summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorAndrew Vasquez <andrew.vasquez@qlogic.com>2008-08-13 21:36:56 -0700
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2008-08-16 10:21:09 -0500
commit6390d1f33faecf48e31f27dd7dbe928540f8acfc (patch)
treef6ff0fa0888f89117618e832bdcd257da0f5803d /drivers
parentfe42625cdf0d4e06f01e365897a64b68d7f7de7d (diff)
downloadlinux-6390d1f33faecf48e31f27dd7dbe928540f8acfc.tar.gz
linux-6390d1f33faecf48e31f27dd7dbe928540f8acfc.tar.bz2
linux-6390d1f33faecf48e31f27dd7dbe928540f8acfc.zip
[SCSI] qla2xxx: Correct synchronization of software/firmware fcport states.
Greg Wettstein (greg@enjellic.com) noted: http://article.gmane.org/gmane.linux.scsi/43409 on a reboot of a previously recognized SCST target, the initiator driver would be unable to re-recognize the device as a target. It turns out that prior to the SCST software reloading and returning it's "target-capable" abilities in the PRLI payload, the HBA would be re-initialized as an initiator-only type port. Since initiators typically classify themselves as an FCP-2 capable device, both software and firmware do not perform an explicit logout during port-loss. Unfortunately, as can be seen by the failure case, when the port (now target-capable) returns, firmware performs an ADISC without a follow-on PRLI, leaving stale 'initiator-only' data in the firmware's port database. Correct the discrepancy by performing the explicit logout during the transport's request to terminate-rport-io, thus synchronizing port states and ensuring a follow-on PRLI is performed. Reported-by: Greg Wettstein <greg@enjellic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/qla2xxx/qla_attr.c11
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index a319a20ed440..45e7dcb4b34d 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -993,6 +993,17 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
{
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+ /*
+ * At this point all fcport's software-states are cleared. Perform any
+ * final cleanup of firmware resources (PCBs and XCBs).
+ */
+ if (fcport->loop_id != FC_NO_LOOP_ID) {
+ fcport->ha->isp_ops->fabric_logout(fcport->ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
+ fcport->loop_id = FC_NO_LOOP_ID;
+ }
+
qla2x00_abort_fcport_cmds(fcport);
scsi_target_unblock(&rport->dev);
}