diff options
author | Zhu Yi <yi.zhu@intel.com> | 2008-01-24 02:19:38 -0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-01-28 15:09:58 -0800 |
commit | e655b9f03f41c7a84fb74d6619abf844d7f2ab65 (patch) | |
tree | 219be4a1e49e9d630874684b6996e9d0a73d166c /drivers | |
parent | 5a66926aa9230810704fd5a127966215fd58881e (diff) | |
download | linux-e655b9f03f41c7a84fb74d6619abf844d7f2ab65.tar.gz linux-e655b9f03f41c7a84fb74d6619abf844d7f2ab65.tar.bz2 linux-e655b9f03f41c7a84fb74d6619abf844d7f2ab65.zip |
iwlwifi: fix problem when rf_killswitch change during suspend/resume
After we delay device initialization until interface up, there are more
conditions for the hardware rf_kill switch states during suspend and
resume. For example, before suspend we can have interface up or down,
rf_kill enable or disable; before resume we can have rf_kill enable or
disable. So there are totally 2^3 = 8 conditions to handle. This patch
addressed this problem and makes sure every condition works correctly.
This patch also merges the device suspend and resume handlers with the
mac_start and mac_stop code since they are basically doing the same
thing.
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl3945-base.c | 124 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl4965-base.c | 133 |
2 files changed, 90 insertions, 167 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index e0e9bbdf140f..b9a74f5eea51 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6340,7 +6340,19 @@ static int __iwl3945_up(struct iwl3945_priv *priv) if (test_bit(STATUS_RF_KILL_SW, &priv->status)) { IWL_WARNING("Radio disabled by SW RF kill (module " "parameter)\n"); - return 0; + return -ENODEV; + } + + /* If platform's RF_KILL switch is NOT set to KILL */ + if (iwl3945_read32(priv, CSR_GP_CNTRL) & + CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + clear_bit(STATUS_RF_KILL_HW, &priv->status); + else { + set_bit(STATUS_RF_KILL_HW, &priv->status); + if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) { + IWL_WARNING("Radio disabled by HW RF Kill switch\n"); + return -ENODEV; + } } if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { @@ -6375,6 +6387,10 @@ static int __iwl3945_up(struct iwl3945_priv *priv) memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, priv->ucode_data.len); + /* We return success when we resume from suspend and rf_kill is on. */ + if (test_bit(STATUS_RF_KILL_HW, &priv->status)) + return 0; + for (i = 0; i < MAX_HW_RESTARTS; i++) { iwl3945_clear_stations_table(priv); @@ -6919,12 +6935,18 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw) } } - IWL_DEBUG_INFO("Start UP work.\n"); - __iwl3945_up(priv); + ret = __iwl3945_up(priv); - priv->is_open = 1; mutex_unlock(&priv->mutex); + if (ret) + goto out_release_irq; + + IWL_DEBUG_INFO("Start UP work.\n"); + + if (test_bit(STATUS_IN_SUSPEND, &priv->status)) + return 0; + /* Wait for START_ALIVE from ucode. Otherwise callbacks from * mac80211 will not be run successfully. */ ret = wait_event_interruptible_timeout(priv->wait_command_queue, @@ -6939,6 +6961,7 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw) } } + priv->is_open = 1; IWL_DEBUG_MAC80211("leave\n"); return 0; @@ -6946,6 +6969,9 @@ out_release_irq: free_irq(priv->pci_dev->irq, priv); out_disable_msi: pci_disable_msi(priv->pci_dev); + pci_disable_device(priv->pci_dev); + priv->is_open = 0; + IWL_DEBUG_MAC80211("leave - failed\n"); return ret; } @@ -6955,12 +6981,17 @@ static void iwl3945_mac_stop(struct ieee80211_hw *hw) IWL_DEBUG_MAC80211("enter\n"); - /* stop mac, cancel any scan request and clear - * RXON_FILTER_ASSOC_MSK BIT - */ + if (!priv->is_open) { + IWL_DEBUG_MAC80211("leave - skip\n"); + return; + } + priv->is_open = 0; if (iwl3945_is_ready_rf(priv)) { + /* stop mac, cancel any scan request and clear + * RXON_FILTER_ASSOC_MSK BIT + */ mutex_lock(&priv->mutex); iwl3945_scan_cancel_timeout(priv, 100); cancel_delayed_work(&priv->post_associate); @@ -7334,7 +7365,6 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw, mutex_unlock(&priv->mutex); IWL_DEBUG_MAC80211("leave\n"); - } static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) @@ -8731,89 +8761,27 @@ static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct iwl3945_priv *priv = pci_get_drvdata(pdev); - set_bit(STATUS_IN_SUSPEND, &priv->status); - - /* Take down the device; powers it off, etc. */ - iwl3945_down(priv); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); + if (priv->is_open) { + set_bit(STATUS_IN_SUSPEND, &priv->status); + iwl3945_mac_stop(priv->hw); + priv->is_open = 1; + } - pci_save_state(pdev); - pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; } -static void iwl3945_resume(struct iwl3945_priv *priv) -{ - unsigned long flags; - - /* The following it a temporary work around due to the - * suspend / resume not fully initializing the NIC correctly. - * Without all of the following, resume will not attempt to take - * down the NIC (it shouldn't really need to) and will just try - * and bring the NIC back up. However that fails during the - * ucode verification process. This then causes iwl3945_down to be - * called *after* iwl3945_hw_nic_init() has succeeded -- which - * then lets the next init sequence succeed. So, we've - * replicated all of that NIC init code here... */ - - iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF); - - iwl3945_hw_nic_init(priv); - - iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF); - iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* tell the device to stop sending interrupts */ - iwl3945_disable_interrupts(priv); - - spin_lock_irqsave(&priv->lock, flags); - iwl3945_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - - if (!iwl3945_grab_nic_access(priv)) { - iwl3945_write_prph(priv, APMG_CLK_DIS_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - iwl3945_release_nic_access(priv); - } - spin_unlock_irqrestore(&priv->lock, flags); - - udelay(5); - - iwl3945_hw_nic_reset(priv); - - /* Bring the device back up */ - clear_bit(STATUS_IN_SUSPEND, &priv->status); - queue_work(priv->workqueue, &priv->up); -} - static int iwl3945_pci_resume(struct pci_dev *pdev) { struct iwl3945_priv *priv = pci_get_drvdata(pdev); - int err; - - printk(KERN_INFO "Coming out of suspend...\n"); pci_set_power_state(pdev, PCI_D0); - err = pci_enable_device(pdev); - pci_restore_state(pdev); - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries - * from interfering with C3 CPU state. pci_restore_state won't help - * here since it only restores the first 64 bytes pci config header. - */ - pci_write_config_byte(pdev, 0x41, 0x00); - - iwl3945_resume(priv); + if (priv->is_open) + iwl3945_mac_start(priv->hw); + clear_bit(STATUS_IN_SUSPEND, &priv->status); return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 98f09e6e9f8c..811e41b7f664 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -6761,7 +6761,6 @@ static void iwl4965_down(struct iwl4965_priv *priv) static int __iwl4965_up(struct iwl4965_priv *priv) { int rc, i; - u32 hw_rf_kill = 0; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { IWL_WARNING("Exit pending; will not bring the NIC up\n"); @@ -6771,7 +6770,19 @@ static int __iwl4965_up(struct iwl4965_priv *priv) if (test_bit(STATUS_RF_KILL_SW, &priv->status)) { IWL_WARNING("Radio disabled by SW RF kill (module " "parameter)\n"); - return 0; + return -ENODEV; + } + + /* If platform's RF_KILL switch is NOT set to KILL */ + if (iwl4965_read32(priv, CSR_GP_CNTRL) & + CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + clear_bit(STATUS_RF_KILL_HW, &priv->status); + else { + set_bit(STATUS_RF_KILL_HW, &priv->status); + if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) { + IWL_WARNING("Radio disabled by HW RF Kill switch\n"); + return -ENODEV; + } } if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { @@ -6806,17 +6817,9 @@ static int __iwl4965_up(struct iwl4965_priv *priv) memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, priv->ucode_data.len); - /* If platform's RF_KILL switch is set to KILL, - * wait for BIT_INT_RF_KILL interrupt before loading uCode - * and getting things started */ - if (!(iwl4965_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) - hw_rf_kill = 1; - - if (test_bit(STATUS_RF_KILL_HW, &priv->status) || hw_rf_kill) { - IWL_WARNING("Radio disabled by HW RF Kill switch\n"); + /* We return success when we resume from suspend and rf_kill is on. */ + if (test_bit(STATUS_RF_KILL_HW, &priv->status)) return 0; - } for (i = 0; i < MAX_HW_RESTARTS; i++) { @@ -7379,12 +7382,18 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) } } - IWL_DEBUG_INFO("Start UP work.