Merge branch 'RollBall-Hilink-Turris-10G-copper-SFP-support'

Marek Behún says:

====================
RollBall / Hilink / Turris 10G copper SFP support

I am resurrecting my attempt to add support for RollBall / Hilink /
Turris 10G copper SFPs modules.

The modules contain Marvell 88X3310 PHY, which can communicate with
the system via sgmii, 2500base-x, 5gbase-r, 10gbase-r or usxgmii mode.

Some of the patches I've taken from Russell King's net-queue [1]
(with some rebasing).

The important change from my previous attempts are:
- I am including the changes needed to phylink and marvell10g driver,
  so that the 88X3310 PHY is configured to use PHY modes supported by
  the host (the PHY defaults to use 10gbase-r only on host's side)
- I have changed the patch that informs phylib about the interfaces
  supported by the host (patch 5 of this series): it now fills in the
  phydev->host_interfaces member only when connecting a PHY that is
  inside a SFP module. This may change in the future.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

0 files changed, 0 insertions, 0 deletions