diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-07-14 12:05:29 +0900 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-07-14 12:05:29 +0900 |
commit | 6c71ee3b6157fdbde5c839405b593876d3687eb9 (patch) | |
tree | b22fc024193c447affb729423f0e661b60b59e5a /drivers/staging/iio | |
parent | 7813029a509c0c92a5b16d846defaa50a2d3d7f1 (diff) | |
parent | 0ddfd857130d16b1fb1e45c5ab2321a65738d70b (diff) | |
download | linux-6c71ee3b6157fdbde5c839405b593876d3687eb9.tar.gz linux-6c71ee3b6157fdbde5c839405b593876d3687eb9.tar.bz2 linux-6c71ee3b6157fdbde5c839405b593876d3687eb9.zip |
Merge tag 'iio-for-4.8c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of IIO new device support, features and cleanups for the 4.8 cycle.
New core features
- Selection of the clock source for IIO timestamps. This is done per device
as it makes little sense to have events in one timebase and data timestamped
on another. Biggest reason for this is that we currently use a clock
source which is non monotonic which can result in 'interesting' data sets.
(Includes export for get_monotonic_corse64 which Thomas Gleixner didn't mind
in an earlier version.)
- MAINTAINERS add the git tree to the list for IIO.
New device support + a kind of indirect staging graduation.
* Broadcom iproc-static-adc
- new driver
* mcp4531
- support for MCP454x, MCP456x, MCP464x and MCP466x potentiometers
* mpu6050
- support the IC20608 6 axis motion tracking device
* st-sensors
- support the lis3l02dq + drop the lis3l02dq driver from staging.
The general purpose driver is missing event support, but good to get
rid of this driver which was rather long in the tooth.
New driver features
* ak8975
- Add vid regulator support and refactor handling in general.
- Allow a delay after enabling regulators.
- Runtime and system PM.
* bmg160
- filter frequency control support.
* bmp280
- SPI device support.
- EOC interrupt support for the BMP085
- power management support.
- supply regulator support.
- reset gpio support
- dt bindings for reset gpio and regulators.
- of table to support device tree registration
* max1363
- Device tree bindings.
* mcp4531
- Device tree bindings.
* st-pressure
- temperature channels as part of triggered buffer (previously not due
probably to alignment issues - see below).
- lps22hb open drain interrupt support.
- lps22hb temperature channel support
Cleanups and reworkings.
* numerous ADC drivers
- ensure the iio_dev->dev.of_node is set to the parent dev.of_node so
as to allow client bindings to find the device.
* ak8975
- Fix incorrect handling of missing regulator
- make sure power is down and remove.
* bmp280
- read the calibration data only once as it doesn't change.
* isl29125
- Use a few macros to make code a touch more readable.
* mma8452
- fix a memory leak on error.
- drop an unecessary bit of return value handling.
* potentiometer kconfig
- typo fix.
* st-pressure
- drop some uninformative default assignments of elements of the channel
array structure (aids readability).
* st-sensors
- Harden interrupt handling considerably. These are actually all using
level interrupts, but at least two known boards have them wired to
edge only interrupt chips. Hence a slightly interesting bit of handling
is needed in which we first allow for the easy option (level triggered) and
secondly check the status registers before reenabling edge interrupts and
fall back to a tight loop in the thread until we successfully clear the
interrupt. No harm is done if we never succeed in doing so. It's an odd
patch that has been through a lot of revisions to reach a consensus on how
to handle what is basically broken hardware (which the previous defaults
allowed to kind of work).
- Fix alignment to defined storagebytes boundaries.
- Ensure alignment of power of 2 byte boundaries. This has always in theory
been part of the ABI of IIO, but we missed a few that snuck in that need
fixing. The effect was minor as they were only followed by timestamp
channels which were correctly aligned,
- Add some docs to explain the gain calculations.
Diffstat (limited to 'drivers/staging/iio')
-rw-r--r-- | drivers/staging/iio/accel/Kconfig | 14 | ||||
-rw-r--r-- | drivers/staging/iio/accel/Makefile | 4 | ||||
-rw-r--r-- | drivers/staging/iio/accel/lis3l02dq.h | 217 | ||||
-rw-r--r-- | drivers/staging/iio/accel/lis3l02dq_core.c | 814 | ||||
-rw-r--r-- | drivers/staging/iio/accel/lis3l02dq_ring.c | 428 | ||||
-rw-r--r-- | drivers/staging/iio/accel/sca3000_core.c | 2 | ||||
-rw-r--r-- | drivers/staging/iio/adc/ad7280a.c | 8 | ||||
-rw-r--r-- | drivers/staging/iio/adc/ad7606_ring.c | 3 | ||||
-rw-r--r-- | drivers/staging/iio/adc/ad7816.c | 3 | ||||
-rw-r--r-- | drivers/staging/iio/addac/adt7316.c | 4 | ||||
-rw-r--r-- | drivers/staging/iio/cdc/ad7150.c | 2 | ||||
-rw-r--r-- | drivers/staging/iio/light/tsl2x7x_core.c | 2 |
12 files changed, 13 insertions, 1488 deletions
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig index f066aa30f0ac..1c994b57c7d2 100644 --- a/drivers/staging/iio/accel/Kconfig +++ b/drivers/staging/iio/accel/Kconfig @@ -51,20 +51,6 @@ config ADIS16240 To compile this driver as a module, say M here: the module will be called adis16240. -config LIS3L02DQ - tristate "ST Microelectronics LIS3L02DQ Accelerometer Driver" - depends on SPI - select IIO_TRIGGER if IIO_BUFFER - depends on !IIO_BUFFER || IIO_KFIFO_BUF - depends on GPIOLIB || COMPILE_TEST - help - Say Y here to build SPI support for the ST microelectronics - accelerometer. The driver supplies direct access via sysfs files - and an event interface via a character device. - - To compile this driver as a module, say M here: the module will be - called lis3l02dq. - config SCA3000 depends on IIO_BUFFER depends on SPI diff --git a/drivers/staging/iio/accel/Makefile b/drivers/staging/iio/accel/Makefile index 415329c96f0c..1810a434a755 