diff options
author | Martin K. Petersen <martin.petersen@oracle.com> | 2023-01-11 21:50:04 -0500 |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2023-01-11 21:50:04 -0500 |
commit | 3d2f12b4f0bdb87d81568154cab193785727e4b0 (patch) | |
tree | acf92eb43c10edfd5e5fc773ea75742b648e3db2 /drivers/ufs/host | |
parent | b8c328727c0d53b33f52d0e0d1dfe0051910e183 (diff) | |
parent | 39beef59128f6cf6a5d49e4c0dfd69dabe50b0c5 (diff) | |
download | linux-3d2f12b4f0bdb87d81568154cab193785727e4b0.tar.gz linux-3d2f12b4f0bdb87d81568154cab193785727e4b0.tar.bz2 linux-3d2f12b4f0bdb87d81568154cab193785727e4b0.zip |
Merge patch series "ufs: qcom: Add HS-G4 support"
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says:
This series adds HS-G4 support to the Qcom UFS driver and PHY driver.
The newer Qcom platforms support configuring the UFS controller and
PHY in dual gears (i.e., controller/PHY can be configured to run in
two gear speeds). This is accomplished by adding two different PHY
init sequences to the PHY driver and the UFS driver requesting the one
that's required based on the platform configuration.
Initially the ufs-qcom driver will use the default gear G2 for
enumerating the UFS device. Afer enumeration, the max gear supported
by both the controller and device would be found out and that will be
used thereafter. But for using the max gear after enumeration, the
ufs-qcom driver requires the UFS device to be reinitialized. For this
purpose, a separate quirk has been introduced in the UFS core along
with a callback and those will be used by the ufs-qcom driver.
This series has been tested on following platforms:
* Qcom RB5 development platform powered by SM8250 SoC
* SM8450 based dev board
* Qdrive3/sa8540p-ride board based on SC8280XP (derivative)
Link: https://lore.kernel.org/r/20221222141001.54849-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/ufs/host')
-rw-r--r-- | drivers/ufs/host/ufs-qcom.c | 172 | ||||
-rw-r--r-- | drivers/ufs/host/ufs-qcom.h | 70 |
2 files changed, 128 insertions, 114 deletions
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 4350c44a6fc7..5e7ba3b6a59d 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -101,7 +101,7 @@ static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) { - int err = 0; + int err; struct device *dev = host->hba->dev; if (host->is_lane_clks_enabled) @@ -110,7 +110,7 @@ static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk", host->rx_l0_sync_clk); if (err) - goto out; + return err; err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk", host->tx_l0_sync_clk); @@ -128,7 +128,8 @@ static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) goto disable_rx_l1; host->is_lane_clks_enabled = true; - goto out; + + return 0; disable_rx_l1: clk_disable_unprepare(host->rx_l1_sync_clk); @@ -136,7 +137,7 @@ disable_tx_l0: clk_disable_unprepare(host->tx_l0_sync_clk); disable_rx_l0: clk_disable_unprepare(host->rx_l0_sync_clk); -out: + return err; } @@ -151,25 +152,25 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk", &host->rx_l0_sync_clk, false); if (err) - goto out; + return err; err = ufs_qcom_host_clk_get(dev, "tx_lane0_sync_clk", &host->tx_l0_sync_clk, false); if (err) - goto out; + return err; /* In case of single lane per direction, don't read lane1 clocks */ if (host->hba->lanes_per_direction > 1) { err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk", &host->rx_l1_sync_clk, false); if (err) - goto out; + return err; err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk", &host->tx_l1_sync_clk, true); } -out: - return err; + + return 0; } static int ufs_qcom_check_hibern8(struct ufs_hba *hba) @@ -232,7 +233,7 @@ static int ufs_qcom_host_reset(struct ufs_hba *hba) if (!host->core_reset) { dev_warn(hba->dev, "%s: reset control not set\n", __func__); - goto out; + return 0; } reenable_intr = hba->is_irq_enabled; @@ -243,7 +244,7 @@ static int ufs_qcom_host_reset(struct ufs_hba *hba) if (ret) { dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n", __func__, ret); - goto out; + return ret; } /* @@ -265,16 +266,35 @@ static int ufs_qcom_host_reset(struct ufs_hba *hba) hba->is_irq_enabled = true; } -out: - return ret; + return 0; +} + +static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + if (host->hw_ver.major == 0x1) { + /* + * HS-G3 operations may not reliably work on legacy QCOM + * UFS host controller hardware even though capability + * exchange during link startup phase may end up + * negotiating maximum supported gear as G3. + * Hence downgrade the maximum supported gear to HS-G2. + */ + return UFS_HS_G2; + } else if (host->hw_ver.major >= 0x4) { + return