summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-platform.txt18
-rw-r--r--Documentation/devicetree/bindings/ata/sata_highbank.txt44
-rw-r--r--drivers/ata/ahci.c8
-rw-r--r--drivers/ata/libata-acpi.c278
-rw-r--r--drivers/ata/libata-core.c29
-rw-r--r--drivers/ata/libata-scsi.c38
-rw-r--r--drivers/ata/libata-transport.c2
-rw-r--r--drivers/ata/libata-zpodd.c12
-rw-r--r--drivers/ata/libata.h19
-rw-r--r--drivers/ata/pata_acpi.c4
-rw-r--r--drivers/ata/pata_arasan_cf.c4
-rw-r--r--drivers/ata/pata_at32.c2
-rw-r--r--drivers/ata/pata_at91.c2
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c4
-rw-r--r--drivers/ata/pata_octeon_cf.c2
-rw-r--r--drivers/ata/pata_platform.c2
-rw-r--r--drivers/ata/pata_pxa.c2
-rw-r--r--drivers/ata/pata_samsung_cf.c10
-rw-r--r--drivers/ata/sata_highbank.c74
-rw-r--r--drivers/ata/sata_mv.c26
-rw-r--r--drivers/ata/sata_rcar.c5
-rw-r--r--drivers/scsi/scsi_lib.c22
-rw-r--r--include/linux/ata.h123
-rw-r--r--include/linux/libata.h120
24 files changed, 423 insertions, 427 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 3ec0c5c4f0e9..89de1564950c 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
-- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
+- compatible : compatible list, contains "snps,spear-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
Optional properties:
-- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
- SATA port to a combophy and a lane within that
- combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
- which indicates that the driver supports SGPIO
- indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
- SGPIO bitstream.
- dma-coherent : Present if dma operations are coherent
Example:
sata@ffe08000 {
- compatible = "calxeda,hb-ahci";
- reg = <0xffe08000 0x1000>;
- interrupts = <115>;
- calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
- &combophy0 2 &combophy0 3>;
+ compatible = "snps,spear-ahci";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
};
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
new file mode 100644
index 000000000000..aa83407cb7a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt
@@ -0,0 +1,44 @@
+* Calxeda AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+The Calxeda SATA controller mostly conforms to the AHCI interface
+with some special extensions to add functionality.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "calxeda,hb-ahci"
+- interrupts : <interrupt mapping for SATA IRQ>
+- reg : <registers mapping>
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent
+- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
+ SATA port to a combophy and a lane within that
+ combophy
+- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
+ which indicates that the driver supports SGPIO
+ indicator lights using the indicated GPIOs
+- calxeda,led-order : a u32 array that map port numbers to offsets within the
+ SGPIO bitstream.
+- calxeda,tx-atten : a u32 array that contains TX attenuation override
+ codes, one per port. The upper 3 bytes are always
+ 0 and thus ignored.
+- calxeda,pre-clocks : a u32 that indicates the number of additional clock
+ cycles to transmit before sending an SGPIO pattern
+- calxeda,post-clocks: a u32 that indicates the number of additional clock
+ cycles to transmit after sending an SGPIO pattern
+
+Example:
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ dma-coherent;
+ calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
+ &combophy0 2 &combophy0 3>;
+ calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+ calxeda,led-order = <4 0 1 2 3>;
+ calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
+ calxeda,pre-clocks = <10>;
+ calxeda,post-clocks = <0>;
+ };
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index db4380d70031..9d715ae5ff6b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1295,6 +1295,14 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
if (!(hpriv->flags & AHCI_HFLAG_NO_FPDMA_AA))
pi.flags |= ATA_FLAG_FPDMA_AA;
+
+ /*
+ * All AHCI controllers should be forward-compatible
+ * with the new auxiliary field. This code should be
+ * conditionalized if any buggy AHCI controllers are
+ * encountered.
+ */
+ pi.flags |= ATA_FLAG_FPDMA_AUX;
}
if (hpriv->cap & HOST_CAP_PMP)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index da8170dfc90f..4ba8b0405572 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -34,14 +34,6 @@ struct ata_acpi_gtf {
u8 tf[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
} __packed;
-/*
- * Helper - belongs in the PCI layer somewhere eventually
- */
-static int is_pci_dev(struct device *dev)
-{
- return (dev->bus == &pci_bus_type);
-}
-
static void ata_acpi_clear_gtf(struct ata_device *dev)
{
kfree(dev->gtf_cache);
@@ -49,47 +41,18 @@ static void ata_acpi_clear_gtf(struct ata_device *dev)
}
/**
- * ata_ap_acpi_handle - provide the acpi_handle for an ata_port
- * @ap: the acpi_handle returned will correspond to this port
- *
- * Returns the acpi_handle for the ACPI namespace object corresponding to
- * the ata_port passed into the function, or NULL if no such object exists
- */
-acpi_handle ata_ap_acpi_handle(struct ata_port *ap)
-{
- if (ap->flags & ATA_FLAG_ACPI_SATA)
- return NULL;
-
- return ap->scsi_host ?
- DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev) : NULL;
-}
-EXPORT_SYMBOL(ata_ap_acpi_handle);
-
-/**
* ata_dev_acpi_handle - provide the acpi_handle for an ata_device
- * @dev: the acpi_device returned will correspond to this port
+ * @dev: the acpi_handle returned will correspond to this device
*
* Returns the acpi_handle for the ACPI namespace object corresponding to
* the ata_device passed into the function, or NULL if no such object exists
+ * or ACPI is disabled for this device due to consecutive errors.
*/
acpi_handle ata_dev_acpi_handle(struct ata_device *dev)
{
- acpi_integer adr;
- struct ata_port *ap = dev->link->ap;
-
- if (libata_noacpi || dev->flags & ATA_DFLAG_ACPI_DISABLED)
- return NULL;
-
- if (ap->flags & ATA_FLAG_ACPI_SATA) {
- if (!sata_pmp_attached(ap))
- adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
- else
- adr = SATA_ADR(ap->port_no, dev->link->pmp);
- return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), adr);
- } else
- return acpi_get_child(ata_ap_acpi_handle(ap), dev->devno);
+ return dev->flags & ATA_DFLAG_ACPI_DISABLED ?
