Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
  Nothing really major in here, just lots of constant development for
  new hardware. Included in here are:

   - Thunderbolt (i.e. USB4) fixes for reported issues and support for
     new hardware types and devices

   - USB typec additions of new drivers and cleanups for some existing
     ones

   - xhci cleanups and expanded tracing support and some platform
     specific updates

   - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
     spi, and i2c drivers for that type of device (all acked by the
     respective subsystem maintainers.)

   - lots of USB gadget driver updates and cleanups

   - new USB dwc3 platforms supported, as well as other dwc3 fixes and
     cleanups

   - USB chipidea driver updates

   - other smaller driver cleanups and additions, full details in the
     shortlog

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  usb: gadget: uvc: Add missing initialization of ssp config descriptor
  usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
  usb: raw-gadget: report suspend, resume, reset, and disconnect events
  usb: raw-gadget: don't disable device if usb_ep_queue fails
  usb: raw-gadget: properly handle interrupted requests
  usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
  usb: gadget: aspeed_udc: Convert to platform remove callback returning void
  dt-bindings: usb: fsa4480: Add compatible for OCP96011
  usb: typec: fsa4480: Add support to swap SBU orientation
  dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
  usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
  Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
  Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
  thunderbolt: Fix one kernel-doc comment
  usb: gadget: f_ncm: Always set current gadget in ncm_bind()
  usb: core: Remove duplicated check in usb_hub_create_port_device
  usb: typec: tcpm: Add additional checks for contaminant
  arm64: dts: rockchip: rk3588s: Add USB3 host controller
  usb: dwc3: add optional PHY interface clocks
  dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
  ...

1 files changed, 12 insertions, 7 deletions

diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index cf9f2370878a..87e4795275fe 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -346,10 +346,14 @@ struct tb_regs_port_header {
 #define LANE_ADP_CS_1				0x01
 #define LANE_ADP_CS_1_TARGET_SPEED_MASK		GENMASK(3, 0)
 #define LANE_ADP_CS_1_TARGET_SPEED_GEN3		0xc
-#define LANE_ADP_CS_1_TARGET_WIDTH_MASK		GENMASK(9, 4)
+#define LANE_ADP_CS_1_TARGET_WIDTH_MASK		GENMASK(5, 4)
 #define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT	4
 #define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE	0x1
 #define LANE_ADP_CS_1_TARGET_WIDTH_DUAL		0x3
+#define LANE_ADP_CS_1_TARGET_WIDTH_ASYM_MASK	GENMASK(7, 6)
+#define LANE_ADP_CS_1_TARGET_WIDTH_ASYM_TX	0x1
+#define LANE_ADP_CS_1_TARGET_WIDTH_ASYM_RX	0x2
+#define LANE_ADP_CS_1_TARGET_WIDTH_ASYM_DUAL	0x0
 #define LANE_ADP_CS_1_CL0S_ENABLE		BIT(10)
 #define LANE_ADP_CS_1_CL1_ENABLE		BIT(11)
 #define LANE_ADP_CS_1_CL2_ENABLE		BIT(12)
@@ -382,12 +386,15 @@ struct tb_regs_port_header {
 #define PORT_CS_18_WOCS				BIT(16)
 #define PORT_CS_18_WODS				BIT(17)
 #define PORT_CS_18_WOU4S			BIT(18)
+#define PORT_CS_18_CSA				BIT(22)
+#define PORT_CS_18_TIP				BIT(24)
 #define PORT_CS_19				0x13
 #define PORT_CS_19_PC				BIT(3)
 #define PORT_CS_19_PID				BIT(4)
 #define PORT_CS_19_WOC				BIT(16)
 #define PORT_CS_19_WOD				BIT(17)
 #define PORT_CS_19_WOU4				BIT(18)
+#define PORT_CS_19_START_ASYM			BIT(24)
 
 /* Display Port adapter registers */
 #define ADP_DP_CS_0				0x00
@@ -400,7 +407,7 @@ struct tb_regs_port_header {
 #define ADP_DP_CS_1_AUX_RX_HOPID_SHIFT		11
 #define ADP_DP_CS_2				0x02
 #define ADP_DP_CS_2_NRD_MLC_MASK		GENMASK(2, 0)
-#define ADP_DP_CS_2_HDP				BIT(6)
+#define ADP_DP_CS_2_HPD				BIT(6)
 #define ADP_DP_CS_2_NRD_MLR_MASK		GENMASK(9, 7)
 #define ADP_DP_CS_2_NRD_MLR_SHIFT		7
 #define ADP_DP_CS_2_CA				BIT(10)
@@ -417,7 +424,7 @@ struct tb_regs_port_header {
 #define ADP_DP_CS_2_ESTIMATED_BW_MASK		GENMASK(31, 24)
 #define ADP_DP_CS_2_ESTIMATED_BW_SHIFT		24
 #define ADP_DP_CS_3				0x03
-#define ADP_DP_CS_3_HDPC			BIT(9)
+#define ADP_DP_CS_3_HPDC			BIT(9)
 #define DP_LOCAL_CAP				0x04
 #define DP_REMOTE_CAP				0x05
 /* For DP IN adapter */
@@ -484,9 +491,6 @@ struct tb_regs_port_header {
 #define ADP_USB3_CS_3				0x03
 #define ADP_USB3_CS_3_SCALE_MASK		GENMASK(5, 0)
 #define ADP_USB3_CS_4				0x04
-#define ADP_USB3_CS_4_ALR_MASK			GENMASK(6, 0)
-#define ADP_USB3_CS_4_ALR_20G			0x1
-#define ADP_USB3_CS_4_ULV			BIT(7)
 #define ADP_USB3_CS_4_MSLR_MASK			GENMASK(18, 12)
 #define ADP_USB3_CS_4_MSLR_SHIFT		12
 #define ADP_USB3_CS_4_MSLR_20G			0x1
@@ -499,7 +503,8 @@ struct tb_regs_hop {
 			  * out_port (on the incoming port of the next switch)
 			  */
 	u32 out_port:6; /* next port of the path (on the same switch) */
-	u32 initial_credits:8;
+	u32 initial_credits:7;
+	u32 pmps:1;
 	u32 unknown1:6; /* set to zero */
 	bool enable:1;