UFS_QCOM_MAX_GEAR(ufshcd_readl(hba, REG_UFS_PARAM0)); + } + + /* Default is HS-G3 */ + return UFS_HS_G3; } static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct phy *phy = host->generic_phy; - int ret = 0; - bool is_rate_B = UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B; + int ret; /* Reset UFS Host Controller and PHY */ ret = ufs_qcom_host_reset(hba); @@ -282,17 +302,16 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) dev_warn(hba->dev, "%s: host reset returned %d\n", __func__, ret); - if (is_rate_B) - phy_set_mode(phy, PHY_MODE_UFS_HS_B); - /* phy initialization - calibrate the phy */ ret = phy_init(phy); if (ret) { dev_err(hba->dev, "%s: phy init failed, ret = %d\n", __func__, ret); - goto out; + return ret; } + phy_set_mode_ext(phy, PHY_MODE_UFS_HS_B, host->hs_gear); + /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); if (ret) { @@ -307,7 +326,7 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) out_disable_phy: phy_exit(phy); -out: + return ret; } @@ -365,7 +384,6 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate, bool update_link_startup_timer) { - int ret = 0; struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_clk_info *clki; u32 core_clk_period_in_ns; @@ -400,11 +418,11 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, * Aggregation logic. */ if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba)) - goto out; + return 0; if (gear == 0) { dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); - goto out_error; + return -EINVAL; } list_for_each_entry(clki, &hba->clk_list_head, list) { @@ -427,7 +445,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, } if (ufs_qcom_cap_qunipro(host)) - goto out; + return 0; core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate; core_clk_period_in_ns <<= OFFSET_CLK_NS_REG; @@ -442,7 +460,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, "%s: index %d exceeds table size %zu\n", __func__, gear, ARRAY_SIZE(hs_fr_table_rA)); - goto out_error; + return -EINVAL; } tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1]; } else if (rate == PA_HS_MODE_B) { @@ -451,13 +469,13 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, "%s: index %d exceeds table size %zu\n", __func__, gear, ARRAY_SIZE(hs_fr_table_rB)); - goto out_error; + return -EINVAL; } tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1]; } else { dev_err(hba->dev, "%s: invalid rate = %d\n", __func__, rate); - goto out_error; + return -EINVAL; } break; case SLOWAUTO_MODE: @@ -467,14 +485,14 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, "%s: index %d exceeds table size %zu\n", __func__, gear, ARRAY_SIZE(pwm_fr_table)); - goto out_error; + return -EINVAL; } tx_clk_cycles_per_us = pwm_fr_table[gear-1][1]; break; case UNCHANGED: default: dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs); - goto out_error; + return -EINVAL; } if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) != @@ -498,12 +516,8 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, */ mb(); } - goto out; -out_error: - ret = -EINVAL; -out: - return ret; + return 0; } static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, @@ -518,8 +532,7 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, 0, true)) { dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", __func__); - err = -EINVAL; - goto out; + return -EINVAL; } if (ufs_qcom_cap_qunipro(host)) @@ -545,7 +558,6 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, break; } -out: return err; } @@ -680,24 +692,18 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, struct ufs_dev_params ufs_qcom_cap; int ret = 0; + if (!dev_req_params) { + pr_err("%s: incoming dev_req_params is NULL\n", __func__); + return -EINVAL; + } + switch (status) { case PRE_CHANGE: ufshcd_init_pwr_dev_param(&ufs_qcom_cap); ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; - if (host->hw_ver.major == 0x1) { - /* - * HS-G3 operations may not reliably work on legacy QCOM - * UFS host controller hardware even though capability - * exchange during link startup phase may end up - * negotiating maximum supported gear as G3. - * Hence downgrade the maximum supported gear to HS-G2. - */ - if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2) - ufs_qcom_cap.hs_tx_gear = UFS_HS_G2; - if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2) - ufs_qcom_cap.hs_rx_gear = UFS_HS_G2; - } + /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ + ufs_qcom_cap.hs_tx_gear = ufs_qcom_cap.hs_rx_gear = ufs_qcom_get_hs_gear(hba); ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, dev_max_params, @@ -705,9 +711,12 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); - goto out; + return