+ NULL : ACPI_HANDLE(&dev->tdev);
}
-EXPORT_SYMBOL(ata_dev_acpi_handle);
/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
@@ -156,10 +119,8 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
spin_unlock_irqrestore(ap->lock, flags);
- if (wait) {
+ if (wait)
ata_port_wait_eh(ap);
- flush_work(&ap->hotplug_task.work);
- }
}
static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
@@ -216,37 +177,55 @@ static const struct acpi_dock_ops ata_acpi_ap_dock_ops = {
.uevent = ata_acpi_ap_uevent,
};
-void ata_acpi_hotplug_init(struct ata_host *host)
+/* bind acpi handle to pata port */
+void ata_acpi_bind_port(struct ata_port *ap)
{
- int i;
+ acpi_handle host_handle = ACPI_HANDLE(ap->host->dev);
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
- acpi_handle handle;
- struct ata_device *dev;
+ if (libata_noacpi || ap->flags & ATA_FLAG_ACPI_SATA || !host_handle)
+ return;
- if (!ap)
- continue;
+ ACPI_HANDLE_SET(&ap->tdev, acpi_get_child(host_handle, ap->port_no));
- handle = ata_ap_acpi_handle(ap);
- if (handle) {
- /* we might be on a docking station */
- register_hotplug_dock_device(handle,
- &ata_acpi_ap_dock_ops, ap,
- NULL, NULL);
- }
+ if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
+ ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
- ata_for_each_dev(dev, &ap->link, ALL) {
- handle = ata_dev_acpi_handle(dev);
- if (!handle)
- continue;
+ /* we might be on a docking station */
+ register_hotplug_dock_device(ACPI_HANDLE(&ap->tdev),
+ &ata_acpi_ap_dock_ops, ap, NULL, NULL);
+}
- /* we might be on a docking station */
- register_hotplug_dock_device(handle,
- &ata_acpi_dev_dock_ops,
- dev, NULL, NULL);
- }
+void ata_acpi_bind_dev(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+ acpi_handle port_handle = ACPI_HANDLE(&ap->tdev);
+ acpi_handle host_handle = ACPI_HANDLE(ap->host->dev);
+ acpi_handle parent_handle;
+ u64 adr;
+
+ /*
+ * For both sata/pata devices, host handle is required.
+ * For pata device, port handle is also required.
+ */
+ if (libata_noacpi || !host_handle ||
+ (!(ap->flags & ATA_FLAG_ACPI_SATA) && !port_handle))
+ return;
+
+ if (ap->flags & ATA_FLAG_ACPI_SATA) {
+ if (!sata_pmp_attached(ap))
+ adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
+ else
+ adr = SATA_ADR(ap->port_no, dev->link->pmp);
+ parent_handle = host_handle;
+ } else {
+ adr = dev->devno;
+ parent_handle = port_handle;
}
+
+ ACPI_HANDLE_SET(&dev->tdev, acpi_get_child(parent_handle, adr));
+
+ register_hotplug_dock_device(ata_dev_acpi_handle(dev),
+ &ata_acpi_dev_dock_ops, dev, NULL, NULL);
}
/**
@@ -270,18 +249,34 @@ void ata_acpi_dissociate(struct ata_host *host)
struct ata_port *ap = host->ports[i];
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
- if (ata_ap_acpi_handle(ap) && gtm)
+ if (ACPI_HANDLE(&ap->tdev) && gtm)
ata_acpi_stm(ap, gtm);
}
}
-static int __ata_acpi_gtm(struct ata_port *ap, acpi_handle handle,
- struct ata_acpi_gtm *gtm)
+/**
+ * ata_acpi_gtm - execute _GTM
+ * @ap: target ATA port
+ * @gtm: out parameter for _GTM result
+ *
+ * Evaluate _GTM and store the result in @gtm.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure.
+ */
+int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm)
{
struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER };
union acpi_object *out_obj;
acpi_status status;
int rc = 0;
+ acpi_handle handle = ACPI_HANDLE(&ap->tdev);
+
+ if (!handle)
+ return -EINVAL;
status = acpi_evaluate_object(handle, "_GTM", NULL, &output);
@@ -317,27 +312,6 @@ static int __ata_acpi_gtm(struct ata_port *ap, acpi_handle handle,
return rc;
}
-/**
- * ata_acpi_gtm - execute _GTM
- * @ap: target ATA port
- * @gtm: out parameter for _GTM result
- *
- * Evaluate _GTM and store the result in @gtm.
- *
- * LOCKING:
- * EH context.
- *
- * RETURNS:
- * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure.
- */
-int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm)
-{
- if (ata_ap_acpi_handle(ap))
- return __ata_acpi_gtm(ap, ata_ap_acpi_handle(ap), gtm);
- else
- return -EINVAL;
-}
-
EXPORT_SYMBOL_GPL(ata_acpi_gtm);
/**
@@ -374,8 +348,8 @@ int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm)
input.count = 3;
input.pointer = in_params;
- status = acpi_evaluate_object(ata_ap_acpi_handle(ap), "_STM", &input,
- NULL);
+ status = acpi_evaluate_object(ACPI_HANDLE(&ap->tdev), "_STM",
+ &input, NULL);
if (status == AE_NOT_FOUND)
return -ENOENT;
@@ -850,7 +824,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
struct ata_device *dev;
- if (ata_ap_acpi_handle(ap) && gtm) {
+ if (ACPI_HANDLE(&ap->tdev) && gtm) {
/* _GTM valid */
/* restore timing parameters */
@@ -894,8 +868,7 @@ static int ata_acpi_choose_suspend_state(struct ata_device *dev, bool runtime)
d_max_in = ACPI_STATE_D3_HOT;
out:
- return acpi_pm_device_sleep_state(&dev->sdev->sdev_gendev,
- NULL, d_max_in);
+ return acpi_pm_device_sleep_state(&dev->tdev, NULL, d_max_in);
}
static void sata_acpi_set_state(struct ata_port *ap, pm_message_t state)
@@ -932,7 +905,7 @@ static void pata_acpi_set_state(struct ata_port *ap, pm_message_t state)
struct ata_device *dev;
acpi_handle port_handle;
- port_handle = ata_ap_acpi_handle(ap);
+ port_handle = ACPI_HANDLE(&ap->tdev);
if (!port_handle)
return;
@@ -1063,109 +1036,16 @@ void ata_acpi_on_disable(struct ata_device *dev)
ata_acpi_clear_gtf(dev);
}
-static int compat_pci_ata(struct ata_port *ap)
-{
- struct device *dev = ap->tdev.parent;
- struct pci_dev *pdev;
-
- if (!is_pci_dev(dev))
- return 0;
-
- pdev = to_pci_dev(dev);
-
- if ((pdev->class >> 8) != PCI_CLASS_STORAGE_SATA &&
- (pdev->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return 0;
-
- return 1;
-}
-
-static int ata_acpi_bind_host(struct ata_port *ap, acpi_handle *handle)
-{
- if (libata_noacpi || ap->flags & ATA_FLAG_ACPI_SATA)
- return -ENODEV;
-
- *handle = acpi_get_child(DEVICE_ACPI_HANDLE(ap->tdev.parent),
- ap->port_no);
-
- if (!*handle)
- return -ENODEV;
-
- if (__ata_acpi_gtm(ap, *handle, &ap->__acpi_init_gtm) == 0)
- ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
-
- return 0;
-}
-
-static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev,
- acpi_handle *handle)
-{
- struct ata_device *ata_dev;
-
- if (ap->flags & ATA_FLAG_ACPI_SATA) {
- if (!sata_pmp_attached(ap))
- ata_dev = &ap->link.device[sdev->id];
