diff options
author | Arnd Bergmann <arnd@arndb.de> | 2018-03-09 17:37:54 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2018-03-26 15:57:12 +0200 |
commit | a9762b704f5d5e167bbc261573621782b90efbc4 (patch) | |
tree | 28bfb99ac7c73aa508701c4d9b361998e87f439b /drivers/usb | |
parent | 03f4c9abd73284193f70e64da1a266d393650530 (diff) | |
download | linux-a9762b704f5d5e167bbc261573621782b90efbc4.tar.gz linux-a9762b704f5d5e167bbc261573621782b90efbc4.tar.bz2 linux-a9762b704f5d5e167bbc261573621782b90efbc4.zip |
usb: musb: remove blackfin port
The blackfin architecture is getting removed, so we can clean up
all the special cases in the musb driver.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Acked-by: Bin Liu <b-liu@ti.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
[arnd: adding in fixups from Aaron and Stephen]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/musb/Kconfig | 12 | ||||
-rw-r--r-- | drivers/usb/musb/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/musb/blackfin.c | 623 | ||||
-rw-r--r-- | drivers/usb/musb/blackfin.h | 81 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.c | 7 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.h | 43 | ||||
-rw-r--r-- | drivers/usb/musb/musb_debugfs.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_dma.h | 11 | ||||
-rw-r--r-- | drivers/usb/musb/musb_gadget.c | 56 | ||||
-rw-r--r-- | drivers/usb/musb/musb_host.c | 12 | ||||
-rw-r--r-- | drivers/usb/musb/musb_regs.h | 182 | ||||
-rw-r--r-- | drivers/usb/musb/musbhsdma.c | 5 | ||||
-rw-r--r-- | drivers/usb/musb/musbhsdma.h | 64 |
13 files changed, 13 insertions, 1086 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index e757afc1cfd0..ad08895e78f9 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -5,7 +5,7 @@ # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC - tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)' + tristate 'Inventra Highspeed Dual Role Controller' depends on (USB || USB_GADGET) depends on HAS_IOMEM help @@ -18,9 +18,6 @@ config USB_MUSB_HDRC Texas Instruments families using this IP include DaVinci (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. - Analog Devices parts using this IP include Blackfin BF54x, - BF525 and BF527. - Allwinner SoCs using this IP include A10, A13, A20, ... If you do not know what this is, please say N. @@ -107,11 +104,6 @@ config USB_MUSB_DSPS depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on OF_IRQ -config USB_MUSB_BLACKFIN - tristate "Blackfin" - depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523) - depends on NOP_USB_XCEIV - config USB_MUSB_UX500 tristate "Ux500 platforms" depends on ARCH_U8500 || COMPILE_TEST @@ -149,7 +141,7 @@ config USB_UX500_DMA config USB_INVENTRA_DMA bool 'Inventra' - depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN + depends on USB_MUSB_OMAP2PLUS help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile index 79d4d5439164..3a88c79e650c 100644 --- a/drivers/usb/musb/Makefile +++ b/drivers/usb/musb/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o -obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o obj-$(CONFIG_USB_MUSB_UX500) += ux500.o obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c deleted file mode 100644 index 0a98dcd66d19..000000000000 --- a/drivers/usb/musb/blackfin.c +++ /dev/null @@ -1,623 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * MUSB OTG controller driver for Blackfin Processors - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/list.h> -#include <linux/gpio.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/prefetch.h> -#include <linux/usb/usb_phy_generic.h> - -#include <asm/cacheflush.h> - -#include "musb_core.h" -#include "musbhsdma.h" -#include "blackfin.h" - -struct bfin_glue { - struct device *dev; - struct platform_device *musb; - struct platform_device *phy; -}; -#define glue_to_musb(g) platform_get_drvdata(g->musb) - -static u32 bfin_fifo_offset(u8 epnum) -{ - return USB_OFFSET(USB_EP0_FIFO) + (epnum * 8); -} - -static u8 bfin_readb(const void __iomem *addr, unsigned offset) -{ - return (u8)(bfin_read16(addr + offset)); -} - -static u16 bfin_readw(const void __iomem *addr, unsigned offset) -{ - return bfin_read16(addr + offset); -} - -static u32 bfin_readl(const void __iomem *addr, unsigned offset) -{ - return (u32)(bfin_read16(addr + offset)); -} - -static void bfin_writeb(void __iomem *addr, unsigned offset, u8 data) -{ - bfin_write16(addr + offset, (u16)data); -} - -static void bfin_writew(void __iomem *addr, unsigned offset, u16 