100644 --- a/drivers/staging/iio/accel/Makefile +++ b/drivers/staging/iio/accel/Makefile @@ -14,9 +14,5 @@ obj-$(CONFIG_ADIS16209) += adis16209.o adis16240-y := adis16240_core.o obj-$(CONFIG_ADIS16240) += adis16240.o -lis3l02dq-y := lis3l02dq_core.o -lis3l02dq-$(CONFIG_IIO_BUFFER) += lis3l02dq_ring.o -obj-$(CONFIG_LIS3L02DQ) += lis3l02dq.o - sca3000-y := sca3000_core.o sca3000_ring.o obj-$(CONFIG_SCA3000) += sca3000.o diff --git a/drivers/staging/iio/accel/lis3l02dq.h b/drivers/staging/iio/accel/lis3l02dq.h deleted file mode 100644 index 6bd3d4d5bc9d..000000000000 --- a/drivers/staging/iio/accel/lis3l02dq.h +++ /dev/null @@ -1,217 +0,0 @@ -/* - * LISL02DQ.h -- support STMicroelectronics LISD02DQ - * 3d 2g Linear Accelerometers via SPI - * - * Copyright (c) 2007 Jonathan Cameron <jic23@kernel.org> - * - * Loosely based upon tle62x0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef SPI_LIS3L02DQ_H_ -#define SPI_LIS3L02DQ_H_ -#define LIS3L02DQ_READ_REG(a) ((a) | 0x80) -#define LIS3L02DQ_WRITE_REG(a) a - -/* Calibration parameters */ -#define LIS3L02DQ_REG_OFFSET_X_ADDR 0x16 -#define LIS3L02DQ_REG_OFFSET_Y_ADDR 0x17 -#define LIS3L02DQ_REG_OFFSET_Z_ADDR 0x18 - -#define LIS3L02DQ_REG_GAIN_X_ADDR 0x19 -#define LIS3L02DQ_REG_GAIN_Y_ADDR 0x1A -#define LIS3L02DQ_REG_GAIN_Z_ADDR 0x1B - -/* Control Register (1 of 2) */ -#define LIS3L02DQ_REG_CTRL_1_ADDR 0x20 -/* Power ctrl - either bit set corresponds to on*/ -#define LIS3L02DQ_REG_CTRL_1_PD_ON 0xC0 - -/* Decimation Factor */ -#define LIS3L02DQ_DEC_MASK 0x30 -#define LIS3L02DQ_REG_CTRL_1_DF_128 0x00 -#define LIS3L02DQ_REG_CTRL_1_DF_64 0x10 -#define LIS3L02DQ_REG_CTRL_1_DF_32 0x20 -#define LIS3L02DQ_REG_CTRL_1_DF_8 (0x10 | 0x20) - -/* Self Test Enable */ -#define LIS3L02DQ_REG_CTRL_1_SELF_TEST_ON 0x08 - -/* Axes enable ctrls */ -#define LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE 0x04 -#define LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE 0x02 -#define LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE 0x01 - -/* Control Register (2 of 2) */ -#define LIS3L02DQ_REG_CTRL_2_ADDR 0x21 - -/* Block Data Update only after MSB and LSB read */ -#define LIS3L02DQ_REG_CTRL_2_BLOCK_UPDATE 0x40 - -/* Set to big endian output */ -#define LIS3L02DQ_REG_CTRL_2_BIG_ENDIAN 0x20 - -/* Reboot memory content */ -#define LIS3L02DQ_REG_CTRL_2_REBOOT_MEMORY 0x10 - -/* Interrupt Enable - applies data ready to the RDY pad */ -#define LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT 0x08 - -/* Enable Data Ready Generation - relationship with previous unclear in docs */ -#define LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION 0x04 - -/* SPI 3 wire mode */ -#define LIS3L02DQ_REG_CTRL_2_THREE_WIRE_SPI_MODE 0x02 - -/* Data alignment, default is 12 bit right justified - * - option for 16 bit left justified - */ -#define LIS3L02DQ_REG_CTRL_2_DATA_ALIGNMENT_16_BIT_LEFT_JUSTIFIED 0x01 - -/* Interrupt related stuff */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_ADDR 0x23 - -/* Switch from or combination of conditions to and */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_BOOLEAN_AND 0x80 - -/* Latch interrupt request, - * if on ack must be given by reading the ack register - */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_LATCH_SRC 0x40 - -/* Z Interrupt on High (above threshold) */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_HIGH 0x20 -/* Z Interrupt on Low */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_LOW 0x10 -/* Y Interrupt on High */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_HIGH 0x08 -/* Y Interrupt on Low */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_LOW 0x04 -/* X Interrupt on High */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_HIGH 0x02 -/* X Interrupt on Low */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW 0x01 - -/* Register that gives description of what caused interrupt - * - latched if set in CFG_ADDRES - */ -#define LIS3L02DQ_REG_WAKE_UP_SRC_ADDR 0x24 -/* top bit ignored */ -/* Interrupt Active */ -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_ACTIVATED 0x40 -/* Interupts that have been triggered */ -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_HIGH 0x20 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_LOW 0x10 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_HIGH 0x08 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_LOW 0x04 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_HIGH 0x02 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_LOW 0x01 - -#define LIS3L02DQ_REG_WAKE_UP_ACK_ADDR 0x25 - -/* Status register */ -#define LIS3L02DQ_REG_STATUS_ADDR 0x27 -/* XYZ axis data overrun - first is all overrun? */ -#define LIS3L02DQ_REG_STATUS_XYZ_OVERRUN 0x80 -#define LIS3L02DQ_REG_STATUS_Z_OVERRUN 0x40 -#define LIS3L02DQ_REG_STATUS_Y_OVERRUN 0x20 -#define LIS3L02DQ_REG_STATUS_X_OVERRUN 0x10 -/* XYZ new data available - first is all 3 available? */ -#define LIS3L02DQ_REG_STATUS_XYZ_NEW_DATA 0x08 -#define LIS3L02DQ_REG_STATUS_Z_NEW_DATA 0x04 -#define LIS3L02DQ_REG_STATUS_Y_NEW_DATA 0x02 -#define LIS3L02DQ_REG_STATUS_X_NEW_DATA 0x01 - -/* The accelerometer readings - low and high bytes. - * Form of high byte dependent on justification set in ctrl reg - */ -#define LIS3L02DQ_REG_OUT_X_L_ADDR 0x28 -#define LIS3L02DQ_REG_OUT_X_H_ADDR 0x29 -#define LIS3L02DQ_REG_OUT_Y_L_ADDR 0x2A -#define LIS3L02DQ_REG_OUT_Y_H_ADDR 0x2B -#define LIS3L02DQ_REG_OUT_Z_L_ADDR 0x2C -#define LIS3L02DQ_REG_OUT_Z_H_ADDR 0x2D - -/* Threshold values for all axes and both above and below thresholds - * - i.e. there is only one value - */ -#define LIS3L02DQ_REG_THS_L_ADDR 0x2E -#define LIS3L02DQ_REG_THS_H_ADDR 0x2F - -#define LIS3L02DQ_DEFAULT_CTRL1 (LIS3L02DQ_REG_CTRL_1_PD_ON \ - | LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE \ - | LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE \ - | LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE \ - | LIS3L02DQ_REG_CTRL_1_DF_128) - -#define LIS3L02DQ_DEFAULT_CTRL2 0 - -#define LIS3L02DQ_MAX_TX 12 -#define LIS3L02DQ_MAX_RX 12 -/** - * struct lis3l02dq_state - device instance specific data - * @us: actual spi_device - * @trig: data ready trigger registered with iio - * @buf_lock: mutex to protect tx and rx - * @tx: transmit buffer - * @rx: receive buffer - **/ -struct lis3l02dq_state { - struct spi_device *us; - struct iio_trigger *trig; - struct mutex buf_lock; - int gpio; - bool trigger_on; - - u8 tx[LIS3L02DQ_MAX_RX] ____cacheline_aligned; - u8 rx[LIS3L02DQ_MAX_RX] ____cacheline_aligned; -}; - -int lis3l02dq_spi_read_reg_8(struct iio_dev *indio_dev, - u8 reg_address, - u8 *val); - -int lis3l02dq_spi_write_reg_8(struct iio_dev *indio_dev, - u8 reg_address, - u8 val); - -int lis3l02dq_disable_all_events(struct iio_dev *indio_dev); - -#ifdef CONFIG_IIO_BUFFER -/* At the moment triggers are only used for buffer - * filling. This may change! - */ -void lis3l02dq_remove_trigger(struct iio_dev *indio_dev); -int lis3l02dq_probe_trigger(struct iio_dev *indio_dev); - -int lis3l02dq_configure_buffer(struct iio_dev *indio_dev); -void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev); - -irqreturn_t lis3l02dq_data_rdy_trig_poll(int irq, void *private); -#define lis3l02dq_th lis3l02dq_data_rdy_trig_poll - -#else /* CONFIG_IIO_BUFFER */ -#define lis3l02dq_th lis3l02dq_nobuffer - -static inline void lis3l02dq_remove_trigger(struct iio_dev *indio_dev) -{ -} - -static inline int lis3l02dq_probe_trigger(struct iio_dev *indio_dev) -{ - return 0; -} - -static int lis3l02dq_configure_buffer(struct iio_dev *indio_dev) -{ - return 0; -} - -static inline void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev) -{ -} -#endif /* CONFIG_IIO_BUFFER */ -#endif /* SPI_LIS3L02DQ_H_ */ diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c deleted file mode 100644 index 7a6fed3f2d3f..000000000000 --- a/drivers/staging/iio/accel/lis3l02dq_core.c +++ /dev/null @@ -1,814 +0,0 @@ -/* - * lis3l02dq.c support STMicroelectronics LISD02DQ - * 3d 2g Linear Accelerometers via SPI - * - * Copyright (c) 2007 Jonathan Cameron <jic23@kernel.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Settings: - * 16 bit left justified mode used. - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/of_gpio.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/sysfs.h> -#include <linux/module.h> - -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/events.h> -#include <linux/iio/buffer.h> - -#include "lis3l02dq.h" - -/* At the moment the spi framework doesn't allow global setting of cs_change. - * It's in the likely to be added comment at the top of spi.h. - * This means that use cannot be made of spi_write etc. - */ -/* direct copy of the irq_default_primary_handler */ -#ifndef CONFIG_IIO_BUFFER -static irqreturn_t lis3l02dq_nobuffer(int irq, void *private) -{ - return IRQ_WAKE_THREAD; -} -#endif - -/** - * lis3l02dq_spi_read_reg_8() - read single byte from a single register - * @indio_dev: iio_dev for this actual device - * @reg_address: the address of the register to be read - * @val: pass back the resulting value - **/ -int lis3l02dq_spi_read_reg_8(struct iio_dev *indio_dev, - u8 reg_address, u8 *val) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - int ret; - struct spi_transfer xfer = { - .tx_buf = st->tx, - .rx_buf = st->rx, - .bits_per_word = 8, - .len = 2, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = LIS3L02DQ_READ_REG(reg_address); - st->tx[1] = 0; - - ret = spi_sync_transfer(st->us, &xfer, 1); - *val = st->rx[1]; - mutex_unlock(&st->buf_lock); - - return ret; -} - -/** - * lis3l02dq_spi_write_reg_8() - write single byte to a register - * @indio_dev: iio_dev for this device - * @reg_address: the address of the register to be written - * @val: the value to write - **/ -int lis3l02dq_spi_write_reg_8(struct iio_dev *indio_dev, - u8 reg_address, - u8 val) -{ - int ret; - struct lis3l02dq_state *st = iio_priv(indio_dev); - - mutex_lock(&st->buf_lock); - st->tx[0] = LIS3L02DQ_WRITE_REG(reg_address); - st->tx[1] = val; - ret = spi_write(st->us, st->tx, 2); - mutex_unlock(&st->buf_lock); - - return ret; -} - -/** - * lisl302dq_spi_write_reg_s16() - write 2 bytes to a pair of registers - * @indio_dev: iio_dev for this device - * @lower_reg_address: the address of the lower of the two registers. - * Second register is assumed to have address one greater. - * @value: value to be written - **/ -static int lis3l02dq_spi_write_reg_s16(struct iio_dev *indio_dev, - u8 lower_reg_address, - s16 value) -{ - int ret; - struct lis3l02dq_state *st = iio_priv(indio_dev); - struct spi_transfer xfers[] = { { - .tx_buf = st->tx, - .bits_per_word = 8, - .len = 2, - .cs_change = 1, - }, { - .tx_buf = st->tx + 2, - .bits_per_word = 8, - .len = 2, - }, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = LIS3L02DQ_WRITE_REG(lower_reg_address); - st->tx[1] = value & 0xFF; - st->tx[2] = LIS3L02DQ_WRITE_REG(lower_reg_address + 1); - st->tx[3] = (value >> 8) & 0xFF; - - ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers)); - mutex_unlock(&st->buf_lock); - - return ret; -} - -static int lis3l02dq_read_reg_s16(struct iio_dev *indio_dev, - u8 lower_reg_address, - int *val) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - int ret; - s16 tempval; - struct spi_transfer xfers[] = { { - .tx_buf = st->tx, - .rx_buf = st->rx, - .bits_per_word = 8, - .len = 2, - .cs_change = 1, - }, { - .tx_buf = st->tx + 2, - .rx_buf = st->rx + 2, - .bits_per_word = 8, - .len = 2, - }, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = LIS3L02DQ_READ_REG(lower_reg_address); - st->tx[1] = 0; - st->tx[2] = LIS3L02DQ_READ_REG(lower_reg_address + 1); - st->tx[3] = 0; - - ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers)); - if (ret) { - dev_err(&st->us->dev, "problem when reading 16 bit register"); - goto error_ret; - } - tempval = (s16)(st->rx[1]) | ((s16)(st->rx[3]) << 8); - - *val = tempval; -error_ret: - mutex_unlock(&st->buf_lock); - return ret; -} - -enum lis3l02dq_rm_ind { - LIS3L02DQ_ACCEL, - LIS3L02DQ_GAIN, - LIS3L02DQ_BIAS, -}; - -static u8 lis3l02dq_axis_map[3][3] = { - [LIS3L02DQ_ACCEL] = { LIS3L02DQ_REG_OUT_X_L_ADDR, - LIS3L02DQ_REG_OUT_Y_L_ADDR, - LIS3L02DQ_REG_OUT_Z_L_ADDR }, - [LIS3L02DQ_GAIN] = { LIS3L02DQ_REG_GAIN_X_ADDR, - LIS3L02DQ_REG_GAIN_Y_ADDR, - LIS3L02DQ_REG_GAIN_Z_ADDR }, - [LIS3L02DQ_BIAS] = { LIS3L02DQ_REG_OFFSET_X_ADDR, - LIS3L02DQ_REG_OFFSET_Y_ADDR, - LIS3L02DQ_REG_OFFSET_Z_ADDR } -}; - -static int lis3l02dq_read_thresh(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int *val, int *val2) -{ - int ret; - - ret = lis3l02dq_read_reg_s16(indio_dev, LIS3L02DQ_REG_THS_L_ADDR, val); - if (ret) - return ret; - return IIO_VAL_INT; -} - -static int lis3l02dq_write_thresh(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int val, int val2) -{ - u16 value = val; - - return lis3l02dq_spi_write_reg_s16(indio_dev, - LIS3L02DQ_REG_THS_L_ADDR, - value); -} - -static int lis3l02dq_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) -{ - int ret = -EINVAL, reg; - u8 uval; - s8 sval; - - switch (mask) { - case IIO_CHAN_INFO_CALIBBIAS: - if (val > 255 || val < -256) - return -EINVAL; - sval = val; - reg = lis3l02dq_axis_map[LIS3L02DQ_BIAS][chan->address]; - ret = lis3l02dq_spi_write_reg_8(indio_dev, reg, sval); - break; - case IIO_CHAN_INFO_CALIBSCALE: - if (val & ~0xFF) - return -EINVAL; - uval = val; - reg = lis3l02dq_axis_map[LIS3L02DQ_GAIN][chan->address]; - ret = lis3l02dq_spi_write_reg_8(indio_dev, reg, uval); - break; - } - return ret; -} - -static int lis3l02dq_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask) -{ - u8 utemp; - s8 stemp; - ssize_t ret = 0; - u8 reg; - - switch (mask) { - case IIO_CHAN_INFO_RAW: - /* Take the iio_dev status lock */ - mutex_lock(&indio_dev->mlock); - if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) { - ret = -EBUSY; - } else { - reg = lis3l02dq_axis_map - [LIS3L02DQ_ACCEL][chan->address]; - ret = lis3l02dq_read_reg_s16(indio_dev, reg, val); - } - mutex_unlock(&indio_dev->mlock); - if (ret < 0) - goto error_ret; - return IIO_VAL_INT; - case IIO_CHAN_INFO_SCALE: - *val = 0; - *val2 = 9580; - return IIO_VAL_INT_PLUS_MICRO; - case IIO_CHAN_INFO_CALIBSCALE: - reg = lis3l02dq_axis_map[LIS3L02DQ_GAIN][chan->address]; - ret = lis3l02dq_spi_read_reg_8(indio_dev, reg, &utemp); - if (ret) - goto error_ret; - /* to match with what previous code does */ - *val = utemp; - return IIO_VAL_INT; - - case IIO_CHAN_INFO_CALIBBIAS: - reg = lis3l02dq_axis_map[LIS3L02DQ_BIAS][chan->address]; - ret = lis3l02dq_spi_read_reg_8(indio_dev, reg, (u8 *)&stemp); - /* to match with what previous code does */ - *val = stemp; - return IIO_VAL_INT; - } -error_ret: - return ret; -} - -static ssize_t lis3l02dq_read_frequency(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - int ret, len = 0; - s8 t; - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - (u8 *)&t); - if (ret) - return ret; - t &= LIS3L02DQ_DEC_MASK; - switch (t) { - case LIS3L02DQ_REG_CTRL_1_DF_128: - len = sprintf(buf, "280\n"); - break; - case LIS3L02DQ_REG_CTRL_1_DF_64: - len = sprintf(buf, "560\n"); - break; - case LIS3L02DQ_REG_CTRL_1_DF_32: - len = sprintf(buf, "1120\n"); - break; - case LIS3L02DQ_REG_CTRL_1_DF_8: - len = sprintf(buf, "4480\n"); - break; - } - return len; -} - -static ssize_t lis3l02dq_write_frequency(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - unsigned long val; - int ret; - u8 t; - - ret = kstrtoul(buf, 10, &val); - if (ret) - return ret; - - mutex_lock(&indio_dev->mlock); - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - &t); - if (ret) - goto error_ret_mutex; - /* Wipe the bits clean */ - t &= ~LIS3L02DQ_DEC_MASK; - switch (val) { - case 280: - t |= LIS3L02DQ_REG_CTRL_1_DF_128; - break; - case 560: - t |= LIS3L02DQ_REG_CTRL_1_DF_64; - break; - case 1120: - t |= LIS3L02DQ_REG_CTRL_1_DF_32; - break; - case 4480: - t |= LIS3L02DQ_REG_CTRL_1_DF_8; - break; - default: - ret = -EINVAL; - goto error_ret_mutex; - } - - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - t); - -error_ret_mutex: - mutex_unlock(&indio_dev->mlock); - - return ret ? ret : len; -} - -static int lis3l02dq_initial_setup(struct iio_dev *indio_dev) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - int ret; - u8 val, valtest; - - st->us->mode = SPI_MODE_3; - - spi_setup(st->us); - - val = LIS3L02DQ_DEFAULT_CTRL1; - /* Write suitable defaults to ctrl1 */ - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - val); - if (ret) { - dev_err(&st->us->dev, "problem with setup control register 1"); - goto err_ret; - } - /* Repeat as sometimes doesn't work first time? */ - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - val); - if (ret) { - dev_err(&st->us->dev, "problem with setup control register 1"); - goto err_ret; - } - - /* - * Read back to check this has worked acts as loose test of correct - * chip - */ - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - &valtest); - if (ret || (valtest != val)) { - dev_err(&indio_dev->dev, - "device not playing ball %d %d\n", valtest, val); - ret = -EINVAL; - goto err_ret; - } - - val = LIS3L02DQ_DEFAULT_CTRL2; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - val); - if (ret) { - dev_err(&st->us->dev, "problem with setup control register 2"); - goto err_ret; - } - - val = LIS3L02DQ_REG_WAKE_UP_CFG_LATCH_SRC; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - val); - if (ret) - dev_err(&st->us->dev, "problem with interrupt cfg register"); -err_ret: - - return