drivers/net: Kconfig and Makefile cleanup

After the move of the Ethernet drivers into drivers/net/ethernet/
there was some leftover cleanup to do in the Kconfig and Makefile.

Removed the 10/100, 1000, and 10GbE Kconfig menus.

Removed the out-dated pci-skeleton.c file which was used an
example driver.  With the current networking features and
structure, the file is no longer a good example to use for
driver creation.

CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

4 files changed, 6 insertions, 2043 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3a1fd2c716c3..31d87929c1ad 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -192,122 +192,6 @@ source "drivers/net/phy/Kconfig"
 
 source "drivers/net/ethernet/Kconfig"
 
-menuconfig NET_ETHERNET
-	bool "Ethernet (10 or 100Mbit)"
-	depends on !UML
-	---help---
-	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
-	  type of Local Area Network (LAN) in universities and companies.
-
-	  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
-	  coaxial cable, linking computers in a chain), 10BASE-T or twisted
-	  pair (10 Mbps over twisted pair cable, linking computers to central
-	  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
-	  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
-	  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
-	  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
-	  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
-	  Ethernet (1 Gbps over optical fiber or short copper links).
-
-	  If your Linux machine will be connected to an Ethernet and you have
-	  an Ethernet network interface card (NIC) installed in your computer,
-	  say Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. You will then also have
-	  to say Y to the driver for your particular NIC.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about Ethernet network cards. If unsure, say N.
-
-if NET_ETHERNET
-
-config NET_PCI
-	bool "EISA, VLB, PCI and on board controllers"
-	depends on ISA || EISA || PCI
-	help
-	  This is another class of network cards which attach directly to the
-	  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about this class of network cards. If you say Y, you
-	  will be asked for your specific card in the following questions. If
-	  you are unsure, say Y.
-
-config NET_POCKET
-	bool "Pocket and portable adapters"
-	depends on PARPORT
-	---help---
-	  Cute little network (Ethernet) devices which attach to the parallel
-	  port ("pocket adapters"), commonly used with laptops. If you have
-	  one of those, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  If you want to plug a network (or some other) card into the PCMCIA
-	  (or PC-card) slot of your laptop instead (PCMCIA is the standard for
-	  credit card size extension cards used by all modern laptops), you
-	  need the pcmcia-cs package (location contained in the file
-	  <file:Documentation/Changes>) and you can say N here.
-
-	  Laptop users should read the Linux Laptop home page at
-	  <http://www.linux-on-laptops.com/> or
-	  Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about this class of network devices. If you say Y, you
-	  will be asked for your specific device in the following questions.
-
-endif # NET_ETHERNET
-
-#
-#	Gigabit Ethernet
-#
-
-menuconfig NETDEV_1000
-	bool "Ethernet (1000 Mbit)"
-	depends on !UML
-	default y
-	---help---
-	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
-	  type of Local Area Network (LAN) in universities and companies.
-
-	  Say Y here to get to see options for Gigabit Ethernet drivers.
-	  This option alone does not add any kernel code.
-	  Note that drivers supporting both 100 and 1000 MBit may be listed
-	  under "Ethernet (10 or 100MBit)" instead.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_1000
-
-endif # NETDEV_1000
-
-#
-#	10 Gigabit Ethernet
-#
-
-menuconfig NETDEV_10000
-	bool "Ethernet (10000 Mbit)"
-	depends on !UML
-	default y
-	---help---
-	  Say Y here to get to see options for 10 Gigabit Ethernet drivers.
-	  This option alone does not add any kernel code.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_10000
-
-config MDIO
-	tristate
-
-config SUNGEM_PHY
-	tristate
-
-endif # NETDEV_10000
-
 source "drivers/net/tokenring/Kconfig"
 
 source "drivers/net/wireless/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fcc62e603a28..9cb47bb3a816 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,9 +13,7 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
 # link order important here
 #
 obj-$(CONFIG_PLIP) += plip.o
-
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
-
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_RIONET) += rionet.o
 
@@ -25,7 +23,6 @@ obj-$(CONFIG_RIONET) += rionet.o
 
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
-
 obj-$(CONFIG_PPP) += ppp_generic.o
 obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
 obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
@@ -35,7 +32,6 @@ obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
 obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
 obj-$(CONFIG_PPPOL2TP) += pppox.o
 obj-$(CONFIG_PPTP) += pppox.o pptp.o
-
 obj-$(CONFIG_SLIP) += slip.o
 obj-$(CONFIG_SLHC) += slhc.o
 
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 1f5a32dbe04c..1f647471e651 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -11,6 +11,12 @@ menuconfig ETHERNET
 
 if ETHERNET
 
+config MDIO
+	tristate
+
+config SUNGEM_PHY
+	tristate
+
 source "drivers/net/ethernet/3com/Kconfig"
 source "drivers/net/ethernet/adaptec/Kconfig"
 source "drivers/net/ethernet/aeroflex/Kconfig"
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
deleted file mode 100644
index c0f23376a462..000000000000
--- a/drivers/net/pci-skeleton.c
+++ /dev/null
@@ -1,1923 +0,0 @@
-/*
-
-	drivers/net/pci-skeleton.c
-
-	Maintained by Jeff Garzik <jgarzik@pobox.com>
-
-	Original code came from 8139too.c, which in turns was based
-	originally on Donald Becker's rtl8139.c driver, versions 1.11
-	and older.  This driver was originally based on rtl8139.c
-	version 1.07.  Header of rtl8139.c version 1.11:
-
-	-----<snip>-----
-
-		Written 1997-2000 by Donald Becker.
-		This software may be used and distributed according to the
-		terms of the GNU General Public License (GPL), incorporated
-		herein by reference.  Drivers based on or derived from this
-		code fall under the GPL and must retain the authorship,
-		copyright and license notice.  This file is not a complete
-		program and may only be used when the entire operating
-		system is licensed under the GPL.
-
-		This driver is for boards based on the RTL8129 and RTL8139
-		PCI ethernet chips.
-
-		The author may be reached as becker@scyld.com, or C/O Scyld
-		Computing Corporation 410 Severn Ave., Suite 210 Annapolis
-		MD 21403
-
-		Support and updates available at
-		http://www.scyld.com/network/rtl8139.html
-
-		Twister-tuning table provided by Kinston
-		<shangh@realtek.com.tw>.
-
-	-----<snip>-----
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-
------------------------------------------------------------------------------
-
-				Theory of Operation
-
-I. Board Compatibility
-
-This device driver is designed for the RealTek RTL8139 series, the RealTek
-Fast Ethernet controllers for PCI and CardBus.  This chip is used on many
-low-end boards, sometimes with its markings changed.
-
-
-II. Board-specific settings
-
-PCI bus devices are configured by the system at boot time, so no jumpers
-need to be set on the board.  The system BIOS will assign the
-PCI INTA signal to a (preferably otherwise unused) system IRQ line.
-
-III. Driver operation
-
-IIIa. Rx Ring buffers
-
-The receive unit uses a single linear ring buffer rather than the more
-common (and more efficient) descriptor-based architecture.  Incoming frames
-are sequentially stored into the Rx region, and the host copies them into
-skbuffs.
-
-Comment: While it is theoretically possible to process many frames in place,
-any delay in Rx processing would cause us to drop frames.  More importantly,
-the Linux protocol stack is not designed to operate in this manner.
-
-IIIb. Tx operation
-
-The RTL8139 uses a fixed set of four Tx descriptors in register space.
-In a stunningly bad design choice, Tx frames must be 32 bit aligned.  Linux
-aligns the IP header on word boundaries, and 14 byte ethernet header means
-that almost all frames will need to be copied to an alignment buffer.
