tokenring: delete all remaining driver support

This represents the mass deletion of the of the tokenring support.

It gets rid of:
  - the net/tr.c which the drivers depended on
  - the drivers/net component
  - the Kbuild infrastructure around it
  - any tokenring related CONFIG_ settings in any defconfigs
  - the tokenring headers in the include/linux dir
  - the firmware associated with the tokenring drivers.
  - any associated token ring documentation.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

4 files changed, 0 insertions, 514 deletions

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 3c9b616c834a..b738f2dc38d9 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -186,7 +186,6 @@ header-y += if_pppox.h
 header-y += if_slip.h
 header-y += if_strip.h
 header-y += if_team.h
-header-y += if_tr.h
 header-y += if_tun.h
 header-y += if_tunnel.h
 header-y += if_vlan.h
diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h
deleted file mode 100644
index 06695b74d405..000000000000
--- a/include/linux/ibmtr.h
+++ /dev/null
@@ -1,373 +0,0 @@
-#ifndef __LINUX_IBMTR_H__
-#define __LINUX_IBMTR_H__
-
-/* Definitions for an IBM Token Ring card. */
-/* This file is distributed under the GNU GPL   */
-
-/* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */
-
-#define TR_RETRY_INTERVAL	(30*HZ)	/* 500 on PC = 5 s */
-#define TR_RST_TIME		(msecs_to_jiffies(50))	/* 5 on PC = 50 ms */
-#define TR_BUSY_INTERVAL	(msecs_to_jiffies(200))	/* 5 on PC = 200 ms */
-#define TR_SPIN_INTERVAL	(3*HZ)	/* 3 seconds before init timeout */
-
-#define TR_ISA 1
-#define TR_MCA 2
-#define TR_ISAPNP 3
-#define NOTOK 0
-
-#define IBMTR_SHARED_RAM_SIZE 0x10000
-#define IBMTR_IO_EXTENT 4
-#define IBMTR_MAX_ADAPTERS 4
-
-#define CHANNEL_ID      0X1F30
-#define AIP             0X1F00
-#define AIPADAPTYPE     0X1FA0
-#define AIPDATARATE     0X1FA2
-#define AIPEARLYTOKEN   0X1FA4
-#define AIPAVAILSHRAM   0X1FA6
-#define AIPSHRAMPAGE    0X1FA8
-#define AIP4MBDHB       0X1FAA
-#define AIP16MBDHB      0X1FAC
-#define AIPFID		0X1FBA
-
-#define ADAPTRESET      0x1     /* Control Adapter reset (add to base) */
-#define ADAPTRESETREL   0x2     /* Release Adapter from reset ( """)  */
-#define ADAPTINTREL	0x3 	/* Adapter interrupt release */
-
-#define GLOBAL_INT_ENABLE 0x02f0
-
-/* MMIO bits 0-4 select register */
-#define RRR_EVEN       0x00 /* Shared RAM relocation registers - even and odd */
-/* Used to set the starting address of shared RAM  */
-/* Bits 1 through 7 of this register map to bits 13 through 19 of the shared
-   RAM address.*/
-/* ie: 0x02 sets RAM address to ...ato!  issy su wazzoo !! GODZILLA!!! */
-#define RRR_ODD         0x01
-/* Bits 2 and 3 of this register can be read to determine shared RAM size */
-/* 00 for 8k, 01 for 16k, 10 for 32k, 11 for 64k  */
-#define WRBR_EVEN       0x02    /* Write region base registers - even and odd */
-#define WRBR_ODD        0x03
-#define WWOR_EVEN       0x04    /* Write window open registers - even and odd */
-#define WWOR_ODD        0x05
-#define WWCR_EVEN       0x06   /* Write window close registers - even and odd */
-#define WWCR_ODD        0x07
-
-/* Interrupt status registers - PC system  - even and odd */
-#define ISRP_EVEN       0x08
-
-#define TCR_INT    0x10    /* Bit 4 - Timer interrupt.  The TVR_EVEN timer has
-                                                                   expired. */
-#define ERR_INT	   0x08    /* Bit 3 - Error interrupt.  The adapter has had an
-                                                            internal error. */
-#define ACCESS_INT 0x04    /* Bit 2 - Access interrupt.  You have attempted to
-				      write to an invalid area of shared RAM
-				      or an invalid register within the MMIO. */
-/* In addition, the following bits within ISRP_EVEN can be turned on or off   */
-/* by you to control the interrupt processing:   */
-#define INT_ENABLE 0x40 /* Bit 6 - Interrupt enable.  If 0, no interrupts will
-                                   occur.  If 1, interrupts will occur normally.
