diff options
author | Mike Christie <michael.christie@oracle.com> | 2023-04-07 15:05:51 -0500 |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2023-04-11 21:55:36 -0400 |
commit | 394f811848827ad23d2b43e94e5d72a24cfbc39f (patch) | |
tree | 55a98d2892e0e390c9ab44cdd3172f39feba0dee /drivers | |
parent | 8455799d2d4676b746dce3d59cbc8060a6223619 (diff) | |
download | linux-394f811848827ad23d2b43e94e5d72a24cfbc39f.tar.gz linux-394f811848827ad23d2b43e94e5d72a24cfbc39f.tar.bz2 linux-394f811848827ad23d2b43e94e5d72a24cfbc39f.zip |
scsi: target: Add block PR support to iblock
This adds support for the block PR callouts to target_core_iblock. This
patch doesn't attempt to implement the entire spec because there's no way
support it all like SPEC_I_PT and ALL_TG_PT. This only supports
exporting the iblock device from one path on the local target.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230407200551.12660-19-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/target/target_core_iblock.c | 271 |
1 files changed, 266 insertions, 5 deletions
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index d93f24f9687d..e6029ea87e2f 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -23,13 +23,16 @@ #include <linux/file.h> #include <linux/module.h> #include <linux/scatterlist.h> +#include <linux/pr.h> #include <scsi/scsi_proto.h> +#include <scsi/scsi_common.h> #include <asm/unaligned.h> #include <target/target_core_base.h> #include <target/target_core_backend.h> #include "target_core_iblock.h" +#include "target_core_pr.h" #define IBLOCK_MAX_BIO_PER_TASK 32 /* max # of bios to submit at a time */ #define IBLOCK_BIO_POOL_SIZE 128 @@ -310,7 +313,7 @@ static sector_t iblock_get_blocks(struct se_device *dev) return blocks_long; } -static void iblock_complete_cmd(struct se_cmd *cmd) +static void iblock_complete_cmd(struct se_cmd *cmd, blk_status_t blk_status) { struct iblock_req *ibr = cmd->priv; u8 status; @@ -318,7 +321,9 @@ static void iblock_complete_cmd(struct se_cmd *cmd) if (!refcount_dec_and_test(&ibr->pending)) return; - if (atomic_read(&ibr->ib_bio_err_cnt)) + if (blk_status == BLK_STS_RESV_CONFLICT) + status = SAM_STAT_RESERVATION_CONFLICT; + else if (atomic_read(&ibr->ib_bio_err_cnt)) status = SAM_STAT_CHECK_CONDITION; else status = SAM_STAT_GOOD; @@ -331,6 +336,7 @@ static void iblock_bio_done(struct bio *bio) { struct se_cmd *cmd = bio->bi_private; struct iblock_req *ibr = cmd->priv; + blk_status_t blk_status = bio->bi_status; if (bio->bi_status) { pr_err("bio error: %p, err: %d\n", bio, bio->bi_status); @@ -343,7 +349,7 @@ static void iblock_bio_done(struct bio *bio) bio_put(bio); - iblock_complete_cmd(cmd); + iblock_complete_cmd(cmd, blk_status); } static struct bio *iblock_get_bio(struct se_cmd *cmd, sector_t lba, u32 sg_num, @@ -759,7 +765,7 @@ iblock_execute_rw(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents, if (!sgl_nents) { refcount_set(&ibr->pending, 1); - iblock_complete_cmd(cmd); + iblock_complete_cmd(cmd, BLK_STS_OK); return 0; } @@ -817,7 +823,7 @@ iblock_execute_rw(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents, } iblock_submit_bios(&list); - iblock_complete_cmd(cmd); + iblock_complete_cmd(cmd, BLK_STS_OK); return 0; fail_put_bios: @@ -829,6 +835,258 @@ fail: return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } +static sense_reason_t iblock_execute_pr_out(struct se_cmd *cmd, u8 sa, u64 key, + u64 sa_key, u8 type, bool aptpl) +{ + struct se_device *dev = cmd->se_dev; + struct iblock_dev *ib_dev = IBLOCK_DEV(dev); + struct block_device *bdev = ib_dev->ibd_bd; + const struct pr_ops *ops = bdev->bd_disk->fops->pr_ops; + int ret; + + if (!ops) { + pr_err("Block device does not support pr_ops but iblock device has been configured for PR passthrough.