diff options
author | Tony Lindgren <tony@atomide.com> | 2018-12-02 15:51:35 -0800 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2018-12-12 10:01:39 +0530 |
commit | 2ad2af0816221ac9ce9d5c8b979868b58a696c40 (patch) | |
tree | c0801ef3a22aa9c1c8d6ac04b9820e847450b578 /drivers | |
parent | 72c0339c115b31b3c0b22b1809854136cadd49be (diff) | |
download | linux-2ad2af0816221ac9ce9d5c8b979868b58a696c40.tar.gz linux-2ad2af0816221ac9ce9d5c8b979868b58a696c40.tar.bz2 linux-2ad2af0816221ac9ce9d5c8b979868b58a696c40.zip |
phy: mapphone-mdm6600: Improve phy related runtime PM calls
I noticed that phy_pm_runtime_get_sync() and phy_pm_runtime_put() are not
currently doing anything for phy-mapphone-mdm6600, only the sysfs interface
for works for "auto" and "on".
This is because of the shared GPIO pins between mdm6600 USB port and n_gsm
port. We have not enabled runtime PM for the phy driver until after we've
booted up mdm6600 properly to the USB mode. Otherwise phy_create() would
have called pm_runtime_enable() and pm_runtime_no_callbacks() automatically
on init.
Let's fix this by registering the phy a bit later after we've powered up
the mdm6600 USB port.
And as the PM runtime support is only needed for the n_gsm mode and not for
USB, we can allow the device to idle between phy_mdm6600_power_on() and
phy_mdm6600_power_off(). Note that for suspend, runtime_pm is already
disabled for the phy so we need to check for pm_runtime_enabled().
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/phy/motorola/phy-mapphone-mdm6600.c | 71 |
1 files changed, 51 insertions, 20 deletions
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 25d456a323c2..ee184d5607bd 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -16,6 +16,7 @@ #include <linux/gpio/consumer.h> #include <linux/of_platform.h> #include <linux/phy/phy.h> +#include <linux/pinctrl/consumer.h> #define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */ #define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */ @@ -120,12 +121,22 @@ static int phy_mdm6600_power_on(struct phy *x) { struct phy_mdm6600 *ddata = phy_get_drvdata(x); struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; + int error; if (!ddata->enabled) return -ENODEV; + error = pinctrl_pm_select_default_state(ddata->dev); + if (error) + dev_warn(ddata->dev, "%s: error with default_state: %i\n", + __func__, error); + gpiod_set_value_cansleep(enable_gpio, 1); + /* Allow aggressive PM for USB, it's only needed for n_gsm port */ + if (pm_runtime_enabled(&x->dev)) + phy_pm_runtime_put(x); + return 0; } @@ -133,12 +144,26 @@ static int phy_mdm6600_power_off(struct phy *x) { struct phy_mdm6600 *ddata = phy_get_drvdata(x); struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; + int error; if (!ddata->enabled) return -ENODEV; + /* Paired with phy_pm_runtime_put() in phy_mdm6600_power_on() */ + if (pm_runtime_enabled(&x->dev)) { + error = phy_pm_runtime_get(x); + if (error < 0 && error != -EINPROGRESS) + dev_warn(ddata->dev, "%s: phy_pm_runtime_get: %i\n", + __func__, error); + } + gpiod_set_value_cansleep(enable_gpio, 0); + error = pinctrl_pm_select_sleep_state(ddata->dev); + if (error) + dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", + __func__, error); + return 0; } @@ -529,28 +554,17 @@ static int phy_mdm6600_probe(struct platform_device *pdev) ddata->dev = &pdev->dev; platform_set_drvdata(pdev, ddata); + /* Active state selected in phy_mdm6600_power_on() */ + error = pinctrl_pm_select_sleep_state(ddata->dev); + if (error) + dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", + __func__, error); + error = phy_mdm6600_init_lines(ddata); if (error) return error; phy_mdm6600_init_irq(ddata); - - ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops); - if (IS_ERR(ddata->generic_phy)) { - error = PTR_ERR(ddata->generic_phy); - goto cleanup; - } - - phy_set_drvdata(ddata->generic_phy, ddata); - - ddata->phy_provider = - devm_of_phy_provider_register(ddata->dev, - of_phy_simple_xlate); - if (IS_ERR(ddata->phy_provider)) { - error = PTR_ERR(ddata->phy_provider); - goto cleanup; - } - schedule_delayed_work(&ddata->bootup_work, 0); /* @@ -574,14 +588,31 @@ static int phy_mdm6600_probe(struct platform_device *pdev) if (error < 0) { dev_warn(ddata->dev, "failed to wake modem: %i\n", error); pm_runtime_put_noidle(ddata->dev); + goto cleanup; } + + ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops); + if (IS_ERR(ddata->generic_phy)) { + error = PTR_ERR(ddata->generic_phy); + goto idle; + } + + phy_set_drvdata(ddata->generic_phy, ddata); + + ddata->phy_provider = + devm_of_phy_provider_register(ddata->dev, + of_phy_simple_xlate); + if (IS_ERR(ddata->phy_provider)) + error = PTR_ERR(ddata->phy_provider); + +idle: pm_runtime_mark_last_busy(ddata->dev); pm_runtime_put_autosuspend(ddata->dev); - return 0; - cleanup: - phy_mdm6600_device_power_off(ddata); + if (error < 0) + phy_mdm6600_device_power_off(ddata); + return error; } |