diff options
51 files changed, 273 insertions, 363 deletions
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index 81534d04094b..b71a20af5f70 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -85,9 +85,8 @@ properties: CPU power good signal from external PMIC to PMC is enabled. nvidia,suspend-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] description: The suspend mode that the platform should use. Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml index b195457006cc..5e2a2394e600 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml +++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml @@ -40,28 +40,25 @@ properties: calxeda,led-order: description: Maps port numbers to offsets within the SGPIO bitstream. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 calxeda,port-phys: description: | phandle-combophy and lane assignment, which maps each SATA port to a combophy and a lane within that combophy - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 8 + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 8 calxeda,tx-atten: description: | Contains TX attenuation override codes, one per port. The upper 24 bits of each entry are always 0 and thus ignored. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 calxeda,sgpio-gpio: description: | diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml index d6a3b71ea835..68b0131a31d0 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml @@ -71,8 +71,8 @@ examples: bus@1f059000 { compatible = "baikal,bt1-apb", "simple-bus"; - reg = <0 0x1f059000 0 0x1000>, - <0 0x1d000000 0 0x2040000>; + reg = <0x1f059000 0x1000>, + <0x1d000000 0x2040000>; reg-names = "ehb", "nodev"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml index 203bc0e5346b..29e1aaea132b 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml @@ -85,8 +85,8 @@ examples: bus@1f05a000 { compatible = "baikal,bt1-axi", "simple-bus"; - reg = <0 0x1f05a000 0 0x1000>, - <0 0x1f04d110 0 0x8>; + reg = <0x1f05a000 0x1000>, + <0x1f04d110 0x8>; reg-names = "qos", "ehb"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml index 429e3b62b965..92a8e545e212 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml index 135568c46350..c97bf95b4150 100644 --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml index fa55f1ce3e57..de48924be191 100644 --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml index 982d698e8c54..e50cddee43c3 100644 --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml index 3c779eea6394..36ce7667c972 100644 --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml index 1695e3e4bcec..ed8148e26e24 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml @@ -106,8 +106,8 @@ examples: #include <dt-bindings/power/rk3288-power.h> vopb: vopb@ff930000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff930000 0x0 0x19c>, - <0x0 0xff931000 0x0 0x1000>; + reg = <0xff930000 0x19c>, + <0xff931000 0x1000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index 04a3c51e1dc1..1240f6289249 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -63,11 +63,10 @@ patternProperties: snps,nr-gpios: description: The number of GPIO pins exported by the port. + $ref: /schemas/types.yaml#/definitions/uint32 default: 32 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - maximum: 32 + minimum: 1 + maximum: 32 interrupts: description: | diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml index 98baecb4b98a..208faaffa58d 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -67,8 +67,7 @@ properties: 1 - direct_sync 2 - scaled_sync 3 - pulse_sync - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml index efd2eba5f23c..e201a06d8fdc 100644 --- a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml @@ -25,9 +25,8 @@ properties: amstaos,cover-comp-gain: description: Multiplier for gain compensation - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 16] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 16] required: - compatible diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml index f0242bb4be81..9c154e5e1a91 100644 --- a/Documentation/devicetree/bindings/input/iqs269a.yaml +++ b/Documentation/devicetree/bindings/input/iqs269a.yaml @@ -40,10 +40,9 @@ properties: posed on channels 6 and 7 by Hall-effect sensing. azoteq,suspend-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: | Specifies the power mode during suspend as follows: 0: Automatic (same as normal runtime, i.e. suspend/resume disabled) @@ -56,11 +55,10 @@ properties: description: Divides the device's core clock by a factor of 4. azoteq,ulp-update: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 7 - default: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 3 description: Specifies the ultra-low-power mode update rate. azoteq,reseed-offset: @@ -70,34 +68,30 @@ properties: reseed events. azoteq,filt-str-lp-lta: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: Specifies the long-term average filter strength during low-power mode. azoteq,filt-str-lp-cnt: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: Specifies the raw count filter strength during low-power mode. azoteq,filt-str-np-lta: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: Specifies the long-term average filter strength during normal-power mode. azoteq,filt-str-np-cnt: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: Specifies the raw count filter strength during normal-power