diff options
| -rw-r--r-- | drivers/usb/dwc3/dwc3-am62.c | 28 |
1 files changed, 18 insertions, 10 deletions
diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c index 859b48279658..b22fb78bc8e7 100644 --- a/drivers/usb/dwc3/dwc3-am62.c +++ b/drivers/usb/dwc3/dwc3-am62.c @@ -60,6 +60,13 @@ #define USBSS_WAKEUP_CFG_SESSVALID_EN BIT(1) #define USBSS_WAKEUP_CFG_VBUSVALID_EN BIT(0) +#define USBSS_WAKEUP_CFG_ALL (USBSS_WAKEUP_CFG_VBUSVALID_EN | \ + USBSS_WAKEUP_CFG_SESSVALID_EN | \ + USBSS_WAKEUP_CFG_LINESTATE_EN | \ + USBSS_WAKEUP_CFG_OVERCURRENT_EN) + +#define USBSS_WAKEUP_CFG_NONE 0 + /* WAKEUP STAT register bits */ #define USBSS_WAKEUP_STAT_OVERCURRENT BIT(4) #define USBSS_WAKEUP_STAT_LINESTATE BIT(3) @@ -103,6 +110,7 @@ struct dwc3_data { struct regmap *syscon; unsigned int offset; unsigned int vbus_divider; + u32 wakeup_stat; }; static const int dwc3_ti_rate_table[] = { /* in KHZ */ @@ -302,12 +310,17 @@ static int dwc3_ti_suspend_common(struct device *dev) /* Set wakeup config enable bits */ reg = dwc3_ti_readl(data, USBSS_WAKEUP_CONFIG); if (current_prtcap_dir == DWC3_GCTL_PRTCAP_HOST) { - reg |= USBSS_WAKEUP_CFG_LINESTATE_EN | USBSS_WAKEUP_CFG_OVERCURRENT_EN; + reg = USBSS_WAKEUP_CFG_LINESTATE_EN | USBSS_WAKEUP_CFG_OVERCURRENT_EN; } else { - reg |= USBSS_WAKEUP_CFG_OVERCURRENT_EN | USBSS_WAKEUP_CFG_LINESTATE_EN | - USBSS_WAKEUP_CFG_VBUSVALID_EN; + reg = USBSS_WAKEUP_CFG_VBUSVALID_EN | USBSS_WAKEUP_CFG_SESSVALID_EN; + /* + * Enable LINESTATE wake up only if connected to bus + * and in U2/L3 state else it causes spurious wake-up. + */ } dwc3_ti_writel(data, USBSS_WAKEUP_CONFIG, reg); + /* clear wakeup status so we know what caused the wake up */ + dwc3_ti_writel(data, USBSS_WAKEUP_STAT, USBSS_WAKEUP_STAT_CLR); } clk_disable_unprepare(data->usb2_refclk); @@ -324,16 +337,11 @@ static int dwc3_ti_resume_common(struct device *dev) if (device_may_wakeup(dev)) { /* Clear wakeup config enable bits */ - reg = dwc3_ti_readl(data, USBSS_WAKEUP_CONFIG); - reg &= ~(USBSS_WAKEUP_CFG_OVERCURRENT_EN | USBSS_WAKEUP_CFG_LINESTATE_EN | - USBSS_WAKEUP_CFG_VBUSVALID_EN); - dwc3_ti_writel(data, USBSS_WAKEUP_CONFIG, reg); + dwc3_ti_writel(data, USBSS_WAKEUP_CONFIG, USBSS_WAKEUP_CFG_NONE); } reg = dwc3_ti_readl(data, USBSS_WAKEUP_STAT); - /* Clear the wakeup status with wakeup clear bit */ - reg |= USBSS_WAKEUP_STAT_CLR; - dwc3_ti_writel(data, USBSS_WAKEUP_STAT, reg); + data->wakeup_stat = reg; return 0; } |