diff options
author | Finn Thain <fthain@telegraphics.com.au> | 2018-07-02 04:21:18 -0400 |
---|---|---|
committer | Michael Ellerman <mpe@ellerman.id.au> | 2018-07-31 19:56:40 +1000 |
commit | c70c35da52c064983199b1b1cbd4daa5a07ef60c (patch) | |
tree | 9c4c0a52e1cfadf7340c356357ce2d09be7af0e4 /drivers | |
parent | c57902d52e2d61299872ddc89645d3aa299f1b91 (diff) | |
download | linux-c70c35da52c064983199b1b1cbd4daa5a07ef60c.tar.gz linux-c70c35da52c064983199b1b1cbd4daa5a07ef60c.tar.bz2 linux-c70c35da52c064983199b1b1cbd4daa5a07ef60c.zip |
macintosh/via-pmu: Replace via pointer with via1 and via2 pointers
On most PowerPC Macs, the PMU driver uses the shift register and
IO port B from a single VIA chip.
On 68k and early PowerPC PowerBooks, the driver uses the shift register
from one VIA chip together with IO port B from another.
Replace via with via1 and via2 to accommodate this. For the
CONFIG_PPC_PMAC case, set via1 = via2 so there is no change.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/macintosh/via-pmu.c | 142 |
1 files changed, 69 insertions, 73 deletions
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 6a6f1666712e..2557f3e49f18 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -76,7 +76,6 @@ #define BATTERY_POLLING_COUNT 2 static DEFINE_MUTEX(pmu_info_proc_mutex); -static volatile unsigned char __iomem *via; /* VIA registers - spaced 0x200 bytes apart */ #define RS 0x200 /* skip between registers */ @@ -145,6 +144,8 @@ static struct device_node *vias; static int pmu_kind = PMU_UNKNOWN; static int pmu_fully_inited; static int pmu_has_adb; +static volatile unsigned char __iomem *via1; +static volatile unsigned char __iomem *via2; static struct device_node *gpio_node; static unsigned char __iomem *gpio_reg; static int gpio_irq = 0; @@ -340,14 +341,14 @@ int __init find_via_pmu(void) } else pmu_kind = PMU_UNKNOWN; - via = ioremap(taddr, 0x2000); - if (via == NULL) { + via1 = via2 = ioremap(taddr, 0x2000); + if (via1 == NULL) { printk(KERN_ERR "via-pmu: Can't map address !\n"); goto fail_via_remap; } - out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */ - out_8(&via[IFR], 0x7f); /* clear IFR */ + out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */ + out_8(&via1[IFR], 0x7f); /* clear IFR */ pmu_state = idle; @@ -362,8 +363,8 @@ int __init find_via_pmu(void) return 1; fail_init: - iounmap(via); - via = NULL; + iounmap(via1); + via1 = via2 = NULL; fail_via_remap: iounmap(gpio_reg); gpio_reg = NULL; @@ -437,7 +438,7 @@ static int __init via_pmu_start(void) } /* Enable interrupts */ - out_8(&via[IER], IER_SET | SR_INT | CB1_INT); + out_8(&via1[IER], IER_SET | SR_INT | CB1_INT); pmu_fully_inited = 1; @@ -535,8 +536,8 @@ init_pmu(void) struct adb_request req; /* Negate TREQ. Set TACK to input and TREQ to output. */ - out_8(&via[B], in_8(&via[B]) | TREQ); - out_8(&via[DIRB], (in_8(&via[DIRB]) | TREQ) & ~TACK); + out_8(&via2[B], in_8(&via2[B]) | TREQ); + out_8(&via2[DIRB], (in_8(&via2[DIRB]) | TREQ) & ~TACK); pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); timeout = 100000; @@ -1137,7 +1138,7 @@ wait_for_ack(void) * reported */ int timeout = 