- else
- ata_dev = &ap->pmp_link[sdev->channel].device[sdev->id];
- }
- else {
- ata_dev = &ap->link.device[sdev->id];
- }
-
- *handle = ata_dev_acpi_handle(ata_dev);
-
- if (!*handle)
- return -ENODEV;
-
- return 0;
-}
-
-static int is_ata_port(const struct device *dev)
-{
- return dev->type == &ata_port_type;
-}
-
-static struct ata_port *dev_to_ata_port(struct device *dev)
-{
- while (!is_ata_port(dev)) {
- if (!dev->parent)
- return NULL;
- dev = dev->parent;
- }
- return to_ata_port(dev);
-}
-
-static int ata_acpi_find_device(struct device *dev, acpi_handle *handle)
-{
- struct ata_port *ap = dev_to_ata_port(dev);
-
- if (!ap)
- return -ENODEV;
-
- if (!compat_pci_ata(ap))
- return -ENODEV;
-
- if (scsi_is_host_device(dev))
- return ata_acpi_bind_host(ap, handle);
- else if (scsi_is_sdev_device(dev)) {
- struct scsi_device *sdev = to_scsi_device(dev);
-
- return ata_acpi_bind_device(ap, sdev, handle);
- } else
- return -ENODEV;
-}
-
-static struct acpi_bus_type ata_acpi_bus = {
- .name = "ATA",
- .find_device = ata_acpi_find_device,
-};
-
-int ata_acpi_register(void)
+void ata_scsi_acpi_bind(struct ata_device *dev)
{
- return scsi_register_acpi_bus_type(&ata_acpi_bus);
+ acpi_handle handle = ata_dev_acpi_handle(dev);
+ if (handle)
+ acpi_dev_pm_add_dependent(handle, &dev->sdev->sdev_gendev);
}
-void ata_acpi_unregister(void)
+void ata_scsi_acpi_unbind(struct ata_device *dev)
{
- scsi_unregister_acpi_bus_type(&ata_acpi_bus);
+ acpi_handle handle = ata_dev_acpi_handle(dev);
+ if (handle)
+ acpi_dev_pm_remove_dependent(handle, &dev->sdev->sdev_gendev);
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c24354d44f3d..83b1a9fb2d44 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -569,10 +569,10 @@ void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis)
fis[14] = 0;
fis[15] = tf->ctl;
- fis[16] = 0;
- fis[17] = 0;
- fis[18] = 0;
- fis[19] = 0;
+ fis[16] = tf->auxiliary & 0xff;
+ fis[17] = (tf->auxiliary >> 8) & 0xff;
+ fis[18] = (tf->auxiliary >> 16) & 0xff;
+ fis[19] = (tf->auxiliary >> 24) & 0xff;
}
/**
@@ -2139,6 +2139,22 @@ static int ata_dev_config_ncq(struct ata_device *dev,
else
snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
ddepth, aa_desc);
+
+ if ((ap->flags & ATA_FLAG_FPDMA_AUX) &&
+ ata_id_has_ncq_send_and_recv(dev->id)) {
+ err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV,
+ 0, ap->sector_buf, 1);
+ if (err_mask) {
+ ata_dev_dbg(dev,
+ "failed to get NCQ Send/Recv Log Emask 0x%x\n",
+ err_mask);
+ } else {
+ dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
+ memcpy(dev->ncq_send_recv_cmds, ap->sector_buf,
+ ATA_LOG_NCQ_SEND_RECV_SIZE);
+ }
+ }
+
return 0;
}
@@ -6150,8 +6166,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
if (rc)
goto err_tadd;
- ata_acpi_hotplug_init(host);
-
/* set cable, sata_spd_limit and report */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
@@ -6632,8 +6646,6 @@ static int __init ata_init(void)
ata_parse_force_param();
- ata_acpi_register();
-
rc = ata_sff_init();
if (rc) {
kfree(ata_force_tbl);
@@ -6660,7 +6672,6 @@ static void __exit ata_exit(void)
ata_release_transport(ata_scsi_transport_template);
libata_transport_exit();
ata_sff_exit();
- ata_acpi_unregister();
kfree(ata_force_tbl);
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b1e880a3c3da..97a0cef12959 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -49,7 +49,6 @@
#include <linux/hdreg.h>
#include <linux/uaccess.h>
#include <linux/suspend.h>
-#include <linux/pm_qos.h>
#include <asm/unaligned.h>
#include "libata.h"
@@ -3100,12 +3099,25 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
buf = page_address(sg_page(scsi_sglist(scmd)));
size = ata_set_lba_range_entries(buf, 512, block, n_block);
- tf->protocol = ATA_PROT_DMA;
- tf->hob_feature = 0;
- tf->feature = ATA_DSM_TRIM;
- tf->hob_nsect = (size / 512) >> 8;
- tf->nsect = size / 512;
- tf->command = ATA_CMD_DSM;
+ if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
+ /* Newer devices support queued TRIM commands */
+ tf->protocol = ATA_PROT_NCQ;
+ tf->command = ATA_CMD_FPDMA_SEND;
+ tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
+ tf->nsect = qc->tag << 3;
+ tf->hob_feature = (size / 512) >> 8;
+ tf->feature = size / 512;
+
+ tf->auxiliary = 1;
+ } else {
+ tf->protocol = ATA_PROT_DMA;
+ tf->hob_feature = 0;
+ tf->feature = ATA_DSM_TRIM;
+ tf->hob_nsect = (size / 512) >> 8;
+ tf->nsect = size / 512;
+ tf->command = ATA_CMD_DSM;
+ }
+
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
ATA_TFLAG_WRITE;
@@ -3667,9 +3679,7 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
if (!IS_ERR(sdev)) {
dev->sdev = sdev;
scsi_device_put(sdev);
- if (zpodd_dev_enabled(dev))
- dev_pm_qos_expose_flags(
- &sdev->sdev_gendev, 0);
+ ata_scsi_acpi_bind(dev);
} else {
dev->sdev = NULL;
}
@@ -3757,6 +3767,8 @@ static void ata_scsi_remove_dev(struct ata_device *dev)
struct scsi_device *sdev;
unsigned long flags;
+ ata_scsi_acpi_unbind(dev);
+
/* Alas, we need to grab scan_mutex to ensure SCSI device
* state doesn't change underneath us and thus
* scsi_device_get() always succeeds. The mutex locking can
@@ -3766,9 +3778,6 @@ static void ata_scsi_remove_dev(struct ata_device *dev)
mutex_lock(&ap->scsi_host->scan_mutex);
spin_lock_irqsave(ap->lock, flags);
- if (zpodd_dev_enabled(dev))
- zpodd_exit(dev);
-
/* clearing dev->sdev is protected by host lock */
sdev = dev->sdev;
dev->sdev = NULL;
@@ -3818,6 +3827,9 @@ static void ata_scsi_handle_link_detach(struct ata_link *link)
dev->flags &= ~ATA_DFLAG_DETACHED;
spin_unlock_irqrestore(ap->lock, flags);
+ if (zpodd_dev_enabled(dev))
+ zpodd_exit(dev);
+
ata_scsi_remove_dev(dev);
}
}
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index 077a856f5fd0..150a917f0c3c 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -287,6 +287,7 @@ int ata_tport_add(struct device *parent,
dev->release = ata_tport_release;
dev_set_name(dev, "ata%d", ap->print_id);
transport_setup_device(dev);
+ ata_acpi_bind_port(ap);
error = device_add(dev);
if (error) {
goto tport_err;
@@ -644,6 +645,7 @@ static int ata_tdev_add(struct ata_device *ata_dev)
dev_set_name(dev, "dev%d.%d.0", ap->print_id, link->pmp);
transport_setup_device(dev);
+ ata_acpi_bind_dev(ata_dev);
error = device_add(dev);
if (error) {
ata_tdev_free(ata_dev);
