net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool.

o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed
  to have a bandwidth of at least this value.
  max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth
  of up to this value.

o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced
  which takes 4 arguments:
  netdev, VF number, min_tx_rate, max_tx_rate

o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler.

o Drivers that currently implement ndo_set_vf_tx_rate should now call
  ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth
  greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet
  implemented by driver.

o If user enters only one of either min_tx_rate or max_tx_rate, then,
  userland should read back the other value from driver and set both
  for IFLA_VF_RATE.
  Drivers that have not yet implemented IFLA_VF_RATE should always
  return min_tx_rate as 0 when read from ip tool.

o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then
  IFLA_VF_RATE should override.

o Idea is to have consistent display of rate values to user.

o Usage example: -

  ./ip link set p4p1 vf 0 rate 900

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

  ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps,
    min_tx_rate 200Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

  ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps,
    min_tx_rate 200Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 32 insertions, 6 deletions

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 9837bebf93ce..d6417464dc66 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -767,8 +767,8 @@ static inline int rtnl_vfinfo_size(const struct net_device *dev,
 		size += num_vfs *
 			(nla_total_size(sizeof(struct ifla_vf_mac)) +
 			 nla_total_size(sizeof(struct ifla_vf_vlan)) +
-			 nla_total_size(sizeof(struct ifla_vf_tx_rate)) +
-			 nla_total_size(sizeof(struct ifla_vf_spoofchk)));
+			 nla_total_size(sizeof(struct ifla_vf_spoofchk)) +
+			 nla_total_size(sizeof(struct ifla_vf_rate)));
 		return size;
 	} else
 		return 0;
@@ -1034,6 +1034,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 			struct ifla_vf_info ivi;
 			struct ifla_vf_mac vf_mac;
 			struct ifla_vf_vlan vf_vlan;
+			struct ifla_vf_rate vf_rate;
 			struct ifla_vf_tx_rate vf_tx_rate;
 			struct ifla_vf_spoofchk vf_spoofchk;
 			struct ifla_vf_link_state vf_linkstate;
@@ -1054,6 +1055,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 				break;
 			vf_mac.vf =
 				vf_vlan.vf =
+				vf_rate.vf =
 				vf_tx_rate.vf =
 				vf_spoofchk.vf =
 				vf_linkstate.vf = ivi.vf;
@@ -1061,7 +1063,9 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 			memcpy(vf_mac.mac, ivi.mac, sizeof(ivi.mac));
 			vf_vlan.vlan = ivi.vlan;
 			vf_vlan.qos = ivi.qos;
-			vf_tx_rate.rate = ivi.tx_rate;
+			vf_tx_rate.rate = ivi.max_tx_rate;
+			vf_rate.min_tx_rate = ivi.min_tx_rate;
+			vf_rate.max_tx_rate = ivi.max_tx_rate;
 			vf_spoofchk.setting = ivi.spoofchk;
 			vf_linkstate.link_state = ivi.linkstate;
 			vf = nla_nest_start(skb, IFLA_VF_INFO);
@@ -1071,6 +1075,8 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 			}
 			if (nla_put(skb, IFLA_VF_MAC, sizeof(vf_mac), &vf_mac) ||
 			    nla_put(skb, IFLA_VF_VLAN, sizeof(vf_vlan), &vf_vlan) ||
+			    nla_put(skb, IFLA_VF_RATE, sizeof(vf_rate),
+				    &vf_rate) ||
 			    nla_put(skb, IFLA_VF_TX_RATE, sizeof(vf_tx_rate),
 				    &vf_tx_rate) ||
 			    nla_put(skb, IFLA_VF_SPOOFCHK, sizeof(vf_spoofchk),
@@ -1177,6 +1183,8 @@ static const struct nla_policy ifla_vf_policy[IFLA_VF_MAX+1] = {
 				    .len = sizeof(struct ifla_vf_tx_rate) },
 	[IFLA_VF_SPOOFCHK]	= { .type = NLA_BINARY,
 				    .len = sizeof(struct ifla_vf_spoofchk) },
+	[IFLA_VF_RATE]		= { .type = NLA_BINARY,
+				    .len = sizeof(struct ifla_vf_rate) },
 };
 
 static const struct nla_policy ifla_port_policy[IFLA_PORT_MAX+1] = {
@@ -1336,11 +1344,29 @@ static int do_setvfinfo(struct net_device *dev, struct nlattr *attr)
 		}
 		case IFLA_VF_TX_RATE: {
 			struct ifla_vf_tx_rate *ivt;
+			struct ifla_vf_info ivf;
 			ivt = nla_data(vf);
 			err = -EOPNOTSUPP;
-			if (ops->ndo_set_vf_tx_rate)
-				err = ops->ndo_set_vf_tx_rate(dev, ivt->vf,
-							      ivt->rate);
+			if (ops->ndo_get_vf_config)
+				err = ops->ndo_get_vf_config(dev, ivt->vf,
+							     &ivf);
+			if (err)
+				break;
+			err = -EOPNOTSUPP;
+			if (ops->ndo_set_vf_rate)
+				err = ops->ndo_set_vf_rate(dev, ivt->vf,
+							   ivf.min_tx_rate,
+							   ivt->rate);
+			break;
+		}
+		case IFLA_VF_RATE: {
+			struct ifla_vf_rate *ivt;
+			ivt = nla_data(vf);
+			err = -EOPNOTSUPP;
+			if (ops->ndo_set_vf_rate)
+				err = ops->ndo_set_vf_rate(dev, ivt->vf,
+							   ivt->min_tx_rate,
+							   ivt->max_tx_rate);
 			break;
 		}
 		case IFLA_VF_SPOOFCHK: {