Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was a calm development cycle. There were an ALSA core extension for
  subformat PCM bits and a few ASoC core changes to support N:M
  mappings, while the most of remaining changes are driver-specific.

  Core:
   - API extensions for properly limiting PCM format bits via subformat
   - Enhanced support for N:M CPU:CODEC mappings in the core and in
     audio-graph-card2

  ASoC:
   - Lots of SOF updates: fallback support to older IPC versions,
     notification on control changes with IPC4. Also supports for ACPI
     parse for the ES83xx driver that reduces quirks.
   - Device tree support for describing parts of the card which can be
     active over suspend (for very low power playback or wake word use
     cases)
   - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
     SM8250, SM8550, SM8650 and X1E80100
   - Drop of Freescale MPC8610 code that is no longer supported

  HD-audio:
   - More CS35L41 codec extensions for Dell, HP and Lenovo models
   - TAS2781 codec extensions for Lenovo and co
   - New PCM subformat supports

  Others:
   - More enhancement for Scarlett2 USB mixer support
   - Various kselftest fixes"

* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
  kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
  kselftest/alsa - mixer-test: Fix the print format specifier warning
  kselftest/alsa - mixer-test: Fix the print format specifier warning
  kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
  ALSA: hda/tas2781: annotate calibration data endianness
  ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
  ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
  ALSA: ac97: fix build regression
  ALSA: hda: cs35l41: Support more HP models without _DSD
  ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
  ALSA: hda/tas2781: add TAS2563 support for 14ARB7
  ALSA: hda/tas2781: add configurable global i2c address
  ALSA: hda/tas2781: add ptrs to calibration functions
  ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
  ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
  ALSA: hda/tas2781: configure the amp after firmware load
  ALSA: mark all struct bus_type as const
  ASoC: pxa: sspa: Don't select SND_ARM
  ASoC: rt5663: cancel the work when system suspends
  ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
  ...

1 files changed, 25 insertions, 33 deletions

diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c
index df6195778c57..e738326e33ed 100644
--- a/sound/soc/codecs/wm8996.c
+++ b/sound/soc/codecs/wm8996.c
@@ -14,7 +14,7 @@
 #include <linux/pm.h>
 #include <linux/gcd.h>
 #include <linux/gpio/driver.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -51,7 +51,7 @@ struct wm8996_priv {
 	struct regmap *regmap;
 	struct snd_soc_component *component;
 
-	int ldo1ena;
+	struct gpio_desc *ldo_ena;
 
 	int sysclk;
 	int sysclk_src;
@@ -1596,9 +1596,9 @@ static int wm8996_set_bias_level(struct snd_soc_component *component,
 				return ret;
 			}
 
-			if (wm8996->pdata.ldo_ena >= 0) {
-				gpio_set_value_cansleep(wm8996->pdata.ldo_ena,
-							1);
+			if (wm8996->ldo_ena) {
+				gpiod_set_value_cansleep(wm8996->ldo_ena,
+							 1);
 				msleep(5);
 			}
 
@@ -1615,8 +1615,8 @@ static int wm8996_set_bias_level(struct snd_soc_component *component,
 
 	case SND_SOC_BIAS_OFF:
 		regcache_cache_only(wm8996->regmap, true);
-		if (wm8996->pdata.ldo_ena >= 0) {
-			gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
+		if (wm8996->ldo_ena) {
+			gpiod_set_value_cansleep(wm8996->ldo_ena, 0);
 			regcache_cache_only(wm8996->regmap, true);
 		}
 		regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies),
@@ -2188,6 +2188,8 @@ static const struct gpio_chip wm8996_template_chip = {
 	.direction_input	= wm8996_gpio_direction_in,
 	.get			= wm8996_gpio_get,
 	.can_sleep		= 1,
+	.ngpio			= 5,
+	.base			= -1,
 };
 
 static void wm8996_init_gpio(struct wm8996_priv *wm8996)
@@ -2195,14 +2197,8 @@ static void wm8996_init_gpio(struct wm8996_priv *wm8996)
 	int ret;
 
 	wm8996->gpio_chip = wm8996_template_chip;
-	wm8996->gpio_chip.ngpio = 5;
 	wm8996->gpio_chip.parent = wm8996->dev;
 