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index cd8daf47188b..68f9e3293e9c 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -2,6 +2,7 @@
#include <linux/cdrom.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
+#include <linux/pm_qos.h>
#include <scsi/scsi_device.h>
#include "libata.h"
@@ -190,8 +191,8 @@ void zpodd_enable_run_wake(struct ata_device *dev)
sdev_disable_disk_events(dev->sdev);
zpodd->powered_off = true;
- device_set_run_wake(&dev->sdev->sdev_gendev, true);
- acpi_pm_device_run_wake(&dev->sdev->sdev_gendev, true);
+ device_set_run_wake(&dev->tdev, true);
+ acpi_pm_device_run_wake(&dev->tdev, true);
}
/* Disable runtime wake capability if it is enabled */
@@ -200,8 +201,8 @@ void zpodd_disable_run_wake(struct ata_device *dev)
struct zpodd *zpodd = dev->zpodd;
if (zpodd->powered_off) {
- acpi_pm_device_run_wake(&dev->sdev->sdev_gendev, false);
- device_set_run_wake(&dev->sdev->sdev_gendev, false);
+ acpi_pm_device_run_wake(&dev->tdev, false);
+ device_set_run_wake(&dev->tdev, false);
}
}
@@ -262,7 +263,7 @@ static void ata_acpi_add_pm_notifier(struct ata_device *dev)
static void ata_acpi_remove_pm_notifier(struct ata_device *dev)
{
- acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->sdev->sdev_gendev);
+ acpi_handle handle = ata_dev_acpi_handle(dev);
acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, zpodd_wake_dev);
}
@@ -290,6 +291,7 @@ void zpodd_init(struct ata_device *dev)
ata_acpi_add_pm_notifier(dev);
zpodd->dev = dev;
dev->zpodd = zpodd;
+ dev_pm_qos_expose_flags(&dev->tdev, 0);
}
void zpodd_exit(struct ata_device *dev)
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 577d902bc4de..eeeb77845d48 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -118,11 +118,11 @@ extern void ata_acpi_on_resume(struct ata_port *ap);
extern int ata_acpi_on_devcfg(struct ata_device *dev);
extern void ata_acpi_on_disable(struct ata_device *dev);
extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
-extern int ata_acpi_register(void);
-extern void ata_acpi_unregister(void);
-extern void ata_acpi_bind(struct ata_device *dev);
-extern void ata_acpi_unbind(struct ata_device *dev);
-extern void ata_acpi_hotplug_init(struct ata_host *host);
+extern void ata_acpi_bind_port(struct ata_port *ap);
+extern void ata_acpi_bind_dev(struct ata_device *dev);
+extern acpi_handle ata_dev_acpi_handle(struct ata_device *dev);
+extern void ata_scsi_acpi_bind(struct ata_device *dev);
+extern void ata_scsi_acpi_unbind(struct ata_device *dev);
#else
static inline void ata_acpi_dissociate(struct ata_host *host) { }
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
@@ -131,11 +131,10 @@ static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; }
static inline void ata_acpi_on_disable(struct ata_device *dev) { }
static inline void ata_acpi_set_state(struct ata_port *ap,
pm_message_t state) { }
-static inline int ata_acpi_register(void) { return 0; }
-static inline void ata_acpi_unregister(void) { }
-static inline void ata_acpi_bind(struct ata_device *dev) { }
-static inline void ata_acpi_unbind(struct ata_device *dev) { }
-static inline void ata_acpi_hotplug_init(struct ata_host *host) {}
+static inline void ata_acpi_bind_port(struct ata_port *ap) {}
+static inline void ata_acpi_bind_dev(struct ata_device *dev) {}
+static inline void ata_scsi_acpi_bind(struct ata_device *dev) {}
+static inline void ata_scsi_acpi_unbind(struct ata_device *dev) {}
#endif
/* libata-scsi.c */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 09723b76beac..73212c9c6d5b 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -39,7 +39,7 @@ static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pata_acpi *acpi = ap->private_data;
- if (ata_ap_acpi_handle(ap) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
+ if (ACPI_HANDLE(&ap->tdev) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
return -ENODEV;
return ata_sff_prereset(link, deadline);
@@ -195,7 +195,7 @@ static int pacpi_port_start(struct ata_port *ap)
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pata_acpi *acpi;
- if (ata_ap_acpi_handle(ap) == NULL)
+ if (ACPI_HANDLE(&ap->tdev) == NULL)
return -ENODEV;
acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 848ed3254ddd..853f610af28f 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -654,7 +654,7 @@ static void arasan_cf_freeze(struct ata_port *ap)
ata_sff_freeze(ap);
}
-void arasan_cf_error_handler(struct ata_port *ap)
+static void arasan_cf_error_handler(struct ata_port *ap)
{
struct arasan_cf_dev *acdev = ap->host->private_data;
@@ -683,7 +683,7 @@ static void arasan_cf_dma_start(struct arasan_cf_dev *acdev)
ata_sff_queue_work(&acdev->work);
}
-unsigned int arasan_cf_qc_issue(struct ata_queued_cmd *qc)
+static unsigned int arasan_cf_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct arasan_cf_dev *acdev = ap->host->private_data;
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 8d493b4a0961..d59d5239405f 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -271,7 +271,7 @@ static int __init pata_at32_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct at32_ide_info *info;
- struct ide_platform_data *board = pdev->dev.platform_data;
+ struct ide_platform_data *board = dev_get_platdata(&pdev->dev);
struct resource *res;
int irq;
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 5364f97b42c6..d63ee8f41a4f 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -315,7 +315,7 @@ static struct ata_port_operations pata_at91_port_ops = {
static int pata_at91_probe(struct platform_device *pdev)
{
- struct at91_cf_data *board = pdev->dev.platform_data;
+ struct at91_cf_data *board = dev_get_platdata(&pdev->dev);
struct device *dev = &pdev->dev;
struct at91_ide_info *info;
struct resource *mem_res;
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index dcc6b243e525..1ec53f8ca96f 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -48,7 +48,7 @@ static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev,
u16 *buf16 = (u16 *) buf;
struct ata_port *ap = dev->link->ap;
void __iomem *mmio = ap->ioaddr.data_addr;
- struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
+ struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
/* set the expansion bus in 16bit mode and restore
* 8 bit mode after the transaction.