-
-IVb. References
-
-http://www.realtek.com.tw/
-http://www.scyld.com/expert/NWay.html
-
-IVc. Errata
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/crc32.h>
-#include <linux/io.h>
-
-#define NETDRV_VERSION		"1.0.1"
-#define MODNAME			"netdrv"
-#define NETDRV_DRIVER_LOAD_MSG	"MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded"
-
-static char version[] __devinitdata =
-	KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-	"  Support available from http://foo.com/bar/baz.html\n";
-
-/* define to 1 to enable PIO instead of MMIO */
-#undef USE_IO_OPS
-
-/* define to 1 to enable copious debugging info */
-#undef NETDRV_DEBUG
-
-/* define to 1 to disable lightweight runtime debugging checks */
-#undef NETDRV_NDEBUG
-
-
-#ifdef NETDRV_DEBUG
-/* note: prints function name for you */
-#define DPRINTK(fmt, args...)					\
-	printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
-#else
-#define DPRINTK(fmt, args...)				\
-do {							\
-	if (0)						\
-		printk(KERN_DEBUG fmt, ##args);		\
-} while (0)
-#endif
-
-#ifdef NETDRV_NDEBUG
-#define assert(expr) do {} while (0)
-#else
-#define assert(expr)						\
-	if (!(expr)) {						\
-		printk("Assertion failed! %s,%s,%s,line=%d\n",	\
-		       #expr, __FILE__, __func__, __LINE__);	\
-	}
-#endif
-
-
-/* A few user-configurable values. */
-/* media options */
-static int media[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
-
-/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
-   The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
-static int multicast_filter_limit = 32;
-
-/* Size of the in-memory receive ring. */
-#define RX_BUF_LEN_IDX	2	/* 0==8K, 1==16K, 2==32K, 3==64K */
-#define RX_BUF_LEN	(8192 << RX_BUF_LEN_IDX)
-#define RX_BUF_PAD	16
-#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
-#define RX_BUF_TOT_LEN	(RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
-
-/* Number of Tx descriptor registers. */
-#define NUM_TX_DESC	4
-
-/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
-#define MAX_ETH_FRAME_SIZE	1536
-
-/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
-#define TX_BUF_SIZE	MAX_ETH_FRAME_SIZE
-#define TX_BUF_TOT_LEN	(TX_BUF_SIZE * NUM_TX_DESC)
-
-/* PCI Tuning Parameters
-   Threshold is bytes transferred to chip before transmission starts. */
-#define TX_FIFO_THRESH	256	/* In bytes, rounded down to 32 byte units. */
-
-/* The following settings are log_2(bytes)-4:
-   0==16 bytes 1==32 2==64 3==128 4==256 5==512 6==1024 7==end of packet.
-*/
-#define RX_FIFO_THRESH	6	/* Rx buffer level before first PCI xfer.  */
-#define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
-#define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
-
-
-/* Operational parameters that usually are not changed. */
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT	(6 * HZ)
-
-enum {
-	HAS_CHIP_XCVR = 0x020000,
-	HAS_LNK_CHNG = 0x040000,
-};
-
-#define NETDRV_MIN_IO_SIZE 0x80
-#define RTL8139B_IO_SIZE 256
-
-#define NETDRV_CAPS	(HAS_CHIP_XCVR | HAS_LNK_CHNG)
-
-typedef enum {
-	RTL8139 = 0,
-	NETDRV_CB,
-	SMC1211TX,
-	/*MPX5030,*/
-	DELTA8139,
-	ADDTRON8139,
-} board_t;
-
-
-/* indexed by board_t, above */
-static struct {
-	const char *name;
-} board_info[] __devinitdata = {
-	{ "RealTek RTL8139 Fast Ethernet" },
-	{ "RealTek RTL8139B PCI/CardBus" },
-	{ "SMC1211TX EZCard 10/100 (RealTek RTL8139)" },
-/*	{ MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/
-	{ "Delta Electronics 8139 10/100BaseTX" },
-	{ "Addtron Technology 8139 10/100BaseTX" },
-};
-
-
-static DEFINE_PCI_DEVICE_TABLE(netdrv_pci_tbl) = {
-	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
-	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB },
-	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX },
-/*	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MPX5030 },*/
-	{0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DELTA8139 },
-	{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 },
-	{0,}
-};
-MODULE_DEVICE_TABLE(pci, netdrv_pci_tbl);
-
-
-/* The rest of these values should never change. */
-
-/* Symbolic offsets to registers. */
-enum NETDRV_registers {
-	MAC0 = 0,		/* Ethernet hardware address. */
-	MAR0 = 8,		/* Multicast filter. */
-	TxStatus0 = 0x10,	/* Transmit status (Four 32bit registers). */
-	TxAddr0 = 0x20,		/* Tx descriptors (also four 32bit). */
-	RxBuf = 0x30,
-	RxEarlyCnt = 0x34,
-	RxEarlyStatus = 0x36,
-	ChipCmd = 0x37,
-	RxBufPtr = 0x38,
-	RxBufAddr = 0x3A,
-	IntrMask = 0x3C,
-	IntrStatus = 0x3E,
-	TxConfig = 0x40,
-	ChipVersion = 0x43,
-	RxConfig = 0x44,
-	Timer = 0x48,		/* A general-purpose counter. */
-	RxMissed = 0x4C,	/* 24 bits valid, write clears. */
-	Cfg9346 = 0x50,
-	Config0 = 0x51,
-	Config1 = 0x52,
-	FlashReg = 0x54,
-	MediaStatus = 0x58,
-	Config3 = 0x59,
-	Config4 = 0x5A,		/* absent on RTL-8139A */
-	HltClk = 0x5B,
-	MultiIntr = 0x5C,
-	TxSummary = 0x60,
-	BasicModeCtrl = 0x62,
-	BasicModeStatus = 0x64,
-	NWayAdvert = 0x66,
-	NWayLPAR = 0x68,
-	NWayExpansion = 0x6A,
-	/* Undocumented registers, but required for proper operation. */
-	FIFOTMS = 0x70,		/* FIFO Control and test. */
-	CSCR = 0x74,		/* Chip Status and Configuration Register. */
-	PARA78 = 0x78,
-	PARA7c = 0x7c,		/* Magic transceiver parameter register. */
-	Config5 = 0xD8,		/* absent on RTL-8139A */
-};
-
-enum ClearBitMasks {
-	MultiIntrClear = 0xF000,
-	ChipCmdClear = 0xE2,
-	Config1Clear = (1 << 7) | (1 << 6) | (1 << 3) | (1 << 2) | (1 << 1),
-};
-
-enum ChipCmdBits {
-	CmdReset = 0x10,
-	CmdRxEnb = 0x08,
-	CmdTxEnb = 0x04,
-	RxBufEmpty = 0x01,
-};
-
-/* Interrupt register bits, using my own meaningful names. */
-enum IntrStatusBits {
-	PCIErr = 0x8000,
-	PCSTimeout = 0x4000,
-	RxFIFOOver = 0x40,
-	RxUnderrun = 0x20,
-	RxOverflow = 0x10,
-	TxErr = 0x08,
-	TxOK = 0x04,
-	RxErr = 0x02,
-	RxOK = 0x01,
-};
-enum TxStatusBits {
-	TxHostOwns = 0x2000,
-	TxUnderrun = 0x4000,
-	TxStatOK = 0x8000,
-	TxOutOfWindow = 0x20000000,
-	TxAborted = 0x40000000,
-	TxCarrierLost = 0x80000000,
-};
-enum RxStatusBits {
-	RxMulticast = 0x8000,
-	RxPhysical = 0x4000,
-	RxBroadcast = 0x2000,
-	RxBadSymbol = 0x0020,
-	RxRunt = 0x0010,
-	RxTooLong = 0x0008,
-	RxCRCErr = 0x0004,
-	RxBadAlign = 0x0002,
-	RxStatusOK = 0x0001,
-};
-
-/* Bits in RxConfig. */
-enum rx_mode_bits {
-	AcceptErr = 0x20,
-	AcceptRunt = 0x10,
-	AcceptBroadcast = 0x08,
-	AcceptMulticast = 0x04,
-	AcceptMyPhys = 0x02,
-	AcceptAllPhys = 0x01,
-};
-
-/* Bits in TxConfig. */
-enum tx_config_bits {
-	TxIFG1 = (1 << 25),	/* Interframe Gap Time */
-	TxIFG0 = (1 << 24),	/* Enabling these bits violates IEEE 802.3 */
-	TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
-	TxCRC = (1 << 16),	/* DISABLE appending CRC to end of Tx packets */
-	TxClearAbt = (1 << 0),	/* Clear abort (WO) */
-	TxDMAShift = 8,		/* DMA burst value(0-7) is shift this many bits */
-
-	TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
-};
-
-/* Bits in Config1 */
-enum Config1Bits {
-	Cfg1_PM_Enable = 0x01,
-	Cfg1_VPD_Enable = 0x02,
-	Cfg1_PIO = 0x04,
-	Cfg1_MMIO = 0x08,
-	Cfg1_LWAKE = 0x10,
-	Cfg1_Driver_Load = 0x20,
-	Cfg1_LED0 = 0x40,
-	Cfg1_LED1 = 0x80,
-};
-
-enum RxConfigBits {
-	/* Early Rx threshold, none or X/16 */
-	RxCfgEarlyRxNone = 0,
-	RxCfgEarlyRxShift = 24,
-
-	/* rx fifo threshold */
-	RxCfgFIFOShift = 13,
-	RxCfgFIFONone = (7 << RxCfgFIFOShift),
-
-	/* Max DMA burst */
-	RxCfgDMAShift = 8,
-	RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
-
-	/* rx ring buffer length */
-	RxCfgRcv8K = 0,
-	RxCfgRcv16K = (1 << 11),
-	RxCfgRcv32K = (1 << 12),
-	RxCfgRcv64K = (1 << 11) | (1 << 12),
-
-	/* Disable packet wrap at end of Rx buffer */
-	RxNoWrap = (1 << 7),
-};
-
-
-/* Twister tuning parameters from RealTek.
