1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
# Copyright (C) 2019 Texas Instruments Incorporated
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
maintainers:
- Dan Murphy <dmurphy@ti.com>
description: |
The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
PDM microphones recording), high-performance audio, analog-to-digital
converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
family supports line and microphone Inputs, and offers a programmable
microphone bias or supply voltage generation.
Specifications can be found at:
http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
properties:
compatible:
oneOf:
- const: ti,tlv320adc3140
- const: ti,tlv320adc5140
- const: ti,tlv320adc6140
reg:
maxItems: 1
description: |
I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
reset-gpios:
description: |
GPIO used for hardware reset.
areg-supply:
description: |
Regulator with AVDD at 3.3V. If not defined then the internal regulator
is enabled.
ti,mic-bias-source:
description: |
Indicates the source for MIC Bias.
0 - Mic bias is set to VREF
1 - Mic bias is set to VREF × 1.096
6 - Mic bias is set to AVDD
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 6]
ti,vref-source:
description: |
Indicates the source for MIC Bias.
0 - Set VREF to 2.75V
1 - Set VREF to 2.5V
2 - Set VREF to 1.375V
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
ti,pdm-edge-select:
description: |
Defines the PDMCLK sampling edge configuration for the PDM inputs. This
array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>.
0 - (default) Odd channel is latched on the negative edge and even
channel is latched on the the positive edge.
1 - Odd channel is latched on the positive edge and even channel is
latched on the the negative edge.
PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 4
items:
maximum: 1
default: [0, 0, 0, 0]
ti,gpi-config:
description: |
Defines the configuration for the general purpose input pins (GPI).
The array is defined as <GPI1 GPI2 GPI3 GPI4>.
0 - (default) disabled
1 - GPIX is configured as a general-purpose input (GPI)
2 - GPIX is configured as a master clock input (MCLK)
3 - GPIX is configured as an ASI input for daisy-chain (SDIN)
4 - GPIX is configured as a PDM data input for channel 1 and channel
(PDMDIN1)
5 - GPIX is configured as a PDM data input for channel 3 and channel
(PDMDIN2)
6 - GPIX is configured as a PDM data input for channel 5 and channel
(PDMDIN3)
7 - GPIX is configured as a PDM data input for channel 7 and channel
(PDMDIN4)
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 4
items:
maximum: 7
default: [0, 0, 0, 0]
required:
- compatible
- reg
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
codec: codec@4c {
compatible = "ti,tlv320adc5140";
reg = <0x4c>;
ti,mic-bias-source = <6>;
ti,pdm-edge-select = <0 1 0 1>;
ti,gpi-config = <4 5 6 7>;
reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
};
|