@@ -143,7 +143,7 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
struct resource *cs0, *cs1;
struct ata_host *host;
struct ata_port *ap;
- struct ixp4xx_pata_data *data = pdev->dev.platform_data;
+ struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index e73bef3093d2..c51bbb9ea8e8 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -1037,7 +1037,7 @@ static void octeon_cf_shutdown(struct device *dev)
union cvmx_mio_boot_dma_cfgx dma_cfg;
union cvmx_mio_boot_dma_intx dma_int;
- struct octeon_cf_port *cf_port = dev->platform_data;
+ struct octeon_cf_port *cf_port = dev_get_platdata(dev);
if (cf_port->dma_base) {
/* Stop and clear the dma engine. */
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 71e093767f4e..02794885de10 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -180,7 +180,7 @@ static int pata_platform_probe(struct platform_device *pdev)
struct resource *io_res;
struct resource *ctl_res;
struct resource *irq_res;
- struct pata_platform_info *pp_info = pdev->dev.platform_data;
+ struct pata_platform_info *pp_info = dev_get_platdata(&pdev->dev);
/*
* Simple resource validation ..
diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
index 942ef94b29e6..a6f05acad61e 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -238,7 +238,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
struct resource *ctl_res;
struct resource *dma_res;
struct resource *irq_res;
- struct pata_pxa_pdata *pdata = pdev->dev.platform_data;
+ struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
int ret = 0;
/*
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index 6ef27e98c508..898e544a7ae8 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -241,8 +241,8 @@ static u8 pata_s3c_check_altstatus(struct ata_port *ap)
/*
* pata_s3c_data_xfer - Transfer data by PIO
*/
-unsigned int pata_s3c_data_xfer(struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
+static unsigned int pata_s3c_data_xfer(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
{
struct ata_port *ap = dev->link->ap;
struct s3c_ide_info *info = ap->host->private_data;
@@ -418,7 +418,7 @@ static struct ata_port_operations pata_s5p_port_ops = {
.set_piomode = pata_s3c_set_piomode,
};
-static void pata_s3c_enable(void *s3c_ide_regbase, bool state)
+static void pata_s3c_enable(void __iomem *s3c_ide_regbase, bool state)
{
u32 temp = readl(s3c_ide_regbase + S3C_ATA_CTRL);
temp = state ? (temp | 1) : (temp & ~1);
@@ -475,7 +475,7 @@ static void pata_s3c_hwinit(struct s3c_ide_info *info,
static int __init pata_s3c_probe(struct platform_device *pdev)
{
- struct s3c_ide_platdata *pdata = pdev->dev.platform_data;
+ struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev);
struct device *dev = &pdev->dev;
struct s3c_ide_info *info;
struct resource *res;
@@ -617,7 +617,7 @@ static int pata_s3c_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct ata_host *host = platform_get_drvdata(pdev);
- struct s3c_ide_platdata *pdata = pdev->dev.platform_data;
+ struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev);
struct s3c_ide_info *info = host->private_data;
pata_s3c_hwinit(info, pdata);
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index e9a4f46d962e..7f5e5d96327f 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -46,14 +46,19 @@
#define CR_BUSY 0x0001
#define CR_START 0x0001
#define CR_WR_RDN 0x0002
+#define CPHY_TX_INPUT_STS 0x2001
#define CPHY_RX_INPUT_STS 0x2002
-#define CPHY_SATA_OVERRIDE 0x4000
-#define CPHY_OVERRIDE 0x2005
+#define CPHY_SATA_TX_OVERRIDE 0x8000
+#define CPHY_SATA_RX_OVERRIDE 0x4000
+#define CPHY_TX_OVERRIDE 0x2004
+#define CPHY_RX_OVERRIDE 0x2005
#define SPHY_LANE 0x100
#define SPHY_HALF_RATE 0x0001
#define CPHY_SATA_DPLL_MODE 0x0700
#define CPHY_SATA_DPLL_SHIFT 8
#define CPHY_SATA_DPLL_RESET (1 << 11)
+#define CPHY_SATA_TX_ATTEN 0x1c00
+#define CPHY_SATA_TX_ATTEN_SHIFT 10
#define CPHY_PHY_COUNT 6
#define CPHY_LANE_COUNT 4
#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT)
@@ -66,6 +71,7 @@ struct phy_lane_info {
void __iomem *phy_base;
u8 lane_mapping;
u8 phy_devs;
+ u8 tx_atten;
};
static struct phy_lane_info port_data[CPHY_PORT_COUNT];
@@ -76,9 +82,11 @@ static DEFINE_SPINLOCK(sgpio_lock);
#define SGPIO_PINS 3
#define SGPIO_PORTS 8
-/* can be cast as an ahci_host_priv for compatibility with most functions */
struct ecx_plat_data {
u32 n_ports;
+ /* number of extra clocks that the SGPIO PIC controller expects */
+ u32 pre_clocks;
+ u32 post_clocks;
unsigned sgpio_gpio[SGPIO_PINS];
u32 sgpio_pattern;
u32 port_to_sgpio[SGPIO_PORTS];
@@ -155,6 +163,9 @@ static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state,
spin_lock_irqsave(&sgpio_lock, flags);
ecx_parse_sgpio(pdata, ap->port_no, state);
sgpio_out = pdata->sgpio_pattern;
+ for (i = 0; i < pdata->pre_clocks; i++)
+ ecx_led_cycle_clock(pdata);
+
gpio_set_value(pdata->sgpio_gpio[SLOAD], 1);
ecx_led_cycle_clock(pdata);
gpio_set_value(pdata->sgpio_gpio[SLOAD], 0);
@@ -167,6 +178,8 @@ static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state,
sgpio_out >>= 1;
ecx_led_cycle_clock(pdata);
}
+ for (i = 0; i < pdata->post_clocks; i++)
+ ecx_led_cycle_clock(pdata);
/* save off new led state for port/slot */
emp->led_state = state;
@@ -201,6 +214,11 @@ static void highbank_set_em_messages(struct device *dev,
of_property_read_u32_array(np, "calxeda,led-order",
pdata->port_to_sgpio,
pdata->n_ports);