-   Completely undocumented, but required to tune bad links. */
-enum CSCRBits {
-	CSCR_LinkOKBit = 0x0400,
-	CSCR_LinkChangeBit = 0x0800,
-	CSCR_LinkStatusBits = 0x0f000,
-	CSCR_LinkDownOffCmd = 0x003c0,
-	CSCR_LinkDownCmd = 0x0f3c0,
-};
-
-
-enum Cfg9346Bits {
-	Cfg9346_Lock = 0x00,
-	Cfg9346_Unlock = 0xC0,
-};
-
-
-#define PARA78_default	0x78fa8388
-#define PARA7c_default	0xcb38de43	/* param[0][3] */
-#define PARA7c_xxx		0xcb38de43
-static const unsigned long param[4][4] = {
-	{0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
-	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
-	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
-	{0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
-};
-
-struct ring_info {
-	struct sk_buff *skb;
-	dma_addr_t mapping;
-};
-
-
-typedef enum {
-	CH_8139 = 0,
-	CH_8139_K,
-	CH_8139A,
-	CH_8139B,
-	CH_8130,
-	CH_8139C,
-} chip_t;
-
-
-/* directly indexed by chip_t, above */
-static const struct {
-	const char *name;
-	u8 version; /* from RTL8139C docs */
-	u32 RxConfigMask; /* should clear the bits supported by this chip */
-} rtl_chip_info[] = {
-	{ "RTL-8139",
-	  0x40,
-	  0xf0fe0040, /* XXX copied from RTL8139A, verify */
-	},
-
-	{ "RTL-8139 rev K",
-	  0x60,
-	  0xf0fe0040,
-	},
-
-	{ "RTL-8139A",
-	  0x70,
-	  0xf0fe0040,
-	},
-
-	{ "RTL-8139B",
-	  0x78,
-	  0xf0fc0040
-	},
-
-	{ "RTL-8130",
-	  0x7C,
-	  0xf0fe0040, /* XXX copied from RTL8139A, verify */
-	},
-
-	{ "RTL-8139C",
-	  0x74,
-	  0xf0fc0040, /* XXX copied from RTL8139B, verify */
-	},
-
-};
-
-
-struct netdrv_private {
-	board_t board;
-	void *mmio_addr;
-	int drv_flags;
-	struct pci_dev *pci_dev;
-	struct timer_list timer;	/* Media selection timer. */
-	unsigned char *rx_ring;
-	unsigned int cur_rx;	/* Index into the Rx buffer of next Rx pkt. */
-	unsigned int tx_flag;
-	atomic_t cur_tx;
-	atomic_t dirty_tx;
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct ring_info tx_info[NUM_TX_DESC];
-	unsigned char *tx_buf[NUM_TX_DESC];	/* Tx bounce buffers */
-	unsigned char *tx_bufs;	/* Tx bounce buffer region. */
-	dma_addr_t rx_ring_dma;
-	dma_addr_t tx_bufs_dma;
-	char phys[4];		/* MII device addresses. */
-	char twistie, twist_row, twist_col;	/* Twister tune state. */
-	unsigned int full_duplex:1;	/* Full-duplex operation requested. */
-	unsigned int duplex_lock:1;
-	unsigned int default_port:4;	/* Last dev->if_port value. */
-	unsigned int media2:4;	/* Secondary monitored media port. */
-	unsigned int medialock:1;	/* Don't sense media type. */
-	unsigned int mediasense:1;	/* Media sensing in progress. */
-	spinlock_t lock;
-	chip_t chipset;
-};
-
-MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION("Skeleton for a PCI Fast Ethernet driver");
-MODULE_LICENSE("GPL");
-module_param(multicast_filter_limit, int, 0);
-module_param(max_interrupt_work, int, 0);
-module_param_array(media, int, NULL, 0);
-MODULE_PARM_DESC(multicast_filter_limit,
-		 MODNAME " maximum number of filtered multicast addresses");
-MODULE_PARM_DESC(max_interrupt_work,
-		 MODNAME " maximum events handled per interrupt");
-MODULE_PARM_DESC(media,
-		 MODNAME " Bits 0-3: media type, bit 17: full duplex");
-
-static int read_eeprom(void *ioaddr, int location, int addr_len);
-static int netdrv_open(struct net_device *dev);
-static int mdio_read(struct net_device *dev, int phy_id, int location);
-static void mdio_write(struct net_device *dev, int phy_id, int location,
-		       int val);
-static void netdrv_timer(unsigned long data);
-static void netdrv_tx_timeout(struct net_device *dev);
-static void netdrv_init_ring(struct net_device *dev);
-static int netdrv_start_xmit(struct sk_buff *skb,
-			     struct net_device *dev);
-static irqreturn_t netdrv_interrupt(int irq, void *dev_instance);
-static int netdrv_close(struct net_device *dev);
-static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void netdrv_set_rx_mode(struct net_device *dev);
-static void netdrv_hw_start(struct net_device *dev);
-
-
-#ifdef USE_IO_OPS
-
-#define NETDRV_R8(reg)		inb(((unsigned long)ioaddr) + (reg))
-#define NETDRV_R16(reg)		inw(((unsigned long)ioaddr) + (reg))
-#define NETDRV_R32(reg)		((unsigned long)inl(((unsigned long)ioaddr) + (reg)))
-#define NETDRV_W8(reg, val8)	outb((val8), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W16(reg, val16)	outw((val16), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W32(reg, val32)	outl((val32), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W8_F		NETDRV_W8
-#define NETDRV_W16_F		NETDRV_W16
-#define NETDRV_W32_F		NETDRV_W32
-#undef readb
-#undef readw
-#undef readl
-#undef writeb
-#undef writew
-#undef writel
-#define readb(addr) inb((unsigned long)(addr))
-#define readw(addr) inw((unsigned long)(addr))
-#define readl(addr) inl((unsigned long)(addr))
-#define writeb(val, addr) outb((val), (unsigned long)(addr))
-#define writew(val, addr) outw((val), (unsigned long)(addr))
-#define writel(val, addr) outl((val), (unsigned long)(addr))
-
-#else
-
-/* write MMIO register, with flush */
-/* Flush avoids rtl8139 bug w/ posted MMIO writes */
-#define NETDRV_W8_F(reg, val8)			\
-do {						\
-	writeb((val8), ioaddr + (reg));		\
-	readb(ioaddr + (reg));			\
-} while (0)
-#define NETDRV_W16_F(reg, val16)		\
-do {						\
-	writew((val16), ioaddr + (reg));	\
-	readw(ioaddr + (reg));			\
-} while (0)
-#define NETDRV_W32_F(reg, val32)		\
-do {						\
-	writel((val32), ioaddr + (reg));	\
-	readl(ioaddr + (reg));			\
-} while (0)
-
-
-#ifdef MMIO_FLUSH_AUDIT_COMPLETE
-
-/* write MMIO register */
-#define NETDRV_W8(reg, val8)	writeb((val8), ioaddr + (reg))
-#define NETDRV_W16(reg, val16)	writew((val16), ioaddr + (reg))
-#define NETDRV_W32(reg, val32)	writel((val32), ioaddr + (reg))
-
-#else
-
-/* write MMIO register, then flush */
-#define NETDRV_W8		NETDRV_W8_F
-#define NETDRV_W16		NETDRV_W16_F
-#define NETDRV_W32		NETDRV_W32_F
-
-#endif /* MMIO_FLUSH_AUDIT_COMPLETE */
-
-/* read MMIO register */
-#define NETDRV_R8(reg)		readb(ioaddr + (reg))
-#define NETDRV_R16(reg)		readw(ioaddr + (reg))
-#define NETDRV_R32(reg)		((unsigned long) readl(ioaddr + (reg)))
-
-#endif /* USE_IO_OPS */
-
-
-static const u16 netdrv_intr_mask =
-	PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
-	TxErr | TxOK | RxErr | RxOK;
-
-static const unsigned int netdrv_rx_config =
-	RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
-	(RX_FIFO_THRESH << RxCfgFIFOShift) |
-	(RX_DMA_BURST << RxCfgDMAShift);
-
-
-static int __devinit netdrv_init_board(struct pci_dev *pdev,
-				       struct net_device **dev_out,
-				       void **ioaddr_out)
-{
-	void *ioaddr = NULL;
-	struct net_device *dev;
-	struct netdrv_private *tp;
-	int rc, i;
-	u32 pio_start, pio_end, pio_flags, pio_len;
-	unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
-	u32 tmp;
-
-	DPRINTK("ENTER\n");
-
-	assert(pdev != NULL);
-	assert(ioaddr_out != NULL);
-
-	*ioaddr_out = NULL;
-	*dev_out = NULL;