data) -{ - bfin_write16(addr + offset, data); -} - -static void bfin_writel(void __iomem *addr, unsigned offset, u32 data) -{ - bfin_write16(addr + offset, (u16)data); -} - -/* - * Load an endpoint's FIFO - */ -static void bfin_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) -{ - struct musb *musb = hw_ep->musb; - void __iomem *fifo = hw_ep->fifo; - void __iomem *epio = hw_ep->regs; - u8 epnum = hw_ep->epnum; - - prefetch((u8 *)src); - - musb_writew(epio, MUSB_TXCOUNT, len); - - dev_dbg(musb->controller, "TX ep%d fifo %p count %d buf %p, epio %p\n", - hw_ep->epnum, fifo, len, src, epio); - - dump_fifo_data(src, len); - - if (!ANOMALY_05000380 && epnum != 0) { - u16 dma_reg; - - flush_dcache_range((unsigned long)src, - (unsigned long)(src + len)); - - /* Setup DMA address register */ - dma_reg = (u32)src; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); - SSYNC(); - - dma_reg = (u32)src >> 16; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); - SSYNC(); - - /* Setup DMA count register */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); - SSYNC(); - - /* Enable the DMA */ - dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); - SSYNC(); - - /* Wait for complete */ - while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) - cpu_relax(); - - /* acknowledge dma interrupt */ - bfin_write_USB_DMA_INTERRUPT(1 << epnum); - SSYNC(); - - /* Reset DMA */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); - SSYNC(); - } else { - SSYNC(); - - if (unlikely((unsigned long)src & 0x01)) - outsw_8((unsigned long)fifo, src, (len + 1) >> 1); - else - outsw((unsigned long)fifo, src, (len + 1) >> 1); - } -} -/* - * Unload an endpoint's FIFO - */ -static void bfin_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) -{ - struct musb *musb = hw_ep->musb; - void __iomem *fifo = hw_ep->fifo; - u8 epnum = hw_ep->epnum; - - if (ANOMALY_05000467 && epnum != 0) { - u16 dma_reg; - - invalidate_dcache_range((unsigned long)dst, - (unsigned long)(dst + len)); - - /* Setup DMA address register */ - dma_reg = (u32)dst; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); - SSYNC(); - - dma_reg = (u32)dst >> 16; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); - SSYNC(); - - /* Setup DMA count register */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); - SSYNC(); - - /* Enable the DMA */ - dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); - SSYNC(); - - /* Wait for complete */ - while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) - cpu_relax(); - - /* acknowledge dma interrupt */ - bfin_write_USB_DMA_INTERRUPT(1 << epnum); - SSYNC(); - - /* Reset DMA */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); - SSYNC(); - } else { - SSYNC(); - /* Read the last byte of packet with odd size from address fifo + 4 - * to trigger 1 byte access to EP0 FIFO. - */ - if (len == 1) - *dst = (u8)inw((unsigned long)fifo + 4); - else { - if (unlikely((unsigned long)dst & 0x01)) - insw_8((unsigned long)fifo, dst, len >> 1); - else - insw((unsigned long)fifo, dst, len >> 1); - - if (len & 0x01) - *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4); - } - } - dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", - 'R', hw_ep->epnum, fifo, len, dst); - - dump_fifo_data(dst, len); -} - -static irqreturn_t blackfin_interrupt(int irq, void *__hci) -{ - unsigned long flags; - irqreturn_t retval = IRQ_NONE; - struct musb *musb = __hci; - - spin_lock_irqsave(&musb->lock, flags); - - musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); - musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); - musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); - - if (musb->int_usb || musb->int_tx || musb->int_rx) { - musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb); - musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx); - musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx); - retval = musb_interrupt(musb); - } - - /* Start sampling ID pin, when plug is removed from MUSB */ - if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE - || musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) || - (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) { - mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY); - musb->a_wait_bcon = TIMER_DELAY; - } - - spin_unlock_irqrestore(&musb->lock, flags); - - return retval; -} - -static void musb_conn_timer_handler(struct timer_list *t) -{ - struct musb *musb = from_timer(musb, t, dev_timer); - unsigned long flags; - u16 val; - static u8 toggle; - - spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_IDLE: - case OTG_STATE_A_WAIT_BCON: - /* Start a new session */ - val = musb_readw(musb->mregs, MUSB_DEVCTL); - val &= ~MUSB_DEVCTL_SESSION; - musb_writew(musb->mregs, MUSB_DEVCTL, val); - val |= MUSB_DEVCTL_SESSION; - musb_writew(musb->mregs, MUSB_DEVCTL, val); - /* Check if musb is host or peripheral. */ - val = musb_readw(musb->mregs, MUSB_DEVCTL); - - if (!