4000; - while ((in_8(&via[B]) & TACK) == 0) { + while ((in_8(&via2[B]) & TACK) == 0) { if (--timeout < 0) { printk(KERN_ERR "PMU not responding (!ack)\n"); return; @@ -1151,23 +1152,19 @@ wait_for_ack(void) static inline void send_byte(int x) { - volatile unsigned char __iomem *v = via; - - out_8(&v[ACR], in_8(&v[ACR]) | SR_OUT | SR_EXT); - out_8(&v[SR], x); - out_8(&v[B], in_8(&v[B]) & ~TREQ); /* assert TREQ */ - (void)in_8(&v[B]); + out_8(&via1[ACR], in_8(&via1[ACR]) | SR_OUT | SR_EXT); + out_8(&via1[SR], x); + out_8(&via2[B], in_8(&via2[B]) & ~TREQ); /* assert TREQ */ + (void)in_8(&via2[B]); } static inline void recv_byte(void) { - volatile unsigned char __iomem *v = via; - - out_8(&v[ACR], (in_8(&v[ACR]) & ~SR_OUT) | SR_EXT); - in_8(&v[SR]); /* resets SR */ - out_8(&v[B], in_8(&v[B]) & ~TREQ); - (void)in_8(&v[B]); + out_8(&via1[ACR], (in_8(&via1[ACR]) & ~SR_OUT) | SR_EXT); + in_8(&via1[SR]); /* resets SR */ + out_8(&via2[B], in_8(&via2[B]) & ~TREQ); + (void)in_8(&via2[B]); } static inline void @@ -1270,7 +1267,7 @@ pmu_suspend(void) if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) { if (gpio_irq >= 0) disable_irq_nosync(gpio_irq); - out_8(&via[IER], CB1_INT | IER_CLR); + out_8(&via1[IER], CB1_INT | IER_CLR); spin_unlock_irqrestore(&pmu_lock, flags); break; } @@ -1294,7 +1291,7 @@ pmu_resume(void) adb_int_pending = 1; if (gpio_irq >= 0) enable_irq(gpio_irq); - out_8(&via[IER], CB1_INT | IER_SET); + out_8(&via1[IER], CB1_INT | IER_SET); spin_unlock_irqrestore(&pmu_lock, flags); pmu_poll(); } @@ -1419,20 +1416,20 @@ pmu_sr_intr(void) struct adb_request *req; int bite = 0; - if (in_8(&via[B]) & TREQ) { - printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via[B])); + if (in_8(&via2[B]) & TREQ) { + printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via2[B])); return NULL; } /* The ack may not yet be low when we get the interrupt */ - while ((in_8(&via[B]) & TACK) != 0) + while ((in_8(&via2[B]) & TACK) != 0) ; /* if reading grab the byte, and reset the interrupt */ if (pmu_state == reading || pmu_state == reading_intr) - bite = in_8(&via[SR]); + bite = in_8(&via1[SR]); /* reset TREQ and wait for TACK to go high */ - out_8(&via[B], in_8(&via[B]) | TREQ); + out_8(&via2[B], in_8(&via2[B]) | TREQ); wait_for_ack(); switch (pmu_state) { @@ -1533,17 +1530,17 @@ via_pmu_interrupt(int irq, void *arg) ++disable_poll; for (;;) { - intr = in_8(&via[IFR]) & (SR_INT | CB1_INT); + intr = in_8(&via1[IFR]) & (SR_INT | CB1_INT); if (intr == 0) break; handled = 1; if (++nloop > 1000) { printk(KERN_DEBUG "PMU: stuck in intr loop, " "intr=%x, ier=%x pmu_state=%d\n", - intr, in_8(&via[IER]), pmu_state); + intr, in_8(&via1[IER]), pmu_state); break; } - out_8(&via[IFR], intr); + out_8(&via1[IFR], intr); if (intr & CB1_INT) { adb_int_pending = 1; pmu_irq_stats[0]++; @@ -1725,29 +1722,29 @@ static u32 save_via[8]; static void