-
-	/* dev zeroed in alloc_etherdev */
-	dev = alloc_etherdev(sizeof(*tp));
-	if (dev == NULL) {
-		dev_err(&pdev->dev, "unable to alloc new ethernet\n");
-		DPRINTK("EXIT, returning -ENOMEM\n");
-		return -ENOMEM;
-	}
-	SET_NETDEV_DEV(dev, &pdev->dev);
-	tp = netdev_priv(dev);
-
-	/* enable device(incl. PCI PM wakeup), and bus-mastering */
-	rc = pci_enable_device(pdev);
-	if (rc)
-		goto err_out;
-
-	pio_start = pci_resource_start(pdev, 0);
-	pio_end = pci_resource_end(pdev, 0);
-	pio_flags = pci_resource_flags(pdev, 0);
-	pio_len = pci_resource_len(pdev, 0);
-
-	mmio_start = pci_resource_start(pdev, 1);
-	mmio_end = pci_resource_end(pdev, 1);
-	mmio_flags = pci_resource_flags(pdev, 1);
-	mmio_len = pci_resource_len(pdev, 1);
-
-	/* set this immediately, we need to know before
-	 * we talk to the chip directly */
-	DPRINTK("PIO region size == %#02X\n", pio_len);
-	DPRINTK("MMIO region size == %#02lX\n", mmio_len);
-
-	/* make sure PCI base addr 0 is PIO */
-	if (!(pio_flags & IORESOURCE_IO)) {
-		dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-
-	/* make sure PCI base addr 1 is MMIO */
-	if (!(mmio_flags & IORESOURCE_MEM)) {
-		dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-
-	/* check for weird/broken PCI region reporting */
-	if ((pio_len < NETDRV_MIN_IO_SIZE) ||
-	    (mmio_len < NETDRV_MIN_IO_SIZE)) {
-		dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-
-	rc = pci_request_regions(pdev, MODNAME);
-	if (rc)
-		goto err_out;
-
-	pci_set_master(pdev);
-
-#ifdef USE_IO_OPS
-	ioaddr = (void *)pio_start;
-#else
-	/* ioremap MMIO region */
-	ioaddr = ioremap(mmio_start, mmio_len);
-	if (ioaddr == NULL) {
-		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
-		rc = -EIO;
-		goto err_out_free_res;
-	}
-#endif /* USE_IO_OPS */
-
-	/* Soft reset the chip. */
-	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
-
-	/* Check that the chip has finished the reset. */
-	for (i = 1000; i > 0; i--)
-		if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
-			break;
-		else
-			udelay(10);
-
-	/* Bring the chip out of low-power mode. */
-	/* <insert device-specific code here> */
-
-#ifndef USE_IO_OPS
-	/* sanity checks -- ensure PIO and MMIO registers agree */
-	assert(inb(pio_start+Config0) == readb(ioaddr+Config0));
-	assert(inb(pio_start+Config1) == readb(ioaddr+Config1));
-	assert(inb(pio_start+TxConfig) == readb(ioaddr+TxConfig));
-	assert(inb(pio_start+RxConfig) == readb(ioaddr+RxConfig));
-#endif /* !USE_IO_OPS */
-
-	/* identify chip attached to board */
-	tmp = NETDRV_R8(ChipVersion);
-	for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--)
-		if (tmp == rtl_chip_info[i].version) {
-			tp->chipset = i;
-			goto match;
-		}
-
-	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		   "unknown chip version, assuming RTL-8139\n");
-	dev_printk(KERN_DEBUG, &pdev->dev, "TxConfig = %#lx\n",
-		   NETDRV_R32(TxConfig));
-	tp->chipset = 0;
-
-match:
-	DPRINTK("chipset id(%d) == index %d, '%s'\n",
-		tmp, tp->chipset, rtl_chip_info[tp->chipset].name);
-
-	rc = register_netdev(dev);
-	if (rc)
-		goto err_out_unmap;
-
-	DPRINTK("EXIT, returning 0\n");
-	*ioaddr_out = ioaddr;
-	*dev_out = dev;
-	return 0;
-
-err_out_unmap:
-#ifndef USE_IO_OPS
-	iounmap(ioaddr);
-err_out_free_res:
-#endif
-	pci_release_regions(pdev);
-err_out:
-	free_netdev(dev);
-	DPRINTK("EXIT, returning %d\n", rc);
-	return rc;
-}
-
-static const struct net_device_ops netdrv_netdev_ops = {
-	.ndo_open		= netdrv_open,
-	.ndo_stop		= netdrv_close,
-	.ndo_start_xmit		= netdrv_start_xmit,
-	.ndo_set_multicast_list	= netdrv_set_rx_mode,
-	.ndo_do_ioctl		= netdrv_ioctl,
-	.ndo_tx_timeout		= netdrv_tx_timeout,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-};
-
-static int __devinit netdrv_init_one(struct pci_dev *pdev,
-				     const struct pci_device_id *ent)
-{
-	struct net_device *dev = NULL;
-	struct netdrv_private *tp;
-	int i, addr_len, option;
-	void *ioaddr = NULL;
-	static int board_idx = -1;
-
-/* when built into the kernel, we only print version if device is found */
-#ifndef MODULE
-	static int printed_version;
-	if (!printed_version++)
-		printk(version);
-#endif
-
-	DPRINTK("ENTER\n");
-
-	assert(pdev != NULL);
-	assert(ent != NULL);
-
-	board_idx++;
-
-	i = netdrv_init_board(pdev, &dev, &ioaddr);
-	if (i < 0) {
-		DPRINTK("EXIT, returning %d\n", i);
-		return i;
-	}
-
-	tp = netdev_priv(dev);
-
-	assert(ioaddr != NULL);
-	assert(dev != NULL);
-	assert(tp != NULL);
-
-	addr_len = read_eeprom(ioaddr, 0, 8) == 0x8129 ? 8 : 6;
-	for (i = 0; i < 3; i++)
-		((u16 *)(dev->dev_addr))[i] =
-			le16_to_cpu(read_eeprom(ioaddr, i + 7, addr_len));
-
-	dev->netdev_ops = &netdrv_netdev_ops;
-	dev->watchdog_timeo = TX_TIMEOUT;
-
-	dev->irq = pdev->irq;
-	dev->base_addr = (unsigned long) ioaddr;
-
-	/* netdev_priv()/tp zeroed and aligned in alloc_etherdev */
-	tp = netdev_priv(dev);
-
-	/* note: tp->chipset set in netdrv_init_board */
-	tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-		PCI_COMMAND_MASTER | NETDRV_CAPS;
-	tp->pci_dev = pdev;
-	tp->board = ent->driver_data;
-	tp->mmio_addr = ioaddr;
-	spin_lock_init(&tp->lock);
-
-	pci_set_drvdata(pdev, dev);
-
-	tp->phys[0] = 32;
-
-	netdev_info(dev, "%s at %#lx, %pM IRQ %d\n",
-		    board_info[ent->driver_data].name,
-		    dev->base_addr, dev->dev_addr, dev->irq);
-
-	netdev_printk(KERN_DEBUG, dev, "Identified 8139 chip type '%s'\n",
-		      rtl_chip_info[tp->chipset].name);
-
-	/* Put the chip into low-power mode. */
-	NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
-
-	/* The lower four bits are the media type. */
-	option = (board_idx > 7) ? 0 : media[board_idx];
-	if (option > 0) {
-		tp->full_duplex = (option & 0x200) ? 1 : 0;
-		tp->default_port = option & 15;
-		if (tp->default_port)
-			tp->medialock = 1;
-	}
-
-	if (tp->full_duplex) {
-		netdev_info(dev, "Media type forced to Full Duplex\n");
-		mdio_write(dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
-		tp->duplex_lock = 1;
-	}
-
-	DPRINTK("EXIT - returning 0\n");
-	return 0;
-}
-
-
-static void __devexit netdrv_remove_one(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct netdrv_private *np;
-
-	DPRINTK("ENTER\n");
-
-	assert(dev != NULL);
-
-	np = netdev_priv(dev);
-	assert(np != NULL);
-
-	unregister_netdev(dev);
-
-#ifndef USE_IO_OPS
-	iounmap(np->mmio_addr);
-#endif /* !USE_IO_OPS */
-
-	pci_release_regions(pdev);
-
-	free_netdev(dev);
-
-	pci_set_drvdata(pdev, NULL);
-
-	pci_disable_device(pdev);
-
-	DPRINTK("EXIT\n");
-}
-
-
-/* Serial EEPROM section. */
-
-/*  EEPROM_Ctrl bits. */
-#define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
-#define EE_CS		0x08	/* EEPROM chip select. */
-#define EE_DATA_WRITE	0x02	/* EEPROM chip data in. */
-#define EE_WRITE_0	0x00
-#define EE_WRITE_1	0x02
-#define EE_DATA_READ	0x01	/* EEPROM chip data out. */
-#define EE_ENB		(0x80 | EE_CS)
-
-/* Delay between EEPROM clock transitions.