(val & MUSB_DEVCTL_BDEVICE)) { - gpio_set_value(musb->config->gpio_vrsel, 1); - musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; - } else { - gpio_set_value(musb->config->gpio_vrsel, 0); - /* Ignore VBUSERROR and SUSPEND IRQ */ - val = musb_readb(musb->mregs, MUSB_INTRUSBE); - val &= ~MUSB_INTR_VBUSERROR; - musb_writeb(musb->mregs, MUSB_INTRUSBE, val); - - val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR; - musb_writeb(musb->mregs, MUSB_INTRUSB, val); - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - } - mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY); - break; - case OTG_STATE_B_IDLE: - /* - * Start a new session. It seems that MUSB needs taking - * some time to recognize the type of the plug inserted? - */ - val = musb_readw(musb->mregs, MUSB_DEVCTL); - val |= MUSB_DEVCTL_SESSION; - musb_writew(musb->mregs, MUSB_DEVCTL, val); - val = musb_readw(musb->mregs, MUSB_DEVCTL); - - if (!(val & MUSB_DEVCTL_BDEVICE)) { - gpio_set_value(musb->config->gpio_vrsel, 1); - musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; - } else { - gpio_set_value(musb->config->gpio_vrsel, 0); - - /* Ignore VBUSERROR and SUSPEND IRQ */ - val = musb_readb(musb->mregs, MUSB_INTRUSBE); - val &= ~MUSB_INTR_VBUSERROR; - musb_writeb(musb->mregs, MUSB_INTRUSBE, val); - - val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR; - musb_writeb(musb->mregs, MUSB_INTRUSB, val); - - /* Toggle the Soft Conn bit, so that we can response to - * the inserting of either A-plug or B-plug. - */ - if (toggle) { - val = musb_readb(musb->mregs, MUSB_POWER); - val &= ~MUSB_POWER_SOFTCONN; - musb_writeb(musb->mregs, MUSB_POWER, val); - toggle = 0; - } else { - val = musb_readb(musb->mregs, MUSB_POWER); - val |= MUSB_POWER_SOFTCONN; - musb_writeb(musb->mregs, MUSB_POWER, val); - toggle = 1; - } - /* The delay time is set to 1/4 second by default, - * shortening it, if accelerating A-plug detection - * is needed in OTG mode. - */ - mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY / 4); - } - break; - default: - dev_dbg(musb->controller, "%s state not handled\n", - usb_otg_state_string(musb->xceiv->otg->state)); - break; - } - spin_unlock_irqrestore(&musb->lock, flags); - - dev_dbg(musb->controller, "state is %s\n", - usb_otg_state_string(musb->xceiv->otg->state)); -} - -static void bfin_musb_enable(struct musb *musb) -{ - /* REVISIT is this really correct ? */ -} - -static void bfin_musb_disable(struct musb *musb) -{ -} - -static void bfin_musb_set_vbus(struct musb *musb, int is_on) -{ - int value = musb->config->gpio_vrsel_active; - if (!is_on) - value = !value; - gpio_set_value(musb->config->gpio_vrsel, value); - - dev_dbg(musb->controller, "VBUS %s, devctl %02x " - /* otg %3x conf %08x prcm %08x */ "\n", - usb_otg_state_string(musb->xceiv->otg->state), - musb_readb(musb->mregs, MUSB_DEVCTL)); -} - -static int bfin_musb_set_power(struct usb_phy *x, unsigned mA) -{ - return 0; -} - -static int bfin_musb_vbus_status(struct musb *musb) -{ - return 0; -} - -static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode) -{ - return -EIO; -} - -static int bfin_musb_adjust_channel_params(struct dma_channel *channel, - u16 packet_sz, u8 *mode, - dma_addr_t *dma_addr, u32 *len) -{ - struct musb_dma_channel *musb_channel = channel->private_data; - - /* - * Anomaly 05000450 might cause data corruption when using DMA - * MODE 1 transmits with short packet. So to work around this, - * we truncate all MODE 1 transfers down to a multiple of the - * max packet size, and then do the last short packet transfer - * (if there is any) using MODE 0. - */ - if (ANOMALY_05000450) { - if (musb_channel->transmit && *mode == 1) - *len = *len - (*len % packet_sz); - } - - return 0; -} - -static void bfin_musb_reg_init(struct musb *musb) -{ - if (ANOMALY_05000346) { - bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value); - SSYNC(); - } - - if (ANOMALY_05000347) { - bfin_write_USB_APHY_CNTRL(0x0); - SSYNC(); - } - - /* Configure PLL oscillator register */ - bfin_write_USB_PLLOSC_CTRL(0x3080 | - ((480/musb->config->clkin) << 