diff options
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 11 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 11 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 11 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 34 |
4 files changed, 64 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index ae4c23a4fe65..30e3e769d2b4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -14,6 +14,17 @@ compatible = "google,lazor-rev0", "qcom,sc7180"; }; +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +}; + &sn65dsi86_out { /* * Lane 0 was incorrectly mapped on the cable, but we've now decided diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index 9354d4c5ef7d..c2ef06367baf 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -13,3 +13,14 @@ model = "Google Lazor (rev1 - 2)"; compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; }; + +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 59d67fb0efe8..2cb522d6962e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -53,6 +53,17 @@ ap_ts_pen_1v8: &i2c4 { }; }; +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +}; + &sdhc_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index e9b1182b3715..8ed7dd39f6e3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -191,6 +191,24 @@ vin-supply = <&pp3300_a>; }; + pp3300_hub: pp3300-hub { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_a>; + }; + /* BOARD-SPECIFIC TOP LEVEL NODES */ backlight: backlight { @@ -495,13 +513,10 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp3300_hub: pp3300_l7c: ldo7 { regulator-min-microvolt = <3304000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; - regulator-boot-on; }; pp1800_brij_vccio: @@ -1221,6 +1236,19 @@ ap_spi_fp: &spi10 { }; }; + en_pp3300_hub: en-pp3300-hub { + pinmux { + pins = "gpio84"; + function = "gpio"; + }; + + pinconf { + pins = "gpio84"; + drive-strength = <2>; + bias-disable; + }; + }; + fpmcu_boot0: fpmcu-boot0 { pinmux { pins = "gpio10"; |