = 8LL * MSEC_PER_SEC * xfer->len; do_div(ms, speed_hz); - ms += ms + 200; /* some tolerance */ + /* + * Increase it twice and add 200 ms tolerance, use + * predefined maximum in case of overflow. + */ + ms += ms + 200; if (ms > UINT_MAX) ms = UINT_MAX; @@ -1158,10 +1204,10 @@ static void _spi_transfer_delay_ns(u32 ns) { if (!ns) return; - if (ns <= 1000) { + if (ns <= NSEC_PER_USEC) { ndelay(ns); } else { - u32 us = DIV_ROUND_UP(ns, 1000); + u32 us = DIV_ROUND_UP(ns, NSEC_PER_USEC); if (us <= 10) udelay(us); @@ -1181,21 +1227,25 @@ int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer) switch (unit) { case SPI_DELAY_UNIT_USECS: - delay *= 1000; + delay *= NSEC_PER_USEC; break; - case SPI_DELAY_UNIT_NSECS: /* nothing to do here */ + case SPI_DELAY_UNIT_NSECS: + /* Nothing to do here */ break; case SPI_DELAY_UNIT_SCK: /* clock cycles need to be obtained from spi_transfer */ if (!xfer) return -EINVAL; - /* if there is no effective speed know, then approximate - * by underestimating with half the requested hz + /* + * If there is unknown effective speed, approximate it + * by underestimating with half of the requested hz. */ hz = xfer->effective_speed_hz ?: xfer->speed_hz / 2; if (!hz) return -EINVAL; - delay *= DIV_ROUND_UP(1000000000, hz); + + /* Convert delay to nanoseconds */ + delay *= DIV_ROUND_UP(NSEC_PER_SEC, hz); break; default: return -EINVAL; @@ -1227,6 +1277,7 @@ EXPORT_SYMBOL_GPL(spi_delay_exec); static void _spi_transfer_cs_change_delay(struct spi_message *msg, struct spi_transfer *xfer) { + u32 default_delay_ns = 10 * NSEC_PER_USEC; u32 delay = xfer->cs_change_delay.value; u32 unit = xfer->cs_change_delay.unit; int ret; @@ -1234,16 +1285,16 @@ static void _spi_transfer_cs_change_delay(struct spi_message *msg, /* return early on "fast" mode - for everything but USECS */ if (!delay) { if (unit == SPI_DELAY_UNIT_USECS) - _spi_transfer_delay_ns(10000); + _spi_transfer_delay_ns(default_delay_ns); return; } ret = spi_delay_exec(&xfer->cs_change_delay, xfer); if (ret) { dev_err_once(&msg->spi->dev, - "Use of unsupported delay unit %i, using default of 10us\n", - unit); - _spi_transfer_delay_ns(10000); + "Use of unsupported delay unit %i, using default of %luus\n", + unit, default_delay_ns / NSEC_PER_USEC); + _spi_transfer_delay_ns(default_delay_ns); } } @@ -2105,6 +2156,55 @@ static void of_register_spi_devices(struct spi_controller *ctlr) static void of_register_spi_devices(struct spi_controller *ctlr) { } #endif +/** + * spi_new_ancillary_device() - Register ancillary SPI device + * @spi: Pointer to the main SPI device registering the ancillary device + * @chip_select: Chip Select of the ancillary device + * + * Register an ancillary SPI device; for example some chips have a chip-select + * for normal device usage and another one for setup/firmware upload. + * + * This may only be called from main SPI device's probe routine. + * + * Return: 0 on success; negative errno on failure + */ +struct spi_device *spi_new_ancillary_device(struct spi_device *spi, + u8 chip_select) +{ + struct spi_device *ancillary; + int rc = 0; + + /* Alloc an spi_device */ + ancillary = spi_alloc_device(spi->controller); + if (!ancillary) { + rc = -ENOMEM; + goto err_out; + } + + strlcpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias)); + + /* Use provided chip-select for ancillary device */ + ancillary->chip_select = chip_select; + + /* Take over SPI mode/speed from SPI main device */ + ancillary->max_speed_hz = spi->max_speed_hz; + ancillary->mode = spi->mode; + + /* Register the new device */ + rc = spi_add_device_locked(ancillary); + if (rc) { + dev_err(&spi->dev, "failed to register ancillary device\n"); + goto err_out; + } + + return ancillary; + +err_out: + spi_dev_put(ancillary); + return ERR_PTR(rc); +} +EXPORT_SYMBOL_GPL(spi_new_ancillary_device); + #ifdef CONFIG_ACPI struct acpi_spi_lookup { struct spi_controller *ctlr; @@ -3442,8 +3542,10 @@ int spi_setup(struct spi_device *spi) spi_set_thread_rt(spi->controller); } - dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n", - (int) (spi->mode & (SPI_CPOL | SPI_CPHA)), + trace_spi_setup(spi, status); + + dev_dbg(&spi->dev, "setup mode %lu, %s%s%s%s%u bits/w, %u Hz max --> %d\n", + spi->mode & SPI_MODE_X_MASK, (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "", (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "", (spi->mode & SPI_3WIRE) ? "3wire, " : "", @@ -3455,79 +3557,6 @@ int spi_setup(struct spi_device *spi) } EXPORT_SYMBOL_GPL(spi_setup); -/** - * spi_set_cs_timing - configure CS setup, hold, and inactive delays - * @spi: the device that requires specific CS timing configuration - * @setup: CS setup time specified via @spi_delay - * @hold: CS hold time specified via @spi_delay - * @inactive: CS inactive delay between transfers specified via @spi_delay - * - * Return: zero on success, else a negative error code. - */ -int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup, - struct spi_delay *hold, struct spi_delay *inactive) -{ - struct device *parent = spi->controller->dev.parent; - size_t len; - int status; - - if (spi->controller->set_cs_timing && - !(spi->cs_gpiod || gpio_is_valid(spi->cs_gpio))) { - mutex_lock(&spi->controller->io_mutex); - - if (spi->controller->auto_runtime_pm) { - status = pm_runtime_get_sync(parent); - if (status < 0) { - mutex_unlock(&spi->controller->io_mutex); - pm_runtime_put_noidle(parent); - dev_err(&spi->controller->dev, "Failed to power device: %d\n", - status); - return status; - } - - status = spi->controller->set_cs_timing(spi, setup, - hold, inactive); - pm_runtime_mark_last_busy(parent); - pm_runtime_put_autosuspend(parent); - } else { - status = spi->controller->set_cs_timing(spi, setup, hold, - inactive); - } - - mutex_unlock(&spi->controller->io_mutex); - return status; - } - - if ((setup && setup->unit == SPI_DELAY_UNIT_SCK) || - (hold && hold->unit == SPI_DELAY_UNIT_SCK) || - (inactive && inactive->unit == SPI_DELAY_UNIT_SCK)) { - dev_err(&spi->dev, - "Clock-cycle delays for CS not supported in SW mode\n"); - return -ENOTSUPP; - } - - len = sizeof(struct spi_delay); - - /* copy delays to controller */ - if (setup) - memcpy(&spi->controller->cs_setup, setup, len); - else - memset(&spi->controller->cs_setup, 0, len); - - if (hold) - memcpy(&spi->controller->cs_hold, hold, len); - else - memset(&spi->controller->cs_hold, 0, len); - - if (inactive) - memcpy(&spi->controller->cs_inactive, inactive, len); - else - memset(&spi->controller->cs_inactive, 0, len); - - return 0; -} -EXPORT_SYMBOL_GPL(spi_set_cs_timing); - static int _spi_xfer_word_delay_update(struct spi_transfer *xfer, struct spi_device *spi) { diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index f56e0e975a46..24e9469ea35b 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -59,7 +59,7 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS); * * REVISIT should changing those flags be privileged? */ -#define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \ +#define SPI_MODE_MASK (SPI_MODE_X_MASK | SPI_CS_HIGH \ | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \ | SPI_NO_CS | SPI_READY | SPI_TX_DUAL \ | SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL \ |