Merge tag 'v3.4-rc3' into staging/for_v3.5

* tag 'v3.4-rc3': (3755 commits)
  Linux 3.4-rc3
  x86-32: fix up strncpy_from_user() sign error
  ARM: 7386/1: jump_label: fixup for rename to static_key
  ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE
  ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMU
  ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus
  PCI: Fix regression in pci_restore_state(), v3
  SCSI: Fix error handling when no ULD is attached
  ARM: OMAP: clock: cleanup CPUfreq leftovers, fix build errors
  ARM: dts: remove blank interrupt-parent properties
  ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine files
  do not export kernel's NULL #define to userspace
  ARM: EXYNOS: Remove broken config values for touchscren for NURI board
  ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boards
  ARM: EXYNOS: fix regulator name for NURI board
  ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL
  cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS
  sparc64: Eliminate obsolete __handle_softirq() function
  sparc64: Fix bootup crash on sun4v.
  ARM: msm: Fix section mismatches in proc_comm.c
  ...

60 files changed, 568 insertions, 362 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index e4405e088589..76316a33061b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -2,21 +2,13 @@
 # USB device configuration
 #
 
-menuconfig USB_SUPPORT
-	bool "USB support"
-	depends on HAS_IOMEM
-	default y
-	---help---
-	  This option adds core support for Universal Serial Bus (USB).
-	  You will also need drivers from the following menu to make use of it.
-
 # many non-PCI SOC chips embed OHCI
 config USB_ARCH_HAS_OHCI
 	boolean
 	# ARM:
 	default y if SA1111
 	default y if ARCH_OMAP
-	default y if ARCH_S3C2410
+	default y if ARCH_S3C24XX
 	default y if PXA27x
 	default y if PXA3xx
 	default y if ARCH_EP93XX
@@ -44,7 +36,7 @@ config USB_ARCH_HAS_EHCI
 	default y if PPC_MPC512x
 	default y if ARCH_IXP4XX
 	default y if ARCH_W90X900
-	default y if ARCH_AT91SAM9G45
+	default y if ARCH_AT91
 	default y if ARCH_MXC
 	default y if ARCH_OMAP3
 	default y if ARCH_CNS3XXX
@@ -63,6 +55,14 @@ config USB_ARCH_HAS_XHCI
 	boolean
 	default PCI
 
+menuconfig USB_SUPPORT
+	bool "USB support"
+	depends on HAS_IOMEM
+	default y
+	---help---
+	  This option adds core support for Universal Serial Bus (USB).
+	  You will also need drivers from the following menu to make use of it.
+
 if USB_SUPPORT
 
 config USB_COMMON
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f8e2d6d52e5c..9a56635dc19c 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (status == 0) {
 		status = usb_suspend_device(udev, msg);
 
-		/* Again, ignore errors during system sleep transitions */
-		if (!PMSG_IS_AUTO(msg))
+		/*
+		 * Ignore errors from non-root-hub devices during
+		 * system sleep transitions.  For the most part,
+		 * these devices should go to low power anyway when
+		 * the entire bus is suspended.
+		 */
+		if (udev->parent && !PMSG_IS_AUTO(msg))
 			status = 0;
 	}
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 9d7fc9a39933..140d3e11f212 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
 	if (status == 0) {
 		usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
 		hcd->state = HC_STATE_SUSPENDED;
+
+		/* Did we race with a root-hub wakeup event? */
+		if (rhdev->do_remote_wakeup) {
+			char	buffer[6];
+
+			status = hcd->driver->hub_status_data(hcd, buffer);
+			if (status != 0) {
+				dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+				hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+				status = -EBUSY;
+			}
+		}
 	} else {
 		spin_lock_irq(&hcd_root_hub_lock);
 		if (!HCD_DEAD(hcd)) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 28664eb7f555..a2aa9d652c67 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3163,6 +3163,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (retval)
 		goto fail;
 
+	/*
+	 * Some superspeed devices have finished the link training process
+	 * and attached to a superspeed hub port, but the device descriptor
+	 * got from those devices show they aren't superspeed devices. Warm
+	 * reset the port attached by the devices can fix them.
+	 */
+	if ((udev->speed == USB_SPEED_SUPER) &&
+			(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+		dev_err(&udev->dev, "got a wrong device descriptor, "
+				"warm reset device\n");
+		hub_port_reset(hub, port1, udev,
+				HUB_BH_RESET_TIME, true);
+		retval = -EINVAL;
+		goto fail;
+	}
+
 	if (udev->descriptor.bMaxPacketSize0 == 0xff ||
 			udev->speed == USB_SPEED_SUPER)
 		i = 512;
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index cefa0c8b5b6a..d2b9af59cba9 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -428,18 +428,10 @@ static loff_t default_file_lseek (struct file *file, loff_t offset, int orig)
 	return retval;
 }
 
-static int default_open (struct inode *inode, struct file *file)
-{
-	if (inode->i_private)
-		file->private_data = inode->i_private;
-
-	return 0;
-}
-
 static const struct file_operations default_file_operations = {
 	.read =		default_read_file,
 	.write =	default_write_file,
-	.open =		default_open,
+	.open =		simple_open,
 	.llseek =	default_file_lseek,
 };
 
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b3bdfede45e6..aed3e07942d4 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb)
 				retval = usb_unlink_urb(io->urbs [i]);
 				if (retval != -EINPROGRESS &&
 				    retval != -ENODEV &&
-				    retval != -EBUSY)
+				    retval != -EBUSY &&
+				    retval != -EIDRM)
 					dev_err(&io->dev->dev,
 						"%s, unlink --> %d\n",
 						__func__, retval);
@@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb)
 		}
 		spin_lock(&io->lock);
 	}
-	urb->dev = NULL;
 
 	/* on the last completion, signal usb_sg_wait() */
 	io->bytes += urb->actual_length;
@@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 		case -ENXIO:	/* hc didn't queue this one */
 		case -EAGAIN:
 		case -ENOMEM:
-			io->urbs[i]->dev = NULL;
 			retval = 0;
 			yield();
 			break;
@@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 
 			/* fail any uncompleted urbs */
 		default:
-			io->urbs[i]->dev = NULL;
 			io->urbs[i]->status = retval;
 			dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
 				__func__, retval);
@@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io)
 			if (!io->urbs [i]->dev)
 				continue;
 			retval = usb_unlink_urb(io->urbs [i]);
-			if (retval != -EINPROGRESS && retval != -EBUSY)
+			if (retval != -EINPROGRESS
+					&& retval != -ENODEV
+					&& retval != -EBUSY
+					&& retval != -EIDRM)
 				dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
 					__func__, retval);
 		}
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7239a73c1b8c..cd9b3a2cd8a7 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb);
  * never submitted, or it was unlinked before, or the hardware is already
  * finished with it), even if the completion handler has not yet run.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * Unlinking and Endpoint Queues:
  *
  * [The behaviors and guarantees described below do not apply to virtual
@@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
@@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c14a3972953a..2633f7595116 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -137,7 +137,7 @@ choice
 
 config USB_AT91
 	tristate "Atmel AT91 USB Device Port"
-	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
+	depends on ARCH_AT91
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
 	   full speed USB Device Port with support for five configurable
@@ -150,7 +150,7 @@ config USB_AT91
 config USB_ATMEL_USBA
 	tristate "Atmel USBA"
 	select USB_GADGET_DUALSPEED
-	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+	depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  USBA is the integrated high-speed USB Device controller on
 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
@@ -284,7 +284,7 @@ config USB_IMX
 
 config USB_S3C2410
 	tristate "S3C2410 USB Device Controller"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  Samsung's S3C2410 is an ARM-4 processor with an integrated
 	  full speed USB 1.1 device controller.  It has 4 configurable
@@ -299,7 +299,7 @@ config USB_S3C2410_DEBUG
 
 config USB_S3C_HSUDC
 	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select USB_GADGET_DUALSPEED
 	help
 	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 2204a4c68d85..77779271f487 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -54,7 +54,6 @@
 #include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 /* gadget stack */
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 15a8cdb2ded5..0c935d7c65bd 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -29,17 +29,19 @@
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/gpio.h>
 
 #include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9261_matrix.h>
+#include <mach/at91_matrix.h>
 
 #include "at91_udc.h"
 
@@ -910,9 +912,9 @@ static void pullup(struct at91_udc *udc, int is_on)
 		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
 			u32	usbpucr;
 
-			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+			usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR);
 			usbpucr |= AT91_MATRIX_USBPUCR_PUON;
-			at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+			at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr);
 		}
 	} else {
 		stop_activity(udc);
@@ -928,9 +930,9 @@ static void pullup(struct at91_udc *udc, int is_on)
 		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
 			u32	usbpucr;
 
-			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+			usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR);
 			usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
-			at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+			at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr);
 		}
 		clk_off(udc);
 	}
@@ -1706,7 +1708,27 @@ static void at91udc_shutdown(struct platform_device *dev)
 	spin_unlock_irqrestore(&udc->lock, flags);
 }
 
-static int __init at91udc_probe(struct platform_device *pdev)
+static void __devinit at91udc_of_init(struct at91_udc *udc,
+				     struct device_node *np)
+{
+	struct at91_udc_data *board = &udc->board;
+	u32 val;
+	enum of_gpio_flags flags;
+
+	if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
+		board->vbus_polled = 1;
+
+	board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
+						  &flags);
+	board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+
+	board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0,
+						  &flags);
+
+	board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+}
+
+static int __devinit at91udc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct at91_udc	*udc;
@@ -1741,7 +1763,11 @@ static int __init at91udc_probe(struct platform_device *pdev)
 	/* init software state */
 	udc = &controller;
 	udc->gadget.dev.parent = dev;
-	udc->board = *(struct at91_udc_data *) dev->platform_data;
+	if (pdev->dev.of_node)
+		at91udc_of_init(udc, pdev->dev.of_node);
+	else
+		memcpy(&udc->board, dev->platform_data,
+		       sizeof(struct at91_udc_data));
 	udc->pdev = pdev;
 	udc->enabled = 0;
 	spin_lock_init(&udc->lock);
@@ -1970,6 +1996,15 @@ static int at91udc_resume(struct platform_device *pdev)
 #define	at91udc_resume	NULL
 #endif
 
+#if defined(CONFIG_OF)
+static const struct of_device_id at91_udc_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-udc" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
+#endif
+
 static struct platform_driver at91_udc_driver = {
 	.remove		= __exit_p(at91udc_remove),
 	.shutdown	= at91udc_shutdown,
@@ -1978,6 +2013,7 @@ static struct platform_driver at91_udc_driver = {
 	.driver		= {
 		.name	= (char *) driver_name,
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(at91_udc_dt_ids),
 	},
 };
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 5e10f651ad63..9f98508966d1 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -332,12 +332,12 @@ static int vbus_is_present(struct usba_udc *udc)
 
 static void toggle_bias(int is_on)
 {
-	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+	unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
 
 	if (is_on)
-		at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
+		at91_pmc_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
 	else
-		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
+		at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
 }
 
 #else
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index e1cd56c5e2a8..a6dfd2164166 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -44,7 +44,6 @@
 #include <asm/byteorder.h>
 #include <linux/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_DESC	"USB Host+Gadget Emulator"
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 7cdcb63b21ff..965a6293206a 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -345,7 +345,7 @@ static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req)
 		}
 
 		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
-				skb->len <= 1, req->actual);
+				skb->len <= 1, req->actual, PAGE_SIZE);
 		page = NULL;
 
 		if (req->actual < req->length) { /* Last fragment */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index b30e21fdbb1b..5f94e79cd6b9 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -43,7 +43,6 @@
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/dma.h>
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index e1dfd32dc805..e151d6b87dee 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -43,7 +43,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 8793f32bab11..e58b16442971 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1574,7 +1574,6 @@ static void destroy_ep_files (struct dev_data *dev)
 	DBG (dev, "%s %d\n", __func__, dev->state);
 
 	/* dev->state must prevent interference */
-restart:
 	spin_lock_irq (&dev->lock);
 	while (!list_empty(&dev->epfiles)) {
 		struct ep_data	*ep;
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index edd52d963f14..f9cedd52cf20 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -32,7 +32,6 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include "langwell_udc.h"
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 19bbe80c2f8c..a73cf406e2a4 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -34,7 +34,6 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/platform_data/mv_usb.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include "mv_udc.h"
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index 01ae56f47174..43ac7482fa91 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -42,7 +42,6 @@
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include "net2272.h"
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index a5ccabc37f30..ac335af154ba 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -59,7 +59,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index b44830df593e..3b4b6dd0f95a 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -40,7 +40,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index d83134b0f78a..4e4dc1f5f388 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -34,7 +34,6 @@
 #include <asm/byteorder.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 1b33634f2736..41ed69c96d8c 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -41,7 +41,6 @@
 #include <asm/byteorder.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
-#include <asm/system.h>
 #include <asm/mach-types.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index d3cdffea9c8a..73a934a170d1 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -34,7 +34,6 @@
 
 #include <asm/io.h>
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index ab9c65e2c1d5..195524cde6c3 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -37,7 +37,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 #include <mach/irqs.h>
 
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index a5a3ef1f0096..cf14c95a6700 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -13,6 +13,8 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 /* interface and function clocks */
 static struct clk *iclk, *fclk;
@@ -115,6 +117,8 @@ static const struct hc_driver ehci_atmel_hc_driver = {
 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
+static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
@@ -137,6 +141,13 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
 		goto fail_create_hcd;
 	}
 
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &at91_ehci_dma_mask;
+
 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
 		retval = -ENOMEM;
@@ -225,9 +236,21 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_ehci_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g45-ehci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
+#endif
+
 static struct platform_driver ehci_atmel_driver = {
 	.probe		= ehci_atmel_drv_probe,
 	.remove		= __devexit_p(ehci_atmel_drv_remove),
 	.shutdown	= usb_hcd_platform_shutdown,
-	.driver.name	= "atmel-ehci",
+	.driver		= {
+		.name	= "atmel-ehci",
+		.of_match_table	= of_match_ptr(atmel_ehci_dt_ids),
+	},
 };
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index fd9109d7eb0e..680e1a31fb87 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -352,7 +352,6 @@ static int debug_async_open(struct inode *, struct file *);
 static int debug_periodic_open(struct inode *, struct file *);
 static int debug_registers_open(struct inode *, struct file *);
 static int debug_async_open(struct inode *, struct file *);
-static int debug_lpm_open(struct inode *, struct file *);
 static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
 				   size_t count, loff_t *ppos);
 static ssize_t debug_lpm_write(struct file *file, const char __user *buffer,
@@ -385,7 +384,7 @@ static const struct file_operations debug_registers_fops = {
 };
 static const struct file_operations debug_lpm_fops = {
 	.owner		= THIS_MODULE,
-	.open		= debug_lpm_open,
+	.open		= simple_open,
 	.read		= debug_lpm_read,
 	.write		= debug_lpm_write,
 	.release	= debug_lpm_close,
@@ -970,12 +969,6 @@ static int debug_registers_open(struct inode *inode, struct file *file)
 	return file->private_data ? 0 : -ENOMEM;
 }
 
-static int debug_lpm_open(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
 static int debug_lpm_close(struct inode *inode, struct file *file)
 {
 	return 0;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index aede6374e4b6..806cc95317aa 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -45,7 +45,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #if defined(CONFIG_PPC_PS3)
@@ -348,6 +347,8 @@ static int ehci_reset (struct ehci_hcd *ehci)
 	if (ehci->debug)
 		dbgp_external_startup();
 
+	ehci->port_c_suspend = ehci->suspended_ports =
+			ehci->resuming_ports = 0;
 	return retval;
 }
 
@@ -940,6 +941,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 			 * like usb_port_resume() does.
 			 */
 			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+			set_bit(i, &ehci->resuming_ports);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
 			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
 		}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 256fbd42e48c..38fe07623152 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -223,15 +223,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	 * remote wakeup, we must fail the suspend.
 	 */
 	if (hcd->self.root_hub->do_remote_wakeup) {
-		port = HCS_N_PORTS(ehci->hcs_params);
-		while (port--) {
-			if (ehci->reset_done[port] != 0) {
-				spin_unlock_irq(&ehci->lock);
-				ehci_dbg(ehci, "suspend failed because "
-						"port %d is resuming\n",
-						port + 1);
-				return -EBUSY;
-			}
+		if (ehci->resuming_ports) {
+			spin_unlock_irq(&ehci->lock);
+			ehci_dbg(ehci, "suspend failed because a port is resuming\n");
+			return -EBUSY;
 		}
 	}
 
@@ -554,16 +549,12 @@ static int
 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
 	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
-	u32		temp, status = 0;
+	u32		temp, status;
 	u32		mask;
 	int		ports, i, retval = 1;
 	unsigned long	flags;
 	u32		ppcd = 0;
 
-	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
-	if (ehci->rh_state != EHCI_RH_RUNNING)
-		return 0;
-
 	/* init status to no-changes */
 	buf [0] = 0;
 	ports = HCS_N_PORTS (ehci->hcs_params);
@@ -572,6 +563,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		retval++;
 	}
 
+	/* Inform the core about resumes-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	status = ehci->resuming_ports;
+
 	/* Some boards (mostly VIA?) report bogus overcurrent indications,
 	 * causing massive log spam unless we completely ignore them.  It
 	 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
@@ -846,6 +842,7 @@ static int ehci_hub_control (
 				ehci_writel(ehci,
 					temp & ~(PORT_RWC_BITS | PORT_RESUME),
 					status_reg);
+				clear_bit(wIndex, &ehci->resuming_ports);
 				retval = handshake(ehci, status_reg,
 					   PORT_RESUME, 0, 2000 /* 2msec */);
 				if (retval != 0) {
@@ -864,6 +861,7 @@ static int ehci_hub_control (
 					ehci->reset_done[wIndex])) {
 			status |= USB_PORT_STAT_C_RESET << 16;
 			ehci->reset_done [wIndex] = 0;
+			clear_bit(wIndex, &ehci->resuming_ports);
 
 			/* force reset to complete */
 			ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
@@ -884,8 +882,10 @@ static int ehci_hub_control (
 					ehci_readl(ehci, status_reg));
 		}
 
-		if (!(temp & (PORT_RESUME|PORT_RESET)))
+		if (!(temp & (PORT_RESUME|PORT_RESET))) {
 			ehci->reset_done[wIndex] = 0;
+			clear_bit(wIndex, &ehci->resuming_ports);
+		}
 
 		/* transfer dedicated ports to the companion hc */
 		if ((temp & PORT_CONNECT) &&
@@ -920,6 +920,7 @@ static int ehci_hub_control (
 			status |= USB_PORT_STAT_SUSPEND;
 		} else if (test_bit(wIndex, &ehci->suspended_ports)) {
 			clear_bit(wIndex, &ehci->suspended_ports);
+			clear_bit(wIndex, &ehci->resuming_ports);
 			ehci->reset_done[wIndex] = 0;
 			if (temp & PORT_PE)
 				set_bit(wIndex, &ehci->port_c_suspend);
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 3de48a2d7955..73544bd440bd 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -224,6 +224,7 @@ static int tegra_ehci_hub_control(
 		temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
 		/* start resume signalling */
 		ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+		set_bit(wIndex-1, &ehci->resuming_ports);
 
 		spin_unlock_irqrestore(&ehci->lock, flags);
 		msleep(20);
@@ -236,6 +237,7 @@ static int tegra_ehci_hub_control(
 			pr_err("%s: timeout waiting for SUSPEND\n", __func__);
 
 		ehci->reset_done[wIndex-1] = 0;
+		clear_bit(wIndex-1, &ehci->resuming_ports);
 
 		tegra->port_resuming = 1;
 		goto done;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 8f9acbc96fde..2694ed6558d2 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -117,6 +117,8 @@ struct ehci_hcd {			/* one per controller */
 			the change-suspend feature turned on */
 	unsigned long		suspended_ports;	/* which ports are
 			suspended */
+	unsigned long		resuming_ports;		/* which ports have
+			started to resume */
 
 	/* per-HC memory pools (could be per-bus, but ...) */
 	struct dma_pool		*qh_pool;	/* qh per active urb */
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 924880087a74..9e65e3091c8a 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -70,7 +70,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include "isp116x.h"
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 9e63cdf1ab75..2ed112d3e159 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -84,7 +84,6 @@
 #include <linux/prefetch.h>
 
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 77afabc77f9b..09f597ad6e00 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -14,6 +14,8 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/gpio.h>
@@ -25,6 +27,10 @@
 #error "CONFIG_ARCH_AT91 must be defined."
 #endif
 
+#define valid_port(index)	((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
+#define at91_for_each_port(index)	\
+		for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
+
 /* interface and function clocks; sometimes also an AHB clock */
 static struct clk *iclk, *fclk, *hclk;
 static int clocked;
@@ -238,26 +244,26 @@ ohci_at91_start (struct usb_hcd *hcd)
 
 static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
 {
-	if (port < 0 || port >= 2)
+	if (!valid_port(port))
 		return;
 
 	if (!gpio_is_valid(pdata->vbus_pin[port]))
 		return;
 
 	gpio_set_value(pdata->vbus_pin[port],
-		       !pdata->vbus_pin_active_low[port] ^ enable);
+		       pdata->vbus_pin_active_low[port] ^ enable);
 }
 
 static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
 {
-	if (port < 0 || port >= 2)
+	if (!valid_port(port))
 		return -EINVAL;
 
 	if (!gpio_is_valid(pdata->vbus_pin[port]))
 		return -EINVAL;
 
 	return gpio_get_value(pdata->vbus_pin[port]) ^
-		!pdata->vbus_pin_active_low[port];
+		pdata->vbus_pin_active_low[port];
 }
 
 /*
@@ -269,9 +275,9 @@ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
 	int length = ohci_hub_status_data(hcd, buf);
 	int port;
 
-	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+	at91_for_each_port(port) {
 		if (pdata->overcurrent_changed[port]) {
-			if (! length)
+			if (!length)
 				length = 1;
 			buf[0] |= 1 << (port + 1);
 		}
@@ -295,11 +301,17 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		"ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
 		hcd, typeReq, wValue, wIndex, buf, wLength);
 
+	wIndex--;
+
 	switch (typeReq) {
 	case SetPortFeature:
 		if (wValue == USB_PORT_FEAT_POWER) {
 			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
-			ohci_at91_usb_set_power(pdata, wIndex - 1, 1);
+			if (valid_port(wIndex)) {
+				ohci_at91_usb_set_power(pdata, wIndex, 1);
+				ret = 0;
+			}
+
 			goto out;
 		}
 		break;
@@ -310,9 +322,9 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			dev_dbg(hcd->self.controller,
 				"ClearPortFeature: C_OVER_CURRENT\n");
 
-			if (wIndex == 1 || wIndex == 2) {
-				pdata->overcurrent_changed[wIndex-1] = 0;
-				pdata->overcurrent_status[wIndex-1] = 0;
+			if (valid_port(wIndex)) {
+				pdata->overcurrent_changed[wIndex] = 0;
+				pdata->overcurrent_status[wIndex] = 0;
 			}
 
 			goto out;
@@ -321,9 +333,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			dev_dbg(hcd->self.controller,
 				"ClearPortFeature: OVER_CURRENT\n");
 
-			if (wIndex == 1 || wIndex == 2) {
-				pdata->overcurrent_status[wIndex-1] = 0;
-			}
+			if (valid_port(wIndex))
+				pdata->overcurrent_status[wIndex] = 0;
 
 			goto out;
 
@@ -331,15 +342,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			dev_dbg(hcd->self.controller,
 				"ClearPortFeature: POWER\n");
 
-			if (wIndex == 1 || wIndex == 2) {
-				ohci_at91_usb_set_power(pdata, wIndex - 1, 0);
+			if (valid_port(wIndex)) {
+				ohci_at91_usb_set_power(pdata, wIndex, 0);
 				return 0;
 			}
 		}
 		break;
 	}
 
-	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
 	if (ret)
 		goto out;
 
@@ -375,18 +386,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
 
-		if (wIndex == 1 || wIndex == 2) {
-			if (! ohci_at91_usb_get_power(pdata, wIndex-1)) {
+		if (valid_port(wIndex)) {
+			if (!ohci_at91_usb_get_power(pdata, wIndex))
 				*data &= ~cpu_to_le32(RH_PS_PPS);
-			}
 
-			if (pdata->overcurrent_changed[wIndex-1]) {
+			if (pdata->overcurrent_changed[wIndex])
 				*data |= cpu_to_le32(RH_PS_OCIC);
-			}
 
-			if (pdata->overcurrent_status[wIndex-1]) {
+			if (pdata->overcurrent_status[wIndex])
 				*data |= cpu_to_le32(RH_PS_POCI);
-			}
 		}
 	}
 
@@ -448,13 +456,14 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
 
 	/* From the GPIO notifying the over-current situation, find
 	 * out the corresponding port */
-	gpio = irq_to_gpio(irq);
-	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
-		if (pdata->overcurrent_pin[port] == gpio)
+	at91_for_each_port(port) {
+		if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
+			gpio = pdata->overcurrent_pin[port];
 			break;
+		}
 	}
 
-	if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
+	if (port == AT91_MAX_USBH_PORTS) {
 		dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
 		return IRQ_HANDLED;
 	}
@@ -464,7 +473,7 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
 	/* When notified of an over-current situation, disable power
 	   on the corresponding port, and mark this port in
 	   over-current. */
-	if (! val) {
+	if (!val) {
 		ohci_at91_usb_set_power(pdata, port, 0);
 		pdata->overcurrent_status[port]  = 1;
 		pdata->overcurrent_changed[port] = 1;
@@ -476,34 +485,133 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id at91_ohci_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-ohci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
+
+static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int i, gpio;
+	enum of_gpio_flags flags;
+	struct at91_usbh_data	*pdata;
+	u32 ports;
+
+	if (!np)
+		return 0;
+
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &at91_ohci_dma_mask;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	if (!of_property_read_u32(np, "num-ports", &ports))
+		pdata->ports = ports;
+
+	at91_for_each_port(i) {
+		gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags);
+		pdata->vbus_pin[i] = gpio;
+		if (!gpio_is_valid(gpio))
+			continue;
+		pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
+	}
+
+	at91_for_each_port(i)
+		pdata->overcurrent_pin[i] =
+			of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
+
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+#else
+static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 {
-	struct at91_usbh_data	*pdata = pdev->dev.platform_data;
+	struct at91_usbh_data	*pdata;
 	int			i;
+	int			gpio;
+	int			ret;
+
+	ret = ohci_at91_of_init(pdev);
+	if (ret)
+		return ret;
+
+	pdata = pdev->dev.platform_data;
 
 	if (pdata) {
-		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
+		at91_for_each_port(i) {
 			if (!gpio_is_valid(pdata->vbus_pin[i]))
 				continue;
-			gpio_request(pdata->vbus_pin[i], "ohci_vbus");
+			gpio = pdata->vbus_pin[i];
+
+			ret = gpio_request(gpio, "ohci_vbus");
+			if (ret) {
+				dev_err(&pdev->dev,
+					"can't request vbus gpio %d\n", gpio);
+				continue;
+			}
+			ret = gpio_direction_output(gpio,
+						!pdata->vbus_pin_active_low[i]);
+			if (ret) {
+				dev_err(&pdev->dev,
+					"can't put vbus gpio %d as output %d\n",
+					gpio, !pdata->vbus_pin_active_low[i]);
+				gpio_free(gpio);
+				continue;
+			}
+
 			ohci_at91_usb_set_power(pdata, i, 1);
 		}
 
-		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
-			int ret;
-
+		at91_for_each_port(i) {
 			if (!gpio_is_valid(pdata->overcurrent_pin[i]))
 				continue;
-			gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
+			gpio = pdata->overcurrent_pin[i];
+
+			ret = gpio_request(gpio, "ohci_overcurrent");
+			if (ret) {
+				dev_err(&pdev->dev,
+					"can't request overcurrent gpio %d\n",
+					gpio);
+				continue;
+			}
+
+			ret = gpio_direction_input(gpio);
+			if (ret) {
+				dev_err(&pdev->dev,
+					"can't configure overcurrent gpio %d as input\n",
+					gpio);
+				gpio_free(gpio);
+				continue;
+			}
 
-			ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]),
+			ret = request_irq(gpio_to_irq(gpio),
 					  ohci_hcd_at91_overcurrent_irq,
 					  IRQF_SHARED, "ohci_overcurrent", pdev);
 			if (ret) {
-				gpio_free(pdata->overcurrent_pin[i]);
-				dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+				gpio_free(gpio);
+				dev_err(&pdev->dev,
+					"can't get gpio IRQ for overcurrent\n");
 			}
 		}
 	}
@@ -518,14 +626,14 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 	int			i;
 
 	if (pdata) {
-		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
+		at91_for_each_port(i) {
 			if (!gpio_is_valid(pdata->vbus_pin[i]))
 				continue;
 			ohci_at91_usb_set_power(pdata, i, 0);
 			gpio_free(pdata->vbus_pin[i]);
 		}
 
-		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+		at91_for_each_port(i) {
 			if (!gpio_is_valid(pdata->overcurrent_pin[i]))
 				continue;
 			free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
@@ -595,5 +703,6 @@ static struct platform_driver ohci_hcd_at91_driver = {
 	.driver		= {
 		.name	= "at91_ohci",
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(at91_ohci_dt_ids),
 	},
 };
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index cd5e382db89c..235171f29460 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -42,7 +42,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
@@ -1000,7 +999,7 @@ MODULE_LICENSE ("GPL");
 #define SA1111_DRIVER		ohci_hcd_sa1111_driver
 #endif
 
-#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
 #include "ohci-s3c2410.c"
 #define PLATFORM_DRIVER		ohci_hcd_s3c2410_driver
 #endif
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4bde4f9821ba..e1004fb37bd9 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -16,29 +16,115 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/assabet.h>
-#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #ifndef CONFIG_SA1111
 #error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
 #endif
 
-extern int usb_disabled(void);
+#define USB_STATUS	0x0118
+#define USB_RESET	0x011c
+#define USB_IRQTEST	0x0120
+
+#define USB_RESET_FORCEIFRESET	(1 << 0)
+#define USB_RESET_FORCEHCRESET	(1 << 1)
+#define USB_RESET_CLKGENRESET	(1 << 2)
+#define USB_RESET_SIMSCALEDOWN	(1 << 3)
+#define USB_RESET_USBINTTEST	(1 << 4)
+#define USB_RESET_SLEEPSTBYEN	(1 << 5)
+#define USB_RESET_PWRSENSELOW	(1 << 6)
+#define USB_RESET_PWRCTRLLOW	(1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
+#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
+#define USB_STATUS_NIRQHCIM       (1 <<  9)
+#define USB_STATUS_NHCIMFCLR      (1 << 10)
+#define USB_STATUS_USBPWRSENSE    (1 << 11)
 
-/*-------------------------------------------------------------------------*/
+#if 0
+static void dump_hci_status(struct usb_hcd *hcd, const char *label)
+{
+	unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+
+	dbg("%s USB_STATUS = { %s%s%s%s%s}", label,
+	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
+	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
+	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
+	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
+	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
+}
+#endif
 
-static void sa1111_start_hc(struct sa1111_dev *dev)
+static int ohci_sa1111_reset(struct usb_hcd *hcd)
 {
-	unsigned int usb_rst = 0;
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
 
-	printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
-	       __FILE__);
+static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
 
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4()) {
-		badge4_set_5V(BADGE4_5V_USB, 1);
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		ohci_err(ohci, "can't start\n");
+		ohci_stop(hcd);
 	}
+	return ret;
+}
+
+static const struct hc_driver ohci_sa1111_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"SA-1111 OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_sa1111_reset,
+	.start =		ohci_sa1111_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
 #endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+static int sa1111_start_hc(struct sa1111_dev *dev)
+{
+	unsigned int usb_rst = 0;
+	int ret;
+
+	dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
 
 	if (machine_is_xp860() ||
 	    machine_has_neponset() ||
@@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
 	 * host controller in reset.
 	 */
 	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
-		      dev->mapbase + SA1111_USB_RESET);
+		      dev->mapbase + USB_RESET);
 
 	/*
 	 * Now, carefully enable the USB clock, and take
 	 * the USB host controller out of reset.
 	 */
-	sa1111_enable_device(dev);
-	udelay(11);
-	sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET);
+	ret = sa1111_enable_device(dev);
+	if (ret == 0) {
+		udelay(11);
+		sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+	}
+
+	return ret;
 }
 
 static void sa1111_stop_hc(struct sa1111_dev *dev)
 {
 	unsigned int usb_rst;
-	printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n",
-	       __FILE__);
+
+	dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
 
 	/*
 	 * Put the USB host controller into reset.
 	 */
-	usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET);
+	usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
 	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
-		      dev->mapbase + SA1111_USB_RESET);
+		      dev->mapbase + USB_RESET);
 
 	/*
 	 * Stop the USB clock.
 	 */
 	sa1111_disable_device(dev);
-
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4()) {
-		/* Disable power to the USB bus */
-		badge4_set_5V(BADGE4_5V_USB, 0);
-	}
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-#if 0
-static void dump_hci_status(struct usb_hcd *hcd, const char *label)
-{
-	unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS);
-
-	dbg ("%s USB_STATUS = { %s%s%s%s%s}", label,
-	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
-	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
-	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
-	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
-	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
 }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
 
 /**
- * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs
- * Context: !in_interrupt()
+ * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
  *
  * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
+ * then invokes the start() method for the HCD associated with it.
  */
-int usb_hcd_sa1111_probe (const struct hc_driver *driver,
-			  struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd;
-	int retval;
+	int ret;
 
-	hcd = usb_create_hcd (driver, &dev->dev, "sa1111");
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
 	if (!hcd)
 		return -ENOMEM;
+
 	hcd->rsrc_start = dev->res.start;
 	hcd->rsrc_len = resource_size(&dev->res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		dbg("request_mem_region failed");
-		retval = -EBUSY;
+		ret = -EBUSY;
 		goto err1;
 	}
+
 	hcd->regs = dev->mapbase;
 
-	sa1111_start_hc(dev);
-	ohci_hcd_init(hcd_to_ohci(hcd));
+	ret = sa1111_start_hc(dev);
+	if (ret)
+		goto err2;
 
-	retval = usb_add_hcd(hcd, dev->irq[1], 0);
-	if (retval == 0)
-		return retval;
+	ret = usb_add_hcd(hcd, dev->irq[1], 0);
+	if (ret == 0)
+		return ret;
 
 	sa1111_stop_hc(dev);
+ err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
 	usb_put_hcd(hcd);
-	return retval;
+	return ret;
 }
 
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
 /**
- * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
+ * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
  * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_sa1111_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
  *
+ * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
+ * the HCD's stop() method.
  */
-void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
 {
+	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
+
 	usb_remove_hcd(hcd);
 	sa1111_stop_hc(dev);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
 
-static int __devinit
-ohci_sa1111_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
-		ohci_stop (hcd);
-		return ret;
-	}
 	return 0;
 }
 
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_sa1111_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"SA-1111 OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_sa1111_start,
-	.stop =			ohci_stop,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev)
-{
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev);
-	return ret;
-}
-
-static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev)
+static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 
-	usb_hcd_sa1111_remove(hcd, dev);
-	return 0;
+	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		hcd->driver->shutdown(hcd);
+		sa1111_stop_hc(dev);
+	}
 }
 
 static struct sa1111_driver ohci_hcd_sa1111_driver = {
 	.drv = {
 		.name	= "sa1111-ohci",
+		.owner	= THIS_MODULE,
 	},
 	.devid		= SA1111_DEVID_USB,
-	.probe		= ohci_hcd_sa1111_drv_probe,
-	.remove		= ohci_hcd_sa1111_drv_remove,
+	.probe		= ohci_hcd_sa1111_probe,
+	.remove		= ohci_hcd_sa1111_remove,
+	.shutdown	= ohci_hcd_sa1111_shutdown,
 };
-
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 015c7c62ed49..3b38030b02a8 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -40,7 +40,6 @@
 #include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include <linux/irq.h>
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 7732d69e49e0..32dada8c8b4f 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -825,9 +825,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 		}
 	}
 
-	/* Disable any BIOS SMIs */
-	writel(XHCI_LEGACY_DISABLE_SMI,
-			base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+	val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+	/* Mask off (turn off) any enabled SMIs */
+	val &= XHCI_LEGACY_DISABLE_SMI;
+	/* Mask all SMI events bits, RW1C */
+	val |= XHCI_LEGACY_SMI_EVENTS;
+	/* Disable any BIOS SMIs and clear all SMI events*/
+	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
@@ -893,4 +897,5 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 		quirk_usb_handoff_xhci(pdev);
 	pci_disable_device(pdev);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 2a2cce2d2fa7..91ce1c02e617 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -51,7 +51,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 16dd6a6abf00..dbbd1ba25224 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -55,7 +55,6 @@
 #include <linux/mutex.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 	/* FIXME ohci.h is ONLY for internal use by the OHCI driver.
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index e37dea87bb56..e4db350602b8 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -45,7 +45,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #include "uhci-hcd.h"
 
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 045cde4cbc3d..768d54295a20 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -196,11 +196,12 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	status = get_hub_status_data(uhci, buf);
 
 	switch (uhci->rh_state) {
-	    case UHCI_RH_SUSPENDING:
 	    case UHCI_RH_SUSPENDED:
 		/* if port change, ask to be resumed */
-		if (status || uhci->resuming_ports)
+		if (status || uhci->resuming_ports) {
+			status = 1;
 			usb_hcd_resume_root_hub(hcd);
+		}
 		break;
 
 	    case UHCI_RH_AUTO_STOPPED:
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index e9b0f043455d..4b436f5a4171 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -119,7 +119,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci)
 	xhci_dbg(xhci, "  Event Interrupts %s\n",
 			(temp & CMD_EIE) ? "enabled " : "disabled");
 	xhci_dbg(xhci, "  Host System Error Interrupts %s\n",
-			(temp & CMD_EIE) ? "enabled " : "disabled");
+			(temp & CMD_HSEIE) ? "enabled " : "disabled");
 	xhci_dbg(xhci, "  HC has %sfinished light reset\n",
 			(temp & CMD_LRESET) ? "not " : "");
 }
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index c7f33123d4c0..377f4242dabb 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -62,8 +62,9 @@
 /* USB Legacy Support Control and Status Register  - section 7.1.2 */
 /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
 #define XHCI_LEGACY_CONTROL_OFFSET	(0x04)
-/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define	XHCI_LEGACY_DISABLE_SMI		((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define	XHCI_LEGACY_DISABLE_SMI		((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS		(0x7 << 29)
 
 /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
 #define XHCI_L1C               (1 << 16)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index cae4c6f2845a..68eaa908ac8e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1796,11 +1796,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int i;
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
-	if (xhci->ir_set) {
-		xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
-		xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
-		xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
-	}
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
 	if (xhci->erst.entries)
 		dma_free_coherent(&pdev->dev, size,
@@ -1812,7 +1807,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->event_ring = NULL;
 	xhci_dbg(xhci, "Freed event ring\n");
 