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + switch (sa) { + case PRO_REGISTER: + case PRO_REGISTER_AND_IGNORE_EXISTING_KEY: + if (!ops->pr_register) { + pr_err("block device does not support pr_register.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + /* The block layer pr ops always enables aptpl */ + if (!aptpl) + pr_info("APTPL not set by initiator, but will be used.\n"); + + ret = ops->pr_register(bdev, key, sa_key, + sa == PRO_REGISTER ? 0 : PR_FL_IGNORE_KEY); + break; + case PRO_RESERVE: + if (!ops->pr_reserve) { + pr_err("block_device does not support pr_reserve.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + ret = ops->pr_reserve(bdev, key, scsi_pr_type_to_block(type), 0); + break; + case PRO_CLEAR: + if (!ops->pr_clear) { + pr_err("block_device does not support pr_clear.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + ret = ops->pr_clear(bdev, key); + break; + case PRO_PREEMPT: + case PRO_PREEMPT_AND_ABORT: + if (!ops->pr_clear) { + pr_err("block_device does not support pr_preempt.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + ret = ops->pr_preempt(bdev, key, sa_key, + scsi_pr_type_to_block(type), + sa == PRO_PREEMPT ? false : true); + break; + case PRO_RELEASE: + if (!ops->pr_clear) { + pr_err("block_device does not support pr_pclear.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + ret = ops->pr_release(bdev, key, scsi_pr_type_to_block(type)); + break; + default: + pr_err("Unknown PERSISTENT_RESERVE_OUT SA: 0x%02x\n", sa); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + if (!ret) + return TCM_NO_SENSE; + else if (ret == PR_STS_RESERVATION_CONFLICT) + return TCM_RESERVATION_CONFLICT; + else + return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; +} + +static void iblock_pr_report_caps(unsigned char *param_data) +{ + u16 len = 8; + + put_unaligned_be16(len, ¶m_data[0]); + /* + * When using the pr_ops passthrough method we only support exporting + * the device through one target port because from the backend module + * level we can't see the target port config. As a result we only + * support registration directly from the I_T nexus the cmd is sent + * through and do not set ATP_C here. + * + * The block layer pr_ops do not support passing in initiators so + * we don't set SIP_C here. + */ + /* PTPL_C: Persistence across Target Power Loss bit */ + param_data[2] |= 0x01; + /* + * We are filling in the PERSISTENT RESERVATION TYPE MASK below, so + * set the TMV: Task Mask Valid bit. + */ + param_data[3] |= 0x80; + /* + * Change ALLOW COMMANDs to 0x20 or 0x40 later from Table 166 + */ + param_data[3] |= 0x10; /* ALLOW COMMANDs field 001b */ + /* + * PTPL_A: Persistence across Target Power Loss Active bit. The block + * layer pr ops always enables this so report it active. + */ + param_data[3] |= 0x01; + /* + * Setup the PERSISTENT RESERVATION TYPE MASK from Table 212 spc4r37. + */ + param_data[4] |= 0x80; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ + param_data[4] |= 0x40; /* PR_TYPE_EXCLUSIVE_ACCESS_REGONLY */ + param_data[4] |= 0x20; /* PR_TYPE_WRITE_EXCLUSIVE_REGONLY */ + param_data[4] |= 0x08; /* PR_TYPE_EXCLUSIVE_ACCESS */ + param_data[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */ + param_data[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ +} + +static sense_reason_t iblock_pr_read_keys(struct se_cmd *cmd, + unsigned char *param_data) +{ + struct se_device *dev = cmd->se_dev; + struct iblock_dev *ib_dev = IBLOCK_DEV(dev); + struct block_device *bdev = ib_dev->ibd_bd; + const struct pr_ops *ops = bdev->bd_disk->fops->pr_ops; + int i, len, paths, data_offset; + struct pr_keys *keys; + sense_reason_t ret; + + if (!ops) { + pr_err("Block device does not support pr_ops but iblock device has been configured for PR passthrough.