diff options
author | Lino Sanfilippo <l.sanfilippo@kunbus.com> | 2024-02-16 23:47:07 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2024-02-19 09:43:37 +0100 |
commit | f418ae73311deb901c0110b08d1bbafc20c1820e (patch) | |
tree | 1084caca234df7d2225f2a0c102fad889616a8a4 /drivers/tty/serial/stm32-usart.c | |
parent | 8b79d4e994074a058b6876dce843ee112656258d (diff) | |
download | linux-f418ae73311deb901c0110b08d1bbafc20c1820e.tar.gz linux-f418ae73311deb901c0110b08d1bbafc20c1820e.tar.bz2 linux-f418ae73311deb901c0110b08d1bbafc20c1820e.zip |
serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
Before commit 07c30ea5861f ("serial: Do not hold the port lock when setting
rx-during-tx GPIO") the SER_RS485_RX_DURING_TX flag was only set if the
rx-during-tx mode was not controlled by a GPIO. Now the flag is set
unconditionally when RS485 is enabled. This results in an incorrect setting
if the rx-during-tx GPIO is not asserted.
Fix this by setting the flag only if the rx-during-tx mode is not
controlled by a GPIO and thus restore the correct behaviour.
Cc: stable@vger.kernel.org # 6.6+
Fixes: 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240216224709.9928-1-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/stm32-usart.c')
-rw-r--r-- | drivers/tty/serial/stm32-usart.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 794b77512740..693e932d6feb 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -251,7 +251,9 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr1, port->membase + ofs->cr1); - rs485conf->flags |= SER_RS485_RX_DURING_TX; + if (!port->rs485_rx_during_tx_gpio) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + } else { stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DEM | USART_CR3_DEP); |