staging: iio: light: fix block comments according to kernel coding style

Add the trailing */ accordingly to suit the preferred way of placing
block comments.

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 28 insertions, 14 deletions

diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index 6c9d943cedbf..03dbfb60be42 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -320,8 +320,10 @@ static ssize_t show_prox_infrared_suppression(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
 
-	/* return the "proximity scheme" i.e. if the chip does on chip
-	infrared suppression (1 means perform on chip suppression) */
+	/*
+	 * return the "proximity scheme" i.e. if the chip does on chip
+	 * infrared suppression (1 means perform on chip suppression)
+	 */
 	return sprintf(buf, "%d\n", chip->prox_scheme);
 }
 
@@ -340,8 +342,10 @@ static ssize_t store_prox_infrared_suppression(struct device *dev,
 		return -EINVAL;
 	}
 
-	/* get the  "proximity scheme" i.e. if the chip does on chip
-	infrared suppression (1 means perform on chip suppression) */
+	/*
+	 * get the  "proximity scheme" i.e. if the chip does on chip
+	 * infrared suppression (1 means perform on chip suppression)
+	 */
 	mutex_lock(&chip->lock);
 	chip->prox_scheme = val;
 	mutex_unlock(&chip->lock);
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index 625a11c479e6..5fc411085fbf 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -240,8 +240,10 @@ static int taos_get_lux(struct iio_dev *indio_dev)
 		}
 	}
 
-	/* clear status, really interrupt status (interrupts are off), but
-	 * we use the bit anyway - don't forget 0x80 - this is a command*/
+	/*
+	 * clear status, really interrupt status (interrupts are off), but
+	 * we use the bit anyway - don't forget 0x80 - this is a command
+	 */
 	ret = i2c_smbus_write_byte(chip->client,
 				   (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
 				    TSL258X_CMD_ALS_INT_CLR));
@@ -429,8 +431,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
 	chip->als_saturation = als_count * 922; /* 90% of full scale */
 	chip->als_time_scale = (als_time + 25) / 50;
 
-	/* TSL258x Specific power-on / adc enable sequence
-	 * Power on the device 1st. */
+	/*
+	 * TSL258x Specific power-on / adc enable sequence
+	 * Power on the device 1st.
+	 */
 	utmp = TSL258X_CNTL_PWR_ON;
 	ret = i2c_smbus_write_byte_data(chip->client,
 					TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
@@ -439,8 +443,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
 		return ret;
 	}
 
-	/* Use the following shadow copy for our delay before enabling ADC.
-	 * Write all the registers. */
+	/*
+	 * Use the following shadow copy for our delay before enabling ADC.
+	 * Write all the registers.
+	 */
 	for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) {
 		ret = i2c_smbus_write_byte_data(chip->client,
 						TSL258X_CMD_REG + i,
@@ -453,8 +459,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
 	}
 
 	usleep_range(3000, 3500);
-	/* NOW enable the ADC
-	 * initialize the desired mode of operation */
+	/*
+	 * NOW enable the ADC
+	 * initialize the desired mode of operation
+	 */
 	utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL;
 	ret = i2c_smbus_write_byte_data(chip->client,
 					TSL258X_CMD_REG | TSL258X_CNTRL,
@@ -704,8 +712,10 @@ static ssize_t taos_luxtable_show(struct device *dev,
 				  taos_device_lux[i].ch0,
 				  taos_device_lux[i].ch1);
 		if (taos_device_lux[i].ratio == 0) {
-			/* We just printed the first "0" entry.
-			 * Now get rid of the extra "," and break. */
+			/*
+			 * We just printed the first "0" entry.
+			 * Now get rid of the extra "," and break.
+			 */
 			offset--;
 			break;
 		}