mode. @@ -156,11 +150,10 @@ properties: description: Disables all raw count filtering. azoteq,gpio3-select: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 7 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 0 description: Selects the channel for which the GPIO3 pin represents touch state. @@ -172,10 +165,9 @@ properties: in either direction. azoteq,tx-freq: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: | Specifies the inductive sensing excitation frequency as follows (paren- thesized numbers represent the frequency if 'azoteq,clk-div' is present): @@ -189,10 +181,9 @@ properties: description: Increases the global capacitance adder from 0.5 pF to 1.5 pF. azoteq,reseed-select: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: | Specifies the event(s) that prompt the device to reseed (i.e. reset the long-term average) of an associated channel as follows: @@ -208,10 +199,9 @@ properties: channels. azoteq,filt-str-slider: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 description: Specifies the slider coordinate filter strength. patternProperties: @@ -246,27 +236,25 @@ patternProperties: description: Specifies that the channel participates in slider 1. azoteq,rx-enable: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 description: Specifies the CRX pin(s) associated with the channel. By default, only the CRX pin corresponding to the channel's index is enabled (e.g. CRX0 for channel 0). azoteq,tx-enable: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 - items: - minimum: 0 - maximum: 7 - default: [0, 1, 2, 3, 4, 5, 6, 7] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + default: [0, 1, 2, 3, 4, 5, 6, 7] description: Specifies the TX pin(s) associated with the channel. azoteq,meas-cap-decrease: @@ -279,10 +267,9 @@ patternProperties: description: Floats any inactive CRX pins instead of grounding them. azoteq,local-cap-size: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 description: | Specifies the capacitance to be added to the channel as follows: 0: None @@ -296,10 +283,9 @@ patternProperties: deep-touch events relative to their respective thresholds. azoteq,proj-bias: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 2 description: | Specifies the bias current applied during projected-capacitance sensing as follows: @@ -309,10 +295,9 @@ patternProperties: 3: 20 uA azoteq,sense-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 9, 14, 15] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 9, 14, 15] + default: 0 description: | Specifies the channel's sensing mode as follows: 0: Self capacitance @@ -322,10 +307,9 @@ patternProperties: 15: Temperature azoteq,sense-freq: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 description: | Specifies the channel's sensing frequency as follows (parenthesized numbers represent the frequency if 'azoteq,clk-div' is present): @@ -339,10 +323,9 @@ patternProperties: description: Enables the static front-end for the channel. azoteq,ati-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 3 description: | Specifies the channel's ATI mode as follows: 0: Disabled @@ -351,39 +334,35 @@ patternProperties: 3: Full azoteq,ati-base: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [75, 100, 150, 200] - default: 100 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [75, 100, 150, 200] + default: 100 description: Specifies the channel's ATI base. azoteq,ati-target: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - multipleOf: 32 - minimum: 0 - maximum: 2016 - default: 512 + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + default: 512 description: Specifies the channel's ATI target. azoteq,assoc-select: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 description: Specifies the associated channels for which the channel serves as a reference channel. By default, no channels are selected. azoteq,assoc-weight: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 255 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 description: Specifies the channel's impact weight if it acts as an associated channel (0 = 0% impact, 255 = 200% impact). @@ -411,11 +390,10 @@ patternProperties: properties: azoteq,thresh: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 255 - default: 10 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 10 description: Specifies the threshold for the event. linux,code: @@ -430,19 +408,17 @@ patternProperties: properties: azoteq,thresh: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 255 - default: 8 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 8 description: Specifies the threshold for the event. azoteq,hyst: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 4 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 4 description: Specifies the hysteresis for the event. linux,code: @@ -457,19 +433,17 @@ patternProperties: properties: azoteq,thresh: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 255 - default: 26 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 26 description: Specifies the threshold for the event. azoteq,hyst: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 description: Specifies the hysteresis for the event. linux,code: diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml index 1a5ebbdd219a..1b256d9dd92a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml @@ -25,19 +25,17 @@ properties: description: u32 value of the base of parent HyperTransport vector allocated to PCH MSI. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 255 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 255 loongson,msi-num-vecs: description: u32 value of the number of parent HyperTransport vectors allocated to PCH MSI. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 1 - maximum: 256 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 256 msi-controller: true diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml index 274adea13f33..a6dcbb2971a9 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml @@ -25,10 +25,9 @@ properties: description: u32 value of the base of parent HyperTransport vector allocated to PCH PIC. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 192 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 192 interrupt-controller: true diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml index f0bb157e9417..58fa76ee6176 100644 --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml @@ -31,9 +31,8 @@ properties: reg-size: description: The access width of the register in bytes. Defaults to 1. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4, 8] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] reg-spacing: $ref: /schemas/types.yaml#/definitions/uint32 @@ -43,9 +42,8 @@ properties: description: | The amount of bits to shift the register content to the right to get the data into bit zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 56 + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 56 required: - compatible diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml index 01c7d93dc658..32e0896c6bc1 100644 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -57,8 +57,7 @@ properties: description: | mA; per-string current limit. This property is supported only for WLED3. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 20 minimum: 0 maximum: 25 @@ -74,38 +73,33 @@ properties: qcom,current-boost-limit: description: | mA; boost current limit. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 qcom,switching-freq: description: | kHz; switching frequency. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] qcom,ovp: description: | V; Over-voltage protection limit. This property is supported only for WLED3. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 27, 29, 32, 35 ] - - default: 29 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 27, 29, 32, 35 ] + default: 29 qcom,ovp-millivolt: description: | Over-voltage protection limit. This property is for WLED4 only. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 18100, 19600, 29600, 31100 ] - - default: 29600 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 18100, 19600, 29600, 31100 ] + default: 29600 qcom,num-strings: description: | number of led strings attached. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 qcom,enabled-strings: description: | @@ -113,8 +107,7 @@ properties: string of leds are operated individually. Specify the list of strings used by the device. Any combination of led strings can be used. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 4 @@ -150,10 +143,9 @@ properties: 0 - Modulator A 1 - Modulator B This property is applicable only to WLED5 peripheral. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 qcom,cabc-sel: description: | @@ -164,9 +156,8 @@ properties: 2 - CABC 2 3 - External signal (e.g. LPG) is used for dimming This property is applicable only to WLED5 peripheral. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] allOf: - if: diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml index f118721df1e8..e24b0d15ef01 100644 --- a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml +++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml @@ -32,8 +32,7 @@ properties: patternProperties: "^led@[0-2]$": type: object - allOf: - - $ref: common.yaml# + $ref: common.yaml# properties: reg: diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml index ecf7ac9ab067..f68259619488 100644 --- a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml +++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml @@ -33,8 +33,7 @@ properties: led: type: object - allOf: - - $ref: common.yaml# + $ref: common.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml index 0f7451b42d7e..26a5cca3f838 100644 --- a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml @@ -51,7 +51,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> mailbox: mailbox@400a0000 { compatible = "sprd,sc9860-mailbox"; - reg = <0 0x400a0000 0 0x8000>, <0 0x400a8000 0 0x8000>; + reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>; #mbox-cells = <1>; clock-names = "enable"; clocks = <&aon_gate 53>; diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml index d6af685ad3ca..1956b2a32bf4 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml @@ -79,8 +79,7 @@ properties: - const: 4 link-frequencies: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-array + $ref: /schemas/types.yaml#/definitions/uint64-array description: Allowed data bus frequencies. 