ret; -} - -static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, - lis3l02dq_read_frequency, - lis3l02dq_write_frequency); - -static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("280 560 1120 4480"); - -static irqreturn_t lis3l02dq_event_handler(int irq, void *private) -{ - struct iio_dev *indio_dev = private; - u8 t; - - s64 timestamp = iio_get_time_ns(); - - lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_SRC_ADDR, - &t); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_HIGH) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Z, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_RISING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_LOW) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Z, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_FALLING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_HIGH) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Y, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_RISING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_LOW) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Y, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_FALLING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_HIGH) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_RISING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_LOW) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_FALLING), - timestamp); - - /* Ack and allow for new interrupts */ - lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_ACK_ADDR, - &t); - - return IRQ_HANDLED; -} - -static const struct iio_event_spec lis3l02dq_event[] = { - { - .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_RISING, - .mask_separate = BIT(IIO_EV_INFO_ENABLE), - .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), - }, { - .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_FALLING, - .mask_separate = BIT(IIO_EV_INFO_ENABLE), - .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), - } -}; - -#define LIS3L02DQ_CHAN(index, mod) \ - { \ - .type = IIO_ACCEL, \ - .modified = 1, \ - .channel2 = mod, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_CALIBSCALE) | \ - BIT(IIO_CHAN_INFO_CALIBBIAS), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .address = index, \ - .scan_index = index, \ - .scan_type = { \ - .sign = 's', \ - .realbits = 12, \ - .storagebits = 16, \ - }, \ - .event_spec = lis3l02dq_event, \ - .num_event_specs = ARRAY_SIZE(lis3l02dq_event), \ - } - -static const struct iio_chan_spec lis3l02dq_channels[] = { - LIS3L02DQ_CHAN(0, IIO_MOD_X), - LIS3L02DQ_CHAN(1, IIO_MOD_Y), - LIS3L02DQ_CHAN(2, IIO_MOD_Z), - IIO_CHAN_SOFT_TIMESTAMP(3) -}; - -static int lis3l02dq_read_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir) -{ - u8 val; - int ret; - u8 mask = 1 << (chan->channel2 * 2 + (dir == IIO_EV_DIR_RISING)); - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - &val); - if (ret < 0) - return ret; - - return !!(val & mask); -} - -int lis3l02dq_disable_all_events(struct iio_dev *indio_dev) -{ - int ret; - u8 control, val; - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - &control); - - control &= ~LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - control); - if (ret) - goto error_ret; - /* Also for consistency clear the mask */ - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - &val); - if (ret) - goto error_ret; - val &= ~0x3f; - - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - val); - if (ret) - goto error_ret; - - ret = control; -error_ret: - return ret; -} - -static int lis3l02dq_write_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - int state) -{ - int ret = 0; - u8 val, control; - u8 currentlyset; - bool changed = false; - u8 mask = 1 << (chan->channel2 * 2 + (dir == IIO_EV_DIR_RISING)); - - mutex_lock(&indio_dev->mlock); - /* read current control */ - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - &control); - if (ret) - goto error_ret; - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - &val); - if (ret < 0) - goto error_ret; - currentlyset = val & mask; - - if (!currentlyset && state) { - changed = true; - val |= mask; - } else if (currentlyset && !state) { - changed = true; - val &= ~mask; - } - - if (changed) { - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - val); - if (ret) - goto error_ret; - control = val & 0x3f ? - (control | LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT) : - (control & ~LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT); - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - control); - if (ret) - goto error_ret; - } - -error_ret: - mutex_unlock(&indio_dev->mlock); - return ret; -} - -static struct attribute *lis3l02dq_attributes[] = { - &iio_dev_attr_sampling_frequency.dev_attr.attr, - &iio_const_attr_sampling_frequency_available.dev_attr.attr, - NULL -}; - -static const struct attribute_group lis3l02dq_attribute_group = { - .attrs = lis3l02dq_attributes, -}; - -static const struct iio_info lis3l02dq_info = { - .read_raw = &lis3l02dq_read_raw, - .write_raw = &lis3l02dq_write_raw, - .read_event_value = &lis3l02dq_read_thresh, - .write_event_value = &lis3l02dq_write_thresh, - .write_event_config = &lis3l02dq_write_event_config, - .read_event_config = &lis3l02dq_read_event_config, - .driver_module = THIS_MODULE, - .attrs = &lis3l02dq_attribute_group, -}; - -static int lis3l02dq_probe(struct spi_device *spi) -{ - int ret; - struct lis3l02dq_state *st; - struct iio_dev *indio_dev; - - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - st = iio_priv(indio_dev); - /* this is only used for removal purposes */ - spi_set_drvdata(spi, indio_dev); - - st->us = spi; - st->gpio = of_get_gpio(spi->dev.of_node, 0); - mutex_init(&st->buf_lock); - indio_dev->name = spi->dev.driver->name; - indio_dev->dev.parent = &spi->dev; - indio_dev->info = &lis3l02dq_info; - indio_dev->channels = lis3l02dq_channels; - indio_dev->num_channels = ARRAY_SIZE(lis3l02dq_channels); - - indio_dev->modes = INDIO_DIRECT_MODE; - - ret = lis3l02dq_configure_buffer(indio_dev); - if (ret) - return ret; - - if (spi->irq) { - ret = request_threaded_irq(st->us->irq, - &lis3l02dq_th, - &lis3l02dq_event_handler, - IRQF_TRIGGER_RISING, - "lis3l02dq", - indio_dev); - if (ret) - goto error_unreg_buffer_funcs; - - ret = lis3l02dq_probe_trigger(indio_dev); - if (ret) - goto error_free_interrupt; - } - - /* Get the device into a sane initial state */ - ret = lis3l02dq_initial_setup(indio_dev); - if (ret) - goto error_remove_trigger; - - ret = iio_device_register(indio_dev); - if (ret) - goto error_remove_trigger; - - return 0; - -error_remove_trigger: - if (spi->irq) - lis3l02dq_remove_trigger(indio_dev); -error_free_interrupt: - if (spi->irq) - free_irq(st->us->irq, indio_dev); -error_unreg_buffer_funcs: - lis3l02dq_unconfigure_buffer(indio_dev); - return ret; -} - -/* Power down the device */ -static int lis3l02dq_stop_device(struct iio_dev *indio_dev) -{ - int ret; - struct lis3l02dq_state *st = iio_priv(indio_dev); - u8 val = 0; - - mutex_lock(&indio_dev->mlock); - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - val); - if (ret) { - dev_err(&st->us->dev, "problem with turning device off: ctrl1"); - goto err_ret; - } - - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - val); - if (ret) - dev_err(&st->us->dev, "problem with turning device off: ctrl2"); -err_ret: - mutex_unlock(&indio_dev->mlock); - return ret; -} - -/* fixme, confirm ordering in this function */ -static int lis3l02dq_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct lis3l02dq_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - - lis3l02dq_disable_all_events(indio_dev); - lis3l02dq_stop_device(indio_dev); - - if (spi->irq) - free_irq(st->us->irq, indio_dev); - - lis3l02dq_remove_trigger(indio_dev); - lis3l02dq_unconfigure_buffer(indio_dev); - - return 0; -} - -static struct spi_driver lis3l02dq_driver = { - .driver = { - .name = "lis3l02dq", - }, - .probe = lis3l02dq_probe, - .remove = lis3l02dq_remove, -}; -module_spi_driver(lis3l02dq_driver); - -MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); -MODULE_DESCRIPTION("ST LIS3L02DQ Accelerometer SPI driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("spi:lis3l02dq"); diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c deleted file mode 100644 index 50c162e0c31f..000000000000 --- a/drivers/staging/iio/accel/lis3l02dq_ring.c +++ /dev/null @@ -1,428 +0,0 @@ -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/mutex.h> -#include <linux/kernel.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/export.h> - -#include <linux/iio/iio.h> -#include <linux/iio/kfifo_buf.h> -#include <linux/iio/trigger.h> -#include <linux/iio/trigger_consumer.h> -#include "lis3l02dq.h" - -/** - * combine_8_to_16() utility function to munge two u8s into u16 - **/ -static inline u16 combine_8_to_16(u8 lower, u8 upper) -{ - u16 _lower = lower; - u16 _upper = upper; - - return _lower | (_upper << 8); -} - -/** - * lis3l02dq_data_rdy_trig_poll() the event handler for the data rdy trig - **/ -irqreturn_t lis3l02dq_data_rdy_trig_poll(int irq, void *private) -{ - struct iio_dev *indio_dev = private; - struct lis3l02dq_state *st = iio_priv(indio_dev); - - if (st->trigger_on) { - iio_trigger_poll(st->trig); - return IRQ_HANDLED; - } - - return IRQ_WAKE_THREAD; -} - -static const u8 read_all_tx_array[] = { - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_X_L_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_X_H_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_Y_L_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_Y_H_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_Z_L_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_Z_H_ADDR), 0, -}; - -/** - * lis3l02dq_read_all() Reads all channels currently selected - * @indio_dev: IIO device state - * @rx_array: (dma capable) receive array, must be at least - * 4*number of channels - **/ -static int lis3l02dq_read_all(struct iio_dev *indio_dev, u8 *rx_array) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - struct spi_transfer *xfers; - struct spi_message msg; - int ret, i, j = 0; - - xfers = kcalloc(bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * 2, - sizeof(*xfers), GFP_KERNEL); - if (!xfers) - return -ENOMEM; - - mutex_lock(&st->buf_lock); - - for (i = 0; i < ARRAY_SIZE(read_all_tx_array) / 4; i++) - if (test_bit(i, indio_dev->active_scan_mask)) { - /* lower byte */ - xfers[j].tx_buf = st->tx + (2 * j); - st->tx[2 * j] = read_all_tx_array[i * 4]; - st->tx[2 * j + 1] = 0; - if (rx_array) - xfers[j].rx_buf = rx_array + (j * 2); - xfers[j].bits_per_word = 8; - xfers[j].len = 2; - xfers[j].cs_change = 1; - j++; - - /* upper byte */ - xfers[j].tx_buf = st->tx + (2 * j); - st->tx[2 * j] = read_all_tx_array[i * 4 + 2]; - st->tx[2 * j + 1] = 0; - if (rx_array) - xfers[j].rx_buf = rx_array + (j * 2); - xfers[j].bits_per_word = 8; - xfers[j].len = 2; - xfers[j].cs_change = 1; - j++; - } - - /* After these are transmitted, the rx_buff should have - * values in alternate bytes - */ - spi_message_init(&msg); - for (j = 0; j < bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * 2; j++) - spi_message_add_tail(&xfers[j], &msg); - - ret = spi_sync(st->us, &msg); - mutex_unlock(&st->buf_lock); - kfree(xfers); - - return ret; -} - -static int lis3l02dq_get_buffer_element(struct iio_dev *indio_dev, - u8 *buf) -{ - int ret, i; - u8 *rx_array; - s16 *data = (s16 *)buf; - int scan_count = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength); - - rx_array = kcalloc(4, scan_count, GFP_KERNEL); - if (!rx_array) - return -ENOMEM; - ret = lis3l02dq_read_all(indio_dev, rx_array); - if (ret < 0) { - kfree(rx_array); - return ret; - } - for (i = 0; i < scan_count; i++) - data[i] = combine_8_to_16(rx_array[i * 4 + 1], - rx_array[i * 4 + 