-	xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -1841,7 +1835,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->medium_streams_pool = NULL;
 	xhci_dbg(xhci, "Freed medium stream array pool\n");
 
-	xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
 	if (xhci->dcbaa)
 		dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
 				xhci->dcbaa, xhci->dcbaa->dma);
@@ -2459,6 +2452,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 fail:
 	xhci_warn(xhci, "Couldn't initialize memory\n");
+	xhci_halt(xhci);
+	xhci_reset(xhci);
 	xhci_mem_cleanup(xhci);
 	return -ENOMEM;
 }
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ef98b38626fb..7a856a767e77 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -95,6 +95,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_VIA)
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
 }
 
 /* called during probe() after chip reset completes */
@@ -326,7 +328,7 @@ int __init xhci_register_pci(void)
 	return pci_register_driver(&xhci_pci_driver);
 }
 
-void __exit xhci_unregister_pci(void)
+void xhci_unregister_pci(void)
 {
 	pci_unregister_driver(&xhci_pci_driver);
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6bd9d53062eb..3d9422f16a20 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2417,7 +2417,7 @@ hw_died:
 		u32 irq_pending;
 		/* Acknowledge the PCI interrupt */
 		irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-		irq_pending |= 0x3;
+		irq_pending |= IMAN_IP;
 		xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
 	}
 
@@ -2734,7 +2734,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 				urb->dev->speed == USB_SPEED_FULL)
 			urb->interval /= 8;
 	}
-	return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+	return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
 }
 
 /*
@@ -3514,7 +3514,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
 	}
 	ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
 
-	return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+	return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
 }
 
 /****		Command Ring Operations		****/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index e1963d4a430f..36641a7f2371 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,9 @@ int xhci_halt(struct xhci_hcd *xhci)
 			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
 	if (!ret)
 		xhci->xhc_state |= XHCI_STATE_HALTED;
+	else
+		xhci_warn(xhci, "Host not halted after %u microseconds.\n",
+				XHCI_MAX_HALT_USEC);
 	return ret;
 }
 
@@ -664,11 +667,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci)
 	xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
 	xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
 	xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
-	xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-	xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
 	xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
 	xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
 	xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
 }
 
 static void xhci_restore_registers(struct xhci_hcd *xhci)
@@ -677,10 +680,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
 	xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
 	xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
 	xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
-	xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
-	xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
 	xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
 	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+	xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+	xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+	xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
 }
 
 static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 91074fdab3eb..3d69c4b2b542 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -205,6 +205,10 @@ struct xhci_op_regs {
 #define CMD_PM_INDEX	(1 << 11)
 /* bits 12:31 are reserved (and should be preserved on writes). */
 
+/* IMAN - Interrupt Management Register */
+#define IMAN_IP		(1 << 1)
+#define IMAN_IE		(1 << 0)
+
 /* USBSTS - USB status - status bitmasks */
 /* HC not running - set to 1 when run/stop bit is cleared. */
 #define STS_HALT	XHCI_STS_HALT
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 97cb45916c43..d05c7fbbb703 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -115,12 +115,12 @@ static bool ux500_configure_channel(struct dma_channel *channel,
 	slave_conf.dst_addr = usb_fifo_addr;
 	slave_conf.dst_addr_width = addr_width;
 	slave_conf.dst_maxburst = 16;
+	slave_conf.device_fc = false;
 
 	dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
 					     (unsigned long) &slave_conf);
 
-	dma_desc = dma_chan->device->
-			device_prep_slave_sg(dma_chan, &sg, 1, direction,
+	dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction,
 					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!dma_desc)
 		return false;
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 3648c82a17fe..6ec7f838d7fa 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -786,9 +786,8 @@ static void xfer_work(struct work_struct *work)
 	sg_dma_address(&sg) = pkt->dma + pkt->actual;
 	sg_dma_len(&sg) = pkt->trans;
 
-	desc = chan->device->device_prep_slave_sg(chan, &sg, 1, dir,
-						  DMA_PREP_INTERRUPT |
-						  DMA_CTRL_ACK);
+	desc = dmaengine_prep_slave_sg(chan, &sg, 1, dir,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
 		return;
 
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 7f547dc3a590..ed8adb052ca7 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -60,8 +60,6 @@ static int usb_serial_device_probe(struct device *dev)
 		retval = -ENODEV;
 		goto exit;
 	}
-	if (port->dev_state != PORT_REGISTERING)
-		goto exit;
 
 	driver = port->serial->type;
 	if (driver->port_probe) {
@@ -98,9 +96,6 @@ static int usb_serial_device_remove(struct device *dev)
 	if (!port)
 		return -ENODEV;
 
-	if (port->dev_state != PORT_UNREGISTERING)
-		return retval;
-
 	device_remove_file(&port->dev, &dev_attr_port_number);
 
 	driver = port->serial->type;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7c229d304684..02e7f2d32d52 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -75,7 +75,8 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	struct async_icount	icount;
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
-	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
+	char prev_status;        /* Used for TIOCMIWAIT */
+	bool dev_gone;        /* Used to abort TIOCMIWAIT */
 	char transmit_empty;	/* If transmitter is empty or not */
 	struct usb_serial_port *port;
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
@@ -1681,6 +1682,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	init_waitqueue_head(&priv->delta_msr_wait);
 
 	priv->flags = ASYNC_LOW_LATENCY;
+	priv->dev_gone = false;
 
 	if (quirk && quirk->port_probe)
 		quirk->port_probe(priv);
@@ -1724,7 +1726,8 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 
 /*
  * Module parameter to control latency timer for NDI FTDI-based USB devices.
- * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ * If this value is not set in /etc/modprobe.d/ its value will be set
+ * to 1ms.
  */
 static int ndi_latency_timer = 1;
 
@@ -1838,6 +1841,9 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
 	dbg("%s", __func__);
 
+	priv->dev_gone = true;
+	wake_up_interruptible_all(&priv->delta_msr_wait);
+
 	remove_sysfs_attrs(port);
 
 	kref_put(&priv->kref, ftdi_sio_priv_release);
@@ -1981,17 +1987,19 @@ static int ftdi_process_packet(struct tty_struct *tty,
 	   N.B. packet may be processed more than once, but differences
 	   are only processed once.  */
 	status = packet[0] & FTDI_STATUS_B0_MASK;
-	if (status & FTDI_RS0_CTS)
-		priv->icount.cts++;
-	if (status & FTDI_RS0_DSR)
-		priv->icount.dsr++;
-	if (status & FTDI_RS0_RI)
-		priv->icount.rng++;
-	if (status & FTDI_RS0_RLSD)
-		priv->icount.dcd++;
 	if (status != priv->prev_status) {
-		priv->diff_status |= status ^ priv->prev_status;
-		wake_up_interruptible(&priv->delta_msr_wait);
+		char diff_status = status ^ priv->prev_status;
+
+		if (diff_status & FTDI_RS0_CTS)
+			priv->icount.cts++;
+		if (diff_status & FTDI_RS0_DSR)
+			priv->icount.dsr++;
+		if (diff_status & FTDI_RS0_RI)
+			priv->icount.rng++;
+		if (diff_status & FTDI_RS0_RLSD)
+			priv->icount.dcd++;
+
+		wake_up_interruptible_all(&priv->delta_msr_wait);
 		priv->prev_status = status;
 	}
 