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + if (!ops->pr_read_keys) { + pr_err("Block device does not support read_keys.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + /* + * We don't know what's under us, but dm-multipath will register every + * path with the same key, so start off with enough space for 16 paths. + * which is not a lot of memory and should normally be enough. + */ + paths = 16; +retry: + len = 8 * paths; + keys = kzalloc(sizeof(*keys) + len, GFP_KERNEL); + if (!keys) + return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + + keys->num_keys = paths; + if (!ops->pr_read_keys(bdev, keys)) { + if (keys->num_keys > paths) { + kfree(keys); + paths *= 2; + goto retry; + } + } else { + ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + goto free_keys; + } + + ret = TCM_NO_SENSE; + + put_unaligned_be32(keys->generation, ¶m_data[0]); + if (!keys->num_keys) { + put_unaligned_be32(0, ¶m_data[4]); + goto free_keys; + } + + put_unaligned_be32(8 * keys->num_keys, ¶m_data[4]); + + data_offset = 8; + for (i = 0; i < keys->num_keys; i++) { + if (data_offset + 8 > cmd->data_length) + break; + + put_unaligned_be64(keys->keys[i], ¶m_data[data_offset]); + data_offset += 8; + } + +free_keys: + kfree(keys); + return ret; +} + +static sense_reason_t iblock_pr_read_reservation(struct se_cmd *cmd, + unsigned char *param_data) +{ + struct se_device *dev = cmd->se_dev; + struct iblock_dev *ib_dev = IBLOCK_DEV(dev); + struct block_device *bdev = ib_dev->ibd_bd; + const struct pr_ops *ops = bdev->bd_disk->fops->pr_ops; + struct pr_held_reservation rsv = { }; + + if (!ops) { + pr_err("Block device does not support pr_ops but iblock device has been configured for PR passthrough.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + if (!ops->pr_read_reservation) { + pr_err("Block device does not support read_keys.\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + if (ops->pr_read_reservation(bdev, &rsv)) + return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + + put_unaligned_be32(rsv.generation, ¶m_data[0]); + if (!block_pr_type_to_scsi(rsv.type)) { + put_unaligned_be32(0, ¶m_data[4]); + return TCM_NO_SENSE; + } + + put_unaligned_be32(16, ¶m_data[4]); + + if (cmd->data_length < 16) + return TCM_NO_SENSE; + put_unaligned_be64(rsv.key, ¶m_data[8]); + + if (cmd->data_length < 22) + return TCM_NO_SENSE; + param_data[21] = block_pr_type_to_scsi(rsv.type); + + return TCM_NO_SENSE; +} + +static sense_reason_t iblock_execute_pr_in(struct se_cmd *cmd, u8 sa, + unsigned char *param_data) +{ + sense_reason_t ret = TCM_NO_SENSE; + + switch (sa) { + case PRI_REPORT_CAPABILITIES: + iblock_pr_report_caps(param_data); + break; + case PRI_READ_KEYS: + ret = iblock_pr_read_keys(cmd, param_data); + break; + case PRI_READ_RESERVATION: + ret = iblock_pr_read_reservation(cmd, param_data); + break; + default: + pr_err("Unknown PERSISTENT_RESERVE_IN SA: 0x%02x\n", sa); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + return ret; +} + static sector_t iblock_get_alignment_offset_lbas(struct se_device *dev) { struct iblock_dev *ib_dev = IBLOCK_DEV(dev); @@ -874,6 +1132,8 @@ static struct exec_cmd_ops iblock_exec_cmd_ops = { .execute_sync_cache = iblock_execute_sync_cache, .execute_write_same = iblock_execute_write_same, .execute_unmap = iblock_execute_unmap, + .execute_pr_out = iblock_execute_pr_out, + .execute_pr_in = iblock_execute_pr_in, }; static sense_reason_t @@ -890,6 +1150,7 @@ static bool iblock_get_write_cache(struct se_device *dev) static const struct target_backend_ops iblock_ops = { .name = "iblock", .inquiry_prod = "IBLOCK", + .transport_flags_changeable = TRANSPORT_FLAG_PASSTHROUGH_PGR, .inquiry_rev = IBLOCK_VERSION, .owner = THIS_MODULE, .attach_hba = iblock_attach_hba, |