+ if (of_property_read_u32(np, "calxeda,pre-clocks", &pdata->pre_clocks))
+ pdata->pre_clocks = 0;
+ if (of_property_read_u32(np, "calxeda,post-clocks",
+ &pdata->post_clocks))
+ pdata->post_clocks = 0;
/* store em_loc */
hpriv->em_loc = 0;
@@ -259,8 +277,27 @@ static void highbank_cphy_disable_overrides(u8 sata_port)
if (unlikely(port_data[sata_port].phy_base == NULL))
return;
tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
- tmp &= ~CPHY_SATA_OVERRIDE;
- combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+ tmp &= ~CPHY_SATA_RX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
+}
+
+static void cphy_override_tx_attenuation(u8 sata_port, u32 val)
+{
+ u8 lane = port_data[sata_port].lane_mapping;
+ u32 tmp;
+
+ if (val & 0x8)
+ return;
+
+ tmp = combo_phy_read(sata_port, CPHY_TX_INPUT_STS + lane * SPHY_LANE);
+ tmp &= ~CPHY_SATA_TX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp |= CPHY_SATA_TX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN;
+ combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
}
static void cphy_override_rx_mode(u8 sata_port, u32 val)
@@ -268,21 +305,21 @@ static void cphy_override_rx_mode(u8 sata_port, u32 val)
u8 lane = port_data[sata_port].lane_mapping;
u32 tmp;
tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
- tmp &= ~CPHY_SATA_OVERRIDE;
- combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+ tmp &= ~CPHY_SATA_RX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
- tmp |= CPHY_SATA_OVERRIDE;
- combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+ tmp |= CPHY_SATA_RX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
tmp &= ~CPHY_SATA_DPLL_MODE;
tmp |= val << CPHY_SATA_DPLL_SHIFT;
- combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
tmp |= CPHY_SATA_DPLL_RESET;
- combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
tmp &= ~CPHY_SATA_DPLL_RESET;
- combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
msleep(15);
}
@@ -299,16 +336,20 @@ static void highbank_cphy_override_lane(u8 sata_port)
lane * SPHY_LANE);
} while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
cphy_override_rx_mode(sata_port, 3);
+ cphy_override_tx_attenuation(sata_port, port_data[sata_port].tx_atten);
}
static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
{
struct device_node *sata_node = dev->of_node;
- int phy_count = 0, phy, port = 0;
+ int phy_count = 0, phy, port = 0, i;
void __iomem *cphy_base[CPHY_PHY_COUNT];
struct device_node *phy_nodes[CPHY_PHY_COUNT];
+ u32 tx_atten[CPHY_PORT_COUNT];
+
memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT);
memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT);
+ memset(tx_atten, 0xff, CPHY_PORT_COUNT);
do {
u32 tmp;
@@ -336,6 +377,10 @@ static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
of_node_put(phy_data.np);
port += 1;
} while (port < CPHY_PORT_COUNT);
+ of_property_read_u32_array(sata_node, "calxeda,tx-atten",
+ tx_atten, port);
+ for (i = 0; i < port; i++)
+ port_data[i].tx_atten = (u8) tx_atten[i];
return 0;
}
@@ -479,6 +524,9 @@ static int ahci_highbank_probe(struct platform_device *pdev)
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
+ if (hpriv->cap & HOST_CAP_64)
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 35c6b6d09c27..56be31819897 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -553,10 +553,15 @@ struct mv_host_priv {
u32 irq_mask_offset;
u32 unmask_all_irqs;
-#if defined(CONFIG_HAVE_CLK)
+ /*
+ * Needed on some devices that require their clocks to be enabled.
+ * These are optional: if the platform device does not have any
+ * clocks, they won't be used. Also, if the underlying hardware
+ * does not support the common clock framework (CONFIG_HAVE_CLK=n),
+ * all the clock operations become no-ops (see clk.h).
+ */
struct clk *clk;
struct clk **port_clks;
-#endif
/*
* These consistent DMA memory pools give us guaranteed
* alignment for hardware-accessed data structures,
@@ -4032,9 +4037,7 @@ static int mv_platform_probe(struct platform_device *pdev)
struct resource *res;
int n_ports = 0, irq = 0;
int rc;
-#if defined(CONFIG_HAVE_CLK)
int port;
-#endif
ata_print_version_once(&pdev->dev, DRV_VERSION);
@@ -4058,7 +4061,7 @@ static int mv_platform_probe(struct platform_device *pdev)
of_property_read_u32(pdev->dev.of_node, "nr-ports", &n_ports);
irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
} else {
- mv_platform_data = pdev->dev.platform_data;
+ mv_platform_data = dev_get_platdata(&pdev->dev);
n_ports = mv_platform_data->n_ports;
irq = platform_get_irq(pdev, 0);
}
@@ -4068,13 +4071,11 @@ static int mv_platform_probe(struct platform_device *pdev)
if (!host || !hpriv)
return -ENOMEM;
-#if defined(CONFIG_HAVE_CLK)
hpriv->port_clks = devm_kzalloc(&pdev->dev,
sizeof(struct clk *) * n_ports,
GFP_KERNEL);
if (!hpriv->port_clks)
return -ENOMEM;
-#endif
host->private_data = hpriv;
hpriv->n_ports = n_ports;
hpriv->board_idx = chip_soc;
@@ -4084,7 +4085,6 @@ static int mv_platform_probe(struct platform_device *pdev)
resource_size(res));
hpriv->base -= SATAHC0_REG_BASE;
-#if defined(CONFIG_HAVE_CLK)
hpriv->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(hpriv->clk))
dev_notice(&pdev->dev, "cannot get optional clkdev\n");
@@ -4098,7 +4098,6 @@ static int mv_platform_probe(struct platform_device *pdev)
if (!IS_ERR(hpriv->port_clks[port]))
clk_prepare_enable(hpriv->port_clks[port]);
}
-#endif
/*
* (Re-)program MBUS remapping windows if we are asked to.