-   No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
-*/
-
-#define eeprom_delay()	readl(ee_addr)
-
-/* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD	(5)
-#define EE_READ_CMD	(6)
-#define EE_ERASE_CMD	(7)
-
-static int __devinit read_eeprom(void *ioaddr, int location, int addr_len)
-{
-	int i;
-	unsigned retval = 0;
-	void *ee_addr = ioaddr + Cfg9346;
-	int read_cmd = location | (EE_READ_CMD << addr_len);
-
-	DPRINTK("ENTER\n");
-
-	writeb(EE_ENB & ~EE_CS, ee_addr);
-	writeb(EE_ENB, ee_addr);
-	eeprom_delay();
-
-	/* Shift the read command bits out. */
-	for (i = 4 + addr_len; i >= 0; i--) {
-		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
-		writeb(EE_ENB | dataval, ee_addr);
-		eeprom_delay();
-		writeb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
-		eeprom_delay();
-	}
-	writeb(EE_ENB, ee_addr);
-	eeprom_delay();
-
-	for (i = 16; i > 0; i--) {
-		writeb(EE_ENB | EE_SHIFT_CLK, ee_addr);
-		eeprom_delay();
-		retval =
-			(retval << 1) | ((readb(ee_addr) & EE_DATA_READ) ? 1 :
-					0);
-		writeb(EE_ENB, ee_addr);
-		eeprom_delay();
-	}
-
-	/* Terminate the EEPROM access. */
-	writeb(~EE_CS, ee_addr);
-	eeprom_delay();
-
-	DPRINTK("EXIT - returning %d\n", retval);
-	return retval;
-}
-
-/* MII serial management: mostly bogus for now. */
-/* Read and write the MII management registers using software-generated
-   serial MDIO protocol.
-   The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
-   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
-   "overclocking" issues. */
-#define MDIO_DIR	0x80
-#define MDIO_DATA_OUT	0x04
-#define MDIO_DATA_IN	0x02
-#define MDIO_CLK	0x01
-#define MDIO_WRITE0	(MDIO_DIR)
-#define MDIO_WRITE1	(MDIO_DIR | MDIO_DATA_OUT)
-
-#define mdio_delay()	readb(mdio_addr)
-
-
-static char mii_2_8139_map[8] = {
-	BasicModeCtrl,
-	BasicModeStatus,
-	0,
-	0,
-	NWayAdvert,
-	NWayLPAR,
-	NWayExpansion,
-	0
-};
-
-
-/* Syncronize the MII management interface by shifting 32 one bits out. */
-static void mdio_sync(void *mdio_addr)
-{
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	for (i = 32; i >= 0; i--) {
-		writeb(MDIO_WRITE1, mdio_addr);
-		mdio_delay();
-		writeb(MDIO_WRITE1 | MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	DPRINTK("EXIT\n");
-}
-
-
-static int mdio_read(struct net_device *dev, int phy_id, int location)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *mdio_addr = tp->mmio_addr + Config4;
-	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
-	int retval = 0;
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
-		DPRINTK("EXIT after directly using 8139 internal regs\n");
-		return location < 8 && mii_2_8139_map[location] ?
-			readw(tp->mmio_addr + mii_2_8139_map[location]) : 0;
-	}
-	mdio_sync(mdio_addr);
-	/* Shift the read command bits out. */
-	for (i = 15; i >= 0; i--) {
-		int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
-
-		writeb(MDIO_DIR | dataval, mdio_addr);
-		mdio_delay();
-		writeb(MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	/* Read the two transition, 16 data, and wire-idle bits. */
-	for (i = 19; i > 0; i--) {
-		writeb(0, mdio_addr);
-		mdio_delay();
-		retval = ((retval << 1) | ((readb(mdio_addr) & MDIO_DATA_IN))
-			  ? 1 : 0);
-		writeb(MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	DPRINTK("EXIT, returning %d\n", (retval >> 1) & 0xffff);
-	return (retval >> 1) & 0xffff;
-}
-
-
-static void mdio_write(struct net_device *dev, int phy_id, int location,
-		       int value)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *mdio_addr = tp->mmio_addr + Config4;
-	int mii_cmd =
-		(0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
-		if (location < 8 && mii_2_8139_map[location]) {
-			writew(value,
-			       tp->mmio_addr + mii_2_8139_map[location]);
-			readw(tp->mmio_addr + mii_2_8139_map[location]);
-		}
-		DPRINTK("EXIT after directly using 8139 internal regs\n");
-		return;
-	}
-	mdio_sync(mdio_addr);
-
-	/* Shift the command bits out. */
-	for (i = 31; i >= 0; i--) {
-		int dataval =
-			(mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
-		writeb(dataval, mdio_addr);
-		mdio_delay();
-		writeb(dataval | MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	/* Clear out extra bits. */
-	for (i = 2; i > 0; i--) {
-		writeb(0, mdio_addr);
-		mdio_delay();
-		writeb(MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	DPRINTK("EXIT\n");
-}
-
-
-static int netdrv_open(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	int retval;
-	void *ioaddr = tp->mmio_addr;
-
-	DPRINTK("ENTER\n");
-
-	retval = request_irq(dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
-	if (retval) {
-		DPRINTK("EXIT, returning %d\n", retval);
-		return retval;
-	}
-
-	tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
-					   &tp->tx_bufs_dma);
-	tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
-					   &tp->rx_ring_dma);
-	if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
-		free_irq(dev->irq, dev);
-
-		if (tp->tx_bufs)
-			pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
-					    tp->tx_bufs, tp->tx_bufs_dma);
-		if (tp->rx_ring)
-			pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
-					    tp->rx_ring, tp->rx_ring_dma);
-
-		DPRINTK("EXIT, returning -ENOMEM\n");
-		return -ENOMEM;
-
-	}
-
-	tp->full_duplex = tp->duplex_lock;
-	tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
-
-	netdrv_init_ring(dev);
-	netdrv_hw_start(dev);
-
-	netdev_dbg(dev, "ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
-		   (unsigned long long)pci_resource_start(tp->pci_dev, 1),
-		   dev->irq, NETDRV_R8(MediaStatus),
-		   tp->full_duplex ? "full" : "half");
-
-	/* Set the timer to switch to check for link beat and perhaps switch
-	   to an alternate media type. */
-	init_timer(&tp->timer);
-	tp->timer.expires = jiffies + 3 * HZ;
-	tp->timer.data = (unsigned long) dev;
-	tp->timer.function = netdrv_timer;
-	add_timer(&tp->timer);
