diff options
-rw-r--r-- | arch/arm/boot/dts/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91sam9261ek.dts | 211 |
2 files changed, 213 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ce58477cfa33..c8aea260bd05 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb +# sam9261 +dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb # sam9263 dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts new file mode 100644 index 000000000000..2ce527e70c7a --- /dev/null +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -0,0 +1,211 @@ +/* + * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board + * + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> + * + * Licensed under GPLv2 only. + */ +/dts-v1/; +#include "at91sam9261.dtsi" + +/ { + model = "Atmel at91sam9261ek"; + compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + usb0: ohci@00500000 { + status = "okay"; + }; + + fb0: fb@0x00600000 { + display = <&display0>; + atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + atmel,lcd-wiring-mode = "BRG"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + spi0: spi@fffc8000 { + cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>; + status = "okay"; + + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <0>; + spi-max-frequency = <15000000>; + }; + + tsc2046@0 { + reg = <2>; + compatible = "ti,ads7843"; + interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; + spi-max-frequency = <3000000>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + + ti,x-min = /bits/ 16 <150>; + ti,x-max = /bits/ 16 <3830>; + ti,y-min = /bits/ 16 <190>; + ti,y-max = /bits/ 16 <3830>; + ti,vref-delay-usecs = /bits/ 16 <450>; + ti,x-plate-ohms = /bits/ 16 <450>; + ti,y-plate-ohms = /bits/ 16 <250>; + ti,pressure-max = /bits/ 16 <15000>; + ti,debounce-rep = /bits/ 16 <0>; + ti,debounce-tol = /bits/ 16 <65535>; + ti,debounce-max = /bits/ 16 <1>; + + linux,wakeup; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + }; + }; + + leds { + compatible = "gpio-leds"; + + ds8 { + label = "ds8"; + gpios = <&pioA 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + ds7 { + label = "ds7"; + gpios = <&pioA 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "nand-disk"; + }; + + ds1 { + label = "ds1"; + gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button_0 { + label = "button_0"; + gpios = <&pioA 27 GPIO_ACTIVE_LOW>; + linux,code = <256>; + gpio-key,wakeup; + }; + + button_1 { + label = "button_1"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + linux,code = <257>; + gpio-key,wakeup; + }; + + button_2 { + label = "button_2"; + gpios = <&pioA 25 GPIO_ACTIVE_LOW>; + linux,code = <258>; + gpio-key,wakeup; + }; + + button_3 { + label = "button_3"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + linux,code = <259>; + gpio-key,wakeup; + }; + }; +}; |