@@ -4124,7 +4123,6 @@ static int mv_platform_probe(struct platform_device *pdev)
return 0;
err:
-#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(hpriv->clk)) {
clk_disable_unprepare(hpriv->clk);
clk_put(hpriv->clk);
@@ -4135,7 +4133,6 @@ err:
clk_put(hpriv->port_clks[port]);
}
}
-#endif
return rc;
}
@@ -4151,13 +4148,10 @@ err:
static int mv_platform_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
-#if defined(CONFIG_HAVE_CLK)
struct mv_host_priv *hpriv = host->private_data;
int port;
-#endif
ata_host_detach(host);
-#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(hpriv->clk)) {
clk_disable_unprepare(hpriv->clk);
clk_put(hpriv->clk);
@@ -4168,7 +4162,6 @@ static int mv_platform_remove(struct platform_device *pdev)
clk_put(hpriv->port_clks[port]);
}
}
-#endif
return 0;
}
@@ -4428,9 +4421,6 @@ static int mv_pci_device_resume(struct pci_dev *pdev)
#endif
#endif
-static int mv_platform_probe(struct platform_device *pdev);
-static int mv_platform_remove(struct platform_device *pdev);
-
static int __init mv_init(void)
{
int rc = -ENODEV;
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 8108eb065444..c2d95e9fb971 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -778,10 +778,6 @@ static int sata_rcar_probe(struct platform_device *pdev)
int irq;
int ret = 0;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (mem == NULL)
- return -EINVAL;
-
irq = platform_get_irq(pdev, 0);
if (irq <= 0)
return -EINVAL;
@@ -807,6 +803,7 @@ static int sata_rcar_probe(struct platform_device *pdev)
host->private_data = priv;
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(priv->base)) {
ret = PTR_ERR(priv->base);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index d545931c85eb..d1549b74e2d1 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -68,28 +68,6 @@ static struct scsi_host_sg_pool scsi_sg_pools[] = {
struct kmem_cache *scsi_sdb_cache;
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-
-static bool acpi_scsi_bus_match(struct device *dev)
-{
- return dev->bus == &scsi_bus_type;
-}
-
-int scsi_register_acpi_bus_type(struct acpi_bus_type *bus)
-{
- bus->match = acpi_scsi_bus_match;
- return register_acpi_bus_type(bus);
-}
-EXPORT_SYMBOL_GPL(scsi_register_acpi_bus_type);
-
-void scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus)
-{
- unregister_acpi_bus_type(bus);
-}
-EXPORT_SYMBOL_GPL(scsi_unregister_acpi_bus_type);
-#endif
-
/*
* When to reinvoke queueing after a resource shortage. It's 3 msecs to
* not change behaviour from the previous unplug mechanism, experimentation
diff --git a/include/linux/ata.h b/include/linux/ata.h
index ee0bd9524055..bf4c69ca76df 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -239,6 +239,8 @@ enum {
ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E,
ATA_CMD_FPDMA_READ = 0x60,
ATA_CMD_FPDMA_WRITE = 0x61,
+ ATA_CMD_FPDMA_SEND = 0x64,
+ ATA_CMD_FPDMA_RECV = 0x65,
ATA_CMD_PIO_READ = 0x20,
ATA_CMD_PIO_READ_EXT = 0x24,
ATA_CMD_PIO_WRITE = 0x30,
@@ -293,8 +295,13 @@ enum {
/* marked obsolete in the ATA/ATAPI-7 spec */
ATA_CMD_RESTORE = 0x10,
+ /* Subcmds for ATA_CMD_FPDMA_SEND */
+ ATA_SUBCMD_FPDMA_SEND_DSM = 0x00,
+ ATA_SUBCMD_FPDMA_SEND_WR_LOG_DMA_EXT = 0x02,
+
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
+ ATA_LOG_NCQ_SEND_RECV = 0x13,
ATA_LOG_SATA_ID_DEV_DATA = 0x30,
ATA_LOG_SATA_SETTINGS = 0x08,
ATA_LOG_DEVSLP_OFFSET = 0x30,
@@ -305,6 +312,15 @@ enum {
ATA_LOG_DEVSLP_VALID = 0x07,
ATA_LOG_DEVSLP_VALID_MASK = 0x80,
+ /* NCQ send and receive log */
+ ATA_LOG_NCQ_SEND_RECV_SUBCMDS_OFFSET = 0x00,
+ ATA_LOG_NCQ_SEND_RECV_SUBCMDS_DSM = (1 << 0),
+ ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET = 0x04,
+ ATA_LOG_NCQ_SEND_RECV_DSM_TRIM = (1 << 0),
+ ATA_LOG_NCQ_SEND_RECV_RD_LOG_OFFSET = 0x08,
+ ATA_LOG_NCQ_SEND_RECV_WR_LOG_OFFSET = 0x0C,
+ ATA_LOG_NCQ_SEND_RECV_SIZE = 0x10,
+
/* READ/WRITE LONG (obsolete) */
ATA_CMD_READ_LONG = 0x22,
ATA_CMD_READ_LONG_ONCE = 0x23,
@@ -446,22 +462,6 @@ enum {
SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state trans. error */
SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */
SERR_DEV_XCHG = (1 << 26), /* device exchanged */
-
- /* struct ata_taskfile flags */
- ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */
- ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
- ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */
- ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
- ATA_TFLAG_LBA = (1 << 4), /* enable LBA */
- ATA_TFLAG_FUA = (1 << 5), /* enable FUA */
- ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */
-
- /* protocol flags */
- ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */
- ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */
- ATA_PROT_FLAG_DATA = ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
- ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */
- ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */
};
enum ata_tf_protocols {
@@ -488,83 +488,6 @@ struct ata_bmdma_prd {
__le32 flags_len;
};
-struct ata_taskfile {
- unsigned long flags; /* ATA_TFLAG_xxx */
- u8 protocol; /* ATA_PROT_xxx */
-
- u8 ctl; /* control reg */
-
- u8 hob_feature; /* additional data */
- u8 hob_nsect; /* to support LBA48 */
- u8 hob_lbal;
- u8 hob_lbam;
- u8 hob_lbah;
-
- u8 feature;
- u8 nsect;
- u8 lbal;
- u8 lbam;
- u8 lbah;
-
- u8 device;
-
- u8 command; /* IO operation */
-};
-
-/*
- * protocol tests
- */
-static inline unsigned int ata_prot_flags(u8 prot)
-{
- switch (prot) {
- case ATA_PROT_NODATA:
- return 0;
- case ATA_PROT_PIO:
- return ATA_PROT_FLAG_PIO;
- case ATA_PROT_DMA:
- return ATA_PROT_FLAG_DMA;
- case ATA_PROT_NCQ:
- return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
- case ATAPI_PROT_NODATA:
- return ATA_PROT_FLAG_ATAPI;
- case ATAPI_PROT_PIO:
- return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
- case ATAPI_PROT_DMA:
- return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
- }
- return 0;
-}
-
-static inline int ata_is_atapi(u8 prot)
-{
- return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
-}
-
-static inline int ata_is_nodata(u8 prot)
-{
- return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
-}
-
-static inline int ata_is_pio(u8 prot)
-{
- return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
-}
-
-static inline int ata_is_dma(u8 prot)
-{
- return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
