diff options
author | Jon Paul Maloy <jon.maloy@ericsson.com> | 2016-06-13 20:46:22 -0400 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2016-06-15 14:06:28 -0700 |
commit | 35c55c9877f8de0ab129fa1a309271d0ecc868b9 (patch) | |
tree | 5c8011a871be5083f1c36bdf4ca6c1e4168390c3 /net/tipc/node.c | |
parent | 7889681f4a6c2148e1245604bac751a1cae8f882 (diff) | |
download | linux-35c55c9877f8de0ab129fa1a309271d0ecc868b9.tar.gz linux-35c55c9877f8de0ab129fa1a309271d0ecc868b9.tar.bz2 linux-35c55c9877f8de0ab129fa1a309271d0ecc868b9.zip |
tipc: add neighbor monitoring framework
TIPC based clusters are by default set up with full-mesh link
connectivity between all nodes. Those links are expected to provide
a short failure detection time, by default set to 1500 ms. Because
of this, the background load for neighbor monitoring in an N-node
cluster increases with a factor N on each node, while the overall
monitoring traffic through the network infrastructure increases at
a ~(N * (N - 1)) rate. Experience has shown that such clusters don't
scale well beyond ~100 nodes unless we significantly increase failure
discovery tolerance.
This commit introduces a framework and an algorithm that drastically
reduces this background load, while basically maintaining the original
failure detection times across the whole cluster. Using this algorithm,
background load will now grow at a rate of ~(2 * sqrt(N)) per node, and
at ~(2 * N * sqrt(N)) in traffic overhead. As an example, each node will
now have to actively monitor 38 neighbors in a 400-node cluster, instead
of as before 399.
This "Overlapping Ring Supervision Algorithm" is completely distributed
and employs no centralized or coordinated state. It goes as follows:
- Each node makes up a linearly ascending, circular list of all its N
known neighbors, based on their TIPC node identity. This algorithm
must be the same on all nodes.
- The node then selects the next M = sqrt(N) - 1 nodes downstream from
itself in the list, and chooses to actively monitor those. This is
called its "local monitoring domain".
- It creates a domain record describing the monitoring domain, and
piggy-backs this in the data area of all neighbor monitoring messages
(LINK_PROTOCOL/STATE) leaving that node. This means that all nodes in
the cluster eventually (default within 400 ms) will learn about
its monitoring domain.
- Whenever a node discovers a change in its local domain, e.g., a node
has been added or has gone down, it creates and sends out a new
version of its node record to inform all neighbors about the change.
- A node receiving a domain record from anybody outside its local domain
matches this against its own list (which may not look the same), and
chooses to not actively monitor those members of the received domain
record that are also present in its own list. Instead, it relies on
indications from the direct monitoring nodes if an indirectly
monitored node has gone up or down. If a node is indicated lost, the
receiving node temporarily activates its own direct monitoring towards
that node in order to confirm, or not, that it is actually gone.
- Since each node is actively monitoring sqrt(N) downstream neighbors,
each node is also actively monitored by the same number of upstream
neighbors. This means that all non-direct monitoring nodes normally
will receive sqrt(N) indications that a node is gone.
- A major drawback with ring monitoring is how it handles failures that
cause massive network partitionings. If both a lost node and all its
direct monitoring neighbors are inside the lost partition, the nodes in
the remaining partition will never receive indications about the loss.
To overcome this, each node also chooses to actively monitor some
nodes outside its local domain. Those nodes are called remote domain
"heads", and are selected in such a way that no node in the cluster
will be more than two direct monitoring hops away. Because of this,
each node, apart from monitoring the member of its local domain, will
also typically monitor sqrt(N) remote head nodes.
- As an optimization, local list status, domain status and domain
records are marked with a generation number. This saves senders from
unnecessarily conveying unaltered domain records, and receivers from
performing unneeded re-adaptations of their node monitoring list, such
as re-assigning domain heads.