-                                                         Normally set to 1.  */
-/* Bit 0 - Primary or alternate adapter.  Set to zero if this adapter is the
-		primary adapter, 1 if this adapter is the alternate adapter. */
-
-
-#define ISRP_ODD        0x09
-
-#define ADAP_CHK_INT 0x40 /* Bit 6 - Adapter check.  the adapter has
-                             encountered a serious problem and has closed
-                             itself.  Whoa.  */
-#define SRB_RESP_INT 0x20 /* Bit 5 - SRB response.  The adapter has accepted
-                             an SRB request and set the return code within
-                             the SRB. */
-#define ASB_FREE_INT 0x10 /* Bit 4 - ASB free.  The adapter has read the ASB
-                             and this area can be safely reused. This interrupt
-                             is only used if your application has set the ASB
-                             free request bit in ISRA_ODD or if an error was
-                             detected in your response. */
-#define ARB_CMD_INT  0x08 /* Bit 3 - ARB command.  The adapter has given you a
-                             command for action.  The command is located in the
-                             ARB area of shared memory. */
-#define SSB_RESP_INT 0x04 /* Bit 2 - SSB response.  The adapter has posted a
-                             response to your SRB (the response is located in
-                             the SSB area of shared memory). */
-/* Bit 1 - Bridge frame forward complete. */
-
-
-
-#define ISRA_EVEN 0x0A /*Interrupt status registers - adapter  - even and odd */
-/* Bit 7 - Internal parity error (on adapter's internal bus) */
-/* Bit 6 - Timer interrupt pending */
-/* Bit 5 - Access interrupt (attempt by adapter to access illegal address) */
-/* Bit 4 - Adapter microcode problem (microcode dead-man timer expired) */
-/* Bit 3 - Adapter processor check status */
-/* Bit 2 - Reserved */
-/* Bit 1 - Adapter hardware interrupt mask (prevents internal interrupts) */
-/* Bit 0 - Adapter software interrupt mask (prevents internal software ints) */
-
-#define ISRA_ODD        0x0B
-#define CMD_IN_SRB  0x20 /* Bit 5  - Indicates that you have placed a new
-                           command in the SRB and are ready for the adapter to
-                           process the command. */
-#define RESP_IN_ASB 0x10 /* Bit 4 - Indicates that you have placed a response
-                            (an ASB) in the shared RAM which is available for
-                            the adapter's use. */
-/* Bit 3 - Indicates that you are ready to put an SRB in the shared RAM, but
-	that a previous command is still pending.  The adapter will then
-	interrupt you when the previous command is completed */
-/* Bit 2 - Indicates that you are ready to put an ASB in the shared RAM, but
-	that a previous ASB is still pending.  The adapter will then interrupt
-	you when the previous ASB is copied.  */
-#define ARB_FREE 0x2
-#define SSB_FREE 0x1
-
-#define TCR_EVEN        0x0C    /* Timer control registers - even and odd */
-#define TCR_ODD         0x0D
-#define TVR_EVEN        0x0E    /* Timer value registers - even and odd */
-#define TVR_ODD         0x0F
-#define SRPR_EVEN       0x18    /* Shared RAM paging registers - even and odd */
-#define SRPR_ENABLE_PAGING 0xc0
-#define SRPR_ODD        0x19	/* Not used. */
-#define TOKREAD         0x60
-#define TOKOR           0x40
-#define TOKAND          0x20
-#define TOKWRITE        0x00
-
-/* MMIO bits 5-6 select operation */