-}
-
-static inline int ata_is_ncq(u8 prot)
-{
- return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
-}
-
-static inline int ata_is_data(u8 prot)
-{
- return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
-}
-
/*
* id tests
*/
@@ -865,6 +788,11 @@ static inline int ata_id_rotation_rate(const u16 *id)
return val;
}
+static inline bool ata_id_has_ncq_send_and_recv(const u16 *id)
+{
+ return id[ATA_ID_SATA_CAPABILITY_2] & BIT(6);
+}
+
static inline bool ata_id_has_trim(const u16 *id)
{
if (ata_id_major_version(id) >= 7 &&
@@ -1060,15 +988,6 @@ static inline unsigned ata_set_lba_range_entries(void *_buffer,
return used_bytes;
}
-static inline int is_multi_taskfile(struct ata_taskfile *tf)
-{
- return (tf->command == ATA_CMD_READ_MULTI) ||
- (tf->command == ATA_CMD_WRITE_MULTI) ||
- (tf->command == ATA_CMD_READ_MULTI_EXT) ||
- (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
- (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
-}
-
static inline bool ata_ok(u8 status)
{
return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4ea55bb45deb..0e23c26485f4 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -138,6 +138,22 @@ enum {
ATA_SHT_THIS_ID = -1,
ATA_SHT_USE_CLUSTERING = 1,
+ /* struct ata_taskfile flags */
+ ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */
+ ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
+ ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */
+ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
+ ATA_TFLAG_LBA = (1 << 4), /* enable LBA */
+ ATA_TFLAG_FUA = (1 << 5), /* enable FUA */
+ ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */
+
+ /* protocol flags */
+ ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */
+ ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */
+ ATA_PROT_FLAG_DATA = ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
+ ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */
+ ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */
+
/* struct ata_device stuff */
ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */
ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */
@@ -156,6 +172,7 @@ enum {
ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */
ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */
ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */
+ ATA_DFLAG_NCQ_SEND_RECV = (1 << 19), /* device supports NCQ SEND and RECV */
ATA_DFLAG_INIT_MASK = (1 << 24) - 1,
ATA_DFLAG_DETACH = (1 << 24),
@@ -207,6 +224,7 @@ enum {
ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */
ATA_FLAG_AN = (1 << 18), /* controller supports AN */
ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */
+ ATA_FLAG_FPDMA_AUX = (1 << 20), /* controller supports H2DFIS aux field */
ATA_FLAG_EM = (1 << 21), /* driver supports enclosure
* management */
ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity
@@ -518,6 +536,33 @@ enum sw_activity {
BLINK_OFF,
};
+struct ata_taskfile {
+ unsigned long flags; /* ATA_TFLAG_xxx */
+ u8 protocol; /* ATA_PROT_xxx */
+
+ u8 ctl; /* control reg */
+
+ u8 hob_feature; /* additional data */
+ u8 hob_nsect; /* to support LBA48 */
+ u8 hob_lbal;
+ u8 hob_lbam;
+ u8 hob_lbah;
+
+ u8 feature;
+ u8 nsect;
+ u8 lbal;
+ u8 lbam;
+ u8 lbah;
+
+ u8 device;
+
+ u8 command; /* IO operation */
+
+ u32 auxiliary; /* auxiliary field */
+ /* from SATA 3.1 and */
+ /* ATA-8 ACS-3 */
+};
+
#ifdef CONFIG_ATA_SFF
struct ata_ioports {
void __iomem *cmd_addr;
@@ -660,6 +705,9 @@ struct ata_device {
/* DEVSLP Timing Variables from Identify Device Data Log */
u8 devslp_timing[ATA_LOG_DEVSLP_SIZE];
+ /* NCQ send and receive log subcommand support */
+ u8 ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_SIZE];
+
/* error history */
int spdn_cnt;
/* ering is CLEAR_END, read comment above CLEAR_END */
@@ -959,6 +1007,69 @@ extern const unsigned long sata_deb_timing_long[];
extern struct ata_port_operations ata_dummy_port_ops;
extern const struct ata_port_info ata_dummy_port_info;
+/*
+ * protocol tests
+ */
+static inline unsigned int ata_prot_flags(u8 prot)
+{
+ switch (prot) {
+ case ATA_PROT_NODATA:
+ return 0;
+ case ATA_PROT_PIO:
+ return ATA_PROT_FLAG_PIO;
+ case ATA_PROT_DMA:
+ return ATA_PROT_FLAG_DMA;
+ case ATA_PROT_NCQ:
+ return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
+ case ATAPI_PROT_NODATA:
+ return ATA_PROT_FLAG_ATAPI;
+ case ATAPI_PROT_PIO:
+ return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
+ case ATAPI_PROT_DMA:
+ return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
+ }
+ return 0;
+}
+
+static inline int ata_is_atapi(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
+}
+
+static inline int ata_is_nodata(u8 prot)
+{
+ return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
+}
+
+static inline int ata_is_pio(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
+}
+
+static inline int ata_is_dma(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
+}
+
+static inline int ata_is_ncq(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
+}
+
+static inline int ata_is_data(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
+}
+
+static inline int is_multi_taskfile(struct ata_taskfile *tf)
+{
+ return (tf->command == ATA_CMD_READ_MULTI) ||
+ (tf->command == ATA_CMD_WRITE_MULTI) ||
+ (tf->command == ATA_CMD_READ_MULTI_EXT) ||
+ (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
+ (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
+}
+
static inline const unsigned long *
sata_ehc_deb_timing(struct ata_eh_context *ehc)
{
@@ -1142,8 +1253,6 @@ int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
const struct ata_acpi_gtm *gtm);
-acpi_handle ata_ap_acpi_handle(struct ata_port *ap);
-acpi_handle ata_dev_acpi_handle(struct ata_device *dev);
int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm);
#else
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
@@ -1497,6 +1606,13 @@ static inline int ata_ncq_enabled(struct ata_device *dev)
ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
}
+static inline bool ata_fpdma_dsm_supported(struct ata_device *dev)
+{
+ return (dev->flags & ATA_DFLAG_NCQ_SEND_RECV) &&
+ (dev->ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &
+ ATA_LOG_NCQ_SEND_RECV_DSM_TRIM);
+}
+
static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
{
qc->tf.ctl |= ATA_NIEN;