1)); - SSYNC(); - - bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1); - SSYNC(); - - bfin_write_USB_EP_NI0_RXMAXP(64); - SSYNC(); - - bfin_write_USB_EP_NI0_TXMAXP(64); - SSYNC(); - - /* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/ - bfin_write_USB_GLOBINTR(0x7); - SSYNC(); - - bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA | - EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA | - EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA | - EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA | - EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA); - SSYNC(); -} - -static int bfin_musb_init(struct musb *musb) -{ - - /* - * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE - * and OTG HOST modes, while rev 1.1 and greater require PE7 to - * be low for DEVICE mode and high for HOST mode. We set it high - * here because we are in host mode - */ - - if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) { - printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n", - musb->config->gpio_vrsel); - return -ENODEV; - } - gpio_direction_output(musb->config->gpio_vrsel, 0); - - musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(musb->xceiv)) { - gpio_free(musb->config->gpio_vrsel); - return -EPROBE_DEFER; - } - - bfin_musb_reg_init(musb); - - timer_setup(&musb->dev_timer, musb_conn_timer_handler, 0); - - musb->xceiv->set_power = bfin_musb_set_power; - - musb->isr = blackfin_interrupt; - musb->double_buffer_not_ok = true; - - return 0; -} - -static int bfin_musb_exit(struct musb *musb) -{ - gpio_free(musb->config->gpio_vrsel); - usb_put_phy(musb->xceiv); - - return 0; -} - -static const struct musb_platform_ops bfin_ops = { - .quirks = MUSB_DMA_INVENTRA, - .init = bfin_musb_init, - .exit = bfin_musb_exit, - - .fifo_offset = bfin_fifo_offset, - .readb = bfin_readb, - .writeb = bfin_writeb, - .readw = bfin_readw, - .writew = bfin_writew, - .readl = bfin_readl, - .writel = bfin_writel, - .fifo_mode = 2, - .read_fifo = bfin_read_fifo, - .write_fifo = bfin_write_fifo, -#ifdef CONFIG_USB_INVENTRA_DMA - .dma_init = musbhs_dma_controller_create, - .dma_exit = musbhs_dma_controller_destroy, -#endif - .enable = bfin_musb_enable, - .disable = bfin_musb_disable, - - .set_mode = bfin_musb_set_mode, - - .vbus_status = bfin_musb_vbus_status, - .set_vbus = bfin_musb_set_vbus, - - .adjust_channel_params = bfin_musb_adjust_channel_params, -}; - -static u64 bfin_dmamask = DMA_BIT_MASK(32); - -static int bfin_probe(struct platform_device *pdev) -{ - struct resource musb_resources[2]; - struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct platform_device *musb; - struct bfin_glue *glue; - - int ret = -ENOMEM; - - glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) - goto err0; - - musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); - if (!musb) - goto err0; - - musb->dev.parent = &pdev->dev; - musb->dev.dma_mask = &bfin_dmamask; - musb->dev.coherent_dma_mask = bfin_dmamask; - - glue->dev = &pdev->dev; - glue->musb = musb; - - pdata->platform_ops = &bfin_ops; - - glue->phy = usb_phy_generic_register(); - if (IS_ERR(glue->phy)) - goto err1; - platform_set_drvdata(pdev, glue); - - memset(musb_resources, 0x00, sizeof(*musb_resources) * - ARRAY_SIZE(musb_resources)); - - musb_resources[0].name = pdev->resource[0].name; - musb_resources[0].start = pdev->resource[0].start; - musb_resources[0].end = pdev->resource[0].end; - musb_resources[0].flags = pdev->resource[0].flags; - - musb_resources[1].name = pdev->resource[1].name; - musb_resources[1].start = pdev->resource[1].start; - musb_resources[1].end = pdev->resource[1].end; - musb_resources[1].flags = pdev->resource[1].flags; - - ret = platform_device_add_resources(musb, musb_resources, - ARRAY_SIZE(musb_resources)); - if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); - goto err2; - } - - ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); - if (ret) { - dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err2; - } - - ret = platform_device_add(musb); - if (ret) { - dev_err(&pdev->dev, "failed to register musb device\n"); - goto err2; - } - - return 0; - -err2: - usb_phy_generic_unregister(glue->phy); - -err1: - platform_device_put(musb); - -err0: - return ret; -} - -static int bfin_remove(struct platform_device *pdev) -{ - struct bfin_glue *glue = platform_get_drvdata(pdev); - - platform_device_unregister(glue->musb); - usb_phy_generic_unregister(glue->phy); - - return 0; -} - -static int __maybe_unused bfin_suspend(struct device *dev) -{ - struct bfin_glue *glue = dev_get_drvdata(dev); - struct