-
-	DPRINTK("EXIT, returning 0\n");
-	return 0;
-}
-
-
-/* Start the hardware at open or resume. */
-static void netdrv_hw_start(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	u32 i;
-
-	DPRINTK("ENTER\n");
-
-	/* Soft reset the chip. */
-	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
-	udelay(100);
-
-	/* Check that the chip has finished the reset. */
-	for (i = 1000; i > 0; i--)
-		if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
-			break;
-
-	/* Restore our idea of the MAC address. */
-	NETDRV_W32_F(MAC0 + 0, cpu_to_le32(*(u32 *)(dev->dev_addr + 0)));
-	NETDRV_W32_F(MAC0 + 4, cpu_to_le32(*(u32 *)(dev->dev_addr + 4)));
-
-	/* Must enable Tx/Rx before setting transfer thresholds! */
-	NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
-		    CmdRxEnb | CmdTxEnb);
-
-	i = netdrv_rx_config |
-		(NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
-	NETDRV_W32_F(RxConfig, i);
-
-	/* Check this value: the documentation for IFG contradicts ifself. */
-	NETDRV_W32(TxConfig, (TX_DMA_BURST << TxDMAShift));
-
-	/* unlock Config[01234] and BMCR register writes */
-	NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
-	udelay(10);
-
-	tp->cur_rx = 0;
-
-	/* Lock Config[01234] and BMCR register writes */
-	NETDRV_W8_F(Cfg9346, Cfg9346_Lock);
-	udelay(10);
-
-	/* init Rx ring buffer DMA address */
-	NETDRV_W32_F(RxBuf, tp->rx_ring_dma);
-
-	/* init Tx buffer DMA addresses */
-	for (i = 0; i < NUM_TX_DESC; i++)
-		NETDRV_W32_F(TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
-
-	NETDRV_W32_F(RxMissed, 0);
-
-	netdrv_set_rx_mode(dev);
-
-	/* no early-rx interrupts */
-	NETDRV_W16(MultiIntr, NETDRV_R16(MultiIntr) & MultiIntrClear);
-
-	/* make sure RxTx has started */
-	NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
-		    CmdRxEnb | CmdTxEnb);
-
-	/* Enable all known interrupts by setting the interrupt mask. */
-	NETDRV_W16_F(IntrMask, netdrv_intr_mask);
-
-	netif_start_queue(dev);
-
-	DPRINTK("EXIT\n");
-}
-
-
-/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void netdrv_init_ring(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	tp->cur_rx = 0;
-	atomic_set(&tp->cur_tx, 0);
-	atomic_set(&tp->dirty_tx, 0);
-
-	for (i = 0; i < NUM_TX_DESC; i++) {
-		tp->tx_info[i].skb = NULL;
-		tp->tx_info[i].mapping = 0;
-		tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
-	}
-
-	DPRINTK("EXIT\n");
-}
-
-
-static void netdrv_timer(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *) data;
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	int next_tick = 60 * HZ;
-	int mii_lpa;
-
-	mii_lpa = mdio_read(dev, tp->phys[0], MII_LPA);
-
-	if (!tp->duplex_lock && mii_lpa != 0xffff) {
-		int duplex = ((mii_lpa & LPA_100FULL) ||
-			     (mii_lpa & 0x01C0) == 0x0040);
-		if (tp->full_duplex != duplex) {
-			tp->full_duplex = duplex;
-			netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
-				    tp->full_duplex ? "full" : "half",
-				    tp->phys[0], mii_lpa);
-			NETDRV_W8(Cfg9346, Cfg9346_Unlock);
-			NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
-			NETDRV_W8(Cfg9346, Cfg9346_Lock);
-		}
-	}
-
-	netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
-		   NETDRV_R16(NWayLPAR));
-	netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x RxStatus %04lx\n",
-		   NETDRV_R16(IntrMask),
-		   NETDRV_R16(IntrStatus),
-		   NETDRV_R32(RxEarlyStatus));
-	netdev_dbg(dev, "Chip config %02x %02x\n",
-		   NETDRV_R8(Config0), NETDRV_R8(Config1));
-
-	tp->timer.expires = jiffies + next_tick;
-	add_timer(&tp->timer);
-}
-
-
-static void netdrv_tx_clear(struct net_device *dev)
-{
-	int i;
-	struct netdrv_private *tp = netdev_priv(dev);
-
-	atomic_set(&tp->cur_tx, 0);
-	atomic_set(&tp->dirty_tx, 0);
-
-	/* Dump the unsent Tx packets. */
-	for (i = 0; i < NUM_TX_DESC; i++) {
-		struct ring_info *rp = &tp->tx_info[i];
-		if (rp->mapping != 0) {
-			pci_unmap_single(tp->pci_dev, rp->mapping,
-					 rp->skb->len, PCI_DMA_TODEVICE);
-			rp->mapping = 0;
-		}
-		if (rp->skb) {
-			dev_kfree_skb(rp->skb);
-			rp->skb = NULL;
-			dev->stats.tx_dropped++;
-		}
-	}
-}
-
-
-static void netdrv_tx_timeout(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	int i;
-	u8 tmp8;
-	unsigned long flags;
-
-	netdev_dbg(dev, "Transmit timeout, status %02x %04x media %02x\n",
-		   NETDRV_R8(ChipCmd),
-		   NETDRV_R16(IntrStatus),
-		   NETDRV_R8(MediaStatus));
-
-	/* disable Tx ASAP, if not already */
-	tmp8 = NETDRV_R8(ChipCmd);
-	if (tmp8 & CmdTxEnb)
-		NETDRV_W8(ChipCmd, tmp8 & ~CmdTxEnb);
-
-	/* Disable interrupts by clearing the interrupt mask. */
-	NETDRV_W16(IntrMask, 0x0000);
-
-	/* Emit info to figure out what went wrong. */
-	netdev_dbg(dev, "Tx queue start entry %d dirty entry %d\n",
-		   atomic_read(&tp->cur_tx),
-		   atomic_read(&tp->dirty_tx));
-	for (i = 0; i < NUM_TX_DESC; i++)
-		netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
-			   i, NETDRV_R32(TxStatus0 + (i * 4)),
-			   i == atomic_read(&tp->dirty_tx) % NUM_TX_DESC ?
-			   "(queue head)" : "");
-
-	/* Stop a shared interrupt from scavenging while we are. */
-	spin_lock_irqsave(&tp->lock, flags);
-
-	netdrv_tx_clear(dev);
-
-	spin_unlock_irqrestore(&tp->lock, flags);
-
-	/* ...and finally, reset everything */
-	netdrv_hw_start(dev);
-
-	netif_wake_queue(dev);
-}
-
-
-
-static int netdrv_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	int entry;
-
-	/* Calculate the next Tx descriptor entry. */
-	entry = atomic_read(&tp->cur_tx) % NUM_TX_DESC;
-
-	assert(tp->tx_info[entry].skb == NULL);
-	assert(tp->tx_info[entry].mapping == 0);
-
-	tp->tx_info[entry].skb = skb;
-	/* tp->tx_info[entry].mapping = 0; */
-	skb_copy_from_linear_data(skb, tp->tx_buf[entry], skb->len);
-
-	/* Note: the chip doesn't have auto-pad! */
-	NETDRV_W32(TxStatus0 + (entry * sizeof(u32)),
-		   tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
-
-	atomic_inc(&tp->cur_tx);