360000000, 180000000 Hz or both are supported by the driver. diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml index 0c68cdad9a31..8d35c327018b 100644 --- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml +++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml @@ -61,7 +61,7 @@ examples: vdec: video-codec@ff660000 { compatible = "rockchip,rk3399-vdec"; - reg = <0x0 0xff660000 0x0 0x400>; + reg = <0xff660000 0x400>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>; diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index 27df18ad6a81..2b629456d75f 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -66,7 +66,7 @@ examples: vpu: video-codec@ff9a0000 { compatible = "rockchip,rk3288-vpu"; - reg = <0x0 0xff9a0000 0x0 0x800>; + reg = <0xff9a0000 0x800>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vepu", "vdpu"; diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml index 9b478da0c479..17ba45a6c260 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml @@ -45,9 +45,8 @@ patternProperties: maxItems: 255 ingenic,nemc-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [8, 16] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] description: Specifies the bus width in bits. ingenic,nemc-tAS: diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml index db8f115a13ec..cb9794edff24 100644 --- a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml @@ -53,7 +53,7 @@ examples: - | nfc: nand-controller@ff100000 { compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10"; - reg = <0x0 0xff100000 0x0 0x1000>; + reg = <0xff100000 0x1000>; clock-names = "controller", "bus"; clocks = <&clk200>, <&clk100>; interrupt-parent = <&gic>; diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 71d9e6c1c72e..174579370a22 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -145,8 +145,7 @@ patternProperties: "^cpts@[0-9a-f]+": type: object - allOf: - - $ref: "ti,k3-am654-cpts.yaml#" + $ref: "ti,k3-am654-cpts.yaml#" description: CPSW Common Platform Time Sync (CPTS) module. diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index 50e027911dd4..9b7117920d90 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -74,15 +74,13 @@ properties: - const: cpts ti,cpts-ext-ts-inputs: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 8 description: Number of hardware timestamp push inputs (HWx_TS_PUSH) ti,cpts-periodic-outputs: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 8 description: Number of timestamp Generator function outputs (TS_GENFx) @@ -123,7 +121,7 @@ examples: cpts@310d0000 { compatible = "ti,am65-cpts"; - reg = <0x0 0x310d0000 0x0 0x400>; + reg = <0x310d0000 0x400>; reg-names = "cpts"; clocks = <&main_cpts_mux>; clock-names = "cpts"; diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml index 6150a7a7bdbf..016a5f61592d 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml @@ -15,8 +15,7 @@ allOf: properties: cdns,max-outbound-regions: description: maximum number of outbound regions - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 32 default: 32 diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml index c87a3a36ccd2..303078a7b7a8 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -16,8 +16,7 @@ allOf: properties: cdns,max-outbound-regions: description: maximum number of outbound regions - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 32 default: 32 diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml index 16a8bd7644bf..41ee16e21f8d 100644 --- a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml +++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml @@ -29,9 +29,8 @@ properties: phydev: description: device ID for programming the ComboPHY. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 31 required: - compatible diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index 973b2d196f46..f80f8896d527 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -44,6 +44,8 @@ properties: "#size-cells": enum: [ 1, 2 ] + ranges: true + clocks: minItems: 1 maxItems: 4 @@ -87,6 +89,7 @@ required: - "#clock-cells" - "#address-cells" - "#size-cells" + - ranges - clocks - clock-names - resets @@ -281,10 +284,11 @@ examples: #include <dt-bindings/clock/qcom,gcc-sdm845.h> usb_2_qmpphy: phy-wrapper@88eb000 { compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x18c>; + reg = <0x088eb000 0x18c>; #clock-cells = <1>; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x088eb000 0x2000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, @@ -299,11 +303,11 @@ examples: vdda-phy-supply = <&vdda_usb2_ss_1p2>; vdda-pll-supply = <&vdda_usb2_ss_core>; - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x128>, - <0 0x088eb400 0 0x1fc>, - <0 0x088eb800 0 0x218>, - <0 0x088eb600 0 0x70>; + usb_2_ssphy: phy@200 { + reg = <0x200 0x128>, + <0x400 0x1fc>, + <0x800 0x218>, + <0x600 0x70>; #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index b770e637df1d..6e2487501457 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -34,6 +34,8 @@ properties: "#size-cells": enum: [ 1, 2 ] + ranges: true + clocks: items: - description: Phy aux clock. @@ -86,6 +88,7 @@ required: - "#clock-cells" - "#address-cells" - "#size-cells" + - ranges - clocks - clock-names - resets @@ -100,12 +103,13 @@ examples: #include <dt-bindings/clock/qcom,gcc-sdm845.h> usb_1_qmpphy: phy-wrapper@88e9000 { compatible = "qcom,sdm845-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x10>; + reg = <0x088e9000 0x18c>, + <0x088e8000 0x10>; reg-names = "reg-base", "dp_com"; #clock-cells = <1>; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x088e9000 0x1000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, @@ -120,17 +124,17 @@ examples: vdda-phy-supply = <&vdda_usb2_ss_1p2>; vdda-pll-supply = <&vdda_usb2_ss_core>; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x128>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x128>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + phy@200 { + reg = <0x200 0x128>, + <0x400 0x200>, + <0xc00 0x218>, + <0x600 0x128>, + <0x800 0x200>, + <0xa00 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 574f890fab1d..4949a2851532 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -65,7 +65,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8150.h> phy@88e2000 { compatible = "qcom,sm8150-usb-hs-phy"; - reg = <0 0x088e2000 0 0x400>; + reg = <0x088e2000 0x400>; #phy-cells = <0>; clocks = <&rpmhcc RPMH_CXO_CLK>; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml index f459eaf55278..68cf9dd0390d 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml @@ -52,9 +52,8 @@ properties: description: | Enable/disable spread spectrum clock (ssc). 0 or the property doesn't exist means disabling the ssc. The actual value will be -<value> ppm. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 4003, 4492, 4980 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 4003, 4492, 4980 ] required: - compatible diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index 4a265d4234b9..2036977ecc2f 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -27,11 +27,9 @@ properties: of this binary blob is kept secret by CellWise. The only way to obtain it is to mail two batteries to a test facility of CellWise and receive back a test report with the binary blob. - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - items: - - minItems: 64 - maxItems: 64 + $ref: /schemas/types.yaml#definitions/uint8-array + minItems: 64 + maxItems: 64 cellwise,monitor-interval-ms: description: @@ -41,10 +39,9 @@ properties: power-supplies: description: Specifies supplies used for charging the battery connected to this gauge - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 8 # Should be enough + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 8 # Should be enough monitored-battery: description: diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml index 205bc826bd20..a90b3601e695 100644 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml @@ -32,16 +32,14 @@ properties: description: The number of times to retry I2C transactions on I2C IO failure. default: 0 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 sbs,poll-retry-count: description: The number of times to try looking for new status after an external change notification. default: 0 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 sbs,battery-detect-gpios: description: diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml index 4b62af27d4b3..01df06777cba 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml @@ -30,13 +30,11 @@ properties: items: - description: SoC PWM ipg clock - description: SoC PWM per clock - maxItems: 2 clock-names: items: - const: ipg - const: per - maxItems: 2 interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml index 19cbd5eb2897..78c0b63243f7 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml @@ -21,8 +21,7 @@ properties: regulators: type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# description: | list of regulators provided by this controller, must be named after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST @@ -30,13 +29,11 @@ properties: patternProperties: "^LDO([1-9]|1[0-5])$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^BUCK|BUCKBOOST$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml index d797cc23406f..07256a4b50b9 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -29,8 +29,7 @@ description: | patternProperties: "^LDO[1-6]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# description: Properties for single LDO regulator. @@ -44,8 +43,7 @@ patternProperties: "^BUCK[1-6]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# description: Properties for single BUCK regulator. @@ -56,28 +54,25 @@ patternProperties: should be "buck1", ..., "buck6" rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. diff --git a/Documentation/devicetree/bindings/rng/arm-cctrng.yaml b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml index ca6aad19b6ba..c471e4c10558 100644 --- a/Documentation/devicetree/bindings/rng/arm-cctrng.yaml +++ b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml @@ -28,10 +28,8 @@ properties: description: Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators. Sampling ratio values for these 4 ring oscillators. (from calibration) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - maxItems: 4 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 4 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 32a5e1e30833..96414ac65d06 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -33,9 +33,8 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 4 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 4 ] clocks: minItems: 2 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index dee8bb2b69fe..a2b29cc3e93b 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -100,8 +100,7 @@ patternProperties: supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. - allOf: - - $ref: /spi/spi-controller.yaml# + $ref: /spi/spi-controller.yaml# properties: compatible: @@ -126,8 +125,7 @@ patternProperties: "i2c@[0-9a-f]+$": type: object description: GENI serial engine based I2C controller. - allOf: - - $ref: /schemas/i2c/i2c-controller.yaml# + $ref: /schemas/i2c/i2c-controller.yaml# properties: compatible: @@ -156,8 +154,7 @@ patternProperties: "serial@[0-9a-f]+$": type: object description: GENI Serial Engine based UART Controller. - allOf: - - $ref: /schemas/serial.yaml# + $ref: /schemas/serial.