@@ -2394,15 +2402,12 @@ static int ftdi_ioctl(struct tty_struct *tty,
 	 */
 	case TIOCMIWAIT:
 		cprev = priv->icount;
-		while (1) {
+		while (!priv->dev_gone) {
 			interruptible_sleep_on(&priv->delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
 			cnow = priv->icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO; /* no change => error */
 			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
 			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
@@ -2411,7 +2416,7 @@ static int ftdi_ioctl(struct tty_struct *tty,
 			}
 			cprev = cnow;
 		}
-		/* not reached */
+		return -EIO;
 		break;
 	case TIOCSERGETLSR:
 		return get_lsr_info(port, (struct serial_struct __user *)arg);
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 6e1622f2a297..08d16e8c002d 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -27,8 +27,8 @@
 
 /* Product information. */
 #define FOCUS_VENDOR_ID			0x0C2E
-#define FOCUS_PRODUCT_ID		0x0720
-#define FOCUS_PRODUCT_ID_UNI		0x0710
+#define FOCUS_PRODUCT_ID_BI		0x0720
+#define FOCUS_PRODUCT_ID_UNI		0x0700
 
 #define METROUSB_SET_REQUEST_TYPE	0x40
 #define METROUSB_SET_MODEM_CTRL_REQUEST	10
@@ -47,7 +47,7 @@ struct metrousb_private {
 
 /* Device table list. */
 static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) },
+	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) },
 	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
 	{ }, /* Terminating entry. */
 };
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6815701cf656..f4465ccddc35 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -708,6 +708,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
@@ -903,8 +904,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ff4a174fa5de..a1a9062954c4 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -420,7 +420,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	control = priv->line_control;
 	if ((cflag & CBAUD) == B0)
 		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-	else
+	else if ((old_termios->c_cflag & CBAUD) == B0)
 		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 	if (control != priv->line_control) {
 		control = priv->line_control;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index f14465a83dd1..fdd5aa2c8d82 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x6856) },	/* Sierra Wireless AirCard 881 U */
 	{ USB_DEVICE(0x1199, 0x6859) },	/* Sierra Wireless AirCard 885 E */
 	{ USB_DEVICE(0x1199, 0x685A) },	/* Sierra Wireless AirCard 885 E */
+	{ USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */
 	/* Sierra Wireless C885 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
 	/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 69230f01056a..97355a15bbea 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface,
 		serial->attached = 1;
 	}
 
+	/* Avoid race with tty_open and serial_install by setting the
+	 * disconnected flag and not clearing it until all ports have been
+	 * registered.
+	 */
+	serial->disconnected = 1;
+
 	if (get_free_serial(serial, num_ports, &minor) == NULL) {
 		dev_err(&interface->dev, "No more free serial devices\n");
 		goto probe_error;
@@ -1070,19 +1076,16 @@ int usb_serial_probe(struct usb_interface *interface,
 		port = serial->port[i];
 		dev_set_name(&port->dev, "ttyUSB%d", port->number);
 		dbg ("%s - registering %s", __func__, dev_name(&port->dev));
-		port->dev_state = PORT_REGISTERING;
 		device_enable_async_suspend(&port->dev);
 
 		retval = device_add(&port->dev);
-		if (retval) {
+		if (retval)
 			dev_err(&port->dev, "Error registering port device, "
 				"continuing\n");
-			port->dev_state = PORT_UNREGISTERED;
-		} else {
-			port->dev_state = PORT_REGISTERED;
-		}
 	}
 
+	serial->disconnected = 0;
+
 	usb_serial_console_init(debug, minor);
 
 exit:
@@ -1124,22 +1127,8 @@ void usb_serial_disconnect(struct usb_interface *interface)
 			}
 			kill_traffic(port);
 			cancel_work_sync(&port->work);
-			if (port->dev_state == PORT_REGISTERED) {
-
-				/* Make sure the port is bound so that the
-				 * driver's port_remove method is called.
-				 */
-				if (!port->dev.driver) {
-					int rc;
-
-					port->dev.driver =
-							&serial->type->driver;
-					rc = device_bind_driver(&port->dev);
-				}
-				port->dev_state = PORT_UNREGISTERING;
+			if (device_is_registered(&port->dev))
 				device_del(&port->dev);
-				port->dev_state = PORT_UNREGISTERED;
-			}
 		}
 	}
 	serial->type->disconnect(serial);
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index fe2d803a6347..7691c866637b 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -222,7 +222,7 @@ config USB_LIBUSUAL
 	  for usb-storage and ub drivers, and allows to switch binding
 	  of these devices without rebuilding modules.
 
-	  Typical syntax of /etc/modprobe.conf is:
+	  Typical syntax of /etc/modprobe.d/*conf is:
 
 		options libusual bias="ub"
 
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index c18538e4a6db..2653e73db623 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -132,6 +132,35 @@ static struct us_unusual_dev for_dynamic_ids =
 #undef COMPLIANT_DEV
 #undef USUAL_DEV
 
+#ifdef CONFIG_LOCKDEP
+
+static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
+
+static void us_set_lock_class(struct mutex *mutex,
+		struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_config *config = udev->actconfig;
+	int i;
+
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		if (config->interface[i] == intf)
+			break;
+	}
+
+	BUG_ON(i == config->desc.bNumInterfaces);
+
+	lockdep_set_class(mutex, &us_interface_key[i]);
+}
+
+#else
+
+static void us_set_lock_class(struct mutex *mutex,
+		struct usb_interface *intf)
+{
+}
+
+#endif
 
 #ifdef CONFIG_PM	/* Minimal support for suspend and resume */
 
@@ -895,6 +924,7 @@ int usb_stor_probe1(struct us_data **pus,
 	*pus = us = host_to_us(host);
 	memset(us, 0, sizeof(struct us_data));
 	mutex_init(&(us->dev_mutex));
+	us_set_lock_class(&us->dev_mutex, intf);
 	init_completion(&us->cmnd_ready);
 	init_completion(&(us->notify));
 	init_waitqueue_head(&us->delay_wait);