-	if ((atomic_read(&tp->cur_tx) - atomic_read(&tp->dirty_tx)) >= NUM_TX_DESC)
-		netif_stop_queue(dev);
-
-	netdev_dbg(dev, "Queued Tx packet at %p size %u to slot %d\n",
-		   skb->data, skb->len, entry);
-
-	return NETDEV_TX_OK;
-}
-
-
-static void netdrv_tx_interrupt(struct net_device *dev,
-				struct netdrv_private *tp,
-				void *ioaddr)
-{
-	int cur_tx, dirty_tx, tx_left;
-
-	assert(dev != NULL);
-	assert(tp != NULL);
-	assert(ioaddr != NULL);
-
-	dirty_tx = atomic_read(&tp->dirty_tx);
-
-	cur_tx = atomic_read(&tp->cur_tx);
-	tx_left = cur_tx - dirty_tx;
-	while (tx_left > 0) {
-		int entry = dirty_tx % NUM_TX_DESC;
-		int txstatus;
-
-		txstatus = NETDRV_R32(TxStatus0 + (entry * sizeof(u32)));
-
-		if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
-			break;	/* It still hasn't been Txed */
-
-		/* Note: TxCarrierLost is always asserted at 100mbps. */
-		if (txstatus & (TxOutOfWindow | TxAborted)) {
-			/* There was an major error, log it. */
-			netdev_dbg(dev, "Transmit error, Tx status %#08x\n",
-				   txstatus);
-			dev->stats.tx_errors++;
-			if (txstatus & TxAborted) {
-				dev->stats.tx_aborted_errors++;
-				NETDRV_W32(TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
-			}
-			if (txstatus & TxCarrierLost)
-				dev->stats.tx_carrier_errors++;
-			if (txstatus & TxOutOfWindow)
-				dev->stats.tx_window_errors++;
-		} else {
-			if (txstatus & TxUnderrun) {
-				/* Add 64 to the Tx FIFO threshold. */
-				if (tp->tx_flag < 0x00300000)
-					tp->tx_flag += 0x00020000;
-				dev->stats.tx_fifo_errors++;
-			}
-			dev->stats.collisions += (txstatus >> 24) & 15;
-			dev->stats.tx_bytes += txstatus & 0x7ff;
-			dev->stats.tx_packets++;
-		}
-
-		/* Free the original skb. */
-		if (tp->tx_info[entry].mapping != 0) {
-			pci_unmap_single(tp->pci_dev,
-					 tp->tx_info[entry].mapping,
-					 tp->tx_info[entry].skb->len,
-					 PCI_DMA_TODEVICE);
-			tp->tx_info[entry].mapping = 0;
-		}
-		dev_kfree_skb_irq(tp->tx_info[entry].skb);
-		tp->tx_info[entry].skb = NULL;
-		dirty_tx++;
-		if (dirty_tx < 0) { /* handle signed int overflow */
-			atomic_sub(cur_tx, &tp->cur_tx); /* XXX racy? */
-			dirty_tx = cur_tx - tx_left + 1;
-		}
-		if (netif_queue_stopped(dev))
-			netif_wake_queue(dev);
-
-		cur_tx = atomic_read(&tp->cur_tx);
-		tx_left = cur_tx - dirty_tx;
-
-	}
-
-#ifndef NETDRV_NDEBUG
-	if (atomic_read(&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
-		netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d\n",
-			   dirty_tx, atomic_read(&tp->cur_tx));
-		dirty_tx += NUM_TX_DESC;
-	}
-#endif /* NETDRV_NDEBUG */
-
-	atomic_set(&tp->dirty_tx, dirty_tx);
-}
-
-
-/* TODO: clean this up!  Rx reset need not be this intensive */
-static void netdrv_rx_err(u32 rx_status, struct net_device *dev,
-			  struct netdrv_private *tp, void *ioaddr)
-{
-	u8 tmp8;
-	int tmp_work = 1000;
-
-	netdev_dbg(dev, "Ethernet frame had errors, status %08x\n", rx_status);
-	if (rx_status & RxTooLong)
-		netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
-			   rx_status);
-		/* A.C.: The chip hangs here. */
-	dev->stats.rx_errors++;
-	if (rx_status & (RxBadSymbol | RxBadAlign))
-		dev->stats.rx_frame_errors++;
-	if (rx_status & (RxRunt | RxTooLong))
-		dev->stats.rx_length_errors++;
-	if (rx_status & RxCRCErr)
-		dev->stats.rx_crc_errors++;
-	/* Reset the receiver, based on RealTek recommendation.(Bug?) */
-	tp->cur_rx = 0;
-
-	/* disable receive */
-	tmp8 = NETDRV_R8(ChipCmd) & ChipCmdClear;
-	NETDRV_W8_F(ChipCmd, tmp8 | CmdTxEnb);
-
-	/* A.C.: Reset the multicast list. */
-	netdrv_set_rx_mode(dev);
-
-	/* XXX potentially temporary hack to
-	 * restart hung receiver */
-	while (--tmp_work > 0) {
-		tmp8 = NETDRV_R8(ChipCmd);
-		if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
-			break;
-		NETDRV_W8_F(ChipCmd,
-			    (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
-	}
-
-	/* G.S.: Re-enable receiver */
-	/* XXX temporary hack to work around receiver hang */
-	netdrv_set_rx_mode(dev);
-
-	if (tmp_work <= 0)
-		netdev_warn(dev, "tx/rx enable wait too long\n");
-}
-
-
-/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the
-   field alignments and semantics. */
-static void netdrv_rx_interrupt(struct net_device *dev,
-				struct netdrv_private *tp, void *ioaddr)
-{
-	unsigned char *rx_ring;
-	u16 cur_rx;
-
-	assert(dev != NULL);
-	assert(tp != NULL);
-	assert(ioaddr != NULL);
-
-	rx_ring = tp->rx_ring;
-	cur_rx = tp->cur_rx;
-
-	netdev_dbg(dev, "In netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
-		   cur_rx, NETDRV_R16(RxBufAddr),
-		   NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
-
-	while ((NETDRV_R8(ChipCmd) & RxBufEmpty) == 0) {
-		int ring_offset = cur_rx % RX_BUF_LEN;
-		u32 rx_status;
-		unsigned int rx_size;
-		unsigned int pkt_size;
-		struct sk_buff *skb;
-
-		/* read size+status of next frame from DMA ring buffer */
-		rx_status = le32_to_cpu(*(u32 *)(rx_ring + ring_offset));
-		rx_size = rx_status >> 16;
-		pkt_size = rx_size - 4;
-
-		netdev_dbg(dev, "netdrv_rx() status %04x, size %04x, cur %04x\n",
-			   rx_status, rx_size, cur_rx);
-#if defined(NETDRV_DEBUG) && (NETDRV_DEBUG > 2)
-		print_hex_dump_bytes("Frame contents: ", HEX_DUMP_OFFSET,
-				     &rx_ring[ring_offset], 70);
-#endif
-
-		/* If Rx err or invalid rx_size/rx_status received
-		 *(which happens if we get lost in the ring),
-		 * Rx process gets reset, so we abort any further
-		 * Rx processing.
-		 */
-		if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
-		    (!(rx_status & RxStatusOK))) {
-			netdrv_rx_err(rx_status, dev, tp, ioaddr);
-			return;
-		}
-
-		/* Malloc up new buffer, compatible with net-2e. */
-		/* Omit the four octet CRC from the length. */
-
-		/* TODO: consider allocating skb's outside of
-		 * interrupt context, both to speed interrupt processing,
-		 * and also to reduce the chances of having to
-		 * drop packets here under memory pressure.
