diff options
| author | Masahiro Yamada <masahiroy@kernel.org> | 2020-06-14 01:50:22 +0900 |
|---|---|---|
| committer | Masahiro Yamada <masahiroy@kernel.org> | 2020-06-14 01:57:21 +0900 |
| commit | a7f7f6248d9740d710fd6bd190293fe5e16410ac (patch) | |
| tree | dc59d36a552f7e25f909f5b2edc83f96c013befa /net | |
| parent | e4a42c82e943b97ce124539fcd7a47445b43fa0d (diff) | |
| download | linux-a7f7f6248d9740d710fd6bd190293fe5e16410ac.tar.gz linux-a7f7f6248d9740d710fd6bd190293fe5e16410ac.tar.bz2 linux-a7f7f6248d9740d710fd6bd190293fe5e16410ac.zip | |
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Diffstat (limited to 'net')
47 files changed, 317 insertions, 317 deletions
diff --git a/net/6lowpan/Kconfig b/net/6lowpan/Kconfig index 4c1f4c0aa58a..d8fc459492b0 100644 --- a/net/6lowpan/Kconfig +++ b/net/6lowpan/Kconfig @@ -2,7 +2,7 @@ menuconfig 6LOWPAN tristate "6LoWPAN Support" depends on IPV6 - ---help--- + help This enables IPv6 over Low power Wireless Personal Area Network - "6LoWPAN" which is supported by IEEE 802.15.4 or Bluetooth stacks. @@ -10,7 +10,7 @@ config 6LOWPAN_DEBUGFS bool "6LoWPAN debugfs support" depends on 6LOWPAN depends on DEBUG_FS - ---help--- + help This enables 6LoWPAN debugfs support. For example to manipulate IPHC context information at runtime. @@ -18,7 +18,7 @@ menuconfig 6LOWPAN_NHC tristate "Next Header and Generic Header Compression Support" depends on 6LOWPAN default y - ---help--- + help Support for next header and generic header compression defined in RFC6282 and RFC7400. @@ -27,78 +27,78 @@ if 6LOWPAN_NHC config 6LOWPAN_NHC_DEST tristate "Destination Options Header Support" default y - ---help--- + help 6LoWPAN IPv6 Destination Options Header compression according to RFC6282. config 6LOWPAN_NHC_FRAGMENT tristate "Fragment Header Support" default y - ---help--- + help 6LoWPAN IPv6 Fragment Header compression according to RFC6282. config 6LOWPAN_NHC_HOP tristate "Hop-by-Hop Options Header Support" default y - ---help--- + help 6LoWPAN IPv6 Hop-by-Hop Options Header compression according to RFC6282. config 6LOWPAN_NHC_IPV6 tristate "IPv6 Header Support" default y - ---help--- + help 6LoWPAN IPv6 Header compression according to RFC6282. config 6LOWPAN_NHC_MOBILITY tristate "Mobility Header Support" default y - ---help--- + help 6LoWPAN IPv6 Mobility Header compression according to RFC6282. config 6LOWPAN_NHC_ROUTING tristate "Routing Header Support" default y - ---help--- + help 6LoWPAN IPv6 Routing Header compression according to RFC6282. config 6LOWPAN_NHC_UDP tristate "UDP Header Support" default y - ---help--- + help 6LoWPAN IPv6 UDP Header compression according to RFC6282. config 6LOWPAN_GHC_EXT_HDR_HOP tristate "GHC Hop-by-Hop Options Header Support" - ---help--- + help 6LoWPAN IPv6 Hop-by-Hop option generic header compression according to RFC7400. config 6LOWPAN_GHC_UDP tristate "GHC UDP Support" - ---help--- + help 6LoWPAN IPv6 UDP generic header compression according to RFC7400. config 6LOWPAN_GHC_ICMPV6 tristate "GHC ICMPv6 Support" - ---help--- + help 6LoWPAN IPv6 ICMPv6 generic header compression according to RFC7400. config 6LOWPAN_GHC_EXT_HDR_DEST tristate "GHC Destination Options Header Support" - ---help--- + help 6LoWPAN IPv6 destination option generic header compression according to RFC7400. config 6LOWPAN_GHC_EXT_HDR_FRAG tristate "GHC Fragmentation Options Header Support" - ---help--- + help 6LoWPAN IPv6 fragmentation option generic header compression according to RFC7400. config 6LOWPAN_GHC_EXT_HDR_ROUTE tristate "GHC Routing Options Header Support" - ---help--- + help 6LoWPAN IPv6 routing option generic header compression according to RFC7400. diff --git a/net/8021q/Kconfig b/net/8021q/Kconfig index 5510b4b90ff0..8bf7a1765b78 100644 --- a/net/8021q/Kconfig +++ b/net/8021q/Kconfig @@ -5,7 +5,7 @@ config VLAN_8021Q tristate "802.1Q/802.1ad VLAN Support" - ---help--- + help Select this and you will be able to create 802.1Q VLAN interfaces on your Ethernet interfaces. 802.1Q VLAN supports almost everything a regular Ethernet interface does, including diff --git a/net/Kconfig b/net/Kconfig index 5c524c6ee75d..d1672280d6a4 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -8,7 +8,7 @@ menuconfig NET select NLATTR select GENERIC_NET_UTILS select BPF - ---help--- + help Unless you really know what you are doing, you should say Y here. The reason is that some programs need kernel networking support even when running on a stand-alone machine that isn't connected to any @@ -70,7 +70,7 @@ source "net/xdp/Kconfig" config INET bool "TCP/IP networking" - ---help--- + help These are the protocols used on the Internet and on most local Ethernets. It is highly recommended to say Y here (this will enlarge your kernel by about 400 KB), since some programs (e.g. the X window @@ -121,7 +121,7 @@ config NETWORK_PHY_TIMESTAMPING menuconfig NETFILTER bool "Network packet filtering framework (Netfilter)" - ---help--- + help Netfilter is a framework for filtering and mangling network packets that pass through your Linux box. @@ -192,7 +192,7 @@ config BRIDGE_NETFILTER depends on NETFILTER_ADVANCED select NETFILTER_FAMILY_BRIDGE select SKB_EXTENSIONS - ---help--- + help Enabling this option will let arptables resp. iptables see bridged ARP resp. IP traffic. If you want a bridging firewall, you probably want this option enabled. @@ -268,7 +268,7 @@ config CGROUP_NET_PRIO bool "Network priority cgroup" depends on CGROUPS select SOCK_CGROUP_DATA - ---help--- + help Cgroup subsystem for use in assigning processes to network priorities on a per-interface basis. @@ -276,7 +276,7 @@ config CGROUP_NET_CLASSID bool "Network classid cgroup" depends on CGROUPS select SOCK_CGROUP_DATA - ---help--- + help Cgroup subsystem for use as general purpose socket classid marker that is being used in cls_cgroup and for netfilter matching. @@ -294,7 +294,7 @@ config BPF_JIT bool "enable BPF Just In Time compiler" depends on HAVE_CBPF_JIT || HAVE_EBPF_JIT depends on MODULES - ---help--- + help Berkeley Packet Filter filtering capabilities are normally handled by an interpreter. This option allows kernel to generate a native code when filter is loaded in memory. This should speedup @@ -312,7 +312,7 @@ config BPF_STREAM_PARSER depends on CGROUP_BPF select STREAM_PARSER select NET_SOCK_MSG - ---help--- + help Enabling this allows a stream parser to be used with BPF_MAP_TYPE_SOCKMAP. @@ -324,7 +324,7 @@ config NET_FLOW_LIMIT bool depends on RPS default y - ---help--- + help The network stack has to drop packets when a receive processing CPU's backlog reaches netdev_max_backlog. If a few out of many active flows generate the vast majority of load, drop their traffic earlier to @@ -337,7 +337,7 @@ menu "Network testing" config NET_PKTGEN tristate "Packet Generator (USE WITH CAUTION)" depends on INET && PROC_FS - ---help--- + help This module will inject preconfigured packets, at a configurable rate, out of a given interface. It is used for network interface stress testing and performance analysis. If you don't understand @@ -352,7 +352,7 @@ config NET_PKTGEN config NET_DROP_MONITOR tristate "Network packet drop alerting service" depends on INET && TRACEPOINTS - ---help--- + help This feature provides an alerting service to userspace in the event that packets are discarded in the network stack. Alerts are broadcast via netlink socket to any listening user space @@ -398,7 +398,7 @@ source "net/ife/Kconfig" config LWTUNNEL bool "Network light weight tunnels" - ---help--- + help This feature provides an infrastructure to support light weight tunnels like mpls. There is no netdevice associated with a light weight tunnel endpoint. Tunnel encapsulation parameters are stored @@ -408,7 +408,7 @@ config LWTUNNEL_BPF bool "Execute BPF program as route nexthop action" depends on LWTUNNEL && INET default y if LWTUNNEL=y - ---help--- + help Allows to run BPF programs as a nexthop action following a route lookup for incoming and outgoing packets. diff --git a/net/atm/Kconfig b/net/atm/Kconfig index e61dcc9f85b2..77343d57ff2a 100644 --- a/net/atm/Kconfig +++ b/net/atm/Kconfig @@ -5,7 +5,7 @@ config ATM tristate "Asynchronous Transfer Mode (ATM)" - ---help--- + help ATM is a high-speed networking technology for Local Area Networks and Wide Area Networks. It uses a fixed packet size and is connection oriented, allowing for the negotiation of minimum diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig index 51a6414145d2..80879196560c 100644 --- a/net/bridge/Kconfig +++ b/net/bridge/Kconfig @@ -8,7 +8,7 @@ config BRIDGE select LLC select STP depends on IPV6 || IPV6=n - ---help--- + help If you say Y here, then your Linux box will be able to act as an Ethernet bridge, which means that the different Ethernet segments it is connected to will appear as one Ethernet to the participants. @@ -39,7 +39,7 @@ config BRIDGE_IGMP_SNOOPING depends on BRIDGE depends on INET default y - ---help--- + help If you say Y here, then the Ethernet bridge will be able selectively forward multicast traffic based on IGMP/MLD traffic received from each port. @@ -53,7 +53,7 @@ config BRIDGE_VLAN_FILTERING depends on BRIDGE depends on VLAN_8021Q default n - ---help--- + help If you say Y here, then the Ethernet bridge will be able selectively receive and forward traffic based on VLAN information in the packet any VLAN information configured on the bridge port or bridge device. diff --git a/net/caif/Kconfig b/net/caif/Kconfig index b7532a79ca7a..87205251cc25 100644 --- a/net/caif/Kconfig +++ b/net/caif/Kconfig @@ -7,7 +7,7 @@ menuconfig CAIF tristate "CAIF support" select CRC_CCITT default n - ---help--- + help The "Communication CPU to Application CPU Interface" (CAIF) is a packet based connection-oriented MUX protocol developed by ST-Ericsson for use with its modems. It is accessed from user space as sockets (PF_CAIF). @@ -26,7 +26,7 @@ config CAIF_DEBUG bool "Enable Debug" depends on CAIF default n - ---help--- + help Enable the inclusion of debug code in the CAIF stack. Be aware that doing this will impact performance. If unsure say N. @@ -35,7 +35,7 @@ config CAIF_NETDEV tristate "CAIF GPRS Network device" depends on CAIF default CAIF - ---help--- + help Say Y if you will be using a CAIF based GPRS network device. This can be either built-in or a loadable module. If you select to build it as a built-in then the main CAIF device must @@ -46,7 +46,7 @@ config CAIF_USB tristate "CAIF USB support" depends on CAIF default n - ---help--- + help Say Y if you are using CAIF over USB CDC NCM. This can be either built-in or a loadable module. If you select to build it as a built-in then the main CAIF device must diff --git a/net/can/Kconfig b/net/can/Kconfig index d77042752457..25436a715db3 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig @@ -6,7 +6,7 @@ menuconfig CAN depends on NET tristate "CAN bus subsystem support" - ---help--- + help Controller Area Network (CAN) is a slow (up to 1Mbit/s) serial communications protocol. Development of the CAN bus started in 1983 at Robert Bosch GmbH, and the protocol was officially @@ -23,7 +23,7 @@ if CAN config CAN_RAW tristate "Raw CAN Protocol (raw access with CAN-ID filtering)" default y - ---help--- + help The raw CAN protocol option offers