musb *musb = glue_to_musb(glue); - - if (is_host_active(musb)) - /* - * During hibernate gpio_vrsel will change from high to low - * low which will generate wakeup event resume the system - * immediately. Set it to 0 before hibernate to avoid this - * wakeup event. - */ - gpio_set_value(musb->config->gpio_vrsel, 0); - - return 0; -} - -static int __maybe_unused bfin_resume(struct device *dev) -{ - struct bfin_glue *glue = dev_get_drvdata(dev); - struct musb *musb = glue_to_musb(glue); - - bfin_musb_reg_init(musb); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume); - -static struct platform_driver bfin_driver = { - .probe = bfin_probe, - .remove = bfin_remove, - .driver = { - .name = "musb-blackfin", - .pm = &bfin_pm_ops, - }, -}; - -MODULE_DESCRIPTION("Blackfin MUSB Glue Layer"); -MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>"); -MODULE_LICENSE("GPL v2"); -module_platform_driver(bfin_driver); diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h deleted file mode 100644 index 5b149915b0f8..000000000000 --- a/drivers/usb/musb/blackfin.h +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2007 by Analog Devices, Inc. - */ - -#ifndef __MUSB_BLACKFIN_H__ -#define __MUSB_BLACKFIN_H__ - -/* - * Blackfin specific definitions - */ - -/* Anomalies notes: - * - * 05000450 - USB DMA Mode 1 Short Packet Data Corruption: - * MUSB driver is designed to transfer buffer of N * maxpacket size - * in DMA mode 1 and leave the rest of the data to the next - * transfer in DMA mode 0, so we never transmit a short packet in - * DMA mode 1. - * - * 05000463 - This anomaly doesn't affect this driver since it - * never uses L1 or L2 memory as data destination. - * - * 05000464 - This anomaly doesn't affect this driver since it - * never uses L1 or L2 memory as data source. - * - * 05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is - * no way to workaround for bulk endpoints. Since the wMaxPackSize - * of bulk is less than or equal to 512, while the fifo size of - * endpoint 5, 6, 7 is 1024, the double buffer mode is enabled - * automatically when these endpoints are used for bulk OUT. - * - * 05000466 - This anomaly doesn't affect this driver since it never mixes - * concurrent DMA and core accesses to the TX endpoint FIFOs. - * - * 05000467 - The workaround for this anomaly will introduce another - * anomaly - 05000465. - */ - -/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be - * unstable in host mode. This may be caused by Anomaly 05000380. After - * digging out the root cause, we will change this number accordingly. - * So, need to either use silicon v0.2+ or disable DMA mode in MUSB. - */ -#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \ - !defined(CONFIG_MUSB_PIO_ONLY) -# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1" -#endif - -#undef DUMP_FIFO_DATA -#ifdef DUMP_FIFO_DATA -static void dump_fifo_data(u8 *buf, u16 len) -{ - u8 *tmp = buf; - int i; - - for (i = 0; i < len; i++) { - if (!(i % 16) && i) - pr_debug("\n"); - pr_debug("%02x ", *tmp++); - } - pr_debug("\n"); -} -#else -#define dump_fifo_data(buf, len) do {} while (0) -#endif - - -#define USB_DMA_BASE USB_DMA_INTERRUPT -#define USB_DMAx_CTRL 0x04 -#define USB_DMAx_ADDR_LOW 0x08 -#define USB_DMAx_ADDR_HIGH 0x0C -#define USB_DMAx_COUNT_LOW 0x10 -#define USB_DMAx_COUNT_HIGH 0x14 - -#define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg) - -/* Almost 1 second */ -#define TIMER_DELAY (1 * HZ) - -#endif /* __MUSB_BLACKFIN_H__ */ diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index eef4ad578b31..13486588e561 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -126,7 +126,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode); /*-------------------------------------------------------------------------*/ -#ifndef CONFIG_BLACKFIN static int musb_ulpi_read(struct usb_phy *phy, u32 reg) { void __iomem *addr = phy->io_priv; @@ -208,10 +207,6 @@ out: return ret; } -#else -#define musb_ulpi_read NULL -#define musb_ulpi_write NULL -#endif static struct usb_phy_io_ops musb_ulpi_access = { .read = musb_ulpi_read, @@ -2171,7 +2166,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) * - initializes musb->xceiv, usually by otg_get_phy() * - stops powering VBUS * - * There are various transceiver configurations. Blackfin, + * There are various transceiver configurations. * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses * external/discrete ones in various flavors (twl4030 family, * isp1504, non-OTG, etc) mostly hooking up through ULPI. diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 385841ee6f46..8a74cb2907f8 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -414,19 +414,6 @@ struct musb { struct usb_gadget_driver *gadget_driver; /* its driver */ struct usb_hcd *hcd; /* the usb hcd */ - /* - * FIXME: Remove this flag. - * - * This is only added to allow Blackfin to work - * with current driver. For some unknown reason - * Blackfin doesn't work with double buffering - * and that's enabled by default. - * - * We added this flag to forcefully disable double - * buffering until we get it working. - */ - unsigned double_buffer_not_ok:1; - const struct musb_hdrc_config *config; int xceiv_old_state; @@ -467,34 +454,6 @@ static inline char *musb_ep_xfertype_string(u8 type) return s; } -#ifdef CONFIG_BLACKFIN -static inline int musb_read_fifosize(struct musb *musb, - struct musb_hw_ep *hw_ep, u8 epnum) -{ - musb->nr_endpoints++; - musb->epmask |= (1 << epnum); - - if (epnum < 5) { - hw_ep->max_packet_sz_tx = 128; - hw_ep->max_packet_sz_rx = 128; - } else { - hw_ep->max_packet_sz_tx = 1024; - hw_ep->max_packet_sz_rx = 1024; - } - hw_ep->is_shared_fifo = false; - - return 0; -} - -static inline void musb_configure_ep0(struct musb *musb) -{ - musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; - musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; - musb->endpoints[0].is_shared_fifo = true; -} - -#else - static inline int musb_read_fifosize(struct musb *musb, struct musb_hw_ep *hw_ep, u8 epnum) { @@ -531,8 +490,6 @@ static inline void musb_configure_ep0(struct musb *musb) musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; musb->endpoints[0].is_shared_fifo = true; } -#endif /* CONFIG_BLACKFIN */ - /***************************** Glue it together *****************************/ diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 7cf5a1bbdaff..7dac456f7ebc 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -70,7 +70,6 @@ static const struct musb_register_map musb_regmap[] = { { "DMA_CNTLch7", 0x274, 16 }, { "DMA_ADDRch7", 0x278, 32 }, { "DMA_COUNTch7", 0x27C, 32 }, -#ifndef CONFIG_BLACKFIN { "ConfigData", MUSB_CONFIGDATA,8 }, { "BabbleCtl", MUSB_BABBLE_CTL,8 }, { "TxFIFOsz", MUSB_TXFIFOSZ, 8 }, @@ -79,7 +78,6 @@ static const struct musb_register_map musb_regmap[] = { { "RxFIFOadd", MUSB_RXFIFOADD, 16 }, { "EPInfo", MUSB_EPINFO, 8 }, { "RAMInfo", MUSB_RAMINFO, 8 }, -#endif { } /* Terminating Entry */ }; diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index a4241f4d430e..0fc8cd0c2a5c 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -80,17 +80,6 @@ struct musb_hw_ep; #define is_cppi_enabled(musb) 0 #endif -/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1 - * Only allow DMA mode 1 to be used when the USB will actually generate the - * interrupts we expect. - */ -#ifdef CONFIG_BLACKFIN -# undef USE_MODE1 -# if !ANOMALY_05000456 -# define USE_MODE1 -# endif -#endif - /* * DMA channel status ... updated by the dma controller driver whenever that * status changes, and protected by the overall controller spinlock. diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 293e5b8da565..e564695c6c8d 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -995,15 +995,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set TXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - if (musb->double_buffer_not_ok) { - musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); - } else { - if (can_bulk_split(musb, musb_ep->type)) - musb_ep->hb_mult = (hw_ep->max_packet_sz_tx / - musb_ep->packet_sz) - 1; - musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz - | (musb_ep->hb_mult << 11)); - } + if (can_bulk_split(musb, musb_ep->type)) + musb_ep->hb_mult = (hw_ep->max_packet_sz_tx / + musb_ep->packet_sz) - 1; + musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -1038,11 +1034,8 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - if (musb->double_buffer_not_ok) - musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx); - else - musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz - | (musb_ep->hb_mult << 11)); + musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { @@ -1680,40 +1673,6 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) return 0; } -#ifdef CONFIG_BLACKFIN -static struct usb_ep *musb_match_ep(struct usb_gadget *g, - struct usb_endpoint_descriptor *desc, - struct usb_ss_ep_comp_descriptor *ep_comp) -{ - struct usb_ep *ep = NULL; - - switch (usb_endpoint_type(desc)) { - case USB_ENDPOINT_XFER_ISOC: - case USB_ENDPOINT_XFER_BULK: - if (usb_endpoint_dir_in(desc)) - ep = gadget_find_ep_by_name(g, "ep5in"); - else - ep = gadget_find_ep_by_name(g, "ep6out"); - break; - case USB_ENDPOINT_XFER_INT: - if (usb_endpoint_dir_in(desc)) - ep = gadget_find_ep_by_name(g, "ep1in"); - else - ep = gadget_find_ep_by_name(g, "ep2out"); - break; - default: - break; - } - - if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp)) - return ep; - - return NULL; -} -#else -#define musb_match_ep NULL -#endif - static int musb_gadget_start(struct usb_gadget *g, struct usb_gadget_driver *driver); static int musb_gadget_stop(struct usb_gadget *g); @@ -1727,7 +1686,6 @@ static const struct usb_gadget_ops musb_gadget_operations = { .pullup = musb_gadget_pullup, .udc_start = musb_gadget_start, .udc_stop = musb_gadget_stop, - .match_ep = musb_match_ep, }; /* ----------------------------------------------------------------------- */ diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 45ed32c2cba9..3a8451a15f7f 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -574,11 +574,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum) /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffer mode. */ - if (musb->double_buffer_not_ok) - musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx); - else - musb_writew(ep->regs, MUSB_RXMAXP, - qh->maxpacket | ((qh->hb_mult - 1) << 11)); + musb_writew(ep->regs, MUSB_RXMAXP, + qh->maxpacket | ((qh->hb_mult - 1) << 11)); ep->rx_reinit = 0; } @@ -804,10 +801,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* protocol/endpoint/interval/NAKlimit */ if (epnum) { musb_writeb(epio, MUSB_TXTYPE, qh->type_reg); - if (musb->double_buffer_not_ok) { - musb_writew(epio, MUSB_TXMAXP, - hw_ep->max_packet_sz_tx); - } else if (can_bulk_split(musb, qh->type)) { + if (can_bulk_split(musb, qh->type)) { qh->hb_mult = hw_ep->max_packet_sz_tx / packet_sz; musb_writew(epio, MUSB_TXMAXP, packet_sz diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index a4beba184798..88466622c89f 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -195,8 +195,6 @@ #define MUSB_HUBADDR_MULTI_TT 0x80 -#ifndef CONFIG_BLACKFIN - /* * Common USB registers */ @@ -416,184 +414,4 @@ static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum) musb->io.busctl_offset(epnum, MUSB_TXHUBPORT)); } -#else /* CONFIG_BLACKFIN */ - -#define USB_BASE USB_FADDR -#define USB_OFFSET(reg) (reg - USB_BASE) - -/* - * Common USB registers - */ -#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */ -#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */ -#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */ -#define MUSB_INTRRX USB_OFFSET(USB_INTRRX) -#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE) -#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE) -#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */ -#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */ -#define MUSB_FRAME USB_OFFSET(USB_FRAME) -#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */ -#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */ - -/* - * Additional Control Registers - */ - -#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */ - -#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */ -#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */ -#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */ -#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */ -#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */ - -/* Offsets to endpoint registers */ -#define MUSB_TXMAXP 0x00 -#define MUSB_TXCSR 0x04 -#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */ -#define MUSB_RXMAXP 0x08 -#define MUSB_RXCSR 0x0C -#define MUSB_RXCOUNT 0x10 -#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */ -#define MUSB_TXTYPE 0x14 -#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */ -#define MUSB_TXINTERVAL 0x18 -#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */ -#define MUSB_RXTYPE 0x1C -#define MUSB_RXINTERVAL 0x20 -#define MUSB_TXCOUNT 0x28 - -/* Offsets to endpoint registers in indexed model (using INDEX register) */ -#define MUSB_INDEXED_OFFSET(_epnum, _offset) \ - (0x40 + (_offset)) - -/* Offsets to endpoint registers in flat models */ -#define MUSB_FLAT_OFFSET(_epnum, _offset) \ - (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset)) - -/* Not implemented - HW has separate Tx/Rx FIFO */ -#define MUSB_TXCSR_MODE 0x0000 - -static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) -{ -} - -static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off) -{ -} - -static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size) -{ -} - -static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) -{ -} - -static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val) -{ -} - -static inline u8 musb_read_txfifosz(void __iomem *mbase) -{ - return 0; -} - -static inline u16 musb_read_txfifoadd(void __iomem *mbase) -{ - return 0; -} - -static inline u8 musb_read_rxfifosz(void __iomem *mbase) -{ - return 0; -} - -static inline u16 musb_read_rxfifoadd(void __iomem *mbase) -{ - return 0; -} - -static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase) -{ - return 0; -} - -static inline u8 musb_read_configdata(void __iomem *mbase) -{ - return 0; -} - -static inline u16 musb_read_hwvers(void __iomem *mbase) -{ - /* - * This register is invisible on Blackfin, actually the MUSB - * RTL version of Blackfin is 1.9, so just hardcode its value. - */ - return MUSB_HWVERS_1900; -} - -static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum, - u8 qh_addr_req) -{ -} - -static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum, - u8 qh_h_addr_reg) -{ -} - -static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum, - u8 qh_h_port_reg) -{ -} - -static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum, - u8 qh_addr_reg) -{ -} - -static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum, - u8 qh_addr_reg) -{ -} - -static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, - u8 qh_h_port_reg) -{ -} - -static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) -{ - return 0; -} - -static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) -{ - return 0; -} - -static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) -{ - return 0; -} - -static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) -{ - return 0; -} - -static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) -{ - return 0; -} - -static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) -{ - return 0; -} - -#endif /* CONFIG_BLACKFIN */ - #endif /* __MUSB_REGS_H__ */ diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 21fb9e6622f3..4389fc3422bd 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -235,11 +235,6 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR); -#ifdef CONFIG_BLACKFIN - /* Clear DMA interrupt flags */ - musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma); -#endif - if (!int_hsdma) { musb_dbg(musb, "spurious DMA irq"); diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index 44f7983df0a1..93665135aff1 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -6,8 +6,6 @@ * Copyright (C) 2005-2007 by Texas Instruments */ -#ifndef CONFIG_BLACKFIN - #define MUSB_HSDMA_BASE 0x200 #define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) #define MUSB_HSDMA_CONTROL 0x4 @@ -34,68 +32,6 @@ musb_writel(mbase, \ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \ len) -#else - -#define MUSB_HSDMA_BASE 0x400 -#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) -#define MUSB_HSDMA_CONTROL 0x04 -#define MUSB_HSDMA_ADDR_LOW 0x08 -#define MUSB_HSDMA_ADDR_HIGH 0x0C -#define MUSB_HSDMA_COUNT_LOW 0x10 -#define MUSB_HSDMA_COUNT_HIGH 0x14 - -#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \ - (MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset) - -static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel) -{ - u32 addr = musb_readw(mbase, - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH)); - - addr = addr << 16; - - addr |= musb_readw(mbase, - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW)); - - return addr; -} - -static inline void musb_write_hsdma_addr(void __iomem *mbase, - u8 bchannel, dma_addr_t dma_addr) -{ - musb_writew(mbase, - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW), - dma_addr); - musb_writew(mbase, - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH), - (dma_addr >> 16)); -} - -static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel) -{ - u32 count = musb_readw(mbase, - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH)); - - count = count << 16; - - count |= musb_readw(mbase, - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW)); - - return count; -} - -static inline void musb_write_hsdma_count(void __iomem *mbase, - u8 bchannel, u32 len) -{ - musb_writew(mbase, - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len); - musb_writew(mbase, - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH), - (len >> 16)); -} - -#endif /* CONFIG_BLACKFIN */ - /* control register (16-bit): */ #define MUSB_HSDMA_ENABLE_SHIFT 0 #define MUSB_HSDMA_TRANSMIT_SHIFT 1 |