-/* 00 is used to write to a register */
-/* 01 is used to bitwise AND a byte with a register */
-/* 10 is used to bitwise OR a byte with a register  */
-/* 11 is used to read from a register */
-
-/* MMIO bits 7-8 select area of interest.. see below */
-/* 00 selects attachment control area. */
-/* 01 is reserved. */
-/* 10 selects adapter identification area A containing the adapter encoded
-	address. */
-/* 11 selects the adapter identification area B containing test patterns. */
-
-#define PCCHANNELID 5049434F3631313039393020
-#define MCCHANNELID 4D4152533633583435313820
-
-#define ACA_OFFSET 0x1e00
-#define ACA_SET 0x40
-#define ACA_RESET 0x20
-#define ACA_RW 0x00
-
-#ifdef ENABLE_PAGING
-#define SET_PAGE(x) (writeb((x), ti->mmio + ACA_OFFSET+ ACA_RW + SRPR_EVEN))
-#else
-#define SET_PAGE(x)
-#endif
-
-/* do_tok_int possible values */
-#define FIRST_INT 1
-#define NOT_FIRST 2
-
-typedef enum {	CLOSED,	OPEN } open_state;
-//staic const char *printstate[] = { "CLOSED","OPEN"};
-
-struct tok_info {
-	unsigned char irq;
-	void __iomem *mmio;
-	unsigned char hw_address[32];
-	unsigned char adapter_type;
-	unsigned char data_rate;
-	unsigned char token_release;
-	unsigned char avail_shared_ram;
-	unsigned char shared_ram_paging;
-        unsigned char turbo;
-	unsigned short dhb_size4mb;
-	unsigned short rbuf_len4;
-	unsigned short rbuf_cnt4;
-	unsigned short maxmtu4;
-	unsigned short dhb_size16mb;
-	unsigned short rbuf_len16;
-	unsigned short rbuf_cnt16;
-	unsigned short maxmtu16;
-	/* Additions by David Morris       */
-	unsigned char do_tok_int;
-	wait_queue_head_t wait_for_reset;
-	unsigned char sram_base;
-	/* Additions by Peter De Schrijver */
-	unsigned char page_mask;          /* mask to select RAM page to Map*/
-	unsigned char mapped_ram_size;    /* size of RAM page */
-	__u32 sram_phys;          /* Shared memory base address */
-	void __iomem *sram_virt;          /* Shared memory base address */
-	void __iomem *init_srb;   /* Initial System Request Block address */
-	void __iomem *srb;                /* System Request Block address */
-	void __iomem *ssb;                /* System Status Block address */
-	void __iomem *arb;                /* Adapter Request Block address */
-	void __iomem *asb;                /* Adapter Status Block address */
-        __u8  init_srb_page;
-        __u8  srb_page;
-        __u8  ssb_page;
-        __u8  arb_page;
-        __u8  asb_page;
-	unsigned short exsap_station_id;
-	unsigned short global_int_enable;
-	struct sk_buff *current_skb;
-
-	unsigned char auto_speedsave;
-	open_state			open_status, sap_status;
-	enum {MANUAL, AUTOMATIC}	open_mode;
-	enum {FAIL, RESTART, REOPEN}	open_action;
-	enum {NO, YES}			open_failure;
-	unsigned char readlog_pending;
-	unsigned short adapter_int_enable; /* Adapter-specific int enable */
-        struct timer_list tr_timer;
-	unsigned char ring_speed;
-	spinlock_t lock;		/* SMP protection */
-};
-
-/* token ring adapter commands */
-#define DIR_INTERRUPT 		0x00 /* struct srb_interrupt */
-#define DIR_MOD_OPEN_PARAMS 	0x01
-#define DIR_OPEN_ADAPTER 	0x03 /* struct dir_open_adapter */
-#define DIR_CLOSE_ADAPTER   	0x04
-#define DIR_SET_GRP_ADDR    	0x06
-#define DIR_SET_FUNC_ADDR   	0x07 /* struct srb_set_funct_addr */
-#define DIR_READ_LOG 		0x08 /* struct srb_read_log */
-#define DLC_OPEN_SAP 		0x15 /* struct dlc_open_sap */
-#define DLC_CLOSE_SAP       	0x16
-#define DATA_LOST 		0x20 /* struct asb_rec */
-#define REC_DATA 		0x81 /* struct arb_rec_req */
