spmi: hisi-spmi-controller: move driver from staging

The Hisilicon 6421v600 SPMI driver is ready for mainstream.

So, move it from staging.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/35b9f9169889c1f4d51eff8bf2035450c9e02576.1624606660.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 367 deletions

diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c b/drivers/staging/hikey9xx/hisi-spmi-controller.c
deleted file mode 100644
index 5bd23262abd6..000000000000
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-/*
- * SPMI register addr
- */
-#define SPMI_CHANNEL_OFFSET				0x0300
-#define SPMI_SLAVE_OFFSET				0x20
-
-#define SPMI_APB_SPMI_CMD_BASE_ADDR			0x0100
-
-#define SPMI_APB_SPMI_WDATA0_BASE_ADDR			0x0104
-#define SPMI_APB_SPMI_WDATA1_BASE_ADDR			0x0108
-#define SPMI_APB_SPMI_WDATA2_BASE_ADDR			0x010c
-#define SPMI_APB_SPMI_WDATA3_BASE_ADDR			0x0110
-
-#define SPMI_APB_SPMI_STATUS_BASE_ADDR			0x0200
-
-#define SPMI_APB_SPMI_RDATA0_BASE_ADDR			0x0204
-#define SPMI_APB_SPMI_RDATA1_BASE_ADDR			0x0208
-#define SPMI_APB_SPMI_RDATA2_BASE_ADDR			0x020c
-#define SPMI_APB_SPMI_RDATA3_BASE_ADDR			0x0210
-
-#define SPMI_PER_DATAREG_BYTE				4
-/*
- * SPMI cmd register
- */
-#define SPMI_APB_SPMI_CMD_EN				BIT(31)
-#define SPMI_APB_SPMI_CMD_TYPE_OFFSET			24
-#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET			20
-#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET		16
-#define SPMI_APB_SPMI_CMD_ADDR_OFFSET			0
-
-/* Command Opcodes */
-
-enum spmi_controller_cmd_op_code {
-	SPMI_CMD_REG_ZERO_WRITE = 0,
-	SPMI_CMD_REG_WRITE = 1,
-	SPMI_CMD_REG_READ = 2,
-	SPMI_CMD_EXT_REG_WRITE = 3,
-	SPMI_CMD_EXT_REG_READ = 4,
-	SPMI_CMD_EXT_REG_WRITE_L = 5,
-	SPMI_CMD_EXT_REG_READ_L = 6,
-	SPMI_CMD_REG_RESET = 7,
-	SPMI_CMD_REG_SLEEP = 8,
-	SPMI_CMD_REG_SHUTDOWN = 9,
-	SPMI_CMD_REG_WAKEUP = 10,
-};
-
-/*
- * SPMI status register
- */
-#define SPMI_APB_TRANS_DONE			BIT(0)
-#define SPMI_APB_TRANS_FAIL			BIT(2)
-
-/* Command register fields */
-#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT	16
-
-/* Maximum number of support PMIC peripherals */
-#define SPMI_CONTROLLER_TIMEOUT_US		1000
-#define SPMI_CONTROLLER_MAX_TRANS_BYTES		16
-
-struct spmi_controller_dev {
-	struct spmi_controller	*controller;
-	struct device		*dev;
-	void __iomem		*base;
-	spinlock_t		lock;
-	u32			channel;
-};
-
-static int spmi_controller_wait_for_done(struct device *dev,
-					 struct spmi_controller_dev *ctrl_dev,
-					 void __iomem *base, u8 sid, u16 addr)
-{
-	u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
-	u32 status, offset;
-
-	offset  = SPMI_APB_SPMI_STATUS_BASE_ADDR;
-	offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
-
-	do {
-		status = readl(base + offset);
-
-		if (status & SPMI_APB_TRANS_DONE) {
-			if (status & SPMI_APB_TRANS_FAIL) {
-				dev_err(dev, "%s: transaction failed (0x%x)\n",
-					__func__, status);
-				return -EIO;
-			}
-			dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
-			return 0;
-		}
-		udelay(1);
-	} while (timeout--);
-
-	dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
-	return -ETIMEDOUT;
-}
-
-static int spmi_read_cmd(struct spmi_controller *ctrl,
-			 u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc)
-{
-	struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
-	u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
-	unsigned long flags;
-	u8 *buf = __buf;
-	u32 cmd, data;
-	int rc;
-	u8 op_code, i;
-
-	if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
-		dev_err(&ctrl->dev,
-			"spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
-			SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
-		return  -EINVAL;
-	}
-
-	switch (opc) {
-	case SPMI_CMD_READ:
-		op_code = SPMI_CMD_REG_READ;
-		break;
-	case SPMI_CMD_EXT_READ:
-		op_code = SPMI_CMD_EXT_REG_READ;
-		break;
-	case SPMI_CMD_EXT_READL:
-		op_code = SPMI_CMD_EXT_REG_READ_L;
-		break;
-	default:
-		dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc);
-		return -EINVAL;
-	}
-
-	cmd = SPMI_APB_SPMI_CMD_EN |
-	     (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
-	     ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
-	     ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |  /* slvid */
-	     ((slave_addr & 0xffff)  << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
-
-	spin_lock_irqsave(&spmi_controller->lock, flags);
-
-	writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
-
-	rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
-					   spmi_controller->base, slave_id, slave_addr);
-	if (rc)
-		goto done;
-
-	for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
-		data = readl(spmi_controller->base + chnl_ofst +
-			     SPMI_SLAVE_OFFSET * slave_id +
-			     SPMI_APB_SPMI_RDATA0_BASE_ADDR +
-			     i * SPMI_PER_DATAREG_BYTE);
-		data = be32_to_cpu((__be32 __force)data);
-		if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
-			memcpy(buf, &data, sizeof(data));
-			buf += sizeof(data);
-		} else {
-			memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
-			buf += (bc % SPMI_PER_DATAREG_BYTE);
-		}
-	}
-
-done:
-	spin_unlock_irqrestore(&spmi_controller->lock, flags);
-	if (rc)
-		dev_err(&ctrl->dev,