-		 */
-
-		skb = dev_alloc_skb(pkt_size + 2);
-		if (skb) {
-			skb_reserve(skb, 2);	/* 16 byte align the IP fields. */
-
-			skb_copy_to_linear_data(skb, &rx_ring[ring_offset + 4], pkt_size);
-			skb_put(skb, pkt_size);
-
-			skb->protocol = eth_type_trans(skb, dev);
-			netif_rx(skb);
-			dev->stats.rx_bytes += pkt_size;
-			dev->stats.rx_packets++;
-		} else {
-			netdev_warn(dev, "Memory squeeze, dropping packet\n");
-			dev->stats.rx_dropped++;
-		}
-
-		cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
-		NETDRV_W16_F(RxBufPtr, cur_rx - 16);
-	}
-
-	netdev_dbg(dev, "Done netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
-		   cur_rx, NETDRV_R16(RxBufAddr),
-		   NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
-
-	tp->cur_rx = cur_rx;
-}
-
-
-static void netdrv_weird_interrupt(struct net_device *dev,
-				   struct netdrv_private *tp,
-				   void *ioaddr,
-				   int status, int link_changed)
-{
-	netdev_printk(KERN_DEBUG, dev, "Abnormal interrupt, status %08x\n",
-		      status);
-
-	assert(dev != NULL);
-	assert(tp != NULL);
-	assert(ioaddr != NULL);
-
-	/* Update the error count. */
-	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
-	NETDRV_W32(RxMissed, 0);
-
-	if ((status & RxUnderrun) && link_changed &&
-	    (tp->drv_flags & HAS_LNK_CHNG)) {
-		/* Really link-change on new chips. */
-		int lpar = NETDRV_R16(NWayLPAR);
-		int duplex = ((lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 ||
-			     tp->duplex_lock);
-		if (tp->full_duplex != duplex) {
-			tp->full_duplex = duplex;
-			NETDRV_W8(Cfg9346, Cfg9346_Unlock);
-			NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
-			NETDRV_W8(Cfg9346, Cfg9346_Lock);
-		}
-		status &= ~RxUnderrun;
-	}
-
-	/* XXX along with netdrv_rx_err, are we double-counting errors? */
-	if (status & (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
-		dev->stats.rx_errors++;
-
-	if (status & (PCSTimeout))
-		dev->stats.rx_length_errors++;
-	if (status & (RxUnderrun | RxFIFOOver))
-		dev->stats.rx_fifo_errors++;
-	if (status & RxOverflow) {
-		dev->stats.rx_over_errors++;
-		tp->cur_rx = NETDRV_R16(RxBufAddr) % RX_BUF_LEN;
-		NETDRV_W16_F(RxBufPtr, tp->cur_rx - 16);
-	}
-	if (status & PCIErr) {
-		u16 pci_cmd_status;
-		pci_read_config_word(tp->pci_dev, PCI_STATUS, &pci_cmd_status);
-
-		netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
-	}
-}
-
-
-/* The interrupt handler does all of the Rx thread work and cleans up
-   after the Tx thread. */
-static irqreturn_t netdrv_interrupt(int irq, void *dev_instance)
-{
-	struct net_device *dev = (struct net_device *) dev_instance;
-	struct netdrv_private *tp = netdev_priv(dev);
-	int boguscnt = max_interrupt_work;
-	void *ioaddr = tp->mmio_addr;
-	int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */
-	int handled = 0;
-
-	spin_lock(&tp->lock);
-
-	do {
-		status = NETDRV_R16(IntrStatus);
-
-		/* h/w no longer present(hotplug?) or major error, bail */
-		if (status == 0xFFFF)
-			break;
-
-		handled = 1;
-		/* Acknowledge all of the current interrupt sources ASAP */
-		NETDRV_W16_F(IntrStatus, status);
-
-		netdev_dbg(dev, "interrupt  status=%#04x new intstat=%#04x\n",
-			   status, NETDRV_R16(IntrStatus));
-
-		if ((status &
-		     (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
-		      RxFIFOOver | TxErr | TxOK | RxErr | RxOK)) == 0)
-			break;
-
-		/* Check uncommon events with one test. */
-		if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
-			     RxFIFOOver | TxErr | RxErr))
-			netdrv_weird_interrupt(dev, tp, ioaddr,
-					       status, link_changed);
-
-		if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver))	/* Rx interrupt */
-			netdrv_rx_interrupt(dev, tp, ioaddr);
-
-		if (status & (TxOK | TxErr))
-			netdrv_tx_interrupt(dev, tp, ioaddr);
-
-		boguscnt--;
-	} while (boguscnt > 0);
-
-	if (boguscnt <= 0) {
-		netdev_warn(dev, "Too much work at interrupt, IntrStatus=%#04x\n",
-			    status);
-
-		/* Clear all interrupt sources. */
-		NETDRV_W16(IntrStatus, 0xffff);
-	}
-
-	spin_unlock(&tp->lock);
-
-	netdev_dbg(dev, "exiting interrupt, intr_status=%#04x\n",
-		   NETDRV_R16(IntrStatus));
-	return IRQ_RETVAL(handled);
-}
-
-
-static int netdrv_close(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	unsigned long flags;
-
-	DPRINTK("ENTER\n");
-
-	netif_stop_queue(dev);
-
-	netdev_dbg(dev, "Shutting down ethercard, status was %#04x\n",
-		   NETDRV_R16(IntrStatus));
-
-	del_timer_sync(&tp->timer);
-
-	spin_lock_irqsave(&tp->lock, flags);
-
-	/* Stop the chip's Tx and Rx DMA processes. */
-	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
-
-	/* Disable interrupts by clearing the interrupt mask. */
-	NETDRV_W16(IntrMask, 0x0000);
-
-	/* Update the error counts. */
-	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
-	NETDRV_W32(RxMissed, 0);
-
-	spin_unlock_irqrestore(&tp->lock, flags);
-
-	free_irq(dev->irq, dev);
-
-	netdrv_tx_clear(dev);
-
-	pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
-			    tp->rx_ring, tp->rx_ring_dma);
-	pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
-			    tp->tx_bufs, tp->tx_bufs_dma);
-	tp->rx_ring = NULL;
-	tp->tx_bufs = NULL;
-
-	/* Green! Put the chip in low-power mode. */
-	NETDRV_W8(Cfg9346, Cfg9346_Unlock);
-	NETDRV_W8(Config1, 0x03);
-	NETDRV_W8(Cfg9346, Cfg9346_Lock);
-
-	DPRINTK("EXIT\n");
-	return 0;
-}
-
-
-static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	struct mii_ioctl_data *data = if_mii(rq);
-	unsigned long flags;
-	int rc = 0;
-
-	DPRINTK("ENTER\n");
-
-	switch (cmd) {
-	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
-		data->phy_id = tp->phys[0] & 0x3f;
-		/* Fall Through */
-
-	case SIOCGMIIREG:		/* Read MII PHY register. */
-		spin_lock_irqsave(&tp->lock, flags);
-		data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
-		spin_unlock_irqrestore(&tp->lock, flags);
-		break;
-
-	case SIOCSMIIREG:		/* Write MII PHY register. */
-		spin_lock_irqsave(&tp->lock, flags);
-		mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
-		spin_unlock_irqrestore(&tp->lock, flags);
-		break;
-
-	default:
-		rc = -EOPNOTSUPP;
-		break;
-	}
-
-	DPRINTK("EXIT, returning %d\n", rc);
-	return rc;
-}
-
-/* Set or clear the multicast filter for this adaptor.
-   This routine is not state sensitive and need not be SMP locked. */
-
-static void netdrv_set_rx_mode(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	u32 mc_filter[2];	/* Multicast hash filter */
-	int rx_mode;
-	u32 tmp;
-
-	DPRINTK("ENTER\n");
-
-	netdev_dbg(dev, "%s(%04x) done -- Rx config %08lx\n",
-		   __func__, dev->flags, NETDRV_R32(RxConfig));
-
-	/* Note: do not reorder, GCC is clever about common statements. */
-	if (dev->flags & IFF_PROMISC) {
-		rx_mode =
-			AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
-			AcceptAllPhys;
-		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
-		   (dev->flags & IFF_ALLMULTI)) {
-		/* Too many to filter perfectly -- accept all multicasts. */
-		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
-		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else {
-		struct netdev_hw_addr *ha;
-
-		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
-		mc_filter[1] = mc_filter[0] = 0;
-		netdev_for_each_mc_addr(ha, dev) {
-			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
-
-			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
-		}
-	}
-
-	/* if called from irq handler, lock already acquired */
-	if (!in_irq())
-		spin_lock_irq(&tp->lock);
-
-	/* We can safely update without stopping the chip. */
-	tmp = netdrv_rx_config | rx_mode |
-		(NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
-	NETDRV_W32_F(RxConfig, tmp);
-	NETDRV_W32_F(MAR0 + 0, mc_filter[0]);
-	NETDRV_W32_F(MAR0 + 4, mc_filter[1]);
-
-	if (!in_irq())
-		spin_unlock_irq(&tp->lock);
-
-	DPRINTK("EXIT\n");
-}
-
-
-#ifdef CONFIG_PM
-
-static int netdrv_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	unsigned long flags;
-
-	if (!netif_running(dev))
-		return 0;
-	netif_device_detach(dev);
-
-	spin_lock_irqsave(&tp->lock, flags);
-
-	/* Disable interrupts, stop Tx and Rx. */
-	NETDRV_W16(IntrMask, 0x0000);
-	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
-
-	/* Update the error counts. */
-	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
-	NETDRV_W32(RxMissed, 0);
-
-	spin_unlock_irqrestore(&tp->lock, flags);
-
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	return 0;
-}
-
-
-static int netdrv_resume(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	/*struct netdrv_private *tp = netdev_priv(dev);*/
-
-	if (!netif_running(dev))
-		return 0;
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	netif_device_attach(dev);
-	netdrv_hw_start(dev);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-
-static struct pci_driver netdrv_pci_driver = {
-	.name		= MODNAME,
-	.id_table	= netdrv_pci_tbl,
-	.probe		= netdrv_init_one,
-	.remove		= __devexit_p(netdrv_remove_one),
-#ifdef CONFIG_PM
-	.suspend	= netdrv_suspend,
-	.resume		= netdrv_resume,
-#endif /* CONFIG_PM */
-};
-
-
-static int __init netdrv_init_module(void)
-{
-/* when a module, this is printed whether or not devices are found in probe */
-#ifdef MODULE
-	printk(version);
-#endif
-	return pci_register_driver(&netdrv_pci_driver);
-}
-
-
-static void __exit netdrv_cleanup_module(void)
-{
-	pci_unregister_driver(&netdrv_pci_driver);
-}
-
-
-module_init(netdrv_init_module);
-module_exit(netdrv_cleanup_module);