save_via_state(void) { - save_via[0] = in_8(&via[ANH]); - save_via[1] = in_8(&via[DIRA]); - save_via[2] = in_8(&via[B]); - save_via[3] = in_8(&via[DIRB]); - save_via[4] = in_8(&via[PCR]); - save_via[5] = in_8(&via[ACR]); - save_via[6] = in_8(&via[T1CL]); - save_via[7] = in_8(&via[T1CH]); + save_via[0] = in_8(&via1[ANH]); + save_via[1] = in_8(&via1[DIRA]); + save_via[2] = in_8(&via1[B]); + save_via[3] = in_8(&via1[DIRB]); + save_via[4] = in_8(&via1[PCR]); + save_via[5] = in_8(&via1[ACR]); + save_via[6] = in_8(&via1[T1CL]); + save_via[7] = in_8(&via1[T1CH]); } static void restore_via_state(void) { - out_8(&via[ANH], save_via[0]); - out_8(&via[DIRA], save_via[1]); - out_8(&via[B], save_via[2]); - out_8(&via[DIRB], save_via[3]); - out_8(&via[PCR], save_via[4]); - out_8(&via[ACR], save_via[5]); - out_8(&via[T1CL], save_via[6]); - out_8(&via[T1CH], save_via[7]); - out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */ - out_8(&via[IFR], 0x7f); /* clear IFR */ - out_8(&via[IER], IER_SET | SR_INT | CB1_INT); + out_8(&via1[ANH], save_via[0]); + out_8(&via1[DIRA], save_via[1]); + out_8(&via1[B], save_via[2]); + out_8(&via1[DIRB], save_via[3]); + out_8(&via1[PCR], save_via[4]); + out_8(&via1[ACR], save_via[5]); + out_8(&via1[T1CL], save_via[6]); + out_8(&via1[T1CH], save_via[7]); + out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */ + out_8(&via1[IFR], 0x7f); /* clear IFR */ + out_8(&via1[IER], IER_SET | SR_INT | CB1_INT); } #define GRACKLE_PM (1<<7) @@ -2389,33 +2386,33 @@ device_initcall(pmu_device_init); #ifdef DEBUG_SLEEP static inline void -polled_handshake(volatile unsigned char __iomem *via) +polled_handshake(void) { - via[B] &= ~TREQ; eieio(); - while ((via[B] & TACK) != 0) + via2[B] &= ~TREQ; eieio(); + while ((via2[B] & TACK) != 0) ; - via[B] |= TREQ; eieio(); - while ((via[B] & TACK) == 0) + via2[B] |= TREQ; eieio(); + while ((via2[B] & TACK) == 0) ; } static inline void -polled_send_byte(volatile unsigned char __iomem *via, int x) +polled_send_byte(int x) { - via[ACR] |= SR_OUT | SR_EXT; eieio(); - via[SR] = x; eieio(); - polled_handshake(via); + via1[ACR] |= SR_OUT | SR_EXT; eieio(); + via1[SR] = x; eieio(); + polled_handshake(); } static inline int -polled_recv_byte(volatile unsigned char __iomem *via) +polled_recv_byte(void) { int x; - via[ACR] = (via[ACR] & ~SR_OUT) | SR_EXT; eieio(); - x = via[SR]; eieio(); - polled_handshake(via); - x = via[SR]; eieio(); + via1[ACR] = (via1[ACR] & ~SR_OUT) | SR_EXT; eieio(); + x = via1[SR]; eieio(); + polled_handshake(); + x = via1[SR]; eieio(); return x; } @@ -2424,7 +2421,6 @@ pmu_polled_request(struct adb_request *req) { unsigned long flags; int i, l, c; - volatile unsigned char __iomem *v = via; req->complete = 1; c = req->data[0]; @@ -2436,21 +2432,21 @@ pmu_polled_request(struct adb_request *req) while (pmu_state != idle) pmu_poll(); - while ((via[B] & TACK) == 0) + while ((via2[B] & TACK) == 0) ; - polled_send_byte(v, c); + polled_send_byte(c); if (l < 0) { l = req->nbytes - 1; - polled_send_byte(v, l); + polled_send_byte(l); } for (i = 1; i <= l; ++i) - polled_send_byte(v, req->data[i]); + polled_send_byte(req->data[i]); l = pmu_data_len[c][1]; if (l < 0) - l = polled_recv_byte(v); + l = polled_recv_byte(); for (i = 0; i < l; ++i) - req->reply[i + req->reply_len] = polled_recv_byte(v); + req->reply[i + req->reply_len] = polled_recv_byte(); if (req->done) (*req->done)(req); |