access to the CAN bus via the BSD socket API. You probably want to use the raw socket in most cases where no higher level protocol is being used. The raw @@ -33,7 +33,7 @@ config CAN_RAW config CAN_BCM tristate "Broadcast Manager CAN Protocol (with content filtering)" default y - ---help--- + help The Broadcast Manager offers content filtering, timeout monitoring, sending of RTR frames, and cyclic CAN messages without permanent user interaction. The BCM can be 'programmed' via the BSD socket API and @@ -45,7 +45,7 @@ config CAN_BCM config CAN_GW tristate "CAN Gateway/Router (with netlink configuration)" default y - ---help--- + help The CAN Gateway/Router is used to route (and modify) CAN frames. It is based on the PF_CAN core infrastructure for msg filtering and msg sending and can optionally modify routed CAN frames on the fly. diff --git a/net/dcb/Kconfig b/net/dcb/Kconfig index 917e6e7b1cac..efee8b9fe1d4 100644 --- a/net/dcb/Kconfig +++ b/net/dcb/Kconfig @@ -2,7 +2,7 @@ config DCB bool "Data Center Bridging support" default n - ---help--- + help This enables support for configuring Data Center Bridging (DCB) features on DCB capable Ethernet adapters via rtnetlink. Say 'Y' if you have a DCB capable Ethernet adapter which supports this diff --git a/net/dccp/Kconfig b/net/dccp/Kconfig index f7c7495677b0..51ac2631fb48 100644 --- a/net/dccp/Kconfig +++ b/net/dccp/Kconfig @@ -2,7 +2,7 @@ menuconfig IP_DCCP tristate "The DCCP Protocol" depends on INET - ---help--- + help Datagram Congestion Control Protocol (RFC 4340) From http://www.ietf.org/rfc/rfc4340.txt: @@ -32,7 +32,7 @@ menu "DCCP Kernel Hacking" config IP_DCCP_DEBUG bool "DCCP debug messages" - ---help--- + help Only use this if you're hacking DCCP. When compiling DCCP as a module, this debugging output can be toggled diff --git a/net/dccp/ccids/Kconfig b/net/dccp/ccids/Kconfig index 4a358e6847a8..4d7771f36eff 100644 --- a/net/dccp/ccids/Kconfig +++ b/net/dccp/ccids/Kconfig @@ -3,7 +3,7 @@ menu "DCCP CCIDs Configuration" config IP_DCCP_CCID2_DEBUG bool "CCID-2 debugging messages" - ---help--- + help Enable CCID-2 specific debugging messages. The debugging output can additionally be toggled by setting the @@ -14,7 +14,7 @@ config IP_DCCP_CCID2_DEBUG config IP_DCCP_CCID3 bool "CCID-3 (TCP-Friendly)" def_bool y if (IP_DCCP = y || IP_DCCP = m) - ---help--- + help CCID-3 denotes TCP-Friendly Rate Control (TFRC), an equation-based rate-controlled congestion control mechanism. TFRC is designed to be reasonably fair when competing for bandwidth with TCP-like flows, @@ -39,7 +39,7 @@ config IP_DCCP_CCID3 config IP_DCCP_CCID3_DEBUG bool "CCID-3 debugging messages" depends on IP_DCCP_CCID3 - ---help--- + help Enable CCID-3 specific debugging messages. The debugging output can additionally be toggled by setting the diff --git a/net/decnet/Kconfig b/net/decnet/Kconfig index 8f98fb2f2ec9..24336bdb1054 100644 --- a/net/decnet/Kconfig +++ b/net/decnet/Kconfig @@ -4,7 +4,7 @@ # config DECNET tristate "DECnet Support" - ---help--- + help The DECnet networking protocol was used in many products made by Digital (now Compaq). It provides reliable stream and sequenced packet communications over which run a variety of services similar @@ -29,7 +29,7 @@ config DECNET_ROUTER bool "DECnet: router support" depends on DECNET select FIB_RULES - ---help--- + help Add support for turning your DECnet Endnode into a level 1 or 2 router. This is an experimental, but functional option. If you do say Y here, then make sure that you also say Y to "Kernel/User diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 739613070d07..d5bc6ac599ef 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -13,7 +13,7 @@ menuconfig NET_DSA select NET_SWITCHDEV select PHYLINK select NET_DEVLINK - ---help--- + help Say Y if you want to enable support for the hardware switches supported by the Distributed Switch Architecture. diff --git a/net/hsr/Kconfig b/net/hsr/Kconfig index 9c58f8763997..8095b034e76e 100644 --- a/net/hsr/Kconfig +++ b/net/hsr/Kconfig @@ -5,7 +5,7 @@ config HSR tristate "High-availability Seamless Redundancy (HSR)" - ---help--- + help If you say Y here, then your Linux box will be able to act as a DANH ("Doubly attached node implementing HSR"). For this to work, your Linux box needs (at least) two physical Ethernet interfaces, diff --git a/net/ieee802154/6lowpan/Kconfig b/net/ieee802154/6lowpan/Kconfig index d1b4655a6d43..e808e4db2678 100644 --- a/net/ieee802154/6lowpan/Kconfig +++ b/net/ieee802154/6lowpan/Kconfig @@ -2,5 +2,5 @@ config IEEE802154_6LOWPAN tristate "6lowpan support over IEEE 802.15.4" depends on 6LOWPAN - ---help--- + help IPv6 compression over IEEE 802.15.4. diff --git a/net/ieee802154/Kconfig b/net/ieee802154/Kconfig index 5dbbc2ca95b4..bcb05ba97686 100644 --- a/net/ieee802154/Kconfig +++ b/net/ieee802154/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig IEEE802154 tristate "IEEE Std 802.15.4 Low-Rate Wireless Personal Area Networks support" - ---help--- + help IEEE Std 802.15.4 defines a low data rate, low power and low complexity short range wireless personal area networks. It was designed to organise networks of sensors, switches, etc automation @@ -15,13 +15,13 @@ if IEEE802154 config IEEE802154_NL802154_EXPERIMENTAL bool "IEEE 802.15.4 experimental netlink support" - ---help--- + help Adds experimental netlink support for nl802154. config IEEE802154_SOCKET tristate "IEEE 802.15.4 socket interface" default y - ---help--- + help Socket interface for IEEE 802.15.4. Contains DGRAM sockets interface for 802.15.4 dataframes. Also RAW socket interface to build MAC header from userspace. diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 23ba5045e3d3..6ecbb0ced177 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -14,7 +14,7 @@ config IP_MULTICAST config IP_ADVANCED_ROUTER bool "IP: advanced router" - ---help--- + help If you intend to run your Linux box mostly as a router, i.e. as a computer that forwards and redistributes network packets, say Y; you will then be presented with several options that allow more precise @@ -56,7 +56,7 @@ config IP_ADVANCED_ROUTER config IP_FIB_TRIE_STATS bool "FIB TRIE statistics" depends on IP_ADVANCED_ROUTER - ---help--- + help Keep track of statistics on structure of FIB TRIE table. Useful for testing and measuring TRIE performance. @@ -64,7 +64,7 @@ config IP_MULTIPLE_TABLES bool "IP: policy routing" depends on IP_ADVANCED_ROUTER select FIB_RULES - ---help--- + help Normally, a router decides what to do with a received packet based solely on the packet's final destination address. If you say Y here, the Linux router will also be able to take the packet's source @@ -117,7 +117,7 @@ config IP_PNP config IP_PNP_DHCP bool "IP: DHCP support" depends on IP_PNP - ---help--- + help If you want your Linux box to mount its whole root file system (the one containing the directory /) from some other computer over the net via NFS and you want the IP address of your computer to be @@ -134,7 +134,7 @@ config IP_PNP_DHCP config IP_PNP_BOOTP bool "IP: BOOTP support" depends on IP_PNP - ---help--- + help If you want your Linux box to mount its whole root file system (the one containing the directory /) from some other computer over the net via NFS and you want the IP address of your computer to be @@ -163,7 +163,7 @@ config NET_IPIP tristate "IP: tunneling" select INET_TUNNEL select NET_IP_TUNNEL - ---help--- + help Tunneling means encapsulating data of one protocol type within another protocol and sending it over a channel that understands the encapsulating protocol. This particular tunneling driver implements @@ -267,7 +267,7 @@ config IP_PIMSM_V2 config SYN_COOKIES bool "IP: TCP syncookie support" - ---help--- + help Normal TCP/IP networking is open to an attack known as "SYN flooding". This denial-of-service attack prevents legitimate remote users from being able to connect to your computer during an ongoing @@ -307,7 +307,7 @@ config NET_IPVTI select INET_TUNNEL select NET_IP_TUNNEL select XFRM - ---help--- + help Tunneling means encapsulating data of one protocol type within another protocol and sending it over a channel that understands the encapsulating protocol. This can be used with xfrm mode tunnel to give @@ -323,7 +323,7 @@ config NET_FOU tristate "IP: Foo (IP protocols) over UDP" select XFRM select NET_UDP_TUNNEL - ---help--- + help Foo over UDP allows any IP protocol to be directly encapsulated over UDP include tunnels (IPIP, GRE, SIT). By encapsulating in UDP network mechanisms and optimizations for UDP (such as ECMP @@ -333,7 +333,7 @@ config NET_FOU_IP_TUNNELS bool "IP: FOU encapsulation of IP tunnels" depends on NET_IPIP || NET_IPGRE || IPV6_SIT select NET_FOU - ---help--- + help Allow configuration of FOU or GUE encapsulation for IP tunnels. When this option is enabled IP tunnels can be configured to use FOU or GUE encapsulation. @@ -345,7 +345,7 @@ config INET_AH select CRYPTO_HMAC select CRYPTO_MD5 select CRYPTO_SHA1 - ---help--- + help Support for IPsec AH. If unsure, say Y. @@ -361,7 +361,7 @@ config INET_ESP select CRYPTO_SHA1 select CRYPTO_DES select CRYPTO_ECHAINIV - ---help--- + help Support for IPsec ESP. If unsure, say Y. @@ -371,7 +371,7 @@ config INET_ESP_OFFLOAD depends on INET_ESP select XFRM_OFFLOAD default n - ---help--- + help Support for ESP transformation offload. This makes sense only if this system really does IPsec and want to do it with high throughput. A typical desktop system does not @@ -395,7 +395,7 @@ config INET_IPCOMP tristate "IP: IPComp transformation" select INET_XFRM_TUNNEL select XFRM_IPCOMP - ---help--- + help Support for IP Payload Compression Protocol (IPComp) (RFC3173), typically needed for IPsec. @@ -413,7 +413,7 @@ config INET_TUNNEL config INET_DIAG tristate "INET: socket monitoring interface" default y - ---help--- + help Support for INET (TCP, DCCP, etc) socket monitoring interface used by native Linux tools such as ss. ss is included in iproute2, currently downloadable at: @@ -430,7 +430,7 @@ config INET_UDP_DIAG tristate "UDP: socket monitoring interface" depends on INET_DIAG && (IPV6 || IPV6=n) default n - ---help--- + help Support for UDP socket monitoring interface used by the ss tool. If unsure, say Y. @@ -438,7 +438,7 @@ config INET_RAW_DIAG tristate "RAW: socket monitoring interface" depends on INET_DIAG && (IPV6 || IPV6=n) default n - ---help--- + help Support for RAW socket monitoring interface used by the ss tool. If unsure, say Y. @@ -446,7 +446,7 @@ config INET_DIAG_DESTROY bool "INET: allow privileged process to administratively close sockets" depends on INET_DIAG default n - ---help--- + help Provides a SOCK_DESTROY operation that allows privileged processes (e.g., a connection manager or a network administration tool such as ss) to close sockets opened by other processes. Closing a socket in @@ -457,7 +457,7 @@ config INET_DIAG_DESTROY menuconfig TCP_CONG_ADVANCED bool "TCP: advanced congestion control" - ---help--- + help Support for selection of various TCP congestion control modules. @@ -471,7 +471,7 @@ if TCP_CONG_ADVANCED config TCP_CONG_BIC tristate "Binary Increase Congestion (BIC) control" default m - ---help--- + help BIC-TCP is a sender-side only change that ensures a linear RTT