-			"spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
-			opc, slave_id, slave_addr, bc + 1);
-	else
-		dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n",
-			__func__, slave_id, slave_addr, (int)bc, __buf);
-
-	return rc;
-}
-
-static int spmi_write_cmd(struct spmi_controller *ctrl,
-			  u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc)
-{
-	struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
-	u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
-	const u8 *buf = __buf;
-	unsigned long flags;
-	u32 cmd, data;
-	int rc;
-	u8 op_code, i;
-
-	if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
-		dev_err(&ctrl->dev,
-			"spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
-			SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
-		return  -EINVAL;
-	}
-
-	switch (opc) {
-	case SPMI_CMD_WRITE:
-		op_code = SPMI_CMD_REG_WRITE;
-		break;
-	case SPMI_CMD_EXT_WRITE:
-		op_code = SPMI_CMD_EXT_REG_WRITE;
-		break;
-	case SPMI_CMD_EXT_WRITEL:
-		op_code = SPMI_CMD_EXT_REG_WRITE_L;
-		break;
-	default:
-		dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc);
-		return -EINVAL;
-	}
-
-	cmd = SPMI_APB_SPMI_CMD_EN |
-	      (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
-	      ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
-	      ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
-	      ((slave_addr & 0xffff)  << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
-
-	/* Write data to FIFOs */
-	spin_lock_irqsave(&spmi_controller->lock, flags);
-
-	for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
-		data = 0;
-		if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
-			memcpy(&data, buf, sizeof(data));
-			buf += sizeof(data);
-		} else {
-			memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
-			buf += (bc % SPMI_PER_DATAREG_BYTE);
-		}
-
-		writel((u32 __force)cpu_to_be32(data),
-		       spmi_controller->base + chnl_ofst +
-		       SPMI_APB_SPMI_WDATA0_BASE_ADDR +
-		       SPMI_PER_DATAREG_BYTE * i);
-	}
-
-	/* Start the transaction */
-	writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
-
-	rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
-					   spmi_controller->base, slave_id,
-					   slave_addr);
-	spin_unlock_irqrestore(&spmi_controller->lock, flags);
-
-	if (rc)
-		dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
-			opc, slave_id, slave_addr, bc);
-	else
-		dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n",
-			__func__, slave_id, slave_addr, (int)bc, __buf);
-
-	return rc;
-}
-
-static int spmi_controller_probe(struct platform_device *pdev)
-{
-	struct spmi_controller_dev *spmi_controller;
-	struct spmi_controller *ctrl;
-	struct resource *iores;
-	int ret;
-
-	ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
-	if (!ctrl) {
-		dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
-		return -ENOMEM;
-	}
-	spmi_controller = spmi_controller_get_drvdata(ctrl);
-	spmi_controller->controller = ctrl;
-
-	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iores) {
-		dev_err(&pdev->dev, "can not get resource!\n");
-		ret = -EINVAL;
-		goto err_put_controller;
-	}
-
-	spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
-					     resource_size(iores));
-	if (!spmi_controller->base) {
-		dev_err(&pdev->dev, "can not remap base addr!\n");
-		ret = -EADDRNOTAVAIL;
-		goto err_put_controller;
-	}
-
-	ret = of_property_read_u32(pdev->dev.of_node, "hisilicon,spmi-channel",
-				   &spmi_controller->channel);
-	if (ret) {
-		dev_err(&pdev->dev, "can not get channel\n");
-		ret = -ENODEV;
-		goto err_put_controller;
-	}
-
-	platform_set_drvdata(pdev, spmi_controller);
-	dev_set_drvdata(&ctrl->dev, spmi_controller);
-
-	spin_lock_init(&spmi_controller->lock);
-
-	ctrl->nr = spmi_controller->channel;
-	ctrl->dev.parent = pdev->dev.parent;
-	ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
-
-	/* Callbacks */
-	ctrl->read_cmd = spmi_read_cmd;
-	ctrl->write_cmd = spmi_write_cmd;
-
-	ret = spmi_controller_add(ctrl);
-	if (ret) {
-		dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret);
-		goto err_put_controller;
-	}
-
-	return 0;
-
-err_put_controller:
-	spmi_controller_put(ctrl);
-	return ret;
-}
-
-static int spmi_del_controller(struct platform_device *pdev)
-{
-	struct spmi_controller *ctrl = platform_get_drvdata(pdev);
-
-	spmi_controller_remove(ctrl);
-	spmi_controller_put(ctrl);
-	return 0;
-}
-
-static const struct of_device_id spmi_controller_match_table[] = {
-	{
-		.compatible = "hisilicon,kirin970-spmi-controller",
-	},
-	{}
-};
-MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
-
-static struct platform_driver spmi_controller_driver = {
-	.probe		= spmi_controller_probe,
-	.remove		= spmi_del_controller,
-	.driver		= {
-		.name	= "hisi_spmi_controller",
-		.of_match_table = spmi_controller_match_table,
-	},
-};
-
-static int __init spmi_controller_init(void)
-{
-	return platform_driver_register(&spmi_controller_driver);
-}
-postcore_initcall(spmi_controller_init);
-
-static void __exit spmi_controller_exit(void)
-{
-	platform_driver_unregister(&spmi_controller_driver);
-}
-module_exit(spmi_controller_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("1.0");
-MODULE_ALIAS("platform:spmi_controller");