ret; } + /* Use the agreed gear */ + host->hs_gear = dev_req_params->gear_tx; + /* enable the device ref clock before changing to HS mode */ if (!ufshcd_is_hs_mode(&hba->pwr_info) && ufshcd_is_hs_mode(dev_req_params)) @@ -746,7 +755,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, ret = -EINVAL; break; } -out: + return ret; } @@ -758,14 +767,11 @@ static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba) err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), &pa_vs_config_reg1); if (err) - goto out; + return err; /* Allow extension of MSB bits of PA_SaveConfigTime attribute */ - err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), + return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), (pa_vs_config_reg1 | (1 << 12))); - -out: - return err; } static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba) @@ -824,6 +830,9 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP); } + + if (host->hw_ver.major > 0x3) + hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; } static void ufs_qcom_set_caps(struct ufs_hba *hba) @@ -891,8 +900,6 @@ ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) { struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); - /* Currently this code only knows about a single reset. */ - WARN_ON(id); ufs_qcom_assert_reset(host->hba); /* provide 1ms delay to let the reset pulse propagate. */ usleep_range(1000, 1100); @@ -904,8 +911,6 @@ ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) { struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); - /* Currently this code only knows about a single reset. */ - WARN_ON(id); ufs_qcom_deassert_reset(host->hba); /* @@ -942,9 +947,8 @@ static int ufs_qcom_init(struct ufs_hba *hba) host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); if (!host) { - err = -ENOMEM; dev_err(dev, "%s: no memory for qcom ufs host\n", __func__); - goto out; + return -ENOMEM; } /* Make a two way bind between the qcom host and the hba */ @@ -965,10 +969,8 @@ static int ufs_qcom_init(struct ufs_hba *hba) host->rcdev.owner = dev->driver->owner; host->rcdev.nr_resets = 1; err = devm_reset_controller_register(dev, &host->rcdev); - if (err) { + if (err) dev_warn(dev, "Failed to register reset controller\n"); - err = 0; - } if (!has_acpi_companion(dev)) { host->generic_phy = devm_phy_get(dev, "ufsphy"); @@ -1033,17 +1035,22 @@ static int ufs_qcom_init(struct ufs_hba *hba) ufs_qcom_get_default_testbus_cfg(host); err = ufs_qcom_testbus_config(host); - if (err) { + if (err) + /* Failure is non-fatal */ dev_warn(dev, "%s: failed to configure the testbus %d\n", __func__, err); - err = 0; - } - goto out; + /* + * Power up the PHY using the minimum supported gear (UFS_HS_G2). + * Switching to max gear will be performed during reinit if supported. + */ + host->hs_gear = UFS_HS_G2; + + return 0; out_variant_clear: ufshcd_set_variant(hba, NULL); -out: + return err; } @@ -1069,7 +1076,7 @@ static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &core_clk_ctrl_reg); if (err) - goto out; + return err; core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK; core_clk_ctrl_reg |= clk_cycles; @@ -1077,11 +1084,9 @@ static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, /* Clear CORE_CLK_DIV_EN */ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; - err = ufshcd_dme_set(hba, + return ufshcd_dme_set(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), core_clk_ctrl_reg); -out: - return err; } static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba) @@ -1164,7 +1169,7 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, if (err || !dev_req_params) { ufshcd_uic_hibern8_exit(hba); - goto out; + return err; } ufs_qcom_cfg_timers(hba, @@ -1175,8 +1180,7 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, ufshcd_uic_hibern8_exit(hba); } -out: - return err; + return 0; } static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host) @@ -1385,6 +1389,13 @@ static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, } #endif +static void ufs_qcom_reinit_notify(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + phy_power_off(host->generic_phy); +} + /* * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations * @@ -1408,6 +1419,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { .device_reset = ufs_qcom_device_reset, .config_scaling_param = ufs_qcom_config_scaling_param, .program_key = ufs_qcom_ice_program_key, + .reinit_notify = ufs_qcom_reinit_notify, }; /** @@ -1424,9 +1436,9 @@ static int ufs_qcom_probe(struct platform_device *pdev) /* Perform generic probe */ err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops); if (err) - dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err); + return dev_err_probe(dev, err, "ufshcd_pltfrm_init() failed\n"); - return err; + return 0; } /** diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index e567e4636357..f744a9e62002 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -17,12 +17,9 @@ #define DEFAULT_CLK_RATE_HZ 1000000 #define BUS_VECTOR_NAME_LEN 32 -#define UFS_HW_VER_MAJOR_SHFT (28) -#define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT) -#define UFS_HW_VER_MINOR_SHFT (16) -#define UFS_HW_VER_MINOR_MASK (0x0FFF << UFS_HW_VER_MINOR_SHFT) -#define UFS_HW_VER_STEP_SHFT (0) -#define UFS_HW_VER_STEP_MASK (0xFFFF << UFS_HW_VER_STEP_SHFT) +#define UFS_HW_VER_MAJOR_MASK GENMASK(31, 28) +#define UFS_HW_VER_MINOR_MASK GENMASK(27, 16) +#define UFS_HW_VER_STEP_MASK GENMASK(15, 0) /* vendor specific pre-defined parameters */ #define SLOW 1 @@ -36,7 +33,8 @@ enum { REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4, REG_UFS_LOCAL_PORT_ID_REG = 0xC8, REG_UFS_PA_ERR_CODE = 0xCC, - REG_UFS_RETRY_TIMER_REG = 0xD0, + /* On older UFS revisions, this register is called "RETRY_TIMER_REG" */ + REG_UFS_PARAM0 = 0xD0, REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8, REG_UFS_CFG1 = 0xDC, REG_UFS_CFG2 = 0xE0, @@ -76,24 +74,32 @@ enum { #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x) /* bit definitions for REG_UFS_CFG1 register */ -#define QUNIPRO_SEL 0x1 -#define UTP_DBG_RAMS_EN 0x20000 +#define QUNIPRO_SEL BIT(0) +#define UFS_PHY_SOFT_RESET BIT(1) +#define UTP_DBG_RAMS_EN BIT(17) #define TEST_BUS_EN BIT(18) #define TEST_BUS_SEL GENMASK(22, 19) #define UFS_REG_TEST_BUS_EN BIT(30) +#define UFS_PHY_RESET_ENABLE 1 +#define UFS_PHY_RESET_DISABLE 0 + /* bit definitions for REG_UFS_CFG2 register */ -#define UAWM_HW_CGC_EN (1 << 0) -#define UARM_HW_CGC_EN (1 << 1) -#define TXUC_HW_CGC_EN (1 << 2) -#define RXUC_HW_CGC_EN (1 << 3) -#define DFC_HW_CGC_EN (1 << 4) -#define TRLUT_HW_CGC_EN (1 << 5) -#define TMRLUT_HW_CGC_EN (1 << 6) -#define OCSC_HW_CGC_EN (1 << 7) +#define UAWM_HW_CGC_EN BIT(0) +#define UARM_HW_CGC_EN BIT(1) +#define TXUC_HW_CGC_EN BIT(2) +#define RXUC_HW_CGC_EN BIT(3) +#define DFC_HW_CGC_EN BIT(4) +#define TRLUT_HW_CGC_EN BIT(5) +#define TMRLUT_HW_CGC_EN BIT(6) +#define OCSC_HW_CGC_EN BIT(7) + +/* bit definitions for REG_UFS_PARAM0 */ +#define MAX_HS_GEAR_MASK GENMASK(6, 4) +#define UFS_QCOM_MAX_GEAR(x) FIELD_GET(MAX_HS_GEAR_MASK, (x)) /* bit definition for UFS_UFS_TEST_BUS_CTRL_n */ -#define TEST_BUS_SUB_SEL_MASK 0x1F /* All XXX_SEL fields are 5 bits wide */ +#define TEST_BUS_SUB_SEL_MASK GENMASK(4, 0) /* All XXX_SEL fields are 5 bits wide */ #define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\ TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\ @@ -101,17 +107,11 @@ enum { TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN) /* bit offset */ -enum { - OFFSET_UFS_PHY_SOFT_RESET = 1, - OFFSET_CLK_NS_REG = 10, -}; +#define OFFSET_CLK_NS_REG 0xa /* bit masks */ -enum { - MASK_UFS_PHY_SOFT_RESET = 0x2, - MASK_TX_SYMBOL_CLK_1US_REG = 0x3FF, - MASK_CLK_NS_REG = 0xFFFC00, -}; +#define MASK_TX_SYMBOL_CLK_1US_REG GENMASK(9, 0) +#define MASK_CLK_NS_REG GENMASK(23, 10) /* QUniPro Vendor specific attributes */ #define PA_VS_CONFIG_REG1 0x9000 @@ -126,15 +126,15 @@ ufs_qcom_get_controller_revision(struct ufs_hba *hba, { u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION); - *major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT; - *minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT; - *step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT; + *major = FIELD_GET(UFS_HW_VER_MAJOR_MASK, ver); + *minor = FIELD_GET(UFS_HW_VER_MINOR_MASK, ver); + *step = FIELD_GET(UFS_HW_VER_STEP_MASK, ver); }; static inline void ufs_qcom_assert_reset(struct ufs_hba *hba) { - ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET, - 1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1); + ufshcd_rmwl(hba, UFS_PHY_SOFT_RESET, FIELD_PREP(UFS_PHY_SOFT_RESET, UFS_PHY_RESET_ENABLE), + REG_UFS_CFG1); /* * Make sure assertion of ufs phy reset is written to @@ -145,8 +145,8 @@ static inline void ufs_qcom_assert_reset(struct ufs_hba *hba) static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba) { - ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET, - 0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1); + ufshcd_rmwl(hba, UFS_PHY_SOFT_RESET, FIELD_PREP(UFS_PHY_SOFT_RESET, UFS_PHY_RESET_DISABLE), + REG_UFS_CFG1); /* * Make sure de-assertion of ufs phy reset is written to @@ -210,6 +210,8 @@ struct ufs_qcom_host { struct reset_controller_dev rcdev; struct gpio_desc *device_reset; + + u32 hs_gear; }; static inline u32 |