fairness under large windows while offering both scalability and bounded TCP-friendliness. The protocol combines two schemes @@ -485,7 +485,7 @@ config TCP_CONG_BIC config TCP_CONG_CUBIC tristate "CUBIC TCP" default y - ---help--- + help This is version 2.0 of BIC-TCP which uses a cubic growth function among other techniques. See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf @@ -493,7 +493,7 @@ config TCP_CONG_CUBIC config TCP_CONG_WESTWOOD tristate "TCP Westwood+" default m - ---help--- + help TCP Westwood+ is a sender-side only modification of the TCP Reno protocol stack that optimizes the performance of TCP congestion control. It is based on end-to-end bandwidth estimation to set @@ -507,7 +507,7 @@ config TCP_CONG_WESTWOOD config TCP_CONG_HTCP tristate "H-TCP" default m - ---help--- + help H-TCP is a send-side only modifications of the TCP Reno protocol stack that optimizes the performance of TCP congestion control for high speed network links. It uses a @@ -518,7 +518,7 @@ config TCP_CONG_HTCP config TCP_CONG_HSTCP tristate "High Speed TCP" default n - ---help--- + help Sally Floyd's High Speed TCP (RFC 3649) congestion control. A modification to TCP's congestion control mechanism for use with large congestion windows. A table indicates how much to @@ -528,7 +528,7 @@ config TCP_CONG_HSTCP config TCP_CONG_HYBLA tristate "TCP-Hybla congestion control algorithm" default n - ---help--- + help TCP-Hybla is a sender-side only change that eliminates penalization of long-RTT, large-bandwidth connections, like when satellite legs are involved, especially when sharing a common bottleneck with normal @@ -537,7 +537,7 @@ config TCP_CONG_HYBLA config TCP_CONG_VEGAS tristate "TCP Vegas" default n - ---help--- + help TCP Vegas is a sender-side only change to TCP that anticipates the onset of congestion by estimating the bandwidth. TCP Vegas adjusts the sending rate by modifying the congestion @@ -547,7 +547,7 @@ config TCP_CONG_VEGAS config TCP_CONG_NV tristate "TCP NV" default n - ---help--- + help TCP NV is a follow up to TCP Vegas. It has been modified to deal with 10G networks, measurement noise introduced by LRO, GRO and interrupt coalescence. In addition, it will decrease its cwnd multiplicatively @@ -563,7 +563,7 @@ config TCP_CONG_NV config TCP_CONG_SCALABLE tristate "Scalable TCP" default n - ---help--- + help Scalable TCP is a sender-side only change to TCP which uses a MIMD congestion control algorithm which has some nice scaling properties, though is known to have fairness issues. @@ -572,7 +572,7 @@ config TCP_CONG_SCALABLE config TCP_CONG_LP tristate "TCP Low Priority" default n - ---help--- + help TCP Low Priority (TCP-LP), a distributed algorithm whose goal is to utilize only the excess network bandwidth as compared to the ``fair share`` of bandwidth as targeted by TCP. @@ -581,7 +581,7 @@ config TCP_CONG_LP config TCP_CONG_VENO tristate "TCP Veno" default n - ---help--- + help TCP Veno is a sender-side only enhancement of TCP to obtain better throughput over wireless networks. TCP Veno makes use of state distinguishing to circumvent the difficult judgment of the packet loss @@ -593,7 +593,7 @@ config TCP_CONG_YEAH tristate "YeAH TCP" select TCP_CONG_VEGAS default n - ---help--- + help YeAH-TCP is a sender-side high-speed enabled TCP congestion control algorithm, which uses a mixed loss/delay approach to compute the congestion window. It's design goals target high efficiency, @@ -606,7 +606,7 @@ config TCP_CONG_YEAH config TCP_CONG_ILLINOIS tristate "TCP Illinois" default n - ---help--- + help TCP-Illinois is a sender-side modification of TCP Reno for high speed long delay links. It uses round-trip-time to adjust the alpha and beta parameters to achieve a higher average @@ -618,7 +618,7 @@ config TCP_CONG_ILLINOIS config TCP_CONG_DCTCP tristate "DataCenter TCP (DCTCP)" default n - ---help--- + help DCTCP leverages Explicit Congestion Notification (ECN) in the network to provide multi-bit feedback to the end hosts. It is designed to provide: @@ -639,7 +639,7 @@ config TCP_CONG_DCTCP config TCP_CONG_CDG tristate "CAIA Delay-Gradient (CDG)" default n - ---help--- + help CAIA Delay-Gradient (CDG) is a TCP congestion control that modifies the TCP sender in order to: @@ -655,7 +655,7 @@ config TCP_CONG_CDG config TCP_CONG_BBR tristate "BBR TCP" default n - ---help--- + help BBR (Bottleneck Bandwidth and RTT) TCP congestion control aims to maximize network utilization and minimize queues. It builds an explicit @@ -734,7 +734,7 @@ config TCP_MD5SIG bool "TCP: MD5 Signature Option support (RFC2385)" select CRYPTO select CRYPTO_MD5 - ---help--- + help RFC2385 specifies a method of giving MD5 protection to TCP sessions. Its main (only?) use is to protect BGP sessions between core routers on the Internet. diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index f17b402111ce..a2f4f894be2b 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -94,7 +94,7 @@ config NF_NAT_SNMP_BASIC depends on NETFILTER_ADVANCED default NF_NAT && NF_CONNTRACK_SNMP select ASN1 - ---help--- + help This module implements an Application Layer Gateway (ALG) for SNMP payloads. In conjunction with NAT, it allows a network @@ -146,7 +146,7 @@ config IP_NF_MATCH_ECN tristate '"ecn" match support' depends on NETFILTER_ADVANCED select NETFILTER_XT_MATCH_ECN - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_MATCH_ECN. @@ -155,7 +155,7 @@ config IP_NF_MATCH_RPFILTER tristate '"rpfilter" reverse path filter match support' depends on NETFILTER_ADVANCED depends on IP_NF_MANGLE || IP_NF_RAW - ---help--- + help This option allows you to match packets whose replies would go out via the interface the packet came in. @@ -166,7 +166,7 @@ config IP_NF_MATCH_TTL tristate '"ttl" match support' depends on NETFILTER_ADVANCED select NETFILTER_XT_MATCH_HL - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_MATCH_HL. @@ -234,7 +234,7 @@ config IP_NF_TARGET_NETMAP tristate "NETMAP target support" depends on NETFILTER_ADVANCED select NETFILTER_XT_TARGET_NETMAP - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_TARGET_NETMAP. @@ -243,7 +243,7 @@ config IP_NF_TARGET_REDIRECT tristate "REDIRECT target support" depends on NETFILTER_ADVANCED select NETFILTER_XT_TARGET_REDIRECT - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_TARGET_REDIRECT. @@ -279,7 +279,7 @@ config IP_NF_TARGET_ECN tristate "ECN target support" depends on IP_NF_MANGLE depends on NETFILTER_ADVANCED - ---help--- + help This option adds a `ECN' target, which can be used in the iptables mangle table. @@ -294,7 +294,7 @@ config IP_NF_TARGET_TTL tristate '"TTL" target support' depends on NETFILTER_ADVANCED && IP_NF_MANGLE select NETFILTER_XT_TARGET_HL - ---help--- + help This is a backwards-compatible option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_TARGET_HL. diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index 4f03aece2980..992cf45fb4f6 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -7,7 +7,7 @@ menuconfig IPV6 tristate "The IPv6 protocol" default y - ---help--- + help Support for IP version 6 (IPv6). For general information about IPv6, see @@ -23,7 +23,7 @@ if IPV6 config IPV6_ROUTER_PREF bool "IPv6: Router Preference (RFC 4191) support" - ---help--- + help Router Preference is an optional extension to the Router Advertisement message which improves the ability of hosts to pick an appropriate router, especially when the hosts @@ -34,14 +34,14 @@ config IPV6_ROUTER_PREF config IPV6_ROUTE_INFO bool "IPv6: Route Information (RFC 4191) support" depends on IPV6_ROUTER_PREF - ---help--- + help Support of Route Information. If unsure, say N. config IPV6_OPTIMISTIC_DAD bool "IPv6: Enable RFC 4429 Optimistic DAD" - ---help--- + help Support for optimistic Duplicate Address Detection. It allows for autoconfigured addresses to be used more quickly. @@ -54,7 +54,7 @@ config INET6_AH select CRYPTO_HMAC select CRYPTO_MD5 select CRYPTO_SHA1 - ---help--- + help Support for IPsec AH. If unsure, say Y. @@ -70,7 +70,7 @@ config INET6_ESP select CRYPTO_SHA1 select CRYPTO_DES select CRYPTO_ECHAINIV - ---help--- + help Support for IPsec ESP. If unsure, say Y. @@ -80,7 +80,7 @@ config INET6_ESP_OFFLOAD depends on INET6_ESP select XFRM_OFFLOAD default n - ---help--- + help Support for ESP transformation offload. This makes sense only if this system really does IPsec and want to do it with high throughput. A typical desktop system does not @@ -104,7 +104,7 @@ config INET6_IPCOMP tristate "IPv6: IPComp transformation" select INET6_XFRM_TUNNEL select XFRM_IPCOMP - ---help--- + help Support for IP Payload Compression Protocol (IPComp) (RFC3173), typically needed for IPsec. @@ -113,7 +113,7 @@ config INET6_IPCOMP config IPV6_MIP6 tristate "IPv6: Mobility" select XFRM - ---help--- + help Support for IPv6 Mobility described in RFC 3775. If unsure, say N. @@ -123,7 +123,7 @@ config IPV6_ILA depends on NETFILTER select DST_CACHE select LWTUNNEL - ---help--- + help Support for IPv6 Identifier Locator Addressing (ILA). ILA is a mechanism to do network virtualization without @@ -153,7 +153,7 @@ tristate "Virtual (secure) IPv6: tunneling" select IPV6_TUNNEL select NET_IP_TUNNEL select XFRM - ---help--- + help Tunneling means encapsulating data of one protocol type within another protocol and sending it over a channel that understands the encapsulating protocol. This can be used with xfrm mode tunnel to give @@ -166,7 +166,7 @@ config IPV6_SIT select NET_IP_TUNNEL select IPV6_NDISC_NODETYPE default y - ---help--- + help Tunneling means encapsulating data of one protocol type within another protocol and sending it over a channel that understands the encapsulating protocol. This driver implements encapsulation of IPv6 @@ -179,7 +179,7 @@ config IPV6_SIT_6RD bool "IPv6: IPv6 Rapid Deployment (6RD)" depends on IPV6_SIT default n - ---help--- + help IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides @@ -202,7 +202,7 @@ config IPV6_TUNNEL select INET6_TUNNEL select DST_CACHE select GRO_CELLS - ---help--- + help Support for IPv6-in-IPv6 and IPv4-in-IPv6 tunnels described in RFC 2473. @@ -213,7 +213,7 @@ config IPV6_GRE select IPV6_TUNNEL select NET_IP_TUNNEL depends on NET_IPGRE_DEMUX - ---help--- + help Tunneling means encapsulating data of one protocol type within another protocol and sending it over a channel that understands the encapsulating protocol. This particular tunneling driver implements @@ -238,13 +238,13 @@ config IPV6_FOU_TUNNEL config IPV6_MULTIPLE_TABLES bool "IPv6: Multiple Routing Tables" select FIB_RULES - ---help--- + help Support multiple routing tables. config IPV6_SUBTREES bool "IPv6: source address based routing" depends on IPV6_MULTIPLE_TABLES - ---help--- + help Enable routing by source address or prefix. The destination address is still the primary routing key, so mixing @@ -259,7 +259,7 @@ config IPV6_MROUTE bool "IPv6: multicast routing" depends on IPV6 select IP_MROUTE_COMMON - ---help--- + help Support for IPv6 multicast forwarding. If unsure, say N. @@ -280,7 +280,7 @@ config IPV6_MROUTE_MULTIPLE_TABLES config IPV6_PIMSM_V2 bool "IPv6: PIM-SM version 2 support" depends on IPV6_MROUTE - ---help--- + help Support for IPv6 PIM multicast routing protocol PIM-SMv2. If unsure, say N. @@ -290,7 +290,7 @@ config IPV6_SEG6_LWTUNNEL select LWTUNNEL select DST_CACHE select IPV6_MULTIPLE_TABLES - ---help--- + help Support for encapsulation of packets within an outer IPv6 header and a Segment Routing Header using the lightweight tunnels mechanism. Also enable support for advanced local @@ -304,7 +304,7 @@ config IPV6_SEG6_HMAC select CRYPTO_HMAC select CRYPTO_SHA1 select CRYPTO_SHA256 - ---help--- + help Support for HMAC signature generation and verification of SR-enabled packets. @@ -319,7 +319,7 @@ config IPV6_RPL_LWTUNNEL bool "IPv6: RPL Source Routing Header support" depends on IPV6 select LWTUNNEL - ---help--- + help Support for RFC6554 RPL Source Routing Header using the lightweight tunnels mechanism. diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig index 0594131fa46d..262bb51a2d99 100644 --- a/net/ipv6/netfilter/Kconfig +++ b/net/ipv6/netfilter/Kconfig @@ -127,7 +127,7 @@ config IP6_NF_MATCH_HL tristate '"hl" hoplimit match support' depends on NETFILTER_ADVANCED select NETFILTER_XT_MATCH_HL - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_MATCH_HL. @@ -153,7 +153,7 @@ config IP6_NF_MATCH_RPFILTER tristate '"rpfilter" reverse path filter match support' depends on NETFILTER_ADVANCED depends on IP6_NF_MANGLE || IP6_NF_RAW - ---help--- + help This option allows you to match packets whose replies would go out via the interface the packet came in. @@ -183,7 +183,7 @@ config IP6_NF_TARGET_HL tristate '"HL" hoplimit target support' depends on NETFILTER_ADVANCED && IP6_NF_MANGLE select NETFILTER_XT_TARGET_HL - ---help--- + help This is a backwards-compatible option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_TARGET_HL. diff --git a/net/kcm/Kconfig b/net/kcm/Kconfig index bf7e970fad65..16f39f2565d9 100644 --- a/net/kcm/Kconfig +++ b/net/kcm/Kconfig @@ -5,7 +5,7 @@ config AF_KCM depends on INET select BPF_SYSCALL select STREAM_PARSER - ---help--- + help KCM (Kernel Connection Multiplexor) sockets provide a method for multiplexing messages of a message based application protocol over kernel connectons (e.g. TCP connections). diff --git a/net/l2tp/Kconfig b/net/l2tp/Kconfig index 655e0646895b..b7856748e960 100644 --- a/net/l2tp/Kconfig +++ b/net/l2tp/Kconfig @@ -8,7 +8,7 @@ menuconfig L2TP depends on (IPV6 || IPV6=n) depends on INET select NET_UDP_TUNNEL - ---help--- + help Layer Two Tunneling Protocol From RFC 2661 <http://www.ietf.org/rfc/rfc2661.txt>. diff --git a/net/l3mdev/Kconfig b/net/l3mdev/Kconfig index de186dff8f63..2b2861e1fb7d 100644 --- a/net/l3mdev/Kconfig +++ b/net/l3mdev/Kconfig @@ -6,6 +6,6 @@ config NET_L3_MASTER_DEV bool "L3 Master device support" depends on INET || IPV6 - ---help--- + help This module provides glue between core networking code and device drivers to support L3 master devices like VRF. diff --git a/net/lapb/Kconfig b/net/lapb/Kconfig index 5b50e8d64f26..da87b47f0dff 100644 --- a/net/lapb/Kconfig +++ b/net/lapb/Kconfig @@ -5,7 +5,7 @@ config LAPB tristate "LAPB Data Link Driver" - ---help--- + help Link Access Procedure, Balanced (LAPB) is the data link layer (i.e. the lower) part of the X.25 protocol. It offers a reliable connection service to exchange data frames with one other host, and diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 0c93b1b7a826..cd9a9bd242ba 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -9,7 +9,7 @@ config MAC80211 select CRYPTO_GCM select CRYPTO_CMAC select CRC32 - ---help--- + help This option enables the hardware independent IEEE 802.11 networking stack. @@ -25,14 +25,14 @@ config MAC80211_RC_MINSTREL bool "Minstrel" if EXPERT select MAC80211_HAS_RC default y - ---help--- + help This option enables the 'minstrel' TX rate control algorithm choice prompt "Default rate control algorithm" depends on MAC80211_HAS_RC default MAC80211_RC_DEFAULT_MINSTREL - ---help--- + help This option selects the default rate control algorithm mac80211 will use. Note that this default can still be overridden through the ieee80211_default_rc_algo module @@ -41,7 +41,7 @@ choice config MAC80211_RC_DEFAULT_MINSTREL bool "Minstrel" depends on MAC80211_RC_MINSTREL - ---help--- + help Select Minstrel as the default rate control algorithm. @@ -60,7 +60,7 @@ comment "Some wireless drivers require a rate control algorithm" config MAC80211_MESH bool "Enable mac80211 mesh networking support" depends on MAC80211 - ---help--- + help Select this option to enable 802.11 mesh operation in mac80211 drivers that support it. 802.11 mesh connects multiple stations over (possibly multi-hop) wireless links to form a single logical @@ -71,14 +71,14 @@ config MAC80211_LEDS depends on MAC80211 depends on LEDS_CLASS select LEDS_TRIGGERS - ---help--- + help This option enables a few LED triggers for different packet receive/transmit events. config MAC80211_DEBUGFS bool "Export mac80211 internals in DebugFS" depends on MAC80211 && DEBUG_FS - ---help--- + help Select this to see extensive information about the internal state of mac80211 in debugfs. @@ -87,7 +87,7 @@ config MAC80211_DEBUGFS config MAC80211_MESSAGE_TRACING bool "Trace all mac80211 debug messages" depends on MAC80211 - ---help--- + help Select this option to have mac80211 register the mac80211_msg trace subsystem with tracepoints to collect all debugging messages, independent of @@ -100,13 +100,13 @@ config MAC80211_MESSAGE_TRACING menuconfig MAC80211_DEBUG_MENU bool "Select mac80211 debugging features" depends on MAC80211 - ---help--- + help This option collects various mac80211 debug settings. config MAC80211_NOINLINE bool "Do not inline TX/RX handlers" depends on MAC80211_DEBUG_MENU - ---help--- + help This option affects code generation in mac80211, when selected some functions are marked "noinline" to allow easier debugging of problems in the transmit and receive @@ -122,7 +122,7 @@ config MAC80211_NOINLINE config MAC80211_VERBOSE_DEBUG bool "Verbose debugging output" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out many debugging messages. It should not be selected on production systems as some of the messages are @@ -133,7 +133,7 @@ config MAC80211_VERBOSE_DEBUG config MAC80211_MLME_DEBUG bool "Verbose managed MLME output" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out debugging messages for the managed-mode MLME. It should not be selected on production systems as some @@ -144,7 +144,7 @@ config MAC80211_MLME_DEBUG config MAC80211_STA_DEBUG bool "Verbose station debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out debugging messages for station addition/removal. @@ -153,7 +153,7 @@ config MAC80211_STA_DEBUG config MAC80211_HT_DEBUG bool "Verbose HT debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help This option enables 802.11n High Throughput features debug tracing output. @@ -165,7 +165,7 @@ config MAC80211_HT_DEBUG config MAC80211_OCB_DEBUG bool "Verbose OCB debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose OCB debugging messages. It should not be selected on production systems as those messages @@ -176,7 +176,7 @@ config MAC80211_OCB_DEBUG config MAC80211_IBSS_DEBUG bool "Verbose IBSS debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose IBSS debugging messages. It should not be selected on production systems as those messages @@ -187,7 +187,7 @@ config MAC80211_IBSS_DEBUG config MAC80211_PS_DEBUG bool "Verbose powersave mode debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose power save mode debugging messages (when mac80211 is an AP and has power saving stations.) @@ -200,7 +200,7 @@ config MAC80211_MPL_DEBUG bool "Verbose mesh peer link debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh peer link debugging messages (when mac80211 is taking part in a mesh network). @@ -213,7 +213,7 @@ config MAC80211_MPATH_DEBUG bool "Verbose mesh path debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh path selection debugging messages (when mac80211 is taking part in a mesh network). @@ -226,7 +226,7 @@ config MAC80211_MHWMP_DEBUG bool "Verbose mesh HWMP routing debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh routing (HWMP) debugging messages (when mac80211 is taking part in a mesh network). @@ -239,7 +239,7 @@ config MAC80211_MESH_SYNC_DEBUG bool "Verbose mesh synchronization debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh synchronization debugging messages (when mac80211 is taking part in a mesh network). @@ -250,7 +250,7 @@ config MAC80211_MESH_CSA_DEBUG bool "Verbose mesh channel switch debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh channel switch debugging messages (when mac80211 is taking part in a mesh network). @@ -261,7 +261,7 @@ config MAC80211_MESH_PS_DEBUG bool "Verbose mesh powersave debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh powersave debugging messages (when mac80211 is taking part in a mesh network). @@ -271,7 +271,7 @@ config MAC80211_MESH_PS_DEBUG config MAC80211_TDLS_DEBUG bool "Verbose TDLS debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose TDLS selection debugging messages (when mac80211 is a TDLS STA). @@ -284,7 +284,7 @@ config MAC80211_DEBUG_COUNTERS bool "Extra statistics for TX/RX debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_DEBUGFS - ---help--- + help Selecting this option causes mac80211 to keep additional and very verbose statistics about TX and RX handler use as well as a few selected dot11 counters. These will be @@ -298,7 +298,7 @@ config MAC80211_DEBUG_COUNTERS config MAC80211_STA_HASH_MAX_SIZE int "Station hash table maximum size" if MAC80211_DEBUG_MENU default 0 - ---help--- + help Setting this option to a low value (e.g. 4) allows testing the hash table with collisions relatively deterministically (just connect more stations than the number selected here.) diff --git a/net/mac802154/Kconfig b/net/mac802154/Kconfig index 742624e4f7bb..901167b1e6f5 100644 --- a/net/mac802154/Kconfig +++ b/net/mac802154/Kconfig @@ -8,7 +8,7 @@ config MAC802154 select CRYPTO_CCM select CRYPTO_CTR select CRYPTO_AES - ---help--- + help This option enables the hardware independent IEEE 802.15.4 networking stack for SoftMAC devices (the ones implementing only PHY level of IEEE 802.15.4 standard). diff --git a/net/mpls/Kconfig b/net/mpls/Kconfig index d1ad69b7942a..d672ab72ab12 100644 --- a/net/mpls/Kconfig +++ b/net/mpls/Kconfig @@ -6,7 +6,7 @@ menuconfig MPLS bool "MultiProtocol Label Switching" default n - ---help--- + help MultiProtocol Label Switching routes packets through logical circuits. Originally conceived as a way of routing packets at hardware speeds (before hardware was capable of routing ipv4 packets), @@ -27,13 +27,13 @@ config MPLS_ROUTING tristate "MPLS: routing support" depends on NET_IP_TUNNEL || NET_IP_TUNNEL=n depends on PROC_SYSCTL - ---help--- + help Add support for forwarding of mpls packets. config MPLS_IPTUNNEL tristate "MPLS: IP over MPLS tunnel support" depends on LWTUNNEL && MPLS_ROUTING - ---help--- + help mpls ip tunnel support. endif # MPLS diff --git a/net/ncsi/Kconfig b/net/ncsi/Kconfig index 2f1e5756c03a..93309081f5a4 100644 --- a/net/ncsi/Kconfig +++ b/net/ncsi/Kconfig @@ -6,7 +6,7 @@ config NET_NCSI bool "NCSI interface support" depends on INET - ---help--- + help This module provides NCSI (Network Controller Sideband Interface) support. Enable this only if