3]); - kfree(rx_array); - - return i * sizeof(data[0]); -} - -static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct iio_dev *indio_dev = pf->indio_dev; - int len = 0; - char *data; - - data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); - if (!data) - goto done; - - if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) - len = lis3l02dq_get_buffer_element(indio_dev, data); - - iio_push_to_buffers_with_timestamp(indio_dev, data, pf->timestamp); - - kfree(data); -done: - iio_trigger_notify_done(indio_dev->trig); - return IRQ_HANDLED; -} - -/* Caller responsible for locking as necessary. */ -static int -__lis3l02dq_write_data_ready_config(struct iio_dev *indio_dev, bool state) -{ - int ret; - u8 valold; - bool currentlyset; - struct lis3l02dq_state *st = iio_priv(indio_dev); - - /* Get the current event mask register */ - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - &valold); - if (ret) - goto error_ret; - /* Find out if data ready is already on */ - currentlyset - = valold & LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION; - - /* Disable requested */ - if (!state && currentlyset) { - /* Disable the data ready signal */ - valold &= ~LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION; - - /* The double write is to overcome a hardware bug? */ - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - valold); - if (ret) - goto error_ret; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - valold); - if (ret) - goto error_ret; - st->trigger_on = false; - /* Enable requested */ - } else if (state && !currentlyset) { - /* If not set, enable requested - * first disable all events - */ - ret = lis3l02dq_disable_all_events(indio_dev); - if (ret < 0) - goto error_ret; - - valold = ret | - LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION; - - st->trigger_on = true; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - valold); - if (ret) - goto error_ret; - } - - return 0; -error_ret: - return ret; -} - -/** - * lis3l02dq_data_rdy_trigger_set_state() set datardy interrupt state - * - * If disabling the interrupt also does a final read to ensure it is clear. - * This is only important in some cases where the scan enable elements are - * switched before the buffer is reenabled. - **/ -static int lis3l02dq_data_rdy_trigger_set_state(struct iio_trigger *trig, - bool state) -{ - struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); - int ret = 0; - u8 t; - - __lis3l02dq_write_data_ready_config(indio_dev, state); - if (!state) { - /* - * A possible quirk with the handler is currently worked around - * by ensuring outstanding read events are cleared. - */ - ret = lis3l02dq_read_all(indio_dev, NULL); - } - lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_SRC_ADDR, - &t); - return ret; -} - -/** - * lis3l02dq_trig_try_reen() try reenabling irq for data rdy trigger - * @trig: the datardy trigger - */ -static int lis3l02dq_trig_try_reen(struct iio_trigger *trig) -{ - struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); - struct lis3l02dq_state *st = iio_priv(indio_dev); - int i; - - /* If gpio still high (or high again) - * In theory possible we will need to do this several times - */ - for (i = 0; i < 5; i++) - if (gpio_get_value(st->gpio)) - lis3l02dq_read_all(indio_dev, NULL); - else - break; - if (i == 5) - pr_info("Failed to clear the interrupt for lis3l02dq\n"); - - /* irq reenabled so success! */ - return 0; -} - -static const struct iio_trigger_ops lis3l02dq_trigger_ops = { - .owner = THIS_MODULE, - .set_trigger_state = &lis3l02dq_data_rdy_trigger_set_state, - .try_reenable = &lis3l02dq_trig_try_reen, -}; - -int lis3l02dq_probe_trigger(struct iio_dev *indio_dev) -{ - int ret; - struct lis3l02dq_state *st = iio_priv(indio_dev); - - st->trig = iio_trigger_alloc("lis3l02dq-dev%d", indio_dev->id); - if (!st->trig) { - ret = -ENOMEM; - goto error_ret; - } - - st->trig->dev.parent = &st->us->dev; - st->trig->ops = &lis3l02dq_trigger_ops; - iio_trigger_set_drvdata(st->trig, indio_dev); - ret = iio_trigger_register(st->trig); - if (ret) - goto error_free_trig; - - return 0; - -error_free_trig: - iio_trigger_free(st->trig); -error_ret: - return ret; -} - -void lis3l02dq_remove_trigger(struct iio_dev *indio_dev) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - - iio_trigger_unregister(st->trig); - iio_trigger_free(st->trig); -} - -void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev) -{ - iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_kfifo_free(indio_dev->buffer); -} - -static int lis3l02dq_buffer_postenable(struct iio_dev *indio_dev) -{ - /* Disable unwanted channels otherwise the interrupt will not clear */ - u8 t; - int ret; - bool oneenabled = false; - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - &t); - if (ret) - goto error_ret; - - if (test_bit(0, indio_dev->active_scan_mask)) { - t |= LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE; - oneenabled = true; - } else { - t &= ~LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE; - } - if (test_bit(1, indio_dev->active_scan_mask)) { - t |= LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE; - oneenabled = true; - } else { - t &= ~LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE; - } - if (test_bit(2, indio_dev->active_scan_mask)) { - t |= LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE; - oneenabled = true; - } else { - t &= ~LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE; - } - if (!oneenabled) /* what happens in this case is unknown */ - return -EINVAL; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - t); - if (ret) - goto error_ret; - - return iio_triggered_buffer_postenable(indio_dev); -error_ret: - return ret; -} - -/* Turn all channels on again */ -static int lis3l02dq_buffer_predisable(struct iio_dev *indio_dev) -{ - u8 t; - int ret; - - ret = iio_triggered_buffer_predisable(indio_dev); - if (ret) - goto error_ret; - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - &t); - if (ret) - goto error_ret; - t |= LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE | - LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE | - LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE; - - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - t); - -error_ret: - return ret; -} - -static const struct iio_buffer_setup_ops lis3l02dq_buffer_setup_ops = { - .postenable = &lis3l02dq_buffer_postenable, - .predisable = &lis3l02dq_buffer_predisable, -}; - -int lis3l02dq_configure_buffer(struct iio_dev *indio_dev) -{ - int ret; - struct iio_buffer *buffer; - - buffer = iio_kfifo_allocate(); - if (!buffer) - return -ENOMEM; - - iio_device_attach_buffer(indio_dev, buffer); - - buffer->scan_timestamp = true; - indio_dev->setup_ops = &lis3l02dq_buffer_setup_ops; - - /* Functions are NULL as we set handler below */ - indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time, - &lis3l02dq_trigger_handler, - 0, - indio_dev, - "lis3l02dq_consumer%d", - indio_dev->id); - - if (!indio_dev->pollfunc) { - ret = -ENOMEM; - goto error_iio_sw_rb_free; - } - - indio_dev->modes |= INDIO_BUFFER_TRIGGERED; - return 0; - -error_iio_sw_rb_free: - iio_kfifo_free(indio_dev->buffer); - return ret; -} diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c index b3f6dbf8b3a6..b5625f5d5e0e 100644 --- a/drivers/staging/iio/accel/sca3000_core.c +++ b/drivers/staging/iio/accel/sca3000_core.c @@ -774,7 +774,7 @@ static irqreturn_t sca3000_event_handler(int irq, void *private) struct iio_dev *indio_dev = private; struct sca3000_state *st = iio_priv(indio_dev); int ret, val; - s64 last_timestamp = iio_get_time_ns(); + s64 last_timestamp = iio_get_time_ns(indio_dev); /* * Could lead if badly timed to an extra read of status reg, diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c index a06b46cb81ca..2177f1dd2b5d 100644 --- a/drivers/staging/iio/adc/ad7280a.c +++ b/drivers/staging/iio/adc/ad7280a.c @@ -705,7 +705,7 @@ static irqreturn_t ad7280_event_handler(int irq, void *private) IIO_EV_DIR_RISING, IIO_EV_TYPE_THRESH, 0, 0, 0), - iio_get_time_ns()); + iio_get_time_ns(indio_dev)); else if (((channels[i] >> 11) & 0xFFF) <= st->cell_threshlow) iio_push_event(indio_dev, @@ -715,7 +715,7 @@ static irqreturn_t ad7280_event_handler(int irq, void *private) IIO_EV_DIR_FALLING, IIO_EV_TYPE_THRESH, 0, 0, 0), - iio_get_time_ns()); + iio_get_time_ns(indio_dev)); } else { if (((channels[i] >> 11) & 0xFFF) >= st->aux_threshhigh) iio_push_event(indio_dev, @@ -724,7 +724,7 @@ static irqreturn_t ad7280_event_handler(int irq, void *private) 0, IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING), - iio_get_time_ns()); + iio_get_time_ns(indio_dev)); else if (((channels[i] >> 11) & 0xFFF) <= st->aux_threshlow) iio_push_event(indio_dev, @@ -733,7 +733,7 @@ static irqreturn_t ad7280_event_handler(int irq, void *private) 0, IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING), - iio_get_time_ns()); + iio_get_time_ns(indio_dev)); } } diff --git a/drivers/staging/iio/adc/ad7606_ring.c b/drivers/staging/iio/adc/ad7606_ring.c index a6f8eb11242c..0572df9aad85 100644 --- a/drivers/staging/iio/adc/ad7606_ring.c +++ b/drivers/staging/iio/adc/ad7606_ring.c @@ -77,7 +77,8 @@ static void ad7606_poll_bh_to_ring(struct work_struct *work_s) goto done; } - iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + iio_push_to_buffers_with_timestamp(indio_dev, buf, + iio_get_time_ns(indio_dev)); done: gpio_set_value(st->pdata->gpio_convst, 0); iio_trigger_notify_done(indio_dev->trig); diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c index ac3735c7f4a9..5e8115b01011 100644 --- a/drivers/staging/iio/adc/ad7816.c +++ b/drivers/staging/iio/adc/ad7816.c @@ -253,7 +253,8 @@ static const struct attribute_group ad7816_attribute_group = { static irqreturn_t ad7816_event_handler(int irq, void *private) { - iio_push_event(private, IIO_EVENT_CODE_AD7816_OTI, iio_get_time_ns()); + iio_push_event(private, IIO_EVENT_CODE_AD7816_OTI, + iio_get_time_ns((struct iio_dev *)private)); return IRQ_HANDLED; } diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c index a10e7d8e6002..3faffe59c933 100644 --- a/drivers/staging/iio/addac/adt7316.c +++ b/drivers/staging/iio/addac/adt7316.c @@ -1752,7 +1752,7 @@ static irqreturn_t adt7316_event_handler(int irq, void *private) if ((chip->id & ID_FAMILY_MASK) != ID_ADT75XX) stat1 &= 0x1F; - time = iio_get_time_ns(); + time = iio_get_time_ns(indio_dev); if (stat1 & BIT(0)) iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_TEMP, 0, @@ -1804,7 +1804,7 @@ static irqreturn_t adt7316_event_handler(int irq, void *private) 0, IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING), - iio_get_time_ns()); + iio_get_time_ns(indio_dev)); } return IRQ_HANDLED; diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c index f6b9a10326ea..5578a077fcfb 100644 --- a/drivers/staging/iio/cdc/ad7150.c +++ b/drivers/staging/iio/cdc/ad7150.c @@ -493,7 +493,7 @@ static irqreturn_t ad7150_event_handler(int irq, void *private) struct iio_dev *indio_dev = private; struct ad7150_chip_info *chip = iio_priv(indio_dev); u8 int_status; - s64 timestamp = iio_get_time_ns(); + s64 timestamp = iio_get_time_ns(indio_dev); int ret; ret = i2c_smbus_read_byte_data(chip->client, AD7150_STATUS); diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c index d553c8e18fcc..ea15bc1c300c 100644 --- a/drivers/staging/iio/light/tsl2x7x_core.c +++ b/drivers/staging/iio/light/tsl2x7x_core.c @@ -1554,7 +1554,7 @@ static irqreturn_t tsl2x7x_event_handler(int irq, void *private) { struct iio_dev *indio_dev = private; struct tsl2X7X_chip *chip = iio_priv(indio_dev); - s64 timestamp = iio_get_time_ns(); + s64 timestamp = iio_get_time_ns(indio_dev); int ret; u8 value; |