\n"); - __iwl4965_up(priv); + ret = __iwl4965_up(priv); - priv->is_open = 1; mutex_unlock(&priv->mutex); + if (ret) + goto out_release_irq; + + IWL_DEBUG_INFO("Start UP work done.\n"); + + if (test_bit(STATUS_IN_SUSPEND, &priv->status)) + return 0; + /* Wait for START_ALIVE from ucode. Otherwise callbacks from * mac80211 will not be run successfully. */ ret = wait_event_interruptible_timeout(priv->wait_command_queue, @@ -7399,6 +7408,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) } } + priv->is_open = 1; IWL_DEBUG_MAC80211("leave\n"); return 0; @@ -7406,6 +7416,9 @@ out_release_irq: free_irq(priv->pci_dev->irq, priv); out_disable_msi: pci_disable_msi(priv->pci_dev); + pci_disable_device(priv->pci_dev); + priv->is_open = 0; + IWL_DEBUG_MAC80211("leave - failed\n"); return ret; } @@ -7415,12 +7428,17 @@ static void iwl4965_mac_stop(struct ieee80211_hw *hw) IWL_DEBUG_MAC80211("enter\n"); - /* stop mac, cancel any scan request and clear - * RXON_FILTER_ASSOC_MSK BIT - */ + if (!priv->is_open) { + IWL_DEBUG_MAC80211("leave - skip\n"); + return; + } + priv->is_open = 0; if (iwl4965_is_ready_rf(priv)) { + /* stop mac, cancel any scan request and clear + * RXON_FILTER_ASSOC_MSK BIT + */ mutex_lock(&priv->mutex); iwl4965_scan_cancel_timeout(priv, 100); cancel_delayed_work(&priv->post_associate); @@ -8152,7 +8170,6 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) mutex_unlock(&priv->mutex); IWL_DEBUG_MAC80211("leave\n"); - } static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, @@ -9327,89 +9344,27 @@ static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct iwl4965_priv *priv = pci_get_drvdata(pdev); - set_bit(STATUS_IN_SUSPEND, &priv->status); - - /* Take down the device; powers it off, etc. */ - iwl4965_down(priv); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); + if (priv->is_open) { + set_bit(STATUS_IN_SUSPEND, &priv->status); + iwl4965_mac_stop(priv->hw); + priv->is_open = 1; + } - pci_save_state(pdev); - pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; } -static void iwl4965_resume(struct iwl4965_priv *priv) -{ - unsigned long flags; - - /* The following it a temporary work around due to the - * suspend / resume not fully initializing the NIC correctly. - * Without all of the following, resume will not attempt to take - * down the NIC (it shouldn't really need to) and will just try - * and bring the NIC back up. However that fails during the - * ucode verification process. This then causes iwl4965_down to be - * called *after* iwl4965_hw_nic_init() has succeeded -- which - * then lets the next init sequence succeed. So, we've - * replicated all of that NIC init code here... */ - - iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF); - - iwl4965_hw_nic_init(priv); - - iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF); - iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* tell the device to stop sending interrupts */ - iwl4965_disable_interrupts(priv); - - spin_lock_irqsave(&priv->lock, flags); - iwl4965_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - - if (!iwl4965_grab_nic_access(priv)) { - iwl4965_write_prph(priv, APMG_CLK_DIS_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - iwl4965_release_nic_access(priv); - } - spin_unlock_irqrestore(&priv->lock, flags); - - udelay(5); - - iwl4965_hw_nic_reset(priv); - - /* Bring the device back up */ - clear_bit(STATUS_IN_SUSPEND, &priv->status); - queue_work(priv->workqueue, &priv->up); -} - static int iwl4965_pci_resume(struct pci_dev *pdev) { struct iwl4965_priv *priv = pci_get_drvdata(pdev); - int err; - - printk(KERN_INFO "Coming out of suspend...\n"); pci_set_power_state(pdev, PCI_D0); - err = pci_enable_device(pdev); - pci_restore_state(pdev); - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries - * from interfering with C3 CPU state. pci_restore_state won't help - * here since it only restores the first 64 bytes pci config header. - */ - pci_write_config_byte(pdev, 0x41, 0x00); - - iwl4965_resume(priv); + if (priv->is_open) + iwl4965_mac_start(priv->hw); + clear_bit(STATUS_IN_SUSPEND, &priv->status); return 0; } |