diff options
author | Thinh Nguyen <Thinh.Nguyen@synopsys.com> | 2019-08-09 12:15:52 -0700 |
---|---|---|
committer | Felipe Balbi <felipe.balbi@linux.intel.com> | 2019-10-22 10:26:45 +0300 |
commit | 9ba3aca8fe82318805709036bd50bee64570088b (patch) | |
tree | 953f911554e2642404345324ffe9239a1dd40050 /drivers/usb/dwc3 | |
parent | 7d194c2100ad2a6dded545887d02754948ca5241 (diff) | |
download | linux-9ba3aca8fe82318805709036bd50bee64570088b.tar.gz linux-9ba3aca8fe82318805709036bd50bee64570088b.tar.bz2 linux-9ba3aca8fe82318805709036bd50bee64570088b.zip |
usb: dwc3: Disable phy suspend after power-on reset
For DRD controllers, the programming guide recommended that
GUSB3PIPECTL.SUSPENDABLE and GUSB2PHYCFG.SUSPHY to be cleared after
power-on reset and only set after the controller initialization is
completed. This can be done after device soft-reset in dwc3_core_init().
This patch makes sure to clear GUSB3PIPECTL.SUSPENDABLE and
GUSB2PHYCFG.SUSPHY before core initialization and only set them after
the device soft-reset is completed.
Reference: DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section
1.2.49 and 1.2.45
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r-- | drivers/usb/dwc3/core.c | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 999ce5e84d3c..2991e5056600 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -567,8 +567,11 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) */ static int dwc3_phy_setup(struct dwc3 *dwc) { + unsigned int hw_mode; u32 reg; + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); /* @@ -586,6 +589,14 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->revision > DWC3_REVISION_194A) reg |= DWC3_GUSB3PIPECTL_SUSPHY; + /* + * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be cleared after + * power-on reset, and it can be set after core initialization, which is + * after device soft-reset during initialization. + */ + if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD) + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + if (dwc->u2ss_inp3_quirk) reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; @@ -669,6 +680,14 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->revision > DWC3_REVISION_194A) reg |= DWC3_GUSB2PHYCFG_SUSPHY; + /* + * For DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared after + * power-on reset, and it can be set after core initialization, which is + * after device soft-reset during initialization. + */ + if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + if (dwc->dis_u2_susphy_quirk) reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; @@ -903,9 +922,12 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc) */ static int dwc3_core_init(struct dwc3 *dwc) { + unsigned int hw_mode; u32 reg; int ret; + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + /* * Write Linux Version Code to our GUID register so it's easy to figure * out which kernel version a bug was found. @@ -941,6 +963,21 @@ static int dwc3_core_init(struct dwc3 *dwc) if (ret) goto err0a; + if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && + dwc->revision > DWC3_REVISION_194A) { + if (!dwc->dis_u3_susphy_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + } + + if (!dwc->dis_u2_susphy_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } + } + dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); |