- As a measure of caution we have added the possibility to disable the
new algorithm through configuration. We do this by keeping a threshold
value for the cluster size; a cluster that grows beyond this value
will switch from full-mesh to ring monitoring, and vice versa when
it shrinks below the value. This means that if the threshold is set to
a value larger than any anticipated cluster size (default size is 32)
the new algorithm is effectively disabled. A patch set for altering the
threshold value and for listing the table contents will follow shortly.
- This change is fully backwards compatible.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/tipc/node.c')
-rw-r--r-- | net/tipc/node.c | 26 |
1 files changed, 12 insertions, 14 deletions
diff --git a/net/tipc/node.c b/net/tipc/node.c index d6a490f991a4..a3fc0a3f4077 100644 --- a/net/tipc/node.c +++ b/net/tipc/node.c @@ -40,6 +40,7 @@ #include "name_distr.h" #include "socket.h" #include "bcast.h" +#include "monitor.h" #include "discover.h" #include "netlink.h" @@ -205,17 +206,6 @@ u16 tipc_node_get_capabilities(struct net *net, u32 addr) return caps; } -/* - * A trivial power-of-two bitmask technique is used for speed, since this - * operation is done for every incoming TIPC packet. The number of hash table - * entries has been chosen so that no hash chain exceeds 8 nodes and will - * usually be much smaller (typically only a single node). - */ -static unsigned int tipc_hashfn(u32 addr) -{ - return addr & (NODE_HTABLE_SIZE - 1); -} - static void tipc_node_kref_release(struct kref *kref) { struct tipc_node *n = container_of(kref, struct tipc_node, kref); @@ -279,6 +269,7 @@ static void tipc_node_write_unlock(struct tipc_node *n) u32 addr = 0; u32 flags = n->action_flags; u32 link_id = 0; + u32 bearer_id; struct list_head *publ_list; if (likely(!flags)) { @@ -288,6 +279,7 @@ static void tipc_node_write_unlock(struct tipc_node *n) addr = n->addr; link_id = n->link_id; + bearer_id = link_id & 0xffff; publ_list = &n->publ_list; n->action_flags &= ~(TIPC_NOTIFY_NODE_DOWN | TIPC_NOTIFY_NODE_UP | @@ -301,13 +293,16 @@ static void tipc_node_write_unlock(struct tipc_node *n) if (flags & TIPC_NOTIFY_NODE_UP) tipc_named_node_up(net, addr); - if (flags & TIPC_NOTIFY_LINK_UP) + if (flags & TIPC_NOTIFY_LINK_UP) { + tipc_mon_peer_up(net, addr, bearer_id); tipc_nametbl_publish(net, TIPC_LINK_STATE, addr, addr, TIPC_NODE_SCOPE, link_id, addr); - - if (flags & TIPC_NOTIFY_LINK_DOWN) + } + if (flags & TIPC_NOTIFY_LINK_DOWN) { + tipc_mon_peer_down(net, addr, bearer_id); tipc_nametbl_withdraw(net, TIPC_LINK_STATE, addr, link_id, addr); + } } struct tipc_node *tipc_node_create(struct net *net, u32 addr, u16 capabilities) @@ -691,6 +686,7 @@ static void tipc_node_link_down(struct tipc_node *n, int bearer_id, bool delete) struct tipc_link *l = le->link; struct tipc_media_addr *maddr; struct sk_buff_head xmitq; + int old_bearer_id = bearer_id; if (!l) return; @@ -710,6 +706,8 @@ static void tipc_node_link_down(struct tipc_node *n, int bearer_id, bool delete) tipc_link_fsm_evt(l, LINK_RESET_EVT); } tipc_node_write_unlock(n); + if (delete) + tipc_mon_remove_peer(n->net, n->addr, old_bearer_id); tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr); tipc_sk_rcv(n->net, &le->inputq); } |