Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp->data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot & felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...

1 files changed, 103 insertions, 30 deletions

diff --git a/include/net/page_pool.h b/include/net/page_pool.h
index 79a805542d0f..ea5fb70e5101 100644
--- a/include/net/page_pool.h
+++ b/include/net/page_pool.h
@@ -84,6 +84,48 @@ struct page_pool_params {
 	void *init_arg;
 };
 
+#ifdef CONFIG_PAGE_POOL_STATS
+struct page_pool_alloc_stats {
+	u64 fast; /* fast path allocations */
+	u64 slow; /* slow-path order 0 allocations */
+	u64 slow_high_order; /* slow-path high order allocations */
+	u64 empty; /* failed refills due to empty ptr ring, forcing
+		    * slow path allocation
+		    */
+	u64 refill; /* allocations via successful refill */
+	u64 waive;  /* failed refills due to numa zone mismatch */
+};
+
+struct page_pool_recycle_stats {
+	u64 cached;	/* recycling placed page in the cache. */
+	u64 cache_full; /* cache was full */
+	u64 ring;	/* recycling placed page back into ptr ring */
+	u64 ring_full;	/* page was released from page-pool because
+			 * PTR ring was full.
+			 */
+	u64 released_refcnt; /* page released because of elevated
+			      * refcnt
+			      */
+};
+
+/* This struct wraps the above stats structs so users of the
+ * page_pool_get_stats API can pass a single argument when requesting the
+ * stats for the page pool.
+ */
+struct page_pool_stats {
+	struct page_pool_alloc_stats alloc_stats;
+	struct page_pool_recycle_stats recycle_stats;
+};
+
+/*
+ * Drivers that wish to harvest page pool stats and report them to users
+ * (perhaps via ethtool, debugfs, or another mechanism) can allocate a
+ * struct page_pool_stats call page_pool_get_stats to get stats for the specified pool.
+ */
+bool page_pool_get_stats(struct page_pool *pool,
+			 struct page_pool_stats *stats);
+#endif
+
 struct page_pool {
 	struct page_pool_params p;
 
@@ -96,6 +138,11 @@ struct page_pool {
 	unsigned int frag_offset;
 	struct page *frag_page;
 	long frag_users;
+
+#ifdef CONFIG_PAGE_POOL_STATS
+	/* these stats are incremented while in softirq context */
+	struct page_pool_alloc_stats alloc_stats;
+#endif
 	u32 xdp_mem_id;
 
 	/*
@@ -126,6 +173,10 @@ struct page_pool {
 	 */
 	struct ptr_ring ring;
 
+#ifdef CONFIG_PAGE_POOL_STATS
+	/* recycle stats are per-cpu to avoid locking */
+	struct page_pool_recycle_stats __percpu *recycle_stats;
+#endif
 	atomic_t pages_state_release_cnt;
 
 	/* A page_pool is strictly tied to a single RX-queue being
@@ -201,21 +252,67 @@ static inline void page_pool_put_page_bulk(struct page_pool *pool, void **data,
 }
 #endif
 
-void page_pool_put_page(struct page_pool *pool, struct page *page,
-			unsigned int dma_sync_size, bool allow_direct);
+void page_pool_put_defragged_page(struct page_pool *pool, struct page *page,
+				  unsigned int dma_sync_size,
+				  bool allow_direct);
 
-/* Same as above but will try to sync the entire area pool->max_len */
-static inline void page_pool_put_full_page(struct page_pool *pool,
-					   struct page *page, bool allow_direct)
+static inline void page_pool_fragment_page(struct page *page, long nr)
+{
+	atomic_long_set(&page->pp_frag_count, nr);
+}
+
+static inline long page_pool_defrag_page(struct page *page, long nr)
+{
+	long ret;
+
+	/* If nr == pp_frag_count then we have cleared all remaining
+	 * references to the page. No need to actually overwrite it, instead
+	 * we can leave this to be overwritten by the calling function.
+	 *
+	 * The main advantage to doing this is that an atomic_read is
+	 * generally a much cheaper operation than an atomic update,
+	 * especially when dealing with a page that may be partitioned
+	 * into only 2 or 3 pieces.
+	 */
+	if (atomic_long_read(&page->pp_frag_count) == nr)
+		return 0;
+
+	ret = atomic_long_sub_return(nr, &page->pp_frag_count);
+	WARN_ON(ret < 0);
+	return ret;
+}
+
+static inline bool page_pool_is_last_frag(struct page_pool *pool,
+					  struct page *page)
+{
+	/* If fragments aren't enabled or count is 0 we were the last user */
+	return !(pool->p.flags & PP_FLAG_PAGE_FRAG) ||
+	       (page_pool_defrag_page(page, 1) == 0);
+}
+
+static inline void page_pool_put_page(struct page_pool *pool,
+				      struct page *page,
+				      unsigned int dma_sync_size,
+				      bool allow_direct)
 {
 	/* When page_pool isn't compiled-in, net/core/xdp.c doesn't
 	 * allow registering MEM_TYPE_PAGE_POOL, but shield linker.
 	 */
 #ifdef CONFIG_PAGE_POOL
-	page_pool_put_page(pool, page, -1, allow_direct);
+	if (!page_pool_is_last_frag(pool, page))
+		return;
+
+	page_pool_put_defragged_page(pool, page, dma_sync_size, allow_direct);
 #endif
 }
 
+/* Same as above but will try to sync the entire area pool->max_len */
+static inline void page_pool_put_full_page(struct page_pool *pool,
+					   struct page *page, bool allow_direct)
+{
+	page_pool_put_page(pool, page, -1, allow_direct);
+}
+
 /* Same as above but the caller must guarantee safe context. e.g NAPI */
 static inline void page_pool_recycle_direct(struct page_pool *pool,
 					    struct page *page)
@@ -243,30 +340,6 @@ static inline void page_pool_set_dma_addr(struct page *page, dma_addr_t addr)
 		page->dma_addr_upper = upper_32_bits(addr);
 }
 
-static inline void page_pool_set_frag_count(struct page *page, long nr)
-{
-	atomic_long_set(&page->pp_frag_count, nr);
-}
-
-static inline long page_pool_atomic_sub_frag_count_return(struct page *page,
-							  long nr)
-{
-	long ret;
-
-	/* As suggested by Alexander, atomic_long_read() may cover up the
-	 * reference count errors, so avoid calling atomic_long_read() in
-	 * the cases of freeing or draining the page_frags, where we would
-	 * not expect it to match or that are slowpath anyway.
-	 */
-	if (__builtin_constant_p(nr) &&
-	    atomic_long_read(&page->pp_frag_count) == nr)
-		return 0;
-
-	ret = atomic_long_sub_return(nr, &page->pp_frag_count);
-	WARN_ON(ret < 0);
-	return ret;
-}
-
 static inline bool is_page_pool_compiled_in(void)
 {
 #ifdef CONFIG_PAGE_POOL