your system connects to a network device via NCSI and the ethernet driver you're using supports @@ -14,6 +14,6 @@ config NET_NCSI config NCSI_OEM_CMD_GET_MAC bool "Get NCSI OEM MAC Address" depends on NET_NCSI - ---help--- + help This allows to get MAC address from NCSI firmware and set them back to controller. diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 3a3915d2e1ea..0ffe2b8723c4 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -120,7 +120,7 @@ config NF_CONNTRACK_PROCFS bool "Supply CT list in procfs (OBSOLETE)" default y depends on PROC_FS - ---help--- + help This option enables for the list of known conntrack entries to be shown in procfs under net/netfilter/nf_conntrack. This is considered obsolete in favor of using the conntrack(8) @@ -717,7 +717,7 @@ comment "Xtables combined modules" config NETFILTER_XT_MARK tristate 'nfmark target and match support' default m if NETFILTER_ADVANCED=n - ---help--- + help This option adds the "MARK" target and "mark" match. Netfilter mark matching allows you to match packets based on the @@ -733,7 +733,7 @@ config NETFILTER_XT_CONNMARK depends on NF_CONNTRACK depends on NETFILTER_ADVANCED select NF_CONNTRACK_MARK - ---help--- + help This option adds the "CONNMARK" target and "connmark" match. Netfilter allows you to store a mark value per connection (a.k.a. @@ -760,7 +760,7 @@ config NETFILTER_XT_TARGET_AUDIT tristate "AUDIT target support" depends on AUDIT depends on NETFILTER_ADVANCED - ---help--- + help This option adds a 'AUDIT' target, which can be used to create audit records for packets dropped/accepted. @@ -770,7 +770,7 @@ config NETFILTER_XT_TARGET_CHECKSUM tristate "CHECKSUM target support" depends on IP_NF_MANGLE || IP6_NF_MANGLE depends on NETFILTER_ADVANCED - ---help--- + help This option adds a `CHECKSUM' target, which can be used in the iptables mangle table to work around buggy DHCP clients in virtualized environments. @@ -799,7 +799,7 @@ config NETFILTER_XT_TARGET_CONNMARK depends on NF_CONNTRACK depends on NETFILTER_ADVANCED select NETFILTER_XT_CONNMARK - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_CONNMARK (combined connmark/CONNMARK module). @@ -848,7 +848,7 @@ config NETFILTER_XT_TARGET_HL tristate '"HL" hoplimit target support' depends on IP_NF_MANGLE || IP6_NF_MANGLE depends on NETFILTER_ADVANCED - ---help--- + help This option adds the "HL" (for IPv6) and "TTL" (for IPv4) targets, which enable the user to change the hoplimit/time-to-live value of the IP header. @@ -863,7 +863,7 @@ config NETFILTER_XT_TARGET_HMARK tristate '"HMARK" target support' depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n depends on NETFILTER_ADVANCED - ---help--- + help This option adds the "HMARK" target. The target allows you to create rules in the "raw" and "mangle" tables @@ -925,7 +925,7 @@ config NETFILTER_XT_TARGET_MARK tristate '"MARK" target support' depends on NETFILTER_ADVANCED select NETFILTER_XT_MARK - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_MARK (combined mark/MARK module). @@ -933,7 +933,7 @@ config NETFILTER_XT_TARGET_MARK config NETFILTER_XT_NAT tristate '"SNAT and DNAT" targets support' depends on NF_NAT - ---help--- + help This option enables the SNAT and DNAT targets. To compile it as a module, choose M here. If unsure, say N. @@ -941,7 +941,7 @@ config NETFILTER_XT_NAT config NETFILTER_XT_TARGET_NETMAP tristate '"NETMAP" target support' depends on NF_NAT - ---help--- + help NETMAP is an implementation of static 1:1 NAT mapping of network addresses. It maps the network address part, while keeping the host address part intact. @@ -991,7 +991,7 @@ config NETFILTER_XT_TARGET_REDIRECT tristate "REDIRECT target support" depends on NF_NAT select NF_NAT_REDIRECT - ---help--- + help REDIRECT is a special case of NAT: all incoming connections are mapped onto the incoming interface's address, causing the packets to come to the local machine instead of passing through. This is @@ -1021,7 +1021,7 @@ config NETFILTER_XT_TARGET_TEE depends on IP6_NF_IPTABLES || !IP6_NF_IPTABLES select NF_DUP_IPV4 select NF_DUP_IPV6 if IP6_NF_IPTABLES - ---help--- + help This option adds a "TEE" target with which a packet can be cloned and this clone be rerouted to another nexthop. @@ -1073,7 +1073,7 @@ config NETFILTER_XT_TARGET_TCPMSS tristate '"TCPMSS" target support' depends on IPV6 || IPV6=n default m if NETFILTER_ADVANCED=n - ---help--- + help This option adds a `TCPMSS' target, which allows you to alter the MSS value of TCP SYN packets, to control the maximum size for that connection (usually limiting it to your outgoing interface's MTU @@ -1111,7 +1111,7 @@ comment "Xtables matches" config NETFILTER_XT_MATCH_ADDRTYPE tristate '"addrtype" address type match support' default m if NETFILTER_ADVANCED=n - ---help--- + help This option allows you to match what routing thinks of an address, eg. UNICAST, LOCAL, BROADCAST, ... @@ -1132,7 +1132,7 @@ config NETFILTER_XT_MATCH_CGROUP depends on NETFILTER_ADVANCED depends on CGROUPS select CGROUP_NET_CLASSID - ---help--- + help Socket/process control group matching allows you to match locally generated packets based on which net_cls control group processes belong to. @@ -1141,7 +1141,7 @@ config NETFILTER_XT_MATCH_CLUSTER tristate '"cluster" match support' depends on NF_CONNTRACK depends on NETFILTER_ADVANCED - ---help--- + help This option allows you to build work-load-sharing clusters of network servers/stateful firewalls without having a dedicated load-balancing router/server/switch. Basically, this match returns @@ -1179,7 +1179,7 @@ config NETFILTER_XT_MATCH_CONNLABEL select NF_CONNTRACK_LABELS depends on NF_CONNTRACK depends on NETFILTER_ADVANCED - ---help--- + help This match allows you to test and assign userspace-defined labels names to a connection. The kernel only stores bit values - mapping names to bits is done by userspace. @@ -1192,7 +1192,7 @@ config NETFILTER_XT_MATCH_CONNLIMIT depends on NF_CONNTRACK depends on NETFILTER_ADVANCED select NETFILTER_CONNCOUNT - ---help--- + help This match allows you to match against the number of parallel connections to a server per client IP address (or address block). @@ -1201,7 +1201,7 @@ config NETFILTER_XT_MATCH_CONNMARK depends on NF_CONNTRACK depends on NETFILTER_ADVANCED select NETFILTER_XT_CONNMARK - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_CONNMARK (combined connmark/CONNMARK module). @@ -1267,7 +1267,7 @@ config NETFILTER_XT_MATCH_DSCP config NETFILTER_XT_MATCH_ECN tristate '"ecn" match support' depends on NETFILTER_ADVANCED - ---help--- + help This option adds an "ECN" match, which allows you to match against the IPv4 and TCP header ECN fields. @@ -1310,7 +1310,7 @@ config NETFILTER_XT_MATCH_HELPER config NETFILTER_XT_MATCH_HL tristate '"hl" hoplimit/TTL match support' depends on NETFILTER_ADVANCED - ---help--- + help HL matching allows you to match packets based on the hoplimit in the IPv6 header, or the time-to-live field in the IPv4 header of the packet. @@ -1327,7 +1327,7 @@ config NETFILTER_XT_MATCH_IPCOMP config NETFILTER_XT_MATCH_IPRANGE tristate '"iprange" address range match support' depends on NETFILTER_ADVANCED - ---help--- + help This option adds a "iprange" match, which allows you to match based on an IP address range. (Normal iptables only matches on single addresses with an optional mask.) @@ -1348,7 +1348,7 @@ config NETFILTER_XT_MATCH_L2TP tristate '"l2tp" match support' depends on NETFILTER_ADVANCED default L2TP - ---help--- + help This option adds an "L2TP" match, which allows you to match against L2TP protocol header fields. @@ -1386,7 +1386,7 @@ config NETFILTER_XT_MATCH_MARK tristate '"mark" match support' depends on NETFILTER_ADVANCED select NETFILTER_XT_MARK - ---help--- + help This is a backwards-compat option for the user's convenience (e.g. when running oldconfig). It selects CONFIG_NETFILTER_XT_MARK (combined mark/MARK module). @@ -1428,7 +1428,7 @@ config NETFILTER_XT_MATCH_OSF config NETFILTER_XT_MATCH_OWNER tristate '"owner" match support' depends on NETFILTER_ADVANCED - ---help--- + help Socket owner matching allows you to match locally-generated packets based on who created the socket: the user or group. It is also possible to check whether a socket actually exists. @@ -1503,7 +1503,7 @@ config NETFILTER_XT_MATCH_REALM config NETFILTER_XT_MATCH_RECENT tristate '"recent" match support' depends on NETFILTER_ADVANCED - ---help--- + help This match is used for creating one or many lists of recently used addresses and then matching against that/those list(s). @@ -1586,7 +1586,7 @@ config NETFILTER_XT_MATCH_TCPMSS config NETFILTER_XT_MATCH_TIME tristate '"time" match support' depends on NETFILTER_ADVANCED - ---help--- + help This option adds a "time" match, which allows you to match based on the packet arrival time (at the machine which netfilter is running) on) or departure time/date (for locally generated packets). @@ -1600,7 +1600,7 @@ config NETFILTER_XT_MATCH_TIME config NETFILTER_XT_MATCH_U32 tristate '"u32" match support' depends on NETFILTER_ADVANCED - ---help--- + help u32 allows you to extract quantities of up to 4 bytes from a packet, AND them with specified masks, shift them by specified amounts and test whether the results are in any of a set of specified ranges. diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig index 5b672e05d758..2c1593089ede 100644 --- a/net/netfilter/ipvs/Kconfig +++ b/net/netfilter/ipvs/Kconfig @@ -6,7 +6,7 @@ menuconfig IP_VS tristate "IP virtual server support" depends on NET && INET && NETFILTER depends on (NF_CONNTRACK || NF_CONNTRACK=n) - ---help--- + help IP Virtual Server support will let you build a high-performance virtual server based on cluster of two or more real servers. This option must be enabled for at least one of the clustered computers @@ -31,14 +31,14 @@ config IP_VS_IPV6 depends on IPV6 = y || IP_VS = IPV6 select IP6_NF_IPTABLES select NF_DEFRAG_IPV6 - ---help--- + help Add IPv6 support to IPVS. Say Y if unsure. config IP_VS_DEBUG bool "IP virtual server debugging" - ---help--- + help Say Y here if you want to get additional messages useful in debugging the IP virtual server code. You can change the debug level in /proc/sys/net/ipv4/vs/debug_level @@ -47,7 +47,7 @@ config IP_VS_TAB_BITS int "IPVS connection table size (the Nth power of 2)" range 8 20 default 12 - ---help--- + help The IPVS connection hash table uses the chaining scheme to handle hash collisions. Using a big IPVS connection hash table will greatly reduce conflicts when there are hundreds of thousands of connections @@ -78,13 +78,13 @@ comment "IPVS transport protocol load balancing support" config IP_VS_PROTO_TCP bool "TCP load balancing support" - ---help--- + help This option enables support for load balancing TCP transport protocol. Say Y if unsure. config IP_VS_PROTO_UDP bool "UDP load balancing support" - ---help--- + help This option enables support for load balancing UDP transport protocol. Say Y if unsure. @@ -93,20 +93,20 @@ config IP_VS_PROTO_AH_ESP config IP_VS_PROTO_ESP bool "ESP load balancing support" - ---help--- + help This option enables support for load balancing ESP (Encapsulation Security Payload) transport protocol. Say Y if unsure. config IP_VS_PROTO_AH bool "AH load balancing