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml index 73cdcf053a9c..32d547af9ce7 100644 --- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml @@ -45,23 +45,20 @@ properties: - const: ctx3_tx firmware-name: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - const: imx/easrc/easrc-imx8mn.bin + $ref: /schemas/types.yaml#/definitions/string + const: imx/easrc/easrc-imx8mn.bin description: The coefficient table for the filters fsl,asrc-rate: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 8000 - - maximum: 192000 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 8000 + maximum: 192000 description: Defines a mutual sample rate used by DPCM Back Ends fsl,asrc-format: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 6, 10, 32, 36] - default: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 6, 10, 32, 36] + default: 2 description: Defines a mutual sample format used by DPCM Back Ends @@ -83,7 +80,7 @@ examples: easrc: easrc@300c0000 { compatible = "fsl,imx8mn-easrc"; - reg = <0x0 0x300c0000 0x0 0x10000>; + reg = <0x300c0000 0x10000>; interrupts = <0x0 122 0x4>; clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; clock-names = "mem"; diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index cb2bb5fac0e1..8132d0c0f00a 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -13,15 +13,13 @@ definitions: frame-master: description: Indicates dai-link frame master. - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 bitclock-master: description: Indicates dai-link bit clock master - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 frame-inversion: description: dai-link uses frame clock inversion diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index c5b5b4260496..2e6ac5d2ee96 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -76,13 +76,12 @@ properties: PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 4 - items: - maximum: 1 - default: [0, 0, 0, 0] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + maximum: 1 + default: [0, 0, 0, 0] ti,gpi-config: description: | @@ -102,13 +101,12 @@ properties: 7 - GPIX is configured as a PDM data input for channel 7 and channel (PDMDIN4) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 4 - items: - maximum: 7 - default: [0, 0, 0, 0] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + maximum: 7 + default: [0, 0, 0, 0] required: - compatible diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml index bb9594bb2cf1..553c9dcdaeeb 100644 --- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml @@ -28,9 +28,8 @@ properties: const: 0 socionext,tmod-calibration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 description: A pair of calibrated values referred from PVT, in case that the values aren't set on SoC, like a reference board. diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index ccc67d03d4bb..e4e83d3971ac 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -52,21 +52,18 @@ properties: vhub-vendor-id: description: vhub Vendor ID - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 65535 + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 65535 vhub-product-id: description: vhub Product ID - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 65535 + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 65535 vhub-device-revision: description: vhub Device Revision in binary-coded decimal - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 65535 + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 65535 vhub-strings: type: object @@ -90,18 +87,15 @@ properties: manufacturer: description: vhub manufacturer - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string product: description: vhub product name - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string serial-number: description: vhub device serial number - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string required: - compatible diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index c4ddc0adf101..0073763a30d8 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -64,13 +64,11 @@ properties: - const: hs_src power-domains: - maxItems: 2 items: - description: XUSBB(device) power-domain - description: XUSBA(superspeed) power-domain power-domain-names: - maxItems: 2 items: - const: dev - const: ss diff --git a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml index bec651541e0c..8e4c7c69bc1c 100644 --- a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml @@ -17,8 +17,7 @@ properties: enum: - arm,smc-wdt arm,smc-id: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | The ATF smc function id used by the firmware. Defaults to 0x82003D06 if unset. diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile index ef85f8b7d4a7..0b44917f981c 100644 --- a/scripts/dtc/Makefile +++ b/scripts/dtc/Makefile @@ -20,6 +20,9 @@ endif HOST_EXTRACFLAGS += -DNO_YAML else dtc-objs += yamltree.o +# To include <yaml.h> installed in a non-default path +HOSTCFLAGS_yamltree.o := $(shell pkg-config --cflags yaml-0.1) +# To link libyaml installed in a non-default path HOSTLDLIBS_dtc := $(shell pkg-config yaml-0.1 --libs) endif |