-#define XMIT_DATA_REQ 		0x82 /* struct arb_xmit_req */
-#define DLC_STATUS 		0x83 /* struct arb_dlc_status */
-#define RING_STAT_CHANGE    	0x84 /* struct dlc_open_sap ??? */
-
-/* DIR_OPEN_ADAPTER options */
-#define OPEN_PASS_BCON_MAC 0x0100
-#define NUM_RCV_BUF 2
-#define RCV_BUF_LEN 1024
-#define DHB_LENGTH 2048
-#define NUM_DHB 2
-#define DLC_MAX_SAP 2
-#define DLC_MAX_STA 1
-
-/* DLC_OPEN_SAP options */
-#define MAX_I_FIELD 0x0088
-#define SAP_OPEN_IND_SAP 0x04
-#define SAP_OPEN_PRIORITY 0x20
-#define SAP_OPEN_STATION_CNT 0x1
-#define XMIT_DIR_FRAME 0x0A
-#define XMIT_UI_FRAME  0x0d
-#define XMIT_XID_CMD   0x0e
-#define XMIT_TEST_CMD  0x11
-
-/* srb close return code */
-#define SIGNAL_LOSS  0x8000
-#define HARD_ERROR   0x4000
-#define XMIT_BEACON  0x1000
-#define LOBE_FAULT   0x0800
-#define AUTO_REMOVAL 0x0400
-#define REMOVE_RECV  0x0100
-#define LOG_OVERFLOW 0x0080
-#define RING_RECOVER 0x0020
-
-struct srb_init_response {
-	unsigned char command;
-	unsigned char init_status;
-	unsigned char init_status_2;
-	unsigned char reserved[3];
-	__u16 bring_up_code;
-	__u16 encoded_address;
-	__u16 level_address;
-	__u16 adapter_address;
-	__u16 parms_address;
-	__u16 mac_address;
-};
-
-struct dir_open_adapter {
-	unsigned char command;
-	char reserved[7];
-	__u16 open_options;
-	unsigned char node_address[6];
-	unsigned char group_address[4];
-	unsigned char funct_address[4];
-	__u16 num_rcv_buf;
-	__u16 rcv_buf_len;
-	__u16 dhb_length;
-	unsigned char num_dhb;
-	char reserved2;
-	unsigned char dlc_max_sap;
-	unsigned char dlc_max_sta;
-	unsigned char dlc_max_gsap;
-	unsigned char dlc_max_gmem;
-	unsigned char dlc_t1_tick_1;
-	unsigned char dlc_t2_tick_1;
-	unsigned char dlc_ti_tick_1;
-	unsigned char dlc_t1_tick_2;
-	unsigned char dlc_t2_tick_2;
-	unsigned char dlc_ti_tick_2;
-	unsigned char product_id[18];
-};
-
-struct dlc_open_sap {
-	unsigned char command;
-	unsigned char reserved1;
-	unsigned char ret_code;
-	unsigned char reserved2;
-	__u16 station_id;
-	unsigned char timer_t1;
-	unsigned char timer_t2;
-	unsigned char timer_ti;
-	unsigned char maxout;
-	unsigned char maxin;
-	unsigned char maxout_incr;
-	unsigned char max_retry_count;
-	unsigned char gsap_max_mem;
-	__u16 max_i_field;
-	unsigned char sap_value;
-	unsigned char sap_options;
-	unsigned char station_count;
-	unsigned char sap_gsap_mem;
-	unsigned char gsap[0];
-};
-
-struct srb_xmit {
-	unsigned char command;
-	unsigned char cmd_corr;
-	unsigned char ret_code;
-	unsigned char reserved1;
-	__u16 station_id;
-};
-
-struct arb_rec_req {
-	unsigned char command;
-	unsigned char reserved1[3];
-	__u16 station_id;
-	__u16 rec_buf_addr;
-	unsigned char lan_hdr_len;
-	unsigned char dlc_hdr_len;
-	__u16 frame_len;
-	unsigned char msg_type;
-};
-
-struct asb_rec {
-	unsigned char command;
-	unsigned char reserved1;
-	unsigned char ret_code;
-	unsigned char reserved2;
-	__u16 station_id;
-	__u16 rec_buf_addr;
-};
-
-struct rec_buf {
-  	unsigned char reserved1[2];
-	__u16 buf_ptr;
-	unsigned char reserved2;
-	unsigned char receive_fs;
-	__u16 buf_len;
-	unsigned char data[0];
-};
-
-struct srb_set_funct_addr {
-	unsigned char command;
-	unsigned char reserved1;
-	unsigned char ret_code;
-	unsigned char reserved2[3];
-	unsigned char funct_address[4];
-};
-
-#endif
diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h
deleted file mode 100644
index fc23aeb0f201..000000000000
--- a/include/linux/if_tr.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Token-Ring IEEE 802.5 interface.