support" - ---help--- + help This option enables support for load balancing AH (Authentication Header) transport protocol. Say Y if unsure. config IP_VS_PROTO_SCTP bool "SCTP load balancing support" select LIBCRC32C - ---help--- + help This option enables support for load balancing SCTP transport protocol. Say Y if unsure. @@ -114,7 +114,7 @@ comment "IPVS scheduler" config IP_VS_RR tristate "round-robin scheduling" - ---help--- + help The robin-robin scheduling algorithm simply directs network connections to different real servers in a round-robin manner. @@ -123,7 +123,7 @@ config IP_VS_RR config IP_VS_WRR tristate "weighted round-robin scheduling" - ---help--- + help The weighted robin-robin scheduling algorithm directs network connections to different real servers based on server weights in a round-robin manner. Servers with higher weights receive @@ -136,7 +136,7 @@ config IP_VS_WRR config IP_VS_LC tristate "least-connection scheduling" - ---help--- + help The least-connection scheduling algorithm directs network connections to the server with the least number of active connections. @@ -146,7 +146,7 @@ config IP_VS_LC config IP_VS_WLC tristate "weighted least-connection scheduling" - ---help--- + help The weighted least-connection scheduling algorithm directs network connections to the server with the least active connections normalized by the server weight. @@ -156,7 +156,7 @@ config IP_VS_WLC config IP_VS_FO tristate "weighted failover scheduling" - ---help--- + help The weighted failover scheduling algorithm directs network connections to the server with the highest weight that is currently available. @@ -166,7 +166,7 @@ config IP_VS_FO config IP_VS_OVF tristate "weighted overflow scheduling" - ---help--- + help The weighted overflow scheduling algorithm directs network connections to the server with the highest weight that is currently available and overflows to the next when active @@ -177,7 +177,7 @@ config IP_VS_OVF config IP_VS_LBLC tristate "locality-based least-connection scheduling" - ---help--- + help The locality-based least-connection scheduling algorithm is for destination IP load balancing. It is usually used in cache cluster. This algorithm usually directs packet destined for an IP address to @@ -191,7 +191,7 @@ config IP_VS_LBLC config IP_VS_LBLCR tristate "locality-based least-connection with replication scheduling" - ---help--- + help The locality-based least-connection with replication scheduling algorithm is also for destination IP load balancing. It is usually used in cache cluster. It differs from the LBLC scheduling @@ -209,7 +209,7 @@ config IP_VS_LBLCR config IP_VS_DH tristate "destination hashing scheduling" - ---help--- + help The destination hashing scheduling algorithm assigns network connections to the servers through looking up a statically assigned hash table by their destination IP addresses. @@ -219,7 +219,7 @@ config IP_VS_DH config IP_VS_SH tristate "source hashing scheduling" - ---help--- + help The source hashing scheduling algorithm assigns network connections to the servers through looking up a statically assigned hash table by their source IP addresses. @@ -229,7 +229,7 @@ config IP_VS_SH config IP_VS_MH tristate "maglev hashing scheduling" - ---help--- + help The maglev consistent hashing scheduling algorithm provides the Google's Maglev hashing algorithm as a IPVS scheduler. It assigns network connections to the servers through looking up a statically @@ -248,7 +248,7 @@ config IP_VS_MH config IP_VS_SED tristate "shortest expected delay scheduling" - ---help--- + help The shortest expected delay scheduling algorithm assigns network connections to the server with the shortest expected delay. The expected delay that the job will experience is (Ci + 1) / Ui if @@ -261,7 +261,7 @@ config IP_VS_SED config IP_VS_NQ tristate "never queue scheduling" - ---help--- + help The never queue scheduling algorithm adopts a two-speed model. When there is an idle server available, the job will be sent to the idle server, instead of waiting for a fast one. When there @@ -278,7 +278,7 @@ config IP_VS_SH_TAB_BITS int "IPVS source hashing table size (the Nth power of 2)" range 4 20 default 8 - ---help--- + help The source hashing scheduler maps source IPs to destinations stored in a hash table. This table is tiled by each destination until all slots in the table are filled. When using weights to @@ -293,7 +293,7 @@ config IP_VS_MH_TAB_INDEX int "IPVS maglev hashing table index of size (the prime numbers)" range 8 17 default 12 - ---help--- + help The maglev hashing scheduler maps source IPs to destinations stored in a hash table. This table is assigned by a preference list of the positions to each destination until all slots in @@ -312,7 +312,7 @@ config IP_VS_FTP depends on IP_VS_PROTO_TCP && NF_CONNTRACK && NF_NAT && \ NF_CONNTRACK_FTP select IP_VS_NFCT - ---help--- + help FTP is a protocol that transfers IP address and/or port number in the payload. In the virtual server via Network Address Translation, the IP address and port number of real servers cannot be sent to @@ -326,7 +326,7 @@ config IP_VS_FTP config IP_VS_NFCT bool "Netfilter connection tracking" depends on NF_CONNTRACK - ---help--- + help The Netfilter connection tracking support allows the IPVS connection state to be exported to the Netfilter framework for filtering purposes. @@ -335,7 +335,7 @@ config IP_VS_PE_SIP tristate "SIP persistence engine" depends on IP_VS_PROTO_UDP depends on NF_CONNTRACK_SIP - ---help--- + help Allow persistence based on the SIP Call-ID endif # IP_VS diff --git a/net/netlabel/Kconfig b/net/netlabel/Kconfig index 07b03c306f28..4383ac29693e 100644 --- a/net/netlabel/Kconfig +++ b/net/netlabel/Kconfig @@ -8,7 +8,7 @@ config NETLABEL depends on SECURITY select CRC_CCITT if IPV6 default n - ---help--- + help NetLabel provides support for explicit network packet labeling protocols such as CIPSO and RIPSO. For more information see Documentation/netlabel as well as the NetLabel SourceForge project diff --git a/net/netlink/Kconfig b/net/netlink/Kconfig index 20f967974da0..1039d4f2ce11 100644 --- a/net/netlink/Kconfig +++ b/net/netlink/Kconfig @@ -6,6 +6,6 @@ config NETLINK_DIAG tristate "NETLINK: socket monitoring interface" default n - ---help--- + help Support for NETLINK socket monitoring interface used by the ss tool. If unsure, say Y. diff --git a/net/nfc/hci/Kconfig b/net/nfc/hci/Kconfig index 4822d6f46947..9500b8a27475 100644 --- a/net/nfc/hci/Kconfig +++ b/net/nfc/hci/Kconfig @@ -13,6 +13,6 @@ config NFC_SHDLC select CRC_CCITT bool "SHDLC link layer for HCI based NFC drivers" default n - ---help--- + help Say yes if you use an NFC HCI driver that requires SHDLC link layer. If unsure, say N here. diff --git a/net/nsh/Kconfig b/net/nsh/Kconfig index 19af948ab6f0..84f2a2823417 100644 --- a/net/nsh/Kconfig +++ b/net/nsh/Kconfig @@ -2,7 +2,7 @@ menuconfig NET_NSH tristate "Network Service Header (NSH) protocol" default n - ---help--- + help Network Service Header is an implementation of Service Function Chaining (RFC 7665). The current implementation in Linux supports only MD type 1 and only with the openvswitch module. diff --git a/net/openvswitch/Kconfig b/net/openvswitch/Kconfig index 22d7d5604b4c..15bd287f5cbd 100644 --- a/net/openvswitch/Kconfig +++ b/net/openvswitch/Kconfig @@ -15,7 +15,7 @@ config OPENVSWITCH select NET_MPLS_GSO select DST_CACHE select NET_NSH - ---help--- + help Open vSwitch is a multilayer Ethernet switch targeted at virtualized environments. In addition to supporting a variety of features expected in a traditional hardware switch, it enables fine-grained @@ -43,7 +43,7 @@ config OPENVSWITCH_GRE depends on OPENVSWITCH depends on NET_IPGRE default OPENVSWITCH - ---help--- + help If you say Y here, then the Open vSwitch will be able create GRE vport. @@ -56,7 +56,7 @@ config OPENVSWITCH_VXLAN depends on OPENVSWITCH depends on VXLAN default OPENVSWITCH - ---help--- + help If you say Y here, then the Open vSwitch will be able create vxlan vport. Say N to exclude this support and reduce the binary size. @@ -68,7 +68,7 @@ config OPENVSWITCH_GENEVE depends on OPENVSWITCH depends on GENEVE default OPENVSWITCH - ---help--- + help If you say Y here, then the Open vSwitch will be able create geneve vport. Say N to exclude this support and reduce the binary size. diff --git a/net/packet/Kconfig b/net/packet/Kconfig index b4abad135294..2997382d597c 100644 --- a/net/packet/Kconfig +++ b/net/packet/Kconfig @@ -5,7 +5,7 @@ config PACKET tristate "Packet socket" - ---help--- + help The Packet protocol is used by applications which communicate directly with network devices without an intermediate network protocol implemented in the kernel, e.g. tcpdump. If you want them @@ -20,6 +20,6 @@ config PACKET_DIAG tristate "Packet: sockets monitoring interface" depends on PACKET default n - ---help--- + help Support for PF_PACKET sockets monitoring interface used by the ss tool. If unsure, say Y. diff --git a/net/qrtr/Kconfig b/net/qrtr/Kconfig index f362ca316015..b4020b84760f 100644 --- a/net/qrtr/Kconfig +++ b/net/qrtr/Kconfig @@ -4,7 +4,7 @@ config QRTR tristate "Qualcomm IPC Router support" - ---help--- + help Say Y if you intend to use Qualcomm IPC router protocol. The protocol is used to communicate with services provided by other hardware blocks in the system. @@ -17,13 +17,13 @@ if QRTR config QRTR_SMD tristate "SMD IPC Router channels" depends on RPMSG || (COMPILE_TEST && RPMSG=n) - ---help--- + help Say Y here to support SMD based ipcrouter channels. SMD is the most common transport for IPC Router. config QRTR_TUN tristate "TUN device for Qualcomm IPC Router" - ---help--- + help Say Y here to expose a character device that allows user space to implement endpoints of QRTR, for purpose of tunneling data to other hosts or testing purposes. diff --git a/net/rds/Kconfig b/net/rds/Kconfig index c64e154bc18f..75cd696963b2 100644 --- a/net/rds/Kconfig +++ b/net/rds/Kconfig @@ -3,14 +3,14 @@ config RDS tristate "The Reliable Datagram Sockets Protocol" depends on INET - ---help--- + help The RDS (Reliable Datagram Sockets) protocol provides reliable, sequenced delivery of datagrams over Infiniband or TCP. config RDS_RDMA tristate "RDS over Infiniband" depends on RDS && INFINIBAND && INFINIBAND_ADDR_TRANS - ---help--- + help Allow RDS to use Infiniband as a transport. This transport supports RDMA operations. @@ -18,7 +18,7 @@ config RDS_TCP tristate "RDS over TCP" depends on RDS depends on IPV6 || !IPV6 - ---help--- + help Allow RDS to use TCP as a transport. This transport does not support RDMA operations. diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 2f20073f4f84..84badf00647e 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -6,7 +6,7 @@ menuconfig NET_SCHED bool "QoS and/or fair queueing" select NET_SCH_FIFO - ---help--- + help When the kernel has several packets to send out over a network device, it has to decide which ones to send first, which ones to delay, and which ones to drop. This is the job of the queueing @@ -47,7 +47,7 @@ comment "Queueing/Scheduling" config NET_SCH_CBQ tristate "Class Based Queueing (CBQ)" - ---help--- + help Say Y here if you want to use the Class-Based Queueing (CBQ) packet scheduling