summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2006-01-08 13:34:21 -0800
committerGreg Kroah-Hartman <gregkh@suse.de>2006-01-13 16:29:54 -0800
commitffa458c1bd9b6f653008d450f337602f3d52a646 (patch)
tree0e42f7d36790dd7088586b32d9c5290d34b10831 /include
parent8ae12a0d85987dc138f8c944cb78a92bf466cea0 (diff)
downloadlinux-ffa458c1bd9b6f653008d450f337602f3d52a646.tar.gz
linux-ffa458c1bd9b6f653008d450f337602f3d52a646.tar.bz2
linux-ffa458c1bd9b6f653008d450f337602f3d52a646.zip
[PATCH] spi: ads7846 driver
This is a driver for the ADS7846 touchscreen sensor, derived from the corgi_ts and omap_ts drivers. Key differences from those two: - Uses the new SPI framework (minimalist version) - <linux/spi/ads7846.h> abstracts board-specific touchscreen info - Sysfs attributes for the temperature and voltage sensors - Uses fewer ARM-specific IRQ primitives The temperature and voltage sensors show up in sysfs like this: $ pwd /sys/devices/platform/omap-uwire/spi2.0 $ ls bus@ input:event0@ power/ temp1 vbatt driver@ modalias temp0 vaux $ cat modalias ads7846 $ cat temp0 991 $ cat temp1 1177 $ So far only basic testing has been done. There's a fair amount of hardware that uses this sensor, and which also runs Linux, which should eventually be able to use this driver. One portability note may be of special interest. It turns out that not all SPI controllers are happy issuing requests that do things like "write 8 bit command, read 12 bit response". Most of them seem happy to handle various word sizes, so the issue isn't "12 bit response" but rather "different rx and tx write sizes", despite that being a common MicroWire convention. So this version of the driver no longer reads 12 bit native-endian words; it reads 16-bit big-endian responses, then byteswaps them and shifts the results to discard the noise. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'include')
-rw-r--r--include/linux/spi/ads7846.h18
1 files changed, 18 insertions, 0 deletions
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
new file mode 100644
index 000000000000..84a27013d399
--- /dev/null
+++ b/include/linux/spi/ads7846.h
@@ -0,0 +1,18 @@
+/* linux/spi/ads7846.h */
+
+/* Touchscreen characteristics vary between boards and models. The
+ * platform_data for the device's "struct device" holts this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ads7846_platform_data {
+ u16 model; /* 7843, 7845, 7846. */
+ u16 vref_delay_usecs; /* 0 for external vref; etc */
+ u16 x_plate_ohms;
+ u16 y_plate_ohms;
+
+ u16 x_min, x_max;
+ u16 y_min, y_max;
+ u16 pressure_min, pressure_max;
+};
+