- *
- * Version:	@(#)if_tr.h	0.0	07/11/94
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Donald Becker, <becker@super.org>
- *		Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_TR_H
-#define _LINUX_IF_TR_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>	/* For __be16 */
-
-/* IEEE 802.5 Token-Ring magic constants.  The frame sizes omit the preamble
-   and FCS/CRC (frame check sequence). */
-#define TR_ALEN		6		/* Octets in one token-ring addr */
-#define TR_HLEN 	(sizeof(struct trh_hdr)+sizeof(struct trllc))
-#define AC		0x10
-#define LLC_FRAME 	0x40
-
-/* LLC and SNAP constants */
-#define EXTENDED_SAP 	0xAA
-#define UI_CMD       	0x03
-
-/* This is an Token-Ring frame header. */
-struct trh_hdr {
-	__u8  ac;			/* access control field */
-	__u8  fc;			/* frame control field */
-	__u8  daddr[TR_ALEN];		/* destination address */
-	__u8  saddr[TR_ALEN];		/* source address */
-	__be16 rcf;			/* route control field */
-	__be16 rseg[8];			/* routing registers */
-};
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct trh_hdr *tr_hdr(const struct sk_buff *skb)
-{
-	return (struct trh_hdr *)skb_mac_header(skb);
-}
-#endif
-
-/* This is an Token-Ring LLC structure */
-struct trllc {
-	__u8  dsap;			/* destination SAP */
-	__u8  ssap;			/* source SAP */
-	__u8  llc;			/* LLC control field */
-	__u8  protid[3];		/* protocol id */
-	__be16 ethertype;		/* ether type field */
-};
-
-/* Token-Ring statistics collection data. */
-struct tr_statistics {
-	unsigned long rx_packets;       /* total packets received	*/
-	unsigned long tx_packets;	/* total packets transmitted	*/
-	unsigned long rx_bytes;		/* total bytes received   	*/
-	unsigned long tx_bytes;		/* total bytes transmitted	*/
-	unsigned long rx_errors;	/* bad packets received		*/
-	unsigned long tx_errors;	/* packet transmit problems	*/
-	unsigned long rx_dropped;	/* no space in linux buffers	*/
-	unsigned long tx_dropped;	/* no space available in linux	*/
-	unsigned long multicast;	/* multicast packets received	*/
-	unsigned long transmit_collision;
-
-	/* detailed Token-Ring errors. See IBM Token-Ring Network
-	   Architecture for more info */
-
-	unsigned long line_errors;
-	unsigned long internal_errors;
-	unsigned long burst_errors;
-	unsigned long A_C_errors;
-	unsigned long abort_delimiters;
-	unsigned long lost_frames;
-	unsigned long recv_congest_count;
-	unsigned long frame_copied_errors;
-	unsigned long frequency_errors;
-	unsigned long token_errors;
-	unsigned long dummy1;
-};
-
-/* source routing stuff */
-#define TR_RII 			0x80
-#define TR_RCF_DIR_BIT 		0x80
-#define TR_RCF_LEN_MASK 	0x1f00
-#define TR_RCF_BROADCAST 	0x8000	/* all-routes broadcast */
-#define TR_RCF_LIMITED_BROADCAST 0xC000	/* single-route broadcast */
-#define TR_RCF_FRAME2K 		0x20
-#define TR_RCF_BROADCAST_MASK 	0xC000
-#define TR_MAXRIFLEN 		18
-
-#endif	/* _LINUX_IF_TR_H */
diff --git a/include/linux/trdevice.h b/include/linux/trdevice.h
deleted file mode 100644
index bfc84a7aecc5..000000000000
--- a/include/linux/trdevice.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  NET  is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the Token-ring handlers.
- *
- * Version:	@(#)eth.h	1.0.4	05/13/93
- *
- * Authors:	Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		Relocated to include/linux where it belongs by Alan Cox 
- *							<gw4pts@gw4pts.ampr.org>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- *	WARNING: This move may well be temporary. This file will get merged with others RSN.
- *
- */
-#ifndef _LINUX_TRDEVICE_H
-#define _LINUX_TRDEVICE_H
-
-
-#include <linux/if_tr.h>
-
-#ifdef __KERNEL__
-extern __be16 tr_type_trans(struct sk_buff *skb, struct net_device *dev);
-extern void tr_source_route(struct sk_buff *skb, struct trh_hdr *trh, struct net_device *dev);
-extern struct net_device *alloc_trdev(int sizeof_priv);
-
-#endif
-
-#endif	/* _LINUX_TRDEVICE_H */