algorithm. This algorithm classifies the waiting packets into a tree-like hierarchy of classes; the leaves of this tree are @@ -64,7 +64,7 @@ config NET_SCH_CBQ config NET_SCH_HTB tristate "Hierarchical Token Bucket (HTB)" - ---help--- + help Say Y here if you want to use the Hierarchical Token Buckets (HTB) packet scheduling algorithm. See <http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and @@ -78,7 +78,7 @@ config NET_SCH_HTB config NET_SCH_HFSC tristate "Hierarchical Fair Service Curve (HFSC)" - ---help--- + help Say Y here if you want to use the Hierarchical Fair Service Curve (HFSC) packet scheduling algorithm. @@ -88,7 +88,7 @@ config NET_SCH_HFSC config NET_SCH_ATM tristate "ATM Virtual Circuits (ATM)" depends on ATM - ---help--- + help Say Y here if you want to use the ATM pseudo-scheduler. This provides a framework for invoking classifiers, which in turn select classes of this queuing discipline. Each class maps @@ -101,7 +101,7 @@ config NET_SCH_ATM config NET_SCH_PRIO tristate "Multi Band Priority Queueing (PRIO)" - ---help--- + help Say Y here if you want to use an n-band priority queue packet scheduler. @@ -110,7 +110,7 @@ config NET_SCH_PRIO config NET_SCH_MULTIQ tristate "Hardware Multiqueue-aware Multi Band Queuing (MULTIQ)" - ---help--- + help Say Y here if you want to use an n-band queue packet scheduler to support devices that have multiple hardware transmit queues. @@ -119,7 +119,7 @@ config NET_SCH_MULTIQ config NET_SCH_RED tristate "Random Early Detection (RED)" - ---help--- + help Say Y here if you want to use the Random Early Detection (RED) packet scheduling algorithm. @@ -130,7 +130,7 @@ config NET_SCH_RED config NET_SCH_SFB tristate "Stochastic Fair Blue (SFB)" - ---help--- + help Say Y here if you want to use the Stochastic Fair Blue (SFB) packet scheduling algorithm. @@ -141,7 +141,7 @@ config NET_SCH_SFB config NET_SCH_SFQ tristate "Stochastic Fairness Queueing (SFQ)" - ---help--- + help Say Y here if you want to use the Stochastic Fairness Queueing (SFQ) packet scheduling algorithm. @@ -152,7 +152,7 @@ config NET_SCH_SFQ config NET_SCH_TEQL tristate "True Link Equalizer (TEQL)" - ---help--- + help Say Y here if you want to use the True Link Equalizer (TLE) packet scheduling algorithm. This queueing discipline allows the combination of several physical devices into one virtual device. @@ -164,7 +164,7 @@ config NET_SCH_TEQL config NET_SCH_TBF tristate "Token Bucket Filter (TBF)" - ---help--- + help Say Y here if you want to use the Token Bucket Filter (TBF) packet scheduling algorithm. @@ -175,7 +175,7 @@ config NET_SCH_TBF config NET_SCH_CBS tristate "Credit Based Shaper (CBS)" - ---help--- + help Say Y here if you want to use the Credit Based Shaper (CBS) packet scheduling algorithm. @@ -208,7 +208,7 @@ config NET_SCH_TAPRIO config NET_SCH_GRED tristate "Generic Random Early Detection (GRED)" - ---help--- + help Say Y here if you want to use the Generic Random Early Detection (GRED) packet scheduling algorithm for some of your network devices (see the top of <file:net/sched/sch_red.c> for details and @@ -219,7 +219,7 @@ config NET_SCH_GRED config NET_SCH_DSMARK tristate "Differentiated Services marker (DSMARK)" - ---help--- + help Say Y if you want to schedule packets according to the Differentiated Services architecture proposed in RFC 2475. Technical information on this method, with pointers to associated @@ -230,7 +230,7 @@ config NET_SCH_DSMARK config NET_SCH_NETEM tristate "Network emulator (NETEM)" - ---help--- + help Say Y if you want to emulate network delay, loss, and packet re-ordering. This is often useful to simulate networks when testing applications or protocols. @@ -384,7 +384,7 @@ config NET_SCH_INGRESS depends on NET_CLS_ACT select NET_INGRESS select NET_EGRESS - ---help--- + help Say Y here if you want to use classifiers for incoming and/or outgoing packets. This qdisc doesn't do anything else besides running classifiers, which can also have actions attached to them. In case of outgoing packets, @@ -398,7 +398,7 @@ config NET_SCH_INGRESS config NET_SCH_PLUG tristate "Plug network traffic until release (PLUG)" - ---help--- + help This queuing discipline allows userspace to plug/unplug a network output queue, using the netlink interface. When it receives an @@ -441,7 +441,7 @@ config NET_SCH_ETS menuconfig NET_SCH_DEFAULT bool "Allow override default queue discipline" - ---help--- + help Support for selection of default queuing discipline. Nearly all users can safely say no here, and the default @@ -492,7 +492,7 @@ config NET_CLS config NET_CLS_BASIC tristate "Elementary classification (BASIC)" select NET_CLS - ---help--- + help Say Y here if you want to be able to classify packets using only extended matches and actions. @@ -502,7 +502,7 @@ config NET_CLS_BASIC config NET_CLS_TCINDEX tristate "Traffic-Control Index (TCINDEX)" select NET_CLS - ---help--- + help Say Y here if you want to be able to classify packets based on traffic control indices. You will want this feature if you want to implement Differentiated Services together with DSMARK. @@ -515,7 +515,7 @@ config NET_CLS_ROUTE4 depends on INET select IP_ROUTE_CLASSID select NET_CLS - ---help--- + help If you say Y here, you will be able to classify packets according to the route table entry they matched. @@ -525,7 +525,7 @@ config NET_CLS_ROUTE4 config NET_CLS_FW tristate "Netfilter mark (FW)" select NET_CLS - ---help--- + help If you say Y here, you will be able to classify packets according to netfilter/firewall marks. @@ -535,7 +535,7 @@ config NET_CLS_FW config NET_CLS_U32 tristate "Universal 32bit comparisons w/ hashing (U32)" select NET_CLS - ---help--- + help Say Y here to be able to classify packets using a universal 32bit pieces based comparison scheme. @@ -545,20 +545,20 @@ config NET_CLS_U32 config CLS_U32_PERF bool "Performance counters support" depends on NET_CLS_U32 - ---help--- + help Say Y here to make u32 gather additional statistics useful for fine tuning u32 classifiers. config CLS_U32_MARK bool "Netfilter marks support" depends on NET_CLS_U32 - ---help--- + help Say Y here to be able to use netfilter marks as u32 key. config NET_CLS_RSVP tristate "IPv4 Resource Reservation Protocol (RSVP)" select NET_CLS - ---help--- + help The Resource Reservation Protocol (RSVP) permits end systems to request a minimum and maximum data flow rate for a connection; this is important for real time data such as streaming sound or video. @@ -572,7 +572,7 @@ config NET_CLS_RSVP config NET_CLS_RSVP6 tristate "IPv6 Resource Reservation Protocol (RSVP6)" select NET_CLS - ---help--- + help The Resource Reservation Protocol (RSVP) permits end systems to request a minimum and maximum data flow rate for a connection; this is important for real time data such as streaming sound or video. @@ -586,7 +586,7 @@ config NET_CLS_RSVP6 config NET_CLS_FLOW tristate "Flow classifier" select NET_CLS - ---help--- + help If you say Y here, you will be able to classify packets based on a configurable combination of packet keys. This is mostly useful in combination with SFQ. @@ -599,7 +599,7 @@ config NET_CLS_CGROUP select NET_CLS select CGROUP_NET_CLASSID depends on CGROUPS - ---help--- + help Say Y here if you want to classify packets based on the control cgroup of their process. @@ -609,7 +609,7 @@ config NET_CLS_CGROUP config NET_CLS_BPF tristate "BPF-based classifier" select NET_CLS - ---help--- + help If you say Y here, you will be able to classify packets based on programmable BPF (JIT'ed) filters as an alternative to ematches. @@ -619,7 +619,7 @@ config NET_CLS_BPF config NET_CLS_FLOWER tristate "Flower classifier" select NET_CLS - ---help--- + help If you say Y here, you will be able to classify packets based on a configurable combination of packet keys and masks. @@ -629,7 +629,7 @@ config NET_CLS_FLOWER config NET_CLS_MATCHALL tristate "Match-all classifier" select NET_CLS - ---help--- + help If you say Y here, you will be able to classify packets based on nothing. Every packet will match. @@ -639,7 +639,7 @@ config NET_CLS_MATCHALL config NET_EMATCH bool "Extended Matches" select NET_CLS - ---help--- + help Say Y here if you want to use extended matches on top of classifiers and select the extended matches below. @@ -653,7 +653,7 @@ config NET_EMATCH_STACK int "Stack size" depends on NET_EMATCH default "32" - ---help--- + help Size of the local stack variable used while evaluating the tree of ematches. Limits the depth of the tree, i.e. the number of encapsulated precedences. Every level requires 4 bytes of additional @@ -662,7 +662,7 @@ config NET_EMATCH_STACK config NET_EMATCH_CMP tristate "Simple packet data comparison" depends on NET_EMATCH - ---help--- + help Say Y here if you want to be able to classify packets based on simple packet data comparisons for 8, 16, and 32bit values. @@ -672,7 +672,7 @@ config NET_EMATCH_CMP config NET_EMATCH_NBYTE tristate "Multi byte comparison" depends on NET_EMATCH - ---help--- + help Say Y here if you want to be able to classify packets based on multiple byte comparisons mainly useful for IPv6 address comparisons. @@ -682,7 +682,7 @@ config NET_EMATCH_NBYTE config NET_EMATCH_U32 tristate "U32 key" depends on NET_EMATCH - ---help--- + help Say Y here if you want to be able to classify packets using the famous u32 key in combination with logic relations. @@ -692,7 +692,7 @@ config NET_EMATCH_U32 config NET_EMATCH_META tristate "Metadata" depends on NET_EMATCH - ---help--- + help Say Y here if you want to be able to classify packets based on metadata such as load average, netfilter attributes, socket attributes and routing decisions. @@ -707,7 +707,7 @@ config NET_EMATCH_TEXT select TEXTSEARCH_KMP select TEXTSEARCH_BM select TEXTSEARCH_FSM - ---help--- + help Say Y here if you want to be able to classify packets based on textsearch comparisons. @@ -717,7 +717,7 @@ config NET_EMATCH_TEXT config NET_EMATCH_CANID tristate "CAN Identifier" depends on NET_EMATCH && (CAN=y || CAN=m) - ---help--- + help Say Y here if you want to be able to classify CAN frames based on CAN Identifier. @@ -727,7 +727,7 @@ config NET_EMATCH_CANID config NET_EMATCH_IPSET tristate "IPset" depends on NET_EMATCH && IP_SET - ---help--- + help Say Y here if you want to be able to classify packets based on ipset membership. @@ -737,7 +737,7 @@ config NET_EMATCH_IPSET config NET_EMATCH_IPT tristate "IPtables Matches" depends on NET_EMATCH && NETFILTER && NETFILTER_XTABLES - ---help--- + help Say Y here to be able to classify packets based on iptables matches. Current supported match is "policy" which allows packet classification @@ -749,7 +749,7 @@ config NET_EMATCH_IPT config NET_CLS_ACT bool "Actions" select NET_CLS - ---help--- + help Say Y here if you want to use traffic control actions. Actions get attached to classifiers and are invoked after a successful classification. They are used to overwrite the classification @@ -761,7 +761,7 @@ config NET_CLS_ACT config NET_ACT_POLICE tristate "Traffic Policing" depends on NET_CLS_ACT - ---help--- + help Say Y here if you want to do traffic policing, i.e. strict bandwidth limiting. This action replaces the existing policing module. @@ -772,7 +772,7 @@ config NET_ACT_POLICE config NET_ACT_GACT