-	if (wm8996->pdata.gpio_base)
-		wm8996->gpio_chip.base = wm8996->pdata.gpio_base;
-	else
-		wm8996->gpio_chip.base = -1;
-
 	ret = gpiochip_add_data(&wm8996->gpio_chip, wm8996);
 	if (ret != 0)
 		dev_err(wm8996->dev, "Failed to add GPIOs: %d\n", ret);
@@ -2771,15 +2767,15 @@ static int wm8996_i2c_probe(struct i2c_client *i2c)
 		memcpy(&wm8996->pdata, dev_get_platdata(&i2c->dev),
 		       sizeof(wm8996->pdata));
 
-	if (wm8996->pdata.ldo_ena > 0) {
-		ret = gpio_request_one(wm8996->pdata.ldo_ena,
-				       GPIOF_OUT_INIT_LOW, "WM8996 ENA");
-		if (ret < 0) {
-			dev_err(&i2c->dev, "Failed to request GPIO %d: %d\n",
-				wm8996->pdata.ldo_ena, ret);
-			goto err;
-		}
+	wm8996->ldo_ena = devm_gpiod_get_optional(&i2c->dev, "wlf,ldo1ena",
+						  GPIOD_OUT_LOW);
+	if (IS_ERR(wm8996->ldo_ena)) {
+		ret = PTR_ERR(wm8996->ldo_ena);
+		dev_err(&i2c->dev, "Failed to request LDO ENA GPIO: %d\n",
+			ret);
+		goto err;
 	}
+	gpiod_set_consumer_name(wm8996->ldo_ena, "WM8996 ENA");
 
 	for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
 		wm8996->supplies[i].supply = wm8996_supply_names[i];
@@ -2814,8 +2810,8 @@ static int wm8996_i2c_probe(struct i2c_client *i2c)
 		goto err_gpio;
 	}
 
-	if (wm8996->pdata.ldo_ena > 0) {
-		gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 1);
+	if (wm8996->ldo_ena) {
+		gpiod_set_value_cansleep(wm8996->ldo_ena, 1);
 		msleep(5);
 	}
 
@@ -2847,8 +2843,8 @@ static int wm8996_i2c_probe(struct i2c_client *i2c)
 	dev_info(&i2c->dev, "revision %c\n",
 		 (reg & WM8996_CHIP_REV_MASK) + 'A');
 
-	if (wm8996->pdata.ldo_ena > 0) {
-		gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
+	if (wm8996->ldo_ena) {
+		gpiod_set_value_cansleep(wm8996->ldo_ena, 0);
 		regcache_cache_only(wm8996->regmap, true);
 	} else {
 		ret = regmap_write(wm8996->regmap, WM8996_SOFTWARE_RESET,
@@ -3054,12 +3050,10 @@ err_gpiolib:
 	wm8996_free_gpio(wm8996);
 err_regmap:
 err_enable:
-	if (wm8996->pdata.ldo_ena > 0)
-		gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
+	if (wm8996->ldo_ena)
+		gpiod_set_value_cansleep(wm8996->ldo_ena, 0);
 	regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
 err_gpio:
-	if (wm8996->pdata.ldo_ena > 0)
-		gpio_free(wm8996->pdata.ldo_ena);
 err:
 
 	return ret;
@@ -3070,10 +3064,8 @@ static void wm8996_i2c_remove(struct i2c_client *client)
 	struct wm8996_priv *wm8996 = i2c_get_clientdata(client);
 
 	wm8996_free_gpio(wm8996);
-	if (wm8996->pdata.ldo_ena > 0) {
-		gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
-		gpio_free(wm8996->pdata.ldo_ena);
-	}
+	if (wm8996->ldo_ena)
+		gpiod_set_value_cansleep(wm8996->ldo_ena, 0);
 }
 
 static const struct i2c_device_id wm8996_i2c_id[] = {