tristate "Generic actions" depends on NET_CLS_ACT - ---help--- + help Say Y here to take generic actions such as dropping and accepting packets. @@ -782,13 +782,13 @@ config NET_ACT_GACT config GACT_PROB bool "Probability support" depends on NET_ACT_GACT - ---help--- + help Say Y here to use the generic action randomly or deterministically. config NET_ACT_MIRRED tristate "Redirecting and Mirroring" depends on NET_CLS_ACT - ---help--- + help Say Y here to allow packets to be mirrored or redirected to other devices. @@ -799,7 +799,7 @@ config NET_ACT_SAMPLE tristate "Traffic Sampling" depends on NET_CLS_ACT select PSAMPLE - ---help--- + help Say Y here to allow packet sampling tc action. The packet sample action consists of statistically choosing packets and sampling them using the psample module. @@ -810,7 +810,7 @@ config NET_ACT_SAMPLE config NET_ACT_IPT tristate "IPtables targets" depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES - ---help--- + help Say Y here to be able to invoke iptables targets after successful classification. @@ -820,7 +820,7 @@ config NET_ACT_IPT config NET_ACT_NAT tristate "Stateless NAT" depends on NET_CLS_ACT - ---help--- + help Say Y here to do stateless NAT on IPv4 packets. You should use netfilter for NAT unless you know what you are doing. @@ -830,7 +830,7 @@ config NET_ACT_NAT config NET_ACT_PEDIT tristate "Packet Editing" depends on NET_CLS_ACT - ---help--- + help Say Y here if you want to mangle the content of packets. To compile this code as a module, choose M here: the @@ -839,7 +839,7 @@ config NET_ACT_PEDIT config NET_ACT_SIMP tristate "Simple Example (Debug)" depends on NET_CLS_ACT - ---help--- + help Say Y here to add a simple action for demonstration purposes. It is meant as an example and for debugging purposes. It will print a configured policy string followed by the packet count @@ -853,7 +853,7 @@ config NET_ACT_SIMP config NET_ACT_SKBEDIT tristate "SKB Editing" depends on NET_CLS_ACT - ---help--- + help Say Y here to change skb priority or queue_mapping settings. If unsure, say N. @@ -865,7 +865,7 @@ config NET_ACT_CSUM tristate "Checksum Updating" depends on NET_CLS_ACT && INET select LIBCRC32C - ---help--- + help Say Y here to update some common checksum after some direct packet alterations. @@ -886,7 +886,7 @@ config NET_ACT_MPLS config NET_ACT_VLAN tristate "Vlan manipulation" depends on NET_CLS_ACT - ---help--- + help Say Y here to push or pop vlan headers. If unsure, say N. @@ -897,7 +897,7 @@ config NET_ACT_VLAN config NET_ACT_BPF tristate "BPF based action" depends on NET_CLS_ACT - ---help--- + help Say Y here to execute BPF code on packets. The BPF code will decide if the packet should be dropped or not. @@ -910,7 +910,7 @@ config NET_ACT_CONNMARK tristate "Netfilter Connection Mark Retriever" depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES depends on NF_CONNTRACK && NF_CONNTRACK_MARK - ---help--- + help Say Y here to allow retrieving of conn mark If unsure, say N. @@ -938,7 +938,7 @@ config NET_ACT_CTINFO config NET_ACT_SKBMOD tristate "skb data modification action" depends on NET_CLS_ACT - ---help--- + help Say Y here to allow modification of skb data If unsure, say N. @@ -950,7 +950,7 @@ config NET_ACT_IFE tristate "Inter-FE action based on IETF ForCES InterFE LFB" depends on NET_CLS_ACT select NET_IFE - ---help--- + help Say Y here to allow for sourcing and terminating metadata For details refer to netdev01 paper: "Distributing Linux Traffic Control Classifier-Action Subsystem" @@ -962,7 +962,7 @@ config NET_ACT_IFE config NET_ACT_TUNNEL_KEY tristate "IP tunnel metadata manipulation" depends on NET_CLS_ACT - ---help--- + help Say Y here to set/release ip tunnel metadata. If unsure, say N. diff --git a/net/sctp/Kconfig b/net/sctp/Kconfig index 68934438ee19..39d7fa9569f8 100644 --- a/net/sctp/Kconfig +++ b/net/sctp/Kconfig @@ -11,7 +11,7 @@ menuconfig IP_SCTP select CRYPTO_HMAC select CRYPTO_SHA1 select LIBCRC32C - ---help--- + help Stream Control Transmission Protocol From RFC 2960 <http://www.ietf.org/rfc/rfc2960.txt>. diff --git a/net/smc/Kconfig b/net/smc/Kconfig index f54a70b8da82..1ab3c5a2c5ad 100644 --- a/net/smc/Kconfig +++ b/net/smc/Kconfig @@ -2,7 +2,7 @@ config SMC tristate "SMC socket protocol family" depends on INET && INFINIBAND - ---help--- + help SMC-R provides a "sockets over RDMA" solution making use of RDMA over Converged Ethernet (RoCE) technology to upgrade AF_INET TCP connections transparently. @@ -14,7 +14,7 @@ config SMC config SMC_DIAG tristate "SMC: socket monitoring interface" depends on SMC - ---help--- + help Support for SMC socket monitoring interface used by tools such as smcss. diff --git a/net/switchdev/Kconfig b/net/switchdev/Kconfig index 50f21a657007..18a2d980e11d 100644 --- a/net/switchdev/Kconfig +++ b/net/switchdev/Kconfig @@ -6,7 +6,7 @@ config NET_SWITCHDEV bool "Switch (and switch-ish) device support" depends on INET - ---help--- + help This module provides glue between core networking code and device drivers in order to support hardware switch chips in very generic meaning of the word "switch". This include devices supporting L2/L3 but diff --git a/net/tipc/Kconfig b/net/tipc/Kconfig index 716b61a701a8..9dd780215eef 100644 --- a/net/tipc/Kconfig +++ b/net/tipc/Kconfig @@ -6,7 +6,7 @@ menuconfig TIPC tristate "The TIPC Protocol" depends on INET - ---help--- + help The Transparent Inter Process Communication (TIPC) protocol is specially designed for intra cluster communication. This protocol originates from Ericsson where it has been used in carrier grade @@ -55,6 +55,6 @@ config TIPC_DIAG tristate "TIPC: socket monitoring interface" depends on TIPC default y - ---help--- + help Support for TIPC socket monitoring interface used by ss tool. If unsure, say Y. diff --git a/net/tls/Kconfig b/net/tls/Kconfig index 61ec78521a60..fa0724fd84b4 100644 --- a/net/tls/Kconfig +++ b/net/tls/Kconfig @@ -11,7 +11,7 @@ config TLS select STREAM_PARSER select NET_SOCK_MSG default n - ---help--- + help Enable kernel support for TLS protocol. This allows symmetric encryption handling of the TLS protocol to be done in-kernel. diff --git a/net/unix/Kconfig b/net/unix/Kconfig index a23a5cca9753..b6c4282899ec 100644 --- a/net/unix/Kconfig +++ b/net/unix/Kconfig @@ -5,7 +5,7 @@ config UNIX tristate "Unix domain sockets" - ---help--- + help If you say Y here, you will include support for Unix domain sockets; sockets are the standard Unix mechanism for establishing and accessing network connections. Many commonly used programs such as @@ -29,6 +29,6 @@ config UNIX_DIAG tristate "UNIX: socket monitoring interface" depends on UNIX default n - ---help--- + help Support for UNIX socket monitoring interface used by the ss tool. If unsure, say Y. diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig index 813e93644ae7..e9a712fb2392 100644 --- a/net/wireless/Kconfig +++ b/net/wireless/Kconfig @@ -25,7 +25,7 @@ config CFG80211 # using a different algorithm, though right now they shouldn't # (this is here rather than below to allow it to be a module) select CRYPTO_SHA256 if CFG80211_USE_KERNEL_REGDB_KEYS - ---help--- + help cfg80211 is the Linux wireless LAN (802.11) configuration API. Enable this if you have a wireless device. @@ -71,7 +71,7 @@ config CFG80211_CERTIFICATION_ONUS bool "cfg80211 certification onus" depends on EXPERT default n - ---help--- + help You should disable this option unless you are both capable and willing to ensure your system will remain regulatory compliant with the features available under this option. @@ -124,7 +124,7 @@ config CFG80211_EXTRA_REGDB_KEYDIR config CFG80211_REG_CELLULAR_HINTS bool "cfg80211 regulatory support for cellular base station hints" depends on CFG80211_CERTIFICATION_ONUS - ---help--- + help This option enables support for parsing regulatory hints from cellular base stations. If enabled and at least one driver claims support for parsing cellular base station hints the @@ -137,7 +137,7 @@ config CFG80211_REG_CELLULAR_HINTS config CFG80211_REG_RELAX_NO_IR bool "cfg80211 support for NO_IR relaxation" depends on CFG80211_CERTIFICATION_ONUS - ---help--- + help This option enables support for relaxation of the NO_IR flag for situations that certain regulatory bodies have provided clarifications on how relaxation can occur. This feature has an inherent dependency on @@ -171,7 +171,7 @@ config CFG80211_DEFAULT_PS config CFG80211_DEBUGFS bool "cfg80211 DebugFS entries" depends on DEBUG_FS - ---help--- + help You can enable this if you want debugfs entries for cfg80211. If unsure, say N. @@ -228,7 +228,7 @@ config LIB80211_DEBUG bool "lib80211 debugging messages" depends on LIB80211 default n - ---help--- + help You can enable this if you want verbose debugging messages from lib80211. diff --git a/net/x25/Kconfig b/net/x25/Kconfig index 9f0d58b0b90b..e3ed23245a82 100644 --- a/net/x25/Kconfig +++ b/net/x25/Kconfig @@ -5,7 +5,7 @@ config X25 tristate "CCITT X.25 Packet Layer" - ---help--- + help X.25 is a set of standardized network protocols, similar in scope to frame relay; the one physical line from your box to the X.25 network entry point can carry several logical point-to-point connections diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig index b7fd9c838416..b5d4a1ef04b9 100644 --- a/net/xfrm/Kconfig +++ b/net/xfrm/Kconfig @@ -22,7 +22,7 @@ if INET config XFRM_USER tristate "Transformation user configuration interface" select XFRM_ALGO - ---help--- + help Support for Transformation(XFRM) user configuration interface like IPsec used by native Linux tools. @@ -31,7 +31,7 @@ config XFRM_USER config XFRM_INTERFACE tristate "Transformation virtual interface" depends on XFRM && IPV6 - ---help--- + help This provides a virtual interface to route IPsec traffic. If unsure, say N. @@ -39,7 +39,7 @@ config XFRM_INTERFACE config XFRM_SUB_POLICY bool "Transformation sub policy support" depends on XFRM - ---help--- + help Support sub policy for developers. By using sub policy with main one, two policies can be applied to the same packet at once. Policy which lives shorter time in kernel should be a sub. @@ -49,7 +49,7 @@ config XFRM_SUB_POLICY config XFRM_MIGRATE bool "Transformation migrate database" depends on XFRM - ---help--- + help A feature to update locator(s) of a given IPsec security association dynamically. This feature is required, for instance, in a Mobile IPv6 environment with IPsec configuration @@ -60,7 +60,7 @@ config XFRM_MIGRATE config XFRM_STATISTICS bool "Transformation statistics" depends on XFRM && PROC_FS - ---help--- + help This statistics is not a SNMP/MIB specification but shows statistics about transformation error (or almost error) factor at packet processing for developer. @@ -76,7 +76,7 @@ config XFRM_IPCOMP config NET_KEY tristate "PF_KEY sockets" select XFRM_ALGO - ---help--- + help PF_KEYv2 socket family, compatible to KAME ones. They are required if you are going to use IPsec tools ported from KAME. @@ -87,7 +87,7 @@ config NET_KEY_MIGRATE bool "PF_KEY MIGRATE" depends on NET_KEY select XFRM_MIGRATE - ---help--- + help Add a PF_KEY MIGRATE message to PF_KEYv2 socket family. The PF_KEY MIGRATE message is used to dynamically update locator(s) of a given IPsec security association. |